Upgrding from vrelize Automtion 7.1, 7.2 to 7.3 or 7.1, 7.2, 7.3 to 7.3.1 15 Mrch 2018 vrelize Automtion 7.3
You cn find the most up-to-dte technicl documenttion on the VMwre wesite t: https://docs.vmwre.com/ If you hve comments out this documenttion, sumit your feedck to docfeedck@vmwre.com VMwre, Inc. 3401 Hillview Ave. Plo Alto, CA 94304 www.vmwre.com Copyright 2008 2018 VMwre, Inc. All rights reserved. Copyright nd trdemrk informtion. VMwre, Inc. 2
Contents Updted Informtion 6 1 Upgrding vrelize Automtion 7.1, 7.2 to 7.3 or 7.1, 7.2,7.3 to 7.3.1 7 Prerequisites for Upgrding vrelize Automtion 7 Checklist for Upgrding vrelize Automtion 9 2 Upgrding VMwre Products Integrted with vrelize Automtion 11 Upgrding vrelize Opertions Mnger Integrted with vrelize Automtion 11 Upgrding vrelize Log Insight Integrted with vrelize Automtion 12 Upgrding vrelize Business for Cloud Integrted with vrelize Automtion 12 3 Prepring to Upgrde vrelize Automtion 13 Run NSX Network nd Security Inventory Dt Collection Before You Upgrde vrelize Automtion 13 Bckup Prerequisites for Upgrding vrelize Automtion 13 Bck Up Your Existing vrelize Automtion Environment 14 Set the vrelize Automtion PostgreSQL Repliction Mode to Asynchronous 16 Downloding vrelize Automtion Applince Updtes 16 Downlod Virtul Applince Updtes for Use with CD-ROM Drive 16 Downlod vrelize Automtion Applince Updtes from VMwre Repository 17 4 Updting the vrelize Automtion Applince nd IS Components 19 Instll the Updte on the vrelize Automtion Applince nd IS Components 19 5 Upgrding the IS Server Components Seprtely If the Updte Process Fils 23 Upgrde IS Components Using the Upgrde Shell Script After Upgrding the vrelize Automtion Applince 23 Upgrding IS Components Using the IS Instller Executle File After Upgrding the vrelize Automtion Applince 25 Downlod the IS Instller to Upgrde IS Components After Upgrding the vrelize Automtion Applince 25 Upgrde the IS Components After Upgrding the vrelize Automtion Applince 26 Restore Access to the Built-In vrelize Orchestrtor Control Center 30 6 Upgrding vrelize Orchestrtor After Upgrding vrelize Automtion 32 Migrting n Externl vrelize Orchestrtor Server to vrelize Automtion 32 Control Center Differences Between Externl nd Emedded Orchestrtor 33 VMwre, Inc. 3
Migrte n Externl vrelize Orchestrtor to vrelize Automtion 33 Configure the Built-In vrelize Orchestrtor Server 37 Upgrding Stnd-Alone vrelize Orchestrtor Applince for vrelize Automtion 38 Upgrde Orchestrtor Applince y Using the Defult VMwre Repository 39 Upgrde Orchestrtor Applince y Using n ISO Imge 40 Upgrde Orchestrtor Applince y Using Specified Repository 42 Upgrde vrelize Orchestrtor Applince Cluster for Use with vrelize Automtion 7.3 44 7 Enle Your Lod Blncers 46 8 Post-Upgrde Tsks 47 Set the vrelize Automtion PostgreSQL Repliction Mode to Synchronous 47 Run Test Connection nd Verify Upgrded Endpoints 48 Run NSX Network nd Security Inventory Dt Collection After You Upgrde vrelize Automtion 49 Join Replic Applince to Cluster 49 Port Configurtion for High-Avilility Deployments 49 Reconfigure the Built-In vrelize Orchestrtor to Support High Avilility 50 Restore Externl Workflow Timeout Files 50 Enling the Connect to Remote Console Action for Consumers 51 Restore Chnges to Logging in the pp.config File 51 Enle Automtic Mnger Service Filover After Upgrde 51 Aout Automtic Mnger Service Filover 51 9 Trouleshooting the vrelize Automtion Upgrde 53 Automtic Mnger Service Filover Does Not Activte 54 Instlltion or Upgrde Fils with Lod Blncer Timeout Error 56 Upgrde Fils for IS Wesite Component 56 Mnger Service Fils to Run Due to SSL Vlidtion Errors During Runtime 58 Log In Fils After Upgrde 59 Delete Orphned Nodes on vrelize Automtion 59 Join Cluster Commnd Appers to Fil After Upgrding High-Avilility Environment 59 PostgreSQL Dtse Upgrde Merge Does Not Succeed 60 Replic vrelize Automtion Applince Fils to Updte 60 Bckup Copies of.xml Files Cuse the System to Time Out 62 Exclude Mngement Agents from Upgrde 62 Unle to Crete New Directory in vrelize Automtion 62 vrelize Automtion Replic Virtul Applince Updte Times Out 63 Some Virtul Mchines Do Not Hve Deployment Creted During Upgrde 64 Certificte Not Trusted Error 64 Instlling or Upgrding vrelize Automtion Fils 65 Unle to Updte DEM nd DEO Components 65 Updte Fils to Upgrde the Mngement Agent 65 VMwre, Inc. 4
Mngement Agent Upgrde is Unsuccessful 66 Empty Deployments Are Seen in vrelize Automtion After Upgrde 67 After Reooting the Virtul Applince, Automtic IS Upgrde Fils nd Displys Pending Reoot Error 67 IS Repository Appliction Fils 67 Upgrding IS in High Avilility Environment Fils 68 VMwre, Inc. 5
Updted Informtion This Upgrding from vrelize Automtion 7.1 or 7.2 to 7.3 is updted with ech relese of the product or when necessry. This tle provides the updte history of Upgrding from vrelize Automtion 7.1 or 7.2 to 7.3. Revision Description 15 MAR 2018 Glol chnges to ccommodte upgrde to vrelize Automtion 7.3.1. 18 JAN 2018 Revised Automtic Mnger Service Filover Does Not Activte. Added After Reooting the Virtul Applince, Automtic IS Upgrde Fils nd Displys Pending Reoot Error. 04 DEC 2017 Added Empty Deployments Are Seen in vrelize Automtion After Upgrde. Revised Prerequisites for Upgrding vrelize Automtion. 07 AUG 2017 Added Empty Deployments Are Seen in vrelize Automtion After Upgrde. Added Restore Access to the Built-In vrelize Orchestrtor Control Center. Added Reconfigure the Built-In vrelize Orchestrtor to Support High Avilility. Revised Prerequisites for Upgrding vrelize Automtion. Added Unle to Updte DEM nd DEO Components. Revised Updte Fils to Upgrde the Mngement Agent 002424-01 Mde minor editoril updtes. Chnged title nd dded informtion to Run Test Connection nd Verify Upgrded Endpoints. Added vrelize Orchestrtor upgrde topics. Upgrding Stnd-Alone vrelize Orchestrtor Applince for vrelize Automtion Upgrde Orchestrtor Applince y Using the Defult VMwre Repository Upgrde Orchestrtor Applince y Using n ISO Imge Upgrde Orchestrtor Applince y Using Specified Repository Added vrelize Orchestrtor migrtion topics. Revised Instll the Updte on the vrelize Automtion Applince nd IS Components. Revised Certificte Not Trusted Error. Added Instlling or Upgrding vrelize Automtion Fils. 002424-00 Initil relese. VMwre, Inc. 6
