CONTENTS. Who wouldn t like to have a simple device for the push camera inspection of house and property sewerage systems?

Transcription

1 CompactPlus

2 2 CONTENTS Who wouldn t like to have a simple device for the push camera inspection of house and property sewerage systems? Quickly understandable, easily transportable, yet equipped with all the functions absolutely necessary to do the job. Such a device does not exist? Oh, but is does: With the CompactPlus, any inspection will be concluded in no time at all!

3 CONTENTS CompactPlus Reels Cameras Accessories Software The Device Operation page 4-5 page 6-7 Reels page 12 Cameras page 8-11 Accessories page 13 can2d page 14

4 The CompactPlus is the ideal base device for a speedy push camera inspection. Control of the camera as well as user-friendly data entry are conducted via buttons and a joystick, all of which are easily operated with work gloves. What else makes the device unique? It is part of the Kummert product line and therefore, can be utilized with any reel and push camera from the Kummert range of products. Functional Design Perfect Workmanship 44

5 c THE DEVICE The device s integrated software allows for an easy operation. A lengthy familiarization or even product training are not necessary at all. During inspection, markings can be set in addition to taking JPEG photos and recording MPEG2 videos. These markings can then be converted into observations using the office software can2d. High-quality, extra light materials are the reason why the device is just a featherweight of 11.8 kg without the reel. Hence, the device is easily transported or carried about. Furthermore, the entire device is splash-proof and easy to clean.

6 FEATURES Daylight Viewable Display The CompactPlus is ideally suited for both indoor and outdoor inspections. Its 8 inch, daylight viewable monitor simply adjusts to the ambient light and displays a clear image even in direct sunlight. Tiltable Monitor Depending on the operating position, the monitor can be tilted at various angles. The monitor cover protects the display during transport and serves as a sun shield during inspection. USB Memory All data is saved directly to a supplied 32 GB USB thumb drive, not requiring any time consuming data export. Battery Operation Is the power outlet often unavailable? The integrated battery pack lasts for 3 hours and, after a complete discharge, is fully recharged after only 2 hours. Rubber Tires Two soft rubber tires with a diameter of 16 cm enable the user to roll the CompactPlus without effort and to master steps or curbs. 66

7 OPERATING SOFTWARE All important software features are readily accessible via the main menu and at the push of a button. Videos and photos are recorded entirely independent from any standard or project. They can also be supplemented with freely entered texts at any time. If, however, a standard compliant documentation with reports and viewer software is required, the software will support the entry of the most important basic data and create a project, which later can be imported into can2d or can3d. The push of a button will also suffice to set markings during recording. These markings will be replaced by standard compliant observations during office post-processing. The CompactPlus is also the perfect base device for special tasks. In combination with the camera Cam- Flex, the entire pipe network can be inspected in one continuous process. Using the camera K-70L, the pipe s nominal diameter can be determined at any time regardless of recording a video or not. And with the right hardware accessory, the CompactPlus can even be used with third-party systems. The external text inscription feeds the video and selected texts into CCTV inspection vehicles and devices manufactured by other companies. CompactPlus external text inscription display on your system

8 CAMERAS c Kummert push cameras stand out due to their sleek shape and flexible fabric tubing, thus navigating sharp bends easily as well as not becoming hooked when pulled back. The smooth-edged cameras also make for trouble-free cleaning. 1 K-28 The K-28 is the smallest one in the line of cameras as well as the only model that is non-detachably connected to its 20 meter push rod. Featuring a diameter of 28 mm, the camera can be used to survey pipes of DN40 and up. 3 equal-white LEDs guarantee the optimal illumination of the pipe. The 2.2 mm super wide angle lens is enclosed by epoxide resin and stainless steel. This material composition reduces tension on the panes and makes the K-28 more robust. 2 K-35 The K-35 is suited for pipes of DN50 and up. Its 12 white high brightness LEDs illuminate the pipe interior perfectly. The camera features a fixed focus, as well as a super wide angle lens of 2.2 mm, which is in focus in the range of 3 cm bis 30 cm. In combination with a centering sleeve, the camera s span of application is extended to diameters of DN70 and up, in connection with a centering trolley to diameters of even DN100 and up. 1 88

