Promo PRECISION HAND TOOL PROMOTION

Transcription

1 Promo PRECISION HAND TOOL PROMOTION

2 Micrometers 124 INSIDE MICROMETER Insulated rods marked with length Adjustable for length 6-1/2" (165mm) long handle is available Measuring rods are solid Graduations:.001" Cat. No. EDP Range Screw Movement Spacing Collars Rods Sale Price 124AZ " 1/2" One 1/2" DZ " 1/2" and 1" (2 heads) Set 124A and 124C MAZ mm 13mm One 12mm MDZ mm 13mm and 25mm (2 heads) Comprised of set 124MA and 124MC AZ 210 SCREW THREAD COMPARATOR MICROMETER 60 conical anvil, spindle faces with 1/64" (0.4mm) flats on the ends of the points Extremely hard and stable one-piece spindle Advanced sleeve design with staggered lines and distinct figures for precise, easy readability Balanced frame design for comfortable, accurate measuring 220 MUL-T-ANVIL MICROMETERS Handles a wide variety of measurements impossible to obtain with regular micrometers Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle Micro-lapped measuring faces 210AP 220XFL-1 Cat. No. EDP Range Grad. Accuracy Sale Price 210AP / ±.002" Cat. No. EDP Range Grad. Accuracy Sale Price 220XFL ".001" ±.0002" INTERCHANGEABLE ANVIL MICROMETERS Suitable wrenches are furnished to make necessary adjustments Combination ratchet and speeder for uniform pressure and quicker adjustment Advanced sleeve design with staggered lines and distinct figures for precise and easy readability 224AARLZ Cat. No. EDP Range Grads. Standards* Sale Price 224AARLZ ".001" 1", 2", 3" ARLZ ".001" 2", 3", 4", 5" BRLZ ".001" 6", 7", 8" GRLZ ".001" 6", 7", 8", 9", 10", 11" CRLZ ".001" 9", 10", 11" DRLZ ".001" 12", 13", 14", 15" ERLZ ".001" 16", 17", 18", 19" 1, JRLZ ".001" 20", 21", 22", 23" 1, MAARLZ mm 0.01mm 25, 50, 75mm MARLZ mm 0.01mm 50, 75, 100, 125mm MGRLZ mm 0.01mm 150, 175, 200, 225, 250, 275mm MDRLZ mm 0.01mm 300, 325, 350, 375mm *Standards included 2 Prices effective June 1 - August 31, 2016 Specifications subject to change.

3 430 INDICATING MICROMETER Retractable, quick release anvil for uniform, consistent, and fast measurement Insulated frame to prevent thermal expansion/contraction Balanced frame and thimble design for ease of use Carbide measuring finish on anvils Friction thimble Satin chrome finish for rust and glare resistance Spindle lock Supplied with custom wooden case 430XLZ-1 Range Resolution Cat. No. EDP Mic. Indic. Mic. Indic. Sale Price 430XLZ " ±.0020".0001".00005" Micrometers T444 OUTSIDE MICROMETERS No-glare satin chrome finish, which resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Balanced frame and thimble design to ensure easy handling and better readability Insulated frame for prevention of temperature related expansion and contraction Provides quick and easy adjustment Reading in ten-thousandths of an inch (.0001") with vernier scale on the sleeve 445 DEPTH MICROMETERS Depths of holes, slots, shoulders and projections can be measured to.001" (0.01mm) Furnished with choices of 3" (75mm), 4" (100mm), and 6" bases and have 5/32" (4mm) diameter measuring rods Combination ratchet and speeder for uniform pressure and quicker adjustment Ring-type lock nut for quick and sure locking T444.1XRL-1 445AZ-6RL Cat. No. EDP Range Grads. Sale Price T444.1XRL ".0001" T444.1XRL ".0001" T444.1XRL ".0001" T444.1XRL ".0001" T444.1XRL ".0001" T444.1XRL ".0001" Cat. No. EDP Range Sale Price 445AZ-3RL " AZ-6RL " AZ-9RL " AZ-12RL " BZ-3RL " BZ-6RL " BZ-9RL " BZ-12RL " BLADE TYPE MICROMETERS The blades are.030" (0.8mm) thick Blades will measure to 5/16" (8mm) depths Balanced frame and thimble design ensure easy handling and better readability Speeder for quicker adjustment on all sizes 486P-1 Cat. No. EDP Range Sale Price 486P " P " P " P " starrett.com 3

