HOLDDATA FOR IMS 10.1 PUT Level ** Please read all of the HOLDDATA before acting on any of it. **

Transcription

1 HOLDDATA FOR IMS 10.1 PUT Level 0802 ** Please read all of the HOLDDATA before acting on any of it. ** ************************************************************************ Please pay close attention to the holddata for the following PTFs with action items. The PTF numbers are: UK29251 UK32566 ********** HOLDDATA **************************************************** UK28762 TYPE = PTF DATE/TIME REC = :41:32 SOURCEID = HIPER PUT0709 RSU0710 RSU0712 SMCCOR PRE VER(001) = UK20125 UK20177 UK20179 UK20185 UK22024 UK22037 UK22397 UK23225 UK23250 UK23367 UK23580 UK23666 UK24270 UK25147 UK25613 UK25754 UK26478 UK26506 UK26660 UK26828 UK26860 UK27819 UK27865 SUPING VER(001) = DK45201 DK45369 DK47607 UK27294 UK27892 MACUPD = DBFEPST DBFESCD DBFLGRIM DFSINSXP MOD = DBFCPY00 DBFHGU10 DBFNRST0 DFSIU010 DFSODC10 DFSRIMP0 DFSRTR20 DFSTRS00 SRCUPD = DBFCPY00 DBFHGU10 HOLDERROR = DK HOLD(UK28762) FMID(HMK1010) REASON(DK58557) ERROR DATE(08068) (SMRTDATA(FIX(UK34111) CHGDT(080308))) CLASS(PE). HOLDSYSTEM(INT) = DOC ++ HOLD(UK27294) SYS FMID(HMK1010) REASON(DOC) DATE(07247) (DOCUMENTATION CHANGE FOR APAR PK45369 ZES The IMS V10 Command Reference, Volume 1 (ZES ) manual needs to be updated as follows: Add the following completion code description to the completion code table for the CREATE TRAN command: Completion Completion Meaning Error Text Code Code Text B5 ROUTING CODE Transaction create ALREADY EXISTS failed for Fast Path exclusive FP(E) tran. The routing code could not be created because one already exists with the same name as the tran to be created. ). HOLDSYSTEM(INT) = DOC ++ HOLD(UK28762) SYS FMID(HMK1010) REASON(DOC) DATE(07247) (DOCUMENTATION CHANGE FOR APAR PK45201 ZES : Command Reference Volume 1 ZES : Command Reference Volume 2

2 Command Reference Volume 1 :ZES Chapter 19. CREATE TRAN command Update the EMHBSZ keyword explanation: The value can be a number from 0 to Command Reference Volume 2 :ZES Chapter 31. UPDATE TRAN command Update the EMHBSZ keyword explanation: The value can be a number from 0 to ). UK29251 TYPE = PTF DATE/TIME REC = :41:13 SOURCEID = PUT0709 RSU0712 SMCCOR FMID VER(001) = JMK1012 PRE VER(001) = UK20178 REQ VER(001) = UK25613 UK29250 SUPING VER(001) = DK44137 DK50993 UK24071 UK25614 UK26423 UK27331 VK41723 VK44137 VK46652 VK48282 VK50993 MOD = DFSCPSM0 DFSRMSM0 SRCUPD = DFSCPSM0 DFSRMSM0 HOLDSYSTEM(INT) = ACTION ++ HOLD(UK25614) SYS FMID(JMK1012) REASON(ACTION) DATE(07257) (********************************************************* APAR PK44137 changes the *size* and/or *content* of an OM Audit Trail log record. Log record type (in hex): x'08' OM Audit Trail logrec Macro changed: CSLOLGCR Fields deleted: None Fields moved: None Fields added: None Fields changed: LGRSPCUS contains the userid that issued the command Any user modifications or nonibm vendor software which references these OM Audit Trail log records must be changed to take advantage of this new field if desired APAR PK44137 changes the *size* and/or *content* of an IMS log record. Log record type (in hex): x'22' Macro changed: DFSLOG22 Old size: x'038' (header data only, excluding extensions) New size: x'040' (header data only, excluding extensions) Fields deleted: None Fields moved: None Fields added: LOG22_USERID contains the userid that issued the command Any user modifications or nonibm vendor software which references this block must be changed and/or reassembled to include the new size. *********************************************************). HOLDSYSTEM(INT) = DOC ++ HOLD(UK24071) SYS FMID(JMK1012) REASON(DOC) DATE(07257) (DOCUMENTATION CHANGE FOR APAR PK41723 ZES

