S18-2 Plastic Barrel-Mount Sensors

Transcription

1 PHOTOLTR FTURD RTGL RGHT GL BRRL 8-2 Plastic Barrel-Mount ensors self-contained powerful sensor with bright visible red emitter beam for easy alignment and set-up. vailable in multiple operating modes Wide operating range from -4 to +7 High performance sensing Beam inhibit or gain adjustment on select models ordsets and brackets see page 2 Opposed 8-2, -3 V D Visible Red LD ensing Mode Range* djustment onnection Models P Models PP OPPOD 25 m 2 m 8-2L-2M mitter 4-pin uro QD 8-2L-Q8 mitter Beam nhibit 2 m 8-2J-2M mitter Beam nhibit 4-pin uro QD 8-2J-Q8 mitter ntensity adjust 2 m 8-2-2M mitter ntensity adjust 4-pin uro QD 8-2-Q8 mitter 2 m 8-2VRL-2M 8-2VPRL-2M 4-pin uro QD 8-2VRL-Q8 8-2VPRL-Q8 ensitivity adjust 2 m 8-2VR-2M 8-2VPR-2M ensitivity adjust 4-pin uro QD 8-2VR-Q8 8-2VPR-Q8 Polar Retro 8-2, -3 V D Visible Red LD ensing Mode Range* onnection Models P Models PP P POLR RTRO 6 m 2 m 8-2VLP-2M 8-2VPLP-2M 4-pin uro QD 8-2VLP-Q8 8-2VPLP-Q8 ensitivity adjust 2 m 8-2VLP-2M 8-2VPLP-2M ensitivity adjust 4-pin uro QD 8-2VLP-Q8 8-2VPLP-Q8 For more specifications see page 2. onnection options: model with a QD requires a mating cordset (see page 2). For 9 m cable, add suffix 9M to the 2 m model number (example, 8-2L-9M). For a 4-pin uro M2 pigtail QD, add suffix Q5 to the model number (example, 8-2VRL-Q5) For a 4-pin Pico M8 pigtail QD, add suffix Q3 to the model number (example, 8-2VRL-Q3) * Range specified with BRT-84 reflector 94

2 LOT & R MTUR FBR OPT Retro 8-2, -3 V D ensing Mode Range* nput onnection Models P Models PP Visible Red LD RTRO 7.5 m ensitivity adjust 2 m 8-2VLV-2M 8-2VPLV-2M ensitivity adjust 4-pin uro QD 8-2VLV-Q 8-2VPLV-Q8 Diffuse 8-2, -3 V D ensing Mode Range* onnection Models P Models PP Visible Red LD DFFU 75 mm 2 m 8-2VDL-2M 8-2VPDL-2M 4-pin uro QD 8-2VDL-Q8 8-2VPDL-Q8 For more specifications see page 2. onnection options: model with a QD requires a mating cordset (see page 2). For 9 m cable, add suffix 9M to the 2 m model number (example, 8-2L-9M). For a 4-pin uro M2 pigtail QD, add suffix Q5 to the model number (example, 8-2VRL-Q5) For a 4-pin Pico M8 pigtail QD, add suffix Q3 to the model number (example, 8-2VRL-Q3) * Range specified with BRT-84 reflector More information online at bannerengineering.com 95

3 PHOTOLTR FTURD RTGL RGHT GL BRRL ordsets uro QD (for Q models) ee page 96 Threaded 4-Pin Length traight Right-ngle Length Micro QD (for Q models) ee page 99 Threaded 4-Pin traight Right-ngle.83 m MQD-46 MQD-46R 4.57 m MQD-45 MQD-45R 9.4 m MQD-43 MQD-43R.83 m MQ-46 MQ-46R 4.57 m MQ-45 MQ-45R 9.4 m MQ-43 MQ-43R dditional cordset information available. ee page 92. Brackets M8 & 8 ee page 864 ee page 864 ee page 866 ee page 868 MB8F.. MB8 MB38 MBM8P Other ccessories Reflectors pertures ee page 932 ee page 958 dditional brackets and information available. ee page mm 58.8 mm 85. mm ø 8. mm ø 8. mm ø 8. mm 8-2 dc Polarized Retroreflective and Fixed-Field Models uffix LP and FF 8 dc Opposed, on-polarized Retroreflective and ls uffix, R, L and D 8 ac Opposed, Retroreflective, Polarized Retroreflective, Diffuse and Fixed-Field Models uffix, R, L, LP, D and FF 59. mm 2 ø 8. mm M8 Opposed, on-polarized Retroreflective and ls uffix, R, L, D and DL

