MACHINERY RAISER DAMPING BLOCKS
|
|
- Emil Franklin
- 6 years ago
- Views:
Transcription
1
2 DYNEMEC INSULATION PLATES WEDGE-MOUNTS WEDGE-MOUNTS Series DLT For Machines with thru ole in the Base. For Machines with Tapped ole in the Base/ygienic Stainless Steel Mounts. To Accommodate uneven/slopped surface in Steel and Stainless Steel. For Machines requiring Anchoring along with Leveling. AIR SPRINGS MACINERY RAISER DAMPING BLOCKS Series DRAS Series DR For Low Frequency Vibration Damping of EDM Machines. Measuring and Testing Instruments. For Raising eight of the Machines, besides Vibration Damping and having Tapped ole in Base. COMPRESSION/SEAR MOUNTS COMPAC MACINERY MOUNTS For Small Machines.
3 ADVANTAGES 3
4 4
5 Machine Base Anti Skid Plate Concrete Floor Damping Plate Insulating Disc Machine Base Machine Base Anti Skid Plate Concrete Floor Damping Plate Anti Skid Plate Damping Plate Anchor Nut Concrete Floor 5
6 L B
7 WEDGE MOUNTS, Series DB (BOLT ON) and Series DBP L e e B d 7
8 WEDGE MOUNTS, Series DT (BOLT Thru) and Series DTP L e e B d 8
9 7 9
10 SCREW SUPPORT MOUNTS, Series DLC DØ DØ 10
11 D Bolt Anchored to The Floor Bolt ead Insulation Disc Machine Base Bolt of Machine Foot DLT MOUNTS GROUND LEVEL eavy Duty Floor Nut 11
12 SCREW SUPPORT MOUNTS, Series DLK Dynemech Screw Support Mounts Series DLK are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer both low frequency attenuation and stable machine levelling. DLK series mounts has steel body and are used for machines having mounting holes in the base. This mount has a cover plate and dimpled bottom plate holding the insulation plate. Leveling is done by tightening the bolt which lifts the cover plate with the machine Applications Ÿ Textile Machines, CNC Machines, Ÿ Ÿ Ÿ Ÿ Power Presses Plastic Injection Moulding Machines. Pressure Die Casting Machines. Printing and Textile Machines etc. Compressors, Grinding Machines Model Load Kg/pc Bolt Size D (mm) (mm) Adj. range (mm) DLK1-a DLK1-b DLK1-c DLK2-a DLK2-b DLK2-c DLK3-a DLK3-b DLK3-c M12 x 100 M12 x 100 M12 x 100 M16 x 100 M16 x 100 M16 x 100 M20 x 150 M20 x 150 M20 x Advantages of Dynemech DLK Mounts Ÿ Different products/customized solutions Ÿ Ÿ Ÿ Ÿ Ÿ available. Simple integration into the production plant due to flexible installation. Significantly increased productivity without higher breakdown risk Extended Tool And Machinery Life. Better Structural Safety. igh precision levelling and accurate alignment Fig 1: Textile Machine on Dynemech DLK Mounts 12
13 SCREW SUPPORT MOUNTS, Series DJM 10 9 D Series-DJM Dynemech provides isolation solutions for various machines and mounting conditions. The Dynemech Jack mounts provide effective vibration isolation. The Dynemech Jack Mounts also provide for high machine leveling capabilities. The exchangeable sockets below provide for many designs as per customers requirements. These jack mounts provide high load capacity and best level stability. The bottom design provides for non-skid properties for the Jack Mount. The Jack mount provide very good Passive Vibration Isolation Applications: Machine Tools, Textile Machine, Graphics machines, Planners etc. Dia (D) (mm) eight () mm Model Load Kg/pc DJM Kg DJM Kg DJM Kg G (mm) EX () (mm) M20x2.5 (Length 38mm) M20x2.5 (Length 38mm) M20x2.5 (Length 38mm) Interchangeable Leveling Socket G Adapter with M20x2.5 Inner Thread and M40x2 External Thread Bolt-through 25mm diameter bore Leveling socket with anti-skid pad Note: Please mention type of socket required at the time of ordering Countersink as per customer requirement and bolt profile
