Rockers Contents M S eries... Snap-in Mount A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap M S eries... 7 rackete

Transcription

1 Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Contents Rockers A S eries... Process Sealed 0.VA Logic Level Straight, Right Angle, & Vertical PC CW S eries... A Power Level Solder Lug, Quick Connect, & Right Angle PC Snap-in Mount CWS Series Illuminated... 8 Neon; 9A Power Level Quick Connect; Snap-in Mount CWSC Series Illuminated... LED; 9A Power Level Solder Lug/Quick Connect; Snap-in Mount G S eries... 8 Process Sealed 0.VA Logic Level Straight PC GW Series... Ultra-Thin 0.VA Logic Level Straight, Right Angle, & Vertical PC GW Series Illuminated... Fully Illuminated Paddle 0.VA Logic Level Straight, Right Angle, & Vertical PC JW Series... 0 Internationally Approved 0A & A Power Level Solder Lug; Snap-in-Mount JWS Series Illuminated & Nonilluminated... 0 Internationally Approved 0A Power Level Solder Lug; Snap-in-Mount LW Series Illuminated... 0A Power Level Incandescent Dual Lamps nkk 开关代理商全国统一热线 Solder Lug; Snap-in Mount 北京 深圳天津上海 shunto@

2 Rockers Contents M S eries... Snap-in Mount A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap M S eries... 7 racketed PC Mount A Power Level & 0.VA Logic Level Straight, Right Angle, & Vertical PC with racket M S eries... 8 Flat Frame Mount A Power Level & 0.VA Logic Level Solder Lug & Straight PC M00 Series Illuminated... 9 A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, & PC Flat Frame & Snap-in Mount MT Series Process Sealed A Power Level & 0.VA Logic Level Straight, Right Angle, & Vertical PC MLW Series Illuminated... 0 A Power Level Incandescent, Neon, & LED Lamps Solder Lug; Snap-in Mount P S eries... Internationally Approved 0A Power Level Solder Lug, Straight PC, & Quick Connect; Flat Frame Mount SW Series... 0 A to 0A Medium & High Capacity Solder Lug & Screw Lug Screw Mount WR Series... Environmentally Sealed A Power Level Solder Lug, Screw Lug, Wire Lead, & Quick Connect nkk 开关代理商全国统一热线 Snap-in Mount 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

3 Series A Process Sealed Subminiature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V AC minimum for minute minimum Mechanical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits Electrical Life: 0,000 operations minimum Nominal Operating Force:.7N (momentary);.8n (maintained) Contact Timing: Nonshorting (break-before-make) Angle of Throw: Materials & Finishes Actuator or Toggle: Case Housing: Support racket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Cap Installation Force: PC Processing Soldering: Cleaning: Standards & Certifications Nickel plated brass Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating rass with gold plating rass with gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) 9.N (8.8 lbf) maximum downward force on actuator Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. The A Series rockers have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

4 Process Sealed Subminiature Rockers Series A Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and moneysaving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants..00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

5 Series A Process Sealed Subminiature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons A Poles SPDT DPDT SPT Circuits NE NE () R () NE 8 () () 9 () S () * * () () * 7 () ( ) = Momentary * - circuits TYPICAL SWITCH ORDERING EXAMPLE K H D P H V V PC Terminals Straight Straight with racket DESCRIPTI FOR TYPICAL ORDERING EXAMPLE K Snap Top Actuator lack.0 (.mm) Wide Rocker Actuators Snap Top for Rocker K Code C Snap Top for Rockers * K Codes D & E *Available in Americas only AKH-DA Straight with Inline racket (Single Pole only) Right Angle with racket Vertical with racket Vertical with Inline racket (Single Pole only) C D E DPDT -NE- Circuit Right Angle PC Terminals Rockers.0 (.mm) Wide (K only).0 (.mm) Wide (K only).00 (7.mm) Wide (K only) Rocker C Colors A Rockers D & E A lack A White C Red C E Yellow F Green G lue H Gray nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

6 Process Sealed Subminiature Rockers Series A Pole SP DP Model A A A AR A8 A9 AS A A A AR A8 A9 AS Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Up Center Down Up Center Down () () () () () () NE NE NE NE NE NE () () () () () () Connected Terminals & Schematics ACTUATORS Note: - OPEN - SPDT - - OPEN - - DPDT For Throw (-On) Pole Model Up Center Down SP K A A A7 Snap Top Slot For Rocker AT9 () External Connection (in) (out) (out) (out) - - (.0) POLES & CIRCUITS Slot External Connection (in) (out) (out) (out) (.).098 () () External Connection (in) (out) (out) (out) - - K Snap Top For Rockers AT0 and AT0 The SPT model utilizes a double pole base. Terminal numbers are not actually on the switch. External connections must be made during field installation. (.).7 (COM) External Connection (COM) (out) Common (in) nkk 开关代理商全国统一热线 北京 上海 (.).098 (out) (out) External Conn Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

7 Series A Process Sealed Subminiature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons P H C Straight (.08) Typ.00 (0.8).0 Antirotational Material: Polyamide Colors Available: A,, C, E, F, G, H D E (.) Typ.00 Color Codes: (9.0). Right Angle with racket (.08).00 (0.).0 (0.7).08 (0.).00 (.) Typ.00 (0.) Dia Typ.0 (8.8). (.) Typ.00 (0.) Dia Typ.0 (8.8). (9.0). AT9.0 (.mm) Wide Rocker AT0.0 (.mm) Wide Rocker Antirotational Material: Polyamide Colors Available: A,, C Antirotational Material: Polyamide Colors Available: A,, C V PC TERMINALS Use of a support bracket is recommended to increase PC mounting strength and stability. AT0.00 (7.mm) Wide Rocker Straight with racket (.08).00 (.08).00 (9.0). (0.).00 Straight with Inline racket Single Pole only A C E F G lack White Red Yellow Green lue (8.8). (.) Typ.00 (0.) Dia Typ.0 (0.) Typ.0 (0.7) Typ.08 Vertical with racket (.) Typ.00 (.08).00 (0.).0 (0.7).08 (.08).00 (9.0). (0.) Dia Typ.0 (0.) Typ.00 (8.8). ROCKERS & COLORS (.9).08 (.).77 (.). (.).77 (.). (.).77 (9.0).78 (.).8 (.7).80 (.).8 (.).00 (.).8 V (8.) (0.)..0 (7.0) (8.8).7. (7.0) (8.8).7. (.).00 (0.) Typ.0 (9.0). (0.).00 (.) Typ.00 (0.) Dia Typ.0 (0.7) Typ.08 (.0).09 C L (.08).00 Vertical with Inline racket Single Pole only (.) Typ.00 (.08).00 (0.).0 (.).0 (.).0 (7.).00 (0.) Dia Typ.0 (0.) Typ.00 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (0.7).08 (9.0). (.0).09 C L (.08).00 (0.).790 (.) (.7) H (7.9).0 (7.) (8.9).0 Gray

