SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
|
|
- Roderick Williamson
- 6 years ago
- Views:
Transcription
1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC U.S. Route 11 Cortland, NY Terence O Beirne Phone: ELECTRICAL Valid To: March 31, 2019 Certificate Number: In recognition of the successful completion of the A2LA evaluation process (including an assessment of the organization s compliance with A2LA s EPA ENERGY STAR Accreditation Program 1 requirements), accreditation is granted to this laboratory to perform the following energy efficiency, automotive and airport lighting, and product safety tests: Test Technology: Test Method(s) 2 : Energy Efficiency Household Electrical Appliances: Measurement of Standby Power Battery Chargers IEC 62301:2005 (Edition 1.0); IEC 62301: (Edition 2.0) 10 CFR Part (aa) and Appendix Y to Subpart B External Power Supplies 10 CFR Part (bb) and Appendix Z to Subpart B; CSA C Audio, Video, Television (standby) CSA C Product Safety Electrical Appliances IEC ; IEC ; IEC ; IEC ; IEC ; IEC ; IEC ; IEC (A2LA Cert. No ) 07/11/2017 Page 1 of 5
2 Transportation Lighting Electrical Measurements and Simulation Testing Parameters AC Voltage (1mV to 25KV), 60 Hz AC Voltage (0.1 to 250)V, up to 500 MHz AC Current (1µA to 150A) DC Voltage (1mV to 15KV) DC Current (1µA to 10A) Power Factor / Efficiency / Crest Factor Power to 30KW Resistance (1mΩ to 25,000MΩ) Surge Up to 10kV / 5000A Transportation Lighting uses the following: Product Standard(s) Constant Current Regulator FAA Specification(s) AC 150/ (excluding Section Basic Impulse Level) Isolation Transformers AC 150/ Cable Connectors AC 150/ Circuit Selector Switch AC 150/ Power and Control Unit for Land and Hold Short Lighting Systems AC 150/ Beacons AC 150/ Runway and Taxiway Lights AC 150/ Wind Cones AC 150/ Obstruction Lights AC 150/ Runway End Identifier Lights AC 150/ Runway and Taxiway Signs AC 150/ Precision Approach Path Indicators AC 150/ Generic Visual Glideslope Indicator AC 150/ Lighted Visual Aid to Indicate Temporary Runway Closure Light Sources Other Than Incandescent and Xenon for Airport and Obstruction Lighting Fixtures AC 150/ Engineering Brief 67B (A2LA Cert. No ) 07/11/2017 Page 2 of 5
3 Transportation Lighting (Cont d) Product Standard(s) SAE Specification(s) Snowmobile Switching Devices SAE J68 Turn Signal Switch SAE J589 Hazard Warning Switch SAE J910 Motorcycle Stop Lamp Switch SAE J1167 Headlamps and Signaling Devices 49 CFR School Bus Stop Arm 49 CFR Area Lighting Controls ANSI C Cabling Products Electrical Performance Testing 3 Cables ASTM D4566; ANSI/TIA-568-B.2; ANSI/TIA-568-B.2-1, -9, and -10; ANSI/TIA-1183; IEC , -5, -6, -7, -8, -9, and -10; EN , -2-2, -3-1, -3-2, -4-1, -4-2, -5-1, -5-2, -6-1, -6-2, -9-1, -10-1, and Patch Cords ASTM D4566; ANSI/TIA-568-B.2 (including Mechanical Stress); ANSI/TIA-568-B.2-1, -9, and ANSI/TIA-568-B.2-9; ANSI/TIA-568-B.2-10; ANSI/TIA-568-C.2-1 and -2; IEC Connecting Hardware ANSI/TIA-568-C.2-1; IEC , -3, -4, -5, -41, -51, -7 and -71; IEC Cabling (links and channels) ASTM D4566; ANSI/TIA-568-C.2-1; ISO/IEC 11801; EN Inverter Testing IEC (2010/04/28 Ed:1); IEC (2011/06/23 Ed:1); IEC 62116; AS/NZS 3100 (2009 AMD ); AS/NZS (2005, 2015); AS/NZS (2005); IEEE 1547, IEEE ; UK G59, G83; VDE 4105, VDE 0124; CEI 0-21; NBR 16419, 16150; RD 1699 / UNE ; NERSA (07/2014); JEAC 9701; California Rule 21, Hawaii Rule 14H (A2LA Cert. No ) 07/11/2017 Page 3 of 5
