Burs Toolholders Toolholders. CAT40 ER20 Collet Chucks, Straight Shank. Collet Extension and Parts. CAT40 ER25 Collet Chucks, Straight Shank

Transcription

1

2 Table of Contents Burs Cylindrical End Cut SB, Uncoated CAT40 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Jacobs Taper Holders and Parts Cylindrical Ball Nose SC, Uncoated CAT40 ER25 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Morse Taper Holders Egg Shape SE, Uncoated CAT40 ER32 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Tooling Packages Ball Shape SD, Uncoated CAT40 ER40 Collet Chucks, Straight Shank Collet Extension and Parts CAT50 Series 388 Pointed Tree Shape SG, Uncoated 389 Round Nose Tree SF, Uncoated 389 Flame Shape SH, Uncoated 390 Included Angle with Radius End SL, Uncoated CAT40 TG100 Series Collet Chucks and Parts 399 CAT40 TG150 Series Collet Chucks and Parts 400 CAT40 Endmill Holders and Parts 402 CAT40 Facemill Holders and Parts CAT50 ER16 Collet Chucks, Straight Shank Collet Extension and Parts CAT50 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT50 ER25 Collet Chucks, Straight Shank Collet Extension and Parts CAT50 ER32 Collet Chucks, Straight Shank Collet Extension and Parts Table of Contents Pointed Cone SM, Uncoated CAT40 Rigid Tap Holders and Parts CAT50 ER40 Collet Chucks, Straight Shank Collet Extension and Parts Burs Technical Information Contains information on Speeds & Feeds CAT40 Tension & Compression Tap Holders and Parts CAT50 TG100 Series Collet Chucks and Parts CAT40 Series CAT40 Boring Head Holders CAT50 TG150 Series Collet Chucks and Parts CAT40 ER11 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Stub Arbor Holders and Parts CAT50 Endmill Holders and Parts CAT40 ER16 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Slitting Saw Holders and Parts CAT50 Facemill Holders and Parts 7

3 Table of Contents Specialty Tools CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key Cutters CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid Carbide Key Cutters CAT50 Boring Head Holders TG150 Collets Carbide Head Key Cutters 1/2" Steel Shank CAT50 Stub Arbor Holders and Parts Bilz Tap Collets Carbide Head Key Cutters 3/8" Steel Shank Table of Contents CAT50 Slitting Saw Holders and Parts CAT50 Jacobs Taper Holders, Drill Chucks & Parts CAT50 Morse Taper Holders CAT40 & CAT50 Accessories Retention Knobs for Standard and Coolant Thru Vertical/Horizontal Setup Holding Fixture ER16 Coolant Seals ER20 Coolant Seals Carbide 15 Dovetail Cutters Carbide 30 Dovetail Cutters Carbide 45 Dovetail Cutters Carbide 60 Dovetail Cutters ER11 Collet Sets and Collets ER25 Coolant Seals Chamfer Mills NEW Products 459 ER16 Collet Sets and Collets ER32 Coolant Seals Carbide 2-Flute, Chamfer Mills for Aluminum, Single End NEW Products 460 ER20 Collet Sets and Collets ER40 Coolant Seals Carbide 4-Flute, Chamfer Mills for Steel, Single End NEW Products 461 ER25 Collet Sets and Collets TG100 Series Coolant Seals Carbide 2-Flute, Chamfer Mills for Aluminum, Double-End 436 NEW Products 462 ER32 Collet Sets and Collets Carbide 4-Flute Chamfer Mills for Steel, Double-End 8

4 CAT40 CAT40 ER11 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER11 Collets found on page 429 CAT40 ER11 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC4ER V ft lbs RC4ER ER11 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER11 Parts & Accessories Description Photo Dimensions Part # Item # ER11 Replacement Nosepiece RER11NPA 4 ER11 Collet Wrench RER11W 5 Required for assembly. Required for assembly

5 CAT40 CAT40 ER16 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER16 Collets found on pages CAT40 ER16 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER ER16 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER16 Parts & Accessories Description Photo Dimensions Part # Item # ER16 Replacement Nosepiece RER16NPA 5 ER16 Collet Wrench RER16W 6 ER16 Stop Screw RER16SS 7 ER16 Stop Screw Coolant Thru RER16SSC 8 Required for assembly

