CA Disk Backup and Restore 12.5 1 CA RS 1309 Service List Description Hiper 12.5 RO22741 OPEN SVC ZAP IFG0196W AT HDZ1C10 FOR Z/OS 1.12 RO48374 ISPF REPORT VSAM DATA/INDEX COMPONENTS DISPLAY CAT N RO54254 ENHANCEMENT: ADD 3 MORE DATA FLAGS TO DSNINDEX FLAG6 RO55794 DMSAR ABEND 0C4 WHEN THE SYSIN UNIT=VIO RO56319 Deallocation error on DIM install RO56629 IXMAINT UNCAT FAIL RC=28 RS=40 FOR VSAM WITH AIX RO56944 FALLBACK COMPATIBILITY AND TOLERATION GDG PHASE I RO57169 MOVE REDUCE MULTI STRIPE TO SINGLE STIPE/OVER ALLOCATION RO57446 ENHANCEMENT: ADD HSMREPLY FOR HSMGEN1/2 The CA RS 1309 service count for this release is 9
CA Disk Backup and Restore 2 CA RS 1309 Service List for CCUWC50 FMID Service Description Hiper CCUWC50 RO22741 OPEN SVC ZAP IFG0196W AT HDZ1C10 FOR Z/OS 1.12 RO48374 ISPF REPORT VSAM DATA/INDEX COMPONENTS DISPLAY CAT N RO54254 ENHANCEMENT: ADD 3 MORE DATA FLAGS TO DSNINDEX FLAG6 RO55794 DMSAR ABEND 0C4 WHEN THE SYSIN UNIT=VIO RO56319 Deallocation error on DIM install RO56629 IXMAINT UNCAT FAIL RC=28 RS=40 FOR VSAM WITH AIX RO56944 FALLBACK COMPATIBILITY AND TOLERATION GDG PHASE I RO57169 MOVE REDUCE MULTI STRIPE TO SINGLE STIPE/OVER ALLOCATION RO57446 ENHANCEMENT: ADD HSMREPLY FOR HSMGEN1/2 The CA RS 1309 service count for this FMID is 9
CA Disk Backup and Restore 12.5 3 CA RS 1309 - PTF RO22741 12.5 RO22741 RO22741 M.C.S. ENTRIES = ++PTF(RO22741) DESC (OPEN SVC ZAP IFG0196W AT HDZ1C10 FOR Z/OS 1.12). After upgrading to z/os 1.12 at FMID HDZ1C10, the operating system intercept at IFG0196W fails to apply. CA Disk is unable to maintain IBM SU 60 and CA Disk fields in the format 1 DSCB and exempt tasks from causing data sets to appear used after opening them. Data sets may appear as ineligible for ARCHIVE or BACKUP processing. The operating system intercept at IFG0196W fails and CA Disk is unable to control the Last Used Date field and the Change Bit in the Format 1 DSCB in the VTOC. None. RELATED PROBLEM(S): 12061
CA Disk Backup and Restore 12.5 4 CA RS 1309 - PTF RO48374 12.5 RO48374 RO48374 M.C.S. ENTRIES = ++PTF(RO48374) DESC(ISPF REPORT VSAM DATA/INDEX COMPONENTS DISPLAY CAT N). PRE(RO18565) SUP(T5YR215) ISPF REPORT VSAM DATA/INDEX with COMPONENTS, wrong catalog indicator in DMS REPORT. The catalog indicator is N, which is not correct. The following messages are issued: DATA SET NAME CAT VOLSER -------------------------------------------- --- ------ abc.def.vsam.data N vol001 abc.def.vsam.index N vol001 The CATALOG value N in SPFRPTS report is incorrect and misleading. None RELATED PROBLEM(S): 12203
CA Disk Backup and Restore 12.5 5 CA RS 1309 - PTF RO54254 12.5 RO54254 RO54254 M.C.S. ENTRIES = ++PTF(RO54254) DESC(ENHANCEMENT: ADD 3 MORE DATA FLAGS TO DSNINDEX FLAG6). PRE(RO18279 RO21408 RO35998 RO44051 RO44103 RO53055) SUP(T5YR227) This enhancement added support for an Empty data set flag in the DSNINDEX. Empty data sets are now flagged as empty in the DSNINDEX. The LISTD FIELDS parameter was updated to include the EMPTY flag, DSNINDEX Renamed flag, and the Archived with NEWNAME or NEWHLQ flag from DSNINDEX Flag 6. The ISPF Archived Data Set Index Selection Screen was updated to display the three flags from DSNINDEX Flag 6. N/A N/A N/A RELATED PROBLEM(S): 12230 ++HOLD(RO54254) SYSTEM REASON(DOC) FMID(CCUWC50) COMMENT( Product: CA Disk Release 12.5 Publication: CA Disk Systems Guide Chapter 3 "Datacom Operations" In section "Batch SQL Reporting for Database Only", update "DBQDSI - SQL Field Names for DSI table (DSNINDEX)" to include ARCHIVE with NEWNAME or NEWHLQ and EMPTY DATA SET. DSNFLAG6 Flagbyte 6: X'80' primary2 DSNINDEX X'40' DSNINDEX renamed X'20' fast archive X'10' ARCHIVE with NEWNAME or NEWHLQ X'08' EMPTY DATA SET Chapter 15 "Record Formats" Update section "Subfile Record Format - (DSNINDEX)" to include ARCHIVE with NEWNAME or