Department of Education and Skills

Transcription

1 RES Planning and Building Unit Tullamore, Co. Offaly. Telephone: or Fax: Web: Room: Science Laboratory and Preparation Area Science Resource RES Equipment List and Specification There are six lists for science equipment, i.e. LAB, RES, DAT, CHE, PHY and BIO. The provision of science equipment for science laboratories is as follows: i) One Basic Science List LAB for each science laboratory. ii) One Science Resource List RES for each two science laboratories. iii) One Data List DAT, Part - for each two science laboratories. iv) One Biology List BIO for each Biology provision (in addition to i) and ii) above) plus Part 2 of DAT List. v) One Chemistry List CHE for each Chemistry provision (in addition to i) and ii) above) plus Part 3 of DAT List. vi) One Physics List PHY for each Physics provision (in addition to i) and ii) above) plus Part 4 of DAT List vii) Max. no. of Senior Lists: 3 for up to 4 labs; 4 for 5 labs; 5 for 6 labs. Note: Where the symbol is placed after a substance, a supplier who supplies a greater quantity than requested may be held responsible for removal and disposal of the excess. Telephone: Fax: November 20 Page of 8

2 RES Standards, Specifications and Conditions All equipment shall be durable and safe for school use. Equipment wholly or partly funded from public funds is subject to inspection by officers from the Department of Education and Skills. It is essential that tenders and tenderers for equipment for school use shall: Comply fully with the specifications and be durable and safe for school use. Comply fully with the standards as detailed and shall comply fully with European Standards (EN), both established and developing. Comply with European electrical standards and CE marking as appropriate. Fully comply with requirements in the Request for Tenders (RFT) document. Be accompanied by documentation of sufficient detail for full evaluation. Include the completed and signed certificate of compliance. Award of a contract is conditional on the production of a current tax clearance certificate. Failure to comply with the above may result in the tender being deemed null and void. Telephone: Fax: November 20 Page 2 of 8

3 RES 00-6 Code Quantity Section : Basic Science Equipment Descriptions and Specifications RES/00 Adhesive Tape Dispenser Cost : RES/0 Adhesive Tape, transparent, width 9 mm, in roll length 66 m. 2 RES/02 2 Blank labels, self adhesive, white, circles 2 mm diameter, supplied in dispenser pack of 900 labels approx. RES/03 Benchkote, roll, 46 cm 50 m, or equal. 2 RES/04 RES/05 RES/06 RES/07 RES/08 Bags, disposal, Polyethylene, non-sterile, can be autoclaved at 2 C, printed with biohazard symbol, size c. 60 x 760 mm, pack 00 Hazard warning label, self-adhesive vinyl roll, comprising 330 labels, 50 x 50 mm, on backing paper, text and symbols in black, CORROSIVE. Hazard warning label, self-adhesive vinyl roll, comprising 330 labels, 50 x 50 mm, on backing paper, text and symbols in black, HIGHLY FLAMMABLE. Hazard warning label, self-adhesive vinyl roll, comprising 330 labels, 50 x 50 mm, on backing paper, text and symbols in black, OXIDISING AGENT. Hazard warning label, self-adhesive vinyl roll, comprising 330 labels, 50 x 50 mm, on backing paper, text and symbols in black, IRRITANT. RES/09 Paper roll, Milaroll or equivalent, green, 300 mm wide RES/0 Galvanised reel dispenser, Milaroll or equivalent, to suit above RES/ Universal indicator charts, laminated, pack 0 2 RES/2 Hazard warning label, self-adhesive vinyl roll, comprising 330 labels, 50 x 50 mm, on backing paper, text and symbols in black, TOXIC. RES/3 Test paper books, cobalt chloride, pack 0 books 5 RES/4 Parafilm, two-way stretch, 00 mm wide, roll length 38 m long RES/5 4 Lens tissue, soft, lint-free, non-scratching, sheets 300 x 200 mm, boxes of 00 sheets. RES/6 Rubber bands, packet 00, various sizes 2 Telephone: Fax: November 20 Page 3 of 8

