OUTSIDE MICROMETERS Contents

Transcription

1 J.W. DONCHIN CO W. Chicago Ave. Chicago, IL Ph: Fax: OUTSIDE Contents Pg Description Series Range 06 Electronic Micrometers (with output 733 Series 0-24 (0-600mm) 07 Electronic Micrometers (with output) 733 Series Specifications 08 Electronic Micrometers (with output) 733 Series Specifications 09 Electronic Micrometers (without output 734 Series 0-1 (0-25mm) 10 Digital Micrometers 216 Series Digital Micrometers 216M Series 0-300mm 10 Digital Micrometer Set S Digital Micrometer Set 216 Series Specifications 12 Outside Micrometers 232 Series 0-1/2 12 Outside Micrometers 232M Series 0-13mm 13 Outside Micrometers 230 Series Outside Micrometers 230M Series 0-25mm 14 Outside Micrometers 2 Series Outside Micrometers 2M Series 25-50mm 15 Outside Micrometers with attachment 2A Outside Micrometers with attachment 2MA 0-50mm 16 Micrometers with insulated frames Micrometers with insulated frames 231M 0-25mm 17 Hi-Precision Micrometer Stainless Steel Micrometers Stainless Steel Micrometers 1230M 0-25mm 18 Stainless Steel Micrometers Stainless Steel Micrometers 1212M 25-50mm 19 Quick Adjusting Micrometer 204L Outside Micrometers 226 Series Outside Micrometers 226M Series mm 21 Micrometer Sets with standards in case S226 Series Sets Micrometer Sets with standards in case S226M Series Sets 0-150mm 22 Outside Micrometers Series Outside Micrometers 436 Series Outside Micrometers 436.1M Series 0-150mm 22 Outside Micrometers 436M Series mm Continued next page.

2 J.W. DONCHIN CO W. Chicago Ave. Chicago, IL Ph: Fax: OUTSIDE Contents Pg Description Series Range 23 Outside Micrometers Series Outside Micrometers 436 Series Outside Micrometers 436.1M Series 0-150mm 24 Outside Micrometers 436M Series mm 25 Outside Micrometers 436 Series Outside Micrometers 436.1M Series 0-150mm 26 Outside Micrometers 436M Series mm 27 Outside Micrometers 436M Series mm 28 Micrometer Sets with standards, S436.1 Series Sets 0-6 in attractive, protective cases 28 Micrometer Sets with standards, S436 Series Sets 6-24 in attractive, protective cases 28 Micrometer Sets with standards, S436.1M Series Sets 0-150mm in attractive, protective cases 28 Micrometer Sets with standards, S436M Series Sets mm in attractive, protective cases 29 Outside Micrometers S436.1 Series Sets Outside Micrometers S436 Series Sets Outside Micrometers S436.1M Series Sets 0-150mm 30 Outside Micrometers S436M Series Sets 0-600mm 31 Protective Cases for 1 and 2 25 and 50mm Outside Micrometers 31 Protective Cases for 3 or 75mm and larger Outside Micrometers 32 Outside Micrometer Stand Interchangeable Anvil Micrometers 224 Series Interchangeable Anvil Micrometers 224M Series 0-600mm 34 Electronic Interchangeable Anvil 714 Series 0-24 (0-600mm) Micrometers (with output) 35 Tubular Bow Type Micrometers with 724 Series interchangeable anvils 35 Tubular Bow Type Micrometers with 724M Series mm interchangeable anvils 36 Tubular Bow Type Micrometers with 736 Series fixed anvil 36 Tubular Bow Type Micrometers with 736M Series mm fixed anvil

3 Electronic Micrometers (with output) No. 733 Series 0-24 (0-600mm) This is the Starrett No. 733 full function electronic outside micrometer with all the features and controls you need to measure, analyze and record the information you want. The anvil and spindle diameter is.250 (6.35mm). Readability Features Large, right-sized, high-contrast LCD digital readout is easy to read and reduces errors Conventional inch or millimeter graduations standard Attractive no-glare black wrinkle finish on the frame Starrett no-glare satin chrome finish on thimble and sleeve Ease-of-Handling Features Balanced frame design for comfortable and accurate measuring Ring-type knurled lock nut for quick and sure locking Smooth friction thimble for uniform pressure Gracefully designed tapered frame for use in narrow slots and tight places The 733 provides the ability to output measurements to a wide variety of peripherals and data collection devices, either through a traditional wire (above), or by connecting to a Starrett DataSure Wireless Data Collection System end node (below). Accuracy and Long-Life Features Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped carbide measuring faces Starrett designed electronic microprocessor One 3-volt battery furnished for dependable power and over one year s normal usage Automatic OFF after 30 minutes of nonuse Starrett workmanship Full Function Action Features Instant inch/millimeter conversion ME millimeter models will turn on in the millimeter mode after installation of a new battery Measurement HOLD button Ability to zero tool at any position Ability to retain and return to the true zero reading of the micrometer PRESET button to install any reading at any position Ability to install minimum and maximum limits except on straight metric models Measurement Data Output The output jack allows data transmission, either through a traditional wire or by connecting to a Starrett DataSure Wireless Data Collection System end node Output data can be used by a variety of peripherals for analysis, data collection and hard copy documentation, including: Starrett No. 772 Series Advanced Data Collection Systems Starrett No. 761 Series Data Multiplexers Other devices that support RS232C 6

4 No. 733 Series Specifications With Standard Inch Graduations on Shell and Thimble Range Resolution Inch Approx. mm Inch mm Catalog No. EDP No XFL XFL-1 W/SLC* XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ Furnished with standards. * Includes redemption card for Standard Letter of Certification (SLC). Accessories Computer Interface Cable Complete to IBM-PC (RS232C) PT Adaptor from No. PT22938 Cable to IBM-PC (RS232C) PT Shielded Cable to Nos. 761/772 Series Starrett Modules and No. PT61768 Adaptor PT One 3-Volt Battery No. CR2450 PT Description Inch Millimeter Resolution through 4 (100mm) mm Resolution over 4 (100mm) mm Accuracy** ±.0001 ±0.002mm Micrometers are furnished in protective cases. Deluxe padded case for 1" micrometer available by ordering No. 949, EDP Packed one per box with instructions. **Accuracies above 1 (25mm) are as good as setting to a gage because the mechanical and electronic components are the same on all ranges. For millimeter models, see next page. 7