9 3 K-50D The K-50D is the most current innovation by Kummert in the line of push cameras and can be used for inspecting dimensions starting at DN70. The camera can be operated in two modi. The complete picture mode displays the entire viewable pipe area on screen, the tele mode captures an image section and zooms in on it. To look at the section from all angles, it can now be virtually panned. Flashing LEDs facilitate the outstanding quality of the always upright image, thus ensuring that a still image can be taken from any video image. Furthermore, the integrated locating transmitter allows for the localization of the camera K-50D in any pipe at any time. 2 4 K-70/K-70L The well-proven pan and tilt cameras for pipes of DN100 and up do not miss a single thing during inspection. This attribute results from an infinite pan range, a high tilt range of +/- 115 and 10 white highpower LEDs, which ensure the optimal illumination of the pipe s depth. Additional highlights are the motor-controlled focus and the automatic self-leveling mechanism. Both cameras are filled with an internal pressure of 1 bar, which is secured by an internal pressure control. The difference between the two cameras: The K-70L features two high-grade laser diodes for exact measurements of the pipe diameter during inspection. 3 4

10 CAMFLEX Moving into laterals without any auxiliary insertion guide - the CamFlex is THE camera for the inspection of complex pipe networks in one continuous process! The CamFlex is easily operated via the joystick on the control panel of the CompactPlus. Its capacity to bend itself from a straight position up to a 90 angle ensures that nearly all laterals from DN100 to DN200 can be moved into and, on top of that, multiple laterals one after the other. Even 90 bends are smoothly navigated by the CamFlex from DN125 and up. The excellent image quality is actually guaranteed by several camera features. On one hand, 18 white highpower LEDs perfectly illuminate the pipe. On the other hand, the camera is equipped with a motor-controlled focus, which is adjusted to a range between 5 mm and infinity. Furthermore, the always upright image ensures the optimal orientation during inspection. 1010

11 Optimal Positioning c High-Tech-Materials Great Maneuverability

12 REELS All reels differ in their rod length and diameter. Although interchangeable, they are purpose-built for each individual camera. To ensure the best possible pipe bend mobility and push performance over a great distance, each camera should be operated with its designated reel. Accurate to a Centimeter When the base device is turned on, the reel s meter counter takes precise measurements as soon as the push rod is moved. The covered distance is displayed on the base unit s screen. Well Restraint The applied reel lock prevents unwanted unreeling of the push rod. To release the lock pin, simply turn it and continue with the inspection, while the freewheel brake controls the rod s coasting speed. Foolproof Assembly The reel s fastening hooks fit on every Kummert base device. No complex assembly is necessary - just lifting the reel and hooking it in. Recommended Camera-Reel-Combinations: from DN40 -> K-28 with non-detachable reel from DN50 -> K-35 with reel H-S30 from DN70 -> K-50D with reel H-M50 from DN100 -> K-70/K-70L with reel H-L60 from DN100 -> CamFlex with reel H-XL75/H-XXL

13 ACCESSORIES 1 HR-70 Locating Transmitter Using the locating transmitter and a separately supplied locator, a camera s position can easily be tracked during inspection. Positioning data are sent with a frequency of 512 Hz. Featuring a short hose on either side, the locating transmitter is mounted between the camera and the rod. Hence, the connected camera does not forfeit its ability to navigate bends Centering Aids K-35 When equipped with the centering sleeve, the K-35 is suited for the inspection of pipes from DN70. The centering trolley even allows for the inspection of dimensions between DN100 and DN150. Its wheels facilitate a smooth push motion. K-70/K-70L Centering Trolley The centering trolley is suited for the cameras K-70/K-70L in pipe diameters from DN150 to DN300. The 12 wheels ensure a steady push operation.they also elevate and, therefore, protect the camera in the pipe. 2 4 K-70/K-70L Centering Trolley with Additional Lighting Featuring 24 high brightness LEDs, the centering trolley with additional lighting provides for an optimal illumination of all pipe dimensions between DN200 and DN400. The centering trolley is quickly assembled. Via a screw and plug connection, the K-70/K-70L is fixated in the trolley, which will then be mounted to the reel. The trolley is supplied with its own carrying case to protect it during transport. 3 4

14 SOFTWARE for the office - can2d INSPECTION with the CompactPlus: save photos/videos directly onto the USB thumb drive disconnect and deliver USB thumb drive for data review REVIEW connect USB thumb drive to the PC and get started: evaluation -> post-editing -> export 1414

