CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z

Size: px
Start display at page:

Download "CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z"

Transcription

1 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that Coherent LSM SW 95th Ave. Wilsonville, OR has been assessed by ANAB and meets the requirements of international standard ISO/IEC 17025:2005 and national standard ANSI/NCSL Z while demonstrating technical competence in the field of Refer to the accompanying Scope of Accreditation for information regarding the types of calibrations to which this accreditation applies. AC-1630 Certificate Number Certificate Valid: 02/06/ /15/2018 Version No. 004 Issued: 02/06/2017 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z Coherent LSM SW 95 th Ave Wilsonville, Oregon Ray Eller Phone: website: Valid to: March 15, 2018 Certificate Number: AC 1630 Optical Radiation Power Thermal Meters Power Optical Meters Energy Meters at 514 nm -Measure at nm at nm Laser Power Measuring kw Sensors at nm 193 nm 248 nm 100 µw to W µv to 2 V 10 nw to 30 mw 51 na to 19.1 ma 100 nj to 3 J 40 µv to 5 V (0.18 to 1.2) W ( to 7) V/W (360 to 440) W ( to ) V/W (0.5 to 150) W ( to 0.226) V/W 200 W to 1.1 kw ( to ) V/W 3 µj to 2 mj (24 to 80) V/J 60 µj to 7 mj (6 to 32) V/J 0. ARB, DMM, Attenuator 0. Current Source 0. ARB, Attenuator 2.9 % of reading 2.9 % of reading 3.7 % of reading 3.7 % of reading Sensor, Oscilloscope, Coherent Energy Meter Version 004 Issued: 02/06/2017 Page 1 of 2

3 Optical Radiation nm 10 µj to 160 mj (2 to ) V/J at 810 nm from 250 nm to 400 nm (UV- from 400 nm to 450 nm (VIS- from 450 nm to 1065 nm (VIS- from 800 nm to 1700 nm (IR- from 1700 nm to 1800 nm (IR W ( ) mv/w 200 nw to 20 µw (0.05 to 0.2) A/W 3 µw to 20 µw (0.01 to 0.1) A/W 3 µw to 100 µw (0.01 to 1) A/W 300 nw to 60 µw (0.1 to 1.2) A/W 200 nw to 1 µw (0.08 to 1) A/W 1.7 % of reading Sensor, Coherent Power Meter Notes: 1. Capabilities (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2. 2. This scope is formatted as part of a complete document including the Certificate of Accreditation No. AC Vice President Version 004 Issued: 02/06/2017 Page 2 of 2

4 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that Coherent Shared Services B.V. Dieselstrasse 5B Dieburg, Germany D has been assessed by ANAB and meets the requirements of international standard ISO/IEC 17025:2005 and national standard ANSI/NCSL Z while demonstrating technical competence in the field of Refer to the accompanying Scope of Accreditation for information regarding the types of calibrations to which this accreditation applies. AC Certificate Number Certificate Valid: 02/06/ /15/2018 Version No. 001 Issued: 02/06/2017 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

5 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z Coherent Shared Services B.V. Dieselstrasse 5B, Dieburg, Germany D Thorsten Thomas Phone: Valid to: March 15, 2018 Certificate Number: AC Optical Radiation Power Thermal Meters Power Optical Meters Energy Meters at 514 nm -Measure at nm 193 nm nm from 250 nm to 400 nm (UV- 100 µw to W µv to 2 V 10 nw to 30 mw 51 na to 19.1 ma 100 nj to 3 J 40 µv to 5 V (0.18 to 1.2) W ( to 7) V/W (0.5 to 150) W ( to 0.226) V/W 3 µj to 2 mj (24 to 80) V/J 10 µj to 160 mj (2 to ) V/J 0. ARB, DMM, Attenuator 0. Current Source 0. ARB, Attenuator Sensor, Oscilloscope, Coherent Energy Meter 200 nw to 20 µw (0.05 to 0.2) A/W Version 001 Issued: 02/06/2017 Page 1 of 2

