10514NAT GTA Diploma of Grain Management
|
|
- Ross Lee
- 6 years ago
- Views:
Transcription
1 10514NAT GTA Diploma of Grain Management
2 Why Introduce a Diploma of Grain Management? GTA s objective is to educate stakeholders across the grain value chain from producer to end user GTA worked in conjunction with Rural Skills Australia to develop the Diploma of Grain Management An extensive industry consultation process was undertaken during the development This consultation process identified the need for an industry specific accredited qualification The diploma was approved by the Australian Skills Quality Authority (ASQA) in October The diploma workshops commenced delivery in February
3 10514NAT Diploma of Grain Management GTA provides training to meet the needs of industry across the grain value chain - from producer to end user. To achieve the Diploma of Grain Management you must complete 10 units made up of 3 core units and 7 elective units. There are no prerequisites for any units. The completion of all GTA workshops will credit you with 3 core units and 5 electives leaving only 2 elective units to be chosen to make up the 10 units for the Diploma of Grain Management. Completion of the Authorised Officers course will be accepted as a credit transfer for one elective unit.
4 Units of the Diploma CORE UNITS (C) Unit code Unit title DGMRUL501A Apply knowledge of trade rules and contracts *** DGMSTA502A Apply grain industry standards *** DGMMAR503A Review and evaluate grain markets *** ELECTIVE UNITS (E) clustered with AHCBAC309A (E) clustered with AHCBUS502A (E) Unit code Unit title DGMPER504A Report on grain trading performance and risk *** DGMMER505A Develop and apply strategies for grain merchandising *** DGMDIS506A Maintain knowledge of the GTA Dispute Resolution Service *** AHCBAC309A Sample and test grain and related commodities clustered as above (C) unit AHCBAC406A Maintain grain quality in storage AHCBAC504A Plan and manage a stored grain program AHCBUS501A Manage staff AHCBUS502A Market products and services clustered as above (C) unit AHCOHS401A Maintain occupational health and safety (OHS) processes BSBHRM405A Support recruitment selection and induction of staff TLIL5019A Implement and monitor transport logistics TLIL5026A Manage export logistics *** units for which GTA Workshops are available
5 Assessment All GTA workshops have an online assessment Cost is included in the registration fee Assessment available upon completion of this workshop
6 Completing the Assessment Students will have 8 weeks to complete the assessment Each assessment task includes a number of activities and /or tasks to test the students knowledge and competency. GTA training uses a benchmark of 70% knowledge and skill level for a competent result. Contact the GTA training manager on or training@graintrade.org.au for further enquires and assistance GTA website -
7 Recognition of Prior Learning (RPL) Prior learning or industry experience recognised with evidence of competency relevant to the unit for which RPL is being sought Process enables the student to gain units without necessarily completing workshops Summary of units available on the GTA website RPL applications are bundled in lots of 3 units as a minimum RPL guide is on the GTA website and further information is available at training@graintrade.org.au
8 Enrolments and Learning Management System (LMS) A student login is sent to each participant on completion of the workshop When the student has received their login they will be required to download the assessment to their desktop/laptop for completion. Upon completion they will need to upload their assessment onto the LMS and submit. It would be estimated that the diploma would take approximately 3 years to complete. All student assessments and RPL evidence is accessed and uploaded through the LMS
RECOGNITION POLICY (RPL)
1 RECOGNITION POLICY (RPL) POLICY In accordance with the Standards for RTOs 2015 MBA Group Training will recognize AQF qualifications and Statement of Attainment issued by other Registered Training Organisations
More informationRTO Policy 7: Credit Transfer
RTO Policy 7: Credit Transfer 2 RTO POLICY 7: CREDIT TRANSFER OWNERSHIP This policy is the responsibility of CPA Australia s Registered Training Organisation () working group ( Working Group). Scope CPA
More information01 April Jonathan Goldberg / Samantha Long Global House 3 Pearce Street Berea East London
01 April 2016 Jonathan Goldberg / Samantha Long Global House 3 Pearce Street Berea East London Tel: 043 721 1030 / 083 281 9571 E-mail: johnny@iafrica.com / sdf@globalbusiness.co.za Dear Jonathan Goldberg
More informationRTO Policy 9: Issuing Qualifications
RTO Policy 9: Issuing Qualifications 2 RTO POLICY 9: ISSUING QUALIFICATIONS OWNERSHIP This policy is the responsibility of CPA Australia s Registered Training Organisation () working group ( Working Group).