Upgrding vrelize Automtion 7.1, 7.2 to 7.3 or 7.1, 7.2,7.3 to 7.3.1 1 You cn upgrde of your current vrelize Automtion 7.1 or 7.2 environment to 7.3. You cn lso upgrde your current vrelize Automtion 7.1, 7.2, 7.3 environment to 7.3.1. You use upgrde procedures specific to this version to upgrde your environment. An in-plce upgrde is three-stge process. You upgrde the components in your current environment in this order. 1 vrelize Automtion pplince 2 IS we server 3 vrelize Orchestrtor You must upgrde ll product components to the sme version. Beginning with vrelize Automtion 7.2, JFrog Artifctory Pro is no longer undled with the vrelize Automtion pplince. If you upgrde from n erlier version of vrelize Automtion, the upgrde process removes JFrog Artifctory Pro. For more informtion, see Knowledge Bse 2147237. This chpter includes the following topics: Prerequisites for Upgrding vrelize Automtion Checklist for Upgrding vrelize Automtion Prerequisites for Upgrding vrelize Automtion Before you upgrde vrelize Automtion 7.1, 7.2 to 7.3 or 7.1, 7.2, 7.3 to 7.3.1, review the following prerequisites. System Configurtion Requirements Verify tht the following prerequisites re finished efore you egin n upgrde. Verify tht ll pplinces nd servers tht re prt of your deployment meet the system requirements for the ltest version. See the vrelize Automtion Support Mtrix t VMwre vrelize Automtion Documenttion. Consult the VMwre Product Interoperility Mtrix on the VMwre wesite for informtion out comptiility with other VMwre products. VMwre, Inc. 7
Verify tht the vrelize Automtion you re upgrding from is in stle working condition. Correct ny prolems efore upgrding. Hrdwre Configurtion Requirements Verify tht the hrdwre in your environment is dequte for vrelize Automtion 7.3. See vrelize Automtion Hrdwre Specifictions nd Cpcity Mximums in Reference Architecture in the vrelize Automtion documenttion. Verify tht the following prerequisites re finished efore you egin n upgrde. You must hve t lest 18 GB RAM, 4 CPUs, Disk1=50 GB, Disk3=25 GB, nd Disk4=50 GB efore you run the upgrde. If the virtul mchine is on vcloud Networking nd Security, you might need to llocte more RAM spce. Although generl support for vcloud Networking nd Security 5.5.x (vcns) ended in Septemer 2016, the VCNS custom properties continue to e vlid for NSX purposes. See the VMwre Knowledge Bse rticle End of Avilility nd End of Generl Support for VMwre vcloud Networking nd Security 5.5.x (2144733) t http://k.vmwre.com/k/2144733 for more informtion. These nodes must hve t lest 5 GB of free disk spce: Primry IS Wesite Microsoft SQL dtse Model Mnger The primry IS Wesite node where the Model Mnger dt is instlled must hve JAVA SE Runtime Environment 8, 64 its, updte 161 or lter instlled. After you instll Jv, you must set the JAVA_HOME environment vrile to the new version. To downlod nd run the upgrde, you must hve the following resources: At lest 5 GB on the root prtition 5 GB on the /storge/d prtition for the mster vrelize Automtion pplince 5 GB on the root prtition for ech replic virtul pplince Check the /storge/log sufolder nd remove ny older rchived ZIP files to clen up spce. Generl Prerequisites Verify tht the following prerequisites re finished efore you egin n upgrde. You hve ccess to ll dtses nd ll lod lncers impcted y or prticipting in the vrelize Automtion upgrde. You mke the system unville to users while you perform the upgrde. You disle ny pplictions tht query vrelize Automtion. VMwre, Inc. 8
Verify tht Microsoft Distriuted Trnsction Coordintor (MSDTC) is enled on ll vrelize Automtion nd ssocited SQL servers. For instructions, see Knowledge Bse rticle 2089503. Complete these steps if you re upgrding distriuted environment configured with n emedded PostgreSQL dtse. c d Exmine the files in the pgdt directory on the mster host efore you upgrde the replic hosts. Nvigte to the PostgreSQL dt folder on the mster host t /vr/vmwre/vpostgres/current/pgdt/. Close ny opened files in the pgdt directory nd remove ny files with.swp suffix. Verify tht ll files in this directory hve correct ownership: postgres:users. In ddition, verify tht custom properties do not hve spces in their nmes. Before upgrding to this relese of vrelize Automtion, remove ny spce chrcters from your custom property nmes, for exmple replce the spce with n underscore chrcter, to llow the custom property to e recognized in the upgrded vrelize Automtion instlltion. vrelize Automtion custom property nmes cnnot contin spces. This issue cn impct use of n upgrded vrelize Orchestrtor instlltion tht uses custom properties tht contined spces in erlier releses of either vrelize Automtion or vrelize Orchestrtor or oth. Checklist for Upgrding vrelize Automtion When you upgrde your vrelize Automtion 7.1, 7.2 environment to 7.3 or your 7.1, 7.2, 7.3 environment to 7.3.1, you updte ll components in specific order. The order of upgrde vries depending on whether you re upgrding miniml environment or distriuted environment with multiple vrelize Automtion pplinces. Use the checklists to trck your work s you complete the upgrde. Finish the tsks in the order they re given. Tle 1 1. Checklist for Upgrding vrelize Automtion Miniml Environment Tsk Run NSX Network nd Security Inventory Dt Collection Before You Upgrde from vrelize Automtion 7.1 or 7.2 to 7.3.x. This is only required when vrelize Automtion is integrted with NSX. Bckup your current instlltion. This is criticl step. Instructions See Run NSX Network nd Security Inventory Dt Collection Before You Upgrde vrelize Automtion. For more informtion on how to ck up nd restore your system, see Bck Up Your Existing vrelize Automtion Environment. For generl informtion, see Configuring Bckup nd Restore y Using Symntec Netckup t http://www.vmwre.com/pdf/vrelize-ckup-nd-restorenetckup.pdf. VMwre, Inc. 9
