C-1. Appendix C. Index
|
|
|
- Matilda Fitzgerald
- 6 years ago
- Views:
Transcription
1 C-1 Appendix C Index
2 C-2 D.J. Toncich - Data Communications and Networking for Manufacturing Industries A ACK/NAK protocols, 187 Acknowledgement of a Command, 64,66,192 Address bus, 24, 25 Address bus / data bus differences, 29 Address bus decoding logic, 25 Addressing, Alpha-numeric characters, American National Standards Institute (ANSI), 257, 258 American Standard Code for Information Interchange (ASCII), Ampere's Law, 74 Amplitude Modulation (AM), 130 Annual production volumes against part variety, 52 Application Layer, 226, 228, 230 ASCII, Asynchronous Balanced Mode (ABM), 236 Asynchronous communications, Automated Guided Vehicles (AGVs), 52, 55 B Bandwidth, 128 Base 16 (hexadecimal) number system, 9, 11 Base 2 (Binary) number system, 4, 6, 9, 10 Base 8 (Octal) number system, 8, 9, 10 Baseband, 128, 129 Basic Mode (BSC) protocol, Baud Rate, 172 Bi-polar encoding technique, 104 Binary addition, subtraction, multiplication and division, 13 Binary Coded Decimal (BCD) system, 11, 12 Binary digit (Bit), 6 Binary number system, 9 Binary Synchronous Control, Binary to hexadecimal conversion, 11 Binary to octal conversion, 10 Bisync Protocol (BSC), Bit Error Rate (BER), 118 Bit-Oriented, 100 Block, 116 Block-Check-Sum (BCS), 116 Block-Check-Sum calculation, 117, 189, 191
3 Appendix C - Index C-3 Boeing, 270 Boole, George, 18 Boolean Algebra, Expression Simplification, 21 Laws and Postulates, 22 Break-out box, Bridges, British Standards Institute (BSI), 257, 258 Broadband, 129 Bulk program storage facilities, 49 Bus Network, , 216, 218, 220 C Cable concentrations, 218 Cable maintenance, 218 CAN Bus, Carrier Detect CD line, , 157, 158 Carrier frequency, 128, 131 Carrier Sense Multiple Access with Collision Detection (CSMA/CD), Central Processing Unit (CPU), 2, 62 Centronics Parallel Interface, Channels (forward and reverse), 133 Character-oriented, 138 Character-Oriented systems, 100 CHIP ENABLE, Circuit Switched Data Networks (CSDNs), Circular buffer, Clear to Send CTS, 145, 147, 149, 152 Clock encoding and extraction, Closed architecture controllers, 251 Co-axial cable 133 Command packet, Commité Consultatif Internationale de Telegraphie et Telephonie (CCITT), 144, 257, 258 Common Signal Ground COM (RS-232), 147 Communications protocol, Computer Aided Design system, 49 Computer Integrated Manufacture (CIM), 242 Computer Numerical Control (CNC) machine tools, Conducting cage or "shield", 77 Conducting communications link, Constant System Monitor (CSM), 55 Contention (Network), 212
4 C-4 D.J. Toncich - Data Communications and Networking for Manufacturing Industries Continuous (analogue), 4 Conversion from Human form to computer form, 6-7 Conversion of base 10 numbers to different bases, 8-13 Convolution, 112 Cost effectiveness of dedicated production systems, 54 Cross-talk, CSMA/CD, Current loop (20mA), 177 Cyclic Redundancy Checks (CRCs), 119 D Data bus, 2 Data Communications Equipment (DCE), 136 Data corruption, 50 Data frame, 108 Data Link Layer, 226, 229 Data Network, 212 Data packet, 158 Data packet assembly and disassembly, 228 Data Set Ready DSR, 145, 147 Data Signal Rate Selector DSR, 147 Data Terminal Equipment (DTE), 136,144 Data Terminal Ready DTR, 145, 147 DB25, 146 DB9, 146 Dedicated in-line transfer machine, 53 Dedicated manufacturing systems, 54 Demodulators, 133 Desktop publishing, 281 Device latency, 254 Differential communications system, 173 Differential encoding, 106 Digital circuits, 4 Digital Equipment Corporation, 266 DIN plugs, 146 Direct Numerical Control (DNC), 45 Dissection of Messages, 65 Double Side-Band Modulation (DSB), 128 Dumb terminals,
5 Appendix C - Index C-5 E EBCDIC, 14 Echoing, Electro-Magnetic Interference (EMI), 50,76 Electro-mechanical transmission, 108 Electronics Industries Association (EIA), 258 Enhanced Performance Architecture (EPA) MAP, 275 Error burst, 118 Error detection techniques, Establishment of Link (Communication Phase), 64 Ethernet system, European Computer Manufacturers Association (ECMA), 258 Even parity, 114,115,116 Expansion I/O modules (PLCs), 41 Extended Binary Coded Decimal Interchange Code, 14 F Faraday's Law, 76 File dump, 51, 208 File server networks, Filtering in the frequency domain, 125, 126 First-In First-Out (FIFO) Buffers, 185 Flexibility in production systems, 55 Flexible Manufacturing System (FMS), Flexible parts transport techniques, 55 Flexible Transfer Line (FTL), 55 FMS control, 56, 57, 58 Fourier Transform, 121, 122 Frame, 108 Frame assembly and disassembly, Frame Check Sequences (FCSs), 119 Frequency domain representation of signals, Frequency spectrum, Frequency-Shift Keying (FSK), 130, 131 Full-duplex link, 100 Fully programmable machining modules, 55