6 CAT40 CAT40 ER20 Collet Chucks (balanced to RPM) Standard Style Tapered Style* (denoted with "T" at end of part number) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-to-spindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER20 Collets found on pages CAT40 ER20 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER2060T V ft lbs RC4ER NOTE: "T" in part number stands for Tapered Body. ER20 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER20 Parts & Accessories Description Photo Dimensions Part # Item # ER20 Replacement Nosepiece RER20NPA 7 ER20 Collet Wrench RER20W 8 ER20 Stop Screw RER20SS 9 ER20 Stop Screw Coolant Thru RER20SSC 10 Required for assembly

7 CAT40 CAT40 ER25 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER25 Collets found on pages CAT40 ER25 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER ER25 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER25 Parts & Accessories Description Photo Dimensions Part # Item # ER25 Replacement Nosepiece RER25NPA 5 ER25 Collet Wrench RER25W 6 ER25 Stop Screw RER25SS 7 ER25 Stop Screw Coolant Thru RER25SSC 8 Required for assembly

8 CAT40 CAT40 ER32 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER32 Collets found on pages CAT40 ER32 Collet Chucks Standard D (Max Tool Depth) 1.57 *Extra-stubby L B Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V * ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER *NOTE: Extra-Stubby ER32 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER32 Parts & Accessories Description Photo Dimensions Part # Item # ER32 Replacement Nosepiece RER32NPA 7 ER32 Shorty Replacement Nosepiece RER32SNPA 8 ER32 Collet Wrench RER32W 9 ER32 Shorty Wrench 1.75 RER32SW ER32 Stop Screw RER32SS 11 ER32 Stop Screw Coolant Thru RER32SSC 12 Required for assembly

9 CAT40 CAT40 ER40 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER40 Collets found on pages CAT40 ER40 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC4ER V ft lbs RC4ER V ft lbs RC4ER ER40 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER40 Parts & Accessories Description Photo Dimensions Part # Item # ER40 Replacement Nosepiece RER40NPA 5 ER40 Collet Wrench RER40W 6 ER40 Stop Screw RER40SS 7 ER40 Stop Screw Coolant Thru RER40SSC 8 Required for assembly

10 CAT40 CAT40 TG100 Collet Chucks The key reason for the RedLine Collet Systems' accuracy and gripping power is a unique flush nut design. It incorporates a rotating ball assembly producing a radial float. This forces the collet to self-center for maximum grip, highest precision, and minimum tool wear. Flexibility to mill, drill, and ream AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance TG100 Collets found on pages CAT40 TG100 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC4TG V ft lbs RC4TG V ft lbs RC4TG V ft lbs RC4TG TG100 Series Parts & Accessories Description Photo Dimensions Part # Item # TG100 Replacement Nosepiece RTG100NPA 5 TG100 Wrench RTG100W 6 TG100 Stop Screw RTG100SS 7 TG100 Stop Screw Coolant Thru RTG100SSC 8 Required for assembly

11 CAT40 CAT40 TG150 Collet Chucks The key reason for the RedLine Collet Systems' accuracy and gripping power is a unique flush nut design. It incorporates a rotating ball assembly producing a radial float. This forces the collet to self-center for maximum grip, highest precision, and minimum tool wear. Flexibility to mill, drill, and ream AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance TG150 Collets found on pages Capacity Taper A CAT40 TG150 Collet Chucks Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC4TG TG150 Series Parts & Accessories Description Photo Dimensions Part # Item # TG150 Replacement Nosepiece RTG150NPA 2 TG150 Wrench RTG150W 3 TG150 Stop Screw RTG150SS 4 TG150 Stop Screw Coolant Thru RTG150SSC 5 Required for assembly

12 CAT40 CAT40 Endmill Holders Holders through 1.000" accept double end cutters (except as noted) therefore save on tool costs Fine thread screws match Weldon flats lock tight, stay tight AT3 or better shank taper allows for accurate, rigid toolholderto-spindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance All tapers and lengths are ready to ship so you can get your tools fast Standard Style Tapered Style* (denoted with "T" at end of part number) Standard Style CAT40 Endmill Holders - Fractional Taper Size A Gage Lgth (B) C D F F1 L Part # Item # V40 1/ RC4EM V40 1/ RC4EM V40 1/ RC4EM V40 3/ RC4EM V40 3/ RC4EM V40 1/ RC4EM V40 1/ RC4EM V40 1/ RC4EM V40 5/ RC4EM V40 3/ RC4EM V40 3/ RC4EM V40 3/ RC4EM V40 3/ RC4EM T 13 V40 7/ RC4EM V40 1/ RC4EM V40 1/ RC4EM V40 1/ RC4EM V40 1/ RC4EM V40 9/ RC4EM V40 5/ RC4EM V40 5/ RC4EM V40 5/ RC4EM V40 3/ RC4EM V40 3/ RC4EM V40 3/ RC4EM V40 7/ RC4EM V40 7/ RC4EM V RC4EM NOTE: "T" in part number stands for Tapered Body

