HOLDDATA FOR IMS 9.1 PUT Level ** Please read all of the HOLDDATA before acting on any of it. **

Transcription

1 HOLDDATA FOR IMS 9.1 PUT Level 0801 ** Please read all of the HOLDDATA before acting on any of it. ** ************************************************************************ Please pay close attention to the holddata for the following PTFs with action items. UK32704 UK33224 UK33440 ********** HOLDDATA **************************************************** UK32704 TYPE = PTF DATE/TIME REC = :09:04 SOURCEID = PUT0801 SMCCOR SUPING VER(001) = DK52420 MACUPD = DBD HOLDSYSTEM(INT) = ACTION ++ HOLD(UK32704) SYS FMID(HMK9900) REASON(ACTION) DATE(08002) (This hold is applicable to PSINDEX users only. If not using PSINDEX database this hold can be ignored. The application of this service does not require a DBDGEN or ACBGEN. If an DBDGEN and ACBGEN are not performed the default value of NOPROT will remain in the PSINDEX until a DBDGEN and ACBGEN are performed. An DBDGEN followed by ACBGEN are required to implement the change the NOPROT value to PROT for PSINDEX databases. Read this entire hold card and any additional hold cards for other actions required to install this service correctly. Additional information may be found in the coverletter.). UK32790 TYPE = PTF DATE/TIME REC = :09:05 SOURCEID = PUT0801 SMCCOR PRE VER(001) = UK28607 SUPING VER(001) = DK54996 MOD = DFSKCIMS DFSKSMU1 DFSKSTG0 SAMP = DFSKSMJI DFSKSMJK HOLDSYSTEM(INT) = DOC ++ HOLD(UK32790) SYS FMID(HMK9900) REASON(DOC) DATE(08007) (DOCUMENTATION CHANGE FOR APAR PK54996 SC In the Utilities System: Reference manual In the Chapter discussing:

2 UK33224 TYPE = PTF DATE/TIME REC = :09:14 SOURCEID = HIPER SMCCOR PRE VER(001) = UK15224 SUPING VER(001) = DK58787 MOD = DFSYOPEN AOI Security Conversion Utilities (DFSKCIMS, DFSKSMU1, and DFSKAOI1) A> In the Section discussing: RACF Control Statement Generation (DFSKCIMS) Remove the reference to AOI=YES B> In the Section discussing: DD Statements Under the Item under: CONTROL DD and Sub item AOI: Valid values include: AOI=TRAN AOI=CMD Note: AOI=YES is not supported End of doc change Part DFSKCIMS was changed to disallow specification of control statement AOI=YES. If such is specified a message specifying ' RACF CONTROL STATEMENT GENERATION IS NOT SUPPORTED FOR AOI=YES' is returned, indicating that this control statement is disallowed, and processing terminates with cond code 8. Part DFSKSMU1 was changed to process control statement CTRANSACT in the same manner that CTRANS is processed. Part DFSKSTG0 was changed to default to AOI=TRAN if this keyword is not specified. End of Doc change Parts DFSKSMJI and DFSKSMJK were changed to better align JCL statements containing the DSN= parameter.). HOLDSYSTEM(INT) = ACTION ++ HOLD(UK33224) SYS FMID(HMK9900) REASON(ACTION) DATE(08024) (++ + Hold for APAR PK After applying this maintenance, standalone program DFSYSVI0+ + must be run to reinitialize OTMA C/I. + ++). UK33342 TYPE = PTF DATE/TIME REC = :09:16 SOURCEID = HIPER PUT0801 SMCCOR PRE VER(001) = UK00926 UK04702 UK31320 UQ83716 UQ95535 SUPING VER(001) = DK58191 MOD = DBFSLGE0 DBFSLGE2 SRCUPD = DBFSLGE0 DBFSLGE2 HOLDSYSTEM(INT) = DOC ++ HOLD(UK33342) SYS FMID(HMK9900) REASON(DOC) DATE(08030)