4 EPA ENERGY STAR Tests Audio/Video Equipment Computers Displays Imaging Equipment Set Top Boxes & Cable Boxes Telephony (analog only) Televisions Uninterruptible Power Supplies Thermostats for Audio/Video Version 3.0; ENERGY STAR Test Method for Audio/Video (July 2012) for Computers Version 6.1; ENERGY STAR Computer Test Method (March 2016) for Displays Version 7.1; ENERGY STAR Test Method for Determining Display Energy (September 2015) for Imaging Equipment Version 2.0; ENERGY STAR Imaging Equipment Test Method (September 2013) for Set-top Boxes Version 4.1 and 5.0; ENERGY STAR Test Method for Set-top Boxes (CEA-2043, Set-top Box (STB) Power Measurement, June 2013, subject to clarifications in sec 4.2 to 4.9) for Telephony Version 3.0; ENERGY STAR Test Method for Telephony (November 2013) for Televisions Version 7.0; Uniform Test Method for Measuring the Energy Consumption of Television Sets incorporated in Appendix H to Subpart B of 10 CFR Part 430 for Uninterruptible Power Supplies Version 1.1; ENERGY STAR Test Method for Uninterruptable Power Supplies (May 2012) for Connected Thermostat Products; ENERGY STAR Method to Demonstrate Connected Thermostat Field Savings, Version 1.0 Electronics and Office Equipment for Small Network Equipment Version 1.0; for Data Center Storage Version A2LA provides accreditation to the U.S. EPA s Conditions and Criteria for Recognition of Laboratories for the ENERGY STAR Program by verifying an organization s compliance to A2LA document R222 - Specific Requirements - EPA ENERGY STAR Accreditation Program and to the related test methods listed above. (A2LA Cert. No ) 07/11/2017 Page 4 of 5
5 Accreditation by A2LA does not infer Recognition by the EPA for ENERGY STAR testing. Please verify this organization s recognition status by using the EPA s searchable database, located at 2 Mechanical testing contained in the above specification(s) is covered under the Mechanical Scope Cabling Products Testing Standards may include one or more of the following tests: - DC Resistance and DC Resistance Unbalance - Mutual Capacitance - Capacitance Unbalance: Pair-to-Ground - Impedance - Attenuation (Insertion Loss), including Attenuation at elevated temperature - Return Loss and Structural Return Loss - Crosstalk Loss, near-end (NEXT, PSNEXT) - Crosstalk Loss, far-end (FEXT, ELFEXT/ACRF, PSELFEXT/PSACRF) - Alien Crosstalk (ANEXT, PSANEXT, AFEXT, PSAFEXT, PSAACRF) - Coupling Attenuation - Surface Transfer Impedance (cables) and Shield Transfer Impedance (connectors) - Balance (TCL/LCL, TCTL/LCTL, ELTCTL/ELLCTL) - Propagation Delay and Propagation Delay Skew Specifications Client Proprietary: The accreditation also includes customer supplied standards and methods within the parameters listed on the scope and examples of methods listed below: GMUTS General Motors Uniform Test Standards Chrysler Compliance and Performance Procedures Ford System Design Specifications Saturn Component Technical Specifications Nissan Nissan Engineering Standards (A2LA Cert. No ) 07/11/2017 Page 5 of 5
6 Accredited Laboratory A2LA has accredited INTERTEK TESTING SERVICES NA INC. Cortland, NY for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets the A2LA R222 - Specific Requirements - EPA ENERGY STAR Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 11 th day of July President and CEO For the Accreditation Council Certificate Number Valid to March 31, 2019 For the types of tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. No. 69 Pulongcun Puxinhu Industrial Zone, Tangxia Town Dongguan, Guangdong 523719 People s Republic of China Mr. David
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. 6/F, the 3rd Phase of WanLi Industrial Building Shihua Road, Futian Free Trade Zone Shenzhen, Guangdong 518038 People
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROSOFT EMC LABORATORY 1 17760 NE 67 th Court Redmond, WA 98052 Sajay Jose Email: sajose@microsoft.com Phone: 425 421 9799 ELECTRICAL (EMC) Valid to: August
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ACADEMY OF METROLOGY AND QUALITY INSPECTION 1 NETC Building, No. 4 Tongfa Road Xili, Nanshan Shenzhen, Guangdong, 518055, People s Republic of China
