S S 0.13 U1/4 ~ U5/ KH 16A-NL008 (U3/8) S S KH 19A-NL110
|
|
- James Spencer
- 6 years ago
- Views:
Transcription
1 KH-A-NL Quick Change Stub Tapper Applications Designed for use on KH-A spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KH-A-NL in a condition where the tension feature always works a little. In this case, the length adjustment should be retained less than half. Feature Small projection length. Stable tapping. Projection length is adjustable Length compensation. Quick change (Sold separately) For capable tap sizes, please refer to P chart. Code Model Tap Size Adapter size D C C2 L L2 S Max F kg KH 4A-NL6 M3 ~ M8(M) S S.3 U/4 ~ U5/ KH 6A-NL8 (U3/8) S S KH 9A-NL S - S KH 2A-NL S - S.25 M3 ~ M2(M5) KH 22A-NL U/4 ~ U7/ S - S KH 24A-NL (U9/6) S - S.37 Pipe(PT,PS,PF)/8 ~ / KH 25A-NL S S KH 26A-NL S S KH 28A-NL S S KH 3A-NL25 M8 ~ M S S KH 32A-NL22 U3/8 ~ U7/ S S KH 35A-NL22 Pipe(PT,PS,PF)/8 ~ / S S KH 36A-NL S S KH 48A-NL32 M6 ~ M S S.Tap sizes in brackets are for light tapping only. 2. Tap adapter is sold separately. 3. We recommend you to have mm leeway in your tool layout, as L2 dimension is dispersed. 4.Refer to P.44 for spindle dimension. Tap Adapter P. 458 Ordering Example KH-4A - NL 6 Length compensation (S Max) Adapter size 43
2 Dimension for KH-A spindle Size D D D2 C -. C2 -. C3 Dimension for KH-spindle L L2 +. 2AR or more AR or more A or more A or more A or more A or more A or more A or more A or more A or more A or more A or more A or more A or more A or more L3 W C L4. Spindle dimension for KH-A only, not for KH. 2. All corners not specified should be chamfered to C.5. Material of spindle end : SCM45 Heat treatment : HV63 ~ 697 Carburized depth :.4 ~.6 Size D D D2 C -. C2 -. C3 L L or more or more or more or more or more or more L3 W C L4. Spindle dimension for KH only, not for KH-A. 2. All corners not specified should be chamfered to C.5. Material of spindle end : SCM45 Heat treatment : HV Carburized depth :
3 Basic 4 Models QUICK CHANGE TAP ADAPTER Quick Change S B N SN B S N Quick Change Safety Torque Quick Change Length Adjustment Quick Change S Safety Torque N Length Adjustment In addition to the basic 4 models, wide variety of models (extended size, enlarged size, R type for short shank tap etc.) are available. 456
4 : Quick Change Tapping chuck and tapping adapter :Simply insert tap adapter into tapping chuck. 2:Tapping chuck and tap adapter are connected firmly. 3:Push down on operation sleeve of tapping chuck while removing tap adapter. :Insert tap into bottom of tap adapter, and rotate tap manually to connect them firmly. 2:Tap and adapter are connected firmly. 3:Push down on ball bush while removing tap. Safe torque device activates to prevent breakage tap when torque more than fixed amount is applied to tap. (Use with a tapper equipped with axial compensation mechanism.) Tapping adapter and Tap S : Safety torque When using left handed tap adapter, please specify. N : Length adjustment Insert hex. wrench into bottom of tap adapter and turn to adjust tool length. Tap adapter with tool adjustment mechanism can be recommended for following conditions..tool adjustment with prestting gauge. 2.When tap length changes due to re-grinding. 3.When you do not want to use N/C machine tool compensation function. 457
5 Quick Change Tap Adapter Applications For through hole, blind hole, right-hand thread and left-hand thread. Feature Quick Change In case you are afraid of tap breakage, choose a S B and a tapping chuck with safety torque clutch. For capable tap sizes, please refer to P chart. Code Model Tap Size Chuck size D D D2 L L3 L4 L5 kg M3 ~ M8(M) U/4 ~ U5/6(U3/8) M3 ~ M2(M5) U/4 ~ U7/6(U9/6) Pipe(PT,PS,PF)/8 ~ /4 M6 ~ M8 U/4 ~ U3/4 M8 ~ M22 U3/8 ~ U7/8 M26 ~ M38 U ~ U 3/8 7/8 ~ -3/4 M22 ~ M48.Tap sizes in brackets are for light tapping only. 2. Calculate tap projection length from L dimension. 3. L and L6 dimensions fluctuate with tap sizes. Always take into account ±.5mm allowance. 4.Refer to P.462 for tap shank dia. and square dimension Ordering Example M8J Adapter size Tap size 458