4 Micrometers 762 ELECTRONIC MICROMETER HEADS Starrett satin chrome finish - no glare - resists rust on all reading surfaces Extremely hard and stable one-piece spindle (the heart of our accuracy and long life) Micro-lapped measuring face for flatness and squareness Inch/millimeter conversion PRESET button to install any reading at any position Measurement HOLD button RS232 data output port 762XFL-2 Range Cat. No. EDP in mm Sale Price 762XFL XFL MEXFL MEXFL ELECTRONIC MICROMETERS Without Output Balanced frame design for comfortable and accurate measuring Large, easy-to-read, high-contrast LCD digital readout No-glare black wrinkle finish on frame Hard and stable one-piece friction thimble permits one-hand operation of micrometer and uniform contact pressure 3732XFL-1 Cat. No. EDP Range Resolution Accuracy Sale Price 3732XFL " " ± " XFL " " ± " XFL " " ± " XFL " " ± " OUTSIDE MICROMETER STAND Converts outside micrometers to a sturdy bench gage for batch inspection of small parts Useful as a handy bench vise or assembly fixture Secure gripping surfaces Ball joint construction allows head to be positioned as much as 30 off perpendicular in any direction Positive lock on the base Base Dimensions: 6-3/8" long x 3-1/2" wide x 3/4" thick (162mm long x 89mm wide x 19mm thick) Tilting head clamping: 3/4" thick x 1" throat depth (19mm thick x 25mm throat depth) Accommodates all Starrett 1/2" (13mm) and 1" (25mm) outside micrometers, 2 and 2A 2" Outside Micrometers and 210, 220, 483, 485, 569 Special Purpose Outside Micrometers Outside micrometer stand Prices effective June 1 - August 31, 2016 Specifications subject to change.

5 798 ELECTRONIC CALIPERS IP67 level of protection against, coolant, dirt and dust With and without output Fine adjustment Hardened stainless steel measuring surfaces Large, easy-to-read, high contrast LCD digital readout 798A-6/150 Cat. No. EDP Range Resolution Output Sale Price 798A-6/ ".0005" A-8/ ".0005" A-12/ ".0005" B-6/ ".0005" x B-8/ ".0005" x B-12/ ".0005" x BX-6/ ".0005" x Slide Calipers EC799 ELECTRONIC CALIPERS Lightweight, ergonomic design Inch/millimeter conversion reads.0005" or 0.01mm Easy access to the single, long-life battery Last measuring position retained when shut off Hardened stainless steel body for long life Find adjustment thumb wheel Lock screw to hold the slide in position Resolution:.0005" (0.01mm) Zero at any position EC799A-6/150 Cat. No. EDP Range Output Sale Price EC799A-6/ " EC799A-8/ " EC799A-12/ " EC799B-6/ " x EC799B-8/ " x EC799B-12/ " x SLIDE CALIPERS Provide quick accurate measurement of O.D. and depth Sharp, clear dial graduations Sharp, black graduations on satin finished bar Hardened stainless steel Lock screws for sliding jaw and dial bezel Cat. No. EDP Range Grads. Sale Price ".001" ".001" ".001" starrett.com 5

6 Depth and Height Gages 3752 ELECTRONIC HEIGHT GAGE Clear bar graduations in.100" and 5mm increments Large.380" (9.65mm) easy-to-read LCD display - reads to.0005" or 0.01mm Instant inch/millimeter conversion Carrier and scriber designed to read from zero Cat. No. EDP Range Resolution Sale Price / ".0005" / ".0005" 1, A ELECTRONIC DEPTH GAGES Without Output Clear, easily-read number, properly sized for the tool Hardened stainless steel body and slide for long life Fine adjustment thumb roll for precision measurements Lock to hold slide in position / A-6/150 Cat. No. EDP Range Resolution Accuracy Sale Price 3753A-6/ ".0005" ±.001" A-8/ ".0005" ±.001" A-12/ ".0005" ±.001" B ELECTRONIC DEPTH GAGE With Output Hardened stainless steel bar for long life Removable hook attachment for measurements from the edge of the slots, grooves, etc. Lock to hold the slide in position Fine adjustment thumb roll for precision measurements Large, easy-to-read LCD,.310" character height Induction type linear encoder system Patented non-contact RS-232 data output CR volt battery (>year battery life under normal use) In/mm conversion 3753B-6/150 Zero at any position Cat. No. EDP Range Description Sale Price 3753B-6/ " Depth gage in case Prices effective June 1 - August 31, 2016 Specifications subject to change.