4 RES 7-36 RES/7 Rubber tubing, red. B.S. 2775, size N6.5 normal wall, 0 m length 2 RES/8 Rubber tubing, red. B.S. 2775, size N8 normal wall 0 m length 2 RES/9 Rubber tubing, red. B.S. 2775, size N5 normal wall, 0 m length 2 RES/20 Rubber tubing, red. B.S. 2775, size H5 heavy wall, 0 m length 2 RES/2 Silicone tubing, bore 6 mm x 0 mm o.d., coil 5 m RES/22 Silicone tubing, bore 8 mm x 2 mm o.d., coil 5 m RES/23 Tool kit: Comprising brush, forceps (fine point), assorted screw drivers, mains tester, 2 pliers, wire stripper, assorted Allen keys, spanner set, file, mirror, soldering iron and solder. RES/24 Triangular file, 50 mm RES/25 Cork borer set, nickel-plated brass, tube sizes 5-9 RES/26 Cork, assorted, pack 50 approx 2 RES/27 Craft knife with two packets of blades RES/28 Glass cutting knife, with replaceable blades RES/29 6 Absorption tubes, U form with side arms. Overall length x diameter 50 x 20 mm. RES/30 Jug, polypropylene, graduated, capacity litre 2 RES/3 6 RES/32 RES/33 Basin, polypropylene, rectangular, flat bottom, 35 mm x 30 mm x 25 mm deep (approximate dimensions). Draining rack, fitted with wall protecting back panel and fixing lugs to take 30 test-tubes and 2 flasks or beakers DELETED RES/34 Weighing boats, polystyrene, disposable, 30 cm 3, pack of RES/35 Weighing boats, polystyrene, disposable, 00 cm 3, pack of RES/36 Taper, wax, box 60 2 Telephone: Fax: November 20 Page 4 of 8

5 RES RES/37 Wood splints, bundles of 000 approx. RES/38 2 Bell jar, borosilicate glass, graduated with stopper on top. Height x diameter 300 x 200 mm. RES/39 6 Thermos vacuum flask or equivalent, 500 cm 3 capacity, silvered glass inner vessel, plastic outer container, screw stopper and cap RES/40 Refill flasks, silvered glass inner vessel, 500 cm 3 capacity, for above 2 RES/4 Ball and ring apparatus, to show expansion of metal when heated 2 RES/42 3 Bar breaking apparatus, on expansion (heating) or contraction (cooling) of metal RES/43 Breaking bars for above, pack 0 6 RES/44 Domestic heating system model with thermochromic liquid RES/45 Thermochromic liquid, L, for above 2 RES/46 3 RES/47 RES/48 6 RES/49 2 Expansion of liquid apparatus, 5 bulb tubes, 40 mm diameter with stems 300 mm long in frame, with scales, housed in metal trough Leslie s cube, tin plate, black white, amber and polished bright tin surfaces, sides 30 mm, top opening 75 mm Electricity kit, components mounted on plastic base, with 4 mm sockets, to enable introductory circuit investigations (bulbs, cells, switches, electromagnets, motors, buzzers), with test leads, cell holders (D type), bulbs (MES) in holders, switches (press and two-way), variable resistors, motors, buzzers, electrode holders, diodes crocodile clips iron rods, carbon rods, insulated wire (reel) Electroscope, metal aluminium vane, 50 mm diameter charging disc mounted on metal casing with removable glass side panels RES/50 Energy conversion kit, consisting of filament lamps, motors with mounted pulleys + drive belts, flywheel, capacitor, friction calorimeter, drop weight, batteries (.5 V), electrical lead set for all interconnections RES/5 Crookes' radiometer RES/52 Solar Cell energy kit for schools to provide an introduction to solar energy. Comprising eight 500 mv 00 ma solar cells, miniature dc motor, small fan and other accessories to construct a working model Telephone: Fax: November 20 Page 5 of 8