6 S B Quick Change Tap Adapter Applications For right-hand thread only. Through hole and blind hole. Feature Quick Change Safety torque clutch actuates to prevent tap breakage when an excessive torque is applied to tap. In this case, a tapping chuck with compression device should be used together. For capable tap sizes, please refer to P chart. Code Model Tap Size Chuck size D D D2 L L3 L4 L5 kg 2 6 SB 2 6 SB 2 64 S4B 2 62 S2B 2 63 S3B S4B M3 ~ M8(M) U/4 ~ U5/6(U3/8) M3 ~ M2(M5) U/4 ~ U7/6(U9/6) Pipe(PT,PS,PF)/8 ~ /4 M6 ~ M8 U/4 ~ U3/4 M8 ~ M22 U3/8 ~ U7/8 M26 ~ M38 U ~ U 3/8 7/8 ~ -3/4 M22 ~ M48.Tap sizes in brackets are for light tapping only. 2. Calculate tap projection length from L dimension. 3.Tapping chuck with compression device should be used together. 4.Specify PT, PS or PF when using a pipe tap, as each of them has various safety torque value. 5.L and L6 dimensions fluctuate with tap sizes. Always take into account ±.5mm allowance. 6.Refer to P.462 for tap shank dia. and square dimension Ordering Example SB M8J Adapter size Tap size 459
7 N Quick Change Tap Adapter Applications For through hole, blind hole, right-hand thread and lefthand thread. Feature Quick Change Length adjustment facilitates your depth control of reground tap. For capable tap sizes, please refer to P chart. Code Type Tap Size Chuck Size N D D D2 L L3 L4 L5.Tap sizes in brackets are for light tapping only. 2. Calculate tap projection length from L dimension. 3. L and L6 dimensions fluctuate with tap sizes. Always take into account ±.5mm allowance. 4.Refer to P.462 for tap shank dia. and square dimension. Ordering Example N Adapter size N N N2 N3 M Tap size M3 ~ M8(M) U/4 ~ U5/6 (U3/8) #-2, /4 - /2 M3-M2 5/6-7/8 M8-M2 3/6 - -3/8 M4-M
8 SN B Quick Change Tap Adapter For capable tap sizes, please refer to P chart. Code Model Tap Size Chuck size 2 6 SNB 2 6 SNB 2 64 SN4B 2 62 SN2B 2 63 SN3B M3 ~ M8(M) U/4 ~ U5/6(U3/8) M3 ~ M2(M5) U/4 ~ U7/6(U9/6) Pipe(PT,PS,PF)/8 ~ /4 M6 ~ M8 U/4 ~ U3/4 M8 ~ M22 U3/8 ~ U7/8 M26 ~ M38 U ~ U 3/8.Tap sizes in brackets are for light tapping only. 2. Calculate tap projection length from L dimension. 3. Tapping chuck with compression device should be used together. 4.Specify PT, PS or PF when using a pipe tap, as each of them has various safety torque value. 5.L and L6 dimensions fluctuate with tap sizes. Always take into account ±.5mm allowance. 6.Refer to P.462 for tap shank dia. and square dimension. Applications For right-hand thread only. Through hole and blind hole. Feature Quick Change Safety torque clutch actuates to prevent tap breakage when an excessive torque is applied to tap. In this case, a tapping chuck with compression device should be used together. Length Adjustment facilitates your depth control of re-ground tap. N Adjustable length D D D2 L L3 L4 L5 kg Ordering Example SN2B M2J Adapter size Tap size 46
9 Dimension L6 Tapping Capacity Symbol :For JIS (old) Tap For capable tap sizes, please refer to P chart. Metric Thread Tap Dimension Uuified Thread Whit-worth Thread Shank Dia. Φ Square :For Coarse Thread Tap :For light machining on aluminum alloy and the like SN B S B SN B S B SN B S B SN B S B 4 SN B S B 2 SN B S B L6 L6 L6 L6 L6 M3 NO5,NO M4 M4.5 NO M5 M5.5 NO,NO M6 U/4 W/ U5/6 W5/ M8 M M M9 U3/8 W3/ M U7/6 W7/ M U/2 W/ M4 M5 U9/6 W9/ U5/8 W5/ M M M8 U3/4 W3/ M M22 U7/8 W7/ M27 M26 U W M U /8 W / M M32 U /4 W / M M35 M34 U 3/8 W 3/ M36 M Pipe Tap Dimension PT PS PF φ /8 /8 / /4 /4 /