4 LOT & R MTUR FBR OPT 8-2 and 8 D pecifications upply Voltage and urrent upply Protection ircuitry 8: to 3 V dc (% max. ripple); upply current (exclusive of load current): 8-2: to 3 V dc 55 ; to 24 V dc > 55 (% max. ripple); upply current (exclusive of load current): 8-2: Opposed mitters: 7 m 8: Opposed mitters: 25 m Opposed Receivers: 8 m Opposed Receivers: 2 m Polarized Retroreflective: 6 m Polarized Retroreflective: 3 m Diffuse: 6 m on-polarized Retroreflective: 25 m Fixed-Field: 35 m Diffuse: 25 m Protected against reverse polarity and transient voltages Output onfiguration Output Rating Output Protection ircuitry Output Response Time Delay at Power-up olid-state complementary dc switch; P (current sinking) or PP (current sourcing), depending on model 8: The Dark Operate (DO) output may be wired as a normally open marginal signal alarm output, depending upon hookup to the power supply 8: 5 m max. (each) in standard hookup. When wired for alarm output, the total load may not exceed 5 m 8-2: Less than or equal to m total current through both outputs at less than or at 55 Less than or equal to 5 m total current for ambient temperatures greater than 55 OFF-state leakage current: 8-2: less than 5 µ at 3 V dc 8: less than µ at 3 V dc O-state saturation voltage: 8-2: less than.5 V at m dc; less than 2.75 V at m dc 8: less than V at m dc; less than.5 V at 5 m dc Protected against false pulse on power-up and continuous overload or short circuit of outputs 8-2: Opposed:.5 milliseconds O,. milliseconds OFF Retro, Polarized Retroreflective and Diffuse:.5 milliseconds O,.75 milliseconds OFF 8: Opposed: 3 milliseconds O,.5 milliseconds OFF Polarized Retroreflective, on-polarized Retroreflective, Fixed-Field and Diffuse: 3 milliseconds O/OFF milliseconds; outputs are non-conducting during this time Repeatability 8-2: Opposed: 7 microseconds Polarized Retroreflective and Diffuse: microseconds 8: Opposed: 375 microseconds Polarized Retroreflective, on-polarized Retroreflective, Fixed-Field and Diffuse: 75 microseconds. Repeatability and response are independent of signal strength. djustments Diffuse (DL), mitter (), Receiver (R), Polarized Retroreflective (LP), Retroreflective (LV) models: ingle turn sensitivity (gain) adjustment potentiometer mitter Beam nhibit (J) models: Tie black wire to to 3 V dc for beam inhibit ndicators 8-2: Three LD s: Green: Power is O Green Flashing: Marginal sensing signal Yellow: Pin 4 (black wire) output conducting 8: Two LDs: Green: Power is O Green Flashing: Output overloaded Yellow: Light Operate (LO) output is energized onstruction 8-2 models: B housing 8 models: thermoplastic polyester housing Lenses are polycarbonate or acrylic; 8 models come with two jam nuts nvironmental Rating 8-2: 6529 P67 8: Leakproof design rated M 6P, P67. QD models rated P69K per D onnections 2 m or 9 m attached cable, or 4-pin uro-style quick-disconnect fitting. QD cordsets are ordered separately. ee page 2. Operating onditions Temperature: -4 to +7 Relative humidity: 8: 9% at 5 (non-condensing) 8-2: 5 (non-condensing) Vibration and Mechanical hock ertifications ll models meet Mil. td. 22F requirements. Method 2 (Vibration; frequency to 6 Hz, max., double amplitude.6-inch acceleration G). Method 23B conditions H& (hock: 75G with unit operating; G for non-operation) 8-2, 8 models: 8 models: OLB chemical compatibility pending on some models; contact Banner ngineering for details More information online at bannerengineering.com 2