6 Optical Radiation from 400 nm to 450 nm (VIS- 3 µw to 20 µw (0.01 to 0.1) A/W from 450 nm to 1065 nm (VIS- 3 µw to 100 µw (0.01 to 1) A/W from 800 nm to 1700 nm (IR- from 1700 nm to 1800 nm (IR- 300 nw to 60 µw (0.1 to 1.2) A/W 200 nw to 1 µw (0.08 to 1) A/W Notes: 1. Capabilities (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2. 2. This scope is formatted as part of a complete document including the Certificate of Accreditation No. AC Vice President Version 001 Issued: 02/06/2017 Page 2 of 2

7 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that Coherent LSM Toyo MK Building Toyo Koto-ku Tokyo Japan has been assessed by ANAB and meets the requirements of international standard ISO/IEC 17025:2005 and national standard ANSI/NCSL Z while demonstrating technical competence in the field of Refer to the accompanying Scope of Accreditation for information regarding the types of calibrations to which this accreditation applies. AC Certificate Number Certificate Valid: 02/06/ /15/2018 Version No. 001 Issued: 02/06/2017 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

8 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z Coherent LSM Toyo MK Building Toyo Koto-ku Tokyo, Japan Thorsten Thomas Valid to: March 15, 2018 Certificate Number: AC Optical Radiation Power Thermal Meters 100 µw to W µv to 2 V 0. ARB, DMM, Attenuator Power Optical Meters Energy Meters 10 nw to 30 mw 51 na to 19.1 ma 100 nj to 3 J 40 µv to 5 V 0. Current Source 0. ARB, Attenuator at 514 nm -Measure (0.18 to 1.2) W ( to 7) V/W at nm (0.5 to 150) W ( to 0.226) V/W from 250 nm to 400 nm (UV- 200 nw to 20 µw (0.05 to 0.2) A/W from 400 nm to 450 nm (VIS- from 450 nm to 1065 nm (VIS- from 800 nm to 1700 nm (IR- 3 µw to 20 µw (0.01 to 0.1) A/W 3 µw to 100 µw (0.01 to 1) A/W 300 nw to 60 µw (0.1 to 1.2) A/W Version 001 Issued: 02/06/2017 Page 1 of 2

9 Optical Radiation from 1700 nm to 1800 nm (IR- 200 nw to 1 µw (0.08 to 1) A/W Notes: 1. Capabilities (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2. 2. This scope is formatted as part of a complete document including the Certificate of Accreditation No. AC Vice President Version 001 Issued: 02/06/2017 Page 2 of 2

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that 2105 Seabrook Circle Seabrook, TX 77586 has

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Palindrome Technologies 100 Village Ct. Hazlet,

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Quality Engineering Service of the Chippewa

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board/ACLASS 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that 80 Industrial Drive Alpha, NJ 08865

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z ATC INC Guion Lane Indianapolis, IN Hemi Sagi Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z ATC INC Guion Lane Indianapolis, IN Hemi Sagi Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 4037 Guion Lane Indianapolis, IN 46268 Hemi Sagi Phone: 317 328 8492 CALIBRATION Valid To: March 31, 2019 Certificate Number: 2197.01

More information

Accreditation and Registration 07/25/18

Accreditation and Registration 07/25/18 Accreditation and Registration 07/25/18 THE DIETARY SUPPLEMENT SPECIALISTS ADVANCED LABORATORIES ACCREDITATION AND REGISTRATION DOCUMENTS PAGE CONTENT 3 UT CERTIFICATE OF FDA REGISTRATION 4-6 UT SCOPE

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc., has assessed the Laboratory of: (Hereinafter called the Organization) and hereby

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition

More information

Ductility SAE J81 (Sec. 4.8) ASME/ANSI B M; Customer Specified Requirements

Ductility SAE J81 (Sec. 4.8) ASME/ANSI B M; Customer Specified Requirements SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SPECIALTY SCREW CORPORATION 2801 Huffman Boulevard Rockford, IL 61103 Beth Halfman Phone: 815 969 4127 MECHANICAL Valid To: November 30, 2017 Certificate Number:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J.H. METROLOGY CO., INC. 1801 Hicks Road, Unit E Rolling Meadows, IL 60008 Neil E. Willert Phone: 847 991 0290 CALIBRATION Valid To:

