SAR Test Report. Attestation of Global Compliance(Shenzhen) Co., Ltd.

Transcription

1 Page 1 of 285 SAR Test Report Report No.: AGC EH01 PRODUCT DESIGNATION : GSM /WCDMA/FDD-LTE Mobile Phone BRAND NAME : CUBOT MODEL NAME : S550 CLIENT : Shenzhen Huafurui Technology Co., Ltd. DATE OF ISSUE : Dec. 17,2015 STANDARD(S) : EN 50360:2001+A1:2012; EN : 2006; IEC : 2005; IEC :2010; EN :2010; EN 50566:2013 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.

2 Page 2 of 285 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 17,2015 Valid Original Report

3 Page 3 of 285 Applicant Name Applicant Address Manufacturer Name Manufacturer Address Product Designation Brand Name Model Name Different Description Test Report Certification Shenzhen Huafurui Technology Co., Ltd. Room 07B, Tower A, Modern Window Building, Huaqiang North Road, Futian District, Shenzhen, P.R. China Shenzhen Huafurui Technology Co., Ltd. Room 07B, Tower A, Modern Window Building, Huaqiang North Road, Futian District, Shenzhen, P.R. China GSM /WCDMA/FDD-LTE Mobile Phone CUBOT S550 N/A EUT Voltage Applicable Standard DC3.8V by battery Test Date Nov. 27,2015 to Dec. 14,2015 Performed Location EN 50360:2001+A1:2012; EN : 2006; IEC : 2005; IEC :2010; EN :2010; EN 50566:2013 Attestation of Global Compliance(Shenzhen) Co., Ltd. 2 F, Building 2, No.1-No.4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang Street, Bao'an District, Shenzhen, China Report Template AGCRT-EC-4G/SAR ( ) Tested By Thea Huang(Huang Qianqian) Dec. 17,2015 Checked By Angela Li(Li Jiao) Dec. 17,2015 Authorized By Solger Zhang(Zhang Hongyi) Authorized Officer Dec. 17,2015

4 Page 4 of 285 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE GENERAL INFORMATION EUT DESCRIPTION SAR MEASUREMENT SYSTEM THE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS COMOSAR E-FIELD PROBE ROBOT VIDEO POSITIONING SYSTEM DEVICE HOLDER SAM TWIN PHANTOM SAR MEASUREMENT PROCEDURE SPECIFIC ABSORPTION RATE (SAR) SAR MEASUREMENT PROCEDURE TISSUE SIMULATING LIQUID THE COMPOSITION OF THE TISSUE SIMULATING LIQUID TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS TISSUE CALIBRATION RESULT SAR SYSTEM CHECK PROCEDURE SAR SYSTEM CHECK PROCEDURES SAR SYSTEM CHECK EUT TEST POSITION DEFINE TWO IMAGINARY LINES ON THE HANDSET CHEEK POSITION TITLE POSITION BODY WORN POSITION SAR EXPOSURE LIMITS TEST EQUIPMENT LIST MEASUREMENT UNCERTAINTY CONDUCTED POWER MEASUREMENT TEST RESULTS SAR TEST RESULTS SUMMARY APPENDIX A. SAR SYSTEM CHECK DATA APPENDIX B. SAR MEASUREMENT DATA APPENDIX C. TEST SETUP PHOTOGRAPHS &EUT PHOTOGRAPHS APPENDIX D. CALIBRATION DATA

5 1. SUMMARY OF MAXIMUM SAR VALUE Report No.: AGC EH01 Page 5 of 285 The maximum results of Specific Absorption Rate (SAR) found during testing for EUT are as follows: Frequency Band Highest Reported 10g-SAR(W/Kg) Head Body-worn(with 15mm separation) GSM DCS WCDMA Band WCDMA Band LTE Band LTE Band LTE Band LTE Band This device is compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (2.0W/Kg).

6 Page 6 of GENERAL INFORMATION 2.1. EUT Description General Information Product Designation Test Model Hardware Version Software Version Device Category RF Exposure Environment GSM /WCDMA/FDD-LTE Mobile Phone S550 HCT-T823MB-A2 N/A Portable Uncontrolled Antenna Type Internal GSM and GPRS&EGPRS Support Band GSM 850 GSM 900 DCS 1800 PCS 1900 GPRS & EGPRS Type GPRS & EGPRS Class TX Frequency Range RX Frequency Range Release Version Type of modulation Antenna Gain Max. Average Power (Max. Peak Power) WCDMA Support Band HS Type TX Frequency Range RX Frequency Range Release Version Type of modulation Antenna Gain Max. Average Power (Max. Peak Power) Class B Class 12(1Tx+4Rx, 2Tx+3Rx, 3Tx+2Rx, 4Tx+1Rx) GSM900: MHz ; DCS1800: MHz GSM900: MHz ; DCS1800: MHz R99 GMSK for GSM/GPRS; GMSK & 8-PSK for EGPRS 1.0dBi GSM900: 31.77dBm (32.50dBm); DCS1800: 28.68dBm (29.04dBm) UMTS FDD Band 1 UMTS FDD Band 8 UMTS FDD Band 2 UMTS FDD Band 5 HSPA(HSUPA/HSDPA) WCDMA FDD Band 1: MHz ;WCDMA FDD Band 8: MHz WCDMA FDD Band 1: MHz ;WCDMA FDD Band 8: MHz Rel-6 HSDPA:QPSK/16QAM; HSUPA:BPSK; WCDMA:QPSK 1.0dBi Band 1: 23.57dBm (23.87dBm) Band 8: 23.61dBm (23.79dBm)

7 Page 7 of 285 EUT Description( Continue) Bluetooth Bluetooth Version V2.0 V2.1 V2.1+EDR V3.0 V3.0+HS V4.0 Operation Frequency 2402~2480MHz Type of modulation GFSK /4-DQPSK 8-DPSK EIRP Antenna Gain 0.30dBm -3.8dBi LTE Support Band Band 1 Band 3 Band 7 Band 20 TX Frequency Range RX Frequency Range Release Version Band 1: MHz; Band 3: MHz; Band 7: MHz; Band 20: MHz Band 1: MHz; Band 3: MHz; Band 7: MHz; Band 20: MHz Rel-8 Type of modulation QPSK,16QAM Antenna Gain -4.2dBi(Band 1); -3.8dBi(Band 3); -5.5 dbi(band 7);-6.5dBi(Band 20); Diverstity Antenna Gain -4.3dBi(Band 1); -3.6 dbi(band 3); -5.2dBi(Band 7);-6.3dBi(Band 20); Max. Average Power Band 1: 22.61dBm, Band 3: 22.82dBm, Band 7:22.70dBm; Band 20:22.69dBm; WIFI WIFI Specification a b g n(20) n(40) Operation Frequency EIRP Antenna Gain 2412~2472MHz 11b:9.86dBm,11g:6.98dBm,11n(20):7.29dBm,11n(40):6.20dBm -3.8dBi Li-ion Battery Brand Name Model Name Capacitance Rated Voltage CUBOT S mAh DC3.8V Charging Voltage DC4.35V Note: 1.The sample used for testing is end product. 2.Diverstity antenna just for receive.

8 Page 8 of SAR MEASUREMENT SYSTEM 3.1. The SATIMO system used for performing compliance tests consists of following items The COMOSAR system for performing compliance tests consists of the following items: The PC. It controls most of the bench devices and stores measurement data.a computer running WinXP and the Opensar software. The E-Field probe. The probe is a 3-axis system made of 3 distinct dipoles. Each dipole returns a voltage in function of the ambient electric field. The Keithley multimeter measures each probe dipole voltages. The SAM phantom simulates a human head. The measurement of the electric field is made inside the phantom. The liquids simulate the dielectric properties of the human head tissues. The network emulator controls the mobile phone under test. The validation dipoles are used to measure a reference SAR. They are used to periodically check the bench to make sure that there is no drift of the system characteristics over time. The phantom, the device holder and other accessories according to the targeted measurement.