13 CAT40 Fr o m Taper Size A Gage Lgth (B) C D F F1 L Part # Item # V RC4EM V40 1-1/ RC4EM V40 1-1/ RC4EM V40 1-1/ RC4EM V40 1-1/ RC4EM V40 1-1/ RC4EM Taper CAT40 Endmill Holders - Metric (see page 285 for dimensions) Size A Gage Lgth (B) C D F L Part # Item# V40 6MM RC4EMM V40 8MM RC4EMM V40 10MM RC4EMM V40 12MM RC4EMM Holder Size Endmill Holder Replacement Lock Screws Screw Thread Size Max. Torque (ft lbs) Photo Part # Item # 1/ x RC4EMLS / x RC4EMLS /4 1/4-28 x RC4EMLS /16 5/16-24 x RC4EMLS /8 3/8-24 x RC4EMLS /16 3/8-24 x RC4EMLS /2 7/16-20 x RC4EMLS /16 7/16-20 x RC4EMLS /8 1/2-20 x REMLS /4 5/8-18 x REMLS /8 5/8-18 x REMLS /4-16 x REMLS /4 3/4-16 x REMLS /2 3/4-16 x REMLS MM M6-1.0 X REMLS06MM 25 8MM M X REMLS08MM 26 10MM M X REMLS10MM 27 12MM M X REMLS12MM

14 CAT40 CAT40 Facemill Holders Pilot diameter is sized for precision fit with cutter Face perpendicular to center line within.0002" Removable/replaceable drive keys are standard Fine thread locking screw is included AT3 or better shank taper allows for accurate, rigid toolholder-to-spindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance CAT40 Facemill Holders Taper Size A Gage Lgth (B) C L Part # Item # V40 1/ RC4SM V40 1/ RC4SM V40 3/ RC4SM V40 3/ RC4SM V RC4SM V RC4SM V40 1-1/ RC4SM V40 1-1/ RC4SM V40 1-1/ RC4SM V40 1-1/ RC4SM Facemill Holder Replacement Lock Screws Holder Size Size A B C D Photo Dimensions Part # Item # 1/ / RSMLS B 3/ / Thread D A RSMLS Size / RSMLS / / RSMLS / / C RSMLS Facemill Holder Replacement Drive Keys Holder Size Size A B Photo Dimensions Part # Item # 1/2 1/4 1/8 RSMDK /4 5/16 5/32 A B RSMDK /8 3/16 RSMDK /4 1/2 1/4 RSMDK /2 5/8 5/16 RSMDK Note: Drive keys are in line with drive slot

15 CAT40 CAT40 Rigid Tap Holders Rigid synchronous system for machine controls with 32 bit microprocessors Extended lengths available for horizontal machining centers Uses popular Bilz style quick-change collet system (see page 444) CAT40 Shank Straight Shank CAT40 Rigid Tap Holders Taper Collet Size Gage Lgth (B)* C L Part # Item # V40 # RC4THR V40 # RC4THR V40 # RC4THR V40 # RC4THR * The B dimension is the assembled length including standard tap collet CAT40 Straight Shank Rigid Tap Holders Shank Type Collet Size B* C Part # Item # SS # RSSTHR SS # RSSTHR * The B dimension is the assembled length including standard tap collet 403

16 CAT40 CAT40 Tension & Compression Tap Holders Tension & Compression style has axial float for precise thread pitch Holders travel in tension.75"/compression.37" Uses popular Bilz style quick-change collet system (see page 444) A 6.0 C B (Assembled with Standard Tap Collet) CAT40 Shank Straight Shank CAT40 Tension & Compression Tap Holders Taper Collet Size Gage Lgth (B)* C L Part # Item # V40 # RC4THT V40 # RC4THT * The B dimension is the assembled length including standard tap collet Straight Shank Tension & Compression Tap Holders Shank Type Collet Size A B* C Part # Item # SS # RTHSST SS # RTHSST * The B dimension is the assembled length including standard tap collet 404

17 CAT40 CAT40 Boring Head Holders AT3 or better shank taper accurate, rigid toolholder-to-spindle mount Less tool wear and replacement less scrap Fully ground flange and V-groove easy on the tool changers for less spindle and changer maintenance All tapers and lengths ready to ship get your tools fast CAT40 Boring Head Holders Taper Fits Boring Head Thread L Part # Item # V40 SPI, Yuasa, Criterion 7/ RC4BH V40 SPI, Yuasa, Criterion 1 1/ RC4BH