More information

May 23, 2016 VIA . Air Technology Laboratories, Inc. Val Mallari E. Gale Avenue, Ste 130 City of Industry CA 91748

May 23, 2016 VIA  . Air Technology Laboratories, Inc. Val Mallari E. Gale Avenue, Ste 130 City of Industry CA 91748 May 23, 2016 VIA EMAIL Val Mallari 18501 E. Gale Avenue, Ste 130 City of Industry CA 91748 Re: Extension for DoD ELAP & ISO/IEC 17025: 2005 accreditation Dear Val: This letter is to inform you that your

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Iso Iec Certificate Horiba

Iso Iec Certificate Horiba We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with iso iec 17025 certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. 101-104, 1F, A Building, Taoyuan Street Safflower Ridge Industrial Area, Nanshan District Shenzhen, 518055, People s Republic of China

More information

Minimum Scheme Requirements to Certify Criminal Justice Restraints Described

Minimum Scheme Requirements to Certify Criminal Justice Restraints Described This document is scheduled to be published in the Federal Register on 07/13/2017 and available online at https://federalregister.gov/d/2017-14638, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE

More information

Who is doing your calibration work?

Who is doing your calibration work? The United Kingdom Accreditation Service Who is doing your calibration work? Are you confident that your goods and services and their component parts are based on measurements taken with correctly calibrated

More information

Lumen Maintenance of LED Light Source Test Report

Lumen Maintenance of LED Light Source Test Report Lumen Maintenance of LED Light Source Test Report This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence

More information

The Value of ANSI Accreditation. Top 10 Advantages. of accredited third-party conformity assessment

The Value of ANSI Accreditation. Top 10 Advantages. of accredited third-party conformity assessment The Value of ANSI Accreditation Top 10 Advantages of accredited third-party conformity assessment The American National Standards Institute (ANSI) offers highly recognized accreditation programs globally

More information

ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of

ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of A2LA has accredited ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 3933 U.S. Route 11 Cortland, NY 13045 Terence O Beirne Phone: 607 758 6316 www.intertek.com ELECTRICAL Valid To: March 31,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI 53012 Adam Alger Phone: 262 375 4400 ELECTRICAL (EMC) Valid to: January 31, 2019 Certificate

More information

ISO CALIBRATION WORLD STANDARD SERVICE FOR YOUR WORLD STANDARD TEST TOOLS.

ISO CALIBRATION WORLD STANDARD SERVICE FOR YOUR WORLD STANDARD TEST TOOLS. ISO 17025 CALIBRATION WORLD STANDARD SERVICE FOR YOUR WORLD STANDARD TEST TOOLS. MAXIMIZE TRACEABILITY AND ACCURACY FOR YOUR TEST EQUIPMENT. The accuracy of all measuring devices degrade over time. This

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JIANGSU YANGTZE TESTING, CERTIFCATION AND INSPECTION CORPORATION No.6-3, XingZhi Road, XingZhi Technology Park XinGang Economic Development Zone NanJing City,

More information

Accreditation Criteria For Conformity Assessment Bodies

Accreditation Criteria For Conformity Assessment Bodies Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2

More information

Workshop Item 1 - ISO 9001: 2008 migration

Workshop Item 1 - ISO 9001: 2008 migration Workshop Item 1 - ISO 9001: 2008 migration Joint IAF-ISO Communiqué on migration to ISO 9001: 2008 ISO 9001: 2008 does not contain any new requirements Accredited Certification to ISO 9001:2008 shall not

More information

Strengthening International Systems of Conformity Assessment

Strengthening International Systems of Conformity Assessment 2011/SOM1/SCSC/CON1/014 Session 8 Strengthening International Systems of Conformity Assessment Submitted by: International Laboratory Accreditation Cooperation (ILAC) 6 th Conference on Good Regulatory

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROSOFT EMC LABORATORY 1 17760 NE 67 th Court Redmond, WA 98052 Sajay Jose Email: sajose@microsoft.com Phone: 425 421 9799 ELECTRICAL (EMC) Valid to: August

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CFV SOLAR TEST LABORATORY, INC Ste. A University Blvd. SE Albuquerque, NM 87106