6 C-6 D.J. Toncich - Data Communications and Networking for Manufacturing Industries G G-Code, 44 Gates (Boolean logic), 20 Gateways, 263 Gender (DCE or DTE), 144, 154 General Motors, 245, 269 General Purpose Instrumentation Bus (GPIB), 87 Generator polynomial, 119 GM MAP Task Force, 269 H Half-duplex link, 100 Hand-shaking lines on communications links, 88 Hard-wire inter-locking, 47, 54 Hard-wired relay-ladder-logic control, 93 Hardware hand-shaking, 81; Hand-shaking in RS-232 links, Hewlett Packard Instrumentation Bus (HPIB), 87 High Level Data Link Control (HDLC), 235 High-current cables, 76 Host computer, 41, 45 Human to computer interface, 11 HYPOLINK, 189 I IEEE 802 committee, 258 IEEE 802.1, 258, 260 IEEE 802.2, 259, 260 IEEE 802.3, 259, 260 IEEE 802.4, 259, 260 IEEE 802.5, 259, 260 IEEE 802.6, 260 IEEE-488 "Instrumentation Bus", 87 Infinitely long parallel conductors (cross-talk), 74 Institute of Electrical and Electronic Engineers (IEEE), 258 Instruction set (CPU), 23 Integrated PLC Control, 49 Integrated Services Digital Network (ISDN), 241, 257 Intel, 266
7 Appendix C - Index C-7 Interfacing (to networks), 248, 249 Internal parallel data transfer, 87 International Standards Organisation (ISO), 226, 257 Interrupt programming, 32 Interrupts, 32, 33 Inverse Fourier Transform, 122 Issue of a Command and Command Qualifier, 64 J Jam sequence (CSMA/CD), 223 K Kaminsky, Mike, 245 Kermit" protocol, 206 Kirchoff's voltage law, 96, 121 L LAN in a multi-vendor FMS environment, 58 Large Scale Integrated (LSI) circuits, 18 Light Emitting Diodes, 134 Line-Analyser, 163 Line-drivers, Line-receivers, Link control characters (DLE,STX,ETX), 188 Link Response Time, 253 Local Area Network (LAN), 212 Logical Link Control (LLC), 259 Logical ring, 223 Logical Units (LUs), 279 LON Bus, LON Works, Lumped-parameter approximation, 69
8 C-8 D.J. Toncich - Data Communications and Networking for Manufacturing Industries M Machining modules, 53 Magnetic flux-density, 75 Manchester Encoding, 105 MAP, 245, Mapping (Memory), MARK condition, 108 Mark parity, 139 Media Access Control, Medium Scale Integrated (MSI) circuits, 18 Memory chip, Metropolitan Area Networks, 260 Microprocessor chip, 2-4 Microsoft Corporation (Windows, Windows NT), 284 Millimetre wave, 168 MMS, 271, 272 MNEMONIC, 23 Modems, 133, 144 Modulation, Mother-board, 2 Motorola Corporation (LON Works), Multi-user, multi-tasking operating systems, 207 Multiplexer (Serial Port), 213 N NAK, 188 National Bureau of Standards (NBS), 258 Network Addressable Units or NAUs, 279 Network Layer, 229 Network topologies, 216 Non Return to Zero (NRZ) encoding, 105 Non Return to Zero Inverted (NRZI), 106 Null Modem,
9 Appendix C - Index C-9 O Octal number system, 8 Odd parity, 139 Open Systems Interconnection (OSI), Optic fibre cables, 134, 135, 167 Original Equipment Manufacturer (OEM), 41 OSI Gateways, 263 OSI Networking, 260 P PABX (Serial Port), 217 Packet, 116 Packet Switched Data Networks (PSDNs), 238, 241 Paper (mylar) tape, 49 Parallel data transfer, 87, Speed advantages, 97 Parallel Exchange Network Units, 85 Parallel Network, 88 Parallel to serial conversion, 98 Parity checking, 114 PASCAL, 194 PC based ASCII word-processor, 49 Performance of a protocol, 183 Performance of Local Area Networks, Permeance, 75 Phase Encoding (PE), 105 Phase-Shift Keying (PSK), Physical Layer, 226, 229 Plug-in Compatibility, Point to point serial links, 94 Post Telephone and Telecommunications (PTT) modem, 144 Presentation Layer, 230 Profile (Network), 276 Program execution in a microprocessor, Programmable Logic Controllers (PLCs), 40 Protective Ground GND, 147 Public Data Network or PDN, 238 Public Switched Telephone Networks (PSTN), 238, 257
10 C-10 D.J. Toncich - Data Communications and Networking for Manufacturing Industries R RAM chips, 26 Random Access Memory (RAM), 4 Read Only Memory (ROM), 4 Receive Data RXD, 145, 147 Request to Send RTS, 145, 147 Resource sharing, 281 Return-to-Zero waveform (RZ), 104 Ribbon cable, 162 Ring Indicator RI, 145, 147 Ring Network, 216, 218 Robot control systems, 45 Robots (Gantry), 55 Rotary transfer machines, 54 Routers, 264 RS-232C Specification, RS-422, 173 RS-423, 175 RS-449, 175 S Selection of a networking topology, 220 Servo-drive controller, 43, 44 Session Layer, 226, 230 Shift-Registers, 98 Signal modulation, Signal Quality Detector SQD, 147 Simplex Communication, 100 Skin effect, 73 Small Scale Integrated (SSI) circuits, 18 Software protocols, 80 SPACE condition, 108 Space parity, 139 Spreadsheets, 281 Star Network, 216, 217 Star node, 217 Start and stop bit/s, 108 Strobe signal, 84 SYN, 233