NEWHLQ and EMPTY DATA SET. DSNFLAG6 X +93 FLAG BYTE 6 DSNP2 EQU X'80'..PRIMARY2 DSNINDEX DSNRENMD EQU X'40'..DSNINDEX RENAMED DSNFAST EQU X'20'..FAST ARCHIVE DSNNEWNM EQU X'10'..ARCHIVE with NEWNAME or NEWHLQ DNSEMPTY EQU X'08'..EMPTY DATA SET Product: CA Disk Release 12.5 Publication: CA Disk User Guide Chapter 10 "FILES Maintenance" Update section "Possible Values for LISTD FIELDS= Parameter" to add NEWNM and EMPTY. FLAG6B FLAG6 in binary format DSNFLAG6 FLAG6 FLAG BYTE 6 FLGP2 FLAG6 Bit 0-PRIMARY2 RECORD RENM FLAG6 Bit 1-DSNINDEX Renamed FAST FLAG6 Bit 2-Fast DSNINDEX Record NEWNM FLAG6 Bit 3-Archive with NEWNAME or NEWHLQ EMPTY FLAG6 Bit 4-Empty data set Same Chapter, Update section "LISTD Flags" to add x'10' and x'08'
CA Disk Backup and Restore 12.5 6 CA RS 1309 - PTF RO54254 Sixth 1000 80 PRIMARY2 record 0000 0100 40 Data set in DFNINDEX was renamed 0000 0010 20 Fast Archive 0000 0001 10 Archive with NEWNAME or NEWHLQ 0000 0000 08 Empty data set 1000 ).
CA Disk Backup and Restore 12.5 7 CA RS 1309 - PTF RO55794 12.5 RO55794 RO55794 M.C.S. ENTRIES = ++PTF(RO55794) DESC(DMSAR ABEND 0C4 WHEN THE SYSIN UNIT=VIO). SUP(T5YR234) A S0C4 ABEND occurs in Auto Restore in IBM module IGG0193B at offset 2F54 when DMSAR opens the SYSIN DD and the UNIT is defined as VIO. The following messages were issued in the Job log: IEC999I IGG0193B,DMSAR,DMSAR PET203I SYSTEM ABEND(S0C4) REASON(00000004) AT PSW(078C0000 80D08F54). PET206I ABEND OCCURRED AT PGM(SVC019.SVC019) *** SUPERVISOR SERVICE REGISTERS ORIGINATING PSW(078D1000 00122448). GPR0-3... 000000B8 000B0A90 008CA028 00D07B84 GPR4-7... 008CAD60 008CA39C 008CA344 008CA39C GPR8-11.. 008CA364 008CFC74 00000000 000B0B00 GPR12-15. 00D08B83 008CA2C8 00D0868C 00000000 PET205I ABEND OCCURRED FROM PGM(ADSDM152.ADSDM152+000410) EPI(01/15/10 The Archived data set cannot be restored. None RELATED PROBLEM(S): 12244
CA Disk Backup and Restore 12.5 8 CA RS 1309 - PTF RO56319 12.5 RO56319 RO56319 M.C.S. ENTRIES = ++PTF(RO56319) DESC(Deallocation error on DIM install). SUP(T268094 T5YR155) DMSAR install ends with RC=00, but message 2433 was generated at the end of the execution. The messages are produced in error and should not be generated. The following messages are issued: Reported Rel: 12.0 Earliest Affected Rel: 12.0 Amended Rel: ADSUT098 2433 --------------------------------------------------------- ADSUT098 2433 S99R15RC => 4 ADSUT098 2433 S99ERRCD => 0438 ADSUT098 2433 S99INFCD => 0000 ADSUT098 2433 --------------------------------------------------------- ADSUT098 2433 DDNAME= The 2433 messages are misleading. None RELATED PROBLEM(S): 12029
CA Disk Backup and Restore 12.5 9 CA RS 1309 - PTF RO56629 12.5 RO56629 RO56629 M.C.S. ENTRIES = ++PTF(RO56629) DESC(IXMAINT UNCAT FAIL RC=28 RS=40 FOR VSAM WITH AIX). SUP(T5YR224) When running IXMAINT DSNDELETE against a VSAM DSN with a related VSAM AIX component, the DSNINDEX record is deleted but all VSAM components remain cataloged including the AIX on the pseudo volume. The UNCATALOG error message 0552 is generated in MSGPRINT. The following MSGPRINT is issued. ADSDM502*0552 UNCATALOG OF dsn FROM ARCIVE FAILED - R15= 28 R0= 40 - CONSULT IBM CATALG MACRO RETURN CODES. The Pseudo-volume catalog entry remains when there is no archive index. records. Use IDCAMS DELETE PURGE to remove pseudo-volume entries. RELATED PROBLEM(S): 12231