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO. LTD. Fl. 3, Building A, Fei Yang Science Park No. 8 Long Chang Road, Block 67 BaoAn District, Guangdong Province,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TA TECHNOLOGY (SHANGHAI) CO., LTD. Building 3, No. 145 Jintang Rd. Tangzhen Industry Park Pudong, Shanghai, People s Republic of China Mr. Zhihui (Henry) Liu
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ACADEMY OF METROLOGY AND QUALITY INSPECTION 1 NETC Building, No. 4 Tongfa Road Xili, Nanshan District Shenzhen, Guangdong, 518055, People s Republic
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SIEMIC (NANJING-CHINA) LABORATORIES 新美科 ( 南京 ) 信息技术有限公司 No. 2-1 Longcang Avenue Yuhua Economic Development Zone Yuhua District, Nanjing, 210039, People s Republic
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JIANGSU YANGTZE TESTING, CERTIFCATION AND INSPECTION CORPORATION No.6-3, XingZhi Road, XingZhi Technology Park XinGang Economic Development Zone NanJing City,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QUALITECH EMC & Product Safety Laboratory 30 Hasivim Street Petah-Tikva, 4959388, ISRAEL Teodor Weisz Phone: +972 3 926 6218 Email: Tedy.Weisz@ecitele.com Rami
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GLOBAL COMPLIANCE AND TESTING CENTER OF HUAWEI TECHNOLOGIES CO., LTD. (RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO., LTD.). 1 Administration Building,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI 53012 Adam Alger Phone: 262 375 4400 ELECTRICAL (EMC) Valid to: January 31, 2019 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. 101-104, 1F, A Building, Taoyuan Street Safflower Ridge Industrial Area, Nanshan District Shenzhen, 518055, People s Republic of China
More informationANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of
A2LA has accredited ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z ATC INC Guion Lane Indianapolis, IN Hemi Sagi Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 4037 Guion Lane Indianapolis, IN 46268 Hemi Sagi Phone: 317 328 8492 CALIBRATION Valid To: March 31, 2019 Certificate Number: 2197.01
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CETECOM INC. 411 Dixon Landing Road Milpitas, CA Franz Engert Phone: ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CETECOM INC. 411 Dixon Landing Road Milpitas, CA 95035 Franz Engert Phone: 408 586 6205 ELECTRICAL Valid to: December 31, 2019 Certificate Number: 2135.01 In
More informationTest Report Number: G CRT-039g
3933 US Route 11 Cortland, New York 145 Telephone: +1 () 345-3851 Facsimile: +1 (7) 758-6637 www.intertek.com Project Number: G28364 Certificate of Conformance Number: 324722CRT-1f Date Issued: 5/29/15
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. No.140-1, Changan Street Bade District Taoyuan City, Taiwan (R.O.C.) Kevin Tsai email: kevin@atl-lab.com.tw Phone: 886-3-2710188 Ext.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CETECOM INC. 411 Dixon Landing Road Milpitas, CA Franz Engert Phone: ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CETECOM INC. 411 Dixon Landing Road Milpitas, CA 95035 Franz Engert Phone: 408 586 6205 ELECTRICAL Valid to: May 31, 2018 Certificate Number: 2135.01 In recognition
More informationDuctility SAE J81 (Sec. 4.8) ASME/ANSI B M; Customer Specified Requirements
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SPECIALTY SCREW CORPORATION 2801 Huffman Boulevard Rockford, IL 61103 Beth Halfman Phone: 815 969 4127 MECHANICAL Valid To: November 30, 2017 Certificate Number:
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS Washington Laboratories, Ltd. 1 7560 Lindbergh Drive Gaithersburg, Maryland 20879 John Repella Phone: 301-216-1500 TESTING Valid to: June 30, 2014 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ECI TELECOM S LQLAB 30 Hasivim Street Petah-Tikva 4959338, ISRAEL Moshe Perel Phone: 972 52-4008642 Email: Moshe.Perel@ecitele.com ELECTRICAL Valid to: June
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CFV SOLAR TEST LABORATORY, INC Ste. A University Blvd. SE Albuquerque, NM 87106