3 ZES Messages and Codes Volume 1: DFS messages DFS3498W message Add the following eeeeeeeeee... text ALREADY DEFINED AS TRANSACTION Issued when /MODIFY COMMIT or INITIATE OLC PHASE(COMMIT) detects that a transaction being added by online change was added as a CPIC transaction by the same name since prepare. Online Change proceeds in spite of this error. The transaction remains a CPIC transaction. If you prefer the MODBLKS definition, define the transaction again in the inactive MODBLKS dataset and do another online change.). HOLDSYSTEM(INT) = ENH ++ HOLD(UK25614) SYS FMID(JMK1012) REASON(ENH) DATE(07257) (********************************************************* APAR PK44137 adds new IMS function. Function name: Add USERID to audit trail See APAR closing text or PTF cover letter for complete details. *********************************************************). UK29441 TYPE = PTF DATE/TIME REC = :41:33 SOURCEID = PUT0709 RSU0712 SMCCOR PRE VER(001) = UK20125 UK20179 UK20559 UK23218 UK23225 UK23367 UK23666 UK23956 UK24024 UK24270 UK24280 UK24794 UK25384 UK25613 UK26478 UK26506 UK26660 UK26662 UK26828 UK26860 UK27893 UK28762 UK28855 SUPING VER(001) = DK47693 DK51149 UK27050 VK47693 MACUPD = DFSCMDRR MOD = DFSCRTU0 DFSORCT0 DFSPGS00 DFSTRS00 HOLDSYSTEM(INT) = DOC ++ HOLD(UK29441) SYS FMID(HMK1010) REASON(DOC) DATE(07263) (DOCUMENTATION CHANGE FOR APAR PK51149 SC COMMAND REFERENCE, VOLUME 1 CREATE PGM COMMAND Return and Reason codes for CREATE PGM table Add return code X' ' reason code X' ' to table The meaning is: "Multiple values specified for the same attribute are invalid. For example, BMPTYPE(Y) and BMPTYPE(N) may not both be specified This reason code is applicable only when you create a program by using the DFSINSX0 user exit." CREATE TRAN COMMAND Return and Reason codes for CREATE TRAN table Add return code X' ' reason code X' ' to table The meaning is: "Multiple values specified for the same attribute are invalid. For example, RESP(Y) and RESP(N) may not both be specified. This reason code is applicable only when you create a transaction using the DFSINSX0 user exit."). UK29802 TYPE STATUS = PTF = REC

4 DATE/TIME REC = :26:38 SOURCEID = HIPER PUT0710 RSU0711 SMCCOR PRE VER(001) = UK25613 SUPING VER(001) = DK48769 VK48769 MACUPD = DFSGST4P MOD = DFSCPDD0 DFSGST40 SRCUPD = DFSCPDD0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK29802) SYS FMID(HMK1010) REASON(DOC) DATE(07274) (DOCUMENTATION CHANGE FOR APAR PK48769 ZES Publications Change: The IMS Messages and codes manual ZES12909 must be changed to add the new message. The message text is included below: Message No.DFS3501W Message Text: GLOBAL STATUS NOT OBTAINED FOR xxxx RESOURCES ADDED WITH ONLINE CHANGE where xxxx is DB or TRAN Explanation: Online Change processing encountered an error trying to determine the global status for the added transaction or database resources. The added database or transaction status may be different from the status maintained in the RM resource structure. The online change added databases or transactions are available to be used without the global status from RM applied to the added database or transactions. Additional error information of any RM request error is available in the DFS3308 message along with the RM return/reason code. System action: The online change added databases or transactions are available to be used without the global status from RM applied to the added database or transactions. User Response: User will need to manually obtain any global status for the added transactions and database resources. A QRY TRAN SHOW(GLOBAL) or QRY DB SHOW(GLOBAL) may be issued to obtain the global status in RM. An UPD TRAN or UPD DB commands with SCOPE(ACTIVE) with the appropriate START or STOP may be issued to ensure IMS is in sync with RM global status. Module: DFSGST40). UK29803 TYPE = PTF DATE/TIME REC = :26:40 SOURCEID = HIPER PUT0710 RSU0711 SMCCOR FMID VER(001) = JMK1012 PRE VER(001) = UK29251 REQ VER(001) = UK29802 SUPING VER(001) = DK48769 VK48769 MOD = DFSCPSM0 SRCUPD = DFSCPSM0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK29803) SYS FMID(JMK1012) REASON(DOC) DATE(07274)