CA Disk Backup and Restore 12.5 10 CA RS 1309 - PTF RO56944 12.5 RO56944 RO56944 M.C.S. ENTRIES = ++PTF(RO56944) DESC(FALLBACK COMPATIBILITY AND TOLERATION GDG PHASE I). PRE(RO24962) This PTF fixes three problems with the original MAINTAIN GDG CATALOG STRUCTURE PHASE I. 1) Further toleration for future GDG Phase 2 Enhancement 2) Module ADSAR001, when installing the ADSAR026 hook, doesn't copy the ISC module name from the parameter list, causing ADSAR001 to not copy the sysparms to the storage for ADSAR026. 3) Module ADSAR026 issues a number of diagnostic messages for jobs that match the value of ARDIAGNM sysparm, but the message number of the diagnostics are the same as the messages issued by ADSAR010 making it difficult to determine which message is issued by which module. 1) The data set would be processed incorrectly with unpredictable results. 2) Installation Sysparms values would not be used. 3) Diagnostic messages would be issued with the same message number. 1) Unpredictable results processing GDG disposition at Restore time. 2) Diagnostic messages not being issued, and the RECATVOL would be defaulted to ARCIVE causing data sets cataloged to MIGRAT/DISK to appear to be cataloged to ARCIVE rather than RECATVOL. 3) It would appear that duplicate messages were being issued, and it would make analysis of the messages difficult. 1) None. 2) None. 3) None RELATED PROBLEM(S): 12249
CA Disk Backup and Restore 12.5 11 CA RS 1309 - PTF RO57169 12.5 RO57169 RO57169 M.C.S. ENTRIES = ++PTF(RO57169) DESC(MOVE REDUCE MULTI STRIPE TO SINGLE STIPE/OVER ALLOCATION). PRE(RO45771) SUP(T5YR229) Using the MOVE REDUCE,TRACK command to move a multi stripe dataset to a single stripe data set, if the primary allocation contains few tracks and the secondary allocation has a large value, the resulting file allocation after the MOVE may be larger than the original file allocation size. The file allocation size after the MOVE may be larger than the original allocation. More extents are allocated to the target file. None RELATED PROBLEM(S): 12237
CA Disk Backup and Restore 12.5 12 CA RS 1309 - PTF RO57446 12.5 RO57446 RO57446 M.C.S. ENTRIES = ++PTF(RO57446) DESC(ENHANCEMENT: ADD HSMREPLY FOR HSMGEN1/2). PRE(RO37466) SUP(T5YR223) This enhancement added HSMREPLY for HSM conversion to CA Disk utility. It allows the operator to terminate the HSMGEN1 and HSMGEN2 conversion jobs gracefully through an operator reply. N/A N/A N/A RELATED PROBLEM(S): 12225 ++HOLD(RO57446) SYSTEM REASON(DOC) FMID(CCUWC50) COMMENT( Product: CA Disk Release 12.5 Publication: Message Reference Guide Chapter 3 Messages 4500-4599 range. Add Message 4570 in numeric sequence. 4570 REPLY 'END' TO TERMINATE HSMGEN# PROCESSING Reason: You can optionally specify a system parameter HSMREPLY that allows the computer operator to terminate HSMGEN1 or HSMGEN2 conversion jobs before completion (a graceful shutdown). Message 4570 is issued to the operator at the beginning of the HSMGEN1 or HSMGEN2 conversion process. This option permits you to start HSMGEN1 or HSMGEN2 conversions and run until the resources are needed for something else. Thus HSMGEN1 or HSMGEN2 conversions can be run in otherwise unused machine time. Action: If the operator replies to the message to indicate that HSMGEN1 or HSMGEN2 conversion processing is to be stopped, a response of 'END' will terminate the job at the end of the current record. Processing will complete normally, and all reports and statistics will be generated as normal. Product: CA Disk Release 12.5 Publication: Installation Guide Appendix G: DFSMShsm to CA Disk Conversion Add 12. to the "Convert SDFSMShsm to CA Disk" procedure. 12. HSMGEN1 or HSMGEN2 Early Graceful Shutdown HSMGEN1 or HSMGEN2 conversion jobs can be shut down early and gracefully by using HSMREPLY. A graceful shutdown will allow the jobs to complete all current work in progress, and produce the normal reports of error conditions encountered and work successfully completed prior to early job termination. With HSMREPLY active, message "4570 REPLY 'END' TO TERMINATE HSMGEN# PROCESSING" is issued to the operator at the beginning of the job and remains on the console for the duration of the job. If the operator replies END to this message, it indicates processing is to be stopped early. ).