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CFV SOLAR TEST LABORATORY, INC. 5600 Ste. A University Blvd. SE Albuquerque, NM 87106 Jim Crimmins (Authorized Representative) Phone: 505 998 0102 Email: Jim.Crimmins@cfvsolar.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J.H. METROLOGY CO., INC. 1801 Hicks Road, Unit E Rolling Meadows, IL 60008 Neil E. Willert Phone: 847 991 0290 CALIBRATION Valid To:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA 731 Enterprise Drive Lexington, KY 40510 Mr. James Sudduth 859 226 1000 james.sudduth@intertek.com ELECTRICAL Valid to: April 30,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that 2105 Seabrook Circle Seabrook, TX 77586 has
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc., has assessed the Laboratory of: (Hereinafter called the Organization) and hereby
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA TESTING AND CERTIFICATION, S.A.U. Parque Tecnologico de Andalucia C/ Severo Ochoa 2 29590-Campanillas, Málaga, SPAIN Jose Maria Fernandez Phone: +34 952619100
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Coherent LSM 27650 SW 95th Ave. Wilsonville,
More informationEthernet and PoE Operation Over Single Pair Twisted-Pair Copper Cabling (SPE) Chris DiMinico AEM Technical Sales Test and Measurement
Ethernet and PoE Operation Over Single Pair Twisted-Pair Copper Cabling (SPE) Chris DiMinico AEM Technical Sales Test and Measurement Overview SPE is poised to enable a new class of low power devices that
More informationSpecification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
More informationAMP-TWIST* 6S Series SL Jack
Product Specification 108-93003 16/Mar/2011 Rev E AMP-TWIST* 6S Series SL Jack 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP NETCONNECT*, AMP- TWIST*
More informationStrengthening International Systems of Conformity Assessment
2011/SOM1/SCSC/CON1/014 Session 8 Strengthening International Systems of Conformity Assessment Submitted by: International Laboratory Accreditation Cooperation (ILAC) 6 th Conference on Good Regulatory
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SGS NORTH AMERICA, INC. 15150 Avenue of Science, Suite 300 1 San Diego, CA 92128 Nathan Gieselman Phone: 858 592 7100 ELECTRICAL Valid To: July 31, 2018 Certificate
More information[0.057] 5.8 [0.23]
Product Specification 7 March 13 Rev A1 SL Series Jacks, Category 6 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP NETCONNECT*, Category 6 SL Jacks used
More informationAmerican Association for Laboratory Accreditation
Page 1 of 5 This document describes the accreditation requirements for organizations performing activities associated with Stationary Source Evaluation Testing per the requirements of ASTM D7036 (2004).
More informationSafety Control. FS1A Multi-function Safety Relay. Optional Parts. Connecting Tool. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
More informationSafety Control. FS1A Multi-function Safety Relay. Optional Parts. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Control Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
More information[0.057] 5.8 [0.23]
Product Specification 7 June 13 Rev B SL Series Jacks, Category 6 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP NETCONNECT*, Category 6 SL Jacks used
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2020 Certificate Number:
More informationMini Digital Multimeter
User Manual Mini Digital Multimeter Model MN15A Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech MN15A MultiMeter. The MN15A offers
More informationENGINEERING SPECIFICATION 90 WATT POWER SUPPLY PART NUMBER PA P1
ENGINEERING SPECIFICATION 90 WATT POWER SUPPLY PART NUMBER PA-1900-32P1 EFFECTIVE DATE : Nov. 26, 2012 MODEL: PA-1900-32P1 SPECIFICATION REV :B PAGE 1 OF 13 REV. ITEM DESCRIPTIONS OF CHANGE CHANGED REF.
