HOLDDATA FOR IMS 7.1 PUT Level ** Please read all of the HOLDDATA before acting on any of it. **

Transcription

1 HOLDDATA FOR IMS 7.1 PUT Level 0401 Please read all of the HOLDDATA before acting on any of it. Please pay close attention to the holddata for the following PTFs with action items. UQ83056 IOGEN UQ83419 UQ84259 IOGEN UQ84260 IOGEN HOLDDATA UQ80879 TYPE = PTF DATE/TIME REC = :27:12 SOURCEID = PUT0310 PRE VER(001) = UQ42463 UQ58286 UQ61540 UQ64717 UQ65202 UQ65876 UQ66388 UQ68665 UQ73141 SUPING VER(001) = DQ62090 DQ76609 UQ67884 MACUPD = MSGJCL PARMBLK MOD = DFSJVM00 DFSPCJB0 DFSPCJM0 DFSPRPX0 DFSRCJM0 DFSRRA40 SRCUPD = DFSPRPX0 DFSRRA40 HOLDERROR = DQ HOLD(UQ80879) FMID(HMK7700) REASON(DQ80624) ERROR DATE(04015) (SMRTDATA(FIX(UQ83056) CHGDT(040115))) CLASS(PE). HOLDSYSTEM(INT) = DEP ++ HOLD(UQ80879) SYS FMID(HMK7700) REASON(DEP) DATE(03279) (++ + HOLD FOR APAR PQ Java Dependent User requirements + + This service requires SDK SR17 (PTF UQ73928) + + If SDK is being used this service is required and + + XPLINK=Y must be specified. Please see the cover letter for + + additional details. + ++). HOLDSYSTEM(INT) = DOC ++ HOLD(UQ80879) SYS FMID(HMK7700) REASON(DOC) DATE(03279) (DOCUMENTATION CHANGE FOR APAR PQ76609 GC Installation Volume 2: System Definition and Tailoring Document Number GC Add the following to the "Parameter Descriptions" section: XPLINK= N Y Specifies whether (Y) or not (N) to initialize the JVM LE enclave with XPLINK(ON). You must specify XPLINK=Y if you are running SDK or above. XPLINK=N is the default. Also, add XPLINK= to the DFSJMP and DFSJBP Parameters sections. IMS Java Users Guide Document number SC Add the following to Section and You must specify XPLINK=Y if you are running SDK or above.).

2 UQ83056 TYPE = PTF DATE/TIME REC = :38:43 PRE VER(001) = UQ42463 UQ58286 UQ61540 UQ64717 UQ65876 UQ66388 UQ80879 SUPING VER(001) = DQ80624 MACUPD = MSGJCL PARMBLK MOD = DFSRRA40 SRCUPD = DFSRRA40 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ83056) SYS FMID(HMK7700) REASON(DOC) DATE(03345) (DOCUMENTATION CHANGE FOR APAR PQ80624 GC Documentation Change for Installation Volume 2 GC The following is the current procedure that is created by sysgen for the DFSJBP procedure. // PROC MBR=TEMPNAME,PSB=,JVMOPMAS=,OUT=, // OPT=N,SPIE=0,TEST=0,DIRCA=000, // STIMER=,CKPTID=,PARDLI=, // CPUTIME=,NBA=,OBA=,IMSID=,AGN=, // PREINIT=,RGN=56K,SOUT=A, // SYS2=,ALTID=,APARM=,ENVIRON=,LOCKMAX=, // XPLINK=N //JBPRGN EXEC PGM=DFSRRC00,REGION=&&RGN, // PARM=(JBP,&&MBR,&&PSB,&&JVMOPMAS,&&OUT // &&OPT&&SPIE&&TEST&&DIRCA, // &&STIMER,&&CKPTID,&&PARDLI,&&CPUTIME, // &&NBA,&&OBA,&&IMSID,&&AGN, // &&PREINIT,&&ALTID, // ''&&APARM'',&&ENVIRON,&&LOCKMAX, // &&XPLINK) //STEPLIB DD DSN=IMSBLD.&&SYS2.SDFSJLIB,DISP=SHR // DD DSN=IMSBLD.&&SYS2.SDFSRESL,DISP=SHR // DD DSN=IMSBLD.&&SYS2.PGMLIB,DISP=SHR // DD DSN=CEE.SCEERUN,DISP=SHR // DD DSN=SYS1.CSSLIB,DISP=SHR //PROCLIB DD DSN=IMSBLD.&&SYS2.PROCLIB,DISP=SHR //SYSUDUMP DD SYSOUT=&&SOUT, // DCB=(LRECL=121,RECFM=VBA,BLKSIZE=3 29), // SPACE=(125,(2500,100),RLSE,,ROUND) The following is the current procedure that is created by sysgen for the DFSJMP procedure. // PROC SOUT=A,RGN=56K,SYS2=, // CL1=001,CL2=000,CL3=000,CL4=000, // OPT=N,OVLA=0,SPIE=0,VALCK=0,TLIM=00, // PCB=000,STIMER=,SOD=, // NBA=,OBA=,IMSID=,AGN=, // PREINIT=,ALTID=,PWFI=N,APARM=, // LOCKMAX=,ENVIRON=,JVMOPWKR=, // JVMOPMAS=,XPLINK=N //JMPRGN EXEC PGM=DFSRRC00,REGION=&&RGN, // TIME=1440,DPRTY=(12,0), // PARM=(JMP,&&CL1&&CL2&&CL3&&CL4, // &&OPT&&OVLA&&SPIE&&VALCK&&TLIM&&PCB, // &&STIMER,&&SOD,&&NBA,