11 Appendix C - Index C-11 Synchronism, 102 Synchronous and asynchronous (induction) motor, 44 Synchronous Data Link Control (SDLC), 235 Synchronous serial transmission, Synchronous/Asynchronous links - differences, 110 Systems Network Architecture (IBM) SNA, T Telegram, 116 Terminal Emulation, 206 Termination of Transmission, 65 Time domain representation, 123 Token passing scheme, 223 TOP, 269, 270, 271, 272 Total bandwidth of cables, 129 Transistor Logic (TTL) voltage levels, 83 Transmit Data TXD, 145, 147 Transparent mode, 233 Transport Layer, 226, 230 Travelling waves, 73 Truth tables, 20 TTL (Transmission Limitations), 95 TTL digital circuits, 108 Twisted-Pair Cable, 77, 165 U UART control circuits, 169 Unbalanced Normal Response Mode (NRM), 236 Universal Asynchronous Receiver Transmitter (UART), 32, Universal Synchronous Receiver Transmitter (USRT), V V.24 standard, 144 Very Large Scale Integrated (VLSI) circuits, 18, 276 Virtual Manufacturing Devices or VMDs, 272
12 C-12 D.J. Toncich - Data Communications and Networking for Manufacturing Industries W Ward Christensen Signalling, 208 Windows, Windows NT, 284 Word-processing, 208 X X.25, 240, 241 X.400 Message Handling Specification (MHS), 273 Xerox, 266 XMODEM, 208 XON/XOFF protocol, 184
Appendix A. Industrial Data Communications Dictionary. A Summary... A-1
A-1 Appendix A Industrial Data Communications Dictionary A Summary... This dictionary contains a list of words, phrases, terms and acronyms commonly associated with data communications in the manufacturing
Serial I/O. 4: Serial I/O. CET360 Microprocessor Engineering. J. Sumey
4: Serial I/O CET360 Microprocessor Engineering J. Sumey Introduction serial, i.e. bit-at-a-time, interfacing techniques are useful when parallel interfacing limitations become problematic distance limitations
Data Link Networks. Hardware Building Blocks. Nodes & Links. CS565 Data Link Networks 1
Data Link Networks Hardware Building Blocks Nodes & Links CS565 Data Link Networks 1 PROBLEM: Physically connecting Hosts 5 Issues 4 Technologies Encoding - encoding for physical medium Framing - delineation
Sender Receiver Sender
EEE 410 Microprocessors I Spring 04/05 Lecture Notes # 19 Outline of the Lecture Interfacing the Serial Port Basics of Serial Communication Asynchronous Data Communication and Data Framing RS232 and other
Come & Join Us at VUSTUDENTS.net
Come & Join Us at VUSTUDENTS.net For Assignment Solution, GDB, Online Quizzes, Helping Study material, Past Solved Papers, Solved MCQs, Current Papers, E-Books & more. Go to http://www.vustudents.net and
Serial Communication. Spring, 2018 Prof. Jungkeun Park
Serial Communication Spring, 2018 Prof. Jungkeun Park Serial Communication Serial communication Transfer of data over a single wire for each direction (send / receive) Process of sending data one bit at
DATA COMMUNICATIONS AND COMPUTER NETWORKS
DATA COMMUNICATIONS AND COMPUTER NETWORKS Second Edition PRAKASH C. GUPTA Formerly Head Department of Information Technology Maharashtra Institute of Technology Pune Delhi-110092 2014 DATA COMMUNICATIONS
Data Communications. From Basics to Broadband. Third Edition. William J. Beyda
Data Communications From Basics to Broadband Third Edition William J. Beyda University of California Extension, Berkeley Siemens Information and Communication Networks, Inc. Prentice Hall Upper Saddle
Serial Interfaces Part 1. ECE 153B Sensor & Peripheral Interface Design Winter 2016
Serial Interfaces Part 1 ECE 153B Sensor & Peripheral Interface Design Serial Interfaces Simple Serial Interfaces RS-232C (UART) Provides for point to point communications, primarily Among the simplest
Parallel-to-Serial and Serial-to-Parallel Converters
Session 1532 Parallel-to-Serial and Serial-to-Parallel Converters Max Rabiee, Ph.D., P.E. University of Cincinnati Abstract: Microprocessors (MPUs) on a computer motherboard communicate in a parallel format
CS 4453 Computer Networks Winter
CS 4453 Computer Networks Chapter 2 OSI Network Model 2015 Winter OSI model defines 7 layers Figure 1: OSI model Computer Networks R. Wei 2 The seven layers are as follows: Application Presentation Session
Input-Output Organization
Ted Borys - CSI 404 5/1/2004 Page 11-1 Section 11 Input-Output Organization ASCII Character Set 94 printable characters Upper & lowercase letters 10 numerals Special characters such as $, @, #, % 34 control
Transmission SIGNALs
Chapter 6 Digital Communications Basics 6.1 Introduction 6.2 Transmission media 6.3 Source of signal impairment 6.4 Asynchronous Transmission 6.5 Synchronous Transmission 6.6 Error Detection Methods 6.7
DCN Questions CHAPTER 1:- NETWORKING FUNDAMENTALS
DCN Questions CHAPTER 1:- NETWORKING FUNDAMENTALS Q1. What are the four fundamental Characteristics of Data Communication? On which effectiveness of data communication is depended? Q2. Define data communication?