Tle 1 1. Checklist for Upgrding vrelize Automtion Miniml Environment (Continued) Tsk Downlod updte to the vrelize Automtion pplince. Instll the updte on the vrelize Automtion pplince nd IS components. Instructions See Downloding vrelize Automtion Applince Updtes. See Instll the Updte on the vrelize Automtion Applince nd IS Components Tle 1 2. Checklist for Upgrding vrelize Automtion Distriuted Environment Tsk Run NSX Network nd Security Inventory Dt Collection Before You Upgrde from vrelize Automtion 7.1 or 7.2 to 7.3.x. This is only required when vrelize Automtion is integrted with NSX. Bck up your current instlltion. This is criticl step. Downlod updtes to the vrelize Automtion pplince. Set the vrelize Automtion PostgreSQL repliction mode to synchronous. Disle your lod lncer. Instll the updte on the mster vrelize Automtion pplince nd IS components. Instructions See Run NSX Network nd Security Inventory Dt Collection Before You Upgrde vrelize Automtion. For more informtion on how to ck up nd restore your system, see Bck Up Your Existing vrelize Automtion Environment. For detiled informtion, see Configuring Bckup nd Restore y Using Symntec Netckup t http://www.vmwre.com/pdf/vrelize-ckup-nd-restorenetckup.pdf See Downloding vrelize Automtion Applince Updtes. See Set the vrelize Automtion PostgreSQL Repliction Mode to Asynchronous. See your lod lncer documenttion. See Instll the Updte on the vrelize Automtion Applince nd IS Components. Note You must instll the updte on the mster pplince in distriuted environment.. Enle your lod lncer. Chpter 7 Enle Your Lod Blncers VMwre, Inc. 10
Upgrding VMwre Products Integrted with vrelize Automtion 2 You must mnge ny VMwre products integrted with your vrelize Automtion environment when you upgrde vrelize Automtion. If your vrelize Automtion environment is integrted with one or more dditionl products, you should upgrde vrelize Automtion efore you updte the dditionl products. If vrelize Business for Cloud is integrted with vrelize Automtion, you must unregister vrelize Business for Cloud efore you upgrde vrelize Automtion. Follow the suggested workflow for mnging integrted products when you upgrde vrelize Automtion. 1 Upgrde vrelize Automtion. 2 Upgrde VMwre vrelize Opertions Mnger nd pply the ltest mngement pck. 3 Upgrde VMwre vrelize Log Insight. 4 Upgrde VMwre vrelize Business for Cloud. This section provides dditionl guidnce for mnging vrelize Business for Cloud when it is integrted with your vrelize Automtion environment. This chpter includes the following topics: Upgrding vrelize Opertions Mnger Integrted with vrelize Automtion Upgrding vrelize Log Insight Integrted with vrelize Automtion Upgrding vrelize Business for Cloud Integrted with vrelize Automtion Upgrding vrelize Opertions Mnger Integrted with vrelize Automtion Upgrde vrelize Opertions Mnger fter you upgrde vrelize Automtion. Procedure 1 Upgrde vrelize Automtion. 2 Upgrde vrelize Opertions Mnger. For informtion, see Updting Your Softwre in the VMwre vrelize Opertions Mnger Documenttion. VMwre, Inc. 11
Upgrding vrelize Log Insight Integrted with vrelize Automtion Upgrde vrelize Log Insight fter you upgrde vrelize Automtion. Procedure 1 Upgrde vrelize Automtion. 2 Upgrde vrelize Log Insight. For informtion, see Upgrding vrelize Log Insight in the VMwre vrelize Log Insight Documenttion. Upgrding vrelize Business for Cloud Integrted with vrelize Automtion When you upgrde your vrelize Automtion environment, you must unregister nd register your connection to vrelize Business for Cloud. Perform this procedure to ensure continuity of service with vrelize Business for Cloud when you upgrde your vrelize Automtion environment. Procedure 1 Unregister vrelize Business for Cloud from vrelize Automtion. See Unregister vrelize Business for Cloud from vrelize Automtion in the vrelize Business for Cloud Documenttion. 2 Upgrde vrelize Automtion. 3 If necessry, upgrde vrelize Business for Cloud for Cloud. See Upgrding vrelize Business for Cloud in the vrelize Business for Cloud Documenttion. 4 Register vrelize Business for Cloud with vrelize Automtion. See Register vrelize Business for Cloud with vrelize Automtion in the vrelize Business for Cloud Documenttion. VMwre, Inc. 12
Prepring to Upgrde 3 vrelize Automtion Complete the preprtory tsks efore you upgrde vrelize Automtion 7.1, 7.2 to 7.3 or 7.1, 7.2, 7.3 to 7.3.1. Complete the preprtion tsks in the order they pper in the checklist. See Checklist for Upgrding vrelize Automtion. This chpter includes the following topics: Run NSX Network nd Security Inventory Dt Collection Before You Upgrde vrelize Automtion Bckup Prerequisites for Upgrding vrelize Automtion Bck Up Your Existing vrelize Automtion Environment Set the vrelize Automtion PostgreSQL Repliction Mode to Asynchronous Downloding vrelize Automtion Applince Updtes Run NSX Network nd Security Inventory Dt Collection Before You Upgrde vrelize Automtion Before you upgrde vrelize Automtion 7.1, 7.2 to 7.3.x, you must run NSX Network nd Security Inventory dt collection in your vrelize Automtion 7.1, 7.2 or 7.3 environment. This dt collection is necessry for the lod lncer reconfigure ction to work in vrelize Automtion 7.3 or 7.3.1 for 7.1 nd 7.2 deployments. Procedure u Run NSX Network nd Security Inventory dt collection in your source vrelize Automtion environment efore you migrte to vrelize Automtion 7.3. See Strt Endpoint Dt Collection Mnully in Mnging vrelize Automtion. Wht to do next Bckup Prerequisites for Upgrding vrelize Automtion. Bckup Prerequisites for Upgrding vrelize Automtion Complete the ckup prerequisites efore you egin your upgrde vrelize Automtion 7.1, 7.2 to 7.3 or 7.1, 7.2, 7.3 to 7.3.1. VMwre, Inc. 13
Prerequisites Verify tht your source environment is fully instlled nd configured. For ech pplince in the source environment, ck up ll the vrelize Automtion pplince configurtion files in the following directories. /etc/vcc/ /etc/vco/ /etc/pche2/ /etc/ritmq/ Bck up the IS Microsoft SQL Server dtse. For informtion, find rticles on the Microsoft Developer Network out creting full SQL Server dtse ckup. Bck up ny files you hve customized, such s DtCenterLoctions.xml. Crete snpshot of ech virtul pplince nd IS server. Adhere to regulr guidelines for cking up the entire system in cse vrelize Automtion upgrde is unsuccessful. See Bckup nd Recovery for vrelize Automtion Instlltions in Mnging vrelize Automtion. Wht to do next Bck Up Your Existing vrelize Automtion Environment. Bck Up Your Existing vrelize Automtion Environment Before you upgrde from vrelize Automtion 7.1, 7.2, to 7.3 or 7.1, 7.2, 7.3 to 7.3.1, shut down nd tke snpshot of ech vrelize Automtion IS server on ech Windows node nd ech vrelize Automtion pplince on ech Linux node. If the upgrde is unsuccessful, use the snpshot to return to the lst known good configurtion nd ttempt nother upgrde. For informtion out strting vrelize Automtion, see Strt Up vrelize Automtion in Mnging vrelize Automtion. Prerequisites Bckup Prerequisites for Upgrding vrelize Automtion. Beginning with vrelize Automtion 7.0, the PostgreSQL dtse is lwys configured in highvilility mode. Log in to vrelize Automtion Applince Mngement nd click vra settings > Dtse to locte the current Mster node. If the dtse configurtion is listed s n externl dtse, crete mnul ckup of this externl dtse. If the vrelize Automtion Microsoft SQL dtse is not hosted on the IS server, crete dtse ckup file. Verify tht you hve completed the ckup prerequisites for upgrding. Verify tht you hve tken snpshot of your system while it is shut down. This is the preferred method of tking snpshot. See your vsphere 6.0 Documenttion. VMwre, Inc. 14