3 // &&OBA,&&IMSID,&&AGN,&&PREINIT, // &&ALTID,&&PWFI,''&&APARM'',&&LOCKMAX, // &&ENVIRON,&&JVMOPWKR,&&JVMOPMAS, // &&XPLINK) //STEPLIB DD DSN=IMSBLD.&&SYS2.PGMLIB,DISP=SHR // DD DSN=IMSBLD.&&SYS2.SDFSJLIB,DISP=SHR // DD DSN=IMSBLD.&&SYS2.SDFSRESL,DISP=SHR // DD DSN=CEE.SCEERUN,DISP=SHR // DD DSN=SYS1.CSSLIB,DISP=SHR //PROCLIB DD DSN=IMSBLD.&&SYS2.PROCLIB,DISP=SHR //SYSUDUMP DD SYSOUT=&&SOUT, // DCB=(LRECL=121,BLKSIZE=3129,RECFM=VBA), // SPACE=(125,(2500,100),RLSE,,ROUND)). HOLDSYSTEM(INT) = IOGEN ++ HOLD(UQ83056) SYS FMID(HMK7700) REASON(IOGEN) DATE(03345) (XPLINK parameter is moved to the last positional parameter in the DFSJBP and DFSJMP procedures. The DFSJBP and DFSJMP procedure changes in this service, PQ80624 superceed changes required for PQ AFTER THIS MAINTENANCE IS ACCEPTED AN IMS "CTLBLKS" SYSGEN IS REQUIRED IF rebuilding proclib members to pick up changes for the MSGJCL macro for Java Dependent Region JMPs or JBPs. Optionally, these procedures may be updated manually. Macro(s) in this service are used in the SYSGEN process. For this service to correct the SYSGEN it must be in ACCEPT status and the failing sysgen rerun. Optionally, the procedure can be manually updated to eliminate the need for an immediate sysgen if the function provided by this service is required. PLEASE NOTE: If your last SYSGEN was successful and this problem wasn't exposed then ACCEPT this service at your convenience and it will be picked up the next time a SYSGEN is done. The DFSJBP and DFSJMP procs have been changed. IMS generates members of IMS.PROCLIB if PROCLIB=YES is specified specified (or defaulted to) on the IMSGEN macro and you are generating a CTLBLKS, NUCLEUS, ONLINE, or ALL type of generation.). UQ83079 TYPE = PTF DATE/TIME REC = :38:43 PRE VER(001) = UQ35924 UQ35950 UQ36072 UQ39375 UQ40581 UQ49980 UQ51346 UQ53024 UQ53832 UQ53833 UQ55061 UQ59780 UQ60754 UQ60933 UQ61540 UQ62852 UQ64692 UQ64717 UQ65876 UQ68188 UQ69365 UQ70903 UQ72544 UQ72575 UQ72796 UQ78562 UQ78980 UQ81410 SUPING VER(001) = DQ75249 MACUPD = ISCD MOD = DFSIRST0 DFSRRSI0 SRCUPD = DFSIRST0 HOLDSYSTEM(INT) = AO ++ HOLD(UQ83079) SYS FMID(HMK7700) REASON(AO) DATE(03346) ( + HOLD FOR APAR PQ THIS APAR CHANGES OR AFFECTS AN IMS MESSAGE. IMS MESSAGE NUMBER: See below Delete the following message: DFS3835W UNABLE TO SET SYNCPOINT EXITS WITH RRS

