************************************************************************

Transcription

1 HOLDDATA FOR IMS 10.1 PUT Level 0906 ** Please read all of the HOLDDATA before acting on any of it. ** ******* Please pay close attention to the holddata for the following PTFs with action items. 82 PTFs were applied follow instructions below for actions to take. 1. UK46601: This APAR changes the default for PSWDC startup parm from "U" to "R". "R" will tell IMS to use the current RACF mixed password rules. If RACF is not active in IMS then it might be necessary to change PSWDC to "U" to make sure that passwords get translated to upper case before they get passed to user exits. If this causes you problems, add the PSWDC=U keyword in a customized copy of the DFSPBxxx IMS1010.PROCLIB member used for IMS startup. ********** HOLDDATA **************************************************** SMP/E HOLDDATA Report JES Node: SVSCJES2 PTF Detail Report Date: Jul 28, 2009 System: S0W1 Time: 08:54:33 * The following PTFs have HOLD Reason: ACTION * UK47192 Jul 27, :34 Jul 27, :32 UK47192 HMK HOLD(UK47192) SYS FMID(HMK1010) REASON(ACTION) DATE(09155) (*************************************************************** PK87013 *************************************************************** If OTMA C/I (Callable Interface) is being used, then after applying this maintenance, stand*alone program DFSYSVI0 must be run to re*initialize OTMA C/I. OTMA C/I is separate from IMS, even though the modules reside in the IMS reslib. DFSYSVI0 initializes OTMA C/I by loading DFSYSVC0 into storage and registering it with BPE. Typically, DFSYSVI0 only needs to be run after an IPL. However, whenever DFSYSVC0 is changed via an apar, DFSYSVI0 needs to be run to pick up the changes. If OTMA C/I is not being used, then DFSYSVI0 does not need to be run. **************************************************************).

2 UK46602 Jun 15, :54 Jul 27, :32 UK46602 JMK HOLD(UK46602) SYS FMID(JMK1012) REASON(ACTION) DATE(09134) (++ + Hold for APAR PK This APAR changes the default for PSWDC startup parm from + + "U" to "R". "R" will tell IMS to use the current RACF mixed + + password rules. If RACF is not active in IMS then it might + + be necessary to change PSWDC to "U" to make sure that + + passwords get translated to upper case before they get + + passed to user exits. + ++). UK46601 Jun 15, :54 Jul 27, :32 UK46601 HMK HOLD(UK46601) SYS FMID(HMK1010) REASON(ACTION) DATE(09134) (++ + Hold for APAR PK This APAR changes the default for PSWDC startup parm from + + "U" to "R". "R" will tell IMS to use the current RACF mixed + + password rules. If RACF is not active in IMS then it might + + be necessary to change PSWDC to "U" to make sure that + + passwords get translated to upper case before they get + + passed to user exits. + ++). UK45497 May 19, :44 Jul 27, :32 UK45497 HMK HOLD(UK45497) SYS FMID(HMK1010) REASON(ACTION) DATE(09093) (++ + Hold for APAR PK PRIOR TO INSTALLING THIS FIX IT IS IMPORTANT THAT THERE ARE + + NO ONLINE IMAGE COPY JOBS THAT HAVE NOT COMPLETED, I.E. NO + + ONLINE IMAGE COPY JOBS NEED TO BE RESTARTED AND NO ONLINE + + IMAGE COPY JOBS ARE CURRENTLY EXECUTING IN AN XRF ENVIRONMENT THE FIX MUST BE INSTALLED ON BOTH THE + + ACTIVE AND THE ALTERNATE SYSTEMS AT THE SAME TIME FAILURE TO DO THIS CAN RESULT IN MESSAGES AND ABENDS DUE TO + + DBRC SIGNON FAILURES. + + THIS CAN OCCUR BECAUSE PRIOR TO THE FIX THE ONLINE IMAGE COPY+ + SUBSYSTEM ID IS CALCULATED ONE WAY AND AFTER THE FIX IT IS + + CALCULATED A DIFFERENT WAY. + ++).