14 Texl Foot, Series DTXL A G C Texl Foot d CI Body mount for machines for bottom and top clamping G F Model A mm mm G mm d mm F mm C mm DTXL M
15 D d S Bolt h S 15 S
16 Series DRC are suitable for machines having plain hole in the base. Levelling is done by turning the bolt which lifts the cover plate along with the machine. Available both in 150 &100 mm height. D d D 16
17 STUDMOUNTS, Series DS G L Compression Compression/Shear G G G L ASSEMBLY G D Type DS-MM D Type DS-MF Shear 17 D Type DS-MP D Type DS-FF D Type DS-FP
18 d Bolt D LXB 18
19 19
20 Anti-Vibration Table Anti-Vibration Table Series DIT-E Series DIT-AS Elastomeric Material igh Precision Laboratory Balance with Readability 10mg Pneumatic Air Springs Anti-Vibration Table - VIT Isolated Using Pneumatic Air Springs Auto-Levelling Pneumatic MountsSeries SeriesDIT-AS, DIT-AL Anti-Vibration Table Applications Mitutoyo Contracer CV-3200 Mitutoyo Roundness Tester RA installed on Dynemech Anti 2200 with LC-0.13nm installed on Vibration Table DIT-AL-02 Anti-Vibration Table Electro Magnetic Force Compensation Mitutoyo Roundtest RA 1600 igh Precision Analytical Balance with 0.01mg accuracy on Dynemech Anti-Vibration Table DIT-AL Electro Magnetic Force Compensation Dynemech igh Precision Analytical Balance with 0.01mg accuracy Anti Vibration Table Electro Magnetic Compensation Atomic ForceForce Microscope on igh Precision Analytical Balance with DIT with 0.01mg Pneumatic accuracy Isolation
21 21
22 40x55 Ø 9 mm Ø 9 mm DMS 1 22 DMS 2
23 23
24 AXB ø/i Amplitude y [mm] y1(t) 0 mm d= t Time t [sec] Oscillations
25 Questionnaire 25
26
27
Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationEnidine Wire Rope Isolators. Wire Rope Isolators. Solutions in Energy Absorption and Vibration Isolation.
Enidine ire Rope Isolators ire Rope Isolators Solutions in Energy Absorption and Vibration Isolation. Introducing Typical ire ire Rope Rope Isolator Isolators Applications Electronic Enclosures Medi-vac
More informationHead office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
More informationModular Structural Parts
Even complicated residual limb positions are easy to supply, moreover there are manifold options to do so. We offer a wide variety of elaborate modular structural parts that enable you to align functional
More informationUniversal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More informationGRADATION HEAVY DUTY SIEVE SHAKER MANUAL SIEVE SHAKER ECONO SIEVE SHAKER MODELS DESCRIPTION POWER STANDARDS MODELS DESCRIPTION STANDARDS
58 GRADATION HEAVY DUTY SIEVE SHAKER The G2127 Heavy Duty motorized sieve shaker holds up to 10 full height 2" deep, 20 half height 1" deep, or 14 1-5/8" deep sieves, plus pan and cover. 3" and 5" sieves
More informationTable of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
More informationPRESSES. Rack and pinion presses. Toggle presses. Impact presses. Pneumatic presses. Rotary indexing table
PRESSES Rack and pinion presses Toggle presses Impact presses Pneumatic presses Rotary indexing table PRESSES Rack and pinion presses HP 40 HP 150 HP 150 T Type HP 40 HP 150 HP 150 T HP 225 T HP 200 Z
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More informationZB5AV03 green pilot light head Ø22 plain lens for BA9s bulb
Characteristics green pilot light head Ø22 plain lens for BA9s bulb Complementary CAD overall width CAD overall height CAD overall depth Product weight Station name Electrical composition code Environment