If you cnnot shut down your system, tke n in-memory snpshot of ll the nodes. This is the nonpreferred method nd should only e used if you cnnot tke snpshot while the system is shut down. If you modified the pp.config file, mke ckup of tht file. See Restore Chnges to Logging in the pp.config File. Mke ckup of the externl workflow configurtion (xmld) files. See Restore Externl Workflow Timeout Files. Verify tht you hve loction outside your current folder where you cn store your ckup file. See Bckup Copies of.xml Files Cuse the System to Time Out. Procedure 1 Log in to your vsphere client. 2 Locte ech vrelize Automtion IS Windows mchine, nd ech vrelize Automtion pplince node. 3 On ech mchine, click Shutdown guest in this order. IS Windows Server mchines vrelize Automtion pplince. 4 Tke snpshot of ech vrelize Automtion mchine. 5 Use your preferred ckup method to crete full ckup of ech pplince node. 6 Power on the system. See Strt Up vrelize Automtion in Mnging vrelize Automtion. If you hve high vilility environment, complete these steps to power on your virtul pplinces. c d e Strt the mster vrelize Automtion pplince. Log in to vrelize Automtion Applince Mngement, click Services, nd wit until the licensing-service sttus is REGISTERED. Strt the remining vrelize Automtion pplinces t the sme time. Strt the primry We node nd wit for the strtup to finish. Strt the primry Mnger Service mchine nd wit for 2 to 5 minutes. The ctul time depends on your site configurtion. Note On secondry mchines, do not strt or run the Windows service unless you re configured for utomtic Mnger Service filover. f Strt the Distriuted Execution Mnger Orchestrtor nd Workers nd ll vrelize Automtion proxy gents. Note You cn strt these components in ny order. You do not need to wit for component to finish efore you strt nother. VMwre, Inc. 15
7 Log in to ech vrelize Automtion pplince mngement console nd verify tht the system is fully functionl. Click Services. Verify tht ech service is REGISTERED. Wht to do next Set the vrelize Automtion PostgreSQL Repliction Mode to Asynchronous. Set the vrelize Automtion PostgreSQL Repliction Mode to Asynchronous If you upgrde from distriuted vrelize Automtion environment tht opertes in PostgreSQL synchronous repliction mode, you must chnge it to synchronous efore you upgrde. Prerequisites You hve distriuted vrelize Automtion environment tht you wnt to upgrde. You re logged in s root to vrelize Automtion Applince Mngement t https://vr-vhostnme.domin.nme:5480. Procedure 1 Click vra Settings > Dtse. 2 Click Async Mode nd wit until the ction completes. 3 Verify tht ll nodes in the Sync Stte column disply Async sttus. Wht to do next Downloding vrelize Automtion Applince Updtes Downloding vrelize Automtion Applince Updtes You cn check for updtes on your pplince mngement console, nd downlod the updtes using one of the following methods. For est upgrde performnce, use the ISO file method. Downlod Virtul Applince Updtes for Use with CD-ROM Drive You cn updte your virtul pplince from n ISO file tht the pplince reds from the virtul CD-ROM drive. This is the preferred method. You downlod the ISO file nd set up the primry pplince to use this file to upgrde your pplince. Prerequisites Bck up your existing vrelize Automtion environment. VMwre, Inc. 16
Verify tht ll CD-ROM drives you use in your upgrde re enled efore you updte vrelize Automtion pplince. See the vsphere documenttion for informtion out dding CD- ROM drive to virtul mchine in the vsphere client. Procedure 1 To downlod the updte repository ISO file, go to the vrelize Automtion product pge t www.vmwre.com. Click vrelize Automtion Downlod Resources to go to the VMwre downlod pge. 2 Locte the downloded file on your system to verify tht the file size is the sme s the file on the VMwre downlod pge. Use the checksums provided on the downlod pge to vlidte the integrity of your downloded file. For more informtion, see the links t the ottom of the VMwre downlod pge. 3 Verify tht your primry virtul pplince is powered on. 4 Connect the CD-ROM drive for the primry virtul pplince to the ISO file you downloded. 5 Go to the mngement console for your virtul pplince y using its fully qulified domin nme, https://v-hostnme.domin.nme:5480. 6 Log in with the user nme root nd the pssword you entered when you deployed the pplince. 7 Click the Updte t. 8 Click Settings. 9 Under Updte Repository, select Use CDROM Updtes. 10 Click Sve Settings. Downlod vrelize Automtion Applince Updtes from VMwre Repository You cn downlod the updte for your vrelize Automtion pplince from pulic repository on the vmwre.com wesite. Prerequisites Bck up your existing vrelize Automtion environment. Verify tht your vrelize Automtion pplince is powered on. Procedure 1 Go to the mngement console for your virtul pplince y using its fully qulified domin nme, https://v-hostnme.domin.nme:5480. 2 Log in with the user nme root nd the pssword you entered when you deployed the pplince. 3 Click the Updte t. 4 Click Settings. 5 (Optionl) Set how often to check for updtes in the Automtic Updtes pnel. VMwre, Inc. 17
6 Select Use Defult Repository in the Updte Repository pnel. The defult repository is set to the correct VMwre.com URL. 7 Click Sve Settings. VMwre, Inc. 18