5 (DOCUMENTATION CHANGE FOR APAR PK48769 ZES Publications Change: The IMS Messages and codes manual ZES12909 must be changed to add the new message. The message text is included below: Message No.DFS3501W Message Text: GLOBAL STATUS NOT OBTAINED FOR xxxx RESOURCES ADDED WITH ONLINE CHANGE where xxxx is DB or TRAN Explanation: Online Change processing encountered an error trying to determine the global status for the added transaction or database resources. The added database or transaction status may be different from the status maintained in the RM resource structure. The online change added databases or transactions are available to be used without the global status from RM applied to the added database or transactions. Additional error information of any RM request error is available in the DFS3308 message along with the RM return/reason code. System action: The online change added databases or transactions are available to be used without the global status from RM applied to the added database or transactions. User Response: User will need to manually obtain any global status for the added transactions and database resources. A QRY TRAN SHOW(GLOBAL) or QRY DB SHOW(GLOBAL) may be issued to obtain the global status in RM. An UPD TRAN or UPD DB commands with SCOPE(ACTIVE) with the appropriate START or STOP may be issued to ensure IMS is in sync with RM global status. Module: DFSGST40). UK30581 TYPE = PTF DATE/TIME REC = :41:33 SOURCEID = PUT0711 SMCCOR PRE VER(001) = UK20559 UK23218 UK23225 UK23956 UK24183 UK24280 UK24794 UK25384 UK25613 UK26662 UK26860 UK27865 UK27893 UK29441 SUPING VER(001) = DK46282 MACUPD = DFSCMDRR DFSOLCD MOD = DFSOLC00 DFSOLC10 DFSOLC20 DFSORCT0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK30581) SYS FMID(HMK1010) REASON(DOC) DATE(07298) (DOCUMENTATION CHANGE FOR APAR PK46282 SC Publication change: IMS Command reference :SC The following return/reason code is to be added to the INIT OLC command :

6 Return code Reason code Explanation D The online change flavor is not applicable to all IMSs and a TERM OLC is required to cleanup the online change. Some examples are a TYPE(MODBLKS) OLC when all IMSs are DRD for MODBLKS enabled or a TYPE(FMTLIB) OLC when all IMSs are DBCTL.). UK30936 TYPE = PTF DATE/TIME REC = :41:33 SOURCEID = HIPER PUT0711 RSU0712 SMCCOR PRE VER(001) = UK20125 UK20177 UK20559 UK23218 UK23225 UK23367 UK23666 UK23956 UK24270 UK24280 UK24794 UK25384 UK25613 UK26478 UK26506 UK26660 UK26662 UK26828 UK26860 UK27893 UK28762 UK28855 UK29441 UK30581 SUPING VER(001) = DK53949 MACUPD = DFSCMDRR MOD = DFSCCTX0 DFSORCT0 DFSRTR20 DFSTRS00 HOLDSYSTEM(INT) = DOC ++ HOLD(UK30936) SYS FMID(HMK1010) REASON(DOC) DATE(07309) (DOCUMENTATION CHANGE FOR APAR PK53949 SC SC PK53949 DOC COMMAND REFERENCE Volume 1 SC CREATE TRAN Command Under the keyword CONV, say, "CONV(Y) and FP(E) are mutually exclusive". Under the keyword FP, say, "FP(E) and CONV(Y) are mutually exclusive." Under the keyword LCT, say, "The limit count value does not apply to FP exclusive transactions and is ignored." Under the keyword SPASZ, say, "SPASZ and FP(E) are mutually exclusive". Under the keyword SPATRUNC, say, "SPATRUNC and FP(E) are mutually exclusive". Add new reason code X' ' to the Return and Reason Codes table for CREATE TRAN command Return Code Reason Code Meaning X' ' X' ' Fast Path exclusive FP(E) is mutually exclusive with any conversation keyword, including CONV(Y), SPASZ, and SPATRUNC. A FP exclusive transaction can not be defined as conversational. COMMAND REFERENCE Volume 2 SC UPDATE TRAN Command Under the keyword CONV, say, "CONV(Y) and FP(E) are mutually exclusive".