9 Page 9 of COMOSAR E-Field Probe The SAR measurement is conducted with the dosimetric probe manufactured by SATIMO. The probe is specially designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at different frequency. SATIMO conducts the probe calibration in compliance with international and national standards (e.g. IEEE 1528, EN62209, IEC 62209, etc.)under ISO17025.The calibration data are in Appendix D. Isotropic E-Field Probe Specification Model Manufacture Identification No. Frequency Dynamic Range Dimensions SSE5 MVG SN 19/15 EP GHz-3GHz Linearity:±0.12dB(300MHz-3GHz) 0.01W/Kg-100W/Kg Linearity:±0.12dB Overall length:330mm Length of individual dipoles:4.5mm Maximum external diameter:8mm Probe Tip external diameter:5mm Distance between dipoles/ probe extremity:2.7mm Application High precision dosimetric measurements in any exposure scenario (e.g., very strong gradient fields). Only probe which enables compliance testing for frequencies up to 3 GHz with precision of better 30% Robot The COMOSAR system uses the KUKA robot from SATIMO SA (France).For the 6-axis controller COMOSAR system, the KUKA robot controller version from SATIMO is used. The XL robot series have many features that are important for our application: High precision (repeatability 0.02 mm) High reliability (industrial design) Jerk-free straight movements Low ELF interference (the closed metallic construction shields against motor control fields) 6-axis controller

10 Page 10 of Video Positioning System The video positioning system is used in OpenSAR to check the probe. Which is composed of a camera, LED, mirror and mechanical parts.the camera is piloted by the main computer with firewire link. During the process, the actual position of the probe tip with respect to the robot arm is measured, as well as the probe length and the horizontal probe offset. The software then corrects all movements, such that the robot coordinates are valid for the probe tip. The repeatability of this process is better than 0.1 mm. If a position has been taught with an aligned probe, the same position will be reached with another aligned probe within 0.1 mm, even if the other probe has different dimensions. During probe rotations, the probe tip will keep its actual position Device Holder The COMOSAR device holder is designed to cope with different positions given in the standard. It has two scales for the device rotation (with respect to the body axis) and the device inclination (with respect to the line between the ear reference points). The rotation center for both scales is the ear reference point (EPR). Thus the device needs no repositioning when changing the angles. The COMOSAR device holder has been made out of low-loss POM material having the following dielectric parameters: relative permittivity εr =3 and loss tangent δ = The amount of dielectric material has been reduced in the closest vicinity of the device, since measurements have suggested that the influence of the clamp on the test results could thus be lowered.

11 Page 11 of SAM Twin Phantom The SAM twin phantom is a fiberglass shell phantom with 2mm shell thickness (except the ear region where shell thickness increases to 6mm). It has three measurement areas: Left head Right head Flat phantom The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are provided to identify the phantom position with respect to the robot.

12 Page 12 of SAR MEASUREMENT PROCEDURE 4.1. Specific Absorption Rate (SAR) SAR is related to the rate at which energy is absorbed per unit mass in object exposed to a radio field. The SAR distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical modeling. The standard recommends limits for two tiers of groups, occupational/controlled and occupational/uncontrolled, based on a person s awareness and ability to exercise control over his or her exposure. In general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled. The SAR definition is the time derivative (rate) of the incremental energy (dw) absorbed by (dissipated in) an incremental mass (dm) contained in a volume element(dv) of given mass density (ρ). The equation description is as below: SAR is expressed in units of Watts per kilogram (W/Kg) SAR can be obtained using either of the following equations: Where SAR E ζ ρ c h is the specific absorption rate in watts per kilogram; is the r.m.s. value of the electric field strength in the tissue in volts per meter; is the conductivity of the tissue in siemens per metre; is the density of the tissue in kilograms per cubic metre; is the heat capacity of the tissue in joules per kilogram and Kelvin; dt dt t = 0 is the initial time derivative of temperature in the tissue in kelvins per second

13 Page 13 of SAR Measurement Procedure Step 1: Power Reference Measurement The Power Reference Measurement and Power Drift Measurement are for monitoring the power drift of the device under test in the batch process. The minimum distance of probe sensors to surface is 2.7mm This distance cannot be smaller than the distance os sensor calibration points to probe tip as `defined in the probe properties, Step 2: Area Scan The Area Scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine measurement around the hot spot. The sophisticated interpolation routines implemented in SATIMO software can find the maximum locations even in relatively coarse grids. When an Area Scan has measured all reachable points, it computes the field maximal found in the scanned area, within a range of the global maximum. The range (in db) is specified in the standards for compliance testing. For example, a 2db range is required in IEEE Standard 1528 and IEC62209 standards, whereby 3db is a requirement when compliance is assessed in accordance with the ARIB standard (Japan) If one Zoom Scan follows the Area Scan, then only the absolute maximum will be taken as reference. For cases where multiple maximum are detected, the number of Zoom Scan has to be increased accordingly. measure the SAR distribution within the phantom (area scan procedure). The SAR distribution is scanned along the inside surface of one side of the phantom head, at least for an area larger than the projection of the handset and antenna. The spatial grid step shall be less than 20 mm. The resolution accuracy can also be tested using the reference functions of If surface scanning is used, then the distance between the geometrical centre of the probe dipoles and the inner surface of the phantom shall be 8,0 mm or less (±1,0 mm). At all measurement points, the angle of the probe with respect to the line normal to the surface is recommended but not required to be less than 30. Step 3: Zoom Scan Zoom Scan are used to assess the peak spatial SAR value within a cubic average volume containing 1g abd 10g of simulated tissue. The Zoom Scan measures points(refer to table below) within a cube whose base faces are centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done, the Zoom Scan evaluates the averaged SAR for 1g and 10g and displays these values next to the job s label. measure SAR with a grid step of 8 mm or less in a volume with a minimum size of 30 mm by 30 mm and 30 mm in depth (zoom scan procedure). The grid step in the vertical direction shall be 5 mm or less (see C.3.3). Separate grids shall be centred on each of the local SAR maxima found in step c). Step 4: Power Drift Measurement The Power Drift Measurement measures the field at the same location as the most recent power reference measurement within the same procedure, and with the same settings. The Power Drift Measurement gives the field difference in db from the reading conducted within the same settings. This allows a user to monitor the power drift of the device under test within a batch process. The measurement procedure is the same as Step 1.