Updting the vrelize Automtion Applince nd IS Components 4 After you finish the upgrde prerequisites nd downlod the virtul pplince updte, you instll the updte on the vrelize Automtion 7.1, 7.2 pplince to upgrde to 7.3 or on the 7.1, 7.2, 7.3 pplince to upgrde to 7.3.1. You instll the updte on the vrelize Automtion pplince. For distriuted environment, you instll the updte on the mster pplince node. The time required for the updte to finish vries ccording to your environment nd network. When the updte finishes, the system displys the chnges mde on the Updte Sttus pge of vrelize Automtion Applince Mngement. When the pplince updte finishes, you must reoot the pplince. When you reoot the mster pplince in distriuted environment, the system reoots ech replic node. After you reoot, Witing for VA services to strt ppers on the Updte Sttus pge. The IS updte strts when the system is fully initilized nd ll services re running. You cn oserve the IS upgrde progress on the Updte Sttus pge. The first IS server component cn tke out 30 minutes to finish. During the upgrde, you see messge similr to Upgrding server components for node we1-vr.mycompny.com. At the end of the upgrde process for ech Mnger Service node, you see messge similr to Enling MngerService utomtic filover mode for node mgr-vr.mycompny.com. In vrelize Automtion 7.3, the ctive Mnger Service node chnges from mnul election to system decision out which node ecomes the filover server. The system enles this feture during upgrde. If you hve prolems with this feture, see Updte Fils to Upgrde the Mngement Agent. Instll the Updte on the vrelize Automtion Applince nd IS Components You cn instll the updte on the vrelize Automtion 7.1 or 7.2 virtul pplince to upgrde vrelize Automtion nd the IS components to 7.3. You cn instll the updte on the vrelize Automtion 7.1, 7.2, 7.3 virtul pplince to upgrde vrelize Automtion nd the IS components to 7.3.1. Do not close the mngement console while you instll the updte. VMwre, Inc. 19
If you encounter ny prolems during the upgrde process, see Chpter 9 Trouleshooting the vrelize Automtion Upgrde. Note While upgrding the Mngement Agent on the IS virtul mchines, VMwre pulic certificte is temporrily instlled in your Trusted Pulishers certificte store. The Mngement Agent upgrde process uses PowerShell script tht is signed with this certificte. When the upgrde is finished, this certificte is removed from your certificte store. Prerequisites Verify tht you selected downlod method nd downloded the updte. See Downloding vrelize Automtion Applince Updtes. For ll high-vilility environments, see Bck Up Your Existing vrelize Automtion Environment. For environments with lod lncers, verify tht you disled ll the redundnt nodes nd removed the helth monitors. For informtion, see your lod lncer documenttion. vrelize Automtion pplince IS Wesite IS Mnger Service For environments with lod lncers, verify tht the trffic is directed only to the primry node. Verify tht the IS service hosted in Microsoft Internet Informtion Services (IIS) is running y performing the following steps: Enter the URL https://wehostnme/repository/dt/metmodel.svc to verify tht the We Repository is running. If successful, no errors re returned nd you see list of models in XML formt. Log in to the IS Wesite nd check tht the sttus recorded in the Repository.log file reports OK. The file is locted in the VCAC home folder t /Server/Model Mnger We/Logs/Repository.log. Note For distriuted IS Wesite, log in to the secondry wesite, without MMD, nd stop Microsoft IIS temporrily. To ensure tht the lod lncer trffic is only going through the primry We node, check the MetModel.svc connectivity, nd restrt the Microsoft IIS. Verify tht ll IS nodes re in helthy stte y performing the following steps: c d Go to the mngement console for your primry virtul pplince y using its fully qulified domin nme, https://v-hostnme.domin.nme:5480. Log in with the user nme root nd the pssword you entered when the pplince ws deployed. Select vra settings > Cluster. Under Lst Connected, verify the following. The IS nodes in the tle hve lst connected time of less thn 30 seconds. VMwre, Inc. 20
The virtul pplince nodes hve lst connected time of less thn 10 minutes. If the IS nodes re not in communiction with the vrelize Automtion pplince, the upgrde fils. To dignose connectivity prolems etween the Mngement Agent nd virtul pplince, perform these steps. 1 Log in to ech IS node tht is not listed or hs Lst Connected time greter thn 30 seconds. 2 Check the Mngement Agent logs to see if ny errors re recorded. 3 If the Mngement Agent is not running, restrt the gent in the Services console. e Note ny orphned nodes listed in the tle. An orphned node is duplicte node tht is reported on the host ut does not exist on the host. You must delete ll orphned nodes. For more informtion, see Delete Orphned Nodes on vrelize Automtion. If you hve replic virtul pplince tht is no longer prt of the cluster, you must delete it from the cluster tle. If you do not delete this pplince, the upgrde process displys wrning messge tht the replic updte is unsuccessful. Verify tht ll sved nd in-progress requests hve finished successfully efore you upgrde. If you upgrde the IS components mnully fter you updte the vrelize Automtion 7.1 or 7.2 pplince, see Exclude Mngement Agents from Upgrde. If you pln to upgrde IS mnully, you must lso stop ll IS services, except Mngement Agent, on ech IS node. Procedure 1 Open the vrelize Automtion pplince mngement console. For distriuted environment, open the mngement console on the mster pplince. Go to the mngement console for your virtul pplince y using its fully qulified domin nme, https://v-hostnme.domin.nme:5480. Log in with the user nme root nd the pssword you entered when you deployed the pplince. 2 Click Services nd verify tht ll services re registered. 3 Select vra Settings > Dtse nd verify tht this pplince is the mster vrelize Automtion pplince. You instll the updte only on the mster vrelize Automtion pplince. Ech replic vrelize Automtion pplince is updted with the mster pplince. 4 Select Updte > Sttus. 5 Click Check Updtes to verify tht n updte is ccessile. 6 (Optionl) For instnces of vrelize Automtion pplince, click Detils in the Applince Version re to see informtion out the loction of relese notes. 7 Click Instll Updtes. VMwre, Inc. 21