7 Under the FP keyword say, "If a Fast Path exclusive FP(E)y transaction is being updated to Fast Path potential FP(P) or nonfast Path FP(N) transaction and no limit count is specified, a limit count of is set." Also say, "FP(E) and CONV(Y) are mutually exclusive." Under the keyword LCT, say, "The limit count value does not apply to FP exclusive transactions and is ignored." Under the keyword SPASZ, say, "SPASZ and FP(E) are mutually exclusive". Under the keyword SPATRUNC, say, "SPATRUNC and FP(E) are mutually exclusive". Add new completion code C' BF' to the "Completion Codes for the UPDATE TRAN command" table: Completion Completion Meaning Code Code Text Fast Path exclusive FP(E) is BF FP(E)/CONV mutually exclusive with any keyword conflict conversation keyword, including CONV(Y), SPASZ, and SPATRUNC. A FP exclusive transaction can not be defined as conversational.). UK31067 TYPE = PTF DATE/TIME REC = :41:34 SOURCEID = HIPER PUT0711 RSU0712 SMCCOR PRE VER(001) = UK20125 UK23225 UK23666 UK24270 UK24280 UK24759 UK25613 UK26478 UK26828 UK28855 UK29441 UK30936 SUPING VER(001) = DK46023 DK46058 DK47125 DK47849 DK51847 UK26660 UK27313 UK30877 UK30909 MOD = DBFRTS00 DFSDBS00 DFSPGS00 DFSTRS00 HOLDSYSTEM(INT) = DOC ++ HOLD(UK27313) SYS FMID(HMK1010) REASON(DOC) DATE(07313) (DOCUMENTATION CHANGE FOR APAR PK47849 COMMAND REFERENCE, VOLUME 1 ZES CHAPTER 19 CREATE DB COMMAND KEYWORD RESIDENT CHANGE THE PARAGRAPH FROM: A DATABASE DEFINED AS A DEDB IN ACBLIB ALWAYS SETS THE RESIDENT(Y) ATTRIBUTE WHEN THE DEDB IS LOADED, REGARDLESS OF THE RESIDENT VALUE SPECIFIED. RESIDENT(N) IS REJECTED FOR A DEDB. TO: A DATABASE DEFINED AS A DEDB OR AN MSDB IN ACBLIB ALWAYS SETS THE RESIDENT(Y) ATTRIBUTE, REGARDLESS OF THE RESIDENT VALUE SPECIFIED. TABLE 53. COMPLETION CODES FOR THE CREATE DB COMMAND.

8 REMOVE COMPLETION CODES 31 AND 32. '31 NOT ALLOWED FOR A DEDB' '32 NOT ALLOWED FOR AN MSDB'). HOLDSYSTEM(INT) = DOC ++ HOLD(UK30877) SYS FMID(HMK1010) REASON(DOC) DATE(07313) (DOCUMENTATION CHANGE FOR APAR PK46023 ZES The IMS V10 Command Reference, Volume 2 (ZES ) needs to be updated as follows: The following entry should be added to the completion code table for the UPDATE RTC command. Completion Completion Code Text Meaning Code 39 FP(E) TRAN FOR RTC EXISTS The routing code was created by IMS for a Fast Path exclusive transaction and cannot be updated with an UPDATE RTC command. The attributes of the routing code can only be updated with an UPDATE TRAN command for the Fast Path exclusive transaction. ). HOLDSYSTEM(INT) = DOC ++ HOLD(UK30909) SYS FMID(HMK1010) REASON(DOC) DATE(07313) (DOCUMENTATION CHANGE FOR APAR PK51847 SC COMMAND REFERENCE Volume 2 SC QRY PGM Command Table Reason Information for NOTINITxxreason status For INTLISTDB reason, add Action: 5. For NODMB reason, change Action to Action: 2 and/or 5. UK31573 TYPE = PTF DATE/TIME REC = :26:45 SOURCEID = PUT0711 SMCCOR Change action 5 to say, "Perform a MODBLKS online change or issue a CREATE DB command to create the database. Then issue an UPDATE PGM START(SCHD) command to reset the NOTINIT status. UPD PGM Command Under the keyword START, under SCHD, add the statement: "Or, resets the NOTINIT status if set because of an invalid database or DMB, in case the database or DMB has been created since the scheduling failure. If the database or DMB is still invalid when the program is next scheduled, the program will be marked with a status of NOTINIT again.").