10 Tapping Capacity ANSI Type SB N SNB SB N SNB 2 S2B N2 SN2B 3 S3B N3 SN3B 4 S4B Chuck size Tap size φ d Tap Shank Unit : Inch Drive Square #-6.4. # # # / / #-6.4. # # # / / / / / /8SPT /8LPT / / / / / / / / / / /4PT /8PT.7.53 /2PT / / / / / / /2PT /4PT PT / / / / / / / ISO Type SB N SNB SB N SNB 2 S2B N2 SN2B 3 S3B N3 SN3B 4 S4B d Chuck size Tap size Unit : Metric φ d Tap Shank Drive Square Please contact NT USA for details M M3.5, M M2.5, M M4-, M M4.5, M M5-, M M M M M8-, M M M, M-, M M2, M M M M5-, M M M M M8-, M M M, M-, M M2, M M M M M2, M M M M2, M M M M M2, M M M M3, M M M36, M M42, M M M M3, M M M36, M M42, M
11 Tapping Capacity DIN Type SB N SNB SB N SNB 2 S2B N2 SN2B 3 S3B N3 SN3B 4 S4B Chuck size Tap size Unit : Metric φ d Tap Shank Drive Square M3, M M4, M M5, M6, M M M8, M M3, M M M4, M M5, M6, M M M8, M M M. 8. M4. 9. M3, M M M4, M M5, M6, M M M8, M M M. 8. M4. 9. M M8 4.. M M22, M M M. 8. M4. 9. M M8 4.. M M22, M M27, M M33, M M M22, M M27, M M M33, M M M39, M M45, M JIS Type SB N SNB SB N SNB 2 S2B N2 SN2B 3 S3B N3 SN3B 4 S4B d Chuck size Tap size Unit : Metric φ d Tap Shank Drive Square M M4, M M5, M M M7, M M9, M M M M4, M M5, M M M7, M M9, M M M M M4, M M M7, M M9, M M M M M4, M M M7 3.. M8 4.. M M M4, M M M7 3.. M8 4.. M M M24, M M26, M M M M M M34, M M36, M M M24, M M26, M M M M M M34, M M36, M M39, M M M M
12 Torque Wrench (for right thread) G type Torque Setting Code Model Adapter size (N-m) GS 5 9 G G G G GE4-RD4 4, 25 Setting Shank Setting Socket GS type GW type Oil pressure torque wrench with N-m, divisions. Code Model GS Tapsize 2 9 GS3-M 3 M3 ~ M GS25-M 25 M22 ~ M48.Tap size will be inserted in " ". 2.Square head of setting shank fit into square part of torque wrench. Code Model Adapter size 2 92 GW 2 92 GW GW GW GW GW4 4 Fix square part of setting socket on vise, and then insert tap adapter into it for torque setting. Adjustable Pin Wrench GWA type Code Model Pin diameter Adapter size 5 93 GWA GWA GWA GWA4 6 4 Rotate sled ring of tap adapter by pin wrench for torque adjustment. 465
13 Tap adapter type S B Torque setting Tap adapter type SN B Torque setting by special tool ) Fix square part of setting socket by using vise. 2) Insert tap adapter into the setting socket. 3) Insert the setting shank into the tap adapter. 4) Insert square part of torque wrench into head part of setting shank. 5) Check current torque. 6) When changing torque, remove horn part of ox circlip. 7) Insert adjustable pin wrench into pin hole of sled ring. 8) Rotate sled ring clockwise when increase torque or counterclockwise when decrease torque. 9) Check torque again after setting torque. ) After setting the torque, return horn part of ox circlip to original position to fix sled ring. Torque setting without special tool ) Remove horn part of ox circlip. 2) Insert adjustable pin wrench into pin hole of sled ring. 3) Rotate sled ring clockwise when increase torque or counterclockwise when decrease torque. Sled ring rotation must be 45 ~ 9 4) After setting the torque, return horn part of ox circlip to original position to fix sled ring. 466
14 Guidelines for Torque Value Metric Tap Inch Tap PT Tap PS and PF Taps Tap Size Torque (N-m) Tap Size Torque (N-m) Tap Size Torque (N-m) Tap Size Torque (N-m) M3. /8 2. /8 26. /8 8. M4 2.3 /4 8. /4 35. /4 26. M /6 4. 3/ /8 32. M6 6. 3/8 22. /2. /2 65. M / /4 2. 3/4 9. M8 2. / M9 4. 9/6 52. /4 27. /4 2. M 22. 5/ /8 3. 3/8 22. M 26. /2 3. /2 24. M /4 9. M4 47. M /8 2. M8 82. M M22. /8 22. M /4 25. M / M3 23. /2 36. M /8 58. M /4 63. M /8 75. M4( 細 ) M M M M5( 細 )