5 PHOTOLTR FTURD RTGL RGHT GL BRRL 8 pecifications upply Voltage and urrent upply Protection ircuitry Output onfiguration Output Rating Output Protection ircuitry Output Response Time 2 to 25 V ac (5/6 Hz). verage current: 2 m. Peak current: 2 m at 2 V ac, 5 m at 2 V ac, 75 m at 25 V ac Protected against transient voltages olid-state ac switch; three-wire hookup; Light Operate (LO) or Dark Operate (DO), depending on model Light Operate: Output conducts when the sensor sees its own (or the emitter s) modulated light Dark Operate: Output conducts when sensor sees dark 3 m max. (continuous) Fixed-Field: derate 5 m/ above +5 nrush capability: amp for 2 milliseconds, non-repetitive OFF-state leakage current: less than µ O-state voltage drop: 3 V at 3 m ac; 2 V at 5 m ac Protected against false pulse on power-up Opposed: 6 milliseconds O, 8 milliseconds OFF Polarized Retroreflective, on-polarized Retroreflective, Fixed-Field and Diffuse: 6 milliseconds O/OFF Delay at Power-up milliseconds Repeatability Opposed: 2 milliseconds Polarized Retroreflective, on-polarized Retroreflective, Fixed-Field and Diffuse: 4 milliseconds Repeatability and response are independent of signal strength. ndicators Two LDs: Green: Power O Yellow: Light sensed Yellow Flashing: Marginal excess gain onstruction Housings are thermoplastic polyester. Lenses are polycarbonate or acrylic; two jam nuts included. nvironmental Rating Leakproof design rated M 6P, P67. QD models rated P69K per D onnections 2 m or 9 m attached cable, or 4-pin Micro-style quick-disconnect fitting. QD cordsets are ordered separately. ee page 2. Operating onditions Temperature: -4 to +7 Relative humidity: 9% at 5 (non-condensing) Vibration and Mechanical hock ll models meet Mil. td. 22F requirements. Method 2 (Vibration; frequency to 6 Hz, max, double amplitude.6-inch acceleration G). Method 23B conditions H& (hock: 75G with unit operating; G for non-operation) ertifications OLB chemical compatibility pending on some models; contact Banner ngineering for details 22

6 LOT & R MTUR FBR OPT M8 D pecifications upply Voltage and urrent to 3 V dc (% max. ripple); upply current (exclusive of load current): Opposed mitters: 25 m Opposed Receivers: 2 m Polarized Retroreflective: 3 m on-polarized Retroreflective: 25 m Fixed-Field: 35 m Diffuse: 25 m upply Protection ircuitry Protected against reverse polarity and transient voltages Output onfiguration Output Rating Output Protection ircuitry Output Response Time Delay at Power-up olid-state complementary dc switch; P (current sinking) or PP (current sourcing), depending on model The Dark Operate (DO) output may be wired as a normally open marginal signal alarm output, depending upon hookup to the power supply 5 m max. (each) in standard hookup. When wired for alarm output, the total load may not exceed 5 m OFF-state leakage current: less than µ at 3 V dc O-state saturation voltage: less than V at m dc; less than.5 V at 5 m dc Protected against false pulse on power-up and continuous overload or short circuit of outputs Opposed: 3 milliseconds O,.5 milliseconds OFF Polarized Retroreflective, on-polarized Retroreflective, Fixed-Field and Diffuse: 3 milliseconds O/OFF milliseconds; outputs are non-conducting during this time Repeatability Opposed: 375 microseconds Polarized Retroreflective, on-polarized Retroreflective, Fixed-Field and Diffuse: 75 microseconds. Repeatability and response are independent of signal strength. ndicators Two LDs: Green: Power is O Yellow: Light Operate (LO) output is energized Green Flashing Output overloaded Yellow Flashing: Marginal excess gain onstruction tainless steel housing Lenses are polycarbonate or acrylic; come with two jam nuts nvironmental Rating Leakproof design rated M 6P, P67. QD models rated P69K per D onnections 2 m or 9 m attached cable, or 4-pin uro-style quick-disconnect fitting. QD cordsets are ordered separately. ee page 2. Operating onditions Temperature: -4 to +7 Relative humidity: 9% at 5 (non-condensing) Vibration and Mechanical hock ertifications ll models meet Mil. td. 22F requirements. Method 2 (Vibration; frequency to 6 Hz, max., double amplitude.6-inch acceleration G). Method 23B conditions H& (hock: 75G with unit operating; G for non-operation) M8 models: More information online at bannerengineering.com 23