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CFV SOLAR TEST LABORATORY, INC Ste. A University Blvd. SE Albuquerque, NM 87106 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CFV SOLAR TEST LABORATORY, INC. 5600 Ste. A University Blvd. SE Albuquerque, NM 87106 Jim Crimmins (Authorized Representative) Phone: 505 998 0102 Email: Jim.Crimmins@cfvsolar.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SIEMIC (NANJING-CHINA) LABORATORIES 新美科 ( 南京 ) 信息技术有限公司 No. 2-1 Longcang Avenue Yuhua Economic Development Zone Yuhua District, Nanjing, 210039, People s Republic

More information

American Association for Laboratory Accreditation

American Association for Laboratory Accreditation Page 1 of 5 This document describes the accreditation requirements for organizations performing activities associated with Stationary Source Evaluation Testing per the requirements of ASTM D7036 (2004).

More information

The International Laboratory Accreditation Cooperation (ILAC) & The International Accreditation Forum (IAF)

The International Laboratory Accreditation Cooperation (ILAC) & The International Accreditation Forum (IAF) The International Laboratory Accreditation Cooperation (ILAC) & The International Accreditation Forum (IAF) Perspectives on ILAC & IAF Multilateral Mutual Recognition Arrangements Peter Unger, ILAC Chair

More information

GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES

GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2

More information

Discontinuing the Metallic Handcuffs Compliance Testing Program and Request for

Discontinuing the Metallic Handcuffs Compliance Testing Program and Request for This document is scheduled to be published in the Federal Register on 09/14/2016 and available online at https://federalregister.gov/d/2016-22057, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. No.140-1, Changan Street Bade District Taoyuan City, Taiwan (R.O.C.) Kevin Tsai email: kevin@atl-lab.com.tw Phone: 886-3-2710188 Ext.

More information

Domestic TPC Perspective on EPA Formaldehyde Regulation Jackson Morrill and Gary Heroux Composite Panel Association

Domestic TPC Perspective on EPA Formaldehyde Regulation Jackson Morrill and Gary Heroux Composite Panel Association Domestic TPC Perspective on EPA Formaldehyde Regulation Jackson Morrill and Gary Heroux Composite Panel Association Joint Industry Workshop on EPA Formaldehyde Rule Colfax, NC January 18, 2017 1 TPCs Under

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO. LTD. Fl. 3, Building A, Fei Yang Science Park No. 8 Long Chang Road, Block 67 BaoAn District, Guangdong Province,

More information

S. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7

S. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7 Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. No. 69 Pulongcun Puxinhu Industrial Zone, Tangxia Town Dongguan, Guangdong 523719 People s Republic of China Mr. David

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ECI TELECOM S LQLAB 30 Hasivim Street Petah-Tikva 4959338, ISRAEL Moshe Perel Phone: 972 52-4008642 Email: Moshe.Perel@ecitele.com ELECTRICAL Valid to: June

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TA TECHNOLOGY (SHANGHAI) CO., LTD. Building 3, No. 145 Jintang Rd. Tangzhen Industry Park Pudong, Shanghai, People s Republic of China Mr. Zhihui (Henry) Liu

More information

Better Regulatory Outcomes & the CASCO Toolbox

Better Regulatory Outcomes & the CASCO Toolbox 2011/SOM1/SCSC/CON1/013 Session 8 Better Regulatory Outcomes & the CASCO Toolbox Submitted by: Underwriters Laboratories 6 th Conference on Good Regulatory Practice Washington, D.C., United States 1-2

More information

Meterless Laser Power/Energy Measurement Simplifies Embedding

Meterless Laser Power/Energy Measurement Simplifies Embedding White Paper Meterless Laser Power/Energy Measurement Simplifies Embedding Traditional laser power and energy measurement instruments typically comprise a sensor head connected to separate meter electronics.