5 No. 733 Series Specifications With Standard Millimeter Graduations on Shell and Thimble Range Resolution mm Approx. Inch mm Inch Catalog No. EDP No MEXFL MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ MEXFLZ Furnished with standards. Accessories Computer Interface Cable Complete to IBM-PC (RS232C) PT Adaptor from No. PT22938 Cable to IBM-PC (RS232C) PT Shielded Cable to Nos. 761/772 Series Starrett Modules and No. PT61768 Adaptor PT One 3-Volt Battery No. CR2450 PT Description Millimeter Inch Resolution through 100mm (4 ) 0.001mm Resolution over 100mm (4 ) 0.001mm.0001 Accuracy* ±0.002mm ±.0001 *Accuracies above 25mm (1 ) are as good as setting to a gage because the mechanical and electronic components are the same on all ranges. Micrometers are furnished in protective cases. Deluxe padded case for 25mm micrometer available by ordering No. 957, EDP Packed one per box with instructions. 8

6 Electronic Micrometers (without output) No. 734 Series 0-1 (0-25mm) This tool is a basic electronic micrometer. It has no output but has all the ease of handling and accuracy features of the No. 733 full function micrometer. Action Features ON/OFF button also automatic OFF after 30 minutes of nonuse Instant inch/millimeter conversion except on straight millimeter model Measurement HOLD button Ability to zero tool at any position Specifications Description Inch Millimeter Resolution mm Accuracy ±.0001 ±0.002mm Catalog No. EDP No. Range Description 734XFL , 0-25mm Inch and millimeter measurements 734MXFL mm Millimeter only measurements Case Only PT One 3-Volt Battery No. CR2450 Sent in fitted case. Deluxe padded case available by ordering No. 949, EDP

7 Digital Micrometers No. 216 Series 0-12 No. 216M Series 0-300mm This is the Starrett mechanical digital micrometer simple to use even by the inexperienced. The anvil and spindle are sized at.250 (6.35mm). Readability Features Clear, easily read numbers reduce errors No-glare black finish on the frame Starrett no-glare satin chrome finish on thimble and sleeve.001 or.01mm is read directly from the counter.0001 or.001mm is read from the vernier scale on the micrometer sleeve Ease-of-Handling Features Balanced frame design for comfortable and accurate measuring Ring-type knurled lock nut for quick and sure locking Available in inch and millimeter models. Shown above: top, No. T216XFL-2 (2 model); bottom, No. 216MXRL-25 (25mm model). A choice of smooth friction thimble for uniform pressure on the 1-4 sizes or the combination ratchet and speeder for uniform pressure and quicker adjustment on all sizes Gracefully designed tapered frame for use in narrow slots and tight places Accuracy and Long-Life Features Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Starrett workmanship Digital Micrometer Set No. S Set of three digital micrometers furnished with ratchet stop, lock nut, and standards, in case. Set consists of three micrometers: 0-1, 1-2, and is read directly from the counter.0001 is read from the sleeve Clear, easily read numbers Balanced frame design and extremely hard and stable one-piece spindle Micro-lapped carbide measuring faces Catalog No. EDP No. Description ST216AXRLZ Set 0-3,.0001 Grad., Carbide Faces, Ratchet Stop, Lock Nut, with Standards, in Case 10

8 No. 216 Series Specifications Graduation Ratchet Stop and Friction Thimble and Measuring Lock Nut Lock Nut Plain Case Only Range Faces Catalog No. EDP No. Catalog No. EDP No. Cat. No. EDP No. Cat. No. EDP No. 0-1 Steel 216RL FL P Carbide 216XRL XFL RL FL ZZ RL FL Steel 216RL FL RL RL XRL XRL XRL Carbide 216XRL XRL XRL Graduation T216XRL T216XFL T216XRL-1 W/SLC* T216XFL-1 W/SLC* T216XRL T216XFL ZZ T216XRL T216XFL T216XRL T216XFL T216XRL Carbide T216XRL T216XRL T216XRL T216XRL T216XRL T216XRL T216XRL Graduation mm 0-25mm 216MXRL MXFL mm 216MXRL ZZ mm 216MXRL mm 216MXRL mm 216MXRL mm 216MXRL mm Carbide 216MXRL mm 216MXRL mm 216MXRL mm 216MXRL mm 216MXRL mm 216MXRL Graduation mm 0-25mm V216MXRL V216MXFL mm V216MXRL ZZ mm Carbide V216MXRL mm V216MXRL NOTE: * Includes redemption card for Standard Letter of Certification (SLC). No. 234 (inch) and No. 234M (millimeter) standards are available. 1 and 25mm models are sent in fitted case. Deluxe padded case available by ordering No. 942, EDP All other models are sent without case, unless otherwise ordered. Packed one in a box. 11

9 No. 232 Series No. 232M Series OUTSIDE 0-1/2 0-13mm These micrometers are the 1/2 (13mm) companions of the top-of-the-line No. 230 series micrometers. The spindle and anvil are sized at.200 (5mm). Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Convenient decimal equivalents on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking Combination ratchet and speeder for uniform pressure and quicker adjustment Gracefully designed tapered frame for use in narrow slots and tight places Accuracy and Long-Life Features Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Starrett workmanship No. 232 is available in inch and millimeter models. Shown (top) No. 232RL and (bottom) No. 232MRL. 0-1/2" range Catalog No. EDP No. Graduation Description 232RL T232RL T232XRL 50968, Carbide Faces 0-13mm range 232MRL mm V232MXRL mm, Carbide Faces Packed one in a box. Attractive, protective case available by ordering No. 921, EDP