14 Page 14 of TISSUE SIMULATING LIQUID For SAR measurement of the field distribution inside the phantom, the phantom must be filled with homogeneous tissue simulating liquid to a depth of at least 15cm. For head SAR testing the liquid height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15cm For body SAR testing, the liquid height from the center of the flat phantom to the liquid top surface is larger than 15cm.The nominal dielectric values of the tissue simulating liquids in the phantom and the tolerance of 5% are listed in The composition of the tissue simulating liquid Ingredient Water Salt Sugar HEC Preventol DGBE 1,2-Propanediol Triton X MHz MHz MHz MHz MHz Tissue Dielectric Parameters for Head and Body Phantoms The head tissue dielectric parameters recommended by the EN have been incorporated in the following table.the body tissue dielectric parameters recommended by the EN have been incorporated in the following table. Target Frequency head body (MHz) εr σ (S/m) εr σ (S/m) (εr = relative permittivity, ζ = conductivity and ρ = 1000 kg/m3)

15 Page 15 of Tissue Calibration Result The dielectric parameters of the liquids were verified prior to the SAR evaluation using SATIMO Dielectric Probe Kit and R&S Network Analyzer ZVL6. Frequency Target Value Measurement Value Tissue Temp (MHz) εr δ[s/m] εr δ[s/m] [ o C] Test Date Dec. 10, Dec. 03, Dec. 01, Nov. 27, Dec. 09, Dec. 12, Dec. 14,2015

16 Page 16 of SAR SYSTEM CHECK PROCEDURE 6.1. SAR System Check Procedures SAR system check is required to confirm measurement accuracy, according to the tissue dielectric media, probe calibration points and other system operating parameters required for measuring the SAR of a test device. The system verification must be performed for each frequency band and within the valid range of each probe calibration point required for testing the device. The same SAR probe(s) and tissue-equivalent media combinations used with each specific SAR system for system verification must be used for device testing. When multiple probe calibration points are required to cover substantially large transmission bands, independent system verifications are required for each probe calibration point. A system verification must be performed before each series of SAR measurements using the same probe calibration point and tissue-equivalent medium. Additional system verification should be considered according to the conditions of the tissue-equivalent medium and measured tissue dielectric parameters, typically every three to four days when the liquid parameters are remeasured or sooner when marginal liquid parameters are used at the beginning of a series of measurements. Each SATIMO system is equipped with one or more system check kits. These units, together with the predefined measurement procedures within the SATIMO software, enable the user to conduct the system check and system validation. System kit includes a dipole, and dipole device holder. The system check verifies that the system operates within its specifications. It s performed daily or before every SAR measurement. The system check uses normal SAR measurement in the flat section of the phantom with a matched dipole at a specified distance. The system check setup is shown as below.

17 Page 17 of SAR System Check Dipoles The dipoles used is based on the EN /2 standard, the table below provides details for the mechanical and electrical Specifications for the dipoles. Frequency L (mm) h (mm) d (mm) 835/900 MHz MHz MHz MHz System Check Result System Performance Check at 835/ 900 MHz &1800MHz & 2000MHz & 2600MHz for Head Validation Kit:S SN 46/11DIP 0G & SN 46/11DIP 1G & SN 46/11DIP 2G & SN 47/14 DIP 2G Target Value(W/Kg) Reference Result (± 10%) Normalized to 1W(W/Kg) Tissue Temp. Test time 1g 10g 1g 10g 1g 10g [ C] Dec. 10, Dec. 03, Dec. 01, Nov. 27, Dec. 09, Dec. 12, Dec. 14,2015 Frequency [MHz]

18 7. EUT TEST POSITION Report No.: AGC EH01 Page 18 of 285 This EUT was tested in Right Cheek, Right Titled, Left Cheek, Left Titled, Body back and Body front Define Two Imaginary Lines on the Handset (1)The vertical centerline passes through two points on the front side of the handset the midpoint of the width wt of the handset at the level of the acoustic output, and the midpoint of the width wb of the handset. (2)The horizontal line is perpendicular to the vertical centerline and passes through the center of the acoustic output. The horizontal line is also tangential to the face of the handset at point A. (3)The two lines intersect at point A. Note that for many handsets, point A coincides with the center of the acoustic output; however, the acoustic output may be located elsewhere on the horizontal line. Also note that the vertical centerline is not necessarily to the front face of the handset, especially for clamshell handsets, handsets with flip covers, and other irregularly shaped handsets.

19 Page 19 of Cheek Position (1) To position the device with the vertical center line of the body of the device and the horizontal line crossing the center picec in a plane parallel to the sagittal plane of the phantom. While maintaining the device in this plane, align the vertical center line with the reference plane containing the ear and mouth reference point (M: Mouth, RE: Right Ear, and LE: Left Ear) and align the center of the ear piece with the line RE-LE. (2) To move the device towards the phantom with the ear piece aligned with the the line LE-RE until the phone touched the ear. While maintaining the device in the reference plane and maintaining the phone contact with ear, move the bottom of the phone until any point on the front side is in contact with the cheek of the phantom or until contact with the ear is lost 7.3. Title Position (1) To position the device in the cheek position described above. (2) While maintaining the device in the reference plane described above and pivoting against the ear, moves it outward away from the mouth by an angle of 15 degrees or until with the ear is lost.

20 Page 20 of Body Worn Position (1) To position the EUT parallel to the phantom surface. (2) To adjust the EUT parallel to the flat phantom. (3) To adjust the distance between the EUT surface and the flat phantom to 15mm.

21 8. SAR EXPOSURE LIMITS Report No.: AGC EH01 Page 21 of 285 SAR assessments have been made in line with the requirements of 1999/519/EC of 12 July 1999 on the limitation of exposure of the general public electromagnetic fields (0 Hz-300GHz). Limits for General Population/Uncontrolled Exposure (W/kg) Type Exposure Uncontrolled Environment Limit (W/kg) Spatial Peak SAR (10 g cube tissue for brain or body) 2.00 Spatial Average SAR (Whole body) 0.08 Spatial Peak SAR (Limbs) 4.00

22 9. TEST EQUIPMENT LIST Report No.: AGC EH01 Page 22 of 285 Equipment Manufacturer/ Current calibration Next calibration Identification No. description Model date date SAR Probe MVG SN 19/15 EP254 07/10/ /09/2016 TISSUE Probe SATIMO SN 45/11 OCPG45 12/02/ /01/2016 Phantom SATIMO SN_4511_SAM90 Validated. No cal Validated. No cal required. required. Liquid SATIMO - Validated. No cal Validated. No cal required. required. Comm Tester R&S - CMU Y /06/ /05/2016 Comm Tester R&S- CMW500 S/N /19/ /18/2016 Comm Tester Agilent-8960 GB /06/ /05/2016 Multimeter Keithley /06/ /05/2016 Dipole SATIMO SID900 SN46/11 DIP 0G /14/ /13/2016 Dipole SATIMO SID1800 SN46/11 DIP 1G /14/ /13/2016 Dipole SATIMO SID2000 SN46/11 DIP 2G /14/ /13/2016 Dipole SATIMO SID2600 SN47/14 DIP 2G /03/ /02/2017 Signal Generator Agilent-E4438C MY /06/ /05/2016 Spectrum Analyzer E4440 Agilent US /23/ /22/2016 Network Analyzer Rhode & Schwarz ZVL6 SN /06/ /05/2016 Attenuator Warison /WATT-6SR1211 N/A N/A N/A Attenuator Mini-circuits / VAT-10+ N/A N/A N/A Amplifier EM30180 SN /06/ /05/2016 Directional Werlatone/ Couple C SN /29/ /28/2016 Directional Werlatone/ Couple C SN /29/ /28/2016 Power Sensor NRP-Z /20/ /19/2016 Power Sensor NRP-Z23 US /06/ /05/2016 Power Viewer R&S V N/A N/A Note: Per EN /2 Dipole SAR Validation, AGC Lab has adopted 3 years calibration intervals. On annual basis, every measurement dipole has been evaluated and is in compliance with the following criteria: 1. There is no physical damage on the dipole; 2. System validation with specific dipole is within 10% of calibrated value; 3. Return-loss is within 20% of calibrated measurement; 4. Impedance is within 5Ω of calibrated measurement.