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SGS NORTH AMERICA, INC. 15150 Avenue of Science, Suite 300 1 San Diego, CA 92128 Nathan Gieselman Phone: 858 592 7100 ELECTRICAL Valid To: July 31, 2018 Certificate

More information

2003/09/15-Original Date 2003/11/06-Revision 2005/01/03 Revision

2003/09/15-Original Date 2003/11/06-Revision 2005/01/03 Revision Annex A Accreditation Body Parties to the MCAA 2003/09/15-Original Date 2003/11/06-Revision 2005/01/03 Revision ANSI-ASQ National Accreditation Board (ANAB) 600 N. Plankinton Avenue, Suite 300 P.O. Box

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CETECOM INC. 411 Dixon Landing Road Milpitas, CA Franz Engert Phone: ELECTRICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CETECOM INC. 411 Dixon Landing Road Milpitas, CA Franz Engert Phone: ELECTRICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CETECOM INC. 411 Dixon Landing Road Milpitas, CA 95035 Franz Engert Phone: 408 586 6205 ELECTRICAL Valid to: May 31, 2018 Certificate Number: 2135.01 In recognition

More information

DAkkS Who we are. Attesting competence, Assuring quality, Creating confidence.

DAkkS Who we are. Attesting competence, Assuring quality, Creating confidence. DAkkS Who we are Attesting competence, Assuring quality, Creating confidence. What is accreditation? Reliability through conformity assessment The demands on the quality of goods and services are growing

More information

Laboratory Accreditation Building Confidence on Testing Quality

Laboratory Accreditation Building Confidence on Testing Quality Laboratory Accreditation Building Confidence on Testing Quality Dr. George Anastasopoulos, Director (Conformity Assessment) & Prasanth S Ramakrishnan, MS, LEED-AP (Principal Staff & Program Manager) ASME

More information

CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222

CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222 This is to attest that CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222 Calibration Laboratory CL-108 has met the requirements of AC204, IAS Accreditation Criteria for Calibration Laboratories,

More information

ILAC The International Laboratory Accreditation Cooperation IAF The International Accreditation Forum Latest developments

ILAC The International Laboratory Accreditation Cooperation IAF The International Accreditation Forum Latest developments ILAC The International Laboratory Accreditation Cooperation IAF The International Accreditation Forum Latest developments 49 th CIML Meeting (04-06 November 2014) Auckland IAF and ILAC Objectives To maintain

More information

TRAINING COURSE CERTIFICATION (TCC) COURSE REQUIREMENTS

TRAINING COURSE CERTIFICATION (TCC) COURSE REQUIREMENTS TRAINING COURSE CERTIFICATION (TCC) COURSE REQUIREMENTS Testing and Calibration Laboratory Lead Assessor Training Course Exemplar Global International Training Certification Programs Exemplar Global, Inc.

More information

PRESENTATION OVERVIEW

PRESENTATION OVERVIEW ITU Regional Seminar for the Africa Region on Conformance and Interoperability Testing Centre(s) Accra (Ghana), 4-6 July 2011 Accreditation Bodies Presented by Andrew Kwan ITU Consultant 1 PRESENTATION

More information

Power and Energy Measurement Overview

Power and Energy Measurement Overview and Measurement Overview Compatibility Chart for Our Most Popular and LabMax-Pro LabMax-TOP and -TO FieldMate FieldMaxII-TOP and -TO & Standard Mode + High Speed Standard Mode Standard Mode Thermal SmartSensor

More information

Complete PC and handheld PDA based Laser Power Measurement. CW power measurement from 10 nw to 5 kw. Full Statistical and Power Trend Analysis

Complete PC and handheld PDA based Laser Power Measurement. CW power measurement from 10 nw to 5 kw. Full Statistical and Power Trend Analysis Coherent Instruments Power & Energy Meters LaserPAD FEATURES Complete PC and handheld PDA based Laser Power Measurement Up to 4 measurement channels standard for PC s (more for OEM configurations) Choice

More information

Certification Requirements Qualification-based Laboratory Assessor Certification Program

Certification Requirements Qualification-based Laboratory Assessor Certification Program Certification Requirements Qualification-based Laboratory Assessor Certification Program Exemplar Global Personnel Certification Programs Exemplar Global is accredited by the Joint Accreditation System

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA TESTING AND CERTIFICATION, S.A.U. Parque Tecnologico de Andalucia C/ Severo Ochoa 2 29590-Campanillas, Málaga, SPAIN Jose Maria Fernandez Phone: +34 952619100