8 Process Sealed Subminiature Rockers Series A (.0). (.0). (.).0 (.).0 (.).0 (9.). (0.) Typ.0 (.08).00 (.).0 (.).0 (9.).7 (.7).80 (.7).80 (.) (.7).8.80 (.).8 (.).8 (8.8). (7.0).7 (.). (.) (.7).8.80 (8.8). (7.0).7 (.). (8.8). (7.0).7 (.). (0.8).0 (8.).9 (8.8). (7.0).7 (.). P/N This Side (0.7).08 (.).77 (.). TYPICAL SWITCH DIMENSIS (0.8).0 (8.).9 (0.8).0 (8.).9 P/N This Side (0.) Dia Typ.0 (.) Typ.00 (.). P/N This Side (0.) Dia Typ.0 (.) Typ.00 (.). P/N This Side (0.) Typ.0 (0.) Dia Typ.0 (0.).00 (.) Typ.00 (.). P/N This Side (0.8).0 (8.).9 (9.8).9 (0.) Typ.0 (0.) Dia Typ.0 (.) Typ.00 (.). (0.8).0 (.). (.). (.08).00 (0.).00 Single Pole (0.).0 Double Pole (0.).0 Single Pole (0.).0 Double Pole C L Single Pole (9.8).8 (.0).09 (.8).0 C L (.).00 (0.7) Typ.08 (0.).0 (9.8).8 (0.) Typ.0 (9.8).8 (.0).09 (.8).0 (0.) Typ.0 (9.8).8 (.08).00 Straight PC AKP-DA Straight PC AKP-DA Straight PC racket Terminals Terminals AK-DA (9.8).8 (0.7) Typ.08 (.08).00 (0.).0 (.8). (0.) Dia Typ.0 (.) Typ.00 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 (.).00 C L (.0).09 (.) Typ.00 (0.8) Dia Typ.0 C L (.08).00 (.) Typ.00 (0.8) Dia Typ.0 C L (.08).00 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 (.08).00 (0.8) Dia Typ.0 (.) Typ.00 (0.8) Dia Typ.0 Straight PC racket nkk 开关代理商全国统一热线 北京 上海 (.) Typ.00 AK-DA Right Angle PC AKH-DA Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

9 Series A Process Sealed Subminiature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Right Angle PC AKH-DA Vertical PC Vertical PC AKV-DA (0.) Typ.0 (.).00 (.).0 (0.) Typ.0 (.08).00 (.).0 (.0). (0.7) Typ.08 TYPICAL SWITCH DIMENSIS (.) (.7).8.80 (7.0).7 (8.8). (.). Double Pole P/N This Side (.).77 (0.7).08 (.). (.9).9 Single Pole (.).00 (.).00 P/N This Side (.).9 AKV-DA V Terminals V Terminals (0.) Typ.0 (.08).00 Side View of Rocker Right Angle Mounting PC Single Pole Only (.).0 (9.).7 (.).0 Double Pole (0.8).0 (.).0 (.).00 (.08).00 (0.8).0 (.).08 (0.).00 (.0) (.).09. (.) Typ.00 (.). (0.).00 ROCKER MOUNTING PRECAUTI Interruption by end of PC (.7).80 (.).8 (.).0 (8.8). (7.0).7 (0.7).08 (.08).00 (.). PC P/N This Side (.).9 (0.8).0 (.).08 (0.).00 (.0).09 (.) Typ.00 (.). Side View of Rocker Vertical Mounting PC Single Pole and Double Pole C L (0.).0 (0.).0 (9.8).8 (0.) Dia Typ.0 (.0).09 (.8).0 (0.).0 (0.0).9 (0.) Dia Typ.0 (.) Typ.00 (0.) Typ.0 (0.).0 (0.) Dia Typ.0 (.08).00 Interruption by end of PC (.0).09 (.) Typ.00 (0.8) Dia Typ.0 (.).00 C L (.).0 (.) Typ.00 (.).00 (.08).00 (0.8) Dia Typ.0 C L (.0).09 (.) Typ.00 (.08).00 (0.8) Dia Typ.0 (.08).00 (.) Typ.00 (.08).00 (0.8) Dia Typ.0 Rocker switches with vertical and right angle terminals must be mounted so that extension of the PC board beyond the top of the switch housing does not interrupt rocker movement, in turn causing incomplete switching operation. The MAXIMUM limit of the PC board extension is.0 (.mm), as illustrated below. This precaution does not apply to the double pole switch with right angle terminals due to the extra width of the switch allowing the rocker to clear the PC board. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ PC

10 Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Series CW General Specifications CWSA CWS CWT Miniature Power Rockers Electrical Capacity Power Level: For Resistive Load 0V AC Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength:,00V AC minimum between contacts for minute minimum,000v AC minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum with Resistive Load &,000 operations with Inductive Load Nominal Operating Force:.0N Angle of Throw: 0 Operating Temperature Range: 0 C ~ +70 C (+ F ~ +8 F) Materials & Finishes Rocker: Polycarbonate Stationary Contacts: Silver alloy Housing: Polyamide ase: Laminated thermosetting sheets Movable Contactor: rass w/silver alloy plating Contact Terminals: Copper with silver plating Movable Contacts: Silver Common Terminals: rass with silver plating Electrical Capacity Power Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: For Resistive Load 0V AC 0 milliohms maximum 00 megohms 00V DC,00V AC minimum between contacts for minute minimum,000v AC minimum between contacts & case for minute minimum 0,000 operations minimum 0,000 operations minimum with Resistive Load &,000 operations with Inductive Load.0N for single pole models; 0.0N for double pole models Angle of Throw: 0 Operating Temperature Range: 0 C ~ +70 C (+ F ~ +8 F) Materials & Finishes Rocker: Polycarbonate Stationary Contacts: Silver alloy Housing: Polyamide ase: Laminated thermosetting sheets Movable Contactor: eryllium copper w/silver alloy plating Terminals: rass with silver plating Movable Contacts: Silver Electrical Capacity Power Level: For Resistive Load V AC; 0V AC; 0V DC Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum between contacts for minute minimum,00v AC minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum Nominal Operating Force:.0N Angle of Throw: 0 Operating Temperature Range: C ~ +70 C ( F ~ +8 F) Materials & Finishes Rocker: Glass fiber reinforced polyamide ase: LCP (Liquid Crystal Polymer) Housing: Polyamide Contact Terminals: rass + silver with silver plating Movable Contactor: Phosphor bronze w/silver plating Common Terminals: rass with silver plating Movable Contacts: Silver alloy nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

11 Miniature Power Rockers Distinctive Characteristics CWSA Low cost molded rocker. See-saw contact mechanism Stable stationary contact construction for high reliability. Easily installed with snap-in mounting. Large terminal hole dimensioned.07 x.098 (.7mm x.mm) simplifies wiring and soldering. Wave Soldering (PC version): See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. CWS Low cost molded rocker. Snap-acting contact mechanism gives smooth actuation and audible feedback. Stable stationary contact construction for high reliability. Front panel, snap-in mounting for labor-saving installation. Solder lug/quick connect terminals can be used with connectors. Manual Soldering: See Profile in Supplement section. CWT Low cost molded rocker in compact, slim design. See-saw contact mechanism Outstanding insulation resistance and dielectric strength. Dust proof construction protects contact area. Stable stationary contact construction for high reliability. Front panel, snap-in mounting for labor-saving installation. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. Manual Soldering: See Profile A in Supplement section. Series CW nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

12 Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons CWSA STANDARDS & CERTIFICATIS Specific CWSA models listed below are qualified for Underwriters Laboratories Inc. recognition and Canadian Standards Association certification. culus marking on case is standard as noted in following table. CWS Model AC culus File No. Marking on Case CWSA 0V E Standard CWSA 0V E Standard Specific CWS models listed below are qualified for Underwriters Laboratories Inc. recognition and Canadian Standards Association certification. culus marking on case is standard as noted in following table. CWT Model AC culus File No. Marking on Case CWS 0V E Standard CWS 0V E Standard Specific CWT model listed below is qualified for Underwriters Laboratories Inc. recognition and Canadian Standards Association certification. culus marking on case is standard as noted in following table. Model AC culus File No. Marking on Case CWT V E Standard 0V nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

13 Miniature Power Rockers Series CW CWSA Pole SPST & SPDT TYPICAL ORDERING EXAMPLE CWSAAANS CWS Poles SPST DPST CWT Pole SPDT Circuits NE NE Circuit NE TYPICAL SWITCH ORDERING EXAMPLES TYPICAL ORDERING EXAMPLE CWSAAF Circuit NE Cap Color A lack A Cap Color A lack Cap Color A lack A A A Housing A lack Housing A lack Housing A lack A A Terminals S Solder Lug* N Inscription For SPST & SPDT No Code None For SPST Horizontal Vertical Dot Marking No Code Inscription None (SPST only) Horizontal Vertical Dot Marking (SPST only) S S H F S Terminals Solder Lug* Right Angle PC * Wire harness & cable assemblies offered only in Americas Terminals Quick F Connect* H Right Angle PC * Wire harness & cable assemblies offered only in Americas TYPICAL ORDERING EXAMPLE CWTAAS * Wire harness & cable assemblies offered only in Americas nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