7 81 DIAL INDICATORS Shockless, hardened steel gear train and jewel bearings Furnished with a lug-on-center back Anti-magnetic and special non-shock mechanisms are options available for all models Double row figure dials Graduations:.001" 196 UNIVERSAL BACK PLUNGER DIAL INDICATORS One of the most versatile indicators available Accurate and reliable Simple to operate Range:.200" (5mm) Graduations:.001" (0.02mm) 196A1Z Indicators J Cat. No. EDP Dial Reading Range Sale Price J " J " J " J " J " J " J " J " Cat. No. EDP Reading Sale Price 196A1Z B A6Z B A5Z B MA1Z Yellow dial face MB Yellow dial face ELECTRONIC INDICATORS True Absolute Sensor Techology - remembers position and zero set point even during battery replacement. Cannot be "over-sped" into failure. Intuitive design and layout - easy to learn and use Positive, tactile-feel button activiation IP67 protection against dirt, dust, water and coolant to withstand hostile shop environments Cat. No. EDP Range Range Resolution Sale Price ".00005" ±.00012" ".0005"/.0001"/.00005" ±.001" ".0005" ±.001" ".0005" ±.001" ".0005"/.0001"/.00005" ±.00012" DIAL INDICATOR STANDS Designed for comparison measurements using a dial indicator or digital indicator Vertical fine adjustment is standard on all models 8mm stem bushing included Can be used with any AGD dial or digital indicator Furnished with a serrated or flat anvil which is ground and lapped and removable Stand with round, flat anvil Stand with round, serrated anvil Stand with square, serrated anvil * Indicator not included. starrett.com 7

8 L3 SYSTEMS Starrett L3 systems represent a new and easier solution for creating a test; performing a test; analyzing your test results; and managing test data. L3 Systems meet the requirements of today's research scientist, design engineer, quality manager or technician responsible for material characterization, verification and validation. L2 PLUS SYSTEMS Designed for advanced force measurement and analysis, L2 Plus systems are optimized for quality and engineering personnel. Test setup is intuitive, efficient and non-compromising. Like our L3 systems, L2 Plus measurements and analysis are performed graphically. Create high resolution graphs based on load, distance, height and time. Then measure any point or segment on your graph using a set of analysis tools. Force Measurement + Material Testing

9 L2 SYSTEMS S2 SYSTEMS L2 systems operate using a Windows -based table PC, load, distance and time-based results are displayed in a large format for easy interpretation. Graphical representation of each test can be displayed. Data tables display results with tolerance and statistical calculations. Standard reports are included, or export data for use with other applications. S2 systems are ideal for high-volume production testing, quality control including incoming inspection verification and validation, and research and design engineering. Our simple, fill-in-theblank test setups let you test and validate your springs in as few as three steps allowing your testing to be performed in seconds. WATCH OUR INFORMATIONAL VIDEOS TO LEARN MORE ABOUT OUR FORCE AND MATERIAL TESTING SOFTWARE! Turnkey system solutions for material testing, force analysis and force measurement. Our systems distinguish themselves from the competition by making it easy to create and perform a test, and manage test results. We offer a full range of test frames, software, load cell sensors, test fixtures and more.

10 Bore Gages 78XT BORE GAGES Wide measurement range without changing anvils Tungsten carbide measuring faces Ratchet stop Self-centering contacts Blide bore measuring capability Extensions available up to 6" (150mm) Setting rings included Furnished in a case, complete with setting ring, contacts, wrenches, and instructions 78XTZ-100 Cat. No. EDP Range Accuracy Sale Price 78XTZ "-.100".00010" 1, XTZ /4"-5/16".00015" XTZ /16"-3/8".00015" XTZ /8"-1/2".00015" XTZ /2"-5/8".00015" XTZ /8"-3/4".00015" XTZ /4"-1".00015" XTZ "-1-3/8".00015" XTZ /8"-2".00020" 1, XTZ "-2-5/8".00020" 1, XTZ "-5".00025" 1, XTZ "-8".00030" 3, XTZ "-9".00030" 3, A DIAL BORE GAGES Can be easily held to inspect bores and hole sizes without removing the workpiece Adjustable range screw and two centralizing plungers are of hardened tool steel for wear and spring-loaded for sensitivity The housing and knurled handle are aluminum for light weight and good balance Furnished in finished wood case Cat. No. EDP Range Bore Depth Sale Price 84AZ-111-4J /2"-3" 3" 1, AZ-111-5J "-5-1/16" 6" 1, AZ-134-5J "-5-1/16" 6" AZ-111-6J "-8" 6" 1, AZ-134-6J "-8" 6" 1, AZ-111-7J "-12-1/2" 7" 1, MAZ-161-4J mm 75mm 1, MAZ-181-4J mm 75mm 1, MAZ-161-5J mm 150mm 1, AZ-111-5J 770 ELECTRONIC BORE GAGES Larger and clearer LCD display Updated electronics Standard proximity output Simple two button operation 4 preset memories 3089 DIAL BORE GAGES All anvils laser marked for easy selection Gage chart for quick and easy anvil selection Includes sturdy aluminum case with cut outs for gage and all accessories Ergonomic design with non-slip insulating grip Resolution:.0005" 770XTZ-1 Cat. No. EDP Range Sale Price 770XTZ /4-1" 2, Z J Cat. No. EDP Range Sale Price 3089Z J "-2.4" Z J "-6" Prices effective June 1 - August 31, 2016 Specifications subject to change.