More information

EUROPEAN ACCREDITATION LEGAL FRAMEWORK

EUROPEAN ACCREDITATION LEGAL FRAMEWORK EUROPEAN ACCREDITATION LEGAL FRAMEWORK ECIBC Plenary 2016 Ed Wieles 24 November 2016 CONTENTS European model on Accreditation Requirements for Accreditation bodies Harmonised standards for accreditation

More information

Base Standard Program ISO Medical Device CB Application for Accreditation

Base Standard Program ISO Medical Device CB Application for Accreditation Base Standard Program ISO 13485 Medical Device CB Application for Accreditation FA 5006 Authority: Accreditation Manager Effective: 2016/11/11 Section 1: CB Name, Contact Information, and Processing Fees

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GLOBAL COMPLIANCE AND TESTING CENTER OF HUAWEI TECHNOLOGIES CO., LTD. (RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO., LTD.). 1 Administration Building,

More information

ISO 9001 Auditing Practices Group Guidance on:

ISO 9001 Auditing Practices Group Guidance on: International Organization for Standardization International Accreditation Forum Date: 13 January 2016 ISO 9001 Auditing Practices Group Guidance on: Expected Outcomes The expected outcomes documents (given

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance Documents Policy and Index INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

More information

Accreditation of Forensic Science Service Providers

Accreditation of Forensic Science Service Providers Accreditation of Forensic Science Service Providers Laurel J Farrell Senior Accreditation Manager ANSI-ASQ National Accreditation Board Quality Matters Topics Accreditation what it is and what it is not

More information

Base Standard Program ISO Anti-Bribery Management Systems CB Application for Accreditation

Base Standard Program ISO Anti-Bribery Management Systems CB Application for Accreditation Base Standard Program ISO 37001 Anti-Bribery Management Systems CB Application for Accreditation FA 5021 Authority: Accreditation Manager Effective: 2017/01/20 Section 1: CB Name, Contact Information,

More information

Protocol on the Mutual Acceptance of the Results of Conformity Assessment

Protocol on the Mutual Acceptance of the Results of Conformity Assessment Protocol on the Mutual Acceptance of the Results of Conformity Assessment 1 Presentation Overview Overview of the Conformity Assessment (CA) Protocol Implementation and Next Steps Cooperation Agreement

More information

National Cooperation for Laboratory Accreditation Annual General Meeting International versus National Recognition: A Comparison

National Cooperation for Laboratory Accreditation Annual General Meeting International versus National Recognition: A Comparison National Cooperation for Laboratory Accreditation Annual General Meeting International versus National Recognition: A Comparison August 2011 1 Purpose of International Recognition Simply put, the purpose

More information

Base Standard Program ISO Trustworthy Digital Repositories MS CB Application for Accreditation

Base Standard Program ISO Trustworthy Digital Repositories MS CB Application for Accreditation Base Standard Program ISO 16363 Trustworthy Digital Repositories MS CB Application for Accreditation FA 5041 Authority: Accreditation Manager Effective: 2017/08/25 Section 1: CB Name, Contact Information,

More information

IECEE. IEC-ILAC-IAF Tripartite MoU CB-FCS Scheme and Market Control INTERNATIONAL ELECTROTECHNICAL COMMISSION

IECEE. IEC-ILAC-IAF Tripartite MoU CB-FCS Scheme and Market Control INTERNATIONAL ELECTROTECHNICAL COMMISSION INTERNATIONAL ELECTROTECHNICAL COMMISSION WORLDWIDE SYSTEM FOR CONFORMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT AND COMPONENTS IECEE IEC-ILAC-IAF Tripartite MoU CB-FCS Scheme and Market Control

More information

Inter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations

Inter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 07 Prepared by: MLA Committee and

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QUALITECH EMC & Product Safety Laboratory 30 Hasivim Street Petah-Tikva, 4959388, ISRAEL Teodor Weisz Phone: +972 3 926 6218 Email: Tedy.Weisz@ecitele.com Rami

More information

Form for Regular Reporting of Regional Instrument Centres

Form for Regular Reporting of Regional Instrument Centres Form for Regular Reporting of Regional Centres (please expand the cells as required to properly reflect your activities) Terms of Reference for Regional Centres (RICs) are available under:https://www.wmo.int/pages/prog/www/imop/instrument-reg-centres.html

