EZ-LIGHT TL50BLZ Beacon Universal AC Voltage Tower Light

Transcription

1 EZ-LIGHT TL50LZ eon Universal Voltage Tower Light Datasheet Multi- General-Purpose or udible Indicators The EZ-LIGHT TL50 eon Tower Light is a cross between the TL50 tower light and the K50 beon. This compt design is extremely intense and can even be used in areas with high levels of ambient light. Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated segments provide easy-to-see operator guidance and indication of equipment status Displays up to 5 colors Steady on, flashing, and rotating models available vailable in blk or light gray housing udible models available with standard, sealed, or omni-directional audible element ontinuous, pulsed, and stcato tones available 00 V to 0 V operation No assembly required Non-udible Models Model LED onnection Inputs TL50LZR Red TL50LZGR Green, Red TL50LZGYR Green, Yellow, Red TL50LZGYR lue, Green, Yellow, Red 5-wire PV cable TL50LZWGYR 5 White, lue, Green, Yellow, Red 6-wire PV cable 00 V to 0 V udible Models Standard udible Model LED onnection Inputs TL50LZR Red TL50LZGR Green, Red TL50LZGYR Green, Yellow, Red 5-wire PV cable TL50LZGYR lue, Green, Yellow, Red 6-wire PV cable 00 V to 0 V Sealed udible Model ontinuous Pulsed at.6 Hz Stcato LED onnection Inputs TL50LZRLS TL50LZRLS TL50LZRLS Red TL50LZGRLS TL50LZGRLS TL50LZGRLS Green, Red TL50LZGYRLS TL50LZGYRLS TL50LZGYRLS Green, Yellow, Red 5-wire PV cable TL50LZGYRLS TL50LZGYRLS TL50LZGYRLS lue, Green, Yellow, Red 6-wire PV cable 00 V to 0 V Models with blk housing are listed. For gray housing, add the suffix "" at the end of the cabled model number or before the "QP" in 50 mm (6 in) PV cable model numbers. For example, TL50LZR or TL50LZRQP. The first color listed is the bottom color, going up in successive order. Four color options are only available in audible cabled models. Five color options are only available in non-audible cabled models. To order the 50 mm (6 in) PV cable model, add the suffix "QP" to the model number. Models with a quick disconnect require a mating cordset. Original Document 69 Rev. H 9 October 07 69

2 EZ-LIGHT TL50LZ eon Universal Voltage Tower Light Omni-Directional Sealed udible Model ontinuous Pulsed at.6 Hz Stcato LED onnection Inputs TL50LZROS TL50LZROS TL50LZROS Red TL50LZGROS TL50LZGROS TL50LZGROS Green, Red TL50LZGYROS TL50LZGYROS TL50LZGYROS Green, Yellow, Red 5-wire PV cable TL50LZGYROS TL50LZGYROS TL50LZGYROS lue, Green, Yellow, Red 6-wire PV cable 00 V to 0 V Omni-Directional Sealed udible Model with Intensity djustment ontinuous Pulsed at.6 Hz Stcato LED onnection Inputs TL50LZROSI TL50LZROSI TL50LZROSI Red TL50LZGROSI TL50LZGROSI TL50LZGROSI Green, Red TL50LZGYROSI TL50LZGYROSI TL50LZGYROSI Green, Yellow, Red 5-wire PV cable TL50LZGYROSI TL50LZGYROSI TL50LZGYROSI lue, Green, Yellow, Red 6-wire PV cable 00 V to 0 V Note: See anner Engineering catalog or for additional models and complete information. Wiring Diagram -Wire 5-Wire 6-Wire Indicator Neutral 00-0V Hot Indicator Neutral 00-0V Hot Indicator Neutral 00-0V Hot / / / 5 5 5/ 6 -Wire Key: = rown = lue = lk = White -Wire Key: = = = = udible 5-Wire Key: = rown = lue = White = lk 5 = Gray 5-Wire Key: = = = = = udible 6-Wire Key: = rown = lue = White = lk 5 = Gray 6 = Red 6-Wire Key: = = = = 5 = 5 = udible - Tel: P/N 69 Rev. H