KD-NL. Specialized Machine. Quick Change Stub Tapper. Finger collet assembly P Tap Adapter P. 458
KD-NL Quick Change Stub Tapper Designed for use on KD spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KD-NL in a condition where the tension feature always works
More informationKTLP. Specialized Machine. Quick Change Stub Tapper. Ordering Example KTLP Tap Adapter P. 458 F1 + F2=13. (Sold separately)
KTLP Quick Change Stub Tapper Applications Designed for use on special-purpose machine, transfer machine etc. Spindle Feed : All kinds of feed styles. For spindle feeds other than pitch feed, use a tapping
More informationTool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING
Tool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING SynchroFlex Tapping Attachment with unique Double Flexure Unlike other synchronous tap drivers that use soft plastic components
More informationTechnical. Scan this QR Code Featured Video
Scan this QR Code Featured Video 223 Lyndex-Nikken Product Warranty Standard Product Lyndex-Nikken Inc., the seller, warrants to the user, who purchases and uses (the User ) the Standard Product, as hereinafter
More informationMACHINE TOOL ACCESSORIES
MACHINE TOOL ACCESSORIES ISO TOOLHOLDERS FOR CNC ROUTERS 33-70 Note: Measure the A dimension with the collet in the nut. Dimensions in Millimeters COLLET PULL STUD DESCRIPTION D A F N NUT WRENCH PROVIDED
More informationExpansible Tapping Holder
Expansible Tapping Holder Floating and expansion design will reducte the differential of motor rotary speed and feeding speed so will extend the life of tap. Use ER High Spring Collet, you don t need to
More informationFixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA42MSY is able to handle complex machining, with short cycle times
More informationT E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
More informationCAPTO. Switzerland. Made in. Swiss Precision Tools
CAPTO Made in Switzerland Swiss Precision Tools REGO-FIX CAPTO Toolholders As a Certified Sandvik CAPTO manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most
More informationT E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
More informationCLAMSHELL PIPE CUTTING AND BEVELLING MACHINES. Mactech Europe LTD
CLAMSHELL PIPE CUTTING AND BEVELLING MACHINES Mactech Europe LTD Mactech s Clamshell lathes are portable pipe cutting machines designed for on-site precision severing, severing/beveling, and severing/double
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationRadiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
More informationKMH KMH1000/1250 HORIZONTAL MACHINING CENTERS
KMH KMH1000/1250 HORIZONTAL MACHINING CENTERS Index Cover 01 Cover Contents 02-03 Table of Contents Structure 04-07 Design & Rigidity 08-09 Main Sub-System 10 High Accuracy Inspection 11 Wash Down System
More informationMODEL R-502 ROUTER ITEM NO PART NO DESCRIPTION PRICE
1 6520038 CORD ASS'Y 1.5 X 2 X 2.5 FOR GBR (110V) 11.98 6520571 CORD ASS'Y 1 X 2 X 2.5 FOR GBR (240V) 13.98 6520025 CORD ASS'Y 1 X 2 X 2.2 EXCEPT ABOVE 13.79 2 6560044 CORD HOLDER 10 0.69 3 6560057 CORD
More information72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
More information651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD
600 SOCKET HEAD CAP SCREWS 602 SOCKET SET SCREWS Page...........596602 Page.......................603 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS 615
More informationCompact pressure switch for multiple actuators
Comct pressure switch for multiple actuators GW A GW A/.0 Printed in Germany Edition 0.0 Nr. 90 Technical description The GW A pressure switch is a comct pressure switch as r EN 8 for DUNGS multiple actuators.