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More informationZB5AV043 red pilot light head Ø22 plain lens for integral LED
Product datasheet Characteristics ZB5AV043 red pilot light head Ø22 plain lens for integral LED Complementary CAD overall width CAD overall height CAD overall depth Product weight Station name Electrical
More informationP F
12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM Copyright 2014 REV. 9-MAY-2014 1 SAFETY INFORMATION PG. 3 SET-UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA
More informationReduces installation time Locks tray into position - no hardware required
Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
More informationPNEUMATIC CRIMPER PC 12-8B OPERATING MANUAL
PNEUMATIC CRIMPER PC 12-8B OPERATING MANUAL CONTENTS www.americanelectrical.com SAFETY BASIC INFORMATION... 1 SYMBOLS.1 OPERATION OF MACHINE & POSSIBLE DANGERS. 1 DESIGNATED USE. 2 DANGERS 2 PLACES FOR
More informationSHELVING 45 AND TYRE RACKS
AND TYRE RACKS AND TYRE RACKS Particularly suitable for the storage of heavy and bulky materials (cannot be used as a pallet rack). Made entirely of certified first grade steel sheet and profiled with
More information2018 METRIC CATALOG RHINO CART MOBILE FI XTUR I N G STATION RHINO CART ALL-INONE CHA R GE R IGH T T HR O UGH YOUR MO S T CHALL E N GI N G P R OJE CTS!
RINO CART MOBILE FI XTUR I N G STATION RINO CART MOBILE FI XTUR I N G STATION ble a T + F i x t u re K i t ALL-IN-ONE ALL-IN-O ALL-INONE M ob ilit y & S to r a g e 2018 METRIC CATALOG CA R GE R IG T T
More informationCable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1
Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,
More informationZB5AV033. Main. Device short name
Product datasheet Characteristics ZB5AV033 Main Range of product Harmony XB5 Product or component type Head for pilot light Product compatibility Integral LED Device short name ZB5 Bezel material Plastic
More informationUnits Available Up To 7/8 Tap Capacity. 30 Day Free Trial
Units Available Up To 7/8 Tap Capacity 30 Day Free Trial FlexArm Models A-32 0-80 to 9/16 Tap Capacity 11 to 34 Working Range 6 Motor Options Size 1 Quick Change Chuck S-36 and M-60 0-80 to 3/4" Tap Capacity
More informationServo Auto Collet Spindle SP00AC-SR12000
Servo Auto Collet Spindle SP00AC-SR12000 Applications Deburring Cutting Grinding Surface finish Brushing Polishing Low power buff Drilling Tapping SP00AC-SR12000 - closed loop servo driven pneumatically
More informationBEVEL GEAR WINCH RATIO 3:1
BEVEL GEAR WINCH RATIO 3:1 32 A 34 57 48 45 B 89 82,5 45 54 17 6,5 C Bevel gear in Zamak. Conic mechanism in Zamak. Steel spring brake. Efficiency: 0,60 Floating on ball in Nylon. Right and left rotation.
More informationserial number A1159T or lower, which includes all manufactured in 2008 Not compatible and not required. Figure 1 Auger Update Sites Call-Outs R B
Installation Instructions 1 Auger Carrier Update ADC2350 Air Carts Used with: ADC2350B General Information These instructions explain how to install an Auger Carrier Update on a pre-2009 pull-behind air
More informationZB5AA46 red recessed pushbutton head Ø22 spring return unmarked
Product data sheet Characteristics ZB5AA46 red recessed pushbutton head Ø22 spring return unmarked Complementary CAD overall width CAD overall height CAD overall depth Product weight Mechanical durability
More informationDI-ACRO #24 HAND SHEAR INSTRUCTION MANUAL
DI-ACRO #24 HAND SHEAR INSTRUCTION MANUAL REV. G 6/12 1 TABLE OF CONTENTS A. SAFETY INFORMATION PG. 3 B. SET UP PROCEDURE PG. 3 C. MAINTENANCE PG. 3 D. TECHNICAL DATA PG. 3 E. OPERATING PROCEDURES PG.