3 EZ-LIGHT TL50LZ eon Universal Voltage Tower Light Specifications Supply Voltage and urrent 00 V to 0 V ; 50 Hz or 60 Hz Indicators maximum current per LED color: 55 m at 00 V 50 m at 0 V 5 m at 0 V Standard udible larm: 0 m maximum current Sealed udible larm: 0 m maximum current Omni-Directional Sealed udible larm: 5 m maximum current Input Response Time Indicator On/Off: 500 ms (maximum) Supply Protection ircuitry Protected against transient voltages onnections -wire, 5-wire, or 6-wire m (6.5 ft) integral cable; -pin or 5-pin 50 mm (6 in) PV cable with QD, depending on model udible djustment Standard udible larm: Unscrew the cover (up to.5 turns maximum) to adjust the audible intensity. (Do not exceed.5 turns or the cover may deth during operation.) For maximum intensity, rotate the center plug 80 counterclockwise to remove it. Sealed udible larm and Omni-Directional Sealed udible larm with Intensity djustment: Rotate the front cover until the desired intensity is rehed. Omni-Directional Sealed udible larm: No adjustment. Indicators LEDs are independently selected; to 5 colors depending on model Indicator harteristics Dominant Wavelength (nm) or Temperature (T) Green 55 nm 5 Red 66 nm Yellow 590 nm 5 lue 70 nm 6 White 5000 K 56 Lumen Output (Typical at 5 ) Indicator Functions color designation followed by an LED option number, indicates the LED status. For example: TL50LZRQ or TL50LZGRQ. LED Option LED Status Rotation or Flash Rate lank Steady On Rotating 00 RPM ± 5% Flashing.6 Hz rate ± 5% udible larm Standard udible larm:.7 khz ± 500 Hz oscillation frequency; maximum intensity 9 d at m (. ft) (typical) Sealed udible larm:.9 khz ± 50 Hz oscillation frequency; maximum intensity 9 d at m (. ft) (typical) Omni-Directional Sealed udible larm:. khz ± 50 Hz oscillation frequency; maximum intensity 99 d at m (. ft) (typical) Omni-Directional Sealed udible larm with Intensity djustment:. khz ± 50 Hz oscillation frequency; maximum intensity 95 d at m (. ft) (typical) Typical Reduction in Sound Intensity with udible djustment (maximum to minimum) Standard udible: 0 d Sealed udible: 0 d Omni-Directional Sealed udible: d Operating onditions Non-udible: 0 to +50 ( 0 F to + F) Standard and Sealed udible: 0 to +50 ( F to + F) 95% at +50 maximum relative humidity (non-condensing) Vibration and Mechanical Shock ll models meet Mil Std. 0F requirements. Method 0 (vibration: 0 Hz to 60 Hz max., double amplitude 0.06 inch, maximum celeration 0G). lso meets IE requirements: 0G ms duration, half sine wave. Environmental Rating NEM/UL Type Non-udible and Sealed udible: IE IP67 Standard udible: IE IP50 ertifications Leakage urrent Immunity 500 µ pplication Note: The use of relay output PL is recommended since there is no leakage current. Solid state output PLs often have leakage current above m and, therefore, turn the light on in the off state. To countert the leakage current, a shunt resistor must be used. resistor must be applied from the neutral wire of the device to the hot wire of eh channel of the device. onstruction ases and overs: S Light Segment: Polycarbonate Required Overcurrent Protection WRNING: Electrical connections must be made by qualified personnel in cordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via urrent Limiting, lass Power Supply. Supply wiring leads < WG shall not be spliced. For additional product support, go to Supply Wiring (WG) Required Overcurrent Protection (mps) P/N 69 Rev. H - Tel:

4 EZ-LIGHT TL50LZ eon Universal Voltage Tower Light Dimensions 5x [0.7] H # of Tower Height (H) Non-udible Standard udible* Sealed udible Omni-Directional Sealed udible 5. mm (.5 in) 6. mm 5.8 in) 69. mm (6.7 in) 8. mm (7. in) M0 x.5 5 [.77] 9 [0.75].0 mm (5.6 in) 7.9 mm (6.8 in) 95.0 mm (7.7 in) 09.0 mm (8. in) 66.8 mm (6.6 in) 97.7 mm (7.8 in) 0.8 mm (8.7 in).8 mm (9. in) 9.6 mm (7.6 in).5 mm (8.8 in) 6.6 mm (9.7 in) 60.6 mm (0. in) 5 8. mm (8.6 in) /- NPSM Ø50 [.97] * Tower height (H) with top unscrewed approximately.5 mm to allow sound to escape ccessories ordsets -Pin Micro-Style ordsets Model Length Style Dimensions Pinout (Female) MQ-06 MQ-5 MQ-0.8 m (6 ft).57 m (5 ft) 9. m (0 ft) Straight Typ. /-0 UNF-8 ø.5 = rown = lue = lk = White 5-Pin Micro-Style ordsets Model Length Style Dimensions Pinout MQ m (6 ft) MQ m (5 ft) Straight Typ. 5 MQ m (0 ft) /-0 UNF-8 ø.5 = rown = lue = White = lk 5 = Gray - Tel: P/N 69 Rev. H