3 UK46919 Jun 15, :54 Jul 27, :31 UK46919 HMK HOLD(UK46919) SYS FMID(HMK1010) REASON(ACTION) DATE(09146) (++ + Hold for APAR PK IF IMS CONNECT, ASYNCHRONOUS, AND SYNCHRONOUS CALLOUT ARE NOT+ + BEING TESTED IN IVP THE REST OF THIS HOLD CAN BE IGNORED AFTER THIS SERVICE HAS BEEN PROCESSED VIA SMP/E, TO TAKE + + ADVANTAGE OF THIS SERVICE, THE NEXT TIME YOU USE THE IMS IVP + + YOU MUST: RERUN JOB IV_E206J ). SMP/E HOLDDATA Report JES Node: SVSCJES2 PTF Detail Report Date: Jul 28, 2009 System: S0W1 Time: 08:54:33 * The following PTFs have HOLD Reason: AO * UK46417 Jun 15, :54 Jul 27, :32 UK46417 HIR HOLD(UK46417) SYS FMID(HIR2220) REASON(AO) DATE(09131) (*************************************************************** PK65904 *************************************************************** This APAR changes or affects an IMS message. IRLM Message number: DXR179I Any user exits or nonibm vendor software which are sensitive to this message may need to be changed. See the APAR closing text or PTF cover letter for complete details Message DXR179I is issued as a result of a IRLM Modify STATUS STATUS,TRACE command output: F irlmproc,status,trace DXR179I IRLM001 TRACE USAGE TRACE BUFFER STORAGE IN USE: 64KB MAXIMUM NUMBER OF TRACE BUFFERS ALLOWED PER TRACE TYPE: 10 TRACE TYPE ACTIVE BUFFERS IN USE CTRACE WRITER

4 ... >> RLE Y 0 N DXR179I End of display Under the "TRACE TYPE" column, a new line for trace type "RLE" is shown now along with other internal IRLM trace types. RLE Traces interactions between MVS and IRLM specific to Record List Entries. ***************************************************************). UK46214 May 19, :44 Jul 27, :32 UK46214 HMK HOLD(UK46214) SYS FMID(HMK1010) REASON(AO) DATE(09120) (*************************************************************** PK82163 *************************************************************** This APAR changes an output line for a /DISPLAY command. Command: /DISPLAY The VRDS and FOUND total stats fields will display 'OVERFLOW' or 'OVFLO' if the number overflows a 4byte field (i.e. number greater than 4,294,967,295). Any user exits or nonibm vendor software which is sensitive to this message may need to be changed. See APAR closing text or PTF cover letter for complete details. ***************************************************************). SMP/E HOLDDATA Report JES Node: SVSCJES2 PTF Detail Report Date: Jul 28, 2009 System: S0W1 Time: 08:54:33 * The following PTFs have HOLD Reason: DEP * UK45829 May 19, :44 Jul 27, :32 UK45829 HMK HOLD(UK45829) SYS FMID(HMK1010) REASON(DEP) DATE(09106) (++ + This hold card is only applicable to Database Recovery + + Facility ( DRF ) version 3 Release 1 users. + + Comp ID: 5655I DRF APAR PK82464 must be installed along with this service. + ++).

5 UK45809 May 19, :44 Jul 27, :32 UK45809 HMK HOLD(UK45809) SYS FMID(HMK1010) REASON(DEP) DATE(09105) (This APAR is dependent on z/os APARs OA26817 and OA26820 to be fully effective. This IMS APAR can be installed without the z/os APARs. The z/os APARs can be installed without this IMS APAR. However, until all three APARs are installed, the IMS APAR is not fully effective, and the original symptom (WTO message flood) may still occur.). SMP/E HOLDDATA Report JES Node: SVSCJES2 PTF Detail Report Date: Jul 28, 2009 System: S0W1 Time: 08:54:33 * The following PTFs have HOLD Reason: DOC * UK47604 Jul 27, :34 Jul 27, :32 UK47604 HMK HOLD(UK47604) SYS FMID(HMK1010) REASON(DOC) DATE(09170) (DOCUMENTATION CHANGE FOR APAR PK73527 GC THE V10 SYSTEM DEFINITION REFERENCE MANUAL NEEDS TO BE CORRECTED (GC ) MAXSIZE IS A SUBKEYWORD IN THE TCPIP GROUP, NOT IN THE HWS GROU * THE SYNTAX DIAGRAM NEEDS TO BE CORRECTED TO PLACE MAXSIZE UNDE THE TCPIP SECTION. * THE MAXSIZE DESCRIPTION NEEDS TO BE MOVED TO THE TCPIP SECTION). UK47192 Jul 27, :34 Jul 27, :32 UK47192 HMK HOLD(UK47192) SYS FMID(HMK1010) REASON(DOC) DATE(09155) (DOCUMENTATION CHANGE FOR APAR PK87013 GC