23 10. MEASUREMENT UNCERTAINTY SATIMO Uncertainty Report No.: AGC EH01 Page 23 of 285 Measurement uncertainty for 300 MHz to 3 GHz averaged over 1 gram / 10 gram. Uncertainty Component Sec. Tol Prob. Div. Ci (1g) Ci (10g) 1g Ui 10g Ui Vi (+- %) Dist. (+-%) (+-%) Measurement System Probe calibration E N Axial Isotropy E R Hemispherical Isotropy E R Boundary effect E R Linearity E R System detection limits E R Readout Electronics E N Response Time E R Integration Time E R RF ambient Conditions E R Probe positioner Mechanical Tolerance Probe positioning with respect to Phantom Shell Extrapolation, interpolation and integration Algoritms for Max. SAR Evaluation E R E R E R Test sample Related Test sample positioning E N N-1 Device Holder Uncertainty E N Output power Variation - SAR drift measurement R Phantom and Tissue Parameters Phantom Uncertainty (Shape and thickness tolerances) E R Liquid conductivity deviation from target value Liquid conductivity - measurement uncertainty Liquid permittivity - deviation from target value Liquid permittivity - measurement uncertainty Combined Standard Uncertainty Expanded Uncertainty (95% Confidence interval) E R E N E R E N M RSS k

24 SATIMO Uncertainty Report No.: AGC EH01 Page 24 of 285 System uncertainty for 300 MHz to 3 GHz averaged over 1 gram / 10 gram. Uncertainty Component Sec. Tol Prob. 1g Ui Div. Ci (1g) Ci (10g) (+- %) Dist. (+-%) Measurement System 10g Ui (+-%) Probe calibration E N Axial Isotropy E R Hemispherical Isotropy E R Boundary Effects E R Linearity E R System detection limits E R Readout Electronics E N Response Time E R Integration Time E R RF ambient Conditions E R Vi Probe positioner Mechanical Tolerance E R Probe positioning with respect to Phantom Shell E R Extrapolation, interpolation and integration Algoritms for E R Max. SAR Evaluation Dipole Dipole axis to liquid Distance 8,E N N-1 Input power and SAR drift measurement 8, R Phantom and Tissue Parameters Phantom Uncertainty (Shape and thickness tolerances) E R Liquid conductivity - deviation from target value E R Liquid conductivity - measurement uncertainty E N Liquid permittivity - deviation from target value E R Liquid permittivity - measurement uncertainty E N M Combined Standard Uncertainty RSS Expanded Uncertainty (95% Confidence interval) k

25 11. CONDUCTED POWER MEASUREMENT Mode Maximum Power <1> GSM 900 GPRS 900 (1 Slot) GPRS 900 (2 Slot) GPRS 900 (3 Slot) GPRS 900 (4 Slot) EGPRS 900 (1 Slot) EGPRS 900 (2 Slot) EGPRS 900 (3 Slot) EGPRS 900 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Report No.: AGC EH01 Page 25 of 285 Duty cycle Factor(dBm) Frame Power(dBm)

26 Page 26 of 285 Mode Maximum Power <2> GSM 900 GPRS 900 (1 Slot) GPRS 900 (2 Slot) GPRS 900 (3 Slot) GPRS 900 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Duty cycle Factor(dBm) Frame Power(dBm)

27 Page 27 of 285 Mode Maximum Power <1> DCS1800 GPRS1800 (1 Slot) GPRS1800 (2 Slot) GPRS1800 (3 Slot) GPRS1800 (4 Slot) EGPRS1800 (1 Slot) EGPRS1800 (2 Slot) EGPRS1800 (3 Slot) EGPRS1800 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Duty cycle Factor(dBm) Frame Power(dBm)

28 Page 28 of 285 Mode Maximum Power <2> DCS1800 GPRS1800 (1 Slot) GPRS1800 (2 Slot) GPRS1800 (3 Slot) GPRS1800 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Duty cycle Factor(dBm) Frame Power(dBm) Note 1: The Frame Power (Source-based time-averaged Power) is scaled the maximum burst average power based on time slots. The calculated methods are show as following: Frame Power = Max burst power (1 Up Slot) 9 db Frame Power = Max burst power (2 Up Slot) 6 db Frame Power = Max burst power (3 Up Slot) 4.26 db Frame Power = Max burst power (4 Up Slot) 3 db Note 2: SAR is not required for GPRS (1 Slot) Mode because its output power is less than Voice Mode

29 Page 29 of 285 UMTS BAND I Mode Frequency(MHz) Avg. Burst Power (dbm) WCDMA 2100 RMC HSDPA Subtest 1 HSDPA Subtest 2 HSDPA Subtest 3 HSDPA Subtest 4 HSUPA Subtest 1 HSUPA Subtest 2 HSUPA Subtest 3 HSUPA Subtest 4 HSUPA Subtest

30 Page 30 of 285 UMTS BAND 8 Mode Frequency (MHz) Avg. Burst Power (dbm) WCDMA 900 RMC HSDPA Subtest 1 HSDPA Subtest 2 HSDPA Subtest 3 HSDPA Subtest 4 HSUPA Subtest 1 HSUPA Subtest 2 HSUPA Subtest 3 HSUPA Subtest 4 HSUPA Subtest

31 Page 31 of 285 According to 3GPP sub-clause 6.2.2, the maximum output power is allowed to be reduced by following the table. Table 6.1Aa: UE maximum output power with HS-DPCCH and E-DCH UE Transmit Channel Configuration CM(db) MPR(db) For all combinations of,dpdch,dpcch HS-DPDCH,E-DPDCH and E-DPCCH 0 CM 3.5 MAX(CM-1,0) Note: CM=1 for c / d =12/15, hs / c =24/15.For all other combinations of DPDCH, DPCCH, HS-DPCCH, E-DPDCH and E-DPCCH the MPR is based on the relative CM difference. The device supports MPR to solve linearity issues (ACLR or SEM) due to the higher peak-to average ratios (PAR) of the HSUPA signal. This prevents saturating the full range of the TX DAC inside of device and provides a reduced power output to the RF transceiver chip according to the Cubic Metric (a function of the combinations of DPDCH, DPCCH, HS-DPCCH, E-DPDCH and E-DPCCH). When E-DPDCH channels are present the beta gains on those channels are reduced firsts to try to get the power under the allowed limit. If the beta gains are lowered as far as possible, then a hard limiting is applied at the maximum allowed level. The SW currently recalculates the cubic metric every time the beta gains on the E-DPDCH are reduced. The cubic metric will likely get lower each time this is done.however, there is no reported reduction of maximum output power in the HSUPA mode since the device also provides a compensation for the power back-off by increasing the gain of TX_AGC in the transceiver (PA) device. The end effect is that the DUT output power is identical to the case where there is no MPR in the device.