More informationHeavy-Duty Tripod Range
Heavy-Duty Tripod Range Vinten Camera Control Solutions Heavy-Duty Tripod Range SPARES & REPAIRS PUBLICATION PART 3366-9 ISSUE 1 Copyright Vinten Broadcast Limited 2000 All rights reserved throughout the
More informationProbe station system
Probe station system Manufacturer: Micromanipulator Mode: 450PM-HR Descriptions: The Model 450PM 8 probe station offers stable and reliable probing performance. It is based on a design of Micromanipulator
More informationMBE Mounts and Adapters
MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking
More informationForm Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
More information5. Operating instructions: Octagon 200CL
1. Technical specifications 5. Operating instructions: Octagon 200CL Copyright 2015 by Endecotts Ltd. 33 1. Setting up Technical specifications SIEVE SHAKER MODEL: Octagon 200CL General Information The
More informationDirectory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
More informationRobust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationTH ST N OAK PARK HEIGHTS, MN P F
12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM SAFETY INFORMATION PG. 3 SET UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 OPERATING PROCEDURES PG.
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
More informationSpecification. Width - 190mm Length - 230mm Thickness - 8mm Assembled height - 78mm Weight - 805g Table material - AL5052 Screw material - SS304
Specification Width - 190mm Length - 230mm Thickness - 8mm Assembled height - 78mm Weight - 805g Table material - AL5052 Screw material - SS304 Motherboard support - Mini ITX Drive support - Up to 2 x
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationZB5AW743 red Ø40 illum mushroom pushbutton head Ø22 latching for integral LED
Product datasheet Characteristics ZB5AW743 red Ø40 illum mushroom pushbutton head Ø22 latching for integral LED Complementary CAD overall width CAD overall height CAD overall depth Product weight Resistance
More informationSensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.
Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................
More informationLCD Series & Tablet Series Set-Up Instructions
LCD Series & Tablet Series Set-Up Instructions Parts List: Mount Arm (1) T-Nut (1) Large Camera Knob (1) Small Camera Knob (1) Mirror Knob (2) Monitor/Mirror Assembly (1) Teleprompter Parts Step #1A Remove
More informationBelleville Spring Washer Series
Belleville Spring Washer Series High Load in Small Spaces VARIOUS CONFIGURATIONS OF BELLEVILLE WASHERS Single ONE WASHER Parallel ALL WASHERS STACKED THE SAME WAY Series ALL WASHERS STACKED OPPOSITE EACH
More informationFits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
More informationSMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
More informationFurther Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationSELECTOR 4 / 8. Instrument for torque control ASL 11/17
Instrument for torque control SELECTOR 4 / 8 ASL 11/17 3000840 ENGLISH Pictograms WARNING It can be dangerous to use this machine if the operating instructions are not carefully followed. Before using
More informationSection 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More informationIS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More informationOperators Guide. Pozi-Loc Tripods. Vinten Camera Control Solutions
Operators Guide Pozi-Loc Tripods Vinten Camera Control Solutions Vision Pozi-Loc Tripods Publication Part No. 3770-8 Issue 3 Copyright Vinten Broadcast Limited 2005 All rights reserved throughout the world.
