EZ-LIGHT TL50C Compact Tower Light

Transcription

1 Datasheet Multi- General-Purpose or udible s right, uniform lighted segments at only half the height of the standard TL0 models Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated segments provide easy-to-see operator guidance and indication of equipment status Up to 7 stacked colors available vailable in black or light gray housing udible models available with standard, sealed, or omni-directional audible element ompact devices are completely self-contained, no controller needed V dc to 0 V dc or V ac operation No assembly required Models Non-udible Models # of LED s LED s onnection TL0RQ Red TL0GRQ Green, Red -pin M/Euro-Style TL0GYRQ Green, Yellow, Red TL0GYRQ lue, Green, Yellow, Red -pin M/Euro-Style TL0WGYRQ White, lue, Green, Yellow, Red 8-pin M/Euro-Style Standard udible Models # of LED s LED s onnection TL0RQ Red TL0GRQ Green, Red -pin M/Euro-Style TL0GYRQ Green, Yellow, Red -pin M/Euro-Style TL0GYRQ lue, Green, Yellow, Red TL0WGYRQ White, lue, Green, Yellow, Red 8-pin M/Euro-Style Sealed udible Models ontinuous Pulsed at.6 Hz Staccato # of LED s LED s onnection TL0RLSQ TL0RLSQ TL0RLSQ Red TL0GRLSQ TL0GRLSQ TL0GRLSQ Green, Red TL0GYRLSQ TL0GYRLSQ TL0GYRLSQ Green, Yellow, Red TL0GYRLSQ TL0GYRLSQ TL0GYRLSQ lue, Green, Yellow, Red TL0WGYRLSQ TL0WGYRLSQ TL0WGYRLSQ White, lue, Green, Yellow, Red -pin M/Euro-Style -pin M/Euro-Style 8-pin M/Euro-Style Models with black housing are listed. For gray housing, add the suffix "" at the end of the cabled model number or before the "Q" in quick disconnect model numbers. For example, TL0R or TL0RQ. ll models have imodal (NPN or PNP) inputs. The first color listed is the bottom color, going up in successive order. vailable colors include: Green (G), Red (R), Yellow (Y), lue (), Orange (O), White (W), Turquoise (T), Violet (V), Magenta (M) and Sky lue (S). ontact anner Engineering for other colors and color combinations. To order the 0 mm (6 in) PV cable model with a M/Euro-style quick disconnect, replace the suffix "Q" with "QP" in the model number. For example, TL0RQP. To order the m (6. ft) PV cable model, omit the suffix "Q" in the model number. For example, TL0R. Models with a quick disconnect require a mating cordset. Original Document 7986 Rev. F 0 ugust

2 Omni-Directional Sealed udible Models ontinuous Pulsed at.6 Hz Staccato # of LED s LED s onnection TL0ROSQ TL0ROSQ TL0ROSQ Red TL0GROSQ TL0GROSQ TL0GROSQ Green, Red TL0GYROSQ TL0GYROSQ TL0GYROSQ Green, Yellow, Red TL0GYROSQ TL0GYROSQ TL0GYROSQ lue, Green, Yellow, Red TL0WGYROSQ TL0WGYROSQ TL0WGYROSQ White, lue, Green, Yellow, Red -pin M/Euro-Style -pin M/Euro-Style 8-pin M/Euro-Style Omni-Directional Sealed udible Models with Intensity djustment # of LED s LED s onnection ontinuous Pulsed at.6 Hz Staccato TL0ROSIQ TL0ROSIQ TL0ROSIQ Red TL0GROSIQ TL0GROSIQ TL0GROSIQ Green, Red TL0GYROSIQ TL0GYROSIQ TL0GYROSIQ Green, Yellow, Red TL0GYROSIQ TL0GYROSIQ TL0GYROSIQ lue, Green, Yellow, Red TL0WGYROSIQ TL0WGYROSIQ TL0WGYROSIQ White, lue, Green, Yellow, Red -pin M/Euro-Style -pin M/Euro-Style 8-pin M/Euro-Style Wiring Diagram -Pin Models Models with to segments PNP Input NPN Input Key: -0V dc V ac -0V dc V ac = rown = White = lue = lack = = = = udible / / / / Pins and could activate the corresponding color or the audible function, if available. Wiring Diagram -Pin Models Models with segments PNP Input NPN Input Key: -0V dc V ac -0V dc V ac = rown = White = lue = lack = Gray = = = = = udible / / Pin could activate the corresponding color or the audible function, if available. - Tel: P/N 7986 Rev. F