15 1 2 Evaluation To evaluate projects, simply choose from one or more standards depending on the selected language. During import, a list with all markings of a pipe or sewer section and the corresponding video image will be displayed. Once a marking is checked, an observation can be entered with the help of select lists and a few quick entry buttons. Something vital was missed during recording or inapplicable information was entered? No problem at all. Markings can simply be deleted or added. Post-Editing All entries and even the video inscribed texts remain editable until the export. Corrections of basic data, re-processing of observations and entry of new data can be performed without any problem Export During the final export, all data are irrevocably inscribed. Various reports document the surveyed status of the pipe network. The free viewer software enables clients to look at all the videos, photos and reports on their PC. 3

16 SPECIFICATIONS CompactPlus Accessories Monitor Dimensions (W x H x L) Weight Power supply Control camera Removable memory Video/Photo format Lithium-ion battery pack Operating time battery Charging time battery daylight-viewable 8" LCD-TFT color display, antireflection, resolution 800x mm x 960 mm x 520 mm 11.8 kg AC V; Hz; max. 150 W 3-axis-joystick 32 GB USB thumb drive MPEG2/JPEG 16.5 V; 6.9 Ah approx. 2 hours approx. 2 hours Locating Transmitter Diameter 43 mm Frequency 512 Hz Operating distance 5-7 m depth (depending on condition of soil) Range of use DN70 and up Sealing O-rings, waterproof up to 1 bar Additional Lighting Range of use DN200 to DN400 Illumination 24 high brightness LEDs Sealing O-rings, waterproof up to 1 bar Reels H-S30 H-M50 H-L60 H-XL75 H-XXL100 Diameter/Length 6 mm / 30 m 7 mm / 50 m 8 mm / 60 m 9 mm / 75 m 9 mm / 100 m Bending radius min. 180 mm min. 210 mm min. 250 mm min. 290 mm min. 290 mm Meter counter reflex light barriers and micro controller Brake adjustable freewheel brake, reel lock 1616

17 Cameras K-28 K-35 K-50D K-70/K-70L Range of use DN40 and up DN50 and up DN70 and up DN100 and up Diameter 28 mm 35 mm 49 mm 70 mm Weight 3.05 kg with reel 156 g 410 g 820 g Camera 1/4", resolution 728 x 560 ¼ CMOS sensor, 480 lines CMOS color sensor, 2.36 megapixels ¼ color-ccd; 0.5 Lux; 350 lines Lens 2.2 mm super wide angle 2.2 mm super wide angle 2.2 mm super wide angle 3 mm Focus n/a fixed focus n/a controlled by step motor Illumination 3 equal-white LEDs 12 white high brightness LEDs 9 equal-white LEDs 10 white highpower LEDs Pan range n/a n/a n/a infinite Tilt range n/a n/a 2 modes: Telemode and complete +/- 115 picture; tilt range:+/- 30 field of vision when tilting: 60 field of vision complete picture: 115 Depth of field n/a 3 cm to 30 cm 2 cm to infinite 5 mm to infinite Sealing O-rings, waterproof up to 1 bar O-rings, waterproof up to 1 bar O-rings, waterproof up to 1 bar shaft seals and O-rings, waterproof up to 1 bar Special features fixed permanently to 20 m reel n/a automatic self-leveling; integrated locating transmitter 512 Hz (640 Hz available on request) automatic self-leveling; internal pressure control; K-70L: laser diodes for measuring nominal diameter CamFlex Range of use Camera Lens Focus Illumination Bending range Depth of field Sealing Special features DN100 to DN200 1/4 color-ccd; 0.5 Lux; 350 lines 2.4 mm controlled by motor 18 white highpower LEDs 90 in all directions 5 mm to infinite O-rings, waterproof up to 1 bar automatic self-leveling, slope measurement, gyro sensor for taking bend measurements

18 Kummert GmbH Albert-Einstein-Str Gerolzhofen Phone: +49 (0) 9382 / Fax: +49 (0) 9382 / info@kummert.de c 1818 Errors and technical changes excepted. Product design is subject to change during the delivery period as long as these changes will be made in consideration of the buyer s interest. Color variations may occur due to printing techniques.