6 Messages and Codes Reference, Volume 4: IMS Component Code GC Chapter 14. OTMA Codes Codes Used by OTMA C/I Table 112. OTMA C/I Return Codes and Reason Codes by Function Add the following table entry for SEND ASYNC Return Code = 08 Reason 1 = 76 Reason 2 = 0 Reason 3 = 0 Reason 4 = 10 Description: Duplicate send call has been issued. Send already in progress.). UK46602 Jun 15, :54 Jul 27, :32 UK46602 JMK HOLD(UK46602) SYS FMID(JMK1012) REASON(DOC) DATE(09134) (DOCUMENTATION CHANGE FOR APAR PK80028 GC System Definition Guide Add R to the PSWDC startup parm with following descripton: R will use RACF mixed case passwords when it gets activated in RACF using the SETROPTS command. This is the default.). UK46601 Jun 15, :54 Jul 27, :32 UK46601 HMK HOLD(UK46601) SYS FMID(HMK1010) REASON(DOC) DATE(09134) (DOCUMENTATION CHANGE FOR APAR PK80028 GC System Definition Guide Add R to the PSWDC startup parm with following descripton: R will use RACF mixed case passwords when it gets activated in RACF using the SETROPTS command. This is the default.).

7 UK46601 Jun 15, :54 Jul 27, :32 UK43819 HMK HOLD(UK43819) SYS FMID(HMK1010) REASON(DOC) DATE(09134) (DOCUMENTATION CHANGE FOR APAR PK78241 GC Messages and Codes Vol 1 manual ( GC ) will be changed for message DFS3213I reason code 04 to add: 04 The Partner ID specified does not exist on this system or the logical link for NODENAME = nodename could not be found.). UK46400 Jun 15, :54 Jul 27, :32 UK46400 HMK HOLD(UK46400) SYS FMID(HMK1010) REASON(DOC) DATE(09128) (DOCUMENTATION CHANGE FOR APAR PK74916 SC IMS V10 System Programming API Reference Chapter Return and reason codes for CQSREG Table 22. CQSREG return and reason codes Add a new row in the table 22: Return code Reason code Meaning X' ' X' C' Unable to load CQS registration module CQSREG00. Chapter Return and reason codes for CQSDEREG Table 13. CQSDEREG return and reason codes Add a new row in the table 22: Return code Reason code Meaning X' ' X' C' Unable to load CQS deregistration module CQSREG10.). UK46393 Jun 15, :54 Jul 27, :32 UK46393 HMK1010

8 ++ HOLD(UK46393) SYS FMID(HMK1010) REASON(DOC) DATE(09128) (DOCUMENTATION CHANGE FOR APAR PK51848 SC IMS V10 Operations and Automation Guide needs to be updated. Add the following to chapter "Viewing the OM audit trail log using TSO SPOC": Find function has been implemented in TSO SPOC audit trail panel. There are 2 methods to start searching: * Type FIND on the command line * Select Find... in action bar View menu A popup panel will prompt for the search string. Enter the search string to find it in audit trail log. To find the string again, press PF5 or type RFIND on the command line.). UK46214 May 19, :44 Jul 27, :32 UK46214 HMK HOLD(UK46214) SYS FMID(HMK1010) REASON(DOC) DATE(09120) (DOCUMENTATION CHANGE FOR APAR PK82163 SC IMS V10 Commands Reference (SC ) will be updated. In Chapter 26 /DISPLAY command, section /DISPLAY POOL, under section VSAM Buffer Subpool, add the text in parenthesis for VRDS and FOUND stats fields: VRDS Number of VSAM control interval reads (OVFLO indicates the total overflowed a 4byte field, i.e. exceeded 4,294,967,295) FOUND Number of control intervals VSAM found in the subpool through lookaside (OVFLO indicates the total overflowed a 4byte field, i.e. exceeded 4,294,967,295) In Chapter 26 /DISPLAY command, section /DISPLAY POOL, under section Enhanced VSAM Buffer Subpool, add the text in parenthesis for VRDS and FOUND stats fields:

9 VRDS Number of VSAM control interval reads (OVERFLOW indicates the total overflowed a 4byte field, i.e. exceeded 4,294,967,295) FOUND Number of control intervals VSAM found in the subpool through lookaside (OVERFLOW indicates the total overflowed a 4byte field, i.e. exceeded 4,294,967,295)). UK45809 May 19, :44 Jul 27, :32 UK45809 HMK HOLD(UK45809) SYS FMID(HMK1010) REASON(DOC) DATE(09105) (DOCUMENTATION CHANGE FOR APAR PK81455 GC In the IMS Messages and Codes Reference, Volume 2: NonDFS Messages manual (GC189713), Chapter 3 "CQS Messages", MSGCQS0350W, add the following new reason: CQS LOG FULL, OFFLOAD ERRORS DIAG=diag1 diag2 diag3 CQS received return code X' ' and reason code X' D' from a System Logger write request (IXGWRITE). The system logger CF structure or staging data set space is full, and the logger has encountered severe errors attempting to offload data. In the message text: diag1 Diagnostic data from field Ansaa_Diag1 in the answer area returned on the IXGWRITE request. diag2 Diagnostic data from field Ansaa_Diag2 in the answer area returned on the IXGWRITE request. diag3 Diagnostic data from field Ansaa_Diag3 in the answer area returned on the IXGWRITE request. Update the existing reason description for LOG STREAM IS NOT AVAILABLE DIAG=diag1 diag2 diag3 to read: In the message text: diag1 A 4byte value in field IxgenfEvents of IXGENF DSECT, or a 4byte value in field Ansaa_Diag1. diag2 A 4byte value in field IxgenfEventReasons of IXGENF DSECT, or a 4byte value in field Ansaa_Diag2. diag3 A 4byte value in field IxgenfEventSpecificInfo of IXGENF DSECT, or a 4byte value in field Ansaa_Diag3. Add the following under System Action:

10 CQS LOG FULL, OFFLOAD ERRORS When this error occurs, CQS waits for the system logger to notify CQS that the log stream is available again. CQS is not able to process any work for this structure until the system logger is able to successfully offload from interim storage. Any CQS requests that require logging will be suspended within CQS until the log stream is available again. The CQS structure event client exit is driven for "log stream unavailable" (SEVX_STRFLOG). Add the following under System Programmer Response: CQS LOG FULL, OFFLOAD ERRORS Check the console log for message IXG301I to determine the cause of the system logger offload error. The logger offload error must be corrected before CQS can process any further work for the structure associated with the failing logstream. Once the logger can successfully offload, it will notify CQS and CQS processing will resume.). UK45809 May 19, :44 Jul 27, :32 UK41504 HMK HOLD(UK41504) SYS FMID(HMK1010) REASON(DOC) DATE(09105) (DOCUMENTATION CHANGE FOR APAR PK72843 GC Documentation Change: IMS Messages and Codes Volume 2 Version 10 (GC ) Chapter 3. CQS messages (Common Queue Server) Section 3.62 CQS0350W This APAR adds new Reason, System Action, and System Programmer Response to the current CQS0350W message. Suggest adding the following paragraphs under the current 'CQS LOG WRITE PREVIOUS OFFLOAD ERROR' section. New Reason: CQS LOG WRITE UNABLE TO DUPLEX LOG DATA TO STAGING DATA SETS CQS received return code X' ' and reason code X' A' from a System Logger write request (IXGWRITE). The logger write request was successful; however, the logger was not able to duplex the log data to staging data sets. New System action: CQS LOG WRITE UNABLE TO DUPLEX LOG DATA TO STAGING DATA SETS When this error occurs, CQS writes the highlighted CQS0350W message to operator console, and processing continues. CQS