More informationDocument Type Policy Procedure Process / Workflow Guideline Checklist. Version 1.3 Implementation date 22/02/2018 Review date 4/02/2019
Version Information Document Title Policy Document Type Policy Procedure Process / Workflow Guideline Checklist Version 1.3 Implementation date 22/02/2018 Review date 4/02/2019 Policy Author / Editor Anna
More informationA guide to. exemptions
A guide to This guide outlines how to apply for from modules of the CIPS qualifications. We recognise that many learners undertake prior learning that can be equivalent to the CIPS qualification and our
More informationASIC RG206 CPD PROGRAM
ASIC RG206 CPD PROGRAM FLEXIBLE FINANCIAL SERVICES This program meets the ASIC licence requirements for RG206. ACHIEVE YOUR ASIC LICENSING NEEDS WITH INDUSTRY EXPERTS. UNDERTAKE THIS ONLINE PROGRAM TO
More informationThe Certificate IV in Training and Assessment qualification TAE40110 is currently the standard for anyone wanting to become a qualified trainer.
Training and Assessment is already considered a valuable qualification to many employers and organisations, and maintaining currency is absolutely essential if you wish to become a trainer at an Australian
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2015.
NZQF NQ Ref 0534 Version 4 Page 1 of 15 National Diploma in (Level 6) with strands in Mechanical, Production, and Mechanical Services, and with an optional strand in Practical Endorsement Level 6 Credits
More informationCIBTAC LEVEL 4 DIPLOMA IN SPA AND SALON MANAGEMENT CBD11 QAN 600/3328/9. Qualification Specification
CIBTAC LEVEL 4 DIPLOMA IN SPA AND SALON MANAGEMENT CBD11 QAN 600/3328/9 Qualification Specification CONTENTS CONTENTS... 2 1. CIBTAC... 3 2. Introduction to CIBTAC qualifications... 3 3. Level of the CIBTAC
More informationNational Certificate in Construction Trades (Supervisor) (Level 4) with an optional strand in Business Management
NZQF NQ Ref 1661 Version 2 Page 1 of 8 National Certificate in Construction Trades (Supervisor) (Level 4) with an optional strand in Business Management Level 4 Credits 58 This qualification has been reviewed.
More informationBSB51615 Diploma of Quality Auditing. Information Pack
BSB51615 Diploma of Quality Auditing Information Pack Confidently blast through your RTO audit! Become a skilled expert so you can be confident that you re always audit ready. Our BSB51615 Diploma of Quality
More informationExclusive Fast Track Opportunity for CEng Professionals - Gain a recognised Level 5 Diploma in Management and Leadership Qualification
Exclusive Fast Track Opportunity for CEng Professionals - Gain a recognised Level 5 Diploma in Management and Leadership Qualification Programme Overview The IET has joined with the Chartered Management
More informationThis entry-level project management course will give you the confidence to become an outstanding team member and achieve project success.
Just imagine getting the job you ve always wanted! The Certificate IV in Project Management Practice will give you the skills needed to launch yourself into the stimulating, challenging and dynamic project
More informationCERTIFICATE IV IN COMPLIANCE & RISK MANAGEMENT
10131NAT CERTIFICATE IV IN COMPLIANCE & RISK MANAGEMENT Associate GRC Institute (AGRCI) GRC Institute 10131NAT Certificate IV in Compliance and Risk Management Overview INTRODUCTION developed to provide
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2019
NZQF NQ Ref 0282 Version 4 Page 1 of 9 National Certificate in Carpet Manufacture (Carpet Weaving) (Level 3) with strands in Wilton Weaving, Spool Axminster Weaving, and Gripper Axminster Weaving Level
More informationUNIFORM STANDARDS FOR PLT COURSES AND PROVIDERS
UNIFORM STANDARDS FOR PLT COURSES AND PROVIDERS July 2015 212001734.08 Contents 1. CORE STANDARDS FOR PLT COURSES 1 1.1 Fundamental requirement 1 1.2 Course objectives 1 1.3 Course content 1 1.4 Teaching
More informationThe Certificate IV in Training and Assessment qualification TAE40110 is currently the standard for anyone wanting to become a qualified trainer.