8 Click OK. A messge stting tht the updte is in progress ppers. The system shows chnges mde during n upgrde on the Updte Summry pge. The time required for the updte to finish vries ccording to your environment nd network. 9 (Optionl) To monitor the updte in greter detil, use terminl emultor to log in to the primry pplince. View the updtecli.log file t /opt/vmwre/vr/log/vmi/updtecli.log. Additionl upgrde progress informtion cn lso e seen in these files. /opt/vmwre/vr/log/vmi/vmi.log /vr/log/vmwre/horizon/horizon.log /vr/log/ootstrp/*.log If you log out during the upgrde process, you cn continue to follow the updte progress in the log file. The updtecli.log file might disply informtion out the version of vrelize Automtion tht you re upgrding from. This displyed version chnges to the proper version lter in the upgrde process. 10 When the vrelize Automtion pplince updte finishes, click System > Reoot in the mngement console. In distriuted environment, ll successfully upgrded replic pplince nodes reoot when you reoot the mster pplince. The IS updte strts when the system is initilized nd ll services re up nd running. Click Updte > Sttus to oserve the IS upgrde progress. 11 When the IS updte finishes, click Cluster in the pplince mngement console nd verify tht the version numer is the current version for ll IS nodes nd components. 12 Click the Telemetry in the pplince mngement console. Red the note out prticiption in the Customer Experience Improvement Progrm (CEIP) nd select to join or not join the progrm. Detils regrding the dt collected through CEIP nd the purposes for which it is used y VMwre re set forth t the Trust & Assurnce Center t http://www.vmwre.com/trustvmwre/ceip.html. For more informtion out the Customer Experience Improvement Progrm, see Join or Leve the Customer Experience Improvement Progrm for vrelize Automtion in Mnging vrelize Automtion. Wht to do next If your deployment uses lod lncer, perform these steps. 1 Enle the lod lncer vrelize Automtion helth checks. 2 Re-enle lod lncer trffic for ll vrelize Automtion nodes. If the IS components fil to upgrde, see Chpter 5 Upgrding the IS Server Components Seprtely If the Updte Process Fils. VMwre, Inc. 22
Upgrding the IS Server Components Seprtely If the Updte Process Fils 5 If the utomtic updte process fils, you cn upgrde the IS components seprtely. If the vrelize Automtion IS We site nd Mnger Service successfully upgrded, you cn run the IS upgrde shell script gin without reverting to the snpshots you took efore the upgrde. Sometimes pending reoot event generted while upgrding multiple IS components instlled on the sme virtul mchine cn fil the upgrde. In this cse, try mnully reooting the IS node nd rerunning the upgrde to fix the prolem. If the upgrde fils consistently, contct VMwre support or ttempt mnul upgrde y following these steps. 1 Revert your vrelize Automtion pplince to its pre-updte stte. 2 Run commnd to exclude the IS components from the updte process. See Exclude Mngement Agents from Upgrde. 3 Run the updte process on the vrelize Automtion pplince. 4 Updte the IS components seprtely using the Upgrde Shell Script or the vrelize Automtion 7.3 IS instller msi pckge. This chpter includes the following topics: Upgrde IS Components Using the Upgrde Shell Script After Upgrding the vrelize Automtion Applince Upgrding IS Components Using the IS Instller Executle File After Upgrding the vrelize Automtion Applince Restore Access to the Built-In vrelize Orchestrtor Control Center Upgrde IS Components Using the Upgrde Shell Script After Upgrding the vrelize Automtion Applince Use the upgrde shell script to upgrde the IS Components fter you updte ech vrelize Automtion 7.1, 7.2 pplince to 7.3 or fter you updte ech vrelize Automtion 7.1, 7.2, 7.3 pplince to 7.3.1. The updted vrelize Automtion pplince contins shell script tht you use to upgrde ech IS node nd component. VMwre, Inc. 23
You cn run the upgrde script y using the vsphere console for the virtul mchine or y using n SSH console session. If you use the vsphere console, you void intermittent network connectivity prolems tht cn rek the execution of the script. If you stop the script while it is upgrding component, the script stops when it finishes upgrding the component. If other components on the node still must e upgrded, you cn run the script gin. When the upgrde finishes, you cn review the upgrde result y opening the upgrde log file t /opt/vmwre/vr/log/vmi/upgrde-is.log. Prerequisites Review Chpter 9 Trouleshooting the vrelize Automtion Upgrde. Verify the successful updte of ll vrelize Automtion pplinces. If you reoot n IS server fter you updte ll the vrelize Automtion pplinces ut efore you upgrde the IS components, stop ll the IS services on Windows, except for the Mngement Agent service. Before you run the upgrde shell script on the mster vrelize Automtion pplince node, click the Services on the pplince mngement console. Verify tht ech service, except for is-service, is REGISTERED. To instll the IS Mngement Agent mnully on ech IS node, finish these steps. c On the Open rowser nd nvigte to the VMwre vrelize Automtion IS Instlltion pge on the pplince t https://virtul_pplince_host_fqdn:5480/instller. Downlod the Mngement Agent instller, vcac-ismngementagent-setup.msi. Log in to ech vrelize Automtion IS mchine nd upgrde the Mngement Agent with the Mngement Agent instller. Restrt the Windows Mngement Agent service. Verify tht your primry IS Wesite nd Model Mnger node hs JAVA SE Runtime Environment 8, 64 its, updte 161 or lter instlled. After you instll Jv, you must set the environment vrile, JAVA_HOME, to the new version on ech server node. Log in to ech IS Wesite node nd verify tht the cretion dte is erlier thn the modified dte in the we.config file. If the cretion dte for the we.config file is the sme s or lter thn the modified dte, perform the procedure in Upgrde Fils for IS Wesite Component. To verify tht ech IS node hs n upgrded IS Mngement Agent, perform these steps on ech IS node: c d Log in to the vrelize Automtion pplince mngement console. Select vra Settings > Cluster. Expnd the list of ll instlled components on ech IS node, nd locte the IS Mngement Agent. Verify tht the Mngement Agent version is current. Exclude Mngement Agents from Upgrde. VMwre, Inc. 24