6 RES RES/53 RES/54 Hoffmann voltameter, graduated, complete with stand, carbon and platinum electrodes. Stranded wire, 7/0.2 mm copper conductor, overall diameter.4 mm, supplied in packs of 20 m (2 m each of 0 different colours),.4 A RES/55 Motor 6 V, d.c. with 4 mm sockets (demonstration purposes) 6 RES/56 Masses set, 0 N (9 x N weights on N hanger) 6 RES/57 Copper wire, uncovered, SWG 22 (c.0.64 mm), 250 g reel RES/58 Copper wire, polyurethane covered, SWG 22 (c.0.64 mm), 25 g reel RES/59 Masses set, 00 g (9 x 0 g slotted weights on 0 g hanger) 6 RES/60 Masses set, 000 g (9 x 00 g slotted weights on 00 g hanger) 6 RES/6 Masses, general purpose set, 0 mg to kg boxed. 2 RES/62 Slotted weights, each of g, 2 g, 5 g. 2 RES/63 Pendulum bob, brass approx. 40 g with pointed index tip and hook. 2 RES/64 RES/65 RES/66 RES/67 RES/68 6 Aneroid barometer combined weather station (thermometer and hygrometer), range mb, temperature range 0 0 C 40 0 C, humidity 20-00% RH. Strong cover glass, clear display with index pointer and setting knob. Wormery, size 400 x 250 mm approx., complete with removable glass plates. Thermometer, soil, spirit in glass, range 0 to 0 0 C, mounted in an aluminium tube 225 mm long with probe end for inserting into soil and a cut out front for reading the temperature. Top marked with large red sphere. Thermometer, general purpose Max. and Min., scale 30 to C, with two resetable cursors, in wall mounting white plastic case with sloping weather shield, (Six s Pattern) Compass, map, oil filled rotating dial, luminous N needle and points, 60 x 25 mm approx. RES/69 Quadrat, steel frame, plastic coated protective covering, 0.5 x 0.5 m 2 Telephone: Fax: November 20 Page 6 of 8

7 RES RES/70 2 Tape measure, PVC coated fibre glass, width 3 mm, graduated one side every 0mm and figured every tenth of metre with metre figures in red, in an ABS plastic case with rewind handle, 50 m length. RES/7 Rope, for line transect, coloured nylon, lightweight, roll 50 m long 2 RES/72 4 Trundle wheel, ABS plastic moulded trundle wheel, non-slip type, detachable handle for easy storage, m circumference and marked every 5 cm with larger markings every 25 cm, adjustable clicker, complete with trundle wheel counter. RES/73 Surveying (Tent) pegs, plastic, pack 0 2 RES/74 Insect net, 375 mm frame, 600 mm deep, with handle 2 RES/75 Pooter, plastic, complete with mouth piece and collecting tubes 2 RES/76 6 RES/77 6 Funnel, Tullgren, supplied with coarse and fine meshes, glass collection dish, lamp and.5 m 3-core cable, for use on AC mains, 230 V. Counter, tally, figures 4 mm high, white on black background, in chromeplated case. RES/78 Dissecting magnifier, tripod type, lens 00 mm diameter, swivel type, telescopic legs RES/79 Razor Blade, safety backed, pack 0 4 RES/80 2 Syringes, polypropylene, disposal, with Luer nozzle, pack of 20, capacity 0 cm 3 RES/8 RES/82 Syringe needles, stainless steel, disposal, with Luer push fitting, 20G x in, (0.9 x 25 mm, diameter x length), pack of 00, for use with RES/80 Dissecting needle, straight, stainless steel in plain wooden handle 2 RES/83 Sharps container, leak proof, puncture resistant, fully labelled, complete with remover, handle and locking closure, c. 6.5 L RES/84 Petri dishes, sterile, polystyrene disposable, 90 mm x 2 mm, pack of Telephone: Fax: November 20 Page 7 of 8