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationINTERNATIONAL STANDARD
ISO/IEC 11801-1 INTERNATIONAL STANDARD Edition 1.0 2017-11 Information technology Generic cabling for customer premises Part 1: General requirements INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 35.200
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) compact immunity test system www.axos.haefely.com a brand of Haefely is a subsidiary of Hubbell Incorporated. 2 AXOS
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Palindrome Technologies 100 Village Ct. Hazlet,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SIEMIC LABORATORIES 1 2206 Ringwood Ave. San Jose, CA 95131 Mr. Leslie Bai Phone: 408 526 1188 Email: leslie.bai@siemic.com Mr. Snell Leong Phone: 408 526 1188
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2016 Certificate Number:
More informationAMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)
610 National Regulator for Compulsory Specifications Act (5/2008): Amendment to the Compulsory Specification for switches for fixed installations (VC 8003) 39220 DEPARTMENT OF TRADE AND INDUSTRY STAATSKOERANT,
More informationLine Impedance Stabilization Network (LISN)
Model 3816/2 Line Impedance Stabilization Network (LISN) User Manual ETS-Lindgren Inc. reserves the right to make changes to any product described herein in order to improve function, design, or for any
More informationEMOSAFE EN-30 1 FEATURES AND ADVANTAGES 2 GENERAL DESCRIPTION. Product Datasheet. Gigabit Network Isolator in aluminium housing December 2015 ENGLISH
ENGLISH EMOSAFE EN-30 Product Datasheet Gigabit Network Isolator in aluminium housing December 2015 1 FEATURES AND ADVANTAGES Gigabit Ethernet Hardwearing aluminium housing Optionally usable mounting bracket
More informationELECTROSTATIC DISCHARGE SIMULATOR
ELECTROSTATIC DISCHARGE SIMULATOR Designed by HIGH VOLTAGE TEST SOLUTIONS 2 ONYX SUMMARY The ONYX is a state of the art electrostatic discharge simulator available in 16 kv or 30 kv versions. It is the
More informationIso Iec Certificate Horiba
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with iso iec 17025 certificate
More informationTest Report S
Sunkom Pty Ltd FDX card s A101, A102, A104 and A108 Laboratory Details All tests were performed at : Comtest Laboratories Pty. Ltd. Unit 1 / 570 City Road South Melbourne Victoria 3205 Australia Telephone
More informationAGSF-L GUIDANCE SIGNS. FAA LED Light Bar Airfield Guidance Sign. Compliance with Standards. Features. Uses. Construction.
FAA LED Light Bar Airfield Guidance Sign Compliance with Standards FAA: Uses L-8Y(L), L-8R(L), L-8L(L) and L-8B(L) AC 50/55- (Current Edition) and the FAA Engineering Brief No. 67. ETL Certified. FAA L-8Y(L)
More informationSafety Standards. Model Number:
150AAS12 F/B Highlights & Features Meet DOE Level VI and ErP Lot 7 Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationISO/IEC 11801: (E)
ISO/IEC 11801:2002-09 (E) Information technology_- Generic cabling for customer premises CONTENTS FOREWORD...10 INTRODUCTION...11 1 Scope...13 2 Normative references...13 3 Definitions, abbreviations and
More informationTechnical Requirements for High-voltage DC Power Feeding Interfaces of ICT equipment
Technical Requirements for High-voltage DC Power Feeding Interfaces of ICT equipment TR No. 176002 1.1.EDITION April 1st, 2015 Nippon Telegraph and Telephone Corporation Introduction This document describes
More informationTest Report modcon - PS88A6M
modcon - PS886M Transmission Characteristics of PS886M /CT6 PS886M shielded CT6 plug fulfills the requirements for electrical transmission performance according to IEC 663-7-51; detail specification for
More informationSafety Standards. Model Number:
090AAS15 F/B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationMinimum Scheme Requirements to Certify Criminal Justice Restraints Described
This document is scheduled to be published in the Federal Register on 07/13/2017 and available online at https://federalregister.gov/d/2017-14638, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE
More informationENGINEERING SPECIFICATION SHEET SPEC. Revision History
SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension
More informationIntroduction to Key Principles of Telecommunications Cabling
Introduction to Key Principles of Telecommunications Cabling Dimitris Filippou Technical Director, Ltd. IEEE Member, BICSI Country Chair, ELOT Technical Committee TC93 Member, CENELEC TC215 Delegate of
More informationTechnical Specification
EMC TESTS, SEMINARS, HARD AND SOFTWARE Technical Specification No. E-MIG1206-3P.doc Revised: 10.March 2007 1 MIG Tester Type MIG1206-3P 1 MIG Tester Type MIG1206-3P 1 1.1 Introduction 1 2 General 2 2.1
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. 1274 Anvilwood Avenue Sunnyvale, CA 94089 Ms. Lisa Tang Phone: 408 732 9162 ELECTRICAL Valid To: September 30, 2020 Certificate
More informationREPORT INTERTEK TESTING SERVICES, INC.