9 PRE VER(001) = UK22037 UK23225 UK27777 UK27865 UK28762 UK29438 SUPING VER(001) = DK55025 MACUPD = DBFESCD MOD = DBFCDPL0 DBFINI20 DFSKEYT0 SRCUPD = DBFCDPL0 DBFINI20 DFSKEYT0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK31573) SYS FMID(HMK1010) REASON(DOC) DATE(07331) (DOCUMENTATION CHANGE FOR APAR PK55025 GC : System Definition Reference GC : Release Planning Guide GC : Messages and Codes Volume 1 GC : System Definition Reference DBBF parameter DBBF: Specifies the maximum number of fast path buffers. The storage is obtained as needed from the extended common storage area (ECSA) or from FDBR private storage, if FPBUFF=LOCAL (which is the default) is specified in the DFSFDRxx IMS.PROCLIB member. You might have to adjust the ECSA or region due to your requirements. If you do not specify a value for DBBF, IMS uses a default of 10 buffers. If you specify a value for DBBF, IMS overrides the default with your value and you must adjust for any change in DBFX specification. The maximum number of fastpath buffers differs based upon the buffer size (BSIZ) as follows: BSIZ (buffer size) maximum number of buffers 512 4,000,000 1,024 2,000,000 2,048 1,000,000 4, ,000 8, ,000 12, ,000 16, ,000 20, ,000 24,576 87,000 28,672 74,000 GC : Release Planning Guide Chapter 15. Fast Path serviceability and usability enhancements Impact to installing and defining IMS: IMS Version 10 increases the number of IMS Fast Path normal buffers (excluding shared VSO or Fast Path utility private buffers) that are available for an IMS subsystem beyond 65,535. The new maximum value depends upon the buffer size. For additional information on the maximum DBBF value see the write up on DBBF in the system Definition manual. Specify the number of FP buffers by specifying the DBBF keyword in the IMS, DBC, or FDR procedures.

10 GC : Messages and Codes Volume 1 (new message) DFS2708W NUMBER OF DATA BUFFERS EXCEEDED THE MAXIMUM ALLOWED FOR THE SPECIFIED BSIZ. DBBF HAS BEEN ADJUSTED. Explanation: The DBBF parameter in the IMS startup procedure exceeded the maximum value based upon BSIZ. DBBF is adjusted to the maximum allowed value for the specified BSIZ as specified in the following table: BSIZ (buffer size) maximum number of buffers 512 4,000,000 1,024 2,000,000 2,048 1,000,000 4, ,000 8, ,000 12, ,000 16, ,000 20, ,000 24,576 87,000 28,672 74,000 System action: IMS continues running. Programmer response: Correct the DBBF value in the IMS procedure.). UK32457 TYPE = PTF DATE/TIME REC = :41:34 SOURCEID = HIPER PUT0712 RSU0801 SMCCOR PRE VER(001) = UK20125 UK20140 UK20302 UK20559 UK20743 UK20776 UK23218 UK23225 UK23956 UK24183 UK24280 UK24541 UK24794 UK25384 UK25613 UK26662 UK26860 UK27509 UK27865 UK27893 UK29441 UK30137 UK30581 UK30936 UK31650 UK31740 SUPING VER(001) = DK44531 DK52493 UK29930 MACUPD = DFSCMDRR DFSMSWA DFSOLCD MOD = DFSCCTX0 DFSICV80 DFSICV90 DFSMOL30 DFSOLCS0 DFSOLC00 DFSOLC20 DFSORCT0 DFSRLP00 SRCUPD = DFSICV80 DFSICV90 DFSRLP00 HOLDSYSTEM(INT) = DOC ++ HOLD(UK32457) SYS FMID(HMK1010) REASON(DOC) DATE(07354) (DOCUMENTATION CHANGE FOR APAR PK44531 SC GC Publications Change: IMS Command Reference: Add the following completion codes and return codes for INITIATE OLC command: ReturnCode ReasonCode Explanation X' ' X' ' The PREPARE command cannot be processed as the OLCSTAT is locked. CC CCText Explanation