11 processing continues; however, the CQS logstream is not duplexed to staging data sets. New System Programmer Response: CQS LOG WRITE UNABLE TO DUPLEX LOG DATA TO STAGING DATA SETS CQS will continue processing without the staging data sets. If staging data set duplexing is required, determine the cause and fix the problem with the logger staging data sets.). UK45696 May 19, :44 Jul 27, :32 UK45696 HMK HOLD(UK45696) SYS FMID(HMK1010) REASON(DOC) DATE(09100) (DOCUMENTATION CHANGE FOR APAR PK78337 The IMS V10 Command Reference, Volume 1 (SC ) manual needs to be updated to indicate that customers can now use DRD UI support to issue Export / Import commands. The IMS V10 Messages and Codes, Volume 4 (ZES ) CSLM messages manual needs to be updated to include the following new message: CSLM141E CSLM141E You entered an invalid value for TYPE. Explanation: You entered an invalid value for TYPE. System Action: The system waits for the value to be changed. Programmer Response: Make sure that you have entered valid type in the TYPE field. To see what values for TYPE are valid, view the Help (PF1) for the TYPE field. Change the field to have a valid value and press Enter to continue. Module: DFSSPOC The IMS V10 Operations and automation manual (SC ) needs to indicate customers can now use DRD UI support to Export / Import IMS resources. The IMS V10 System definition manual (GC ) needs to indicate customers can now use DRD UI support to Export / Import IMS resources.). UK45497 May 19, :44 Jul 27, :32 UK45495 HMK HOLD(UK45495) SYS FMID(HMK1010) REASON(DOC) DATE(09093) (DOCUMENTATION CHANGE FOR APAR PK52049

12 GC Add the following to DFS049I, at the end of the System action section: In the case of command processing such as a /START DB command, there's no PSB and no U0047 abend will be issued. If the failure occurs during restart with indoubts then abend U0484 will be issued.). UK45392 May 19, :44 Jul 27, :32 UK44636 HMK HOLD(UK44636) SYS FMID(HMK1010) REASON(DOC) DATE(09096) (DOCUMENTATION CHANGE FOR APAR PK74033 SC Documentation Change: IMS V10 Command Reference, Volume 2 SRL# SC The IMS v10 Command Reference, Volume 2, Chapter 8, "QUERY Commands" in the section labeled "QUERY PGM Command" under "Examples". In the example OM API Output change: <hdr slbl="tls" llbl="transtat" scope="lcl" sort="n" key="0" scr es" len="1" dtype="char" align="left" /> to: <hdr slbl="tls" llbl="transtat" scope="lcl" sort="n" key="0" scr es" len="1" dtype="char" align="left" /> The IMS v10 Command Reference, Volume 2, Chapter 8, "QUERY Commands" in the section labeled "QUERY TRAN Command" under "Examples". In the example OM API Output change: <hdr slbl="tls" llbl="transtat" scope="lcl" sort="n" key="0" scr es" len="1" dtype="char" align="left" /> to: <hdr slbl="tls" llbl="transtat" scope="lcl" sort="n" key="0" scr es" len="1" dtype="char" align="left" />). UK45392 May 19, :44 Jul 27, :32 UK45392 HMK1010

13 ++ HOLD(UK45392) SYS FMID(HMK1010) REASON(DOC) DATE(09096) (DOCUMENTATION CHANGE FOR APAR PK71928 SC SC :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Documentation Change: IMS V10 Command Reference, Volume 1 SRL# SC The IMS v10 Command Reference, Volume 1, Chapter 1, "IMS command language overview" in the section labeled "Commands supported on the XRF alternate", Table 11, "List of commands supported on the XRF alternate": Command QUERY DB QUERY PGM QUERY RTC QUERY TRAN Exceptions Keyword/filter SHOW(WORK) Keyword/filter SHOW(WORK) Keyword/filter SHOW(WORK) Keyword/filter SHOW(WORK) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Documentation Change: IMS V10 Command Reference, Volume 2 SRL# SC The IMS v10 Command Reference, Volume 2, Chapter 7, "QUERY commands"... QUERY DB command: Under "Keywords", "SHOW()", after the last paragraph of subsection "WORK" add: Note: QRY DB SHOW(WORK) is not valid on an XRF alternate. QUERY PGM command: Under "Keywords", "SHOW", subsection "WORK", "Notes:" add: 3. QRY PGM SHOW(WORK) is not valid on an XRF alternate. QUERY RTC command: Under "Keywords", "SHOW", after the last paragraph of subsection "WORK" add: Note: QRY RTC SHOW(WORK) is not valid on an XRF alternate. QUERY TRAN command: Under "Keywords", "SHOW()", after the last paragraph of subsection "WORK" change: Note: SHOW(WORK) specified with NAME(*) might have a performance impact on the processing of the command.