REPORT INTERTEK TESTING SERVICES, INC. 3933 US ROUTE 11, CORTLAND, NEW YORK 13045 ORDER NO.: J20042193-406 DATE: March 19, 2001 REPORT NO.: J20042193-004 RENDERED TO: Tyco Electronics 3700 Reidsville Rd.
More informationENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5
Table of Contents 1 SCOPE...5 2 ELECTRICAL SPECIFICATION...5 2.1 INPUT REQUIREMENT... 5 2.1.1 Input voltage range... 5 2.1.2 Input frequency range... 5 2.1.3 AC inrush current... 5 2.1.4 Input current...
More informationSafety Standards. Model Number:
080AAS12 A Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationR&Mfreenet Advanced Cat 6A Shielded Connection Module
R&Mfreenet Advanced R&Mfreenet Advanced Cat 6A Connection Module The R&Mfreenet Cat 6A shielded connection modules, part of the Advanced cabling system, are ideal for voice, fast data transmissions and
More informationAMP-TWIST* Modular Jack, UTP, Category 6A
Product Specification 5 July 13 Rev A AMP-TWIST* Modular Jack, UTP, Category 6A 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for TE Connectivity*, 6A UTP AMP-
More information/June/2013 Rev B
Qualification Test Report 501-93016 14/June/2013 Rev B AMP-TWIST* 6S Series SL Jack 1. INTRODUCTION 1.1 Purpose Testing were performed on AMP-TWIST* 6S Series SL Jack, to determine its conformance to the
More informationLumen Maintenance of LED Light Source Test Report
Lumen Maintenance of LED Light Source Test Report This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence
More informationSafety Standards. Model Number:
060AAS19 B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More information060AAS19 B MDS. MDS Medical AC-DC Adapter 19Volt, 60Watt / MDS-060AAS19 B. Highlights & Features. Safety Standards. Model Number: General Description
060AAS19 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
More informationSeries MPM-X12Y 120W PFC MEDICAL POWER ADAPTER
FEATURES 120W medical adapter with active PFC Green power CEC/Energy star group complied Designed to meet medical standard type BF rated Conductive EMI meets CISPR/FCC class B Wall mount mechanical construction
More informationFinding an Independent Third Party Battery Test Lab
Finding an Independent Third Party Battery Test Lab Battery Power 2013 Denver, CO (06 June, 2013) Tom O Hara, Global Business Manager / Advisory Services 1 Global Presence Energy Storage v USA Detroit,
More informationAS/NZS 3080:2003 AS/NZS
AS/NZS 3080:2013 (ISO/IEC 11801:2011, MOD) Incorporating Amendment No. 1 Australian/New Zealand Standard Information technology Generic cabling for customer premises Superseding AS/NZS 3080:2003 AS/NZS
More informationEMOSAFE EN-100 Network Isolators for PCB assembly
ENGLISH EMOSAFE EN-100 Network Isolators for PCB assembly Product Datasheet 1 FEATURES AND ADVANTAGES Suitable for PCB assembly: pluggable or solderable Ultra-compact Conforms to IEC 60601-1 10/100/1000
More informationSurge Current Generators PG **-****
Surge Current Generators PG **-**** Waveform 8/20 µs Surge current: 40 ka - 100 ka The surge current generators PG **-*** generate standard impulse currents with waveform 8/20 µs according to IEC, EN,
More informationThe Solid-State Decoupler (SSD)
The Solid-State Decoupler (SSD) Installation Instructions Introduction The Solid-State Decoupler (SSD) is a solid-state DC isolation/ac grounding (i.e., coupling) device design ed for use in conjunction
More informationThe following standards are the basis of design, manufacture, and test of SPD equipment: Guide for Surge Voltages in Low-Voltage AC Power Circuits
ENGINEERING BULLETIN Manufacturing & Test Standards for SPDs APT SPD/TVSS are manufactured and tested in accordance with applicable industry standards. UL Marks are found on APT equipment. These are the
More informationISOMETER isopv with coupling device AGH-PV
Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) for photovoltaic plants up to AC 793 V/DC 1100 V Vorläufiges Datenblatt IsoPV_D00024_02_D_XXEN/07.2018 ISOMETER with coupling