3 Wiring Diagram 8-Pin Models Models with to 7 segments 7 6 PNP Input -0V dc V ac 7 6 NPN Input -0V dc V ac Key: = White = rown = Green = Yellow = Gray 6 = Pink 7 = lue 8 = Red = = = = = 6 = 6 7 = 7 = udible 6/ 8 6/ 8 7/ 7/ Pins and 8 can activate the corresponding color or the audible function, if available. Specifications Supply Voltage and urrent V dc to 0 V dc; or V ac (± V) at 0 Hz to 60 Hz s maximum current per LED color: m at V dc m at 0 V dc 60 m at V ac Standard udible larm: m maximum current Sealed udible larm: m maximum current Omni-Directional Sealed udible larm: m maximum current udible larm Standard udible larm:.7 khz ± 00 Hz oscillation frequency; maximum intensity 9 d at m (.ft) (typical) Sealed udible larm:.9 khz ± 0 Hz oscillation frequency; maximum intensity 9 d at m (. ft) (typical) Omni-Directional Sealed udible larm:. khz ± 0 Hz oscillation frequency; maximum intensity 99 d at m (. ft) (typical) Omni-Directional Sealed udible larm with Intensity djustment:. khz ± 0 Hz oscillation frequency; maximum intensity 9 d at m (. ft) (typical) udible djustment Standard udible larm: Unscrew the cover (up to. turns maximum) to adjust the audible intensity. (Do not exceed. turns or the cover may detach during operation.) For maximum intensity, rotate the center plug 80 counterclockwise to remove it. Sealed udible larm and Omni-Directional Sealed udible larm with Intensity djustment: Rotate the front cover until the desired intensity is reached. Typical Reduction in Sound Intensity with udible djustment (maximum to minimum) Standard udible: 0 d Sealed udible: 0 d Omni-Directional Sealed udible: d Supply Protection ircuitry Protected against transient voltages onnections Integral -pin, -pin, or 8-pin M/Euro-style QD, 0 mm (6 in) PV cable with QD, or m (6. ft) integral cable, depending on model s LEDs are independently selected; to 7 colors depending on model Input Response Time On/Off: 0 ms (maximum) haracteristics Dominant Wavelength (nm) or Temperature (T) oordinates Green 8 nm 7.0 Red 6 nm 9.0 Yellow 90 nm 6.0 lue 70 nm. Orange 608 nm 8. White 6000 K.0 Turquoise Violet Magenta Sky lue x y Lumen Output (Typical at ) Refer to IE 9 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. P/N 7986 Rev. F - Tel:

4 Vibration and Mechanical Shock ll models meet Mil Std. 0F requirements. Method 0 (vibration: 0 Hz to 60 Hz max., double amplitude 0.06 inch, maximum acceleration 0G). lso meets IE 97-- requirements: 0G ms duration, half sine wave. Operating onditions Non-udible: 0 to +0 ( 0 F to + F) Standard and Sealed udible: 0 to +0 ( F to + F) 9% at +0 maximum relative humidity (non-condensing) onstruction ases and overs: S Light Segment: Polycarbonate Environmental Rating NEM/UL Type Non-udible and Sealed udible: IE IP67 Standard udible: IE IP0 ertifications Required Overcurrent Protection WRNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via urrent Limiting, lass Power Supply. Supply wiring leads < WG shall not be spliced. For additional product support, go to Supply Wiring (WG) Required Overcurrent Protection (mps) Dimensions # of s Tower Height (H) Non-udible Standard udible* Sealed udible Omni-Directional Sealed udible [0.7] H 6. mm (.8 in) 77. mm (. in) 00. mm (.0 in). mm (.8 in) 7.0 mm (.8 in) 0.9 mm (. in) 6.0 mm (.0 in) 0.0 mm (. in) 97.8 mm (.8 in) 8.7 mm (. in).8 mm (6.0 in) 6.8 mm (6. in).6 mm (.9 in). mm (6. in) 77.6 mm (7.0 in) 9.6 mm (7. in) 9. mm (.9 in) 80. mm (7. in) 0. mm (8.0 in) 7. mm (8.6 in) 6 7. mm (6.9 in) 06. mm (8. in) 9. mm (9.0 in). mm (9.8 in) M0 x. M x [.77] 9 [0.7] 8. [0.] mm (7.9 in) *Tower height (H) with top unscrewed approximately. mm to allow sound to escape ccessories ordsets -Pin Threaded M/Euro-Style ordsets Model Length Style Dimensions Pinout (Female) MQD-06.8 m (6 ft) MQD- MQD-0.7 m ( ft) 9. m (0 ft) Straight Typ. MQD-0. m (0 ft) M x ø. = rown = White = lue = lack - Tel: P/N 7986 Rev. F