11 1D XRF Takeover is in Progress The OLC directive cannot be processed as a takeover is in progress. IMS Messages and Codes; GC Add the following new message: DFS2958A AN ONLINE CHANGE IN PROGRESS WAS DETECTED DURING TAKEOVER, ACTION IS REQUIRED TO COMPLETE THE OLC Explanation: This message is issued when the OLCSTAT is locked during an XRF takeover. The XRF takeover completes but the user must take action as listed in the user action section at the end of takeover. If a MODBLKS, FMTLIB or ACBLIB online change is in progress during takeover and the new active determines it is not in sync with the OLCSTAT, an internal online change is performed at the end of the takeover. A X'70' log record is written for this internal online change. If a ACBMBR online change is in progress during takeover, and the new active determines it is not in sync with the OLCSTAT, the UOW is committed at the end of takeover. The DFS3497I messages are issued with the status of the UOW. The X'7004' and X'7005' log records are written. User action: The following lists the user action required for the DFS2958A message: 1. User must issue a QUERY MEMBER TYPE(IMS) SHOW(ALL) or QUERY MEMBER TYPE(IMS) SHOW(STATUS) command and note the status of the IMSs in the IMSplex. 2. If the QUERY MEMBER TYPE(IMS) indicates that one or more IMSs in the IMSplex have the following status: No online change state OLCPREPC status OLCCMT1C state and OLCSTAT is not updated user must issue a TERMINATE OLC command to cleanup the online change in the IMSplex. If the user attemptes to complete the online change with another INIT OLC PHASE(COMMIT) command it will fail as the new active is not in an online change state. 3. If the QUERY MEMBER TYPE(IMS) indicates that one or more IMSs in the IMSplex have the following status: OLC COMMIT states of OLCCMT1C and OLCSTAT is updated OLCCMT2C state user must issue another INITIATE OLC PHASE(COMMIT) command to complete the online change in the IMSplex. This command must be routed to an IMS that has the OLCCMT1C or OLCCMT2C status. If the INITIATE OLC PHASE(COMMIT) is routed to the new active, it will fail as the new active is not in an online change state. If a TERMINATE OLC command is issued to terminate the OLC, it will fail as the online change is committed and the OLCSTAT is updated. MODULES: DFSOLCS0). UK32490 TYPE = PTF DATE/TIME REC = :41:34 SOURCEID = HIPER PUT0712 RSU0801 SMCCOR

12 PRE VER(001) = UK31067 UK31740 SUPING VER(001) = AK47262 DK47262 DK53907 DK56389 UK31277 UK32270 MOD = DFSDBS00 DFSOLC10 HOLDSYSTEM(INT) = DOC ++ HOLD(UK31277) SYS FMID(HMK1010) REASON(DOC) DATE(07353) (DOCUMENTATION CHANGE FOR APAR PK53907 SC Command reference Volume 1. SC The return and reason code table has an incorrect completion code for this error. It should be "FA" not "E3". The completion code text and meaning are correct. Change: Table 3. Return and reason codes for CREATE DB Completion Completion code text Code Meaning E3 AREA SIZE GREATER THAN BUFF SIZE... to: Table 3. Return and reason codes for CREATE DB Completion Completion code text Code Meaning FA AREA SIZE GREATER THAN BUFF SIZE...). UK32566 TYPE = PTF DATE/TIME REC = :41:13 SOURCEID = PUT0712 SMCCOR FMID VER(001) = JMK1012 PRE VER(001) = UK20178 UK27051 REQ VER(001) = UK29005 UK31750 SUPING VER(001) = DK51248 DK55514 UK29006 UK31771 VK51248 VK52110 VK55514 MOD = DFSCRPB0 SRCUPD = DFSCRPB0 HOLDSYSTEM(INT) = ACTION ++ HOLD(UK32566) SYS FMID(JMK1012) REASON(ACTION) DATE(07354) (++ + Hold for APAR PK Once PK52110 is applied, additional steps may be needed to ensure the limit counts defined for your Fast Path potential transactions are valid (valid values are from 1 to 65535). If a warm start or an emergency restart has been done since IMS was cold started from a MODBLKS data set, the limit counts for all Fast Path potential transactions may be zero, which is invalid. This applies to both DRD and nondrd enabled systems. Issue a QRY TRAN NAME() FP(P) SHOW(LCT) command or a /DISPLAY TRAN ALL command to find all the Fast Path potential transactions and their limit counts. If a Fast Path potential transaction has a limit count of zero, you should correct the limit count to a valid value.