Computer and Network Security
CIS 551 / TCOM 401 Computer and Network Security Spring 2009 Lecture 6 Announcements First project: Due: 6 Feb. 2009 at 11:59 p.m. http://www.cis.upenn.edu/~cis551/project1.html Plan for Today: Networks:
EDEXCEL NATIONAL CERTIFICATE/DIPLOMA SELECTION AND APPLICATIONS OF PROGRAMMABLE LOGIC CONTROLLERS UNIT 25 - NQF LEVEL 3
EDEXCEL NATIONAL CERTIFICATE/DIPLOMA SELECTION AND APPLICATIONS OF PROGRAMMABLE LOGIC CONTROLLERS UNIT 25 - NQF LEVEL 3 OUTCOME 4 - COMMUNICATION MEDIUM CONTENT Understand data communications media and
SAE6A/SAZ6B DATA COMMUNICATION AND NETWORKING UNIT : I To V
SAE6A/SAZ6B DATA COMMUNICATION AND NETWORKING UNIT : I To V 1 UNIT 1:Syllabus Introduction to Data Communication Network Protocols & standards standards organizations Line Configuration Topology Transmission
UNIT-V COMMUNICATION INTERFACE
UNIT-V COMMUNICATION INTERFACE SERIAL DATA TRANSFER INTRODUCTION Data transmission, digital transmission or digital communications is the physical transfer of data (a digital bit stream) over a point-to-point
8051SERIAL PORT PROGRAMMING
8051SERIAL PORT PROGRAMMING Basics of Serial Communication Computers transfer data in two ways: Parallel Often 8 or more lines (wire conductors) are used to transfer data to a device that is only a few
Select a Data Communication Interface
Printer Setup and Operation Select a Data Communication Interface Select a Data Communication Interface You may connect your print engine to a computer using one or more of the available connections. The
Data Communications & Computer Networks. Digital Data Communications Techniques
Data Communications & Computer Networks Chapter 6 Digital Data Communications Techniques Fall 2008 Agenda Preface Asynchronous & Synchronous transmission Error Detection & Correction Line configurations
TIME SCHEDULE. 2 Physical Layer 15. Course General Outcomes: Sl. G.O On completion of this course the student will be able :
COURSE TITLE : DATA COMMUNICATION COURSE CODE : 3151 COURSE CATEGORY : B PERIODS/WEEK : 4 PERIODS/SEMESTER : 60 CREDITS : 4 TIME SCHEDULE MODULE TOPICS PERIODS 1 Concepts of Data Communication 15 2 Physical
You want to learn about point to point asynchronous serial links and how to apply them in practice. You want to learn how to link RS-232C devices
143 Chapter 5 Serial Data Communications - Hardware Application A Summary... Asynchronous communications techniques. The RS-232C System. Definitions and shortcomings. How to physically link devices on
SRM ARTS AND SCIENCE COLLEGE SRM NAGAR, KATTANKULATHUR
SRM ARTS AND SCIENCE COLLEGE SRM NAGAR, KATTANKULATHUR 603203 DEPARTMENT OF COMPUTER SCIENCE & APPLICATIONS QUESTION BANK (2017-2018) Course / Branch : BCA Semester /Year : EVEN / III Subject Name : Data
KIBABII UNIVERSITY COLLEGE DEPARTMENT COMPUTER SCIENCE & IT ANSWER ALL QUESTIONS IN SECTION A AND ANY TWO QUESTIONS IN SECTION B
KIBABII UNIVERSITY COLLEGE DEPARTMENT COMPUTER SCIENCE & IT TITLE: DATACOMMUNICATION COURSE CODE: 223 SECTION A: 30 Marks ANSWER ALL QUESTIONS IN SECTION A AND ANY TWO QUESTIONS IN SECTION B TIME ALLOWED:
Serial Communication Prof. James L. Frankel Harvard University. Version of 2:30 PM 6-Oct-2015 Copyright 2015 James L. Frankel. All rights reserved.