14 Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons No Code Solder Lug None Not available in double pole. CWSAAANS Right Angle CWSAAANH Horizontal Orientation Only On-None-Off models are available with the horizontal inscription. INSCRIPTIS TYPICAL SWITCH DIMENSIS FOR CWSA Single Pole No Inscription Vertical Orientation Only On-None-Off models are available with the vertical inscription. Single Pole Horizontal On-Off Inscription Dot Marking Only Single Pole On-None- Off models are available with the dot inscription. The IEC symbols for On-Off are supplied with Single Throw models only. Orientation of inscription must be selected. Inscription color is white ink on black. (0.8).89 (.).0 (.8).8 (0.).0 (.).0 (0.).0 (.8).8 (0.8).89 0 (.). (.0).079 (.0).079 (.).7 (.).7 (.). (.0). (.0).0 NKK P/N This Side (.7) x (.) Typ.07 x.098 b a (.0).7 (.).07 Single throw model does not have terminal b (0.8).0 (7.0).9 (7.0) Typ.7 (0.) Typ.00 (0.).008 (.9). (.9).08 (.).8 (0.8) Typ.0 b a (.).8 (.9).08 a b (8.).78 (.0).8 Terminal numbers are on side of switch body (8.).78 (7.0) Typ.7 Terminal numbers are on side of switch body (.9).08 (9.).7 Panel Thickness.00 ~.079 (0.7mm ~.0mm) b a (.0). (.8) Dia Typ.07 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

15 日本 NKK 官网的英文船型开关说明书 Miniature Power Rockers Series CW (.).8 (.8). (0.).7 (.).9 (.).8 (.8).89 (9.0). 0 (0.).7 (.).9 (.8). (.).8 0 (.9).08 0 (.0).079 (.0) (.).0 (.7). (.7). (.).7 (.).09 TYPICAL SWITCH DIMENSIS FOR CWS NKK P/N This Side (.).8 (.).9 Double Pole Vertical On-Off Inscription (7.8).70 (.).88 Single Pole Dot Inscription (.0).09 (0.8).0 a TYPICAL SWITCH DIMENSIS FOR CWT (.).0 (.0).09 (8.).9 (.) Dia Typ.09 (.) Dia Typ.0 (.0).97 (.).0 (.0).7 (.9).08 (.).9 (.0).7 a a Single Pole No Inscription NKK P/N This Side (.) x (.0) Typ.0 x.079 (0.8) Typ.0 (.7) Typ.8 (.).8 (8.).7 (7.).8 (8.0).709 a a (.9).9 (.0).97 (.).9 (.9).08 (.) Typ.098 (.0) Typ.7 (.7) Typ.87 a (0.8) Typ.0 Terminal numbers are on bottom of switch (.) Typ.0 Terminal numbers are on bottom of switch (.0).97 (.8).8 (.0).87 (.0) Typ.079 Terminal numbers are on side of switch body (.0) Typ.7 (.9).08 Panel Thickness.00 ~.079 (0.7mm ~.0mm) (.) Typ.098 a (.9).9 (.0).97 Footprint SPST (.9).9 (.0).97 (.8).8 a a Footprint DPST (9.).7 (9.).7 Panel Thickness.00 ~.079 (0.7mm ~.0mm) (.8) Dia Typ.07 (.7).8 (.8) Dia Typ.07 Quick Connect CWSAAF Right Angle CWSAAH Solder Lug CWTAAS nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

16 Series CWS Neon Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: 0.0N Angle of Throw: 0 Materials & Finishes Rocker: Housing: Movable Contactor: Movable Contacts: Stationary Contacts: Switch Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Soldering Time & Temp: Standards & Certifications UL: CSA: 0 milliohms maximum 00 megohms 00V DC,00V AC minimum between contacts for minute minimum;,000v AC minimum between contacts & case for minute minimum 0,000 operations minimum 0,000 operations minimum Polycarbonate Polyamide eryllium copper with silver plating Silver alloy Silver alloy rass with silver plating rass with silver plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of 0.7mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Manual Soldering: See Profile in Supplement section. File No. E V AC Markings on case are standard. File No. 070_0_000 V AC Markings on case are standard. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

17 Neon Miniature Power Rockers Series CWS Distinctive Characteristics Full face, Neon illumination in choice of red, amber, or green. Neon lamp suited to V AC applications. 9-amp electrical capacity in compact body. uilt-in resistor for direct connection to V AC power source. Low cost molded rocker. Front panel, snap-in mounting assures labor-saving installation. Single-break, snap-acting contact mechanism gives smooth actuation and audible feedback. Quick-make, quick-break characteristic limits arcing and prolongs electrical life. Stable stationary contact construction for high reliability. Offset terminal alignment gives outstanding insulation resistance and dielectric strength. Solder lug/.87 quick connect terminals can be used with connectors. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

18 Series CWS Neon Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Pole CWS Model Poles DPST Circuit NE DPST -NE- Circuit TYPICAL SWITCH ORDERING EXAMPLE DESCRIPTI FOR TYPICAL ORDERING EXAMPLE Red Rocker Cap Solder Lug/ Quick Connect Terminals C A C F CWSCACF POLE & CIRCUIT Red Neon Lamp lack Housing Rocker Position Connected Terminals Throw & Switch/Lamp Schematic Down Center Up Down Center Up Housing DP CWS NE -a -a OPEN OPEN DPST C D F Neon Lamp Colors Red Amber Green A lack C D F Cap Colors Red Amber Green Terminals Note: Terminal numbers a & a are actually on the switch. F IMPORTANT: Solder Lug/.87 (.7mm) Quick Connect* * Wire harness & cable assemblies offered only in Americas Switches are supplied with UL & CSA markings on case. Specific models & ratings noted on General Specifications page. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ a a

19 Neon Miniature Power Rockers Series CWS (.).8 The Neon lamp is factory assembled and not available separately. The lamp circuit is synchronous to switching circuit. The electrical specifications shown are determined at a basic temperature of C. Values for the built-in resistors are given in the accompanying table. A On Off (I O) symbols are molded on the bezel. HOUSING lack Housing with Snap-in Mounting Cap Colors Available C D F Red Amber Green (.8). (0.).7 (.).9 (.9).08 0 (.0).079 (.7). NE LAMP COLORS & SPECIFICATIS (.).8 L o a d Colors Red Amber Green Voltage V V AC V AC V AC Internal Series Resistance K ohms K ohms 8K ohms Current I.mA.mA 0.mA Endurance Hours,000,000 8,000 TYPICAL SWITCH DIMENSIS (.0).09 (8.).9 (.) Dia Typ.09 (.) Dia Typ.0 (.7) Typ.87 (.).0 Neon Lamp Double Pole (7.).8 (8.).7 a Source F CAP COLOR CODES a a (.).9 (.9).08 a C TERMINALS Solder Lug/.87 (.7mm) Quick Connect (.) Typ.098 (.0) Typ.7 (.0).7 (.0).97 (0.8) Typ.0 (.)R.0 (0.8)R.0 (.7).87 Thk = (0.8).0 (.9).08 (9.).7 Panel Thickness.00 ~.079 (0.7mm ~.0mm) (8.).9 (.).0 D Caps are factory assembled and are not available separately. F Neon Illuminated nkk 开关代理商全国统一热线 北京 上海 CWSCACF Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

20 Series CWSC LED Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: V AC or 0V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: 0 milliohms maximum 00 megohms 00V DC,00V AC minimum between contacts for minute minimum;,000v AC minimum between contacts & case for minute minimum 0,000 operations minimum 0,000 operations minimum Mechanical Life: Electrical Life: Nominal Operating Force: Single Pole.0N; Double Pole 0.0N Angle of Throw: Materials & Finishes Rocker: Housing: Movable Contactor: Movable Contacts: Stationary Contacts: Switch Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Soldering Time & Temp: Standards & Certifications UL: Polycarbonate Polyamide eryllium copper with silver plating Silver alloy Silver alloy rass with silver plating rass with silver plating 0 C through +0 C (+ F through + F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Manual Soldering: See Profile A in Supplement section. File No. E All models recognized at V AC & 0V AC. culus marking on case is standard. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