4 PREVIOUS ACTIVE HAS NOT TERMINATED Add the following 2 new versions of the DFS698W message: DFS0698W PROTECTED CONVERSATION PROCESSING NOT ENABLED PREVIOUS ACTIVE IMS HAS NOT TERMINATED DFS0698W PROTECTED CONVERSATION PROCESSING NOT ENABLED PREVIOUS RRS SYSTEM HAS NOT TERMINATED ANY USER EXITS OR NONIBM VENDOR SOFTWARE WHICH ARE SENSITIVE TO THIS MESSAGE MAY NEED TO BE CHANGED. SEE THE APAR CLOSING TEXT OR PTF COVER LETTER FOR COMPLETE DETAILS ). HOLDSYSTEM(INT) = DOC ++ HOLD(UQ83079) SYS FMID(HMK7700) REASON(DOC) DATE(03346) (DOCUMENTATION CHANGE FOR APAR PQ75249 GC Required publications changes: IMS V7 Messages and Codes manual GC271120: Add the following new message: DFS1926W UNABLE TO DO RESTART WITH NEW RRS OLD RRS SYSTEM HAS NOT TERMINATED Explanation: IMS received a ATR_RESTART_WRONG_SYSTEM return code from the ATRIBRS (begin restart) call, indicating that IMS is restarting on the wrong system. This is the case in which an IMS is being started on another system or the XRF alternate is attempting to takeover. RRS requires that resource managers restart on the same system as before if there is work to be resolved, unless the RRS on the previous system is inactive. System Action: IMS continues processing without RRS, but will repeatedly attempt to do the restart with RRS. Operator Response: Ensure the previous active terminated, even if manual action is required. Module: DFSRRSI0). UQ83419 TYPE = PTF DATE/TIME REC = :38:45 PRE VER(001) = UQ35965 UQ36130 UQ40353 UQ40372 UQ40870 UQ41447 UQ41492 UQ42419 UQ45669 UQ46109 UQ48234 UQ48677 UQ48825 UQ51350 UQ51488 UQ51594 UQ52962 UQ54103 UQ54329 UQ54765 UQ55211 UQ55901 UQ56382 UQ58438 UQ61540 UQ61904 UQ62394 UQ62396 UQ64396 UQ65195 UQ65947 UQ67567 UQ67605 UQ68249 UQ69643 UQ69757 UQ69829 UQ70782 UQ71769 UQ73951 UQ73959 UQ75152 UQ75205 UQ77867 UQ79934 UQ81390 UQ81683 SUPING VER(001) = AQ74846 DQ31531 DQ37007 DQ71002 DQ74846 UQ35852 UQ42691 UQ75937 MACUPD = DBFLGSYN DBFUHIO DBFUTIO DBFUTPA