3 (DOCUMENTATION CHANGE FOR APAR PK58191 LY : IMS V9 Failure Analysis Structure Tables for Dump Analysis ABENDU1026: 1026 Subcode summary: x'80' DENDRDF doesn't match with CI RDF x'81' DENDRRBA doesn't match with DMHRSRBA). UK33343 TYPE = PTF DATE/TIME REC = :09:16 SOURCEID = SMCCOR PRE VER(001) = UK08537 UK23298 UK29008 UK29719 UK30461 SUPING VER(001) = DK46231 MOD = HWSM1ENU HWSSDCON HWSSDDSC HWSSDOTD HWSSDRCV HWSSDTTD HWSSDXMT HOLDSYSTEM(INT) = AO ++ HOLD(UK33343) SYS FMID(HMK9900) REASON(AO) DATE(08030) (********************************************************* + Hold for APAR PK This APAR changes or affects an IMS message. IMS Message number: HWSP1415E HWSP1415I HWSP1485E Any user exits or nonibm vendor software which are sensitive to this message may need to be changed. See the APAR closing text or PTF cover letter for complete details *********************************************************). HOLDSYSTEM(INT) = DOC ++ HOLD(UK33343) SYS FMID(HMK9900) REASON(DOC) DATE(08030) (DOCUMENTATION CHANGE FOR APAR PK46231 SC The text of message HWSP1415E, HWSP1415I, and HWSP1485E have been enhanced. The client id and session IP address are appended to the end of the existing message text. Documentation update: The following documentation update describes the updated message text for HWSP1415E, HWSP1415I and HWSP1485E. Updated lines are denoted by the change bar ( ) in column 1. IMS Connect Guide and Reference SC , chapter 17 'IMS Connect Error Codes and Messages'. HWSP1415E TCP/IP SOCKET FUNCTION CALL FAILED; F=fn, R=rc, E=ec, M=mc, ID=cn, IPvn=ip Explanation: The IMS Connect TCP/IP driver is unable to perform the specified socket function. HWSP1415E is issued during normal execution of IMS Connect. HWSP1415I is issued

4 during shutdown of IMS Connect. In the message text: fn identifies the TCP/IP socket function call. rc identifies the TCP/IP return code. ec identifies the TCP/IP error code. mc identifies the module issuing the message. cn identifies the client name or port name ip identifies the TCP/IP IP address when applicable n identifies the IP addressing standard (e.g. IPv4, IPv6) System Action: This message is issued and IMS Connect continues to run. HWSP1415I TCP/IP SOCKET FUNCTION CALL FAILED; F=fn, R=rc, E=ec, M=mc, ID=cn, IPvn=ip Explanation: The IMS Connect TCP/IP driver is unable to perform the specified socket function. HWSP1415E is issued during normal execution of IMS Connect. HWSP1415I is issued during shutdown of IMS Connect. In the message text: fn identifies the TCP/IP socket function call. rc identifies the TCP/IP return code. ec identifies the TCP/IP error code. mc identifies the module issuing the message. cn identifies the client name or port name ip identifies the TCP/IP IP address when applicable n identifies the IP addressing standard (e.g. IPv4, IPv6) System Action: This message is issued and IMS Connect continues to run. System Programmer Response: For the possible cause of the specified return cod and error code, see TCP/IP Application Programming Interface Reference. HWSP1485E PASSING TO TCP/IP ASYNC FAILED; F=fn, R=rc, E=ec, M=mc, ID=cn, IPvn=ip Explanation: TCP/IP rejects the request for asynchronous function processing. In the message text: fn identifies the TCP/IP socket function call. rc identifies the TCP/IP return code. ec identifies the TCP/IP error code.