18 CAT40 CAT40 Stub Arbor Holders Pilot thread is ground concentric to the tapered shank Face is perpendicular to center line within.0002" Pilot diameter is sized for precision fit with cutter and is keyed for positive drive Heavy duty locking nut and three arbor spacers are included - 1/4", 3/8", 3/4" Taper Saw ID Size CAT40 Stub Arbor Holders Gage Lgth (B) C D L Part # Item # V RC4SA V RC4SA Stub Arbor Holder Replacement Parts & Accessories Description Part # Item # Nut for 1" Stub Arbor Holder R1000SAN 3 Key for 1" Stub Arbor Holder with 1/4" Square Key RSAK /4" Spacer for 1" Stub Arbor Holder RSAH100SP /8" Spacer for 1" Stub Arbor Holder RSAH100SP /4" Spacer for 1" Stub Arbor Holder RSAH100SP Nut for 1-1/4" Stub Arbor Holder R1250SAN 8 Key for 1-1/4" Stub Arbor Holder with 5/16" Square Key RSAK /4" Spacer for 1-1/4" Stub Arbor Holder RSAH125SP /8" Spacer for 1-1/4" Stub Arbor Holder RSAH125SP /4" Spacer for 1-1/4" Stub Arbor Holder RSAH125SP

19 CAT40 CAT40 Slitting Saw Holders Semi-flush nose cap gets in tight areas Change saw width without spacers Face is held perpendicular to center line within.0002" Pilot diameter is sized for precision fit with cutter and is keyed for positive drive Designed for slitting saws up to 5/16" thick wider cutters use Stub Arbor Holder CAT40 Slitting Saw Holders Taper Cutter Size ID Gage Lgth (B) C L Part # Item # V RC4SS V RC4SS Slitting Saw Holder Replacement Parts & Accessories Description Part # Item # Cap for 1" Pilot Holder RSSC Drive Key for 1" Pilot Holder RSSDK Cap for 1-1/4" Pilot Holder RSSC Drive Key for 1-1/4" Pilot Holder RSSDK

20 CAT40 CAT40 Jacobs Taper Holders Precision ground Jacobs pilot Jacobs taper held to better than.0002" accuracy for best mating with the drill chuck Notes: Not for high speed use. Must be cleaned before use and degreased for proper assembly. CAT40 Jacobs Taper Holders Taper Jacobs Taper Gage Lgth (B) C L Part # Item # V40 # RC4JT V40 # RC4JT V40 # RC4JT V40 # RC4JT V40 # RC4JT V40 # RC4JT Jacobs High Precision Keyless Chucks Model Capacity Taper Photo Part # Item # JKP 65-J #1 J.T JKP 80-J2S #2 J.T JKP 100-J #33 J.T JKP 130-J #2 J.T Jacobs High Precision Key Type Chucks Model Capacity Taper Photo Part # Item # 11N #2 J.T N #3 J.T N #3 J.T N #4 J.T Jacobs Drill Chuck Replacement Key Chuck # Model Part # Item # 11N K N K N K N K

21 CAT40 CAT40 Morse Taper Holders Precision ground Morse taper Morse taper pocket held to.0002" accuracy for the best locking fit of the Morse shank AT3 or better shank taper results in accurate, rigid toolholder-to-spindle mount Less tool and wear replacements means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Notes: Not for high speed use Must be cleaned before use and degreased for proper assembly Not to be used with coolant thru the spindle CAT40 Morse Taper Holders Taper Morse Taper Gage Lgth (B) C L Part # Item # V40 # RC4MT V40 # RC4MT V40 # RC4MT