14 to the following... Notes: 1. SHOW(WORK) specified with NAME(*) might have a performance impact on the processing of the command. 2. QRY TRAN SHOW(WORK) is not valid on an XRF alternate.). UK45392 May 19, :44 Jul 27, :32 UK45521 HMK HOLD(UK45521) SYS FMID(HMK1010) REASON(DOC) DATE(09096) ( Documentation Change: IMS V10 Command Reference, Volume 2 SRL# SC First change The IMS v10 Command Reference, Volume 2, Chapter 7, "QUERY Commands" in the section labeled "QUERY DB command", "KEYWORDS", keyword "SHOW()" and value "WORK", the third paragraph: The QRY DB SHOW(WORK) command will not show the area names if the database is a DEDB or the partition names if the database is a HALDB master. Remove the phrase "the area names if the database is a DEDB or". The corrected paragraph will then read: The QRY DB SHOW(WORK) command will not show the partition names if the database is a HALDB master. Second change The IMS v10 Command Reference, Volume 2, Chapter 7, "QUERY Commands", Table 21 "Output fields for QUERY DB command". The last entry in Table 21, "Short label/long label" with values "WRK/Work" and column KEYWORD "WORK" delete the following: AREA STARTED Area associated with the FP DEDB is started. ANOTHER CMD IN PROGRESS Another command (such as DELETE or UPDATE) to delete or update the database is already in progress. DEDB STOP IN PROGRESS A /DBRECOVERY, /STOP, UPDATE DB STOP(ACCESS) or UPDATE DB STOP(SCHD)

15 command to stop database scheduling is in progress for a DEDB DEPENDENT REGIONS ACTIVE Fast Path DEDB has dependent regions active. PROGRAM SCHEDULED Program referencing the database is scheduled. TRAN SCHEDULED Transaction or application program referencing the database is scheduled.). UK32174 Jul 27, :23 Jul 27, :32 UK32174 HMK HOLD(UK32174) SYS FMID(HMK1010) REASON(DOC) DATE(07346) (DOCUMENTATION CHANGE FOR APAR PK52634 SC ******************* PUBS CHANGES ***************************** SC Book: IMS Exit Routine Reference The following changes apply to Resource Access Security Exit Routine (DFSRAS00) section. Add the following three fields to the FunctionSpecific Parameter List Mapped by DFSRASL table. RASLPSB2 offset=120 length=8 desc=if not PSB auth, contains PSB name for a BMP/JBP with OUT= specified or a MDBMP Field exists only if RASLVER=2 or greater. RASLTRAN2 offset=128 length=8 desc=if PSB auth, contains Trancode for a BMP/JBP with OUT= specified or a MDBMP Field exists only if RASLVER=2 or greater. RASLLTRM2 offset=136 length=8 desc=if PSB auth, contains Lterm name for a BMP/JBP with OUT= specified Field exists only if RASLVER=2 or greater. Add the following as note #2.

16 If RASLVER=2 or greater, RASLFUNC=4 or 6, and RASLTRAN is non zero, then RASLPSB2 contains the PSB name. If RASLVER=2 or greater, RASLFUNC=5, and RASLLTRM is nonzero then RASLPSB2 contains the PSB name. If RASLVER=2 or greater, RASLFUNC=4 or 6, and RASLPSB is nonzero, then RASLTRAN2 contains the Trancode If RASLVER=2 or greater, RASLFUNC=5, and RASLPSB is nonzero, then RASLLTRM2 contains the LTERM name). UK47628 Jul 27, :34 Jul 27, :31 UK47628 HMK HOLD(UK47628) SYS FMID(HMK1010) REASON(DOC) DATE(09175) (DOCUMENTATION CHANGE FOR APAR PK80298 GC **************************************************************** * DOCUMENTATION CHANGE * **************************************************************** In the IMS V10 System Definition Reference manual (GC189966), the following change is being made: Member DFSPBxxx It currently states: The DFSPBxxx member consists of one or more 80character records. Only characters 171 are used as input. Data in characters 7280 will be ignored. It is changed to state: The DFSPBxxx member consists of one or more 80character records. Only characters 171 are used as input. Data in characters 7280 will be ignored. All parameters on each line must be complete, no continuation onto the next line to complete a parameter keyword or value.). SMP/E HOLDDATA Report JES Node: SVSCJES2 PTF Detail Report Date: Jul 28, 2009 System: S0W1 Time: 08:54:33