13 To correct the limit counts of your Fast Path potential transactions, you can issue the UPDATE TRAN command, perform an online change, or cold start from MODBLKS. 1. If DRD is enabled, you can issue the UPD TRAN NAME() SET(LCT(xxx)) command to change the limit count (LCT) of a transaction. 2. If DRD for MODBLKS is not enabled, you can do a MODBLKS gen with valid limit count values specified on the TRANSACT macros for your Fast Path potential transactions and then do a MODBLKS online change. 3. If you are running without DRD enabled or with DRD enabled and you still have a MODBLKS data set that has been kept uptodate with your latest resource definitions, you can cold start IMS from the MODBLKS data set to pick up the correct definitions. If you are running with DRD enabled and you have automatic export and automatic import enabled (AUTOEXPORT=AUTO or AUTOEXPORT=RDDS and AUTOIMPORT=AUTO or AUTOIMPORT=RDDS specified in the DYNAMIC_RESOURCES section of your DFSDFxxx PROCLIB member) you will need to either scratch your RDDSs to force a cold start from MODBLKS, or specify AUTOIMPORT=MODBLKS in the DYNAMIC_RESOURCES section of your DFSDFxxx PROCLIB member. ++). UK32610 TYPE = PTF DATE/TIME REC = :41:35 SOURCEID = PUT0801 SMCCOR PRE VER(001) = UK20140 UK20185 UK20559 UK23225 UK23956 UK24280 UK25384 UK25613 UK26662 UK26860 UK27865 UK27893 UK28189 UK29441 UK30581 UK30936 UK31740 UK32457 UK32490 SUPING VER(001) = DK46654 MACUPD = DFSCMDRR MOD = DFSCCTX0 DFSOLC00 DFSOLC10 DFSOLC50 HOLDSYSTEM(INT) = DOC ++ HOLD(UK32610) SYS FMID(HMK1010) REASON(DOC) DATE(07363) (DOCUMENTATION CHANGE FOR APAR PK46654 SC Publications Change: The IMS Command Reference SC must be changed as follows under the INITIATE OLC command: For the INITIATE OLC command, add the following new completion code: CC CCText Meaning 5 OLC COMPLETE, The ACBMBR OLC is complete. SOME MBRS UNUSABLE However during COMMIT processing after the OLCSTAT is updated, an error was encountered and one or more members added, changed with the ACBMBR OLC are unusable. Any programs that are not usable are marked bad with a reason code of