5 EZ-LIGHT TL50LZ eon Universal Voltage Tower Light Mounting rkets SM0 Right-angle brket with curved slot for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor -ga. stainless steel Hole center sping: to =0 Hole size: =ø 6., = 7. x 6., =ø SM0F Swivel brket with tilt and pan movement for precise adjustment Mounting hole for 0 mm sensor -ga. 0 stainless steel Easy sensor mounting to extrude rail T-slot Metric and inch size bolt available olt thread: SM0F, = /8-6 x in; SM0FM0, = M0 -.5 x 50 Hole size: = ø 0. SM0MM -ga. stainless steel brket with curved mounting slots for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor SMMS0P Flat SMMS series brket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. 00 series stainless steel 9 5 Hole center sping: = 5, to = 5. Hole size: =.6 x 7, = ø 6., = ø 0. Hole center sping: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6.5, =ø.0 SMMS0R Right-angle SMMS series brket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. (.6 mm) cold-rolled steel SM0S Swivel brket with 0 mm mounting hole for sensor lk reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included Hole center sping: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6.5, =ø.0 Hole center sping: =ø 50.8 Hole size: =ø 7.0, =ø 0.0 ll measurements are listed in millimeters [inches], unless noted otherwise. LM Sealed Right-ngle rket Model Description onstruction LM0R LM0R Direct-Mount Models: rket kit with base, 0 mm adapter, set screw, fasteners, o-rings, and gaskets lk polycarbonate Gray polycarbonate LMER LMER Pipe-Mount Models: rket kit with base, ½- pipe adapter, set screw, fasteners, o-rings, and gaskets. For use with stand-off pipe (listed and sold separately) lk polycarbonate Gray polycarbonate Elevated Mount System Model Features omponents S-M0TE - lk cetal Streamlined blk etal or white UHMW stand-off pipe adapter/cover onnects between 0 mm light base and ½ in. NPSM/ S-M0TE - White UHMW DN5 pipe Mounting hardware included P/N 69 Rev. H - Tel:

6 EZ-LIGHT TL50LZ eon Universal Voltage Tower Light Model Features omponents Polished 0 Stainless Steel lk nodized luminum lear nodized luminum SOP-E-50SS 50 mm (6 in) long SOP-E-00SS 00 mm ( in) long SOP-E mm (6 in) long SOP-E mm ( in) long SOP-E mm (6 in) long SOP-E mm ( in) long Elevated-use stand-off pipe (½ in. NPSM/DN5) Polished 0 stainless steel, blk anodized aluminum, or clear anodized aluminum surfe ½ in. NPT thread at both ends ompatible with most industrial environments SOP-E-900SS 900 mm (6 in) long SOP-E mm (6 in) long SOP-E mm (6 in) long S-EM0 - lk cetal Streamlined blk etal or white UHMW mounting base adapter/cover onnects between ½ in. NPSM/DN5 pipe and 0 mm S-EM0 - White UHMW (-/6 in) drilled hole Mounting hardware included Pipe Mounting Flange Pipe Mounting Flange Model Features onstruction S-F For use elevated stand-off pipes (½ in, NPSM/DN5) M5 mounting hardware and nitrile gasket included Die-cast zinc base with blk paint /- NPSM 0 x ø5.5 ø8 ø70 5 anner Engineering orp. Limited Warranty anner Engineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering orp. will repair or reple, free of charge, any product of its manufture which, at the time it is returned to the ftory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), ND WHETHER RISING UNDER OURSE OF PERFORMNE, OURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering orp., replement. IN NO EVENT SHLL NNER ENGINEERING ORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR OSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INIDENTL, ONSEQUENTIL OR SPEIL DMGES RESULTING FROM NY PRODUT DEFET OR FROM THE USE OR INILITY TO USE THE PRODUT, WHETHER RISING IN ONTRT OR WRRNTY, STTUTE, TORT, STRIT LIILITY, NEGLIGENE, OR OTHERWISE. anner Engineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manuftured by anner Engineering orp. ny misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. ny modifications to this product without prior express approval by anner Engineering orp will void the product warranties. ll specifications published in this document are subject to change; anner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: anner Engineering orp. ll rights reserved