11 DATASURE WIRELESS DATA COLLECTION DataSure Facts DataSure Wireless Data Collection consists of three primary components: Miniature radios (End Nodes) attached to the data output port of an electronic tool A Gateway that connects to a PC Routers extend the system's range and make the network more robust A Comprehensive, Robust Solution Works in almost any environment Maintains data integrity in electronically noisy shops Data receipt confirmation signal DataSure stores several readings DataSure adapts to all major electronic measuring tools "IT" friendly and easily installs on a standard PC Data Collection N Router, 916 MHZ, 120/240 VAC A-1N End Node - Starrett Opto A-2N End Node - Starrett IP67 Micrometer A-3N End Node - Starrett 3rd Generation A-4N End Node - Starrett 2700 Indicator A-5N End Node - Starrett 2000/2001/ A-6N End Node - Mitutoyo 6-Pin A-7N End Node - Mitutoyo without Absolute Encoder A-8N End Node - RS232, Jumpered Port Pins A-9N End Node - Mitutoyo IP66 Micrometer A-10N End Node - Mitutoyo IP65 Micrometer A-11N End Node - Digimatic WD/SUB 9 Pin A-12N End Node - Universal 10 Pin Connector A-13N End Node - Absolute Digimatic Indicator A-14N End Node - Mahr Federal UMAXUM Indicator A-15N End Node - Opto/Duplex A-16N End Node - Mahr Federal EX A-18N End Node - Starrett IP67 Caliper A-21N End Node - Starrett 2900 Indicator starrett.com 11

12 Gage Amps and Testers SR160 SURFACE ROUGHNESS TESTER Bluetooth Technology - Quick, reliable communication between traverse and display/ control unit Tactile measurement button Detailed graph of measurement area Charge and transfer data through PC connection, main charger and standard USB charger included Two-piece, breakaway construction for remote readings SR A COMPACT HARDNESS TESTER Combines fast test speeds coupled with ample memory and output Performs tests that easily convert to most popular hardness scales such as Rockwell, Brinell, Vickers and Shore Designed to test the hardness of large, hard metal parts USB output Automatic conversions to Rockwell, Brinell, Vicker and Shore Automatic mean value as well as Min. and Max. values 3811A Cat. No. EDP Sale Price SR , Cat. No. EDP Sale Price 3811A , ULTRASONIC THICKNESS GAGE Menu-driven, multi-functional tester with basic measurement capabilities Measures the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics and glass Accurately display readings in inch or millimeter Ideal for measuring a wall thickness that would be difficult to gage with conventional hand tools 3814 ANALOG BENCH HARDNESS TESTER Ability to hand Rockwell Scales A through H and K Stable cast iron construction Ideal basic hardness testing for many typical applications Easy to use 3812 Cat. No. EDP Sale Price , Cat. No. EDP Sale Price , Prices effective June 1 - August 31, 2016 Specifications subject to change.

13 3020 TOOLMAKERS' SQUARE This high quality toolmakers' square is not graduated and offers squareness accuracy to.0002" (0.05mm) for every 6" They feature hardened, ground and lapped stainless steel construction on both blade and beam Fitted case Length of Blade* Length of Beam Cat. No. EDP in mm in mm Sale Price / / / / / / / / *Length of blade from the inner edge of the beam to the end of the blade. C604R PRECISION RULES Spring-tempered Satin chrome finish Quick reading Rules with double row of inch figures, and each edge represents the bottom edge reading left to right (rules 1" and wider) C604R-24 Cat. No. EDP Length Sale Price C604R " C604R " C604R " C604R " C604R " C604R " Squares, Rules, protractors and Calipres C493 PROTRACTOR AND DEPTH GAGE Angular measurement is from in opposite directions allowing the direct reading of angles and supplementary angles Depths are measured from a 6" (150mm) blade Both tools have a flat surface on the back of the head premitting laying the tool flat on paper or work No-glare satin chrome finish 79 "YANKEE" SPRING-TYPE CALIPERS Made from a high steel and well finished The bow spring, although flexible, is exceedingly strong to assure reliability All sizes are available with either spring nut or solid nut The quick-adjusting, automatic-closing spring nut is designed for making fast, positive adjustments C493 79B-6 Cat. No. EDP Blade Graduations Sale Price C nds, 64ths C493B nds, 64ths Range Cat. No. EDP in mm Sale Price 79B B B starrett.com 13