14 MOLCCOMMIT. Any databases that are not usable are marked bad with a reason code of MOLCFAIL.). UK33102 TYPE = PTF DATE/TIME REC = :41:35 SOURCEID = HIPER SMCCOR PRE VER(001) = UK20140 UK20295 UK20302 UK24541 UK27865 UK30581 UK31650 UK31740 UK32490 UK32610 SUPING VER(001) = AK54205 DK38990 DK48693 DK50993 DK54205 UK24171 UK28019 UK29250 VK50993 MOD = DFSMOLS0 DFSMOL20 DFSOCMT0 DFSOLC10 DFSOLC40 DFSRMPS0 SRCUPD = DFSOCMT0 DFSRMPS0 HOLDSYSTEM(INT) = DOC ++ HOLD(UK33102) SYS FMID(HMK1010) REASON(DOC) DATE(08023) (DOCUMENTATION CHANGE FOR APAR PK54205 ========================================================== GC MESSAGES AND CODES VOLUME 1 DFS561A MESSAGE: DFS561A IS AN EXISTING ERROR MESSAGE. IT IS BEING ADDED TO THE LOCAL ONLINE CHANGE SCENARIO THAT GETS A READ ERROR TO THE ACBLIB. THE FORMAT OF THE MESSAGE DOES NOT CHANGE. THE MESSAGES AND CODES MANUAL NEEDS ADDITIONAL INFORMATION IN THE MESSAGE TO INDICATE THAT IT NOW IS ALSO ISSUED FROM THE ONLINE CHANGE CASE. THE FOLLOWING ADDITIONS ARE NEEDED TO THE FOLLOWING SECTIONS OF THE MESSAGE... EXPLANATION: THIS MESSAGE CAN ALSO BE ISSUED FROM AN ONLINE CHANGE PROCEDURE. IN CASE OF A READ ERROR TO THE ACBLIB DATASET, THE ONLINE CHANGE PROCESS IN ABORTED. THE USER MUST COMPLETE THE ONLINE CHANGE PROCEDURE BY ISSUING EITHER A TERM OLC OR A /MODIFY ABORT COMMAND. SYSTEM ACTION IF THIS MESSAGE IS RECEIVED DURING AN ONLINE CHANGE PROCEDURE, THE ONLINE CHANGE IS ABORTED. PROGRAMMER RESPONSE THE USER MUST COMPLETE THE ONLINE CHANGE PROCEDURE BY ISSUING EITHER A TERM OLC OR A /MODIFY ABORT COMMAND. MODULE DBFOLC01 DFS3497A MESSAGE: REMOVE THIS FORMAT FROM THE MESSAGE DFS3497A AND ADD THE FORMAT TO MESSAGE DFS3497I: MOLC 7002 LOG RECORD FOUND, UOW COMMITTED RSN=AAAAAAAA RC=BBBBBB TOKEN=CCCCCCCCCCCCCCCC). UK33103 TYPE = PTF

15 DATE/TIME REC = :41:08 SOURCEID = HIPER SMCCOR FMID VER(001) = JMK1011 REQ VER(001) = UK27510 UK33102 SUPING VER(001) = AK41021 AK43062 AK43787 AK46105 AK54205 DK41021 DK43062 DK46105 DK54205 UK24506 UK24951 UK27065 UK27511 MOD = DBFOLC01 HOLDSYSTEM(INT) = DOC ++ HOLD(UK33103) SYS FMID(JMK1011) REASON(DOC) DATE(08023) (DOCUMENTATION CHANGE FOR APAR PK54205 ========================================================== GC MESSAGES AND CODES VOLUME 1 DFS561A MESSAGE: DFS561A IS AN EXISTING ERROR MESSAGE. IT IS BEING ADDED TO THE LOCAL ONLINE CHANGE SCENARIO THAT GETS A READ ERROR TO THE ACBLIB. THE FORMAT OF THE MESSAGE DOES NOT CHANGE. THE MESSAGES AND CODES MANUAL NEEDS ADDITIONAL INFORMATION IN THE MESSAGE TO INDICATE THAT IT NOW IS ALSO ISSUED FROM THE ONLINE CHANGE CASE. THE FOLLOWING ADDITIONS ARE NEEDED TO THE FOLLOWING SECTIONS OF THE MESSAGE... EXPLANATION: THIS MESSAGE CAN ALSO BE ISSUED FROM AN ONLINE CHANGE PROCEDURE. IN CASE OF A READ ERROR TO THE ACBLIB DATASET, THE ONLINE CHANGE PROCESS IN ABORTED. THE USER MUST COMPLETE THE ONLINE CHANGE PROCEDURE BY ISSUING EITHER A TERM OLC OR A /MODIFY ABORT COMMAND. SYSTEM ACTION IF THIS MESSAGE IS RECEIVED DURING AN ONLINE CHANGE PROCEDURE, THE ONLINE CHANGE IS ABORTED. PROGRAMMER RESPONSE THE USER MUST COMPLETE THE ONLINE CHANGE PROCEDURE BY ISSUING EITHER A TERM OLC OR A /MODIFY ABORT COMMAND. MODULE DBFOLC01 DFS3497A MESSAGE: REMOVE THIS FORMAT FROM THE MESSAGE DFS3497A AND ADD THE FORMAT TO MESSAGE DFS3497I: MOLC 7002 LOG RECORD FOUND, UOW COMMITTED RSN=AAAAAAAA RC=BBBBBB TOKEN=CCCCCCCCCCCCCCCC).