32 Page 32 of 285 LTE BAND Bandwidth Modulation RB size 5MHz QPSK 16QAM 1 12 Conducted Power of LTE Band 1(dBm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 10MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

33 Page 33 of 285 Bandwidth Modulation RB size 15MHz QPSK 16QAM 1 37 Conducted Power of LTE Band 1(dBm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 20MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

34 Page 34 of 285 Bandwidth Modulation RB size 1.4MHz QPSK 16QAM Bandwidth Modulation RB size 3MHz QPSK 16QAM 1 3 Conducted Power of LTE Band 3 (dbm) RB offset Target MPR Channel Channel Channel RB offset Target MPR Channel Channel Channel

35 Page 35 of 285 Bandwidth Modulation RB size 5MHz QPSK 16QAM 1 12 Conducted Power of LTE Band 3(dBm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 10MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

36 Page 36 of 285 Bandwidth Modulation RB size 15MHz QPSK 16QAM 1 37 Conducted Power of LTE Band 3 (dbm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 20MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

37 Page 37 of 285 Bandwidth Modulation RB size 5MHz QPSK 16QAM 1 12 Conducted Power of LTE Band 7 (dbm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 10MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

38 Page 38 of 285 Bandwidth Modulation RB size 15MHz QPSK 16QAM 1 37 Conducted Power of LTE Band 7 (dbm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 20MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

39 Page 39 of 285 Bandwidth Modulation RB size 5MHz QPSK 16QAM 1 12 Conducted Power of LTE Band 20(dBm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 10MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

40 Page 40 of 285 Bandwidth Modulation RB size 15MHz QPSK 16QAM 1 37 Conducted Power of LTE Band 20(dBm) RB offset Target MPR Channel Channel Channel Bandwidth Modulation RB size 20MHz QPSK 16QAM RB offset Target MPR Channel Channel Channel

41 Page 41 of 285 The following tests were conducted according to the test requirements outlined in section 6.2 of the 3GPP TS specification. UE Power Class: 3 (23 +/- 2dBm). The allowed Maximum Power Reduction (MPR) for the maximum output power due to higher order modulation and transmit bandwidth configuration (resource blocks) is specified in Table of the 3GPP TS Table Maximum Power Reduction (MPR) for Power class3 Modulation Maximum Power Reduction (MPR) for Power[RB] 1.4MHz 3.0MHz 5MHz 10MHz 15MHz 20MHz MPR(dB) QPSK >5 >4 >8 >12 >16 > QAM QAM >5 >4 >8 >12 >16 >18 2 The allowed A-MPR values specified below in Table of 3GPP TS are in addition to the allowed MPR requirements. All the measurements below were performed with A-MPR disabled, by using Network Signaling Value of NS_01.3

42 Page 42 of 285 Table : Additional Maximum Power Reduction (A-MPR) / Spectrum Emission requirements Network Channel Resources Requirements Signaling E-UTRA Band bandwidth Blocks (sub-clause) value (MHz) (N RB ) A-MPR (db) NS_ Table ,3,5,10,15,20 Table N/A 3 >5 1 NS_ >6 1 2,4,10, 23, 10 >6 1 25,35,36 15 > >10 1 NS_ >6 1 10, 15, 20 Table NS_ ,15, NS_ , 13, 14, , 3, 5, 10 Table N/A NS_ Table Table NS_ , 15 > 44 3 NS_ , 15 > 40 1 > 55 2 NS_ , 20 Table Table NS_ , 3, 5, ,15,20 Table Table NS_ , 3, 5 Table Table NS_ Table Table NS_ , 15 Table Table NS_ , 3, 5, 10, 15 Table Table , Table Table NS_ , 5, 10 Table , Table , Table , 10 Table N/A NS_ NS_18 10, 15, NS_19 10, 15, 20 Table Table NS_20 5, 10, 15, 20 Table Table NS_

43 Page 43 of TEST RESULTS SAR Test Results Summary Test position and configuration Head SAR was performed with the device configured in the positions according to IEEE1528,IEC/EN , and Body SAR was performed with the device 15mm from the phantom according to IEC/EN Operation Mode 1 For GSM900, the power control is set to Maximum Power Class. For GPRS 900(GMSK, CS1), the power control level is set to Maximum Power Class. For E-GPRS 900(GMSK: MCS1, 8PSK:MCS5), the power control is set to Maximum Power Class. For DCS 1800, the power control is set to Maximum Power Class. For GPRS 1800(GMSK, CS1), the power control level is set to Maximum Power Class. For E-GPRS 1800 (GMSK: MCS1, 8PSK:MCS5), the power control level is set to Maximum Power Class. This is a multi-slot class 12 device capable of 4 uplink timeslots. During the head SAR test, the device was transmitting with maximum 1 uplink timeslot; during the body SAR test, it was transmitting with maximum 4 uplink timeslots. Additionally, this device doesn t support dual transfer mode (DTM) Testing with the headset was performed at the position and channels that resulted in the highest body SAR. This testing was performed with GPRS transmitting with 2/3/4 uplink timeslots. In the Body SAR test result table, body-worn means display of device down, body-front means display of device up. 2 For WCDMA, head and body SAR is tested under RMC 12.2k mode with power control set all up bits SAR for AMR is not required since its power is less than RMC. For HSDPA/HSUPA, SAR is test with its maximum power mode. 3 The following test measurement is LTE procedure: a) Largest channel bandwidth standalone SAR test requirements (a1) QPSK with 1 RB allocation Start with the largest channel bandwidth and measure SAR for QPSK with 1 RB allocation, using the RB offset and required test channel combination with the highest maximum output power for RB offsets at the upper edge, middle and lower edge of each required test channel. When the measured SAR is 1.0 W/kg, testing of the remaining RB offset configurations and required test channels is not required for 1 RB allocation; otherwise, SAR is required for the remaining required test channels and only for the RB offset configuration with the highest output power for that channel. When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for all three RB offset configurations for that required test channel. (a2) QPSK with 50% RB allocation Start with the largest channel bandwidth and measure SAR for QPSK with 50% RB allocation at the worst position for 1 RB allocation in a1) When the measured SAR is 1.0 W/kg, testing of the remaining RB offset configurations and required test channels is not required for 50% RB allocation; otherwise, SAR is required for the remaining required test channels and only for the RB offset configuration with the highest output power for that channel. When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for all three RB offset configurations for that required test channel. (a3) QPSK with 100% RB allocation Start with the largest channel bandwidth and measure SAR for QPSK with 100% RB allocation at the

44 Page 44 of 285 worst position for 1 RB&50%RB allocation in a1&a2) When the measured SAR is 1.0 W/kg, testing of the remaining channels is not required for 100% RB allocation; otherwise, SAR is required for the remaining channels and only for the highest output power for that channel. When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for low,mid,high channel. (a4) Higher order modulations For each modulation besides QPSK; e.g., 16-QAM, 64-QAM, apply the QPSK procedures in above sections to determine the QAM configurations that may need SAR measurement. For each configuration identified as required for testing, SAR is required only when the highest maximum output power for the configuration in the higher order modulation is > ½ db higher than the highest maximum output power in QPSK or when the measured SAR for the QPSK configuration is > 1.8W/kg. b) Other channel bandwidth standalone SAR test requirements For the other channel bandwidths used by the device in a frequency band, apply all the procedures required for the largest channel bandwidth in section 4.1) to determine the channels and RB configurations that need SAR testing and only measure SAR when the highest maximum output power of a configuration requiring testing in the smaller channel bandwidth is > ½ db higher than the highest maximum output power of the largest channel bandwidth configuration or the measured SAR of a configuration for the largest channel bandwidth is > 1.8 W/kg. 4 P-sensor is proximity sensor, just for avoiding the wrong operation in the phone screen when call, and is no any influence on RF power level or SAR result 5 G-Sensor is no any influence on RF power level or SAR result.