5 mc identifies the module issuing the message. cn identifies the client name or port name ip identifies the TCP/IP IP address when applicable n identifies the IP addressing standard (e.g. IPv4, IPv6) System Action: This message is issued and IMS Connect continues to run. System Programmer Response: For the possible cause of the specified return and error codes, see TCP/IP Application Programming Interface Reference.). UK33358 TYPE = PTF DATE/TIME REC = :09:17 SOURCEID = SMCCOR SUPING VER(001) = DK14259 DK15134 DK17453 DK19559 DK28574 DK38715 DK44863 DK45036 DK57180 UK10551 UK11481 UK12337 UK12338 UK17292 UK22943 UK26233 UK26300 MOD = DFSKSCR0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK10551) SYS FMID(HMK9900) REASON(DOC) DATE(08030) (DOCUMENTATION CHANGE FOR APAR PK14259 SC GC On the "IMS V9 Utilities Reference: System", chapter "6.4 IMS Records User Data Scrub Utility (DFSKSCR0)" The list of record considered is updated as follows: The IMS Records User Data Scrub utility (DFSKSCR0) scans all the records and eliminates those parts of the records that contain sensitive or confidential user data such as customer business informatio DFSKSCR0 specifically removes log records X'01', X'03', x'4002', X'50', X'5903', X'5950', and X'67'. The example in section " Example of DFSKSCR0" is changed CONTROL CNTL STOPAFT=EOF ************************************************** * IMSV9 INPUT LOG DATA SET NAME(S): * * IMSVS.TEST.LOG ************************************************** * * * RECORDS USER DATA SCRUB * * * ************************************************** OPTION COPY E=DFSKSCR0 * DFS707I END OF FILE ON INPUT #01 RECORDS PROCESSED: 33 #03 RECORDS PROCESSED: 16 #4002 RECORDS PROCESSED: 3 #50 RECORDS PROCESSED: 0 #5901 RECORDS PROCESSED: 2 #5903 RECORDS PROCESSED: 2 #5950 RECORDS PROCESSED: 0 #67 RECORDS PROCESSED: 7 DFS708I OPTION COMPLETE

6 DFS703I END OF JOB Figure 228. Report Produced Using DFSKSCR0 Also in the "IMS V9 Release Planning Guide manual", chapter "2.8.1 Overview" add the new record to the list. IMS Records User Data Scrub Utility (DFSKSCR0) The IMS Records User Data Scrub utility (DFSKSCR0) performs a all of the IMS logs. The utility deletes those record parts th contain sensitive or confidential customer business transactio tion, in particular, X'01', X'03', x'4002', X'50', X'5901', X' X'5950', and X'67'. The deletion does not compromise the integ the content of the vital IMS system data. This scrub is useful you must send IMS log data to an outside organization for anal). HOLDSYSTEM(INT) = DOC ++ HOLD(UK33358) SYS FMID(HMK9900) REASON(DOC) DATE(08030) (DOCUMENTATION CHANGE FOR APAR PK57180 SC In the Utilities Reference: System manual In the Chapter 'IMS Records User Data Scrub Utility (DFSKSCR0) In the topic 'Example of DFSKSCR0' In the Figure illustrating the report, the following line is added: #48 RECORDS PROCESSED: 3 End of doc change Part DFSKSCR0 was changed to interrogate the byte indicating that the contents of the user data is a SPA <Scratch Pad Area>. When this bit has been set to on <x'04'>, the leading 6 bytes of the user data <LLZZCC> are retained. If this indicator is off, the leading 4 bytes are retained. This check is performed individually for each user area contained in the x'01', x'03' and x'4002' log records. Additionally, all of the data between the fixed length header and suffix of the x'48' log records is scrubbed.). UK33388 TYPE = PTF DATE/TIME REC = :09:18 SOURCEID = SMCCOR PRE VER(001) = UK17000 UK29008 UK33343 SUPING VER(001) = DK31365 DK57769 UK22364 MOD = HWSCHWS0 HWSFM060 HWSLEPS0 HWSOBND0 HWSSDCLS HWSSDOPN HWSSDRCV HWSXCFG0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK33388) SYS FMID(HMK9900) REASON(DOC) DATE(08031) (DOCUMENTATION CHANGE FOR APAR PK57769 SC The following documentation update is made to describe the usage of the new MAXSIZE= parameter.

