CA JCLCheck Workload Automation CA RS 1403 Service List

Transcription

1 CA JCLCheck Workload Automation CA RS 1403 Service List Description Hiper 12.0 RO60035 JCLNEAT INCORRECTLY SHIFTS 'DD' STATEMENT RO60996 JCLNEAT REFORMAT ERROR RO65785 LOOP IN JCLCHECK RO66178 INCORRECT CAY6047E WHEN OUTFILE QUOTED RO66179 DB2 REBIND PLANMGMT PARAMETER SUPPORT RO66485 CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN RO66503 UTILITY CARDS GET ERRORS WHEN SPAN CONCAT DSN'S RO66510 CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN RO67240 ADDITIONAL PROBLEMS WITH Z/OS 2.1 JCL RO67275 RELATIONAL SYMBOLIC KEYWORD NOT RESOLVED CORRECTLY RO67580 LOOP AFTER RO66503 IS DDNAME= POINTS TO DD * IN CONCAT The CA RS 1403 service count for this release is 11

2 CA JCLCheck Workload Automation CA RS 1403 Service List Description Hiper 11.0 RO65003 JCLNEAT INCORRECTLY SHIFTS DD STATEMENT RO65543 S ABEND PROCESSING CA JCLCHECK batch The CA RS 1403 service count for this release is 2

3 CA JCLCheck Workload Automation 3 CA RS 1403 Service List for CAZ1B00 FMID Service Description Hiper CAZ1B00 RO65003 JCLNEAT INCORRECTLY SHIFTS DD STATEMENT The CA RS 1403 service count for this FMID is 1

4 CA JCLCheck Workload Automation 4 CA RS 1403 Service List for CAZ1C00 FMID Service Description Hiper CAZ1C00 RO60035 JCLNEAT INCORRECTLY SHIFTS 'DD' STATEMENT RO60996 JCLNEAT REFORMAT ERROR RO66510 CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN The CA RS 1403 service count for this FMID is 3

5 CA JCLCheck Workload Automation 5 CA RS 1403 Service List for CAZ2B00 FMID Service Description Hiper CAZ2B00 RO65543 S ABEND PROCESSING CA JCLCHECK batch The CA RS 1403 service count for this FMID is 1

6 CA JCLCheck Workload Automation 6 CA RS 1403 Service List for CAZ2C00 FMID Service Description Hiper CAZ2C00 RO65785 LOOP IN JCLCHECK RO66178 INCORRECT CAY6047E WHEN OUTFILE QUOTED RO66179 DB2 REBIND PLANMGMT PARAMETER SUPPORT RO66485 CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN RO66503 UTILITY CARDS GET ERRORS WHEN SPAN CONCAT DSN'S RO67240 ADDITIONAL PROBLEMS WITH Z/OS 2.1 JCL RO67275 RELATIONAL SYMBOLIC KEYWORD NOT RESOLVED CORRECTLY RO67580 LOOP AFTER RO66503 IS DDNAME= POINTS TO DD * IN CONCAT The CA RS 1403 service count for this FMID is 8

7 CA JCLCheck Workload Automation CA RS PTF RO RO60035 RO60035 M.C.S. ENTRIES = ++PTF (RO60035) JCLNEAT INCORRECTLY SHIFTS 'DD' STATEMENT JCLNEAT incorrectly formats DD Statements with multiple symbolics. Incorrect output from JCLNEAT. JCL is not valid and may fail. None. PRODUCTS AFFECTED: JCLCheck R12.0 JCLCHK 922 Copyright (C) 2013 CA. All rights reserved. R00071-AJ6120-SP1 DESC(JCLNEAT INCORRECTLY SHIFTS 'DD' STATEMENT). FMID (CAZ1C00) PRE ( RO53748 RO54060 ) SUP ( TR60035 )