5 MOD = DBFATRM0 DBFCSTS0 DBFINI20 DBFINTP0 DBFSLG20 DBFUHDR0 DBFUHSR0 DBFUMMS0 DBFUMPA0 DBFUMRT0 DBFUMWT0 SRCUPD = DBFATRM0 DBFCSTS0 DBFINI20 DBFINTP0 DBFSLG20 DBFUHDR0 DBFUHSR0 DBFUMMS0 DBFUMPA0 DBFUMRT0 DBFUMWT0 HOLDSYSTEM(INT) = ACTION ++ HOLD(UQ83419) SYS FMID(HMK7700) REASON(ACTION) DATE(03353) ( APAR PQ74846 changes the size of an IMS control block. Control Block name: IOAR Macro changed: DBFUTIO, DBFUHIO Old size: x'178' New size: x'20b0' IMS Fastpath utility's PSB workarea increases by 7992 bytes. Any user modifications or nonibm vendor software which references this block must be changed and/or reassembled to include the new size. ). HOLDSYSTEM(INT) = AO ++ HOLD(UQ83419) SYS FMID(HMK7700) REASON(AO) DATE(03353) ( + Hold for APAR PQ This APAR changes or affects IMS messages. IMS Message number: DFS2634I, DFS2635I and DFS2636I Any user exits or nonibm vendor software which are sensitive to this message may need to be changed. See the APAR closing text or PTF cover letter for complete details ). HOLDSYSTEM(INT) = DOC ++ HOLD(UQ83419) SYS FMID(HMK7700) REASON(DOC) DATE(03353) (DOCUMENTATION CHANGE FOR APAR PQ74846 GC (IMS V7 Messages and Codes Volume 2) SC (IMS V7 Utilities Reference: DB & TM) SC (IMS V7 Summary of Operator Commands) GC (IMS V7 Messages and Codes Volume 2): Add area name to DFS2634I, DFS2635I and DFS2636I. i.e. DFS2634I AREA=BANKC00 HWM CI OWNED SDEP HARDENED LOCALLY DFS2635I AREA=BANKC01 HWM CI HARDENED REMOTELY DFS2636I AREA=BANKC00 PARTNER QCI FREE LOCKS SC (IMS V7 Utilities Reference: DB & TM): Add STOPAFTERFAIL# to the Appendix A. Summary of DEDB Utility Commands at Table 36. Summary of DEDB Utility Commands COMMAND OPERATOR SCAN DELETE REORG CREATE COMPARE UTILITY UTILITY UTILITY UTILITY UTILITY STOPAFTERFAIL# N/A N/A O N/A N/A Command Descriptions STOPAFTERFAIL# Specifies the number of UOWs that failed to be reorganized due to a lack of available buffers before the utility will be

6 abnormally terminated. The maximum value is 999. If STOPAFTERFAIL# is not specified, the default value of 5 is taken. If STOPAFTERFAIL# is specified as '0' then no limit should be imposed and the utility should continue to attempt to reorg the next UOW until it has reached the end of the DEDB area. Up to 999 failed UOWs will be listed. SC (IMS V7 Summary of Operator Commands): /DIS AREA. The following line is part of the /DIS AREA output, but has remained undocumented. The following will be added to the /DIS AREA doc, at the end of the keyword output description (just above the /display assignment discussion): The following line will be displayed only if an IMS/FP utility is active at the time the /DIS AREA command is entered. UTILITY: XXXX PVTTOT# YY PVTAVL# ZZ IMSID: SSSS SSSS UTILITY: XXXX XXXX is the active utility name. HSSP the HSSP utility HSRE DBFUHDR0, the High Speed Reorg utility MDL0 DBFUMDL0, the SDEP Delete utility MSC0 DBFUMSC0, the SDEP Scan utility MRI0 DBFUMRI0, the DEDB Create utility MMH0 DBFUMMH0, the DEDB compare utility PRLD VSO preload is active VXPL Shared VSO preload is active TOOL An IBM DBTOOL online utility is active The following two values are only displayed if the specific utility is using private buffers. PVTTOT# The total number of total buffers available to the utility PVTAVL# The number of unused private butters available to the utility. IMSID: SSSS SSSS is the IMSID of the IMS system the utility is currently active on. Example 3 for /DIS AREA Command Entry ET: /DIS AREA DB21AR0 Response ET: DFS000I AREANAME EQECT TOTAL UNUSED TOTAL UNUSED DBNAME EEQEC CONDITIONS SYS3 DFS000I DDNAME REMAIN SEQ DEPENDENT DIR ADDRESSABLE SYS DFS000I DB21AR0 N/A UW DEDBJN2 DFS000I UTILITY: HSSP PVTTOT# 45 PVTAVL# 30 IMSID: SYS3 SYS DFS000I DB21AR01 10 N/A N/A N/A N/A N/A DFS000I DB21AR02 10 N/A N/A N/A N/A N/A DFS000I DB21AR03 10 N/A N/A N/A N/A N/A). UQ83532 TYPE = PTF DATE/TIME REC = :38:46 PRE VER(001) = UQ36072 UQ36393 SUPING VER(001) = DQ34640 DQ35227 DQ38952 DQ40721 DQ43370 DQ50724 DQ50725 DQ56950 DQ58695 DQ59273 DQ66861 DQ70798 DQ77966 UQ39601 UQ41844 UQ46480 UQ46749 UQ49104 UQ57290 UQ57664 UQ62970 UQ64809 UQ65125 UQ74682 UQ76437 MOD = DFSILTA0 SRCUPD = DFSILTA0