8 RES RES/85 6 RES/86 RES/87 2 Microscope, monocular, 0x eyepiece, low voltage illumination, 2 V/20 W built-in, 40 x 40 mm mechanical stage, 3 objectives 4x/0., 0x/0.25, 40x/0.65, triple nosepiece, lenses coated, separate coarse and fine focusing, built-in safety lock to protect slides. The 40x objective spring-loaded, condenser with iris diaphragm and centring ring, rack and pinion focusing, a.c., 230 V, 50 Hz supply. Supplied with spare bulbs, fuses, plan/concave orientable mirror, dust cover. Inclines, rotatable viewing tube or conventional inclinable body, stage with side clips. Microscope, stereoscopic, binocular head inclined at 50º 55º, Interpupillary distance adjustment; rack and pinion focusing. Eyepieces x0 with x2 and x4 turret objectives. Fitted with top/bottom fluorescent illuminator, for use with 230 V 50 Hz supply. Supplied with dust cover. Glass block, optically worked surfaces, for refractive experiments, 70 x 50 x 8 mm approx. RES/88 Prism, crown glass, 90º x 45º x 45º, 50 mm face size 2 RES/89 Hot plate with magnetic stirrer. Thermostatically controlled up to 400 ºC, electronic speed control up to 300 rpm, a.c., 230 V power supply RES/90 Magnetic follower bar, PTFE coated, centre rim, length 25 mm, for above RES/9 2 RES/92 2 RES/93 RES/94 Multi-mantle, electrothermal, integral energy regulator for heating liquids in flasks, spill proof, capacity cm 3, 230 V, 50 Hz Electric hot plate, halogen, maximum temperature 450 C, precise variable electronic heat control, glass-ceramic top plate, 290 x 290 with central heated area 40 mm diameter, safety Hot light feature. Single phase supply, 200 W, 230 V, Hz Oven / Incubator, range 20 C 200 C or nearest, capacity 50 L, number of movable shelves 2 (3 positions), wattage 000, dimensions H x W x D 33 x 49 x 33 cm or nearest equivalent, 230 V a.c., complete with 2 m three-core cable (note: thermostat and heating elements must be easily replaceable) Water bath, 22 litres capacity, stainless steel interior with removable false base, digital temperature controller and display, stove enamel or plastic finished exterior, temperature range from ambient to 00 C, stirrer/control unit mounted on end of bath, user resettable safety cut-out device, 250 W, single phase, 230 V, 50 Hz. Telephone: Fax: November 20 Page 8 of 8

9 RES RES/96 RES/97 RES/98 RES/99 Deioniser, on wall mounting bracket, with inlet valve and minimum of m outlet tube, battery operated colour coded conductivity meter allowing instant monitoring of the treated water quality, cartridge output min. 200 litres with min. flow rate of 25 L/hour within range.0 to 0. µs/cm for moderately hard water. Complete with 2 no. spare cartridges. Refrigerator, min. 3-star, 600 mm x 600 mm x 500 mm high, 50/50 fridge/freezer (50:50), c.80 litre capacity, with rust proof inner liner, auto defrost, 230 V, 50 Hz. (Not for chemical storage). Energy efficiency Class A. Microwave oven, 000 W, electronic controls and digital displays, glass turntable, 20 L capacity approx. Energy efficiency Class A. Dishwasher, settings to 65 C, stainless steel interior, 230 V 50 Hz, hot and cold water supplies. Size c.600x600x850 high mm. Energy efficiency Class A Telephone: Fax: November 20 Page 9 of 8

10 RES Section 2: Glass and Polythene ware RES/200 Flask, volumetric, glass with polypropylene stopper, 250 cm 3 0 RES/20 Flask, volumetric, glass with polypropylene stopper, 500 cm 3 5 RES/202 Flasks, volumetric, glass, with polypropylene stopper, 000 cm 3 2 RES/203 3 RES/204 3 Measuring cylinders with spout, borosilicate glass, nominal capacity 500 cm 3 Measuring cylinders with spout, borosilicate glass, nominal capacity 000 cm 3 RES/205 Tubing, soda lime glass, external diameter 8mm, pack 0 x.5 m lengths RES/206 RES/207 2 RES/208 2 Capillary tubing, soda lime glass, length.5 m, external diameter 8 mm, pack 278 Tube, combustion, borosilicate glass, open at both ends, inner diameter 22 mm 300 mm length Jointed glass set, one joint size 4/23 only comprising the following items: Liebig condenser, pear shaped flask (50 cm 3 capacity), stillhead (plain with thermometer socket), cone/screw-thread adapter, receiver adapter (plain bend, long), air/steam inlet tube (straight with cone), dropping tap funnel, stopper, thermometer ( 0 to 250 C) or equivalent set 4J4 or 7BU RES/209 Pipette, graduated (0.2 cm 3 ), 25 cm 3 capacity, pack 5 RES/20 RES/2 5 RES/22 Distillation apparatus (demonstration), jointed glass, comprising: flask, 00 cm 3, pear shaped, socket/cone size 4/23; Liebig condenser, socket 4/23, cone 0/3; stopper, hollow glass, closed ends, size 4/23; receiver, socket size 0/3, plain bend, short Reagent bottles, amber glass, narrow mouth with interchangeable dustproof polythene stoppers with hexagonal heads, capacity 250 cm 3 Bottles, sample, clear polypropylene, polyethylene screw cap, 60 cm 3 capacity, case 300 Telephone: Fax: November 20 Page 0 of 8