10 No. 230 Series No. 230M Series mm This is the jewel of precision micrometers used by skilled workmen worldwide. The spindle and anvil are sized at.235 (6mm) to reach places most micrometers cannot reach. Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Quick-reading figures every thousandth numbered on inch tools Convenient decimal equivalents on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking A choice of smooth friction thimble for uniform pressure or the combination ratchet and speeder for uniform pressure and quicker adjustment Gracefully designed tapered frame for use in narrow slots and tight places Accuracy and Long-Life Features Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Starrett workmanship Shown above (top) inch model No. T230RL and (bottom) mm model No. V230MXFL. 0-1 range Catalog No. EDP No. Graduation Description 230P Plain 230RL FL Friction Thimble, Lock Nut T230RL T230XRL 50944, Carbide Faces T230XRL W/SLC 64401, Carbide Faces, Standard Letter of Certification*.0001 T230FL Friction Thimble, Lock Nut T230XFL Friction Thimble, Lock Nut, Carbide Faces T230XFL W/SLC Friction Thimble, Lock Nut, Carbide Faces, Standard Letter of Certification* 0-25mm range V230MXRL 56017, Carbide Faces V230MXFL mm Friction Thimble, Lock Nut, Carbide Faces CASE Case for 1 (25mm) Micrometers * Includes redemption card for Standard Letter of Certification (SLC). Sent in fitted case. Deluxe padded case available by ordering No. 910, EDP

11 No. 2 Series No. 2M Series OUTSIDE mm These micrometers are the 2 (50mm) companions of the top-of-the-line No. 230 micrometer series. The spindle and anvil are sized at.235 (6mm) to reach places other micrometers cannot. Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered and distinct figures for precise and easy readability Convenient decimal equivalents on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking A choice of smooth friction thimble for uniform pressure or the combination ratchet and speeder for uniform pressure and quicker adjustment Gracefully designed tapered frame for use in narrow slots and tight places Accuracy and Long-Life Features Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Gage block standard furnished with micrometers Starrett workmanship The No. 2 Micrometer is available in inch and millimeter models. Left, No. T2XRL; right, No. 2MXRL. 1-2 range Catalog No. EDP No. Graduation Description T2XRL T2XFL , Carbide Faces, 1 Gage Block Standard Friction Thimble, Lock Nut, Carbide Faces, 1 Gage Block Standard 2G Gage Block Standard only 25-50mm range 2MXRL mm V2MXRL mm, Carbide Faces, 25mm Gage Block Standard, Carbide Faces, 25mm Gage Block Standard 2MG mm Gage Block Standard only CASE Case for 2 and 50mm Micrometers Packed one in a box; sent without case Attractive, protective case available by ordering No. 912, EDP

12 Outside Micrometers with attachment No. 2A 0-2 No. 2MA 0-50mm These micrometers are versions of the Nos. 2 and 2M that include an attachment to handle measurements from 0-1 or 0-25mm, thereby extending the total range from 0-2 or 50mm. Easily and quickly attached to the anvil of the micrometer, it is only necessary to tighten a locking screw to make the conversion. The anvil extension is hardened, ground and lapped. No-glare satin chrome finish. The No. 2ARL with attachment. 0-2 range Catalog No. EDP No. Graduation Description, Carbide Anvil and Spindle, 2ARL Hardened Steel Attachment, 1 Gage Block Standard 2G Gage Block Standard only 0-50mm range 2MARL mm, Carbide Anvil and Spindle, Hardened Steel Attachment, 25mm Gage Block Standard 2MG mm Gage Block Standard only Packed one in a box; sent without case. Padded deluxe case for 2 and 50mm micrometers available by ordering No. 912, EDP

13 Micrometers with insulated frames No No. 231M 0-25mm This is a slightly heavier micrometer with thermal insulators mounted on the frame front and rear. This spindle and anvil are sized at.250 (6.35mm). Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Quick-reading figures every thousandth numbered on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking A combination ratchet and speeder for uniform pressure and quicker adjustment on all sizes Gracefully designed tapered frame for use in narrow slots and tight places 0-1 range Catalog No. EDP No. Graduation Description T231XRL , Carbide Faces 0-25mm range V231MXRL mm, Carbide Faces Accuracy and Long-Life Features Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Starrett workmanship Sent in fitted case. Deluxe padded case available by ordering No. 942, EDP

14 Hi-Precision Micrometer No No. 221 Hi-Precision Micrometer permits direct readings in ten-thousandths of an inch (.0001 ) without a vernier, plus automatic control of spindle pressure. A D This micrometer features a black graduated inner thimble and sleeve reading in thousandths and a red graduated outer thimble and sleeve with large, widely spaced graduations which give direct readings in ten-thousandths. It also features an exclusive constant pressure mechanism which eliminates feel and automatically insures consistent spindle pressure for every measurement. Extremely easy to use. Readability Features Precise instant, direct readings in tenthousandths of an inch (.0001 ) no vernier readings necessary Gives constant spindle pressure for all readings Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Convenient decimal equivalents on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking Gracefully designed tapered frame for use in narrow slots and tight places Accuracy and Long-Life Features Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Starrett workmanship How to Read a Starrett Hi-Precision Micrometer This micrometer is accurate within throughout the range. (1) Using the micrometer conventionally, bring the measuring faces up snug to the piece being measured, and then load the micrometer by continuing to rotate the red graduated thimble through ten of its divisions. (There are four equally spaced red reading lines on the.0001 reading sleeve and four sets of numbered red graduations on the.0001 thimble reading zero to nine. This allows you to read the.0001 graduations no matter what position the micrometer is held.) (2) Hold this loaded position and now observe the black.001 graduations on the inner thimble in relation to the reading line on the sleeve. Slowly let the red graduated thimble return until the first black thimble graduation aligns with the black reading line on the sleeve. Now hold this position with the black graduations aligned. C B A. Inner Sleeve B. Inner (Black) Thimble C. Black.001 reading line D. Outer sleeve with four equally spaced red.0001 reading lines E. Red Graduated Thimble (3) At this point the black graduations will be your.001 reading and you can then take the.0001 reading directly from the red graduated thimble as it lines up to the red reading lines at any one of the four positions, and add it to the.001 reading. CAUTION: Do not force the red graduated thimble if you feel it hit the stop. Also, do not at any time let the red graduated thimble snap back from its loaded position. Damage could occur due to either circumstance. E NOTE: Constant pressure mechanism available on micrometers in larger sizes on special order. Catalog No. EDP No. Graduation Description T221XL Lock Nut, Carbide Faces Sent in fitted case. Deluxe padded case available by ordering No. 910, EDP