More information410 Chain Saw UT B Page 1 of 10 Engine & Peripherals
410 Chain Saw UT-10486-B Page 1 of 10 Engine & Peripherals 410 Chain Saw UT-10486-B Page 2 of 10 Engine & Peripherals 1 82253 3 /P SCREW- Pan hd. (8-32 x 3/8") 2 93628 1 /P COVER- Clutch 3 93639 1 S SPIDER-
More informationCOBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c
COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................
More informationHigh Torque Type Ball Spline
58-1E Models LBS, LBST, LBF, LBR and LBH Seal Spline shaft Spline nut Ball Retainer Snap ring Fig.1 Structure of Model LBS Point of Selection Point of Design Options Precautions on Use Accessories for
More informationRA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
More informationTel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.. / 00..0 (USA & CANADA) / Email sales@msdiscounttool.com FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute
More informationCOLLETS. DESCRIPTION DIN 6388 COLLETS Form A For plain straight shank tools QUICK CHANGE TAPPING. ADAPTERS Bilz type. Positive drive adapters
COETS ESCRIPTION Page ESCRIPTION Page IN 88 COETS Form A For plain straight shank tools 5 QUICK CHANGE TAPPING AAPTERS Bilz type Positive drive adapters 2 IN 88 COETS Form E For threaded straight shank
More informationSocket Head Cap Screw Metric
1 2 0 0 M2 WRENCH 1.mm 11 1 1 1 1 21 0 Pcs 1, 0 0 0 00 00 00 00 00 00 00 00 WRENCH 2mm 11 1 1 1 0 Pcs 0 0 0 00 00 00 00 00 WRENCH 2.mm 21 002 11 00 00 1 0 01 21 002 000 0 Pcs 1 0 2 0 00 00 00 00 00 00
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationDrilling Machine. Presenter: G. Tulloch
Drilling Machine Presenter: G. Tulloch Drilling machine A power operated machine tool which holds the drill in its spindle rotating at high speeds and when actuated move linearly against the work piece
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More information7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
More informationContents. Page 2 TRCTFP101
Contents CHAINS SPZ-SPA-SPB-SPC Profile Selection 3 Taper Bore SPZ 4-7 Taper Bore SPA 8-10 Taper Bore SPB 11-14 Taper Bore SPC 15-17 Taper Bushes 18-19 Taper Bushes - Metric 20-23 Taper Bushes - Imperial
More informationRD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute Flute Overal Spiral Size Length Length Flute / / / 00 00 / / / 00 00 / / 00 000 / / 00 000
More informationBurs Toolholders Toolholders. CAT40 ER20 Collet Chucks, Straight Shank. Collet Extension and Parts. CAT40 ER25 Collet Chucks, Straight Shank
Table of Contents Burs 386 394 408 Cylindrical End Cut SB, Uncoated CAT40 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Jacobs Taper Holders and Parts 387 395 409 Cylindrical Ball
More informationLIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1
Model ROTARY HAMMER LIST F409 (E1) 2009 9 7 22% TU01658 DH28PD Rev.1 113 1 2 3 4 5 6 7 8 9 10 11 14 15 16 20 21 17 18 22 23 24 25 29 27 30 31 19 32 33 34 35 36 37 38 62 63 64 67 68 69 65 66 70 71 72 73
More informationA-dec 586 Ceiling Monitor Mount
Installation Guide A-dec 586 Ceiling Monitor Mount Recommended Tools 7/16" wrench Socket set and ratchet with 6" extension Phillips head and standard screwdrivers Diagonal cutters Level 3/8" drill with
More informationDN100 (4") - DN500 (20") Hot Tappings
DN00 (4") - DN500 (20") Hot Tappings TONISCO B40 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN00 DN500 by completing it with proper adapters.