Verify tht the IS Microsoft SQL Server dtse ckup is ccessile in cse you must roll ck. Verify tht snpshots of the IS servers in your deployment re ville. If the upgrde is unsuccessful, return to the snpshot nd dtse ckup nd ttempt nother upgrde. Procedure 1 Open new console session on the vrelize Automtion pplince host. Log in with the root ccount. 2 Chnge directories to /usr/li/vcc/tools/upgrde/. It is importnt tht ll IS Mngement Agents re upgrded nd helthy efore running the./upgrde shell script. If ny IS Mngement Agent hs prolem when you run the upgrde shell script, see Updte Fils to Upgrde the Mngement Agent. 3 Run the upgrde script. At the commnd prompt, enter./upgrde. Press Enter. For description of the IS upgrde process, see Chpter 4 Updting the vrelize Automtion Applince nd IS Components. If the Upgrde Shell Script is unsuccessful, review the upgrde-is.log file. You cn run the upgrde script gin fter you fix prolem. Wht to do next 1 Restore Access to the Built-In vrelize Orchestrtor Control Center. 2 If your deployment uses lod lncer, re-enle the vrelize Automtion helth monitors nd the trffic to ll nodes. For more informtion, see vrelize Automtion Lod Blncing. Upgrding IS Components Using the IS Instller Executle File After Upgrding the vrelize Automtion Applince You cn use this lterntive method to upgrde IS components fter you upgrde the vrelize Automtion 7.1, 7.2 pplince to 7.3 or the 7.1, 7.2, 7.3 pplince to 7.3.1. Downlod the IS Instller to Upgrde IS Components After Upgrding the vrelize Automtion Applince After you upgrde the vrelize Automtion pplince to 7.3 or 7.3.1, downlod the IS instller to the mchine where the IS components to e upgrded re instlled. VMwre, Inc. 25
If you see certificte wrnings during this procedure, you cn ignore them. Note Except for pssive ckup instnce of the Mnger Service, the strtup type for ll services must e set to Automtic during the upgrde process. The upgrde process fils if you set services to Mnul. Prerequisites Verify tht Microsoft.NET Frmework 4.5.2 or lter is instlled on the IS instlltion mchine. You cn downlod the.net instller from the vrelize Automtion instller We pge. If you updte.net to 4.5.2 fter you shut down the services nd the mchine restrted s prt of the instlltion, you must mnully stop ll IS services except the Mngement gent. If you re using Internet Explorer for the downlod, verify tht Enhnced Security Configurtion is not enled. Enter res://iesetup.dll/softadmin.htm in the serch r nd press Enter. Log in s locl dministrtor to the Windows server where one or more of the IS components you wnt to upgrde re instlled. Procedure 1 Open We rowser. 2 Enter the URL for the Windows instller downlod pge. For exmple, https://vcc-v-hostnme.domin.nme:5480/instller, where vcc-vhostnme.domin.nme is the nme of the primry (mster) vrelize Automtion pplince node. 3 Click the IS instller link. 4 When prompted, sve the instller file, setup vcc-v-hostnme.domin.nme@5480.exe, to the desktop. Do not chnge the file nme. It is used to connect the instlltion to the vrelize Automtion pplince. Wht to do next Upgrde the IS Components After Upgrding the vrelize Automtion Applince. Upgrde the IS Components After Upgrding the vrelize Automtion Applince After you upgrde the vrelize Automtion Applince to 7.3 or 7.3.1, you must upgrde the PostgreSQL dtse nd configure ll systems tht hve IS components instlled. You cn use this procedure for miniml nd distriuted instlltions. Note The IS instller must e on the mchine tht contins the IS components you wnt to upgrde. You cnnot run the instller from n externl loction, except for the Microsoft SQL dtse which lso cn e upgrded remotely from the We node. Verify tht snpshots of the IS servers in your deployment re ville. If the upgrde fils, you cn return to the snpshot nd ttempt nother upgrde. VMwre, Inc. 26
Perform the upgrde so tht services re upgrded in the following order: 1 IS We sites If you re using lod lncer, disle trffic to ll non-primry nodes. Finish the upgrde on one server efore upgrding the next server tht is running Wesite service. Strt with the one tht hs the Model Mnger Dt component instlled. If you re performing mnul externl Microsoft SQL dtse upgrde, you must upgrde the externl SQL efore you upgrde the We node. You cn upgrde the externl SQL remotely from the We node. 2 Mnger Services Upgrde the ctive Mnger Service efore you upgrde the pssive Mnger Service. If you do not hve SSL encryption enled in your SQL instnce, uncheck the SSL encryption checkox in the Is Upgrde configurtion dilog ox next to the SQL definition. 3 DEM orchestrtor nd workers Upgrde ll DEM orchestrtors nd workers. Finish the upgrde on one server efore you upgrde the next server. 4 Agents Finish the upgrde on one server efore you upgrde the next server tht is running n gent. 5 Mngement Agent Is updted utomticlly s prt of the upgrde process. If you re using different services on one server, the upgrde updtes the services in the proper order. For exmple, if your site hs We site nd mnger services on the sme server, select oth for updte. The upgrde instller pplies the updtes in the proper order. You must complete the upgrde on one server efore you egin n upgrde on nother. Note If your deployment uses lod lncer, the primry pplince must e connected to the lod lncer. All other instnces of vrelize Automtion pplince pplinces must e disled for lod lncer trffic efore you pply the upgrde to void cching errors. Prerequisites Bck up your existing vrelize Automtion environment. If you reoot n IS server fter you updte ll the vrelize Automtion pplinces ut efore you upgrde the IS components, stop ll of the IS windows services, except for the Mngement Agent service, on the server. Downlod the IS Instller to Upgrde IS Components After Upgrding the vrelize Automtion Applince. VMwre, Inc. 27
Verify tht your primry IS Wesite, Microsoft SQL dtse, nd Model Mnger node hs JAVA SE Runtime Environment 8, 64its, updte 161 or lter instlled. After you instll Jv, you must set the environment vrile, JAVA_HOME, to the new version on ech server node. Verify tht the cretion dte is erlier thn the modified dte in the we.config file. If the cretion dte for the we.config file is the sme s or lter thn the modified dte, perform the procedure in Upgrde Fils for IS Wesite Component. Complete these steps to reconfigure the Microsoft Distriuted Trnsction Coordintor (DTC). Note Even with Distriuted Trnsction Coordintor enled, the distriuted trnsction might fil if the firewll is turned on. c On the vrelize Automtion pplince, select Strt > Administrtive Tools > Component Services. Expnd Component Services > Computers > My Computer > Distriuted Trnsction Coordintor. Choose the pproprite tsk. For locl stndlone DTC, right-click Locl DTC nd select Properties For clustered DTC expnd Clustered DTCs nd right-click the nmed clustered DTC nd select Properties. d e Click Security. Select ll of the following. Network DTC Access Allow Remote Clients Allow Inound Allow Outound Mutul Authentiction Required f Click OK. Procedure 1 If you re using lod lncer, prepre your environment. Verify the IS Wesite node tht contins the Model Mnger dt is enled for lod lncer trffic. You cn identify this node y the presence of the vcac Folder\Server\ConfigTool folder. Disle ll other IS Wesites nd non-primry Mnger Services for lod lncer trffic. 2 Right-click the setup vrelize-utomtion-pplince-fqdn@5480.exe setup file nd select Run s dministrtor. 3 Click Next. VMwre, Inc. 28