5 -Pin Threaded M/Euro-Style ordsets Single Ended Model Length Style Dimensions Pinout (Female) MQD-0. MQD-06 MQD- MQD m (. ft).8 m (6 ft).7 m ( ft) 9. m (0 ft) Straight Typ. M x ø. MQD-06R MQD-R MQD-0R.8 m (6 ft).7 m ( ft) 9. m (0 ft) Right-ngle M x ø. [0.7"] Typ. [.6"] 0 Typ. [.8"] = rown = White = lue = lack = Gray 8-Pin Threaded M/Euro-Style ordsets with Open-Shield Model Length Style Dimensions Pinout (Female) MQDS-806 MQDS-8.8 m (6 ft).7 m ( ft) Typ. MQDS-80 MQDS m (0 ft). m (0 ft) Straight M x ø MQDS-806R.8 m (6 ft) MQDS-8R MQDS-80R MQDS-80R.7 m ( ft) 9. m (0 ft). m (0 ft) Right-ngle M x ø. [0.7"] Typ. [.6"] 0 Typ. [.8"] = White = rown = Green = Yellow = Gray 6 = Pink 7 = lue 8 = Red Mounting rackets SM0 Right-angle bracket with curved slot for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor -ga. stainless steel Hole center spacing: to =0 Hole size: =ø 6., = 7. x 6., =ø SM0F Swivel bracket with tilt and pan movement for precise adjustment Mounting hole for 0 mm sensor -ga. 0 stainless steel Easy sensor mounting to extrude rail T-slot Metric and inch size bolt available olt thread: SM0F, = /8-6 x in; SM0FM0, = M0 -. x 0 Hole size: = ø 0. P/N 7986 Rev. F - Tel:

6 SM0MM -ga. stainless steel bracket with curved mounting slots for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor SMMS0P Flat SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. 00 series stainless steel 9 Hole center spacing: =, to =. Hole size: =.6 x 7, = ø 6., = ø 0. Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6., =ø.0 SMMS0R Right-angle SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. (.6 mm) cold-rolled steel 8 SM0S Swivel bracket with 0 mm mounting hole for sensor lack reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6., =ø.0 Hole center spacing: =ø 0.8 Hole size: =ø 7.0, =ø 0.0 ll measurements are listed in millimeters [inches], unless noted otherwise. LM Sealed Right-ngle racket Model Description onstruction LM0R LM0R Direct-Mount Models: racket kit with base, 0 mm adapter, set screw, fasteners, o-rings, and gaskets lack polycarbonate Gray polycarbonate LMER LMER Pipe-Mount Models: racket kit with base, ½- pipe adapter, set screw, fasteners, o-rings, and gaskets. For use with stand-off pipe (listed and sold separately) lack polycarbonate Gray polycarbonate Elevated Mount System Model Features omponents S-M0TE - lack cetal Streamlined black acetal or white UHMW stand-off pipe adapter/cover onnects between 0 mm light base and ½ in. NPSM/ S-M0TE - White UHMW DN pipe Mounting hardware included Polished 0 Stainless Steel lack nodized luminum lear nodized luminum SOP-E-0SS 0 mm (6 in) long SOP-E-00SS 00 mm ( in) long SOP-E-0 0 mm (6 in) long SOP-E mm ( in) long SOP-E-0 0 mm (6 in) long SOP-E mm ( in) long Elevated-use stand-off pipe (½ in. NPSM/DN) Polished 0 stainless steel, black anodized aluminum, or clear anodized aluminum surface ½ in. NPT thread at both ends ompatible with most industrial environments SOP-E-900SS 900 mm (6 in) long SOP-E mm (6 in) long SOP-E mm (6 in) long S-EM0 - lack cetal Streamlined black acetal or white UHMW mounting base adapter/cover onnects between ½ in. NPSM/DN pipe and 0 mm S-EM0 - White UHMW (-/6 in) drilled hole Mounting hardware included Tel: P/N 7986 Rev. F

7 Pipe Mounting Flange Pipe Mounting Flange Model Features onstruction S-F For use elevated stand-off pipes (½ in, NPSM/DN) M mounting hardware and nitrile gasket included Die-cast zinc base with black paint /- NPSM 0 x ø. ø8 ø70 anner Engineering orp. Limited Warranty anner Engineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering orp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), ND WHETHER RISING UNDER OURSE OF PERFORMNE, OURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering orp., replacement. IN NO EVENT SHLL NNER ENGINEERING ORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR OSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INIDENTL, ONSEQUENTIL OR SPEIL DMGES RESULTING FROM NY PRODUT DEFET OR FROM THE USE OR INILITY TO USE THE PRODUT, WHETHER RISING IN ONTRT OR WRRNTY, STTUTE, TORT, STRIT LIILITY, NEGLIGENE, OR OTHERWISE. anner Engineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by anner Engineering orp. ny misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. ny modifications to this product without prior express approval by anner Engineering orp will void the product warranties. ll specifications published in this document are subject to change; anner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: anner Engineering orp. ll rights reserved