7 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ39601) SYS FMID(HMK7700) REASON(DOC) DATE(03365) (DOCUMENTATION CHANGE FOR APAR PQ34640 ZES THE IMS/ESA V7 SYSTEM UTILITIES REFERENCE, ZES , WILL BE UPDATED TO EMPHASIZE THE PROPER USE OF THE ST PARAMETER. C PARAMETER:(WITHOUT DOC CHANGE) SPECIFIES THE NUMBER OF CHECKPOINTS TO BE PROCESSED BEFORE SELECTION OF TRANSACTIONS STOPS. C IS A NUMBER FROM 0 TO 9. C PARAMETER:(WITH DOC CHANGE) SPECIFIES THE NUMBER OF CHECKPOINTS TO BE PROCESSED BEFORE SELECTION OF TRANSACTIONS STOPS. C IS A NUMBER FROM 1 TO 9.). UQ83624 TYPE = PTF DATE/TIME REC = :38:48 PRE VER(001) = UQ72455 SUPING VER(001) = DQ79407 MACUPD = DFSMDA HOLDSYSTEM(INT) = DOC ++ HOLD(UQ83624) SYS FMID(HMK7700) REASON(DOC) DATE(03358) (DOCUMENTATION CHANGE FOR APAR PQ79407 SC In the Utilities Reference: System manual in Chapter 4. Dynamic Allocation Macro (DFSMDA) under the Macro Statements section for TYPE=DFSDCMON statement, add the following parameter description: DISP= Specifies the disposition for the Monitor data set for a UNIT=DASD data set definition. Valid values are OLD and SHR with OLD being the default if this parameter is not supplied. A warning message is issued if any other value is supplied, and a DISP=OLD value will override the value specified.). UQ83728 TYPE = PTF DATE/TIME REC = :38:49 PRE VER(001) = UQ42687 SUPING VER(001) = DQ46110 DQ48236 DQ48477 DQ51140 DQ55903 DQ56529 DQ66892 DQ72367 UQ52625 UQ55162 UQ55163 UQ59902 UQ62698 UQ62700 UQ75038 MOD = DFSPREC0 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ55162) SYS FMID(HMK7700) REASON(DOC) DATE(04008)

8 (DOCUMENTATION CHANGE FOR APAR PQ48236 GC DFS1982I Reason Code = A0 Index/ILE rebuild request not honored database specified NOT a HIDAM database. DFS1982I Reason Code = B0 Index/ILE rebuild request not honored DDIR not for a partitioned database. DFS1982I Reason Code = C0 Index/ILE rebuild request not honored PSB does NOT match the master DBD specified). HOLDSYSTEM(INT) = DOC ++ HOLD(UQ75038) SYS FMID(HMK7700) REASON(DOC) DATE(04008) (DOCUMENTATION CHANGE FOR APAR PQ66892 GC (Please note System Action for reason code 60 is different from all other reason codes.) For DFS1982I reason code 05, System Action should read: For DFS1982I reason code 10, System Action should read: For DFS1982I reason code 20, System Action should read: For DFS1982I reason code 30, System Action should read: For DFS1982I reason code 40, System Action should read: For DFS1982I reason code 50, System Action should read: For DFS1982I reason code 60, System Action should read: The job completed with a return code of 4 For DFS1982I reason code 70, System Action should read: For DFS1982I reason code 80, System Action should read: For DFS1982I reason code 90, System Action should read: For DFS1982I reason code A0, the message text should read: "Index/ILD rebuild request not honored database specified NOT a HIDAM database". The System Action should read: "The job terminated with a return code of 8." For DFS1982I reason code B0, System Action should read: For DFS1982I reason code C0, System Action should read:

9 For DFS1982I reason code D0, System Action should read: ). UQ83744 TYPE = PTF DATE/TIME REC = :38:49 PRE VER(001) = UQ36072 UQ36393 SUPING VER(001) = DQ34640 DQ35227 DQ38952 DQ40721 DQ43370 DQ50724 DQ50725 DQ56950 DQ58695 DQ59273 DQ66861 DQ70798 DQ77966 DQ82315 UQ39601 UQ41844 UQ46480 UQ46749 UQ49104 UQ57290 UQ57664 UQ62970 UQ64809 UQ65125 UQ74682 UQ76437 UQ83532 MOD = DFSILTA0 SRCUPD = DFSILTA0 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ39601) SYS FMID(HMK7700) REASON(DOC) DATE(03365) (DOCUMENTATION CHANGE FOR APAR PQ34640 ZES THE IMS/ESA V7 SYSTEM UTILITIES REFERENCE, ZES , WILL BE UPDATED TO EMPHASIZE THE PROPER USE OF THE ST PARAMETER. C PARAMETER:(WITHOUT DOC CHANGE) SPECIFIES THE NUMBER OF CHECKPOINTS TO BE PROCESSED BEFORE SELECTION OF TRANSACTIONS STOPS. C IS A NUMBER FROM 0 TO 9. C PARAMETER:(WITH DOC CHANGE) SPECIFIES THE NUMBER OF CHECKPOINTS TO BE PROCESSED BEFORE SELECTION OF TRANSACTIONS STOPS. C IS A NUMBER FROM 1 TO 9.). UQ84131 TYPE = PTF DATE/TIME REC = :38:54 PRE VER(001) = UQ81732 SUPING VER(001) = DQ80456 MAC = DSPXPCA DSPXPCC DSPXPCE DSPXPCG MOD = DSPXAUD0 DSPXPDSP DSPXPSTE HOLDSYSTEM(INT) = DOC ++ HOLD(UQ84131) SYS FMID(HMK7700) REASON(DOC) DATE(04015) (DOCUMENTATION CHANGE FOR APAR PQ80456 SC This information applies to Appendix E with the section titled "Opening HALDB Partitions". The fields of the "Partition Default Information" panel are changed. The description of the 'Anchor' field is changed to show that the valid range is _ The description of the 'High block number' is changed to show th

10 a zero is a valid value. The valid range is ). UQ84257 TYPE = PTF DATE/TIME REC = :38:58 PRE VER(001) = UQ49463 UQ61540 UQ71085 UQ72575 UQ75234 SUPING VER(001) = DQ32615 DQ77464 UQ38436 MACUPD = DFSPDIR MOD = DFSCPPD0 DFSDBLI0 DFSDLMP0 SRCUPD = DFSCPPD0 DFSDBLI0 DFSDLMP0 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ84257) SYS FMID(HMK7700) REASON(DOC) DATE(04020) (DOCUMENTATION CHANGE FOR APAR PQ77464 GC The first sentence of the Programmer Response for message DFS561I in the Messages and Codes manual has been changed from To regain use of the affected block, the system must be shut down, the error condition corrected, and the system restarted. to To regain use of the affected block, perform ACBLIB online change (/MODIFY PREPARE ACBLIB and /MODIFY COMMIT) or shut down the system, correct the error condition, and restart the system.). UQ84259 TYPE = PTF DATE/TIME REC = :38:59 SUPING VER(001) = DQ81735 VQ81735 MACUPD = DCLIST PCHCOMV HOLDSYSTEM(INT) = DOC ++ HOLD(UQ84259) SYS FMID(HMK7700) REASON(DOC) DATE(04020) (DOCUMENTATION CHANGE FOR APAR PQ81735 GC Change: 'Table 16. Maximum Occurrences of Each IMS System Definition Macro Statement' TERMINAL 200,000 TYPE 200,000). HOLDSYSTEM(INT) = IOGEN ++ HOLD(UQ84259) SYS FMID(HMK7700) REASON(IOGEN) DATE(04020) (AFTER THIS MAINTENANCE IS ACCEPTED AN IMS "CTLBLKS" SYSGEN IS REQUIRED. VTAM USERS SYSGEN REQUIRED