45 Page 45 of Antenna Location: ( back view) EUT Top Edge Diversity Antenna BT&WIFI Antenna EUT Right Edge EUT Left Edge GSM&WCDMA &LTE Antenna EUT Bottom Edge

46 Page 46 of SAR Test Results Summary SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 43.6 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: GSM900 with GMSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turn-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek voice Left Tilt voice Right Cheek voice Right Cheek voice Right Cheek voice Right Tilt voice Body back voice Body back GPRS-2 slots Body back GPRS-3 slots Body back GPRS-4 slots Body Front GPRS-4 slots Body back GPRS-4 slots with Ear SIM 2 Card Right Cheek voice Body back GPRS-4 slots Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 15mm. Limit W/kg

47 Page 47 of 285 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 44.8 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: DCS1800 with GMSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turn-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek voice Left Cheek voice Left Cheek voice Left Tilt voice Right Cheek voice Right Tilt voice Body back voice Body back GPRS-2 slots Body back GPRS-3 slots Body back GPRS-4 slots Body Front GPRS-4 slots Body back GPRS-4 slots with Ear SIM 2 Card Left Cheek voice Body back GPRS-4 slots Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 15mm. Limit W/kg

48 Page 48 of 285 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 50.3 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: WCDMA Band 1 with QPSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turn-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek RMC 12.2kbps Left Cheek RMC 12.2kbps Left Cheek RMC 12.2kbps Left Tilt RMC 12.2kbps Right Cheek RMC 12.2kbps Right Tilt RMC 12.2kbps Body back RMC 12.2kbps Body Front RMC 12.2kbps Body back HSPA Body back RMC 12.2kbps with Ear Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 15mm. Limit W/kg

49 Page 49 of 285 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 43.6 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: WCDMA Band 8 with QPSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turn-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek RMC 12.2kbps Left Tilt RMC 12.2kbps Right Cheek RMC 12.2kbps Right Cheek RMC 12.2kbps Right Cheek RMC 12.2kbps Right Tilt RMC 12.2kbps Body back RMC 12.2Kbps Body front RMC 12.2Kbps Body back HSPA Body back RMC 12.2Kbps with Ear When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 15mm. Limit W/kg

50 Page 50 of 285 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 50.4 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: LTE Band 1 BW MHz MOD 20 QPSK Position Test Mode UL RB Allocat ion UL RB START Ch. Freq. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turnup Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Limit (W/kg) Left Cheek Left Cheek Left Cheek Left Tilt Right Cheek Right Tilt Left Cheek Left Tilt Right Cheek Right Tilt Body back Body front Body back Ear. Body back Body front

51 Page 51 of 285 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 62.0 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: LTE Band 3 BW MHz MOD 20 QPSK Position Left Cheek Test Mode UL RB Allocat ion UL RB START Ch. Freq. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turnup Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Limit (W/kg) Left Tilt Right Cheek Right Cheek Right Cheek Right Tilt Left Cheek Left Tilt Right Cheek Right Tilt Body back Body front Body back Ear. Body back Body front

52 Page 52 of 285 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 53.2 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: LTE Band 7 BW MHz MOD 20 QPSK Position Test Mode UL RB Allocat ion UL RB START Ch. Freq. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turnup Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Limit (W/kg) Left Cheek Left Cheek Left Cheek Left Tilt Right Cheek Right Tilt Left Cheek Left Tilt Right Cheek Right Tilt Body back Body front Body back Ear. Body back Body front

53 Page 53 of 285 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 61.0 Product: GSM /WCDMA/FDD-LTE Mobile Phone Test Mode: LTE Band 20 BW MHz MOD 20 QPSK Positio n Left Cheek Test Mode UL RB Allocat ion UL RB START Ch. Freq. (MHz) Power Drift (<±5%) SAR (10g) (W/kg) Max. Turnup Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Limit (W/kg) Left Tilt Right Cheek Right Cheek Right Cheek Right Tilt Left Cheek Left Tilt Right Cheek Right Tilt Body back Body front Body front Ear. Body back Body front

54 Page 54 of 285 Simultaneous Multi-band Transmission Evaluation: According to EN :2010 section 6.3.2, when the EUT has more than one transmission mode, there need to take Simultaneous Multi-band Transmission into consideration; (1) The EUT has WWAN antenna, BT antenna, WLAN antenna; (2) BT and WIFI share one antenna, and cannot transmit simultaneously; (3) For simultaneous transmission at head and body exposure position, 2 transmitters simultaneous transmission was the worst state; (4) For each transmission mode, there must test separately, and then summation of peak spatial-averaged SAR values; (5) For secondary transmitter (i.e. lower power transmitters), we use the following measurement to evaluate if their power levels fall below a threshold level(annex k): P available =P th,m (SAR lim -SAR 1 )/ SAR lim Where P th, m is the threshold exclusion power level; P available is the threshold value there need to be tested; SAR lim is the SAR limit; SAR 1 is the maximum SAR value of first transimitter mode result; Alternatively, P th,m can be replaced by P max, m, which is an easier approach but leads to more restrictive power threshold; P available =P th,m (SAR lim -SAR 1 )/ SAR lim =20mW (2W/Kg W/Kg)/ 2W/Kg =14.94mW>1.07mW(0.30dBm) for BT =14.94mW>9.68mW(9.86dBm) for WIFI There is no need to test BT and WIFI; and there is no need to evaluate simultaneous transmission.

55 Page 55 of 285 APPENDIX A. SAR SYSTEM CHECK DATA Test Laboratory: AGC Lab Date: Dec. 10,2015 System Check Head 835 MHz DUT: Dipole 900 MHz Type: SID 900 Communication System: CW; Communication System Band: D835 (835.0 MHz); Duty Cycle: 1:1; Conv.F=6.36 Frequency: 835 MHz; Medium parameters used: f = 835 MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/System Check 835 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 835 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=0.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

56 Page 56 of 285 Z (mm) SAR (W/Kg) 3D screen shot Hot spot position

57 Page 57 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 System Check Head 900 MHz DUT: Dipole 900 MHz Type: SID 900 Communication System: CW; Communication System Band: D900 (900.0 MHz); Duty Cycle: 1:1; Conv.F=5.79 Frequency: 900 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/System Check 900 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 900 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=0.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

58 Page 58 of 285 Z (mm) SAR (W/Kg) 3D screen shot Hot spot position

59 Page 59 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 System Check Head 1800MHz DUT: Dipole 1800 MHz; Type: SID 1800 Communication System: CW; Communication System Band: D1800 ( MHz); Duty Cycle: 1:1; Conv.F=4.77 Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/System Check 1800 Head/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/System Check 1800 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=-1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

60 Page 60 of 285 Z (mm) SAR (W/Kg) 3D screen shot Hot spot position

61 Page 61 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 System Check Head 2000MHz DUT: Dipole 2000 MHz; Type: SID 2000 Communication System: CW; Communication System Band: D2000 ( MHz); Duty Cycle: 1:1; Conv.F=4.97 Frequency: 2000MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78; ρ= 1000 kg/m³; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/System Check 2000 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2000 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=-1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

62 Page 62 of 285 Z (mm) SAR (W/Kg) 3D screen shot Hot spot position

63 Page 63 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 System Check Head 1800MHz DUT: Dipole 1800 MHz; Type: SID 1800 Communication System: CW; Communication System Band: D1800 ( MHz); Duty Cycle: 1:1; Conv.F=4.77 Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/System Check 1800 Head/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/System Check 1800 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=0.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

64 Page 64 of 285 Z (mm) SAR (W/Kg) 3D screen shot Hot spot position

65 Page 65 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 System Check Head 2000MHz DUT: Dipole 2000 MHz; Type: SID 2000 Communication System: CW; Communication System Band: D2000 ( MHz); Duty Cycle: 1:1; Conv.F=4.97 Frequency: 2000MHz; Medium parameters used: f = 2000 MHz; ζ=1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 21.1, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/System Check 2000 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2000 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=-1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

66 Page 66 of 285 Z (mm) SAR (W/Kg) 3D screen shot Hot spot position

67 Page 67 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 System Check Head 2600MHz DUT: Dipole 2600 MHz; Type: SID 2600 Communication System: CW; Communication System Band: D2600 ( MHz); Duty Cycle: 1:1; Conv.F=4.62 Frequency:2600 MHz; Medium parameters used: f = 2600 MHz; ζ=1.93mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/System Check 2600 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2600 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=-1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