21 LED Miniature Power Rockers Series CWSC Distinctive Characteristics Full face, bright LED illumination in choice of red, amber, or green for visible status indication. 9-amp or -amp electrical capacity in compact body. Interior shield prevents contamination of the rocker by carbon from arcing. Front panel, snap-in mounting assures labor-saving installation. Single-break, snap-acting contact mechanism gives smooth actuation and audible feedback. Quick-make, quick-break characteristic limits arcing and prolongs electrical life. Stable stationary contact construction for high reliability. Offset terminal alignment gives outstanding insulation resistance and dielectric strength. Solder lug/.0 quick connect terminals can be used with connectors. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

22 Series CWSC LED Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons CWSC Poles SPST DPST Circuit NE Clear Rocker Cap with Red Diffuser DPST -NE- Circuit Solder Lug/ Quick Connect Terminals TYPICAL SWITCH ORDERING EXAMPLE JC A Cap/Diffuser Colors JC JD JF Clear/Red Clear/Amber Clear/Green TYPICAL ORDERING EXAMPLE CWSCJCACS A Housing lack Red LED lack Housing C D F LED Colors Red Amber Green C S IMPORTANT: S Terminals Solder Lug/.0 (.79mm) Quick Connect* * Wire harness & cable assemblies offered only in Americas Switches are supplied with culus marking on case. Specific models & ratings noted on General Specifications page. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

23 LED Miniature Power Rockers Series CWSC Pole A Model Rocker Cap/Diffuser Caps are factory assembled and are not available separately. On Off (I O) symbols are molded on the bezel. HOUSING lack Housing with Snap-in Mounting The LED is factory assembled and not available separately. LED circuit is isolated and requires an external power source. Polarity marks are on the bottom of the switch. The electrical specifications shown are determined at a basic temperature of C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement. POLE & CIRCUITS Rocker Position Connected Terminals Throw & Switch/Lamp Schematics Down Center Up Down Center Up SP CWSC NE -a OPEN OPEN SPST CAP TYPES & COLORS LED SPECIFICATIS & COLORS S (+) (-) Colors: Cap/Diffuser Colors Available JC JD JF Clear/Red Clear/Amber Clear/Green TERMINALS Solder Lug/.0 (.79mm) Quick Connect C (.). (.).0 Thk = (0.).00 (7.).80 (.79).0 D Red Amber Green Forward Peak Current I FM 0mA 0mA 0mA Typical Forward Current I F 0mA 0mA 0mA Forward Voltage V F.9V.0V.V Reverse Peak Voltage V RM V V V Current Reduction Rate above C Ambient Temperature Range Notes: Terminal numbers and polarity are actually on the switch. (COM) DP CWSC NE -a -a OPEN OPEN DPST (+) (-) I F 0.mA/ C 0.9mA/ C 0.9mA/ C 0 C ~ +0 C (+) (-) nkk 开关代理商全国统一热线 北京 上海 (COM) a a a F Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

24 Series CWSC LED Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons LED Illuminated CWSCJCACS LED Illuminated CWSCJCACS (.7).8 (.).8 (.7).8 (.).8 (0.).7 (.).9 (0.).7 (.).9 TYPICAL SWITCH DIMENSIS (.9).08 (.9).08 (.0).079 (.0).079 (.7). (.7). Single Pole NKK P/N This Side (7.7).97 Double Pole NKK P/N This Side (7.7).97 (7.).80 (7.).80 (.79) Typ.0 (0.).00 (.79) Typ.0 (0.).00 (.).7 (.) Typ.0 (.) Typ. (.).7 (.) Typ.0 (.) Typ. (.).77 (.).77 (8.).7 (8.).7 (.9) Typ.9 (.7) Typ.07 a (.7) Typ.07 a a (.9).9 (.).9 (.9).08 a (.).9 (.9).08 (0.) Typ.00 (0.) Typ.00 (.) Typ.089 (.) Typ.089 (.9).08 (9.).7 Panel Thickness.00 ~.079 (0.7mm ~.0mm) (.9).08 (9.).7 Panel Thickness.00 ~.079 (0.7mm ~.0mm) nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

25 Series G Process Sealed Ultra-Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V AC minimum for minute minimum Mechanical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits Electrical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits Nominal Operating Force:.8N for momentary &.0N for maintained Angle of Throw: 8 Materials & Finishes Actuator: Case: Sealing Rings: Movable Contact: Stationary Contacts: ase: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Cap Installation Force: PC Processing Soldering: Cleaning: Standards & Certifications Glass fiber reinforced polyamide Glass fiber reinforced polyamide Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide Phosphor bronze with gold plating C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) 9.N (8.8 lbf) maximum downward force on actuator Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. The G Series rockers have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

26 Process Sealed Ultra-Miniature Rockers Series G Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time-and money-saving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.).00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. Round terminals facilitate easier through-hole mounting on PC boards. Matching indicators available. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

27 Series G Process Sealed Ultra-Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Poles SPDT DPDT Pole SP DP G Circuits NE TYPICAL SWITCH ORDERING EXAMPLE K P Y NE () 8 () () 9 () Model G G G G8 G9 G G G G8 G9 ( ) = Momentary K Actuator Snap Top P PC Terminals Straight Y Rocker Cap DESCRIPTI FOR TYPICAL ORDERING EXAMPLE Snap Top with lack Rocker DPDT -NE- Circuit GKP-YA Rocker A C A Cap Colors Straight PC Terminals Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Up Center Down Up Center Down () () NE NE NE NE () () () () () () POLES & CIRCUITS Note: - OPEN - SPDT - - OPEN - - DPDT lack White Red Terminal numbers are not actually on the switch. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (COM) (COM)

28 Process Sealed Ultra-Miniature Rockers Series G K P Y Snap Top for Rocker Straight AT0 Rocker Material: Polyamide Finish: Matte Colors Available: A,, C (.). 8 Color Codes: (.). (.0) Dia. (.8).0 (.0). (.).0 (7.0).7 (.8).0 8 ACTUATOR (.).090 (.0).7 PC TERMINALS (.) Typ.00 (0.) Dia Typ.0 (7.0).7 (.).77 (.) Typ.00 (.).0 (.7) Dia.07 ROCKER CAP & COLORS Actual Size (.0). (.). A C lack White Red TYPICAL SWITCH DIMENSIS P/N This Side (0.) Dia Typ.0 (.).0 (.) Typ.00 Single & Double Pole (.).77 On single pole models positions & are support pins. (.).00 (7.0).7 (0.) Dia Typ.0 (.).8 (0.0).9 8 (.).00 (0.) Dia Typ.0 nkk 开关代理商全国统一热线 北京 上海 (.).00 (.). (.) Typ.00 (.) Typ.00 (.). Straight PC GKP-YA Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

29 Series GW Ultra-Thin Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V AC minimum for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum Nominal Operating Force: For Rockers.70N; for Paddles.0N Angle of Throw: 8 Materials & Finishes Actuator: Case: Sealing Ring: Movable Contact: Stationary Contacts: ase: Mounting racket: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: PC Processing Shock: Soldering: Cleaning: Standards & Certifications Flammability Standards: Glass fiber reinforced polyamide (UL9V-0) Glass fiber reinforced polyamide (UL9V-0) Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide (UL9V-0) Phosphor bronze with tin plating Phosphor bronze with gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section.. These devices are not process sealed. Hand clean locally using alcohol based solution. UL9V-0 actuator & case/base The GW Series rockers have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

30 Ultra-Thin Rockers Series GW Distinctive Characteristics Various colored rockers and paddles. Combination of dust cover and closely fit housing, actuator, and interior pivot provides protection for contacts. Detent mechanism design of coil spring, plunger, and plastic detent results incrisp and positive actuation. Extremely thin size allows high density PC mounting and makes these switchesideal for handheld equipment. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Molded-in, epoxy sealed terminals lock out flux and other contaminants..00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing for straight and angle mounting. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