7 PHOTOLTR FTURD RTGL RGHT GL BRRL xcess Gain urves (Diffuse and Fixed-Field mode performance based on 9% reflectance white test card ) = nfrared LD P = Visible Red LD Polarized Opposed Mode Retroreflective Mode Polarized Retroreflective Mode eries Opposed Mode eries on-polarized Retro with BRT-3 Reflector eries Polarized Retro with BRT-3 Reflector eries hort Range Maximum Gain. m (.33') m m (3.3') (33') DT m (33'). m (.33'). m m (.33') (3.3') DT m (33'). m (.33'). m m (.33') (3.3') DT m (33') mm (.4") Minimum Gain mm mm (.4") (4") DT mm (4") Range: 2 m LD: Range: 2 m LD: Range: 2 m LD: P Range: mm LD: Fixed-Field Mode Maximum Gain eries Long Range eries Fixed-field mode with 25 mm far limit cutoff Ø mm spot 8 mm focus Ø mm spot 25 mm cutoff mm (.4") Minimum Gain mm mm (.4") (4") DT mm (4"). mm (.4") mm mm (.4") (.4") DT mm (4") Using 8% gray test card: utoff distance will be 95% of value shown. Using 6% black test card: utoff distance will be 9% of value shown. Range: 3mm LD: utoff: 25 mm LD: Fixed-Field Mode Fixed-Field Mode eries Fixed-field mode with 5 mm far limit cutoff Ø mm spot mm focus Ø mm spot 5 mm cutoff eries Fixed-field mode with mm far limit cutoff Ø mm spot 2 mm focus Ø mm spot mm cutoff. mm (.4") mm mm (.4") (.4") DT mm (4") Using 8% gray test card: utoff distance will be 9% of value shown. Using 6% black test card: utoff distance will be 85% of value shown.. mm (.4") mm mm (.4") (.4") DT mm (4") Using 8% gray test card: utoff distance will be 85% of value shown. Using 6% black test card: utoff distance will be 75% of value shown. utoff: 5 mm LD: utoff: mm LD: 24

8 LOT & R MTUR FBR OPT Beam Patterns (Diffuse mode performance based on 9% reflectance white test card) = nfrared LD P = Visible Red LD Polarized Opposed Mode Retroreflective Mode Polarized Retroreflective Mode ffective Beam: 3 mm 5 mm mm 8 eries Opposed Mode 6" 4" 2 mm 8 mm 8 eries on-polarized Retro 4.7" 3.2" 5 mm mm 8 eries Polarized Retro 6" 4" 5 mm mm 8 eries hort Range Diffuse.6".4" 5 mm 5 mm mm 5 mm 2" 2" 4" 6" 4 mm 4 mm 8 mm 2 mm with BRT-3 Reflector.6".6" 3.2" 4.7" 5 mm 5 mm mm 5 mm with BRT-3 Reflector 2" 2" 4" 6" 5 mm 5 mm mm 5 mm.2".2".4".6" 5 m (6') m 5 m (32') (49') DT 2 m (66') 25 m (82').5 m (.6'). m.5 m (3.2') (4.8') DT 2. m (6.4') 2.5 m (8.').5 m (.6'). m.5 m (3.2') (4.8') DT 2. m (6.4') 2.5 m (8.') 25 mm (") 5 mm 75 mm mm 25 mm (2") (3") (4") (5") DT Range: 2 m LD: Range: 2 m LD: Range: 2 m LD: P Range: mm LD: 5 mm mm 5 mm 5 mm mm 5 mm 8 eries Long Range Diffuse.6".4".2".2".4".6" 8 mm 6 mm 24 mm 32 mm 4 mm (3") (6") (9") (2") (5") DT Range: 3 mm LD: More information online at bannerengineering.com 25