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationLIST NO. F423 ROTARY HAMMER (E1) Model DH 28PMY
Model ROTARY HAMMER LIST F423 2014 4 2 (E1) A A 5 6 7 8 9 17 18 19 20 21 22 23 11 13 14 15 12 24 25 26 27 28 29 30 31 32 33 34 35 36 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
More information4 IMPACT SOCKETS, BITS
IMPACT SOCKETS, BITS IMPACT SOCKETS, ADAPTOS AND SETS PAGE 58 BITS AND ACCESSOY TOOS PAGE 66 IMPACT DIVE AND SET PAGE 7 IMPACT Sockets, Machine actuated IMPACT Sockets, Machine actuated. STAHWIE IMPACT
More informationSno-Thro. Parts Manual. Models (SS522EC) (SS722EC) (SS522) (SS522EC) (SS722C) /06 Printed in USA
Sno-Thro Parts Manual Models 801 (SSEC) 8018 (SSEC) 801 (SS) 8 (SSEC) 80 (SSC) 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.
More informationASI Systems ML5720A Series
ML5720A Series Electric Linear Valve Actuators Non-Spring Return APPLICATION The ML5720A series actuators operate standard ASI Systems valves in heating, ventilating and air conditioning (HVAC) applications.
More informationPIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
More informationKA3-6VS 300mm KA3-6VS 400mm Vertical Spindle
Vertical KA3-6VS 300mm KA3-6VS 400mm Vertical Spindle The Kira KA3- Series of traveling column (3) Axis CNC Machining Modules are an excellent choice for special application machine builders. These modules
More informationThis is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
More informationTrue Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationVariable Stroke Straight-Line Action
4. FO Series FL Series G Series Type of Mounting: Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and (two-handed operation) Type of Mounting: Type of Actuation: Locking
More information2.4.7 Tapping with compensating chuck - CYCLE840
2.4.7 Tapping with compensating chuck - CYCLE840 Programming CYCLE840 (RTP, RFP, SDIS, DP, DPR, DTB, SDR, SDAC, ENC, MPIT, PIT, AXN) Parameters Parameter Data type Description RTP REAL Retraction plane
More informationTaps - DIN High Performance Tap Range - M, MF - UNC, UNF, UN - G (BSPF) - NPT
Taps Taps - DIN High Performance Tap Range -, F - UNC, UNF, UN - G (BSPF) - NPT Taps Finder - For Synchro Tapping Page Synchro Gun Synchro Gun, IK Synchro Spiral Flute, R50 Synchro Spiral Flute, R50, IK
More informationParts Manual Kleen Sweep 32R Rider Sweeper
Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part
More informationYOUR DRILLING EXPERT EXPLORATION & GRADE CONTROL. wwww.halcorocktools.com
YOUR DRILLING EXPERT EXPLORATION & GRADE CONTROL wwww.halcorocktools.com OUR COMMITMENT TO YOU At Rock Tools we pride ourselves on exemplary levels of customer service, support and training to reflect
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More information8100, 8200, , 8202, 8203, 8204, 8205, 8206
800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT
More informationSolaris+ User Manual V1.0 Tel: +49 (0)
User Manual G-LEC Solaris+ User Manual To avoid danger, you should read this user manual thoroughly before use of the product This product is for professional use only and not designed for home or residential
More informationZ-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly
Replacing the LCD Cable To remove and replace the LCD Cable you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) Socket wrench with 10mm socket Removing the Side Panel 1.
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationCORDLESS SYSTEMS. Hilti. Outperform. Outlast.
CORDLESS SYSTEMS. Hilti. Outperform. Outlast. Cordless Systems with Ll-Ion SFC 14-A Page 067 Accessories and Consumables Page 068 SFH 22-A Page 069 SID 14-A Page 070 Accessories Page 071 SIW 14-A Page
More informationOnline version - not for reprint
(0) A Crankcase, Cylinder... X Tools, Extras... B Rewind starter... C Rewind starter ErgoStart... D Muffler... E Ignition system, Clutch... F Engine housing (Wrap around handle)... G Engine housing (Wrap
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E478 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2004 5 30 (E1) 1 2 3 4 5 6 23 24 7 8 9 10 25 26 17 18 27 28 29 30 31 32 33 34 11 35 12 36 13 14 37 38 15 16 19 20 21 22 54 55
More informationASSET LGA1366 Top-side Probe
ASSET LGA1366 Top-side Probe (Manual version 1.1) For gaining test access to the debug port of Intel processors that are designed for use in LGA1366 Sockets (Socket B). These include the Intel Core i7
More informationROTARY HAMMER Model DH 26PC
LIST F418 ROTARY HAMMER Model 2013 5 22 (E1) 1 2 18 19 20 3 4 5 6 21 22 7 8 53 23 24 25 26 27 A 28 29 30 31 11 32 12 33 34 13 35 14 36 15 24 37 16 17 9 A 10 54 41 64 65 55 56 57 58 59 60 42 43 44 45 46
More informationLIST NO. F421 ROTARY HAMMER (E1) Model DH 24PH
Model ROTARY HAMMER LIST F421 2013 5 22 (E1) A 29 73 1 2 3 4 5 6 7 17 8 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 A 501 502 503 38 39 9 24 17 40 41 42 43 44 45 46 47
More informationPolar coordinate interpolation function G12.1
Polar coordinate interpolation function G12.1 On a Turning Center that is equipped with a rotary axis (C-axis), interpolation between the linear axis X and the rotary axis C is possible by use of the G12.1-function.