22 CAT40 Two RedLine tooling packages have been created that include all the tools you'll need to get your machine going. The Standard package includes 14 toolholders, 2 sets of ER Collets and 1 set of Tapping Collets. The Basic package includes 10 toolholders and 1 set of ER Collets. Standard Tooling Package Description Photo Part # Item # Standard Tooling Package* For Coolant-Through Machines (list of tools is included below) RC4PKG01C 1 Standard Tooling Package* For Non-Coolant- Through Machines (list of tools is included below) RC4PKG01 2 Qty Description 1 CAT40 1/4" Endmill Holder (RC4EM ) 1 CAT40 3/8" Endmill Holder (RC4EM ) 1 CAT40 1/2" Endmill Holder (RC4EM ) 1 CAT40 5/8" Endmill Holder (RC4EM ) 1 CAT40 3/4" Endmill Holder (RC4EM ) 1 CAT40 1" Endmill Holder (RC4EM ) 3 CAT40 ER20 Collet Chucks (RC4ER20255) 1 ER20 Standard 12 Piece Inch Collet Set ( ) 1 ER20 Collet Chuck Wrench (RER20W) Qty Basic Tooling Package Description 2 CAT40 ER32 Collet Chucks (RC4ER32270) 1 ER32 Standard 13 Piece Inch Collet Set ( ) 1 E32 Collet Chuck Wrench (RER32W) 1 CAT40 3/4" Facemill Holder (RC4SM ) 1 CAT40 #1 Bilz Style Rigid Tap Holder (RC4THR01358) 1 12 Piece #1 QC Tap Collet Set 0-9/16 ( SET) 1 CAT40 #2 Jacobs Taper Holder (RC4JT02150) 1 Jacobs Keyless Chuck #2, Capacity (9683) 14 Haas CAT40 Retention Knobs (RC4HRK) OR Haas CAT40 Coolant through Retention Knobs (RC4HRKC) * NOTE: If this package is purchased for a Non-Haas machine, please specify, so that the correct retention knobs can be supplied. Description Photo Part # Item # Basic Tooling Package* For Coolant-Through Machines (list of tools is included below) RC4PKG02C 3 Basic Tooling Package* For Non-Coolant-Through Machines (list of tools is included below) RC4PKG02 4 Qty Description 1 CAT40 1/4" Endmill Holder (RC4EM ) 1 CAT40 3/8" Endmill Holder (RC4EM ) 1 CAT40 1/2" Endmill Holder (RC4EM ) 1 CAT40 5/8" Endmill Holder (RC4EM ) 1 CAT40 3/4" Endmill Holder (RC4EM ) Qty Description 1 CAT40 1" Endmill Holder (RC4EM ) 3 CAT40 ER20 Collet Chucks (RC4ER20255) 1 ER20 Standard 12 Piece Inch Collet Set ( ) 1 ER20 Collet Chuck Wrench (RER20W) 1 CAT40 3/4" Facemill Holder (RC4SM ) 10 Haas CAT40 Retention Knobs (RC4HRK) OR Haas CAT40 Coolant through Retention Knobs (RC4HRKC) * NOTE: If this package is purchased for a Non-Haas machine, please specify, so that the correct retention knobs can be supplied

23 CAT50 CAT50 ER16 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER16 Collets found on pages CAT50 ER16 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC5ER V ft lbs RC5ER ER16 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER16 Parts & Accessories Description Photo Dimensions Part # Item # ER16 Replacement Nosepiece RER16NPA 4 ER16 Collet Wrench RER16W 5 ER16 Stop Screw RER16SS 6 ER16 Stop Screw Coolant Thru RER16SSC 7 Required for assembly

24 CAT50 CAT50 ER20 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-to-spindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER20 Collets found on pages CAT50 ER20 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC5ER V ft lbs RC5ER V ft lbs RC5ER ER20 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER20 Parts & Accessories Description Photo Dimensions Part # Item # ER20 Replacement Nosepiece RER20NPA 5 ER20 Collet Wrench RER20W 6 ER20 Stop Screw RER20SS 7 ER20 Stop Screw Coolant Thru RER20SSC 8 Required for assembly

25 CAT50 CAT50 ER25 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER25 Collets found on pages CAT50 ER25 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC5ER V ft lbs RC5ER ER25 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER25 Parts & Accessories Description Photo Dimensions Part # Item # ER25 Replacement Nosepiece RER25NPA 4 ER25 Collet Wrench RER25W 5 ER25 Stop Screw RER25SS 6 ER25 Stop Screw Coolant Thru RER25SSC 7 Required for assembly

26 CAT50 CAT50 ER32 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER32 Collets found on pages CAT50 ER32 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC5ER V ft lbs RC5ER V ft lbs RC5ER ER32 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER32 Parts & Accessories Description Photo Dimensions Part # Item # ER32 Replacement Nosepiece RER32NPA 5 ER32 Collet Wrench RER32W 6 ER32 Stop Screw RER32SS 7 ER32 Stop Screw Coolant Thru RER32SSC 8 Required for assembly

27 CAT50 CAT50 ER40 Collet Chucks (balanced to RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming Flush precision collet nut, grips tool close to cutting edge for accuracy and rigidity Concentric to.0002" TIR puts tool precisely on spindle center line AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Wide range collets reduce collet and toolholder inventories Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Through spindle coolant standard ER40 Collets found on pages CAT50 ER40 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC5ER V ft lbs RC5ER ER40 Straight Shank Collet Extension A B D L Photo Dimensions Part # Item # RSSER ER40 Parts & Accessories Description Photo Dimensions Part # Item # ER40 Replacement Nosepiece RER40NPA 4 ER40 Collet Wrench RER40W 5 ER40 Stop Screw RER40SS 6 ER40 Stop Screw Coolant Thru RER40SSC 7 Required for assembly