11 VTAM USERS SYSGEN REQUIRED VTAM USERS SYSGEN REQUIRED This service DOES require a CTLBLKS SYSGEN. The reason it is required is due to a change in the IPAGE size for static VTAM terminals. See the APAR coverletter for further details. >DBCTL Only Users< are >NOT< required to perform a sysgen.). UQ84260 TYPE = PTF DATE/TIME REC = :38:59 FMID VER(001) = JMK7702 REQ VER(001) = UQ84259 SUPING VER(001) = DQ81735 UQ83427 VQ81538 VQ81735 MOD = DFSIINV0 SRCUPD = DFSIINV0 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ84260) SYS FMID(JMK7702) REASON(DOC) DATE(04020) (DOCUMENTATION CHANGE FOR APAR PQ81735 GC Change: 'Table 16. Maximum Occurrences of Each IMS System Definition Macro Statement' TERMINAL 200,000 TYPE 200,000). HOLDSYSTEM(INT) = IOGEN ++ HOLD(UQ84260) SYS FMID(JMK7702) REASON(IOGEN) DATE(04020) (AFTER THIS MAINTENANCE IS ACCEPTED AN IMS "CTLBLKS" SYSGEN IS REQUIRED. VTAM USERS SYSGEN REQUIRED VTAM USERS SYSGEN REQUIRED VTAM USERS SYSGEN REQUIRED This service DOES require a CTLBLKS SYSGEN. The reason it is required is due to a change in the IPAGE size for static VTAM terminals. See the APAR coverletter for further details. >DBCTL Only Users< are >NOT< required to perform a sysgen.). UQ84332 TYPE = PTF DATE/TIME REC = :39:00 PRE VER(001) = UQ68287 SUPING VER(001) = DQ81520 MOD = DFSUDMT0 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ84332) SYS FMID(HMK7700) REASON(DOC) DATE(04023)

12 (DOCUMENTATION CHANGE FOR APAR PQ81520 GC IMS V7 Messages and Codes needs to be updated. In IMS user abend code section, the following message should be added under U0225: 16 = The return from DFSMS was zero, however the utility's UIM (user interaction module) was not invoked for data set complete notification. This would indicate that DFSMS DUMP processing did not complete successfully. (Note: The doc change must NOT be propagated to V8 or V9 books.)). UQ84662 TYPE = PTF DATE/TIME REC = :39:04 PRE VER(001) = UQ49123 UQ49987 UQ52634 UQ53211 UQ55295 UQ55863 UQ55983 UQ58198 UQ58468 UQ61560 UQ71034 UQ75705 SUPING VER(001) = DQ72975 DQ73193 DQ74336 DQ79181 DQ80012 UQ77006 UQ77479 UQ78446 MOD = DFSDLOC0 DFSSBID0 SRCUPD = DFSDLOC0 DFSSBID0 HOLDSYSTEM(INT) = DOC ++ HOLD(UQ78446) SYS FMID(HMK7700) REASON(DOC) DATE(04030) (DOCUMENTATION CHANGE FOR APAR PQ74336 GC DFSDLOC0: Code added after label NOTBAT24 to recognize if an invalid index is specified on the INDICES parameter and issue message DFS0730I with an I70 return code, indicating that an invalid index was specified and the data base will not be open. The discovery of an incorrect index is based on the existence of expansion block (SDBXPANS) and the set of the flag SDBXPRES. The Message and Codes manual GC have been updated as follows to document the new reason code I,70 for message DFS0730I. Explanation: An invalid index has been defined on an INDICES parameter of a SENSEG statement of a PCB during PSB generation. Programmer Response: Correct the INDEX name specified on the INDICES parameter of the senseg statement of the PCB in question. Problem Determination: None Also we would like you to know that APAR PQ73710 was created to prevent such errors form happening and capturing them during ACBGEN. Please, refer to the description of APAR PQ73710 and is advisable to be applied. ).