4 Accept the license greement nd click Next. 5 Type the dministrtor credentils for your current deployment on the Log In pge. The user nme is root nd the pssword is the pssword tht you specified when you deployed the pplince. 6 Select Accept Certificte. 7 On the Instlltion Type pge, verify tht Upgrde is selected. If Upgrde is not selected, the components on this system re lredy upgrded to this version. 8 Click Next. 9 Configure the upgrde settings. Option If you re upgrding the Model Mnger Dt If you re not upgrding the Model Mnger Dt To preserve customized workflows s the ltest version in your Model Mnger Dt If you re upgrding Distriuted Execution Mnger or proxy gent To specify your Microsoft SQL Server dtse Action Select the Model Mnger Dt check ox in the vcac Server section. The check ox is selected y defult. Upgrde the Model Mnger dt only once. If you re running the setup file on multiple mchines to upgrde distriuted instlltion, the We servers stop functioning while there is version mismtch etween the We servers nd the Model Mnger dt. When you hve upgrded the Model Mnger dt nd ll of the We servers, ll of the We servers should function. Unselect the Model Mnger Dt check ox in the vcac Server section. If you re upgrding the Model Mnger Dt, select the Preserve my ltest workflow versions check ox in the Extensiility Workflows section. The check ox is selected y defult. Customized workflows re lwys preserved. The checkox determines version order only. If you used vrelize Automtion Designer to customize workflows in the Model Mnger, select this option to mintin the most recent version of ech customized workflow efore upgrde s the most recent version fter upgrde. If you do not select this option, the version of ech workflow provided with vrelize Automtion Designer ecomes the most recent fter upgrde, nd the most recent version efore upgrde ecomes the second most recent. For informtion out vrelize Automtion Designer, see Life Cycle Extensiility. Enter the credentils for the dministrtor ccount in the Service Account section. All of the services tht you upgrde run under this ccount. If you re upgrding the Model Mnger Dt, enter the nmes of the dtse server nd dtse instnce in the Server text ox in the Microsoft SQL Server Dtse Instlltion Informtion section. Enter fully qulified domin nme (FQDN) for the dtse server nme in the Dtse nme text ox. If the dtse instnce is on non-defult SQL port, include the port numer in the server instnce specifiction. The Microsoft SQL defult port numer is 1433. When upgrding the mnger nodes, the MSSQL SSL option is selected y defult. If your dtse does not use SSL, uncheck Use SSL for dtse connection. 10 Click Next. VMwre, Inc. 29
11 Confirm tht ll services to upgrde pper on the Redy to Upgrde pge, nd click Upgrde. The Upgrding pge nd progress indictor pper. When the upgrde process finishes, the Next utton is enled. 12 Click Next. 13 Click Finish. 14 Verify tht ll services restrted. 15 Repet these steps for ech IS server in your deployment in the recommended order. 16 After ll components re upgrded, log in to the mngement console for the pplince nd verify tht ll services, including IS, re now registered. 17 (Optionl) Enle Automtic Mnger Service Filover. See Enle Automtic Mnger Service Filover in Instlling vrelize Automtion 7.3. All of the selected components re upgrded to the new relese. Wht to do next 1 Restore Access to the Built-In vrelize Orchestrtor Control Center. 2 If your deployment uses lod lncer, re-enle the vrelize Automtion helth monitors nd the trffic to ll nodes. For more informtion, see vrelize Automtion Lod Blncing. Restore Access to the Built-In vrelize Orchestrtor Control Center After you upgrde the IS server components, you must restore ccess to the vrelize Orchestrtor. When you upgrde to vrelize Automtion 7.3, you need to perform this procedure to ccommodte the new Role-Bsed Access Control feture. This procedure is written for high-vilility environment. Prerequisites Mke snpshot of your vrelize Automtion environment. Procedure 1 Log in to the vrelize Automtion pplince mngement console s root y using the pplince host fully qulified domin nme, https://v-hostnme.domin.nme:5480. 2 Select vra Settings > Dtse. 3 Identify the mster nd replic nodes. 4 On ech replic node, open n SSH session, log in s dministrtor, nd run this commnd: service vco-server stop && service vco-configurtor stop VMwre, Inc. 30
5 On the mster node, open n SSH session, log in s dministrtor, nd run this commnd: rm /etc/vco/pp-server/vco-registrtion-id 6 On the mster node, chnge directories to /etc/vco/pp-server/. 7 Open the sso.properties file. 8 If the property nme com.vmwre.o11n.sso.dmin.group.nme contins spces or ny other Bsh-relted chrcters tht cn e ccepted s specil chrcter in Bsh commnd such s hyphen (') or dollr sign ($), complete these steps. c Copy the line with the com.vmwre.o11n.sso.dmin.group.nme property nd enter AdminGroup for the vlue. Add # to the eginning of the originl line with the com.vmwre.o11n.sso.dmin.group.nme property to comment the line. Sve nd close the sso.properties file. 9 Run this commnd: vcc-vmi vco-service-reconfigure 10 Open the sso.properties file. If the file hs chnged, complete these steps. c Remove the # from the eginning of the originl line with the com.vmwre.o11n.sso.dmin.group.nme property to uncomment the line. Remove the copy of the line with the com.vmwre.o11n.sso.dmin.group.nme property. Sve nd close the sso.properties file. 11 Run this commnd to restrt the vco-server service: service vco-server restrt 12 Run this commnd to restrt the vco-configurtor service: service vco-configurtor restrt 13 In the vrelize Automtion pplince mngement console, click Services nd wit until ll the services in the mster node re REGISTERED. 14 When ll the services re registered, join the vrelize Automtion replic nodes to the vrelize Automtion cluster to synchronize the vrelize Orchestrtor configurtion. For informtion, see Reconfigure the Built-In vrelize Orchestrtor to Support High Avilility. Wht to do next Chpter 6 Upgrding vrelize Orchestrtor After Upgrding vrelize Automtion. VMwre, Inc. 31