15 Stainless Steel Micrometers No No. 1230M OUTSIDE 0-25mm No No. 1212M 25-50mm This micrometer is made from stainless steel for use under adverse atmospheric and operating conditions. Readability Features Satin finish stainless steel no glare rust and stain resistant Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Convenient decimal equivalents on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking The combination ratchet and speeder for uniform pressure and quicker adjustment Gracefully designed tapered frame for use in narrow slots and tight places Accuracy and Long-Life Features Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle (the heart of our accuracy) Carbide measuring faces Quick and easy adjustment Starrett workmanship Top: No. 1230XRL; Bottom No. T1212XRL. 0-1 range Catalog No. EDP No. Graduation Description 1230XRL , Carbide Faces T1230XRL , Carbide Faces 0-25mm range V1230MXRL mm, Carbide Faces 1-2 range 1212XRL T1212XRL , Carbide Faces, Gage Block Standard, Carbide Faces, Gage Block Standard 25-50mm range V1212MXRL mm, Carbide Faces, Gage Block Standard 1 and 25mm Models sent in fitted case 2 and 50mm Models packed one in a box without case. Deluxe padded cases available by ordering No. 910, EDP for No.1230 and No. 912, EDP for No

16 Quick Adjusting Micrometer No. 204L 0-1 By pressing the plunger on the end of the thimble, the spindle is instantly disengaged and can be adjusted by sliding the spindle in or out to any desired setting. This speeds measurements since rotation of the thimble is only required for final size adjustment. Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Quick-reading figures every thousandth numbered on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking Gracefully designed tapered frame for use in narrow slots and tight places Catalog No. EDP No. Graduation Description 204L Lock Nut Accuracy and Long-Life Features Rigid one-piece frame of drop forged steel Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Starrett workmanship Sent in fitted case. Deluxe padded case available by ordering No. 942, EDP

17 No. 226 Series No. 226M Series mm OUTSIDE 1-6 This series of micrometers features rugged construction and extremely attractive design. These micrometers are for those craftsmen who want a precision micrometer with a different and outstanding Starrett design and finish. The micrometer s strong ribbed frame has a smooth black enamel finish with polished steel ribs and hub. Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Quick-reading figures every thousandth numbered on inch tools Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking Accuracy and Long-Life Features Rugged frame ribbed for extra strength Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Starrett workmanship These tools are also available in sets as specified on the next page. Graduation Ratchet Stop and Lock Nut Standard (extra) Range Catalog No. EDP No. Catalog No. EDP No. 0-1" 226RL RL B RL B RL B RL B RL B Graduation , With Carbide Faces 0-1" T226XRL T226XRL B T226XRL B T226XRL B T226XRL B T226XRL B Graduation mm, With Carbide Faces 0-25mm V226MXRL mm V226MXRL MB mm V226MXRL MB mm V226MXRL MB mm V226MXRL MB mm V226MXRL MB Packed one in a box without case attractive, protective cases are available by ordering: No. 910, EDP for the 1 (25mm) No. 913, EDP for the 2 (50mm) No. 922, EDP for the 3 (75mm) No. 952, EDP for the 4 (100mm) No. 953, EDP for the 5 (125mm) No. 954, EDP for the 6 (150mm) 20

18 Micrometer Sets with standards in case No. S226 Series Sets 0-6 No. S226M Series Sets 0-150mm These sets are recommended for mechanics, automotive service and machine shops, toolrooms, inspection departments, and wherever gaging involves a wide range of measurements. All sets come with attractive, protective cases that keep micrometer and standards together, readily accessible. Set shown here is No. S226ARLZ, 0-3 range. 0-3 range Range Catalog No. EDP No. Graduation Description Set Description S226ARLZ Includes 1,2 and 3 Micrometers, 0-3 ST226AXRLZ , Two Standards, Adjusting Wrench, in Case Carbide Faces 0-6 range S226BRLZ Includes 1,2,3,4,5 and 6 Micrometers, 0-6 ST226BXRLZ , Set of Five Standards, Adjusting Wrench, in Case Carbide Faces 0-75mm range 0-75mm SV226MAXRLZ mm, Includes 25mm, 50mm and 75mm Micrometers, Carbide Faces Two Standards, Adjusting Wrench, in Case 0-150mm range 0-150mm SV226MBXRLZ mm, Includes 25mm, 50mm, 75mm, 100mm, 125mm Carbide Faces and 150mm Micrometers, Set of Five Standards, Adjusting Wrench, in Case CASES ONLY Case for 0-3 and 0-75mm Micrometer Sets Case for 0-6 and 0-150mm Micrometer Sets 21