More informationARES 30. Overall dimensions: A (mm) B (mm) C (mm) Kg
ARES 30 Numerically controlled copy router with -90, 0, +90 section rotation for working on 3 sides and quik release spinale for ISO 30 cone. Z axis manual down-feed with dimension display. The machine
More informationROC T15 Technical specification
Atlas Copco Surface drill rigs ROC T15 Technical specification When small holes are big business is the smallest hydraulic drill rig in our range. It is perfect for small construction jobs, self-drilling
More informationRotary Ball Spline. With Support Bearing Type Models LTR and LTR-A
With Support Bearing Type Models LTR and LTR-A Outer ring Ball Flange outer ring Seal Seal Retainer Spline nut Spacer Retainer Spline shaft Fig.1 Structure of Model LTR Point of Selection Point of Design
More informationMASTER CATALOG KCPM45.
MASTER CATALOG KCPM45 KSEM Modular Drills KCPM45 Your New Grade for Tough Jobs in Low-Carbon Steel KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating.
More informationRedexim-Charterhouse Verti-Drain 7316 pag 01 code 0401
Redexim-Charterhouse Verti-Drain 7316 pag 01 code 0401 1 4191100 Winged nut 10 2 4100800 Self lock nut M6 10 3 2282183 Bottom PTO protection cover 1 4 4001030 Bolt M6 x 16 10 5 2281782 Top PTO protection
More informationASI Systems ML5740A Series
ML5740A Series Electric Linear Valve Actuators Non-Spring Return APPLICATION The ML5740A series actuators operate standard ASI Systems valves in heating, ventilating and air conditioning (HVAC) applications.
More informationAiretool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationSide block mm Combination element to extend or to combine two stoppers
Clamping tools 45 5D workpiece stopper Side block 10-18 mm Combination element to extend or to combine two stoppers Application: One of the various application of the workpiece stopper is as a versatile
More informationTool holder for rigid tapping Accessories MGT Set Screw MGT6SS MGT12SS CATALOG No. MGT20SS Synchro Adjuster Compensates
Tool holer for rigi tapping icense CATAOG No. Compensates for synchronization errors uring rigi tapping Improves threa quality an tool life by reucing thrust loas cause by synchronization errors up to
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More informationBTL. Taper bushing A. PLATE SPROCKET REBORE TO "G"DIMENSION. WELD TAPER WELD. ON HUB TAPER SPROCKET
is a new type of component used for joining mechanical transmission. It changed from the traditional design and now features easy-on, easy-off construction and high standardization. The grip is tightened
More informationToolholders & Accessories
Toolholders & Accessories Contact us for a fast quote. USA Headquarters 364 email: sales@napgladu.com (800) 457-7468 Canada, Montreal (800) 363-9117 Canada, Toronto (888) 251-2236 Table of Contents Toolholders
More informationSpindles Screws. 9b Overview. FSB Stabil-spindle. FSB Stabil-half-spindle. Accessories Stabil-spindle. FSB Special spindle. Accessories.
Spindles Screws 9b Overview FSB Stabil-spindle FSB Stabil-half-spindle Accessories Stabil-spindle FSB Special spindle Accessories Screws 544 545 546 548 549 550 552 543 Overview 0103 Page 546 0104 Page
More informationFAGOR AUTOMATION MC TRAINING MANUAL
FAGOR AUTOMATION MC TRAINING MANUAL ACER MC TRAINING MANUAL 8 holes 1/2" depth grid pattern R0.125 1.5 6 unit: inch R0.25 4 1.25 2 2.675 1/2" depth rectangular pocket 1/2" depth circular pocket R0.75 8
More informationMetal-Max - Standard Ballnose. Metal-Max - Standard Length. Now available as a coolant thru cutter! AlTiN. AlTiN. MTMXB - Std.