8 CA JCLCheck Workload Automation CA RS PTF RO RO60996 RO60996 M.C.S. ENTRIES = ++PTF (RO60996) JCLNEAT REFORMAT ERROR JCLNeat is improperly formatting JCL statements that include inline comments. JCLNeat incorrectly reformats some JCL statements that contain inline comments. The JCL produced is invalid. Reformatted JCL is invalid and will not run. None. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 927 Copyright (C) 2013 CA. All rights reserved. R00078-AJ6120-SP1 DESC(JCLNEAT REFORMAT ERROR). FMID (CAZ1C00) PRE ( RO54060 ) SUP ( TR60996 )

9 CA JCLCheck Workload Automation CA RS PTF RO RO65785 RO65785 M.C.S. ENTRIES = ++PTF (RO65785) LOOP IN JCLCHECK It is possible for JCLCheck batch job to loop while processing jcl statements. The problem is most likely to occur when the Job being processed contains a jcl statement which executes a cataloged procedure member with a slash asterisk. No error message is displayed. JCLCheck loops. CA JCLCheck batch Jobs continue to execute until a cancel command is issued. The JCLCheck batch job loops. Remove slash asterisk statement from cataloged procedure member. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 951 Copyright (C) 2014 CA. All rights reserved. R00109-AJ6120-SP1 DESC(LOOP IN JCLCHECK). FMID (CAZ2C00) PRE ( RO53749 RO54309 RO57344 RO63084 RO64463 ) SUP ( TR65785 )

10 CA JCLCheck Workload Automation CA RS PTF RO RO66178 RO66178 M.C.S. ENTRIES = ++PTF (RO66178) INCORRECT CAY6047E WHEN OUTFILE QUOTED When validating an IDCAMS job which contains the following control statement: REPRO INFILE(FILEIN) OUTFILE('ABCDEFG ') JCLCheck displays the following 2 error messages even though IDCAMS accepts the control statement without displaying any error message: CAY6047E VALUE OF PARAMETER 'OUTFILE' SHOULD NOT BE QUOTED CAY6125E DDNAME '...' NOT FOUND JCLCheck displays the following 2 error messages even though IDCAMS accepts the control statement without displaying any error message: CAY6047E VALUE OF PARAMETER 'OUTFILE' SHOULD NOT BE QUOTED CAY6125E DDNAME '...' NOT FOUND JCLCheck continues to function normally after the error messages are displayed. Eliminate the quote marks around the OUTFILE parameter. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 958 Copyright (C) 2014 CA. All rights reserved. R00115-AJ6120-SP1 DESC(INCORRECT CAY6047E WHEN OUTFILE QUOTED). FMID (CAZ2C00) PRE ( RO55854 RO56298 RO60863 RO61320 RO61710 ) SUP ( TR66178 )

11 CA JCLCheck Workload Automation CA RS PTF RO RO66179 RO66179 M.C.S. ENTRIES = ++PTF (RO66179) DB2 REBIND PLANMGMT PARAMETER SUPPORT When validating a DB2 REBIND control statement containing the PLANMGMT parameter, JCLCheck displays the following error message: CAY6037E UNKNOWN KEYWORD 'PLANMGMT' SPECIFIED IN OPERAND OF 'REBIND' JCLCheck displays the following error message: CAY6037E UNKNOWN KEYWORD 'PLANMGMT' SPECIFIED IN OPERAND OF 'REBIND' JCLCheck displays the following error message and continues to function normally: CAY6037E UNKNOWN KEYWORD 'PLANMGMT' SPECIFIED IN OPERAND OF 'REBIND' When using the REBIND PLANMGMT parameter, there is no circumvention. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 959 Copyright (C) 2014 CA. All rights reserved. R00116-AJ6120-SP1 DESC(DB2 REBIND PLANMGMT PARAMETER SUPPORT). FMID (CAZ2C00) PRE ( RO55854 RO56298 RO60863 RO61320 RO61710 ) SUP ( RO66178 TR66178 TR66179 )

12 CA JCLCheck Workload Automation CA RS PTF RO RO66485 RO66485 M.C.S. ENTRIES = ++PTF (RO66485) CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN Message CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN issued if a sort statement is over 100 lines long. Message CAY6582S is issued and remaining statements are process as a new statement. This generate additional error messages. Sort statements over 100 lines long cannot be validated Set the NOCTL option to bypass sort control card validation. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 957 Copyright (C) 2014 CA. All rights reserved. R00119-AJ6120-SP1 DESC(CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN). FMID (CAZ2C00) SUP ( RO54516 RO64519 TR54516 TR63919 TR64519 TR66485 ) ++IF FMID(CAZ1C00) REQ( RO66510).