19 No Series No. 436 Series No M Series 0-150mm No. 436M Series mm These are the most popular precision micrometers used by skilled workmen worldwide. They are accurate, rugged, and easy to use. The 0-6 sizes and 0-150mm sizes have rugged spindles and anvils sized at.250 (6.35mm) diameter. No other micrometer manufacturer can match the breadth and depth of the Starrett product line. We also stand willing and able to meet special requirements upon request. Readability Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Ease-of-Handling Balanced frame and thimble design insure easy handling Ring-type knurled lock nut for quick and sure locking Smooth friction thimble for uniform pressure, the combination ratchet and speeder for uniform pressure and quicker adjustment, or a plain micrometer that depends on your own feel Gracefully designed tapered frame for use in narrow slots and tight places Accuracy and Long-Life Rigid steel frame ribbed for extra strength on sizes through 6 (150mm) Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy adjustment Starrett workmanship Shown above, top, No MRL-50 millimeter model; bottom, Inch model No FL range Catalog No. EDP No. Graduation Description 436.1P Plain 436.1XP Plain, Carbide Faces 436.1RL XRL , Carbide Faces 436.1XRL-1 W/SLC 67995, Carbide Faces, Standard Letter of Certification* 436.1FL Friction Thimble, Lock Nut T436.1XP Plain, Carbide Faces T436.1XRL , Carbide Faces T436.1XRL-1 W/SLC 67998, Carbide Faces,.0001 Standard Letter of Certification* T436.1XFL Friction Thimble, Lock Nut, Carbide Faces T436.1XFL-1 W/SLC Friction Thimble, Lock Nut, Carbide Faces, Standard Letter of Certification* * Includes redemption card for Standard Letter of Certification (SLC). 1-6 and mm models sent in fitted plastic case. Deluxe padded case for 1 and 25mm sizes available by ordering No and 175mm up to 12 and 300mm models sent without case, packed one each to a box. See individual listings on following pages to order cases only. 13 and 325mm up to 24 and 600mm models furnished in attractive, protective case. Also, see detailed case information within the following pages. 22

20 No Series range 2-3 range Catalog No. EDP No. Catalog No. EDP No. Graduation Description 436.1P P Plain 436.1RL RL XRL XRL , Carbide Faces 436.1FL FL Friction Thimble, Lock Nut T436.1XRL T436.1XRL , Carbide Faces T436.1XRL-2 W/SLC T436.1XRL-3 W/SLC 68014, Carbide Faces, Standard Letter of Certification*.0001 T436.1XFL T436.1XFL Friction Thimble, Lock Nut, Carbide Faces T436.1XFL-2 W/SLC T436.1XFL-3 W/SLC Friction Thimble, Lock Nut, Carbide Faces, Standard Letter of Certification* 234B Standard for 2 Micrometers 234B Standard for 3 Micrometers CASES Case for 2 Micrometer Case for 3 Micrometer 3-4 range 4-5 range 436.1RL RL XRL XRL , Carbide Faces T436.1XRL T436.1XRL , Carbide Faces T436.1XRL-4 W/SLC T436.1XRL-5 W/SLC 68026, Carbide Faces, Standard Letter of Certification*.0001 T436.1XFL T436.1XFL Friction Thimble, Lock Nut, Carbide Faces T436.1XFL-4 W/SLC T436.1XFL-5 W/SLC Friction Thimble, Lock Nut, Carbide Faces, Standard Letter of Certification* 234B Standard for 4 Micrometers 234B Standard for 5 Micrometers CASES Case for 4 Micrometer Case for 5 Micrometer 5-6 range 436.1RL XRL , Carbide Faces T436.1XRL , Carbide Faces T436.1XRL-6 W/SLC 68032, Carbide Faces, Standard Letter of Certification*.0001 T436.1XFL Friction Thimble, Lock Nut, Carbide Faces T436.1XFL-6 W/SLC Friction Thimble, Lock Nut, Carbide Faces, Standard Letter of Certification* 234B Standard for 6 Micrometers CASE Case for 6 Micrometer * Includes redemption card for Standard Letter of Certification (SLC). NOTE: 1-6 models sent in fitted plastic case. 23

21 No. 436 Series No M Series 0-150mm No. 436M Series mm 6-24 These micrometers have the same balanced design as the smaller sizes but proportioned to these larger sizes. They have.300 (7.6mm) anvil and spindle diameters for ease of use on larger work. These sizes have all the features of the 0-6" and 0-150mm ranges No Series Micrometers, except: The larger sizes are furnished with the combination ratchet and speeder for uniform pressure and quicker adjustment Rigid and stable special cast iron frame with perforations for lightness and ribbed for strength and stability Model No. 436RL range 7-8 range Catalog No. EDP No. Catalog No. EDP No. Graduation Description 436RL RL XRL XRL , Carbide Faces T436XRL T436XRL , Carbide Faces 234B Standard for 7 Micrometers 234B Standard for 8 Micrometers CASES Case for 7 Micrometers Case for 8 Micrometers 8-9 range 9-10 range 436RL RL XRL XRL , Carbide Faces T436XRL T436XRL , Carbide Faces 234B Standard for 9 Micrometers 234B Standard for 10 Micrometers CASES Case for 9 Micrometers Case for 10 Micrometers NOTE: 7-12 models sent without case, packed one each to a box. See individual micrometer listing for case information. 24

22 No. 436 Series range range Catalog No. EDP No. Catalog No. EDP No. Graduation Description 436RL RL XRL XRL , Carbide Faces T436XRL T436XRL , Carbide Faces 234B Standard for 11 Micrometers 234B Standard for 12 Micrometers CASES Case for 11 Micrometers Case for 12 Micrometers range range 436XRLZ XRLZ , Carbide Faces, with Case 234B Standard for 13 Micrometers 234A Standard for 14 Micrometers range range 436XRLZ XRLZ , Carbide Faces, with Case 234A Standard for 15 Micrometers 234A Standard for 16 Micrometers range range 436XRLZ XRLZ , Carbide Faces, with Case 234A Standard for 17 Micrometers 234A Standard for 18 Micrometers range range 436XRLZ XRLZ , Carbide Faces, with Case 234A Standard for 19 Micrometers 234A Standard for 20 Micrometers range range 436XRLZ XRLZ , Carbide Faces, with Case 234A Standard for 21 Micrometers 234A Standard for 22 Micrometers range range 436XRLZ XRLZ , Carbide Faces, with Case 234A Standard for 23 Micrometers 234A Standard for 24 Micrometers NOTE: models are furnished in a case at no extra charge. 25