7 IMS Connect Guide and Reference, v9.1 SC189287xx Chapter 4, IMS Connect Definition and Tailoring, Subject, Defining the IMS Connect Environment, Topic, Creating the IMS Connect Configuration Member. HWS statement. New Keyword 'MAXSIZE=' is added as such: MAXSIZE= A decimal field set to the maximum message size that will be allowed in the four byte total length field that preceeds the IRM. Use the MAXSIZE= parm to override the internal default of 10,000,000.). HOLDSYSTEM(INT) = ENH ++ HOLD(UK33388) SYS FMID(HMK9900) REASON(ENH) DATE(08031) (********************************************************* APAR PK57769 adds new IMS function. Function name: MAXSIZE= configuration parameter See APAR closing text or PTF cover letter for complete details. *********************************************************). UK33440 TYPE = PTF DATE/TIME REC = :09:19 SOURCEID = HIPER SMCCOR PRE VER(001) = UK02154 UK08318 UK09301 UK10128 UK19292 UK19395 UK23065 UK24385 UK27460 UK32259 UK32354 UQ85867 UQ85969 UQ87637 UQ88167 UQ90190 UQ93228 UQ94415 UQ94785 UQ95028 UQ95706 UQ97159 SUPING VER(001) = DK07260 DK38035 DK40649 DK49087 UK09949 UK27382 UK27796 MACUPD = DFSDDIR DFSLOG29 MOD = DFSDBAU0 DFSORP60 DFSORR00 DFSRDBP0 SRCUPD = DFSDBAU0 DFSRDBP0 HOLDSYSTEM(INT) = ACTION ++ HOLD(UK33440) SYS FMID(HMK9900) REASON(ACTION) DATE(08032) (********************************************************* APAR PK40649 changes the content of the IMS type X'29' log record. Log record type (in hex): 29 Macro changed: DFSLOG29 Old header size : x'020' New header size : x'020' New subtype : 11 New size: x'022' Fields added: HORCOFLG1, HORCONODEL, HORCODEL, HORCORATEV, HORCOWLEN New subtype : 71 New size: x'020' Fields added: None Any user modifications or nonibm vendor software which references this block must be changed and/or reassembled to include the new size. *********************************************************). HOLDSYSTEM(INT) = DOC ++ HOLD(UK33440) SYS FMID(HMK9900) REASON(DOC) DATE(08032) (DOCUMENTATION CHANGE FOR APAR PK40649 LY

8 IMS V9 Diagnosis Guide and Reference LY Chapter 7 System Service Aids Section: Log Records The new subtypes 2911 and 2971 need to be added to table 184, IMS log records used to analyze IMS problems. Add the following text under the 29 record: X'11': Conditional ownership established. An attempt to establish ownership will be made. (DFSORP60) X'71': Conditional cursor inactivate. An attempt to reset the cursor will be made. (DFSORP60) Chapter 7 System Service Aids Section: Format of a 29 record The new subtypes 2911 and 2971 need to be added to list of 29 record subtypes. After the list prefix, "This topic shows the log record formats for:", add the following descriptions: X'2911': Conditional ownership established X'2971': Conditional reset of the cursor active Chapter 7 System Service Aids Section: Format of a 29 record Each 29 record subtype is described in this section. The two new subtypes need to be added to this section. Add a new heading for the X'2911'. Under that heading add the following explanation: An attempt to establish ownership of OLR in the RECON will be made. The ownership may or may not be recorded in the RECON for this partition. When OLR has established ownership, this log record contains the dataset retention (DEL/NODEL) and rate options specified on the INIT OLREORG command. After the explanation add the following table: The fields in the X'2911' log record are: Offset Length (Hex.) (Dec.) Field Name Field Description 00 2 HORLENG Length of this record. including length field and the sequence number 02 2 HORRSV1 X'0000' 04 1 HORTYPE X'29' Record type 05 1 HORSTYPE X'11' Record subtype 06 2 HORPSTNO PST number 08 8 HORRSENM RSE name or IMS ID 10 8 HORDBD DBD name

9 18 8 HORPSB PSB name 18 1 HORPSB0 C'0' 19 7 HORPART Partition name 20 1 HORCOFLG1 Flags: " " The INITIATE OLREORG command had the NODEL option. " " The INITIATE OLREORG command had the DELETE option HORCORATEV RATE value Add a new heading for the X'2971'. Under that heading add the following explanation: OLR has completed copying all data from the input datasets to the output datasets. Following this log record an attempt to reset cursor active in the RECON will be made. After the explanation add the following table: The fields in the X'2971' log record are: Offset Length (Hex.) (Dec.) Field Name Field Description 00 2 HORLENG Length of this record. including length field and the sequence number 02 2 HORRSV1 X'0000' 04 1 HORTYPE X'29' Record type 05 1 HORSTYPE X'71' Record subtype 06 2 HORPSTNO PST number 08 8 HORRSENM RSE name or IMS ID 10 8 HORDBD DBD name 18 8 HORPSB PSB name 18 1 HORPSB0 C'0' 19 7 HORPART Partition name ).