11 RES RES/300 Section 3: Anatomical Models Model of the heart, two parts, front heart wall removed to reveal the chambers and valves inside, removable base and English key card RES/30 Model of elbow joint, life size, on stand RES/302 Human circulatory system model, heart, blood vessels, lungs, complete with red dye and pumping system, on a stand RES/303 Human eye model, enlarged 5 times, 8 parts, on a base RES/304 RES/305 Replica human skeleton, plastic, full size, fully articulated. Skull divisible into three, arms and legs detachable, complete with roller stand and dust cover, height.75 m approx. Human torso, bisexual, interchangeable male and female genital organs, dissectible into parts, mounted on base, life size. Telephone: Fax: November 20 Page of 8

12 RES Section 4: Chemicals and Reagents RES/400 Agar, nutrient, all purpose, 500 g RES/40 Aluminium foil, 500 mm wide roll, 75 m long RES/402 Aluminium sulfate, 00 g RES/403 Ammonia solution, 0.88%, 2.5 L RES/404 Amylase, enzyme, 25 g RES/405 Anti-bumping granules, 250 g RES/406 Biuret reagent, 500 cm 3 RES/407 Benedict s reagent, qualitative, 500 cm 3 RES/508 Candles, medium size, pack 2 2 RES/409 Chinagraph pencils, blue 2 RES/40 Copper(ll) sulfate, 500 g RES/4 Copper(ll) sulfate, anhydrous, 250 g RES/42 Calcium carbonate, kg RES/43 Calcium chloride, 500 g RES/44 Calcium granules, 50 g RES/45 Calcium hydroxide, 500 g RES/46 Calcium sulfate, 500g RES/47 Charcoal, granular, activated, 500 g RES/48 RES/49 DELETED DELETED RES/420 Copper powder, 00 g Telephone: Fax: November 20 Page 2 of 8

13 RES RES/42 Copper turnings, 500 g RES/422 Cotton wool, non absorbent, rolls 500 g RES/423 Disclosing tablets, pack 30 tablets RES/424 Ethanoic (acetic) acid, L RES/425 Ethanol, 95% (industrial methylated spirits), 2.5 L RES/426 Fehlings solution No., 500 cm 3 RES/427 Fehlings solution No. 2, 500 cm 3 RES/428 Food dye, water soluble, blue, 00 cm 3 RES/429 Food dye, water soluble, green, 00 cm 3 RES/430 Food dye, water soluble, red, 00 cm 3 RES/43 Glass wool, 500 g RES/432 Glucose, anhydrous, 500 g RES/433 Hydrochloric acid, conc. 2.5 L RES/434 Hydrogen peroxide, 500 cm 3, c.6% w/v. RES/435 Indicator ph Paper, 6 Reel Set, including two dispensers of full-range Indicator paper (ph -4) + one dispenser of each of the narrow range paper, ph -4, 4-6, 6-8, 8-0. Each paper reel 5 m long x 6mm wide. RES/436 Iodine, 0 g RES/437 Iodine solution, 500 cm 3 RES/438 Iron filings, fine, 250 g RES/439 Iron filings, coarse, 250 g RES/440 Iron sulfate, 500 g RES/44 Lithium (metal rods), 0 g Telephone: Fax: November 20 Page 3 of 8

14 RES RES/442 Litmus paper, red, reel, 5 m long x 6 mm wide 5 reels RES/443 Litmus paper, blue, reel, 5 m long x 6 mm wide 5 reels RES/444 Litmus powder, 0 g RES/445 Lime water, 500 cm 3 RES/446 Magnesium oxide, 500 g RES/447 Magnesium powder, coarse, 00 g RES/448 Magnesium ribbon, 25 g RES/449 Magnesium turnings, 500 g RES/450 Manganese(IV) oxide, precipitated, 500 g RES/45 Marble chips, 500 g RES/452 Methylene blue for microscopical staining, 25 g RES/453 Oxalic acid (ethanedioic), 500 g RES/454 Phenolphthalein (ph indicator) % indicator solution in 50% ethanol, 250 cm 3 RES/455 Potassium, 0 g RES/456 Potassium iodide, 00 g RES/457 Potassium manganate(vii), 250 g RES/458 Sach s water culture set to demonstrate mineral deficiency in plants RES/459 Silica gel (self-indicating), 250 g RES/460 Soda lime, 500 g RES/46 Sodium carbonate, 500 g RES/462 Sodium chloride, 500 g Telephone: Fax: November 20 Page 4 of 8