68 Page 68 of 285 Z (mm) SAR (W/Kg) 3D screen shot Hot spot position

69 Page 69 of 285 APPENDIX B. SAR MEASUREMENT DATA Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM 900 Mid-Touch-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band GSM 900 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-71.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

70 Page 70 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

71 Page 71 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM 900 Mid -Tilt-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm,dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band GSM 900 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-26.00, Y=6.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

72 Page 72 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

73 Page 73 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM 900 Low-Touch-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 Low- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Low- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band GSM 900 Channels Low Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-55.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

74 Page 74 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

75 Page 75 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM 900 Mid- Touch-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 Mid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band GSM 900 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

76 Page 76 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

77 Page 77 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM 900 High-Touch-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.79 Frequency:914.8 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 High- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 High- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band GSM 900 Channels High Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

78 Page 78 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

79 Page 79 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM 900 Mid-Tilt-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band GSM 900 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-40.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

80 Page 80 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

81 Page 81 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM 900 Low-Touch-Right <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 Low- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Low- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band GSM 900 Channels Low Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-57.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

82 Page 82 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

83 Page 83 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GSM900 Mid-Body-Worn- Back (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: GSM900; Duty Cycle: 1:8; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GSM 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band GSM 900 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

84 Page 84 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

85 Page 85 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GPRS 900 Mid-Body- Worn- Back (2up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-2 Slot; Communication System Band: GSM 900;Duty Cycle:1:4.2 ; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band GSM 900 Channels Middle Signal TDMA (Crest factor: 4.0) SURFACE SAR VOLUME SAR Maximum location: X=-7.00, Y=1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

86 Page 86 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

87 Page 87 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GPRS 900 Mid-Body- Worn- Back (3up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-3 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.7 ; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 900 Mid-Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid-Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band GSM 900 Channels Middle Signal TDMA (Crest factor: 2.7) SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

88 Page 88 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

89 Page 89 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GPRS 900 Mid-Body- Worn- Back (4up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band GSM 900 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=-2.00, Y=0.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

90 Page 90 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

91 Page 91 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GPRS 900 Mid-Body- Worn- Front (4up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 900 Mid- Body- Front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band GSM 900 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=1.00, Y=0.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

92 Page 92 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

93 Page 93 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GPRS 900 Mid-Body- Worn- Back (4up) with earphone<sim 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band GSM 900 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=8.00, Y=1.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

94 Page 94 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

95 Page 95 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 GPRS 900 Mid-Body- Worn- Back (4up) <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band GSM 900 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=0.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

96 Page 96 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

97 Page 97 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 Low-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 Low- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Low- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band DCS 1800 Channels Low Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-62.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

98 Page 98 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

99 Page 99 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 Mid-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

100 Page 100 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

101 Page 101 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 High-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 High- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 High- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band DCS 1800 Channels High Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

102 Page 102 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

103 Page 103 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 Mid-Tilt-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm,dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=6.00, Y=-7.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

104 Page 104 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

105 Page 105 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 Mid-Touch -Right <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

106 Page 106 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

107 Page 107 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 Mid-Tilt- Right <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27 ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-8.00, Y=24.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

108 Page 108 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

109 Page 109 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 Mid-Touch- Left <SIM2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-63.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

110 Page 110 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

111 Page 111 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 DCS 1800 Mid-Body-Worn- Back (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/DCS1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-6.00, Y=21.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

112 Page 112 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

113 Page 113 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 GPRS 1800 Mid-Body- Worn- Back (2up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-2 Slot; Communication System Band: DCS1800; Duty Cycle: 1:4.2; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 4.0) SURFACE SAR VOLUME SAR Maximum location: X=-7.00, Y=23.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

114 Page 114 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

115 Page 115 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 GPRS 1800 Mid-Body- Worn- Back (3up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-3 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.7; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 2.7) SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=17.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

116 Page 116 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

117 Page 117 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 GPRS 1800 Mid-Body- Worn- Back (4up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=-7.00, Y=17.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

118 Page 118 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

119 Page 119 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 GPRS 1800 Mid-Body- Worn- Front (4up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 1800 Mid- Body- Front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=7.00, Y=25.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

120 Page 120 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

121 Page 121 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 GPRS 1800 Mid-Body- Worn- Back (4up) with earphone <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=-7.00, Y=17.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

122 Page 122 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

123 Page 123 of 285 Test Laboratory: AGC Lab Date: Dec. 01,2015 GPRS 1800 Mid-Body- Worn- Back (4up) <SIM2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.44 mho/m; εr =40.27; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 22.0, Liquid temperature ( ): 21.5 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band DCS 1800 Channels Middle Signal TDMA (Crest factor: 2.0) SURFACE SAR VOLUME SAR Maximum location: X=-6.00, Y=21.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

124 Page 124 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

125 Page 125 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Low-Touch-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ; Duty Cycle: 1:1; Conv.F=4.97; Frequency: MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78;; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA Band 1 Low -Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band 1 Low -Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band WCDMA Band 1 Channels Low Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-60.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

126 Page 126 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

127 Page 127 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid-Touch-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ; Duty Cycle: 1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78;; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA Band 1 Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band 1 Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-58.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

128 Page 128 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

129 Page 129 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 High-Touch-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ; Duty Cycle: 1:1; Conv.F=4.97; Frequency: MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78;; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA Band 1 High -Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band 1 High -Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band WCDMA Band 1 Channels High Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-58.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

130 Page 130 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

131 Page 131 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid-Tilt-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78;; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA Band 1 Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band 1 Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-14.00, Y=25.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

132 Page 132 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

133 Page 133 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid-Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78;; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA Band 1Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band 1Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-50.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

134 Page 134 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

135 Page 135 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid-Tilt-Right <RMC> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/WCDMA BAND 1 Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND 1 Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-16.00, Y=32.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

136 Page 136 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

137 Page 137 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78;; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/WCDMA BAND 1 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND 1 Mid-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-3.00, Y=25.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

138 Page 138 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

139 Page 139 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid- Body- Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/WCDMA BAND 1 Mid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND 1 Mid-Body-Front//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=17.00, Y=26.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

140 Page 140 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

141 Page 141 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid- Body- Towards Grounds (HSPA) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/WCDMA BAND 1 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND 1 Mid-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-3.00, Y=25.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

142 Page 142 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

143 Page 143 of 285 Test Laboratory: AGC Lab Date: Nov. 27,2015 WCDMA Band 1 Mid- Body- Towards Grounds (RMC) - with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: Band 1UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.36mho/m; εr =40.78; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.9, Liquid temperature ( ): 21.7 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/WCDMA BAND 1 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND 1 Mid-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band WCDMA Band 1 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-5.00, Y=25.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

144 Page 144 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

145 Page 145 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid-Touch-Left (RMC ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ WCDMA BAND 8 Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-63.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

146 Page 146 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

147 Page 147 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid- Tilt-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-31.00, Y=7.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

148 Page 148 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

149 Page 149 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Low- Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: 882.4MHz;; Medium parameters used: f = 900 MHz; ζ=0.96mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Low -Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Low -Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band WCDMA BAND 8 Channels Low Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-79.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

150 Page 150 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

151 Page 151 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid- Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: 897.6MHz;; Medium parameters used: f = 900 MHz; ζ=0.96mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

152 Page 152 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

153 Page 153 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 High- Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: 912.6MHz;; Medium parameters used: f = 900 MHz; ζ=0.96mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 High -Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 High -Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band WCDMA BAND 8 Channels High Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-79.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