The Certificate IV in Training and Assessment qualification TAE40110 is currently the standard for anyone wanting to become a qualified trainer. This TAE40110 course will teach a myriad of training and
More informationQualification details
Qualification details Title New Zealand Certificate in Project Management (Level 4) Version 1 Qualification type Certificate Level 4 Credits 60 NZSCED 080315 Management and Commerce > Business and Management
More informationDiploma of Aeroskills (Mechanical) MEA50215 CASR Part 66 B1 licence The largest CASR and EASA Part 147 approved Maintenance Training Organisation in
Diploma of Aeroskills (Mechanical) MEA50215 CASR Part 66 B1 licence The largest CASR and EASA Part 147 approved Maintenance Training Organisation in Australia. RTO Aviation Australia Name Aviation Australia
More informationABOUT THE CPR PROGRAM. What is the Certified Professional Restaurateur Program?
ABOUT THE CPR PROGRAM What is the Certified Professional Restaurateur Program? R&CA s Certified Professional Restaurateur (CPR) program recognises the essential business management skills required to operate
More informationQualification details
Qualification details Title New Zealand Certificate in Construction Related Trades (Supervisor) (Level 4) [Ref: 2381] Version 1 Qualification type Certificate Level 4 Credits 58 NZSCED 040399 Architecture
More informationNZQF NQ Ref 1545 Version 2 Page 1 of 13
NZQF NQ Ref 1545 Version 2 Page 1 of 13 National Certificate in (Level 5) with strands in Engineering Fabrication, Fire Protection, General and Maintenance Engineering, Mechanical Services, and Precision
More informationCIBTAC LEVEL 3 CERTIFICATE IN MEDIA MAKE-UP CMC02 QAN 603/2350/4. Qualification Specification
CIBTAC LEVEL 3 CERTIFICATE IN MEDIA MAKE-UP CMC02 QAN 603/2350/4 Qualification Specification CONTENTS 1. CIBTAC... 3 2. Introduction to CIBTAC qualifications... 3 3. Level of the CIBTAC Level 3 Certificate
More informationQualification details
Qualification details Title New Zealand Certificate in Business (First Line Management) (Level 4) Version 1 Qualification type Certificate Level 4 Credits 60 NZSCED 080301 Management and Commerce > Business
More informationHow to enrol Select the units you want to study, then enrol.
Bachelor of Business On this page... Overview Career Outcomes Transition Arrangements Award Requirements Recognition of Prior Learning / Credit Registering in this Course Recommended Study Pattern Course
More informationThis course is nationally recognised under the Australian Qualifications Framework (AQF).
WORKFORCE TRAINING & DEVELOPMENT FNS42015 - Certificate IV in Banking Services Certificate IV in Banking Services is This qualification is designed to reflect job roles requiring specialist understanding
More informationQualification Specification
CIBTAC Level 3 Award in Healthy Eating and Wellbeing for the Complementary Therapies Client CCQ12 QAN 600/6778/0 Qualification Specification CIBTAC V1.1(QCF) 1 Contents Contents... 2 1. CIBTAC... 3 2.
More informationNOCN_Cskills Awards Level 1 Diploma in Construction and Civil Engineering Services (Construction)
NOCN_Cskills Awards Level 1 Diploma in Construction and Civil Engineering Services (Construction) Reference : 600/8622/1 Total Qualification Time (TQT) : 430 Credits : 43 Award Code : DIP079 Minimum Age
More informationLearn from experienced trainers with exceptional communication skills.