15 RES RES/463 Sodium hydrogen carbonate, 500 g RES/464 Sodium hydrogen sulfite (metabisulfite), 00 g RES/465 Sodium hydroxide pellets, 500 g RES/466 Sodium metal pellets, in paraffin, 0 g RES/467 Starch, soluble, 200 g RES/468 Sucrose, 500 g RES/469 Sulfur, fine powder, 250 g RES/470 Sulfuric acid, sp.gr..84, 2.5 L RES47 Steel wool, 500 g RES/472 Universal indicator solution, full range ph -4, 500 cm 3 RES/473 Universal indicator paper, full range (ph -4), 4 reel pack 2 RES/474 Visking tubing, 4 mm x 25 mm (inflated diameter x flat width), roll 5 m RES/475 6 Clips ( for Visking tubing), to close end of tubing up to 29 mm inflated diameter, pack of 0. RES/476 Wax, paraffin, kg RES/477 Zinc, granulated, 500 g Telephone: Fax: November 20 Page 5 of 8

16 RES Section 5: Safety Equipment RES/500 Fire blanket, glass fibre, c. 80 cm 92 cm RES/50 RES/502 Face shield, lightweight with polycarbonate visor, adjustable head harness and brow guard First aid cabinet, c. 450 x 330 x 200 mm, metal, lockable, for wall mounting, complete with shelving, including shelving on inside of doors, to include plaster strip, rowa rolan, burn shield, burn gauze, cotton bandages, triangular bandages, zinc oxide tape, cotton wool, cotton buds, tube gauze, CPR mouth piece, gauze swabs, antihistamine cream, savlon cream, burn cream, eye pads, optrex, dettol, scissors, forceps, safety pins, gloves, wound wipes, one shot eye wash, absorbent lint, ice pack, wound dressings, burn dressings, crepe bandage, ambulance pads, plasters. RES/503 Safety screen, polycarbonate panels (3) hinged, aprrox. Dimensions: 60mm high, outer panels, 230 mm wide, centre panel 300 mm wide, polypropylene bases for clamping/screwing to bench RES/504 Clamp, metal, 50 mm opening for use with safety screen above 3 RES/505 2 RES/506 2 RES/507 2 Winchester carrier, polythene coated steel wire frame, with handles and feet, for two Winchester bottles. Pipette filler, acid resistant plastic, for precision filling and dispensing from all standard pipettes, from micro size to 25 cm 3, complete with release valve for rapid pipetting, for 25 cm 3 pipette Storage Cabinets c.450x600x750 mm high one for flammable and one for corrosive liquids (items SCF on Room Layouts). Telephone: Fax: November 20 Page 6 of 8

17 RES Equipment for Science (Resource) Five Sections Section Code Quantity Descriptions & Specifications Total Cost : Section RES/00 - RES/97 Basic Science Equipment. Section 2 RES/200 - RES/22 Glass and Polythene Ware Section 3 RES/300 - RES/305 Anatomical Models Section 4 RES/400 - RES/477 Chemicals and Reagents Section 5 RES/500 - RES/507 Safety Equipment Sub-total : Add for VAT: Total Amount for RES List: Standards, Specifications and Conditions All equipment shall be durable and safe for school use. Equipment wholly or partly funded from public funds is subject to inspection by officers from the Department of Education & Skills. It is essential that tenders and tenderers for equipment for school use shall: Comply fully with the specifications and be durable and safe for school use. Comply fully with the standards as detailed and shall comply fully with European Standards (EN), both established and developing. Comply with European electrical standards and CE marking as appropriate. Fully comply with requirements in the Request for Tenders (RFT) document. Be accompanied by documentation of sufficient detail for full evaluation. Include the completed and signed certificate of compliance. Award of a contract is conditional on the production of a current tax clearance certificate. Failure to comply with the above may result in the tender being deemed null and void. Certificate of Compliance with Standards, Specifications and Conditions Telephone: Fax: November 20 Page 7 of 8

18 RES I/We certify that the equipment tendered complies in all respects with the Standards, Specifications and other requirements/conditions specified in this tender document and in the Request for Tenders (RFT). I/We hold a current tax clearance certificate. Company: Signed: Position: Date: Telephone: Fax: November 20 Page 8 of 8