Serial Communication Prof. James L. Frankel Harvard University Version of 2:30 PM 6-Oct-2015 Copyright 2015 James L. Frankel. All rights reserved. Overview of the Serial Protocol Simple protocol for communicating
CIS 551 / TCOM 401 Computer and Network Security. Spring 2007 Lecture 7
CIS 551 / TCOM 401 Computer and Network Security Spring 2007 Lecture 7 Announcements Reminder: Project 1 is due on Thursday. 2/1/07 CIS/TCOM 551 2 Network Architecture General blueprints that guide the
e-pg Pathshala Subject : Computer Science Paper: Embedded System Module: Serial Port Communication Module No: CS/ES/11 Quadrant 1 e-text
e-pg Pathshala Subject : Computer Science Paper: Embedded System Module: Serial Port Communication Module No: CS/ES/11 Quadrant 1 e-text In this lecture, serial port communication will be discussed in
Chapter 11: Input/Output Organisation. Lesson 05: Asynchronous RS232C Serial Port data transfer
Chapter 11: Input/Output Organisation Lesson 05: Asynchronous RS232C Serial Port data transfer Objective Understand the RS232C asynchronous data transfer and signals Learn the RS232C serial port communication
Special expressions, phrases, abbreviations and terms of Computer Networks
access access point adapter Adderssing Realm ADSL (Asymmetrical Digital Subscriber Line) algorithm amplify amplitude analog antenna application architecture ARP (Address Resolution Protocol) AS (Autonomous
Test Bank for A Guide to Designing and Implementing Local And Wide Area Networks 2nd Edition by Palmer and Sinclair
Test Bank for A Guide to Designing and Implementing Local And Wide Area Networks 2nd Edition by Palmer and Sinclair Link download full: https://testbankservice.com/download/test-bank-for-aguide-to-designing-and-implementing-local-and-wide-area-networks-2ndedition-by-palmer-and-sinclair/
4.3 Digital Communication
Data Acquisition & Computer Control 11 4.3 Digital Communication Why digital communication (often termed digital input/output, or DIO)? Because the language of computers (and many peripheral devices) is
Chapter 10: Local Area Networks
Chapter 10: Local Area Networks MULTIPLE CHOICE 1. CSMA stands for: a. Client-Server Multi-Access c. Carrier Server Master Application b. Carrier Sense Multiple Access d. none of the above 2. The CD in
Course 10: Interfaces Agenda
Course 10: Interfaces 1 Agenda Introduction V.24 interface (RS232) USB 2 Introduction 3 Definition(s) (from the web) A boundary across which two independent systems meet and act on or communicate with
Telecommunications II TEL 202 Spring, 2004
Telecommunications II TEL 202 Spring, 2004 Time: Lecture: Thursday 12:20 3:30 Lynn Campus, Room LW207 Laboratory: Thursday 4:00 5:00 Lynn Campus, Room LE201 Instructor: Scott Stimpson Office: Lynn, W228
Integrity Instruments Application Notes. Release 1
Integrity Instruments Application Notes Release 1 What is EIA/TIA/RS-485 What is EIA/TIA/RS-422 Half Duplex and Full Duplex Communication Asynchronous Communicatin Grounding EIA/TIA/RS-485/422 Shielding
CS1302 / Computer Networks
CS1302 / Computer Networks Year/Sem : III/VI UNIT I- DATA COMMUNICATIONS 1. Define Data communication 2. List out the characteristics of data communication 3. What are the components of data communication?
RS-232 DATA COMMUNICATIONS WITH THE TANDY COLOR COMPUTER
By Tom Gunnison 1998 DISCLAIMER These plans and software are provided "as is" with no guarantee of fitness for the purpose either explicit or implied. I disclaim any responsibility for losses incurred
HDLC (High level Data Link Control)
High-level Data Link Control HDLC (High level Data Link Control) Modem, EIA-232, HDLC Framing and Procedures Agenda Line Management, Modems Introduction HDLC Station Types, Modes of Operation Frame Format,
Line Protocol Basics. HDLC (High level Data Link Control) Agenda. Additional Issues
Line Protocol Basics High-level Data Link Control HDLC (High level Data Link Control), EIA-232, HDLC Framing and Procedures line protocol basics already explained serial transmission techniques bit-synchronization
1. Draw general diagram of computer showing different logical components (3)
Tutorial 1 1. Draw general diagram of computer showing different logical components (3) 2. List at least three input devices (1.5) 3. List any three output devices (1.5) 4. Fill the blank cells of the
Data Communications. Course Design Data Communications. Pre/Post Test (80 Questions/80 Points) Upon Request None No No No
Data Communications Course Design 2005-2006 Course Information Organization Division EASTERN ARIZONA COLLEGE Business Course Number CMP 205 Title Credits 3 Developed by Lecture/Lab Ratio Transfer Status
Universal Asynchronous Receiver Transmitter Communication
Universal Asynchronous Receiver Transmitter Communication 13 October 2011 Synchronous Serial Standard SPI I 2 C Asynchronous Serial Standard UART Asynchronous Resynchronization Asynchronous Data Transmission
MIKROPROCESORY PRO VÝKONOVÉ SYSTÉMY. Serial Data Transmission (Stručný přehled) České vysoké učení technické Fakulta elektrotechnická
MIKROPROCESORY PRO VÝKONOVÉ SYSTÉMY Serial Data Transmission (Stručný přehled) České vysoké učení technické Fakulta elektrotechnická Ver.1.10 J. Zděnek, 2017 Serial data transfer - principle Serial data
ii) Do the following conversions: output is. (a) (101.10) 10 = (?) 2 i) Define X-NOR gate. (b) (10101) 2 = (?) Gray (2) /030832/31034
No. of Printed Pages : 4 Roll No.... rd 3 Sem. / ECE Subject : Digital Electronics - I SECTION-A Note: Very Short Answer type questions. Attempt any 15 parts. (15x2=30) Q.1 a) Define analog signal. b)
Syllabus for Computer Science General Part I
Distribution of Questions: Part I Q1. (Compulsory: 20 marks). Any ten questions to be answered out of fifteen questions, each carrying two marks (Group A 3 questions, Group B, Group C and Group D 4 questions
Fundamentals of Networking Introduction to Networking Devices
Fundamentals of Networking Introduction to Networking Devices Kuldeep Sonar 1 NIC (Network Interface Card) A network interface provides connectivity from an end-user PC or laptop to the public network.