1. Aims Unity College offers a unique range of training options for the Certificate IV in Training and Assessment tailored to meet both individual and organisational requirements. These training options
More informationSMART AND SKILLED UPDATE NO May 2018
www.smartandskilled.nsw.gov.au SMART AND SKILLED UPDATE NO. 59 23 May 2018 Contents 1) Qualifications added to the NSW Skills List 2) Revisions to Training Packages 3) Reporting Training Activity Data
More informationARMA Professional Qualifications. Marie Garnett Head of Professional Development
ARMA Professional Qualifications Marie Garnett Head of Professional Development Professional Recognition ARMA has long harboured ambitions to provide UK professional recognition for members: To help raise
More informationQualification Specification
CIBTAC Level 3 Certificate in Electrical Epilation CBQ13 QAN 600/3628/X Qualification Specification CIBTAC V1.1(QCF) 1 Contents Contents... 2 1. CIBTAC... 3 2. Introduction to CIBTAC qualifications...
More informationNational Certificate in Construction (Leading Hand) (Level 4)
NZQF NQ Ref 1130 Version 2 Page 1 of 5 National Certificate in Construction (Leading Hand) (Level 4) Level 4 Credits 55-65 This qualification is expiring. The last date to meet the requirements is 31 December
More informationQualification details
Qualification details Title New Zealand Diploma in Web Development and Design (Level 5) Version 1 Qualification type Diploma Level 5 Credits 120 NZSCED 020115 Information Technology > Computer Science
More information2-Day Exclusive Sale on NOW! HURRY - Ends 28th September!
2-Day Exclusive Sale on NOW! HURRY - Ends 28th September! Just imagine having the skills to confidently oversee the day to day administration needs of an office. Business administration professionals comprise
More informationin Compliance Management NSW Associate Intensive (AGRCI)
Certificate IV in Compliance Management 91516 NSW Associate Intensive (AGRCI) Overview Introduction GRCI s Certificate IV in Compliance Management 91516 NSW has been developed to provide GRC professionals
More informationCertificate III in Information, Digital Media and Technology (ICT30115)
Certificate III in Information, Digital Media and Technology (ICT30115) Real Skills for Real Careers Vocational Education and Training Summary What is a Certificate III in Information Technology all about?
More informationENGINEERING. Cycle Maintenance. Level 2 Certificate in. Qualification Specification
Level 2 Certificate in ENGINEERING Cycle Maintenance Qualification Specification Overview This unique qualification covers the intermediate knowledge and understanding of cycle maintenance. Developed in
More informationLOGISTICS AND DISTRIBUTION 3
LOGISTICS AND DISTRIBUTION 3 Occupation Description " Person 3" refers to an individual who orders, stores, inventories and distributes materials used in various fields that are stored in a warehouse concept.
More informationQualification Specification
CIBTAC Level 3 Diploma in Reiki CCQ06 QAN 600/3674/6 Qualification Specification CIBTAC V1.2(QCF) 1 Contents Contents... 2 1. CIBTAC... 3 2. Introduction to CIBTAC qualifications... 3 3 Level of the Diploma...
More informationNational Certificate in Construction (Supervisor) (Level 5)
NZQF NQ Ref 1131 Version 2 Page 1 of 6 National Certificate in Construction (Supervisor) (Level 5) Level 5 Credits 114-120 This qualification is expiring. The last date to meet the requirements is 31 December
More informationCertificate III in Information, Digital Media and Technology
Certificate III in Information, Digital Media and Technology (ICT30115) Real Skills for Real Careers Vocational Education and Training Summary What is a Certificate III in Information Technology all about?