31 Series GW Ultra-Thin Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Poles GW SPDT DPDT Pole Model Circuit NE TYPICAL SWITCH ORDERING EXAMPLE DESCRIPTI FOR TYPICAL ROCKER ORDERING EXAMPLE Straight PC Terminals GWRCP POLES & CIRCUIT R Red Rocker Cap C SPDT -NE- Circuit P H V P PC Terminals Rocker Position Connected Terminals Throw & Schematics Straight Right Angle Vertical Up Center Down Up Center Down Note: Terminal numbers are not actually on the switch. SP GW NE - OPEN - SPDT DP GW NE - - OPEN - - DPDT Straight PC GWRCP Straight PC GWLCP (0.) Typ.00 (7.0).7 (0.) Typ.00 (0.) Typ.00 (7.0).7 (.).0 (0.) Typ.00 (.0).8 (.).77 (.0).8 (.).77 TYPICAL SWITCH DIMENSIS (.).0 8 (.).09 (7.0).7 P/N This Side (0.) Dia Typ.0 (.).0 (.) Typ.00 (.).00 On single pole models positions & are support pins. 8 (.8).0 Actuators R Rocker L Paddle (7.0).7 P/N This Side (0.) Dia Typ.0 (.).0 (.) Typ.00 Actuator Colors White C Red H Gray (.).00 (.).00 (0.) Dia Typ.0 Single Pole (.) Typ.00 Double Pole (.).00 (COM) (0.) Dia Typ.0 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (COM) (.) Typ.00

32 Ultra-Thin Rockers Series GW (0.).00 (0.).00 (.).0 (.).0 (.9). (0.) Typ.00 (.9). (0.) Typ.00 (0.) Typ.00 (7.).0 (0.) Typ.00 (7.).0 (.). (0.) Typ.00 (.).00 (.). (0.) Typ.00 (.).00 (7.0).7 (.08).00 (7.).9 (7.0).7 (.08).00 (7.).9 (.).77 (.0).97 (.).77 (.0).97 (.0) (.0).8 (.).09 8 (.).0 (.).0 8 (0.).00 (.).09 (0.).00 (.8).0 (.8).0 TYPICAL SWITCH DIMENSIS P/N This Side (0.).00 (.08).00 (7.8).0 (.).77 P/N This Side (0.).00 (.08).00 (0.).0 P/N This Side (.08).00 (.7).0 P/N This Side (.08).00 (.7).0 (.7).08 (.).77 (0.).00 (.).00 Single Pole Double Pole (.7).08 (.7).08 (0.) Typ.00 (.) Typ.00 (.7).08 (0.) Typ.00 (.) Typ.00 Single Pole Double Pole (0.) Dia Typ.0 (.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (0.) Dia.0 (.).00 (.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (0.) Dia Typ.0 (.).00 (0.) Dia Typ.0 (.).00 (0.) Dia Typ.0 nkk 开关代理商全国统一热线 北京 上海 (0.) Dia.0 (.7).00 C L (.08).00 (.).00 (.08).00 (.) Typ.00 (.08).00 (.) Typ.00 (.08).00 Right Angle PC GWRCH Right Angle PC GWLCH Vertical PC GWRCV Vertical PC GWLCV Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

33 Series GW Ultra-Thin Fully Illuminated Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V AC minimum for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum Nominal Operating Force:.0N Angle of Throw: 8 Materials & Finishes Actuator: Case: Sealing Ring: ase: Movable Contact: Stationary Contact: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: PC Processing Shock: Soldering: Cleaning: Standards & Certifications Flammability Standard: Polycarbonate resin (UL9V-0) Glass fiber reinforced polyamide (UL9V-0) Nitrile butadiene rubber Glass fiber reinforced polyamide Phosphor bronze with gold plating Phosphor bronze with gold plating Phosphor bronze with gold plating C through + C ( F through + F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minutes; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. UL9V-0 actuator & case The GW Series illuminated paddles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

34 Ultra-Thin Fully Illuminated Paddles Series GW Distinctive Characteristics World s smallest fully illuminated paddles (patent pending) for highly visible status indication; LEDs available in red, green, or amber for single color and red/green for bicolor. Specially designed switching mechanism provides crisp actuation feedback to positively indicate circuit transfer (patent pending). Insert molded terminals prevent entry of flux and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.).00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing for straight and angle mounting. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

35 Series GW Ultra-Thin Fully Illuminated Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Pole SPDT Pole GW Model Circuit NE TYPICAL SWITCH ORDERING EXAMPLE L J P D L Actuator Paddle J Actuator Color Clear DESCRIPTI FOR TYPICAL PADDLE ORDERING EXAMPLE Straight PC Terminals GWLJPD Clear Paddle Amber LED POLE & CIRCUIT P H V SPDT -NE- Circuit PC Terminals Straight Right Angle Vertical Paddle Position Connected Terminals Throw & Schematics Up Center Down Up Center Down SP GW NE - OPEN - SPDT LED COLORS & SPECIFICATIS () () () C D F CF Note: Terminal numbers are not actually on the switch. LED circuit is isolated and requires an external power source. Single Color Single Color LED Colors Single Color Red Amber Green icolor Red/Green LEDs are an integral part of the the switch and not available separately. The electrical specifications shown are determined at a basic temperature of C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the Forward Peak Current Typical Forward Current Forward Voltage Reverse Peak Voltage Colors I FM I F V F V RM Red ma 0mA.0V V Amber ma 0mA.V V Green ma 0mA.V V Red/Green ma/ma 0mA/0mA.0V/.V V/V formula in the Supplement section. Current Reduction Rate Above C I F 0.mA/ C 0.mA/ C 0.mA/ C 0.mA/ C Ambient Temperature Range C ~ + C nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ C (COM) D F icolor icolor CF () Red () Green

36 Ultra-Thin Fully Illuminated Paddles Series GW (0.).00 (0.) Typ.00 (7.0).7 (.).0 (0.) Typ.00 (.0).8 (.).77 8 (.8).0 TYPICAL SWITCH DIMENSIS (7.0).7 P/N This Side (0.) Dia Typ.0 (.).0 (.) Typ.00 Straight PC & are LED terminals; is a support pin on single color models & an LED terminal on bicolor models. GWLJPC (.).0 (.9). (0.) Typ.00 (7.0).7 (.08).00 (7.).9 8 (.).0 (.0).8 (.8).0 P/N This Side (0.).00 (.08).00 (0.).0 (.).77 (.7).08 (0.).00 (.).00 Right Angle PC & are LED terminals; is a support pin on single color models & an LED terminal on bicolor models. GWLJHD (0.) Typ.00 (7.).0 (.). (0.) Typ.00 (.).00 (.).77 (.0).97 8 (0.).00 (.8).0 P/N This Side (.08).00 (.7).0 (.7).08 (0.) Typ.00 (.) Typ.00 Vertical PC & are LED terminals; is a support pin on single color models & an LED terminal on bicolor models. GWLJVCF (.).00 (0.) Dia Typ.0 (.) Typ.00 (0.) Dia.0 (.).00 (.).00 (.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (.).00 (.).00 (.08).00 (0.) Dia Typ.0 (.) Typ.00 (.08).00 (0.) Dia Typ.0 nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