13 CA JCLCheck Workload Automation CA RS PTF RO RO66503 RO66503 M.C.S. ENTRIES = ++PTF (RO66503) UTILITY CARDS GET ERRORS WHEN SPAN CONCAT DSN'S When control card statements are incomplete in one DD and completed in a concatenated DD that follows, the statement is not considered to be a single statement. This causes errors similar to the following, CAY6020E EXPECTED CONTINUATION NOT RECEIVED CAY6018E UNMATCHED PARENTHESES CAY6006S VERB 'xxxx' IS UNKNOWN Depending on the utility being used and the statement being processed the errors reported may vary. Error messages similar to the following, CAY6020E EXPECTED CONTINUATION NOT RECEIVED CAY6018E UNMATCHED PARENTHESES CAY6006S VERB 'xxxx' IS UNKNOWN Depending on the utility being used and the statement being processed the errors reported may vary. Control card statements that span concatenated DD may produce invalid error messages Prevent statements from spanning concatenated datasets. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 962 Copyright (C) 2014 CA. All rights reserved. R00120-AJ6120-SP1 DESC(UTILITY CARDS GET ERRORS WHEN SPAN CONCAT DSN'S). FMID (CAZ2C00) PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO60863 RO61710 RO64463 ) SUP ( TR58510 TR66503 )

14 CA JCLCheck Workload Automation CA RS PTF RO RO66510 RO66510 M.C.S. ENTRIES = ++PTF (RO66510) CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN Message CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN issued if a sort statement is over 100 lines long. Message CAY6582S is issued and remaining statements are process as a new statement. This generate additional error messages. Sort statements over 100 lines long cannot be validated Set the NOCTL option to bypass sort control card validation. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 957 Copyright (C) 2014 CA. All rights reserved. R00119-AJ6120-SP1 DESC(CAY6582S STATEMENT BUFFER HAS BEEN OVERRUN). FMID (CAZ1C00) PRE ( RO55852 RO56649 RO60862 ) SUP ( TR66510 ) ++IF FMID(CAZ2C00) REQ( RO66485).

15 CA JCLCheck Workload Automation CA RS PTF RO RO67240 RO67240 M.C.S. ENTRIES = ++PTF (RO67240) ADDITIONAL PROBLEMS WITH Z/OS 2.1 JCL This PTF corrects several problems reported with z/os 2.1: LINKER/BINDER keyword ALIGNT not supported JOB statement keyword UJOBCORR not supported OUTPUT statement keyword DDNAME not supported Symbols set by PROC statement not properly resolved in-stream User defined SORT symbol not properly processed Any of these new keywords are incorrectly flagged as errors, symbols set by PROC result in in-stream statements being incorrectly flagged, and user defined SORT symbols can be incorrectly flagged. Valid JCL incorrectly flagged as erroneous. None for these keywords and features. PRODUCT(S) AFFECTED: CA JCLCheck WA Release 12.0 JCLCHK 952 Copyright (C) 2014 CA. All rights reserved. R00133-AJ6120-SP1 DESC(ADDITIONAL PROBLEMS WITH Z/OS 2.1 JCL). FMID (CAZ2C00) PRE ( RO53749 RO54309 RO55854 RO56298 RO56652 RO57344 RO60863 RO61320 RO61710 RO63084 RO64463 RO64948 RO65035 RO66485 RO66503 ) SUP ( RO54516 RO64519 RO65785 RO66178 RO66179 TR54516 TR63919 TR64519 TR65785 TR65977 TR66178 TR66179 TR67240 )