Review For Exam 2. Internetworking. Summary Questions. School of Business Eastern Illinois University. School of Business Eastern Illinois University
School of Business Review For Exam 2 Wednesday 10/6/2004) Abdou Illia, Fall 2004 School of Business Internetworking 3 1. Name the two most known Medium Access Control Protocols found in LANs. How they
Lecture: Communication in PLC
PROGRAMMABLE CONTROLLERS Jerzy Kasprzyk Lecture: Communication in PLC 1. Introduction CPU PADT (Programming And Debugging Tool), RS232 (RS 485) protocols (SNP, Modbus, etc.), Ethernet; LAN (Local Area
Christian Brothers High School, Lewisham. Year 12 Information Processes & Technology. Assessment Task 3: Communications Systems.
Name: Teacher: Christian Brothers High School, Lewisham Year 12 Information Processes & Technology Assessment Task 3: Communications Systems June 2001 Outcomes Assessed: H1.1, H1.2, H2.1, H3.1, H5.2. Weighting:
DATA COMMUNICATIONS AND DISTRIBUTED NETWORKS
DATA COMMUNICATIONS AND DISTRIBUTED NETWORKS UYLESS D. BLACK CONTENTS PREFACE xv 1 INTRODUCTION 1 Purpose of Data Communications Systems and Networks 1 Purpose of Data Communications Systems 2 The Components
This PDF document is a sample chapter from the book...
This PDF document is a sample chapter from the book... To order this book, print the last page of this document. Copyright 2001 Society of Manufacturing Engineers Chapter 37 Manufacturing Networks 37.1
M242 COMPUTER NETWORS AND SECURITY
M242 COMPUTER NETWORS AND SECURITY 2.1. Network Models: UNIT - II OSI MODEL AND LAN PROTOCOLS 1. Explain Network model A network is a combination of hardware and software that sends data from one location
Lecture-65 SERIAL DATA COMMMUNICATION The data bus of a microcomputer system is designed to transfer data to and from I/O device in parallel - all
Lecture-65 SERIAL DATA COMMMUNICATION The data bus of a microcomputer system is designed to transfer data to and from I/O device in parallel - all bits of a data word are transformed simultaneously. This
Links. CS125 - mylinks 1 1/22/14
Links 1 Goals of Today s Lecture Link-layer services Encoding, framing, and error detection Error correction and flow control Sharing a shared media Channel partitioning Taking turns Random access Shared
Introduction to Network Technologies & Layered Architecture BUPT/QMUL
Introduction to Network Technologies & Layered Architecture BUPT/QMUL 2015-3-5 Review What is the Internet? How does it work? When & how did it come about? Who controls it? Where is it going? 2 Agenda
Data Transport Networks
DC 8-1 DATACOMM John Abbott College JPC Data Transport Networks M. E. Kabay, PhD, CISSP Director of Education, ICSA President, JINBU Corp Copyright 1998 JINBU Corp. All rights reserved DC 8-2 Data Transport
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING B.E. ECE UNIT I DATA COMMUNICATION PART A
KINGS CS1302 / COMPUTER NETWORKS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING B.E. ECE SUB.CODE : CS1302 BRANCH / YEAR / SEM: ECE / III / VI SUB.NAME : COMPUTER NETWORKS
UNIT 2-Data Communication Concept
UNIT 2-Data Communication Concept 2. a) Define: i) Non-return to zero codes 2015 June ii) RZ Codes b) List out the difference between serial and parallel transmission. c) What are the advantages of Asynchronous
RCS/6000. Hardware. Manual
RCS/6000 Hardware Manual Document number 80-001052-6 Revision A RCS/6000 Hardware Manual Document part number 80-001052-6 Revision History Date Revision Description 4/10/01 A Initial production release
END-TERM EXAMINATION
(Please Write your Exam Roll No. immediately) END-TERM EXAMINATION DECEMBER 2006 Exam. Roll No... Exam Series code: 100919DEC06200963 Paper Code: MCA-103 Subject: Digital Electronics Time: 3 Hours Maximum
Module 3. Wide Area Networking (WAN)
Module 3 Wide Area Networking (WAN) When many nodes or LAN s are connected together in a large scale, we have a WAN. This may be world wide. Because of the separation of the nodes, the Public Data Network
Cisco Cisco Certified Network Associate (CCNA)
Cisco 200-125 Cisco Certified Network Associate (CCNA) http://killexams.com/pass4sure/exam-detail/200-125 Question: 769 Refer to exhibit: Which destination addresses will be used by Host A to send data
Configuration of Synchronous Protocols
encor! enetworks TM Version A, September 2010 2013 Encore Networks, Inc. All rights reserved. Configuration of Synchronous Protocols This chapter discusses synchronous protocols that you can configure
Local Area Networks (LANs) & Networks Inter-Connection Chapter 5
CT 1502 Planning and Design of Communication Networks Local Area Networks (LANs) & Networks Inter-Connection Chapter 5 Nada Al Dosary Aldosary.na@gmail.com http://ct1502.edublogs.org 1 Outlines Understanding
Data Communication. Introduction of Communication. Data Communication. Elements of Data Communication (Communication Model)
Data Communication Introduction of Communication The need to communicate is part of man s inherent being. Since the beginning of time the human race has communicated using different techniques and methods.