37 Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Series JW General Specifications High Inrush 0 & Amp Rockers Electrical Capacity (Resistive Load) Power Level: /0V AC for JWM & JWMW models; 0V DC for JWMW; /0V AC for JWL & JWLW models; 7V DC for telecommunication applications Other Ratings Contact Resistance: 0 milliohms maximum for JWM & JWMW; 0 milliohms maximum for JWL & JWLW Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum between contacts for minute minimum;,000v AC minimum between contacts & case for minute minimum Mechanical Life:,000 operations minimum Electrical Life:,000 operations minimum Nominal Operating Force: JWM & JWMW Single Pole.9N & Double Pole 7.8N JWL Single Pole.00N & Double Pole 0.00N; JWLW Double Pole 0.00N Angle of Throw: Materials & Finishes Rocker: Polyphenylene ether (UL9V-0) Case/ase: Melamine (UL9V-0) Housing/Frame & arrier: Polyamide (UL9V-0) Contacts: Silver alloy with silver plating Interior Seal for JWM & JWL: Polyphenylene sulfide (UL9V-0) Terminals: rass with silver plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Sealing: Installation Soldering Time & Temperature: C through +70 C ( F through +8 F) for JWM & JWL; C through +8 C ( F through +8 F) for panel seal JWMW & JWLW models 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) IP7 of IEC09 standard for panel seal JWMW & JWLW models; dust resistant inner seal for others Manual Soldering: See Profile A in Supplement section. Standards & Certifications Flammability Standards: UL9V-0 for rocker, housing, seal & case/base of JWL, JWM, JWMW & JWLW models TV Ratings for UL & CSA: JWM (TV-) Overload 0V AC for 0 operations: Steady State Current (rms) 7.A; Minimum Inrush Current (peak) A. JWM (TV-) Endurance 0V AC for,000 operations: Steady State Current (rms) A; Minimum Inrush Current (peak) 78A. JWL (TV-8) Overload 0V AC for 0 operations: Steady State Current (rms) A; Minimum Inrush Current (peak) A. JWL (TV-8) Endurance 0V AC for,000 operations: Steady State Current (rms) 8A; Minimum Inrush Current (peak) 7A. UL: CSA: File No. E JWM & JWMW models recognized at 0V AC. JWMW recognized at 0V DC. JWL & JWLW models recognized at 0V AC; JWL at 7V DC. Models below recognized only when ordered with marking on switch. JWMW: add /U to end of part number to order UL mark on switch; add /CUL to end of part number to order culus mark on switch. JWL: add /U-DC to end of part number to request UL rating on DC rated switch. File No. 0_0_000 JWM & JWMW models certified at 0V AC; JWL models certified at 0V AC. VDE: License No. 7 JWM models approved at steady state A, inrush 80A, resistive 0A, & motor load A all at 0V AC; JWL models approved at steady state inrush 8A, resistive A, & motor load 8A all at 0V AC. Note: JWM & JWL Double Pole, Single Throw models approved only with the international - symbols on the actuator. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

38 High Inrush 0 & Amp Rockers Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current, with high electrical capacity of 0 and Amps. JWM models certified for TV- rating and JWL models for TV-8 rating. JWMW and JWLW panel seal versions meet IP7 of IEC09 Standards (similar to NEMA and ). Prominent external insulating barriers increase insulation resistance and dielectric strength. Uniquely constructed to break light contact welds. Increased electrical life with specially designed plate to minimize contact bounce. Constructed for dust resistance with interior cover between actuator and contact area. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. Solder lug/quick connect terminals can be used with connector. Housing and case of heat resistant resin meet UL9V-0 standard. Series JW Actual Size JWM nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

39 Series JW High Inrush 0 & Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons M MW L LW JW LW Ratings /0V AC Panel Seal /0V AC /0V AC Panel Seal /0V AC Poles SPST SPDT DPST DPDT Notes: DPST must have international - symbols for VDE approval. JWLW available in DPST & DPDT only. Circuits NE NE lack Rocker Cap with International - Symbols in Horizontal Orientation DPST -NE- Circuit TYPICAL SWITCH ORDERING EXAMPLE R A arrier Types R No arrier With arrier Note: JWMW & JWLW combine with code R only. Cap Colors A lack Ivory C Red H Gray Note: JWMW & JWLW available with black or red caps only. Inscription Orientation No No Inscription Code Horizontal Vertical These are inscriptions for Single Throw models only. DESCRIPTI FOR TYPICAL ORDERING EXAMPLE JWLWRAA A A H A H Housing Colors lack Ivory Gray Note: JWMW & JWLW available with black only. lack Housing arrier Colors lack Ivory Gray Note: Wire harness & cable assemblies offered only in Americas IMPORTANT: Standard markings for JWM & JWL: TV Rating, UL, CSA & VDE. Standard marking for JWLW: culus. Specific models, ratings, & ordering instructions for international approvals are noted on General Specifications page. /0V AC nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

40 High Inrush 0 & Amp Rockers Series JW M Power Level /0V AC Panel Seal Power Level /0V AC L Pole SP SP DP DP R Power Level Model JWM JWMW JWL JWM JWMW JWL JWM JWMW JWL JWLW JWM JWMW JWL JWLW No arrier /0V AC RATINGS MW Rocker Position Connected Terminals Throw & Schematics Down Center Up Down Center Up Note: Terminal numbers are not actually on the switch. Actuator positions oriented with switch part number facing front. NE -b OPEN OPEN SPST NE -b OPEN -a SPDT NE NE No-barrier type has a flat flange which is an integral part of the switch. JWMW and JWLW panel seal devices have exterior seal of acrylonitrile butadiene rubber covering the flange. POLES & CIRCUITS -b -b -b -b OPEN OPEN DPST OPEN -a -a ARRIER TYPES & COLORS DPDT arrier type designates that either AT7 (for JWM) or AT8 (for JWL) is factory assembled. Dimensions for barriers are shown in the Accessories section. Flange/Housing Material: Polyamide Finish: Matte arrier Material: Polyamide Finish: Matte With arrier arrier Colors Available: Panel Seal Power Level /0V AC JWM JWL JWM JWL Cap Material: Polyphenelene Oxide Cap Colors LW CAP COLORS a a (COM) b (COM) b (COM) b (COM) A lack H Ivory Gray Available: A C H lack Ivory Red Gray Rocker cap is an integral part of the switch and not available separately. Finish: Matte JWMW and JWLW available with black or red caps only. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ a b b b Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

41 Series JW High Inrush 0 & Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons No Code No Inscription DPST models without inscriptions do not have VDE approval. Material: Polyamide Finish: Matte JWM & JWMW Epoxy Seal (0.) R.0 (.).0 Thk = (0.).00 INSCRIPTIS Inscription for Horizontal Mounting lack TERMINALS A H Ivory Inscription for Vertical Mounting The IEC symbols for On-Off are supplied with Single Throw models only. Orientation of inscription must be selected. Inscription Colors: lack ink on Ivory or Gray cap. White ink on lack or Red cap. Contact factory for other inscriptions. Colors Available: Solder Lug/Quick Connect.0 (.8mm) Panel Thickness Range Without arrier (JWM & JWMW):.09 ~.7 (.0mm ~.0mm) With arrier (JWM):.0 ~. (0.mm ~.mm) Panel Thickness Range Without arrier (JWL & JWLW):.09 ~.7 (.0mm ~.0mm) With arrier (JWL):.0 ~. (0.mm ~.mm) HOUSING JWMW and JWLW panel seal models available with black housing only. (.8).0 (0.) R.0 JWMW Gray (.). (7.) Epoxy Seal (7.).9.9 (.) R JWL & JWLW.09 PANEL CUTOUTS JWM JWL (.).0 (0.).807 Solder Lug/Quick Connect.87 (.7mm) (.0).9 (9.). (.7).87 Thk = (0.8).0 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ JWLW (.).0 (0.).807 (.0).98 (0.7).09

42 High Inrush 0 & Amp Rockers Series JW (9.).77 (9.).77 (9.).77 (.). (8.0).709 (.). (.0).87 Part No. (.). (8.0).709 (.).87 Part No. Part No. TYPICAL SWITCH DIMENSIS FOR JWM & JWMW (.0).98 (.). (.0).079 (.). (.0).8 (.0). (7.).8 (7.0).7 (.).8 (8.9).7 (.).8 Single & Double Pole (7.).9 Single & Double Pole (7.).9 Single & Double Pole (7.).9 (7.7) Typ.0 (.).890 (0.) Typ.00 (7.7) Typ.0 (.).890 (0.) Typ.00 (7.7) Typ.0 (.).890 (0.) Typ.00 No arrier 0 Amp JWMRCA With arrier 0 Amp JWMCA-H Panel Seal No arrier 0 Amp Single pole double throw models do not have terminals a,, & b; single throw models do not have a & a. b COM a b COM a b COM a (.0).9 (.). (.).0 (.0).9 (.). (.).0 (.0).9 (.). (.).0 b COM a b COM a b COM a (7.0).0 (.8) Typ.0 (0.0).8 (.8) Typ.0 (9.). (.8) Typ.0 JWMWRCA nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