More informationSafety Standards. Model Number:
060AAS15 B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationIndependent Testing - For End User Confidence
Independent Testing - For End User Confidence QUALIFICATION TESTING OF SCREENED CATEGORY 6 A ISO/IEC, CENELEC & TIA CONNECTING HARDWARE ACCORDING TO REQUIREMENTS OF EDITION 2.2 OF ISO/IEC 11801, CENELEC
More informationR&Mfreenet Advanced Cat 6 A Unshielded Connection Module
R&Mfreenet Advanced R&Mfreenet Advanced Cat 6 A Connection Module The R&Mfreenet Cat 6 A unshielded connection modules, part of the Advanced cabling system, are ideal for voice, fast data transmissions
More informationReproduced by Sabinet Online in terms of Government Printer s Copyright Authority No dated 02 February 1998 DEPARTMENT OF TRADE AND INDUSTRY
26 No. 37654 GOVERNMENT GAZETTE, 23 MAY 2014 DEPARTMENT OF TRADE AND INDUSTRY No. R. 379 23 May 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008) AMENDMENT OF THE COMPULSORY SPECIFICATION
More information1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882
1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882 This manual is intended for use in support of installation, commissioning and configuration of the 1/32-DIN Temperature
More informationENGINEERING SPECIFICATION. 40W AC Adaptor. Part Number: PA W1
Engineering Specification ENGINEERING SPECIFICATION 40W AC Adaptor Part Number: PA-1400-26W1 Approval By: A Anson Hsu 2013.04.29 SHEET 1 of 10 Revision History Engineering Specification REV.X01, 2012.07.24
More informationIndependent Testing - For End User Confidence
Independent Testing - For End User Confidence QUALIFICATION TESTING OF SCREENED CATEGORY 5 (CAT. 5e) CONNECTING HARDWARE ACCORDING TO REQUIREMENTS OF PROPOSED CENELEC 2nd EDITION EN 50173, PROPOSED ISO/IEC
More informationStandards Update Notice (SUN) Issued: April 25, 2017
Standard Information Standard Number: UL 1951 Standard Name: Electric Plumbing Accessories Standard Edition and Issue Date: 2 nd Edition Dated July 22, 2011 Date of Revision: February 21, 2017 Date of
More informationRegulatory Update Brazil
Product Compliance Specialists Ltd Tel: +44 1844 273 277 The Malthouse, Malthouse Square, Fax: +44 1844 273 278 Princes Risborough www.productcompliancespecialists.com Bucks, HP27 9AZ info@productcompliancespecialists.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MET LABORATORIES, INC 914 West Patapsco Avenue Baltimore, MD 21230 Frank Casbolt Phone 410 949 1867 Frank.Casbolt@metlabs.com http://www.metlabs.com ELECTRICAL
More informationBulletin 817 Thermistor Protection Relay
6 Bulletin 817 Accurate Temperature Monitoring for Critical Applications Automatic, Manual and Remote Reset Status Indicating LEDs DIN Rail or Panel Mounting Guarded Terminals IP20 1 N.O. and 1 N.C. Output
More informationMini Digital Multimeter
User's Guide Mini Digital Multimeter Model MN15 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Back to the Extech MN15/MN16 Series
More informationISO/IEC Edition INFORMATION TECHNOLOGY GENERIC CABLING FOR CUSTOMER PREMISES. Part 1: General requirements CORRIGENDUM 1
ISO/IEC 11801-1:2017/COR1:2018 1 ISO/IEC 11801-1 Edition 1.0 2017-11 INFORMATION TECHNOLOGY GENERIC CABLING FOR CUSTOMER PREMISES Part 1: General requirements CORRIGENDUM 1 Foreword Replace, in list item
More informationFacilities Evaluation Detailed Standards for New Renewable Energy
1/52 Facilities Evaluation Detailed Standards for New Renewable Energy Small Photovoltaic Inverter (Grid-connected, Stand-alone) New & Renewable Energy Assessment Center, Digital Industry Division, Korea
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MET LABORATORIES, INC 1 3162 Belick Street Santa Clara, CA 95054 Frank Casbolt Phone: 410 949 1867 Frank.Casbolt@metlabs.com http://www.metlabs.com ELECTRICAL
More information