Computer Network : Lecture Notes Nepal Engineering College Compiled by: Junior Professor: Daya Ram Budhathoki Nepal Engineering college, Changunarayan
Computer Network : Lecture Notes Nepal Engineering College Compiled by: Junior Professor: Daya Ram Budhathoki Nepal Engineering college, Changunarayan Chapter3: OSI Reference Model: Network Software: Network
Appendix C. Datum Systems PSM-4900 Satellite Modem. Cabling Specifications
DATUM SYSTEMS Appendix C Datum Systems PSM-4900 Satellite Modem Cabling Specifications PSM-4900 VSAT / SCPC - Cabling Specifications Revision History Rev 1.0 6-10-2000 Preliminary Release. Rev 1.1 8-1-2000
Unit 1 Introduction to WANs and Telecommunications
Unit 1 Introduction to WANs and Telecommunications Chapters 1 from both textbooks Chapter 1: The Basics Sound, Electrical Signals, Electromagnetic Spectrum 2008 ITT Educational Services Inc. IT-320 Wan
Layer 2 functionality bridging and switching
Layer 2 functionality bridging and switching BSAD 141 Dave Novak Sources: Network+ Guide to Networks, Dean 2013 Overview Layer 2 functionality Error detection Bridges Broadcast and collision domains How
Monash University SAMPLE EXAM. Faculty Of Information Technology. Computer Facilities and Network Management
Official Use Only Monash University SAMPLE EXAM Faculty Of Information Technology EXAM CODES: TITLE OF PAPER: EXAM DURATION: READING TIME: BUS3150 Computer Facilities and Network Management 2 hours writing
USER S MANUAL. PH232Ex1. #1 RS-232 Serial Port to Ethernet, Terminal Server/Client. Doc No: PH232Ex1-UM-001 IPEX. (IP Electronix)
USER S MANUAL PH232Ex1 Doc No: PH232Ex1-UM-001 #1 RS-232 Serial Port to Ethernet, Terminal Server/Client IPEX (IP Electronix) Contents 1. INTRODUCTION... 3 2. SPECIFICATIONS... 3 3. PACKAGE CHECKLIST...
Data Link Protocols DATA LINK PROTOCOLS. Asynchronous Protocols. Types of Data Link Protocols XMODEM. Asynchronous Protocols.
Data Link Protocols DATA LINK PROTOCOLS Data Link Protocols are sets of rule and regulations used to implement data link layer. They contain rules for: Line Discipline Gursharan Singh Tatla mailme@gursharansingh.in
SRI RAMAKRISHNA INSTITUTE OF TECHNOLOGY DEPARTMENT OF INFORMATION TECHNOLOGY COMPUTER NETWORKS UNIT - II DATA LINK LAYER
SRI RAMAKRISHNA INSTITUTE OF TECHNOLOGY DEPARTMENT OF INFORMATION TECHNOLOGY COMPUTER NETWORKS UNIT - II DATA LINK LAYER 1. What are the responsibilities of data link layer? Specific responsibilities of
ACADEMIC YEAR PLANNING - F.Y.J.C. ( ) F.Y.J.C. COMPUTER SCIENCE (Theory)
ACADEMIC YEAR PLANNING - F.Y.J.C. (2015-16) F.Y.J.C. COMPUTER SCIENCE (Theory) JULY Number Systems & Binary Arithmetic : Binary number, decimal, octal, hexadecimal numbers, BCD,conversion from one number
8. I/O Buses and Interfaces
8. I/O Buses and Interfaces Section 7.5 & Chapter & 8 Some Review Remember CPU-memory-I/O architecture CPU-Memory-I/O Architecture Memory CPU I/O module I/O device CPU bus or System bus Bus interface I/O
RS-232 SERIAL INTERFACE PHOTOELECTRIC ISOLATOR
RS-232 SERIAL INTERFACE PHOTOELECTRIC ISOLATOR User Manual DA-70163 I. Summary With adoption of advanced photoelectric isolation technology, RS-232 Serial Interface Photoelectric Isolator, also named Serial
CCNA Exploration1 Chapter 7: OSI Data Link Layer
CCNA Exploration1 Chapter 7: OSI Data Link Layer LOCAL CISCO ACADEMY ELSYS TU INSTRUCTOR: STELA STEFANOVA 1 Explain the role of Data Link layer protocols in data transmission; Objectives Describe how the
Area Covered is small Area covered is large. Data transfer rate is high Data transfer rate is low
Chapter 15 Networking Concepts 1. Define networking. It is the interconnection of independent computing devices for sharing of information over shared medium. 2. What is the need for networking? / What
Lecture #25: Networks and Communications. Communication and Networks. What will we learn?