14 Precision Shop Tools S830 SMALL HOLE GAGES Hardened-ball measuring surface with two-point contact Smooth, sensitive adjustment for better feel, giving more accurate measurements The adjustment of the gage beyond their range is restricted by a safety stop that prevents breakage S830FZ S830FZ Set of 5 in case S831 SMALL HOLE GAGES Hardened-ball measuring surface with two-point contact Smooth, sensitive adjustment for better feel, giving more accurate measurements The adjustment of the gage beyond their range is restricted by a safety stop that prevents breakage S831EZ S831EZ Set of 4 in case RADIUS GAGE Made of satin finish stainless steel - rust and stain resistant Each gage is clearly marked with its radius Each gage has five different gaging surfaces for both convex and concave radii All gages have precision finished raddi wtih extra smooth, accurate edges Cat. No. EDP Range Gages Sale Price S167CZ /32"-17/64"; 9/32"-1/2" S167CHZ /64"-17/64"; 9/32"-1/2" S167DZ /32"-1/2" S167MCZ mm; 8-15mm S167MCHZ mm; 8-15mm SD167GZ mm; mm SD167GHZ mm; mm S167CZ 185 TIME SAVER TAP AND DRILL GAGE Correct sizing of tap drill for any common size machine screw in "NF" National Fine or "NC" National Coarse Thread Series Leaves the right amount of stock for approximately 65% full thread Shows correct drill body size 60 holes with number sizes and decimal equivalents Hardened tool steel construction 186 DRILL AND STEEL WIRE GAGE Widely used by mechanics for twist drills and drill rod Similar to the 185, without the tap and drill information 60 holes from 1 to 60 Marked with number sizes and decimal equivalents Hardened tool steel construction 185 Cat. No. EDP Sale Price Cat. No. EDP Sale Price Prices effective June 1 - August 31, 2016 Specifications subject to change.

15 187 JOBBERS' DRILL GAGE Quick sizing of any twist drill from 1/16"-1/2" by 64ths 29 holes marked with drill size inches and decimal equivalents Rigidly tested after hardening Black matte finish with gage information steel stamped on one side and white marked on reverse side for quick, clear reading 472 SCREW PITCH GAGE Consists of a substantial steel with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch, marked on each leaf Locking device at both ends of the case, so leaves can be securely locked in position for use Leaves have a special narrow design, permitting checking internal threads in nuts, etc. as well as external threads 187 Cat. No. EDP Sale Price C391 CENTER GAGE Extremely handy for use in grinding and setting screw cutting tools Meet American National or U.S. 60, Whitworth or English 55, and Metric 60 standards Very useful for finding number of threads per inch through graduations in 14ths, 20ths, and 32nds of an inch Table of double depths of threads determining size of tap drills Made of spring-tempered steel with satin chrome finish Ground gaging surfaces C391 C American Unified National Standard, Fixed Gage Standards With locking device and 11-1/2 and 27 pipe thread pitches SCREW PITCH GAGE Consists of a substantial steel case wtih a number of folding leaves at both ends, each leaf having teeth corresponding to a definate pitch, marked on each leaf Positive stop design at both ends of the cse in position for use Leaves have special narrow design, permitting checking internal threads in nuts, etc., as well as external threads With positive stop and 11-1/2 and 27 pipe thread pitches SCREW PITCH GAGE Consists of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch, marked on each leaf Features a locking device at both ends of the case, so leaves can be securely locked in position for use Leaves have a special narrow design, permitting checking internal threads in nuts, etc., as well as external threads With locking device and 11-1/2 and 27 pipe thread pitches starrett.com 15

16 PROMO starrett.com Promotion valid through June 1 - August 31, THE L.S. STARRETT COMPANY - CORPORATE HEADQUARTERS Phone: (978) Fax: (978) Crescent Street - Athol, MA USA Promo /16 50M/Q The L.S. Starrett Company 2016 Specifications subject to change.