43 Series JW High Inrush 0 & Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons No arrier Amp With arrier Amp TYPICAL SWITCH DIMENSIS FOR JWL & JWLW (.).9 (9.0). Single & Double Pole (9.8) Typ.8 (8.0).0 JWLCA-H Single pole double throw models do not have terminals a,, & b; single throw models do not have a & a. Panel Seal Amp Inscription JWLWRAA (.).9 (.).9 (7.).9 (7.).9 (.0).90 (7.).07 (7.).9 (.0).90 Part No. (7.0).0 Part No. Part No. (0.).79 (0.).79 (.7).0 (.0).079 (7.9). Single & Double Pole (7.0).7 (8.). (.).8 (.).89 (7.).9 (7.).9 (9.8) Typ.8 (8.0).0 JWLRCA Single pole double throw models do not have terminals a,, & b; single throw models do not have a & a. (0.8) Typ.0 Double Pole Single Throw (0.8) Typ.0 (9.8).8 (8.0).0 b b COM a b COM a (0.0).787 (9.0). (0.).807 b COM a b nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.0).9 (7.).9 (0.8) Typ.0 COM a (0.0).787 (9.0). (0.).807 (9.0). (0.0).787 b COM a COM a (.0).0 (.7) Typ.87 (.0).78 (.7) Typ.87 (.7) Typ.87 (7.).9

44 High Inrush 0 & Amp Rockers Series JW (.).9 Notes (7.).9 (.).87 (7.0).0 Part No. (8.).9 (.).0 OPTIAL DUST COVER AT Dust Cover for JWL Rocker When installed, the Dust Cover protects the switch from an environment containing small particles and dust. The switch is operable with the Dust Cover in place. Materials: Lid: Clear Polyvinyl Chloride ase: lack Polyamide Recommended Panel Thickness:.0 ~. (0.8mm ~.mm) (.0).99 Top Side ottom. The dust cover is not for use with JWLW.. The dust cover cannot be used with the barrier option. TYPICAL SWITCH DIMENSIS FOR JWLW Double Pole Double Throw (0.).79 (7.9). (.7).0 (.).89 (7.).9 (0.8) Typ.0 (9.8) Typ.8 (8.0).0 Recommended Temperature Range: 0 ~ +70 C (+ F ~ +8 F) Loses pliability below 0 C (+ F) (.0). Lid b COM a Panel Seal Amp No Inscription b (9.0). (0.0).787 COM a (.7) Typ.87 (7.).9 Assembly Instructions:. Insert bottom of switch through the base until the tabs lock into place.. Snap the switch into the panel.. Seat the lid into the grooves of the base. Switch nkk 开关代理商全国统一热线 北京 上海 JWLWRAA Groove Groove ase Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

45 Series JW High Inrush 0 & Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons PRECAUTIS FOR HANDLING & STORAGE FOR JWMW/LW (PANEL SEAL TYPES) Operating Environment Do not install switch where heavy dust collection occurs. Dust build-up under rocker may affect switch actuation. Do not actuate switch if submerged in water or oil. Installation is not recommended on horizontal surface in an environment where frequent splashing of water may occur. In such an environment, a minimum 0 angle installation is advisable. If there is a possibility of freezing, install vertically so no moisture will be retained within switch housing. Panel Mounting efore snapping a switch into the panel, align the gasket evenly under bezel of the switch. When mounting into a panel, apply equal pressure to sides of bezel and insert parallel to panel. After mounting a switch, be sure there are no gaps between switch and panel. Lightly push into panel. After installing into panel, do not apply excessive force. After panel installation and wiring is completed, do not apply force horizontally or vertically from behind panel. Incorrect ehind the panel, cut area should be squared. If front of panel is painted, do not allow any paint to collect in corners of cutout to prevent level mounting. Avoid reinstalling a switch once it has been mounted in a panel. This may cause deterioration of panel sealability. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Correct 0 Clean Edges

46 Series JWS Internationally Approved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: /0V AC /0V AC (UL/CSA) A /0V AC (VDE) Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: 0 milliohms maximum 00 megohms 00V DC,000V AC minimum between contacts for minute minimum;,000v AC minimum between contacts & case for minute minimum 0,000 operations minimum 0,000 operations minimum Mechanical Life: Electrical Life: Nominal Operating Force: Single Pole.9N & Double Pole.9N Angle of Throw: 0 Materials & Finishes Rocker: Housing/Case: Movable Contactor: Movable Contacts: Stationary Contacts: End Terminals: Common Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Installation Humidity: Vibration: Shock: Sealing: Soldering: Cleaning: Polyphenylene ether (UL9V-0) Polyamide (UL9V-0) Copper with silver plating Silver Silver rass with silver plating Copper with silver plating Phosphor bronze with tin plating (illuminated models only) C through +70 C ( F through +8 F) for nonilluminated models; C through +0 C ( F through + F) for illuminated models 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minutes; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Dust resistant inner seal Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand cleaning locally using alcohol based solution. Standards & Certifications Flammability Standards: UL9V-0 for rocker & housing/case UL: File No. E All JWS models recognized at /0V AC CSA: File No. 0_0_000 All JWS models certified at /0V AC VDE: License No. 9 All JWS models approved at A /0V AC nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

47 Internationally Approved Rockers Series JWS Distinctive Characteristics Rocker caps and housing available in a variety of colors. Protective barrier available to prevent accidental actuation. Constructed for dust resistance with interior cover of polyamide between actuator and contact area. Easy, crisp actuation. Small size well suited for telecommunication, measuring, automation, and consumer applications. Terminals are molded in to lock out flux, dust, and other contaminants. Outer case of heat resistant resin meets UL9V-0 flammability standard. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

48 Series JWS Internationally Approved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons JW S Circuit S Rating NE /0V AC /0V AC (UL/CSA) A /0V AC (VDE) Poles SPST Nonilluminated & Illuminated DPST Nonilluminated only Note: Wire harness & cable assemblies offered only in Americas DPST -NE- Circuit TYPICAL SWITCH ORDERING EXAMPLE R R arrier Types No arrier With arrier DESCRIPTI FOR TYPICAL ORDERING EXAMPLE lack Rocker Cap JWSRAA A Cap Colors A lack * Ivory C Red * For Nonilluminated only Housing Colors A lack * Ivory * For Nonilluminated only A No Code C D F Spot Illumination A Nonilluminated Red LED Amber LED Green LED arrier Color lack lack Housing/No arrier IMPORTANT: culus & VDE markings are standard on all models. Models & specific ratings are noted on General Specifications page. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

49 Internationally Approved Rockers Series JWS RATING S Power Level /0V AC /0V AC (UL/CSA) A /0V AC (VDE) Pole Model POLES & CIRCUITS Rocker Position Connected Terminals Throw & Schematics Down Center Up Down Center Up SP JWS NE - OPEN OPEN SPST DP JWS NE - - OPEN OPEN DPST R No-barrier type has a flat flange which is an integral part of the switch. ARRIER TYPES & COLORS No arrier With arrier Material: Polyamide Finish: Matte (.) R.07 (0.) R.0 (.7).87 Thk = (0.).00 Cap Material: Polyphenelene Oxide Finish: Matte (.) (.)..7 (.).8 Colors Available: arrier Material: Polyamide Finish: Matte arrier AT9 is factory assembled. Dimensions for barrier are shown in the Accessories section. arrier Color Available: CAP COLORS Note: Terminal numbers are actually on the switch. A lack INTERNAL CNECTI INTERNAL CNECTI Rocker cap is an integral part of the switch and not available separately. * Ivory for nonilluminated models only. Cap Colors Available: A C A HOUSING lack TERMINALS Solder Lug/.87 (.7mm) Quick Connect Switch assembly with connectors is not UL, CSA, C-UL, or VDE approved. lack * Ivory Red Ivory (for nonilluminated models only) Switch Lamp (spot illuminated models only) nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.0).8 (.0).09 Thk = (0.).00 (.0).97 (.8).07 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