23 No M Series No. 436M Series mm mm 0-25mm range25-50mm range Catalog No. EDP No. Catalog No. EDP Graduation Description 436.1MP Plain 436.1MRL MRL MXRL MXRL mm, Carbide Faces 436.1MXFL Friction Thimble, Lock Nut, Carbide Faces V436.1MXRL V436.1MXRL mm, Carbide Faces CASE 50-75mm range 234MB mm Standard for 50mm Micrometers Case for 50mm Micrometers mm range 436.1MRL MRL MXRL MXRL mm, Carbide Faces V436.1MXRL V436.1MXRL mm, Carbide Faces 234MB mm Standard for 75mm Micrometers 234MB mm Standard for 100mm Micrometers CASES Case for 75mm Micrometers Case for 100mm Micrometers mm range mm range 436.1MRL MRL MXRL MXRL mm, Carbide Faces V436.1MXRL V436.1MXRL mm, Carbide Faces 234MB mm Standard for 125mm Micrometers 234MB mm Standard for 150mm Micrometers CASES Case for 125mm Micrometers Case for 150mm Micrometers mm range mm range 436MXRL MXRL mm, Carbide Faces 234MB mm Standard for 175mm Micrometers 234MB mm Standard for 200mm Micrometers CASES Case for 175mm Micrometers Case for 200mm Micrometers mm range OUTSIDE mm range NOTE: All products made in the U.S. A. 436MXRL MXRL mm, Carbide Faces 234MB mm Standard for 225mm Micrometers 234MB mm Standard for 250mm Micrometers CASES Case for 225mm Micrometers Case for 250mm Micrometers NOTEs: mm models sent in fitted plastic case mm models sent without case, packed one each to a box. See individual micrometer listing for case information. except where noted as Global.

24 No. 436M Series mm range mm range Catalog No. EDP No. Catalog No. EDP No. Graduation Description 436MXRL MXRL mm, Carbide Faces 234MB mm Standard for 275mm Micrometers 234MB mm Standard for 300mm Micrometers CASES Case for 275mm Micrometers Case for 300mm Micrometers mm range mm range 436MXRLZ MXRLZ mm, Carbide Faces, with Case 234MB mm Standard for 325mm Micrometers 234MA mm Standard for 350mm Micrometers mm range mm range 436MXRLZ MXRLZ mm, Carbide Faces, with Case 234MA mm Standard for 375mm Micrometers 234MA mm Standard for 400mm Micrometers mm range mm range 436MXRLZ MXRLZ mm, Carbide Faces, with Case 234MA mm Standard for 425mm Micrometers 234MA mm Standard for 450mm Micrometers mm range mm range 436MXRLZ MXRLZ mm, Carbide Faces, with Case 234MA mm Standard for 475mm Micrometers 234MA mm Standard for 500mm Micrometers mm range mm range 436MXRLZ MXRLZ mm, Carbide Faces, with Case 234MA mm Standard for 525mm Micrometers 234MA mm Standard for 550mm Micrometers mm range mm mm range 436MXRLZ MXRLZ mm, Carbide Faces, with Case 234MA mm Standard for 575mm Micrometers 234MA mm Standard for 600mm Micrometers NOTE: mm models are furnished in a case at no extra charge. 27

25 Micrometer Sets with standards, in attractive, protective cases No. S436.1 Series Sets 0-6 No. S436 Series Sets 6-24 No. S436.1M Series Sets 0-150mm No. S436M Series Sets mm Recommended for mechanics, automotive service and machine shops, toolrooms, inspection departments, and wherever gaging involves a wide range of measurements. All sets come with attractive, protective cases which keep micrometers and standards together, readily accessible. For further information on each type of micrometer, refer to its listing on the previous Nos and 436 Series pages. Box type cases available for sets 0-6, 6-12, with 6, 12, or 24 micrometers and flat type cases available for sets 0-3 or 0-4 with 3 or 4 micrometers. 0-3 range Catalog No. EDP No. Graduation Description Set Description S436.1ARLZ Each Set Includes:.001 S436.1AXRLZ 68036, Carbide Faces 1,2 and 3 Micrometers, with Two Standards, in Case ST436.1AXRLZ 68037, Carbide Faces.0001 ST436.1AXFLZ Friction Thimble, Lock Nut, Carbide Faces S234C Set of Two Standards Only CASE ONLY Case Only for No. S436A Sets 0-4 range S436.1BRLZ Each Set Includes:.001 S436.1BXRLZ 68040, Carbide Faces 1,2,3 and 4 Micrometers, with Three Standards, in Case ST436.1BXRLZ 68041, Carbide Faces.0001 ST436.1BXFLZ Friction Thimble, Lock Nut, Carbide Faces S234D Set of Three Standards Only CASE ONLY Case Only for No. S436B Sets 28

26 No. S436.1 Series Sets No. S436 Series Sets 0-6 range Catalog No. EDP No. Graduation Description Set Description S436.1CRLZ S436.1CXRLZ 68044, Carbide Faces ST436.1CXRLZ 68045, Carbide Faces.0001 ST436.1CXFLZ Friction Thimble, Lock Nut, Carbide Faces Each Set Includes: 1,2,3,4,5 and 6 Micrometers, with Five Standards, in Case S234E Set of Five Standards Only S234E W/SLC With Standard Letter of Certification* CASE ONLY Case Only for No. S436C Sets 0-12 range S436ERLZ Each Set Includes:.001 S436EXRLZ 52012, Carbide Faces 1,2,3,4,5,6,7,8,9,10, 11 and 12 Micrometers, ST436EXRLZ , Carbide Faces with Eleven Standards, in Case S234G Set of Eleven Standards Only S234G W/SLC With Standard Letter of Certification* CASE ONLY Case Only for No. S436E Sets 6-12" range S436DRLZ S436DXRLZ 64463, Carbide Faces ST436DXRLZ , Carbide Faces Each Set Includes: 7,8,9,10,11 and 12 Micrometers, with Six Standards, in Case S234F Set of Six Standards Only S234F W/SLC With Standard Letter of Certification* CASE ONLY Case Only for No. S436D Sets range S436FXRLZ , Carbide Faces S234J Set of Twelve Standards Only CASE ONLY S436FZZ Case Only for No. S436F Sets Set Includes: 13,14,15,16,17,18,19,20, 21,22,23 and 24 Micrometers, with Twelve Standards, in Case * Includes redemption card for Standard Letter of Certification (SLC). 29