More information

Accreditation Bodies in other

Accreditation Bodies in other Accreditation Bodies in other WHO Regions Jeanette Twell 6July2011 Overview ILAC Accreditation International Standards vs Guidance Auditing (NATA) EQAS/Proficiency Testing Take home message 2 International

More information

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES. Advisory Document on Tenders For Systems, Processes & Product Certifications

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES. Advisory Document on Tenders For Systems, Processes & Product Certifications ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES CAB Accreditation Advisory Document Document Title: Document Number: Advisory Document on Tenders For Systems, Processes & Product Certifications

More information

ATI Flat Rolled Products Holdings LLC. Materials Testing

ATI Flat Rolled Products Holdings LLC. Materials Testing This certificate is granted and awarded by the authority of the Nadcap Management Council to: 1300 Pacific Ave Natrona Heights, PA 15065 United States This certificate demonstrates conformance and recognition

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2016 Certificate Number:

More information

IAF Informative Document. Information on the Transition of Management System Accreditation to ISO/IEC :2015 from ISO/IEC 17021:2011

IAF Informative Document. Information on the Transition of Management System Accreditation to ISO/IEC :2015 from ISO/IEC 17021:2011 IAF Informative Document Information on the Transition of Management System Accreditation to ISO/IEC 17021-1:2015 from ISO/IEC 17021:2011 Issue 1 (IAF ID 11:2015) Issue 1 Information on the Transition

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ACADEMY OF METROLOGY AND QUALITY INSPECTION 1 NETC Building, No. 4 Tongfa Road Xili, Nanshan Shenzhen, Guangdong, 518055, People s Republic of China

More information

Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service

Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service 1. Overview of HKAS Originated as an accreditation scheme called HOKLAS in 1985

More information

1601 North A.W. Grimes, Suite B Round Rock, TX (512) Fax: (512) January 20, 2012

1601 North A.W. Grimes, Suite B Round Rock, TX (512) Fax: (512) January 20, 2012 1601 North A.W. Grimes, Suite B Round Rock, TX 78665 e-mail: info@ptitest.com (512) 244-3371 Fax: (512) 244-1846 January 20, 2012 Mr. Bobby Wollard Dynamic Flow Computers 12603 Southwest Freeway Suite

More information

Governmental acceptance supported by accredited certification. Presentation to the GLOBALG.A.P SUMMIT 2012

Governmental acceptance supported by accredited certification. Presentation to the GLOBALG.A.P SUMMIT 2012 Governmental acceptance supported by accredited certification Presentation to the GLOBALG.A.P SUMMIT 2012 Thomas Facklam INTERNATIONAL ACCREDITATION FORUM, INC. Certified once-accepted everywhere 1 Content

More information

Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation

Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Final August 9, 2016 Page 1 of 12 Section Number Table of Contents Title of Section 0 Purpose 1 Scope 2 References 3 Objectives 4 Criteria

More information

DRT POWER SYSTEMS, LLC - SPACECRAFT 300 EAST STREET NEW HAVEN, CT 06511

DRT POWER SYSTEMS, LLC - SPACECRAFT 300 EAST STREET NEW HAVEN, CT 06511 American Systems Registrar, LLC, a provider of third-party system registration and accredited by the ANSI-ASQ National Accreditation Board under the Aerospace Registration Management Program, in accordance

More information

Laser Measurement and Control

Laser Measurement and Control Measurement and Control 2009 Catalog and Measurement and Solutions Beam Diagnostics Superior Reliability & Performance Coherent Operational Excellence Operational Experience You Can Count On For over 40

More information

APLAC Application to Enter the APLAC MRA or to Extend Scope - APLAC MR 003

APLAC Application to Enter the APLAC MRA or to Extend Scope - APLAC MR 003 ASIA PACIFIC LABORATORY ACCREDITATION COOPERATION MUTUAL RECOGNITION ARRANGEMENT (MRA) COUNCIL Application to Become a Signatory to the APLAC Mutual Recognition Arrangement (APLAC MRA) or to Extend Scope