28 CAT50 CAT50 TG100 Collet Chucks The key reason for the RedLine Collet Systems' accuracy and gripping power is a unique flush nut design. It incorporates a rotating ball assembly producing a radial float. This forces the collet to self-center for maximum grip, highest precision, and minimum tool wear. Flexibility to mill, drill, and ream AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance TG100 Collets found on pages CAT50 TG100 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC5TG V ft lbs RC5TG V ft lbs RC5TG V ft lbs RC5TG TG100 Series Parts & Accessories Description Photo Dimensions Part # Item # TG100 Replacement Nosepiece RTG100NPA 5 TG100 Wrench RTG100W 6 TG100 Stop Screw RTG100SS 7 TG100 Stop Screw Coolant Thru RTG100SSC 8 Required for assembly

29 CAT50 CAT50 TG150 Collet Chucks The key reason for the RedLine Collet Systems' accuracy and gripping power is a unique flush nut design. It incorporates a rotating ball assembly producing a radial float. This forces the collet to self-center for maximum grip, highest precision, and minimum tool wear. Flexibility to mill, drill, and ream AT3 or better shank taper allows for accurate, rigid toolholder-tospindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance TG150 Collets found on pages CAT50 TG150 Collet Chucks Capacity Taper A Gage Lgth (B) D L Max. Nosepiece Torque Part # Item # V ft lbs RC5TG V ft lbs RC5TG V ft lbs RC5TG TG150 Series Parts & Accessories Description Photo Dimensions Part # Item # TG150 Replacement Nosepiece RTG150NPA 4 TG150 Wrench RTG150W 5 TG150 Stop Screw RTG150SS 6 TG150 Stop Screw Coolant Thru RTG150SSC 7 Required for assembly

30 CAT50 CAT50 Endmill Holders Holders through 1.000" accept double end cutters (except as noted) therefore save on tool costs Fine thread screws match Weldon flats lock tight, stay tight AT3 or better shank taper allows for accurate, rigid toolholder-to-spindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance All tapers and lengths are ready to ship so you can get your tools fast Taper Size A CAT50 Endmill Holders - Fractional Gage Lgth (B) C D F F1 L Part # Item # V50 1/ RC5EM V50 3/ RC5EM V50 1/ RC5EM V50 5/ RC5EM V50 3/ RC5EM V50 3/ RC5EM V50 3/ RC5EM V50 3/ RC5EM V50 7/ RC5EM V50 1/ RC5EM V50 1/ RC5EM V50 1/ RC5EM V50 1/ RC5EM V50 9/ RC5EM V50 5/ RC5EM V50 5/ RC5EM V50 5/ RC5EM V50 5/ RC5EM V50 3/ RC5EM V50 3/ RC5EM V50 3/ RC5EM V50 3/ RC5EM V50 7/ RC5EM V50 7/ RC5EM V50 7/ RC5EM V50 7/ RC5EM V RC5EM V RC5EM V RC5EM V RC5EM V50 1-1/ RC5EM V50 1-1/ RC5EM V50 1-1/ RC5EM

31 CAT50 Fr o m CAT50 Endmill Holders - Fractional (see page 303 for dimensions) Taper Size A Gage Lgth (B) C D F F1 L Part # Item # V50 1-1/ RC5EM V50 1-1/ RC5EM V50 1-1/ RC5EM V50 1-1/ RC5EM V50 1-1/ RC5EM V RC5EM V RC5EM V RC5EM CAT50 Endmill Holders - Metric (see page 303 for dimensions) Taper Size A Gage Lgth (B) C D F L Part # Item# V50 6MM RC5EMM V50 8MM RC5EMM V50 10MM RC5EMM V50 12MM RC5EMM V50 14MM RC5EMM V50 16MM RC5EMM V50 18MM RC5EMM V50 20MM RC5EMM Holder Size Endmill Holder Replacement Lock Screws Screw Thread Size Max. Torque (ft lbs) Photo Part # Item # 1/ x RC4EMLS / x RC4EMLS /4 1/4-28 x RC4EMLS /16 5/16-24 x RC4EMLS /8 3/8-24 x RC4EMLS /16 3/8-24 x RC4EMLS /2 7/16-20 x RC4EMLS /16 7/16-20 x RC4EMLS /8 1/2-20 x REMLS /4 5/8-18 x REMLS /8 5/8-18 x REMLS /4-16 x REMLS /4 3/4-16 x REMLS /2 3/4-16 x REMLS /4 x REMLS MM M6-1.0 X REMLS06MM 32 8MM M X REMLS08MM 33 10MM M X REMLS10MM 34 12MM M X REMLS12MM 35 14MM M x REMLS14MM 36 16MM M x REMLS16MM 37 18MM M x REMLS18MM 38 20MM M x REMLS20MM