More informationGo from sit to stand, with one touch
Sit-to-Stand Workstation StarTech ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
More informationVacuum Maintenance Manual (EXCERPT Tim Benedict)
1. Position a ladder, scaffold, or work stand, on the right side of Vacuum Skid where the blower motors are installed. 2. Locate the six (6) vacuum hoses connecting the blower motors to the HEPA housings
More informationAHC System. Specifications. Series MA210 MA310 Positioning Max. transportable mass
AHC System Series Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
More informationTool Clamping. No > Pressure generators. > Clamping bars. > Pressure-generator accessories. No ** > Clamping heads
Tool Clamping No. 6906P > Pressure generators No. 6906PB** > Pressure-generator accessories No. 6945-22-20 > Clamping bars No. 6945-22 > Spacer bars No. 6945-11-** > Clamping heads No. 6946 > Wedge clamp
More informationMPI TS150-THZ 150 mm Manual Probe System
MPI TS150-THZ 150 mm Manual Probe System Industry s first explicitly designed probe system for accurate measurements at mm-wave and sub-mm wave (THz) frequency range FEATURES / BENEFITS Variety of Applications
More informationKM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
More informationZB5AT8643M red Ø40 illum Emergency stop pushbutton head Ø22 trigger and latching
Product datasheet Characteristics ZB5AT8643M red Ø40 illum Emergency stop pushbutton head Ø22 trigger and latching Complementary CAD overall width CAD overall height CAD overall depth Product weight Resistance
More informationTools for Pipe Welding
E L D Tools for Pipe elding ELD-TECH ApS E L D T Clamp L i f e t i m e warranty on broken parts Due to its unique design, T Clamp ensures that the clamping forces are evenly spread round the pipe to be
More informationASSET LGA1366 Top-side Probe
ASSET LGA1366 Top-side Probe (Manual version 1.1) For gaining test access to the debug port of Intel processors that are designed for use in LGA1366 Sockets (Socket B). These include the Intel Core i7
More information200 mm Semi-automated Probe System with BlueRay Technology
PA200BlueRay 200 mm Semi-automated Probe System with BlueRay Technology DATA SHEET The sets a new standard for high-speed accuracy. Its precision ensures smooth probe landing with safe, repeatable electrical
More information2 SHINKO DENSHI BALANCES & SCALES Price List September 2017
SECTION 2.1 SHINKO DENSHI VIBRA BALANCES 2.1.1 SJ SERIES COMPACT CLASS II HIGH RESOLUTION BALANCE Mono-metal tuning-fork sensor (mmts) with 5 year warranty. Resolution up to 1:62,000. 20 step bar graph
More informationT E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
More informationSensor Accessories Retroreflectors and Retroreflective Tape 8-2
-2 Retroreflectors and Retroreflective Tape PG.05E.17.T.E Retroreflectors ontents Overview.................... -2 Model Selection............... -3 Dimensions.................. -3 High Quality Retroreflectors
More informationPELCO SEM Specimen Holders
PELCO SEM Specimen Holders The Modular Concept Hitachi JEOL FEI/Philips ZEISS/LEO TED PELLA, INC. Microscopy Products for Science and Industry The PELCO modular SEM specimen holder system offers the most
More informationZB5AD2 black selector switch head Ø22 2-position stay put
Product data sheet Characteristics ZB5AD2 black selector switch head Ø22 2-position stay put Complementary CAD overall width CAD overall height CAD overall depth Product weight Mechanical durability Station
More informationFeatured Products - RU Marking Standard on Hoffman brand
: Open Frame Racks CHAPTER Open frame racks are versatile solutions for mounting hubs, switches, routers and servers. Easy access to all sides simplifies maintenance and updates. Solidly constructed, Pentair
More informationSECTION 5 -- EQUIPMENT LAYOUT & EQUIPMENT ENVIRONMENTS
SECTION 5 -- EQUIPMENT LAYOUT & EQUIPMENT ENVIRONMENTS CONTENTS PAGE 1. GENERAL... 5-1 1.1. Introduction... 5-1 1.2. Equipment Layout Requirements... 5-1 2. EQUIPMENT FRAMES... 5-2 2.1. Introduction...