More informationLevel 3 Diploma in Business Administration (601/3965/1)
Level 3 Diploma in Business Administration (601/3965/1) This document lists the units available in this qualification and how they compare to units in the previous version of this qualification. Units
More informationQualification Specification. Level 2 Award in Problem Solving for Practitioners In Community Safety and Crime Prevention
Qualification Specification Level 2 Award in Problem Solving for Practitioners In Community Safety and Crime Prevention ProQual 2019 Contents Page Introduction 3 Qualification structure 4 Centre requirements
More informationCertificate IV in Information Technology Support ICT40215
Certificate IV in Information Technology Support ICT40215 Real Skills for Real Careers Vocational Education and Training Summary What is a Certificate IV in Information Technology Support all about? This
More informationPlease always review the latest document available through the website
Table of Contents PURPOSE OF THE QUALIFICATION 3 WHY STUDY THE LIBF LEVEL 4 CERTIFICATE FOR DOCUMENTARY CREDIT SPECIALISTS (CDCS)? 3 OBJECTIVE 3 KEY CONTENT AREAS 3 LEARNING OUTCOMES 3 KEY SKILLS DEVELOPED
More informationCOMPLETION, WITHDRAWAL AND CERTIFICATE ISSUANCE POLICY AND PROCEDURE
COMPLETION, WITHDRAWAL AND CERTIFICATE ISSUANCE POLICY AND PROCEDURE Table of Contents 1. Overview of the certificate issuance policy and procedure 3 2. Issuance of certification control procedure 5 3.
More informationNZ Certificate in Credit Management (Level 4)
NZ Certificate in Credit Management (Level 4) The current certificate is designed for people working in, or intending to work in, a credit management role. It is designed to help develop and enhance the
More informationNational Certificate in Printing (Digital Processes for Print) (Level 3)
NZQF NQ Ref 1280 Version 3 Page 1 of 5 National Certificate in Printing (Digital Processes for Print) (Level 3) Level 3 Credits 102 This qualification is expiring. The last date to meet the requirements
More informationTHE TRUSTED NETWORK POWERING GLOBAL SUPPLY CHAINS AND THEIR COMMUNITIES APPROVED EDUCATION PROVIDER INFORMATION PACK
GAIN RECOGNITION AS AN APPROVED PROVIDER UNDER ISO/IEC 17024 AND JOIN OUR NETWORK OF TRUSTED PROVIDERS THE TRUSTED NETWORK POWERING GLOBAL SUPPLY CHAINS AND THEIR COMMUNITIES APPROVED EDUCATION PROVIDER
More informationSECURITY SYSTEMS TECHNICIAN
SECURITY SYSTEMS TECHNICIAN Occupation Description System means a person who designs, installs, repairs, maintains, replaces, tests, services the operation of all electronic security systems in accordance
More informationPARTSPERSON 2 INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education
PARTSPERSON Occupation Description " " refers to an individual who orders, warehouses, merchandises, controls inventory and dispenses repair and replacement parts for the automotive, commercial transport,
More informationNational Certificate in Border Management (Customs) (Level 3)
NZQF NQ Ref 1591 Version 1 Page 1 of 5 National Certificate in Border Management (Customs) (Level 3) Level 3 Credits 65 Purpose This certificate is an entry level qualification for people working for the
More informationNational Certificate in Business (First Line Management) (Level 4) Level 4
NZQF NQ Ref 0649 Version 7 Page 1 of 7 National Certificate in Business (First Line ) (Level 4) Level 4 Credits 45 This qualification has been reviewed. The last date to meet the requirements is 31 December
More informationNZQF NQ Ref 1220 Version 3 Page 1 of 8. This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.
NZQF NQ Ref 1220 Version 3 Page 1 of 8 National Certificate in Mechanical Engineering (Level 2) Level 2 Credits 62 This qualification has been reviewed. The last date to meet the requirements is 31 December
More informationNATIONAL CERTIFICATE in 1 of 14
NATIONAL CERTIFICATE in 1 of 14 level of qualification: 3 credit total: 70 91 Wiredrawing Strand CC C E level 1 credits: - 6 0-6 level 2 credits: 10 8 0-6 level 3 and above credits: 26 5 9 minimum totals:
More informationINSTRUMENTATION AND CONTROL TECHNICIAN (INDUSTRIAL INSTRUMENT MECHANIC)
INSTRUMENTATION AND CONTROL TECHNICIAN (INDUSTRIAL INSTRUMENT MECHANIC) Occupation Description ation and Control Technician means a person who installs, repairs, maintains, replaces, calibrates, programs
More informationV&A/Icon Conservation and Collections Care Technicians Diploma What is the V&A / Icon Conservation and Collections Care Technicians Diploma?