32 CAT50 CAT50 Facemill Holders Pilot diameter is sized for precision fit with cutter Face perpendicular to center line within.0002" Removable/replaceable drive keys are standard Fine thread locking screw is included AT3 or better shank taper allows for accurate, rigid toolholder-to-spindle mount Less tool wear and replacement means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance CAT50 Facemill Holders Taper Size A Gage Lgth (B) C L Part # Item # V50 1/ RC5SM V50 1/ RC5SM V50 1/ RC5SM V50 3/ RC5SM V50 3/ RC5SM V50 3/ RC5SM V RC5SM V RC5SM V RC5SM V50 1-1/ RC5SM V50 1-1/ RC5SM V50 1-1/ RC5SM V50 1-1/ RC5SM V50 1-1/ RC5SM V50 1-1/ RC5SM V RC5SM V RC5SM V RC5SM V RC5SM V RC5SM Facemill Holder Replacement Lock Screws Holder Size Size A B C D Photo Dimensions Part # Item # 1/ / RSMLS / / RSMLS B / Thread D A RSMLS Size 1-1/ / RSMLS / / RSMLS C RSMLS / RSMLS

33 CAT50 Fr o m Facemill Holder Replacement Drive Keys Holder Size A B Photo Dimensions Part # Item # 1/2 1/4 1/8 RSMDK /4 5/16 5/32 RSMDK /8 3/16 A B RSMDK /4 1/2 1/4 RSMDK /2 5/8 5/16 RSMDK /4 3/8 RSMDK /2 1 1/2 RSMDK Note: Drive keys are in line with drive slot

34 CAT50 CAT50 Rigid Tap Holders Rigid synchronous system for newer machine controls (machines with 32 bit microprocessors) Extended lengths available for horizontal machining centers Uses popular Bilz style quick-change collet system (see page 444) CAT50 Shank Straight Shank CAT50 Rigid Tap Holders Taper Collet Size Gage Lgth (B)* C L Part # Item # V50 # RC5THR V50 # RC5THR V50 # RC5THR V50 # RC5THR V50 # RC5THR * The B dimension is the assembled length including standard tap collet Straight Shank Rigid Tap Holders Shank Type Collet Size B* C Part # Item # SS # RSSTHR SS # RSSTHR * The B dimension is the assembled length including standard tap collet 422

35 CAT50 CAT50 Tension & Compression Tap Holders Tension & Compression style has axial float for precise thread pitch Holders travel in tension.75"/compression.37" Uses popular Bilz style quick-change collet system (see page 444) A 6.0 C B (Assembled with Standard Tap Collet) CAT50 Shank Straight Shank CAT50 Tension & Compression Tap Holders Taper Collet Size Gage Lgth (B)* C L Part # Item # V50 # RC5THT V50 # RC5THT V50 # RC5THT Straight Shank Tension & Compression Tap Holders Shank Type Collet Size A B* C Part # Item # SS # RTHSST SS # RTHSST * The B dimension is the assembled length including standard tap collet 423

36 CAT50 CAT50 Boring Head Holders AT3 or better shank taper accurate, rigid toolholder-to-spindle mount Less tool wear and replacement less scrap Fully ground flange and V-groove easy on the tool changers for less spindle and changer maintenance All tapers and lengths ready to ship get your tools fast CAT50 Boring Head Holders Taper Fits Boring Head Thread L Part # Item # V50 SPI, Kennametal, Criterion 7/ RC5BH V50 SPI, Kennametal, Criterion 1 1/ RC5BH