16 CA JCLCheck Workload Automation CA RS PTF RO RO67275 RO67275 M.C.S. ENTRIES = ++PTF (RO67275) RELATIONAL SYMBOLIC KEYWORD NOT RESOLVED CORRECTLY JCLCheck relational expression symbolic keyword is not resolved correctly. The problem is most likely to occur when the Job being processed executes a procedure that contains a JCL "IF" statement relational expression keyword, and the symbolic expression keyword is null. Example: //ssssss EXEC nnnnnnnn,abnot=,xs='callit' CA JCLCheck batch Jobs terminate with a condition code 8, with messages : CAY6019E, CAY6332E, CAY6050E, CAY6145I and CAY6018E. The JCLCheck batch job terminates with condition code 8. None PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 966 Copyright (C) 2014 CA. All rights reserved. R00134-AJ6120-SP1 DESC(RELATIONAL SYMBOLIC KEYWORD NOT RESOLVED CORRECTLY). FMID (CAZ2C00) PRE ( RO53749 RO64463 RO67240 ) SUP ( TR66706 TR67275 )

17 CA JCLCheck Workload Automation CA RS PTF RO RO67580 RO67580 M.C.S. ENTRIES = ++PTF (RO67580) LOOP AFTER RO66503 IS DDNAME= POINTS TO DD * IN CONCAT A loop can occur after applying PTF RO66503 if a Control Card input DD concatenation contains a '// DD DDNAME=name' that points to a DD of the form '//name DD *'. Loop. Job does not complete, must be cancelled. job must be cancelled. none. PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0 JCLCHK 981 Copyright (C) 2014 CA. All rights reserved. R00141-AJ6120-SP1 DESC(LOOP AFTER RO66503 IS DDNAME= POINTS TO DD * IN CONCAT). FMID (CAZ2C00) PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO64463 RO66503 RO67240 RO67275 ) SUP ( AR66503 TR67433 TR67555 TR67580 )

18 CA JCLCheck Workload Automation CA RS PTF RO RO65003 RO65003 M.C.S. ENTRIES = ++PTF (RO65003) DESC (JCLNEAT INCORRECTLY SHIFTS DD STATEMENT) /* PRODUCT: CA-JCLCHECK-MVS RELEASE: 11.0 DATE: 13 NOV 2013 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: JCLCHK PROBLEM NUMBER: JCLNEAT INCORRECTLY SHIFTS DD STATEMENT THE DD STATEMENT IS INCORRECTLY FORMATTED WHEN MULTIPLE SYMBOLICS ARE USED PROBLEM RESOLUTION: APPLY THE FOLLOWING PTF TO ALL AFFECTED SYSTEM(S). RELOAD ANY RESIDENT MODULES, REFRESH LLA IF NECESSARY. IF THE PROBLEM IS OCCURRING WHILE USING CHEKPLEX, THEN RESTART ALL GTS ADDRESS SPACES WHERE CHEKPLEX IS ACTIVE. ***NOTE*** RETAIN ALL OUTPUT FOR FUTURE REFERENCE */. FMID(CAZ1B00) PRE (RO50882) SUP (T5DH131).

19 CA JCLCheck Workload Automation CA RS PTF RO RO65543 RO65543 M.C.S. ENTRIES = ++PTF (RO65543) DESC (S ABEND PROCESSING CA JCLCHECK batch) /* PRODUCT: CA-JCLCHECK-MVS Common Component RELEASE: 11.0 DATE: 2 DEC 2013 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: CM-Z2 PROBLEM NUMBER: S ABEND PROCESSING CA JCLCHECK batch It is possible to abend with an S or other storage related codes while processing CA JCLCHECK batch with the SMS option active. The problem is most likely to occur when there are 2-3 Thousand JCL members with SMS controlled datasets being processed, the JCLCheck SMS option is active and apar RO55456 is applied PROBLEM RESOLUTION: APPLY THE FOLLOWING PTF TO THE SYSTEM. ***NOTE*** RETAIN THE PRINTED OUTPUT FOR REFERENCE */. FMID(CAZ2B00) SUP (T5J0302,AR55456,RO55456,TACH438).