154 Page 154 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

155 Page 155 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid-Tilt-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-39.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

156 Page 156 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

157 Page 157 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=12.00, Y=-3.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

158 Page 158 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

159 Page 159 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid-Body-Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Mid-Body-Front/ Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=23.00, Y=7.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

160 Page 160 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

161 Page 161 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid-Body-Towards Ground (HSPA) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid- Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=10.00, Y=-5.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

162 Page 162 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

163 Page 163 of 285 Test Laboratory: AGC Lab Date: Dec. 03,2015 WCDMA Band 8 Mid-Body-Towards Grounds (RMC) - with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: UMTS; Communication System Band: BAND 8 UTRA/FDD; Duty Cycle:1:1; Conv.F=5.79 Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.17; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA BAND 8 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND 8 Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band WCDMA BAND 8 Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=8.00, Y=-6.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

164 Page 164 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

165 Page 165 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Low-Touch-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1930MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Low -Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Low - Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE Band 1 Channels Low Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-62.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

166 Page 166 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

167 Page 167 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Touch-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-60.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

168 Page 168 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

169 Page 169 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1High-Touch-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1970MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 High - Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 High - Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE Band 1 Channels High Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-60.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

170 Page 170 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

171 Page 171 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Tilt-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Tilt-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Tilt-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-17.00, Y=26.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

172 Page 172 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

173 Page 173 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Touch-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-49.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

174 Page 174 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

175 Page 175 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Tilt-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Tilt-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Tilt-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-10.00, Y=32.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

176 Page 176 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

177 Page 177 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Touch-Left(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-60.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

178 Page 178 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

179 Page 179 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Tilt-Left(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Tilt-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Tilt-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-17.00, Y=26.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

180 Page 180 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

181 Page 181 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Touch-Right(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-49.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

182 Page 182 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

183 Page 183 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Tilt-Right(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid- Tilt-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Tilt-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-9.00, Y=32.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

184 Page 184 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

185 Page 185 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Body-Back(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-6.00, Y=23.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

186 Page 186 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

187 Page 187 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Body-Front(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=15.00, Y=23.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

188 Page 188 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

189 Page 189 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Body-Back(1RB#0) with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-6.00, Y=23.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

190 Page 190 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

191 Page 191 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Body-Back(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-5.00, Y=23.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

192 Page 192 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

193 Page 193 of 285 Test Laboratory: AGC Lab Date: Dec. 12,2015 LTE Band 1 Mid-Body-Front(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=4.97; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.43 mho/m; εr =39.87; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):21.1, Liquid temperature ( ):21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE BAND 1 Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE Band 1 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=15.00, Y=23.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

194 Page 194 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

195 Page 195 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-57.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

196 Page 196 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

197 Page 197 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Tilt-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-57.00, Y=-8.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

198 Page 198 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

199 Page 199 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Low-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: 1720MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Low- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Low - Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE Band 3 Channels Low Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-55.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

200 Page 200 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

201 Page 201 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

202 Page 202 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

203 Page 203 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 High-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: 1775MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 High - Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 High - Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE Band 3 Channels High Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

204 Page 204 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

205 Page 205 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Tilt-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-5.00, Y=20.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

206 Page 206 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

207 Page 207 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Touch-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-57.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

208 Page 208 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

209 Page 209 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Tilt-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-57.00, Y=-8.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

210 Page 210 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

211 Page 211 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Touch-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

212 Page 212 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

213 Page 213 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Tilt-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=1.00, Y=16.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

214 Page 214 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

215 Page 215 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Body-Back(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-9.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

216 Page 216 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

217 Page 217 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Body-Front(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-7.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

218 Page 218 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

219 Page 219 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Body-Back(1RB#0) with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-9.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

220 Page 220 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

221 Page 221 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Body-Back(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-9.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

222 Page 222 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

223 Page 223 of 285 Test Laboratory: AGC Lab Date: Dec. 09,2015 LTE Band 3 Mid-Body-Front(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=4.77 Frequency: MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =39.76; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):20.7, Liquid temperature ( ):20.4 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/LTE Band 3 Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE Band 3 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-7.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

224 Page 224 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

225 Page 225 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Low-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2510MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Low -Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Low -Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE BAND 7 Channels Low Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-48.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

226 Page 226 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

227 Page 227 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-48.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

228 Page 228 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

229 Page 229 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 High-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2560MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 High -Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 High -Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE BAND 7 Channels High Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-47.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

230 Page 230 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

231 Page 231 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Tilt-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-39.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

232 Page 232 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

233 Page 233 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-47.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

234 Page 234 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

235 Page 235 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Tilt-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-15.00, Y=31.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

236 Page 236 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

237 Page 237 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Touch-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-48.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

238 Page 238 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

239 Page 239 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Tilt-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=10.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

240 Page 240 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

241 Page 241 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Touch-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-47.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

242 Page 242 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position The second hotspot is out of the 2dB

243 Page 243 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Tilt-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-15.00, Y=31.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

244 Page 244 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

245 Page 245 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Body-Back (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=15.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

246 Page 246 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

247 Page 247 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Body-Front (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-5.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

248 Page 248 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

249 Page 249 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Body-Back (1RB#0) with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=15.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

250 Page 250 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

251 Page 251 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Body-Back (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=15.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

252 Page 252 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

253 Page 253 of 285 Test Laboratory: AGC Lab Date: Dec. 14,2015 LTE Band 7 Mid-Body-Front (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=4.62 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.93 mho/m; εr =39.13; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 21.2, Liquid temperature ( ): 21.1 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 7 Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE BAND 7 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-3.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

254 Page 254 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

255 Page 255 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Touch-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-63.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

256 Page 256 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

257 Page 257 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Tilt-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Tilt-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Tilt-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-32.00, Y=3.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

258 Page 258 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

259 Page 259 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Low-Touch-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 842MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Low -Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Low -Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE BAND 20 Channels Low Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

260 Page 260 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

261 Page 261 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Touch-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

262 Page 262 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

263 Page 263 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 High-Touch-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 852MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 High -Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 High -Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE BAND 20 Channels High Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

264 Page 264 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

265 Page 265 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Tilt-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Tilt-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Tilt-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-29.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

266 Page 266 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

267 Page 267 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Touch-Left (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-62.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

268 Page 268 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

269 Page 269 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Tilt-Left (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Left Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Tilt-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Tilt-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Tilt Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-32.00, Y=3.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

270 Page 270 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

271 Page 271 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Touch-Right (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-56.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

272 Page 272 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

273 Page 273 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Tilt-Right (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Right Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Tilt-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Tilt-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Tilt Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-28.00, Y= SAR 10g (W/Kg) SAR 1g (W/Kg)

274 Page 274 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

275 Page 275 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Body-Back (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=9.00, Y=2.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

276 Page 276 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

277 Page 277 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Body-Front (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-15.00, Y=6.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

278 Page 278 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

279 Page 279 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Body-Back (1RB#0 ) with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=13.00, Y=5.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

280 Page 280 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

281 Page 281 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Body-Back (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Back Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=13.00, Y=5.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

282 Page 282 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position

283 Page 283 of 285 Test Laboratory: AGC Lab Date: Dec. 10,2015 LTE Band 20 Mid-Body-Front (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: S550 Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=6.36 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.95; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ): 20.7, Liquid temperature ( ): 20.6 SATIMO Configuration: Probe: SSE5; Calibrated: 07/10/2015; Serial No.: SN 19/15 EP254 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_01 Configuration/ LTE BAND 20 Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Front Band LTE BAND 20 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-15.00, Y=6.00 SAR 10g (W/Kg) SAR 1g (W/Kg)

284 Page 284 of 285 Z (mm) SAR (W/Kg) D screen shot Hot spot position