More informationT-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
More informationAdjust-O Magnet Squares
Adjust-O Magnet Squares The original magnet squares featuring On/Off switches. Patent No. US 7,009,480 B2 Adjust-O Magnet Squares The On/Off switch HEAVY DUTY HEAVY DUTY MSA45 MSA48-HD MSA53-HD Multiple
More information«АВТОП» Latch RH1 Locks. Plate Control. Static Fmax newton Dynamic Fmax newton. Latch locks
Latch locks KL Static Fmax. 40000 newton Dynamic Fmax. 16000 newton REF L La Lb l1 Includes Does not include KL 1-2-90 90 117 137 172 KF/KK/KV KU KL 1-2-170 170 197 217 252 KF/KK/KV KU KL 1-2-220 220 247
More informationMPI TS150-AIT 150 mm Manual Probe System
MPI TS150-AIT 150 mm Manual Probe System Industry s first explicitly designed 150 mm probe system providing accurate tests for mm-wave, THz, and automated impedance tuner applications FEATURES / BENEFITS
More informationT E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
More informationTransparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
More informationUltima X5000 Round Duct Mount Kit User Instructions
Ultima X5000 Round Duct Mount Kit User Instructions MSA Kit 10179124/10179321 - Ultima X5000 316 Stainless Steel Parts List / Instructions Round Duct Mount Gasket (1) Round Duct Mount Base Plate (1) Base
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
More informationZB4BV013 white pilot light head Ø22 plain lens for integral LED
Characteristics white pilot light head Ø22 plain lens for integral LED Complementary CAD overall width CAD overall height CAD overall depth Product weight Resistance to high pressure washer Electrical
More informationMBX INSTRUCTION MANUAL. Please read this manual carefully before using the MBX! Mid-range studio stand
MBX Mid-range studio stand INSTRUCTION MANUAL EN Please read this manual carefully before using the MBX! CAMBO Thank you for purchasing a Cambo product. This new classed Mid-range studio stand will suit
More informationCLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
More informationGeneral Catalog Unlocking the full potential of your machines
General Catalog Unlocking the full potential of your machines 182 EROWA ITS Compact Combi Three in one Seamless integration into the existing ITS system. The ITS Compact CombiChucks have the same mounting
More informationEMV Cable Transit, Modular System
EMV Cable Transit, Modular System Electromagnetic screening Fire-resistant, gas- and...quick-fix TCME,...Filler block FBE,...Wedge K-10/EMV Plug Seal RRE for pipes and core holes bst - Register 5 B5.EMV.01
More informationZB4BW533 green flush illuminated pushbutton head Ø22 spring return for integral LED
Product datasheet Characteristics ZB4BW533 green flush illuminated pushbutton head Ø22 spring return for integral LED Main Range of product Harmony XB4 Product or component type Head for illuminated push-button
More informationProducts Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
More informationFxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
More informationTremco FX 130 Heavy Duty Chemical Anchor
Description FX 130 is a heavy duty 2 component vinylester styrene free injection system specially formulated for anchoring threaded bars, reinforcing bars (rebars) and sockets into concrete and most other
More informationLaserlyte-Flex Userguide
Laserlyte-Flex Userguide 1. Product Overview Thank you for purchasing the Laserlyte Flex alignment system. This module emits a spot or pattern in the visible wavelength range. If you have any queries or
More informationOperating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationTDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit
TDQ612075-K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit Ex GST Inc GST $3,290.00 $3,619.00 ORDER CODE: MODEL: Type: W07705 TDQ612075-K1 Rhino Cart
More informationMore Precision. capancdt 61x0/IP // Capacitive measuring system for industrial applications
More Precision capancdt 61x0/IP // Capacitive measuring system for industrial applications 2 Capacitive measuring system for industrial applications capancdt 61x0/IP Compact and robust controller 8m IP68
More informationOUTDOOR BASKETBALL OVERHANG 2.25 M - COMPETITION SQUARE STEEL TUBE 140 X 140 MM
OUTDOOR BALL OVERHANG 2.25 M - COMPETITION CONFORMS TO THE SPORT CODE AND NF EN 1270 NORM The competition basketball is played with a ring 3,5 m high in France, for departmental and regional competitions,
More informationAPS/SPS200TESLA. 200 mm Fully-automated On-Wafer Probing Solution for High-power Devices
00 mm Fully-automated On-Wafer Probing Solution for High-power Devices DATA SHEET The is the industry s first fully-automated on-wafer probing solution focused on production performance for high-power
More information