37 CAT50 CAT50 Stub Arbor Holders Pilot thread is ground concentric to the tapered shank Face is perpendicular to center line within.0002" Pilot diameter is sized for precision fit with cutter and is keyed for positive drive Heavy duty locking nut and three arbor spacers are included - 1/4", 3/8", 3/4" CAT50 Stub Arbor Holders Taper Saw ID Size Gage Lgth (B) C D L Part # Item # V RC5SA V RC5SA V RC5SA V RC5SA Stub Arbor Holder Replacement Parts & Accessories Description Part # Item # Nut for 1" Stub Arbor Holder R1000SAN 5 Key for 1" Stub Arbor Holder with 1/4" Square Key RSAK /4" Spacer for 1" Stub Arbor Holder RSAH100SP /8" Spacer for 1" Stub Arbor Holder RSAH100SP /4" Spacer for 1" Stub Arbor Holder RSAH100SP Nut for 1-1/4" Stub Arbor Holder R1250SAN 10 Key for 1-1/4" Stub Arbor Holder with 5/16" Square Key RSAK /4" Spacer for 1-1/4" Stub Arbor Holder RSAH125SP /8" Spacer for 1-1/4" Stub Arbor Holder RSAH125SP /4" Spacer for 1-1/4" Stub Arbor Holder RSAH125SP

38 CAT50 CAT50 Slitting Saw Holders Semi-flush nose cap gets in tight areas Change saw width without spacers Face is held perpendicular to center line within.0002" Pilot diameter is sized for precision fit with cutter and is keyed for positive drive Designed for slitting saws up to 5/16" thick wider cutters use Stub Arbor Holder CAT50 Slitting Saw Holders Taper Cutter Size ID Gage Lgth (B) C L Part # Item # V RC5SS V RC5SS V RC5SS Slitting Saw Holder Replacement Parts & Accessories Description Part # Item # Cap for 1" Pilot Holder RSSC Drive Key for 1" Pilot Holder RSSDK Cap for 1-1/4" Pilot Holder RSSC Drive Key for 1-1/4" Pilot Holder RSSDK

39 CAT50 CAT50 Jacobs Taper Holders Precision ground Jacobs pilot Jacobs taper held to better than.0002" accuracy for best mating with the drill chuck Notes: Not for high speed use. Must be cleaned before use and degreased for proper assembly. CAT50 Jacobs Taper Holders Taper Jacobs Taper Gage Lgth (B) C L Part # Item # V50 # RC5JT V50 # RC5JT V50 # RC5JT V50 # RC5JT V50 # RC5JT Jacobs High Precision Keyless Chucks Model Capacity Taper Photo Part # Item # JKP 65-J #1 J.T JKP 80-J2S #2 J.T JKP 100-J #33 J.T JKP 130-J #2 J.T Jacobs High Precision Key Type Chucks Model Capacity Taper Photo Part # Item # 11N #2 J.T N #3 J.T N #3 J.T N #4 J.T Jacobs Drill Chuck Replacement Key Chuck # Model Part # Item # 11N K N K N K N K

40 CAT50 CAT50 Morse Taper Holders Precision ground Morse taper Morse taper pocket held to.0002" accuracy for the best locking fit of the Morse shank AT3 or better shank taper results in accurate, rigid toolholder-to-spindle mount Less tool and wear replacements means less scrap Fully ground flange and V-groove is easy on tool changers for less spindle and changer maintenance Notes: Not for high speed use Must be cleaned before use and degreased for proper assembly Not to be used with coolant thru the spindle CAT50 Morse Taper Holders Taper Morse Taper Gage Lgth (B) C L Part # Item # V50 # RC5MT V50 # RC5MT V50 # RC5MT V50 # RC5MT

41 Accessories - ER11 Collet Sets Fractional 7 pc Collet Set with Wooden Tray; includes all sizes except 1/32 Description Part # Item # Photo Metric 13 pc Collet Set with Wooden Tray ER11 Fractional Collets Dia (Inch) Range (Inch) Range (mm) Part # Item # Photo 1/ / / / / / / / ER11 Metric Collets Range (mm) Range (Inch) ø (Inch) Part # Item # Photo /

42 - Accessories Fr o m ER16 Collet Sets Description Part # Item # Photo Fractional 12 pc Collet Set with Wooden Tray; includes all sizes except 1/32" Fractional Metallic Sealed 5 pc Collet Set with Wooden Tray; includes all sizes except 1/32" Metric 10 pc Collet Set with Wooden Tray *Sizes that are included in sets Metric Metallic Sealed 8 pc Collet Set with Wooden Tray *Sizes that are included in sets ER16 Fractional Collets Dia (Inch) Range (Inch) Range (mm) Part # Item # Photo 1/ / / / / / / / / / / / / ER16 Fractional Metallic Sealed Collets (Good to 2000 psi) Dia (Inch) Range (Inch) Range (mm) Part # Item # Photo 1/ / / / /

43 Accessories - Fr o m ER16 Metric Collets Range (mm) Range (Inch) ø (Inch) Part # Item # Photo * / * * * * * * * * * ER16 Metric Metallic Sealed Collets (Good to 2000 psi) Range (mm) Range (Inch) ø (Inch) Part # Item # Photo