17 * The following PTFs have HOLD Reason: ENH * UK46660 Jun 15, :54 Jul 27, :32 UK45299 HMK HOLD(UK45299) SYS FMID(HMK1010) REASON(ENH) DATE(09135) (*************************************************************** PK67383 *************************************************************** Function name: This service adds the DBRC support for the new DRF functions to recover using just the last batch type image copy or the latest PITCA. See APAR PK67379 for information about these new functions. See APAR closing text or PTF cover letter for complete details. ***************************************************************). UK46602 Jun 15, :54 Jul 27, :32 UK46602 JMK HOLD(UK46602) SYS FMID(JMK1012) REASON(ENH) DATE(09134) (********************************************************* APAR PK80028 adds new IMS function. Function name: Enhancement to RACF mixed case passwords. See APAR closing text or PTF cover letter for complete details. *********************************************************). UK46601 Jun 15, :54 Jul 27, :32 UK46601 HMK HOLD(UK46601) SYS FMID(HMK1010) REASON(ENH) DATE(09134) (********************************************************* APAR PK80028 adds new IMS function. Function name: Enhancement to RACF mixed case passwords. See APAR closing text or PTF cover letter for complete details. *********************************************************). UK46393 Jun 15, :54 Jul 27, :32 UK46393 HMK1010

18 ++ HOLD(UK46393) SYS FMID(HMK1010) REASON(ENH) DATE(09128) (*************************************************************** PK51848 *************************************************************** ADDs Find... feature in TSO SPOC audit trail log. Function name: Find string in TSO SPOC audit trail log. See APAR closing text or PTF cover letter for complete details. ***************************************************************). UK45696 May 19, :44 Jul 27, :32 UK45696 HMK HOLD(UK45696) SYS FMID(HMK1010) REASON(ENH) DATE(09100) (********************************************************* APAR PK78337 ADDS NEW IMS FUNCTION. FUNCTION NAME: DRD UI support for Export/Import commands SEE APAR CLOSING TEXT OR PTF COVER LETTER FOR COMPLETE DETAILS. *********************************************************). UK46926 Jun 15, :54 Jul 27, :31 UK46926 HMK HOLD(UK46926) SYS FMID(HMK1010) REASON(ENH) DATE(09146) (********************************************************* APAR PK82560 adds new IMS function. Function name: User State Data added to IXCJOIN request during FDBR region initialization. See APAR closing text or PTF cover letter for complete details. *********************************************************). SMP/E HOLDDATA Report JES Node: SVSCJES2 PTF Detail Report Date: Jul 28, 2009 System: S0W1 Time: 08:54:33 * The following PTFs have HOLD Reason: EXRF * UK46206 May 19, :44 Jul 27, :32 UK46206 HMK1010

19 ++ HOLD(UK46206) SYS FMID(HMK1010) REASON(EXRF) DATE(09121) (*************************************************************** PK75652 *************************************************************** WARNING: IF THIS IS AN ''XRF'' ENVIRONMENT, THIS * * * MAINTENANCE MUST BE APPLIED TO ALL SYSTEMS IN THIS ENVIRONMENT AT THE SAME TIME. NOTE: THE ABOVE IS TRUE ONLY IF THE DATABASE / DATA SETS ARE /DBR'ed ON THE ACTIVE IMS PRIOR TO THE TAKEOVER. IF THE DATABASE / DATA SETS ARE OPEN ON THE ACTIVE IMS BEFORE THE TAKEOVER THIS PROBLEM WILL NOT OCCUR. ***************************************************************). UK45497 May 19, :44 Jul 27, :32 UK45497 HMK HOLD(UK45497) SYS FMID(HMK1010) REASON(EXRF) DATE(09093) (*************************************************************** PK72147 *************************************************************** WARNING: IF THIS IS AN ''XRF'' ENVIRONMENT, THIS * * * MAINTENANCE MUST BE APPLIED TO ALL SYSTEMS IN THIS ENVIRONMENT AT THE SAME TIME. ***************************************************************)