Lecture #25: Networks and Communications Communication and Networks What will we learn? How a communications system works What a network is What networks used for What network operating systems do What
Digital Logic Design Exercises. Assignment 1
Assignment 1 For Exercises 1-5, match the following numbers with their definition A Number Natural number C Integer number D Negative number E Rational number 1 A unit of an abstract mathematical system
Data Communication. Introduction
Data Communication Introduction Course Information Assistant Instructor Reza Hassanpour Faris Serdar Taşel Office: L214 Office: L205 Phone: 2331338 Phone: 2331357 Email: reza@cankaya.edu.tr Email: fst@cankaya.edu.tr
2012 Fall CS HW#7 True/False Multiple Choices
2012 Fall CS HW#7 True/False 1. True or False? Data transfer rate is the speed with which data is moved from one place on the network to another. 2. True or False? In the client/server model, a user may
Contents. Introduction to Networking. Preface...i. Introduction... xix
Contents Introduction to Networking Introduction to Networking Preface...i Key Topics...i Course Objectives...ii Pedagogical Features...ii Learning Objectives, Unit Summaries, Discussion Questions, and
NOTIFICATION (Advt No. 1/2018) Syllabus (Paper III)
NOTIFICATION (Advt No. 1/2018) Syllabus (Paper III) Post Code - 302 Area: Instrumentation COMPUTER PROGRAMMING AND APPLICATION 1. OVERVIEW OF PROGRAMMING: Steps in program development, problem identification,
COLLEGEDUNIA MCA. 3. What would be displayed, if the following program is compiled and run?
MCA 1. If a 1Gb file is to be transmitted over a 10Mbps link, how much time would it take to complete the transmission? A) 10 seconds B) 100 seconds C) 1000 seconds D) 1024 seconds 2. Which one of the
Dual Serial Shield User Manual
Dual Serial Shield User Manual PN: 2050 Berkshire Products, Inc. Phone: 770-271-0088 http://www.bkp-store.com/ Rev: 1.00 Copyright 2013 Table of Contents 1 Introduction... 2 1.1 XB compatibility... 2 2
Chapter 7: Data Link Control. CS420/520 Axel Krings Page 1
Chapter 7: Data Link Control CS420/520 Axel Krings Page 1 Data Link Control Protocols Need layer of logic above Physical to manage exchange of data over a link frame synchronization flow control error
Chapter 7: Data Link Control. Data Link Control Protocols
Chapter 7: Data Link Control CS420/520 Axel Krings Page 1 Data Link Control Protocols Need layer of logic above Physical to manage exchange of data over a link frame synchronization flow control error
MEV Limited USB232/485 INSTRUCTION MANUAL
MEV Limited USB232/485 INSTRUCTION MANUAL USB TO RS232 / RS485 SERIAL COMMUNICATIONS INTERFACE WITH ISOLATION OPTION Issue 5 LIST OF CONTENTS 1 INTRODUCTION 1 1.1 The Products Described in this Manual
RS 232 to Fibre Optic Modems ELO E240, ELO E241, ELO E242. Operation manual
RS 232 to Fibre Optic Modems ELO E240, ELO E241, ELO E242 Operation manual 1.0 Introduction...3 1.1 Use of the modem...3 2.0 Operation principles...3 3.0 Installation...3 3.1 RS-232 Interface Connection...4
WEEK 9 TCP/IP, PHYSICAL AND DATA LINK LAYERS
WEEK 9 TCP/IP, PHYSICAL AND DATA LINK LAYERS PHYSICAL LAYER Physical (hardware) layer: lowest level layer of the Internet Model. - Contains the actual network hardware cables, antennas, network interfaces
Serial Communication. Simplex Half-Duplex Duplex
1.5. I/O 135 Serial Communication Simplex Half-Duplex Duplex 136 Serial Communication Master-Slave Master Master-Multi-Slave Master Slave Slave Slave (Multi-)Master Multi-Slave Master Slave Slave Slave
Overview of Networks
CMPT765/408 08-1 Overview of Networks Qianping Gu 1 Overview of Networks This note is mainly based on Chapters 1-2 of High Performance of Communication Networks by J. Walrand and P. Pravin, 2nd ed, and
Networks. Allow number of independent stationary devices or computers to communicate directly
Networks Allow number of independent stationary devices or computers to communicate directly Provides a skeletal infrastructure for a collaborative system Networking By Prashant Mali [BSc,MSc(CS),CNA,LLB]
RAJIV GANDHI COLLEGE OF ENGINEERING AND TECHNOLOGY
RAJIV GANDHI COLLEGE OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING QUESTION BANK SUBJECT NAME: COMPUTER NETWORKS SUBJECT CODE: CST52 UNIT-I 2 MARKS 1. What is Network? 2.
AC : INFRARED COMMUNICATIONS FOR CONTROLLING A ROBOT
AC 2007-1527: INFRARED COMMUNICATIONS FOR CONTROLLING A ROBOT Ahad Nasab, Middle Tennessee State University SANTOSH KAPARTHI, Middle Tennessee State University American Society for Engineering Education,
Data Communications And Computer Network
Data Communications And Computer Network 2 CHAPTER 1 Networks INTRODUCTION A network is a set of devices (often referred to as nodes or station) connected by communication links. A node can be a computer,
Chapter 4: Network Access
4.0.1.1 Chapter 4: Network Access To support our communication, the OSI model divides the functions of a data network into layers. Each layer works with the layers above and below to transmit data. 4.0.1.2
EY-CM 721: Communication module with EIA-232 and EIA-485 interfaces, modu721
Product data sheet 3.1 97.012 EY-CM 721: Communication module with EIA-232 and EIA-485 interfaces, modu721 How energy efficiency is improved SAUTER EY-modulo 5 technology: modular, fast and universal Features