V&A/Icon Conservation and Collections Care Technicians Diploma Information for Candidates 1. What is the V&A / Icon Conservation and Collections Care Technicians Diploma? This level 4 V&A / Icon Conservation
More informationContinuing Professional Development Program Guidelines
Continuing Professional Development Program Guidelines Much of what is learned in obtaining a qualification in today s rapidly changing business environment can quickly become obsolete. Most would agree
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2017.
NZQF NQ Ref 0724 Version 4 Page 1 of 11 National Diploma in Tourism Conventions and Incentives (Level 5) with strands in Conference Organisation, Convention Bureaux, Incentives Planning, and Venue Sales
More informationLEARNING MANAGEMENT SYSTEM (LMS) A GUIDE FOR PARTICIPANTS
LEARNING MANAGEMENT SYSTEM (LMS) A GUIDE FOR PARTICIPANTS November 2009 CONTENTS ROLES ALLOCATED IN THE LMS...3 TERMINOLOGY IN THE LMS...5 LMS ASSUMPTIONS...6 IMPORTANT NOTES...7 PARTICIPANT LOG ON...8
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2013.
NQF Ref 0965 Version 3 Page 1 of 8 National Certificate in Furniture Making (Level 3) Level 3 Credits 104 This qualification is expiring. The last date to meet the requirements is 31 December 2013. Purpose
More informationQualification Specification. Higher Apprenticeship in Business & Professional Administration Level 4 (England)
Qualification Specification Higher Apprenticeship in Business & Professional Administration Level 4 (England) Version 3.0 (October 2017) Qualification Specification: Business Administration: Higher Apprenticeship
More informationNTIS RIO DETAILS
Queensland Department of Education and Training RIO DETAILS NTIS number 31218 Registration expiry 23 May 2010 Principal Address Unit 4, 12 Leda Boulevard, Morayfield, QLD 4506 RTO contact Katrina Gilligan
More informationTypical Training Duration 11 months
New Zealand Certificate in Business (Administration and Technology) (Level 3) This programme is ideal for learners who need to gain a good general understanding of business administration and technology.
More informationExternal Assessment Specifications Document Curriculum. NQF Qualification Title Code
External Assessment Specifications Document Curriculum NQF Qualification Title Code Level 671101000 Occupational Certificate: Electrician 4 Name E-mail Phone Logo National Assessment Artisan Quality Moderation
More informationITIL Managing Across the Lifecycle (MALC)
ITIL Managing Across the Lifecycle (MALC) Course Syllabus (v1.2) Fifalde Consulting Inc. +1-613-699-3005 ITIL is a registered trade mark of AXELOS Limited. 2017 Fifalde Consulting Inc. ITIL MANAGING ACROSS
More informationTECHNICAL NOTE RECOGNITION OF APPLIED CIVIL ENGINEERING SKILLS
TECHNICAL NOTE RECOGNITION OF APPLIED CIVIL ENGINEERING SKILLS Authors: Andrew Taylor Communications Manager InfraTrain New Zealand Limited Tel 04 494 1883 andrew@infratrain.co.nz Alister Harlow Chairman
More informationLevel 5 Award in Understanding the Management of Physical and Cyber Asset Security in the Water and Environmental Industries
Level 5 Award in Understanding the Management of Physical and Cyber Asset Security in the Water and Environmental Industries Qualification Specification ProQual 2019 Contents Page Introduction 3 Qualification
More informationNational Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand
National Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand This qualification has been reviewed and replaced by the New Zealand Certificate in Contact
More informationPrograms that Work. March 7,
Programs that Work March 7, 2017 www.workforcedqc.org @workforcedqc Panelists Jenna Leventoff, Workforce Data Quality Campaign Kermit Kaleba, National Skills Coalition David W. Ramsay, Office of Research
More informationCertificate III in Telecommunications Digital Reception Technology
ICT30410 Qualification Notes Certificate III in Telecommunications Digital Reception Technology Descriptor This qualification reflects the role of an individual in the telecommunications industry who can
More informationNational Certificate in Business (Small Business Management) Level 4
NZQF NQ Ref 0172 Version 3 Page 1 of 7 National Certificate in Business (Small Business ) Level 4 Credits 60 This qualification has been reviewed. The last date to meet the requirements is 31 December
More informationDIPLOMA OF SALON MANAGEMENT
DIPLOMA OF SALON MANAGEMENT INCORPORATING CERTIFICATE II IN SALON ASSISTANT & CERTIFICATE III IN HAIRDRESSING CRICOS CODE: 092767B, CRICOS CODE: 092619C, CRICOS CODE: 092766C AUD$32,500 94 WEEKS Course
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2011.