27 0-75mm range Catalog No. EDP No. Graduation Description Set Description S436.1MARLZ mm S436.1MAXRLZ 68068, Carbide Faces SV436.1MAXRLZ mm, Carbide Faces S234MC Set of Two Standards Only CASE ONLY OUTSIDE SPECIAL FUNCTION No. S436.1M Series Sets No. S436M Series Sets 0-150mm 0-600mm Case Only for No. S436MA Sets Each Set Includes: 25mm, 50mm and 75mm Micrometers, with Two Standards, in Case 0-100mm range S436.1MBRLZ mm S436.1MBXRLZ 68071, Carbide Faces SV436.1MBXRLZ mm, Carbide Faces S234MD Set of Three Standards Only CASE ONLY Case Only for No. S436MB Sets 0-150mm range S436.1MCRLZ mm S436.1MCXRLZ 68074, Carbide Faces SV436.1MCXRLZ mm, Carbide Faces S234ME Set of Five Standards Only CASE ONLY Case Only for No. S436MC Sets Each Set Includes: 25mm, 50mm, 75mm and 100mm Micrometers with Three Standards, in Case Each Set Includes: 25mm, 50mm, 75mm, 100mm, 125mm and 150mm Micrometers, with Five Standards, in Case 0-300mm range S436MEXRLZ mm, Carbide Faces Set Includes: 25, 50, 75, 100, 125, 150, 175, 200, 225, S234MG Set of Eleven Standards Only 250, 275 and 300mm Micrometers, with Eleven Standards, in Case CASE ONLY Case Only for No. S436ME Sets mm range S436MDXRLZ mm, Carbide Faces Set Includes: 175, 200, 225, 250, 275 and 300mm S234MF Set of Six Standards Only Micrometers, with Six Standards, in Case CASE ONLY Case Only for No. S436MD Sets mm range S436MFXRLZ mm, Carbide Faces Set Includes: 325, 350, 375, 400, 425, 450, 475, 500, S234MJ Set of Twelve Standards Only 525, 550, 575 and 600mm Micrometers, with Twelve Standards, in Case CASE ONLY S436FZZ Case Only for No. S436MF Set 30

28 Protective Cases for 1 and 2 25 and 50mm Outside Micrometers These deluxe padded cases give protection against scratches, damage, dirt and grit. Rigid, substantial construction. Rugged leather holster also available for convenience. No. 910 case. Leather Holster. Packed one in a box. Catalog No. EDP No. Description Case for 1 (25mm) Micrometers - Nos. 204, 210, 211, 221, 230, 256, 436.1, 569, 575, 577, Case for 2 (50mm) Micrometers - Nos. 2, 2A, 256, 585, Case for 2 (50mm) Micrometers - Nos. 226, 436.1, Leather holster for 1 (25mm) Micrometers Protective Cases for 3 or 75mm and larger Outside Micrometers Cases to store and protect large size Starrett micrometers are made to the same high standard of workmanship as the tools they contain. Recesses hold not only the micrometer, but also matching standard plus an adjusting wrench. (Available with most micrometers see individual micrometer listings and separate price book for information.) Similar attractive, protective cases are provided for micrometers purchased in sets. 31

29 Outside Micrometer Stand No. 206 Features This stand converts outside micrometers to a sturdy bench gage for batch inspection of small parts Useful as a handy bench vise or assembly fixture Gripping surfaces are two nylon pads which are replaceable Ball joint construction allows the tilting head to be positioned as much as 45 off perpendicular in any direction Positive lock on the base Base dimension is 5 3/8 long x 3 wide x 3/4 thick (136mm long x 76mm wide x 19mm thick) Tilting head clamping capability is 3/8 (9.5mm) thick x 1 (25mm) throat depth Accommodates all Starrett 1/2 (13mm) and 1 (25mm) outside micrometers, Nos. 2 and 2A 2 outside micrometers and Nos. 210, 220, 483, 485, 569 special purpose outside micrometers Catalog No. EDP No. Description Outside Micrometer Stand Packed one in a box. 32

30 Interchangeable Anvil Micrometers No. 224 Series 0-24 No. 224M Series 0-600mm Unusual flexibility, plus a wide range of measurement makes the Starrett No. 224 series satin-chrome micrometers very popular in machine or automotive repair shops and for all applications requiring a versatile micrometer. Each micrometer is equipped with a series of easily interchangeable anvils, thus providing the full range in steps of 1 or 25mm with a single micrometer. Suitable wrenches are furnished to make necessary adjustments. These larger sizes have.300 (7.6mm) anvil and spindle diameters for ease of use on larger work. Readability features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Large thimble diameter with distinct figures Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking Combination ratchet and speeder for uniform pressure and quicker adjustment Accuracy and Long-Life Features Rigid and stable special cast iron frame with appropriate perforations for lightness and ribbed for strength and stability Extremely hard and stable one-piece spindle (the heart of our accuracy) Interchangeable anvils Micro-lapped measuring faces Quick and easy sleeve adjustment Starrett workmanship Starrett wide range, perforated frame micrometers are available in inch and millimeter models. Shown above is the No. 224CRLZ 9-12 model with standards and interchangeable anvils range With Ratchet Stop, Lock Nut, In Case Range Graduation Catalog No. EDP No. No. 234 Standards Furnished AARLZ ,2, ARLZ ,3,4, BRLZ ,7, GRLZ ,7,8,9,10, CRLZ ,10, DRLZ ,13,14, ERLZ ,17,18, JRLZ ,21,22, mm range 0-100mm 224MAARLZ , 50, 75mm mm 224MARLZ , 75, 100, 125mm mm 0.01mm 224MGRLZ , 175, 200, 225, 250, 275mm mm 224MDRLZ , 325, 350, 375mm mm 224MERLZ , 425, 450, 475mm mm 224MJRLZ , 525, 550, 575mm Furnished with No. 234 Standards in protective case. Packed one in a box. 33