2007 Catalog INDEX 4 Metal-Max - 4FL - Standard Length 5 Metal-Max - 4FL - Ballnose Standard Length 6 Metal-Max - 4FL - Stub, Long & Long-reach length 7 Metal Max - Square Corner - Speeds Chart 8 Metal
More informationInch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
More informationTrigonometry Tables and Handy References for Engineers
$1 Trigonometry Tables and Handy References for Engineers No matter what angle you figure... Carr Lane is your best answer for jig-and-fixture components! AUTHORIZED DISTRIBUTOR A-L Tool Supply P.O. Box
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More informationCOMPUTER NUMERICAL CONTROL OF MACHINE TOOLS
COMPUTER NUMERICAL CONTROL OF MACHINE TOOLS Department of Mechanical Engineering and Aeronautics University of Patras, Greece Dr. Dimitris Mourtzis Associate professor Patras, 2017 1/52 Chapter 8: Two
More informationELECTRIC TOOL PARTS LIST
LIST E438 ELECTRIC TOOL PARTS LIST HAMMER DRILL Model 2000 9 29 (E2) 27A 44 45 46 35A 32A 501 502 503 504 72A --- 1 --- PARTS --- 2 --- 1 306-345 FRONT CAP 1 2 306-992 GRIP 1 3 306-343 BALL HOLDER 1 4
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationsecurity fasteners for every application
security fasteners for every application Welcome to Hafren 2 Specifying & Ordering Hafren Security Fasteners 5 2-Hole Screws 6 Pin Hex Screws 8 6-Lobe Pin Screws 10 6-Lobe Pin Self Drilling Screws 12 6-Lobe
More informationCutting devices, longitudinal 5
Cutting devices, longitudinal 5 SM-120 Multisystem Belt/tape width max. mm 120 inch 4.7 Cutting width per operation mm 120 inch 4.7 Belt/tape thickness max. mm 5 inch 0.2 Electric power supply V 3 230/400
More informationGE FANUC 21 CONCEPT 55 TURN TEACHER GUIDE
GE FANUC 21 CONCEPT 55 TURN TEACHER GUIDE 2/13/08 Version 2 Made by EMCO Authored by Chad Hawk Training Index Control Keyboard Pg 1 Fanuc 21 Control Machine Control Fanuc 21 Screen Pg 2 Fanuc 21 Keys Pg
More informationTurning ISO Dialect T
SINUMERIK 802D Short Guide 09.2001 Edition Turning ISO Dialect T User Documentation SINUMERIK 802D Turning ISO Dialect T Short Guide 09.2001 Edition Valid for Control Software Version SINUMERIK 802D 1
More informationStandard Releasing Spear. Manual B215
Standard Releasing Spear Manual B215 NOTES Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type
More informationPage 3. Page Page 4. Page 5. Page 6. Page 2. Page 7
Parts manual Verti-Drain 416 Page 01 Code 1640 TM Page 3 Page -10 Page 4 Page Page 6 Page 2 Page Page 8 Page : PTO Page : Tines, adapters and turf hold down kits Page 13: Optional core collector Page
More informationKF to CFF Adapters. Samho Syscom Ent. / Varian, Inc. Vacuum Technologies. Outline Drawing
KF to CFF Adapters Ordering Information KF to CFF Adapters CFF Part CFF KF Flange Overall Length Tube ID Shipping Size Number OD NW Size OD A in. (mm) B in. (mm) Weight lbs. (kg) in. FA0NW6S. NW6.8.57
More informationSeries VH Hydraulic Cylinders
Series VH Series VH very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationRing End * Ring End supplied 5/ / /32-5/ / / /16-3/
Torque Accessories Torque Wrench End Fittings Captive Pin Type Metric & Imperial Accessories compatible with TBN Preset Breaking Torque Wrenches, Models TBN 2 & 0 (see page8) Open End Ring End * Ring End
More informationRack Installation Guide
Rack Installation Guide This document provides important information about the Toolless Slide Rail and the Toolless Slide Rail Kit with 1U/2U MA. Each slide rail kit package contains the following items:
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
More information