NZQF NQ Ref 0260 Version 7 Page 1 of 8 National Certificate in Plastics Processing Technology (Technical) (Level 1) with strands in Injection Moulding, Extrusion, Blow Moulding, Thermoforming, Blown Film
More informationNational Certificate in Outdoor Recreation (Group Leadership) (Level 3)
NZQF NQ Ref 0449 Version 6 Page 1 of 7 National Certificate in Outdoor Recreation (Group Leadership) (Level 3) Level 3 Credits 50 This qualification has been reviewed. The last date to meet the requirements
More informationQualification Specification. Suite of Internal Quality Assurance Qualifications
Qualification Specification Suite of Internal Quality Assurance Qualifications Version 5.0 (January 2018) This qualification specification covers the following qualifications: Qualification Title Gateway
More informationThis qualification is expiring. The last date to meet the requirements is 31 March 2019.
NZQF NQ Ref 0356 Version 6 Page 1 of 7 National Diploma in Construction Management (Level 6) Level 6 Credits 245 This qualification is expiring. The last date to meet the requirements is 31 March 2019.
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 0370 Version 7 Page 1 of 6 National Diploma in Business Administration (Level 5) Level 5 Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December
More informationdatasheet Certificate/Diploma in Business and Administration Main features of the qualifications Introduction Target audience
Certificate/Diploma in Business and Administration 04709 Level 4 Certificate in Business and Administration 04710 Level 4 Diploma in Business and Administration Main features of the qualifications The
More informationNational Diploma in Infrastructure Asset Management (Level 6) Level 6
NZQF NQ Ref 0761 Version 4 Page 1 of 7 National Diploma in Infrastructure Asset Management (Level 6) Level 6 Credits 151 This qualification has been reviewed. The last date to meet the requirements is
More informationENDORSED COURSE PROGRAM GUIDE TO ENDORSEMENT. Copyright Australian Institute of Project Management
ENDORSED COURSE PROGRAM GUIDE TO ENDORSEMENT Copyright Australian Institute of Project Management V13 / Approved: 11/04/2017 Table of Contents 1. WHY SHOULD I APPLY FOR ENDORSEMENT WITH AIPM?... 3 2. WHAT
More informationAPPROVED BY: Next Review Date: 31 March QCTO CERT 002/18 QCTO Certification Policy Page 2 of 14
1 April 2018 Policy for the certification of learner achievements for trades and occupational qualifications on the Occupational Qualifications Sub-Framework (OQSF) APPROVED BY: Document name: Policy for
More informationRG146 Compliance Solution FAQs Content Summary
RG146 Compliance Solution FAQs Content Summary General... 3 How do I become a financial planner?... 3 How do I become RG146 compliant?... 3 Do I have to be a member of CPA Australia to be eligible to enrol?...