31 Electronic Interchangeable Anvil Micrometers (with output) No. 714 Series 0-24 (0-600mm) This micrometer is the same as our No. 224 Series except that it has an electronic readout and the following extra features and benefits: Readability Features Large, right-sized, high-contrast LCD digital readout is easy to read and reduces errors Resolution and 0.001mm Conventional inch or millimeter graduations standard Attractive no-glare black wrinkle finish on the frame Starrett no-glare satin chrome finish on thimble and sleeve Accuracy and Long-Life Features Starrett designed electronic microprocessor One 3-volt battery furnished for dependable power and over one year s normal usage Automatic OFF after 30 minutes of nonuse Starrett workmanship Full-Function Action Features Instant inch/millimeter conversion ME millimeter models will turn on in the millimeter mode after installation of a new battery Measurement HOLD button Ability to zero tool at any position Ability to retain and return to the true zero reading of the micrometer PRESET button to install any reading at any position Ability to install minimum and maximum limits Output data to Starrett SPC Plus hardware and software and to PCs Works well with Starrett DataSure Wireless Data Collection Systems Micrometer furnished in protective case with No. 234 Standards. Packed one in a box with instructions. No. 714AFLZ Micrometer with No. 234 Standards. With Standard Inch Graduations on Shell and Thimble Range Resolution Inch Approx. mm Inch mm Catalog No. EDP No mm AAFLZ mm 714AFLZ mm 714BFLZ mm 714GFLZ mm mm 714CFLZ mm 714DFLZ mm 714EFLZ mm 714JFLZ With Standard Millimeter Graduations on Shell and Thimble Range Resolution mm Approx. Inch mm Inch Catalog No. EDP No mm MEAAFLZ mm MEAFLZ mm MEGFLZ mm mm MEDFLZ mm MEEFLZ mm MEJFLZ Cable Information Part No. EDP No. Description PT Computer Interface Cable Complete to IBM-PC (RS232C) PT Adaptor from No. PT22938 Cable to IBM-PC (RS232C) PT Shielded Cable to Nos. 761/772 Series Starrett Modules and No. PT61768 Adaptor PT One 3-Volt Battery No. CR

32 Tubular Bow Type Micrometers with interchangeable anvils No. 724 Series No. 724M Series mm These micrometers are made for better precision measurement of LARGE outside dimensions. They provide perfect balance, sensitive feel, ease of handling, and less measuring effort due to their advanced tubular design. Frames are built of special steel formed to exacting tubular design specifications and welded by a carefully controlled process. This produces a hollow tubular frame of the lightest weight, extreme rigidity, and standard coefficient of expansion. Because of the interchangeable anvils, the No. 724 Series is well suited for diversified gaging and provides a wide range of measurement in steps of 1 inch or 25mm. The micrometer head is large and well balanced with.300 (7.6mm) diameter anvil and spindle and with larger bearing surfaces on the threads. Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Large thimble diameter with distinct figures Ease-of-Handling Features Balanced frame and thimble design for easy handling and better readability Ring-type knurled lock nut for quick and sure locking Accuracy and Long-Life Features Hollow tubular frame design combining lightest possible weight with rigidity Extremely hard and stable one-piece spindle (the heart of our accuracy) Interchangeable anvils for diversified gaging Standards with insulated grips Micro-lapped measuring faces Quick and easy sleeve adjustment Starrett workmanship Furnished with No. 234 Standards in attractive, protective case. Packed one in a box. No. 724LZ model with interchangeable anvils and standards. It is recommended that these micrometers be checked with standards in the approximate position (vertical or horizontal) that they will be used. With Lock Nut, In Case We do not recommend.0001 or 0.001mm readings on these micrometers. Larger sizes, carbide faces and ratchet stop are available on special order. Range Inch Graduation Catalog No. EDP No. No. 234 Standards Furnished LZ ,13,14,15,16, LZ ,19,20,21,22, LZ ,27, LZ ,33, LZ ,39, LZ ,45, LZ ,51, LZ ,57,59 Range mm mm 724MLZ , 325, 350, 375, 400, 425mm mm 724MLZ , 475, 500, 525, 550, 575mm mm 724MLZ , 675, 725mm 0.01mm mm 724MLZ , 825, 875mm mm 724MLZ , 975, 1025mm mm 724MLZ , 1125, 1175mm mm 724MLZ , 1275, 1325mm mm 724MLZ , 1425, 1475mm Adjusting wrenches furnished with each tool. 35

33 Tubular Bow Type Micrometers with fixed anvil No. 736 Series No. 736M Series mm This micrometer, available on special order, is similar to the No. 724 Series. All features are identical to the No. 724, except that it has a fixed anvil, and is furnished in one inch increments from and 25mm increments from mm. Readability Features Starrett satin chrome finish no glare resists rust Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Large thimble diameter with distinct figures Ease-of-Handling Features Balanced frame and thimble design insure easy handling and better readability Ring-type knurled lock nut for quick and sure locking Accuracy and Long-Life Features Hollow tubular frame design combining lightest possible weight with rigidity Extremely hard and stable one-piece spindle (the heart of our accuracy) Micro-lapped measuring faces Quick and easy sleeve adjustment No. 234 Standards furnished with micrometers Starrett workmanship No. 736 Tubular Bow Fixed Anvil Micrometers are available in inch and millimeter sizes from or mm by special order, priced on application. Shown above is a micrometer with standard. Ultralight C Frame Gages Rigid honeycomb aluminum diameter gage weighs five times less than solid frame gages. Unit shown has interchangeable anvils for range. The gage is used as a dial indicator snap gage set to produce nominal dimension, or as an indicating micrometer. The micrometer head with.0001 graduations and the.0005 dial indicator insure quick, accurate readings. Ultralights are available from ( mm) I.D. or O.D. and can be designed for up to 72 (1800mm) throat depth for thickness measurement. Order by catalog number and range through our Special Order Department. Example: No. 736LZ-28 (this orders a micrometer with a range with lock nut and standard, in an attractive, protective case.) 36