More information

OIML MAA Annual Report

OIML MAA Annual Report OIML MAA Annual Report NMi Certin B.V. (NL01) 2013 Table of contents Table of contents... 2 1. General information... 3 1.1. Issuing Authority information... 3 1.2. The organization... 3 1.3. Internal

More information

Mutual Recognition Agreement/Arrangement: General Introduction, Framework and Benefits

Mutual Recognition Agreement/Arrangement: General Introduction, Framework and Benefits Workshop for Caribbean countries to promote the development and implementation of Conformity Assessment programmes St. Augustine (Trinidad and Tobago) 2-4 December 2014 Mutual Recognition Agreement/Arrangement:

More information

Laboratory Accreditation Programmes

Laboratory Accreditation Programmes Laboratory Address PO Box 79085, Avonhead, Christchurch, 8446 3 Homersham Place, Burnside, Christchurch, 8053 Telephone 03 358-8309 Fax 03 358-2516 URL Authorised Representative Client No. 85 Programme

More information

On Quality Enhancement based on Efficient IT Deployment in EE Labs

On Quality Enhancement based on Efficient IT Deployment in EE Labs TUIasi, Romania Multidisciplinary Center of Structural Engineering& Risk Management On Quality Enhancement based on Efficient IT Deployment in EE Labs Gabriela M. Atanasiu, Professor, Dr. Outline 1 st

More information

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance Documents Policy and Index INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

More information

Benefits of Accreditation and Conformity Assessment for Business

Benefits of Accreditation and Conformity Assessment for Business 2008/SOM3/SCSC/CONF/032 Benefits of Accreditation and Conformity Assessment for Business Submitted by: APLAC 7 th Conference on Standards and Conformance Cusco, Peru 10-11 August 2008 Benefits of Accreditation

More information

An introduction to the National Voluntary Laboratory Accreditation Program

An introduction to the National Voluntary Laboratory Accreditation Program An introduction to the National Voluntary Laboratory Accreditation Program Sally Bruce, Chief for the National Voluntary Laboratory Accreditation Program (NVLAP) NIST Headquarters Gaithersburg, MD The

More information

PECB Change Log Form

PECB Change Log Form GENERAL INFORMATION Owner / Department* Approver / Department * Training Development Department Quality Assurance Department Date of Approval* 2018/03/21 Course name: Language: New Version: Previous Version:

More information

PARTNERING WITH THE REGULATORS: The Role for 3rd Party Accreditation in Food Safety

PARTNERING WITH THE REGULATORS: The Role for 3rd Party Accreditation in Food Safety PARTNERING WITH THE REGULATORS: The Role for 3rd Party Accreditation in Food Safety Roger Brauninger American Association for Laboratory Accreditation (A2LA), Frederick, Maryland Topics Role of Accreditation

More information

IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001)

IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001) IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001) (IAF MD 13:2015) Issue 1 IAF MD - Knowledge Requirements for Accreditation

More information

HIGH-SPEED PHOTODETECTOR. Thorlabs item # SIR5-FC

HIGH-SPEED PHOTODETECTOR. Thorlabs item # SIR5-FC HIGH-SPEED PHOTODETECTOR Thorlabs item # SIR5-FC Serial # SIR5-FC PHOTODETECTOR TECHNICAL DATA Wavelength Range Detector Material Detector Diameter Bandwidth (-3 db point) Rise and Fall Time Afterpulse

More information

SPECIFICATIONS HAND HELD PARTICLE COUNTER KC Higashimotomachi, Kokubunji, Tokyo , Japan

SPECIFICATIONS HAND HELD PARTICLE COUNTER KC Higashimotomachi, Kokubunji, Tokyo , Japan SPECIFICATIONS HAND HELD PARTICLE COUNTER KC-51 3-20-41 Higashimotomachi, Kokubunji, Tokyo 185-8533, Japan No. 10015-2E 15-06 Printed in Japan Outline The hand held particle counter KC-51 is designed to

More information

Resource Inspections Canada Inc. Certification Scheme Requirements

Resource Inspections Canada Inc. Certification Scheme Requirements 1. Purpose To describe the requirements for certification scheme for certified calibration laboratory technician for mechanical calibrations conducted by Resource Inspections Canada Incorporated. This

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION In terms of section 22(2)(b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),

More information