More informationBS523 (with PDP) Postgraduate Diploma in Management. January 2016 January September 2017
PROGRAMME APPROVAL RECORD AND CERTIFICATE (PARC) PART 1 - GENERAL INFORMATION Programme title Award title Awarding Body/Institution Teaching Institution (if different) Language of Study UCAS Code Programme
More informationNZQF Ref 1499 Version 3 Page 1 of 14. This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF Ref 1499 Version 3 Page 1 of 14 National Diploma in Business (Level 6) Level 6 Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. Version
More informationProQual Internal Quality Assurance Qualifications
ProQual Internal Quality Assurance Qualifications Level 4 Award in the Internal Quality Assurance of Assessment Processes and Practices Level 4 Certificate in Leading the Internal Quality Assurance of
More informationMORE INFORMATION ABOUT THE NATIONAL PONY CLUB NCAS SCHEME
MORE INFORMATION ABOUT THE NATIONAL PONY CLUB NCAS SCHEME National Coaching Accreditation Scheme (NCAS) The NCAS is an initiative of the Australian Sports Commission (ASC). The NCAS is a progressive coach
More informationFurther Education and Training Certificate: Technical Support (NQF Level 4) SAQA ID: 78964
Further Education and Training Certificate: Technical Support (NQF Level 4) MICT Seta Accredited Qualification SAQA ID: 78964 1. Further Education and Training Certificate: Technical Support (NQF Level
More informationBOOM TRUCK OPERATOR FOLDING BOOM UNLIMITED TONNAGE
BOOM TRUCK OPERATOR FOLDING BOOM UNLIMITED TONNAGE Occupation Description Folding Boom Unlimited Tonnage operator means a person who operates a truck mounted folding boom crane with capacity over 22 tonnes
More informationSouth African Forestry Assurance Scheme SAFAS 6:2018. Certification and Accreditation Procedures. Issue SAFAS Council SAFAS
South African Forestry Assurance Scheme SAFAS 6:2018 Issue 1 2018-05-22 SAFAS 346 Burger Street Pietermaritzburg South Africa Tel: +27 33 897 5000 1 Document name: Document number: SAFAS 6:2018 Approved
More informationIssuing Certification Policy
Issuing Certification Policy 1. Purpose The Australian Institute of Commerce and Technology is committed to providing quality training and assessment in accordance with the Standards for Registered Training
More informationQCTO CERT 002/15 QCTO Certification Policy Page 2 of 14
1 April 2016 Policy for the certification of learner achievements for trades and occupational qualifications on the Occupational Qualifications Sub-Framework (OQSF) Document name: Policy for the certification
More informationNational Certificate in Hand Operated Fire Fighting Equipment (Level 3) Level 3
NZQF NQ Ref 0568 Version 4 Page 1 of 9 National Certificate in Hand Operated Fire Fighting Equipment (Level 3) Level 3 Credits 124 This qualification has been reviewed. The last date to meet the requirements
More informationProQual External Quality Assurance Qualifications. Level 4 Award in the External Quality Assurance of Assessment Processes and Practice
ProQual External Quality Assurance Qualifications Level 4 Award in the External Quality Assurance of Assessment Processes and Practice Level 4 Certificate in Leading the External Quality Assurance of Assessment
More informationNational Certificate in Hospitality (Introductory Cookery) (Level 2)
NZQF NQ Ref 0552 Version 6 Page 1 of 7 National Certificate in Hospitality (Introductory Cookery) (Level 2) Level 2 Credits 45 This qualification has been reviewed. The last date to meet the requirements
More informationNATIONAL CERTIFICATE in 1 of 13
NATIONAL CERTIFICATE in 1 of 13 level of qualification: 2 credit total: 76 Core Compulsory Core Elective Wiredrawing Strand level 1 credits: 20 0-8 6 level 2 or above credits 14 0-23 13 minimum totals:
More informationThe role of professional bodies in the development of innovative onshore education
The role of professional bodies in the development of innovative onshore education AIEC, Brisbane, 8 th October 2014 Asheley Jones MACS (Snr) CP Head of Education and Workforce Development ACS - The Professional
More informationQualification Manual. Level 3 Diploma in NGINEERING. Fabrication and Welding. Engineering Technology. Qualification Code: 501/1131/0. Issue 2.
Qualification Manual Level 3 Diploma in Fabrication and Welding NGINEERING Engineering Technology Qualification Code: 501/1131/0 Issue 2.0 0 Engineering and Technology Contents 1.0 About EAL 2.0 Introduction
More information