50 Series JWS Internationally Approved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons LED COLORS & SPECIFICATIS FOR SPOT ILLUMINATED MODELS LEDs are supplied as an integral part of illuminated devices and are not available separately. LED polarity markings are on the bottom of the switch. The electrical specifications shown here are determined at a basic temperature of C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. JWSRCA Nonilluminated No arrier JWSRAA (.9).08 Nonilluminated No arrier (+) (-) Color Red Amber Green Forward Peak Current I FM ma 0mA 0mA Typical Forward Current I F 0mA ma ma Forward Voltage V F.0V.9V.9V Reverse Peak Voltage V RM V V V Current Reduction Rate Above C I F 0.mA/ C 0.7mA/ C 0.7mA/ C Ambient Temperature Range C ~ +0 C PANEL CUTOUT & PANEL THICKNESS RANGES (.0).9 (.0).9 (9.).7 Panel Thickness Ranges: Without arrier:.00 ~.079 (0.7mm ~.0mm) With arrier:.0 ~.09 (0.mm ~.mm) TYPICAL SWITCH DIMENSIS Part No. (0.).0 (.0).9 Part No. (0.).0 (.0).9 Single Pole 0 (.).8 (.0).079 Double Pole 0 (.).8 (.0).079 (.).09 (.).09 (.0).0 (.0).0 (.).0 (.). (.). (0.) Typ.00 (.)R Typ.07 (0.)R Typ.0 (.). (9.0).78 (.).7 DPST models have IEC symbols for On-Off on the flange. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.7) Typ.87 (.).77 C (9.0).78 D (.).88 (.8).0 (8.). (.).88 (.8).0 (.7).87 F (.0).87 (0.) Typ.00 (.0).87

51 Internationally Approved Rockers Series JWS (.0).9 (.0).9 (.0).9 (.0).9 (.).08 (.).08 (0.).0 (.0).9 (.).0 (0.).0 (.0).9 (.).0 Part No. Part No. Part No. (.0). (0.).0 (.0).9 (0.).0 (.0). (.0).9 (.).0 Part No. (9.).78 (9.).78 (7.0).7 (7.0).7 TYPICAL SWITCH DIMENSIS (.). (.). (.).0 (.). (.). Single Pole (0.) Typ.00 (.). (9.0).78 Double Pole (.)R Typ.07 (0.)R Typ.0 (.).7 (.7) Typ.87 (.).77 (9.0).78 DPST models have IEC symbols for On-Off on the flange. 0 (.).8 (9.).78 (.0).079 (.).09 (7.0).7 (.0).0 (.). (.). (.0).97 (9.). (.). (.0).97 (9.). Single Pole (0.) Typ.00 (.) Typ. (9.0).78 (.).09 (0.) 0.0 Single Pole (0.) Typ.00 (.) Typ. (9.0).78 (.).09 (0.) 0.0 (.8) Typ.07 (.8) Typ.07 (.).88 (.8).0 (0.).807 (8.). (.).88 (.8).0 (0.).807 (.).88 (.0).7 (.8).0 (.).88 (.8).0 (0.).807 (.7).87 (0.) Typ.00 (.7).87 (.0).7 Nonilluminated With arrier (.0).9 (.0).87 JWSA-A Nonilluminated With arrier (.0).9 (.0).87 (.0).87 (.7).87 JWSAA-A Spot Illuminated No arrier JWSRCAF Spot Illuminated With arrier (.0).9 (.0).87 (.0).7 JWSAAF-A nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

52 Series LW Power-Rated Snap-in Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity Resistive Load: V AC, 0V AC, or 0V DC Inductive Load: V AC (P. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength:,00V AC minimum for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum Nominal Operating Force:.77N for maintained & 7.N for momentary Angle of Throw: Materials & Finishes Housing: Movable Contacts: Stationary Contacts: ase: Common Terminal: End Terminals: Lamp Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Cap Installation Force: SolderingTime & Temperature: Standards & Certifications UL: Steel with chrome plating Silver clad copper with silver plating Copper with silver plating Melamine Copper with silver plating rass with silver plating Phosphor bronze with nickel plating 0 C through +0 C ( F through + F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) 9.N (. lbf) Manual Soldering: See Profile A in Supplement section. File No. E - Recognized only when ordered with marking on switch. Add /U or /CUL before first dash in part number to order UL recognized switch. All models recognized at V AC & 0V AC nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

53 Power-Rated Snap-in Rockers Series LW Distinctive Characteristics Each half of the rocker face is distinctly illuminated due to partitioned rocker construction and dual lamps. Numerous lighting effects achievable by using white or clear rocker with colored filters or lamp covers, plus using different colors on each side of rocker. Snap-in mounting allows fast, easy installation of switch into panel. Stainless steel retaining clips provide secure mounting over a wide range of panel thicknesses. Dual incandescent or neon lamps operate independently of each other. Front panel relamping. Stationary lamp sockets are independent of rocker actuation, protecting lamps from damage due to shock and vibration. Switch contacts are rated at 0 amps V AC which makes these devices well-suited for various power switching applications. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

54 Series LW Power-Rated Snap-in Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Pole DPDT LW TYPICAL SWITCH ORDERING EXAMPLE H C F Circuits Up Center Down NE NE () 8 () () 9 () ( ) = Momentary Rocker Caps White without filters or lamp covers White with filters White with lamp covers Clear with filters Note: Wire harness & cable assemblies offered only in Americas DESCRIPTI FOR TYPICAL ORDERING EXAMPLE LW-HCF-A Clear Rocker with Red Filter in Up Position and Green Filter in Down Position DPDT -NE- Circuit Lamps Incandescent E -volt F -volt H 8-volt K -volt L 8-volt Neon N 0-volt Not suitable with green & blue Nonilluminated 0 No Lamp Lamp Cover/ Filter Colors For Up Position 0 No Cover/Filter Lamp Cover C Red D Amber F Green Filter White C Red D Amber E Yellow F Green G lue 8-volt Incandescent Lamp lack ezel A ezel No No ezel Code A lack White C Red D Amber E Yellow F Green G lue H Gray Lamp Cover/ Filter Colors For Down Position 0 No Cover/Filter Lamp Cover C Red D Amber F Green Filter White C Red D Amber E Yellow F Green G lue IMPORTANT: Switches are supplied without UL & culus marking unless specified. UL & culus recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

55 Power-Rated Snap-in Rockers Series LW Pole DP AT0 White Rocker without Filters or Lamp Covers LAMP CODES & SPECIFICATIS Electrical specifications are determined at a basic temperature of C. Lamp circuit is independent of switch operation. For dimension drawing of lamps see Accessories & Hardware section. For neon, if the source voltage is greater than rated voltage, a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in the Supplement section. Neon not for use with green lamp cover or blue and green filters. AT0 Incandescent AT0N Neon T- Pilot Slide ase Model LW LW LW LW8 LW9 Incandescent & Neon Lamps for Solid & Design Caps Voltage V V AC V AC 8V AC V AC 8V AC 0V AC Current I 80mA 0mA ma ma ma.ma MSCP NA Endurance Hours,000 Average,000 Average Ambient Temperature Range 0 C ~ +0 C 0 C ~ +0 C 0 Recommended Resistor for Neon: K ohms for 0V AC; 00K ohms for 0V AC No Lamp Code 0 indicates that no lamp is used. E ROCKER CAPS, LAMP COVER & FILTER AT0 White Rocker with Filters POLES & CIRCUITS Rocker Position ( ) = Momentary Connected Terminals Throw & Power/Lamp Schematics Up Center Down Up Center Down Notes: Terminal numbers are not actually on switch. Lamp circuit is isolated and requires an external power source. () NE NE () () () - - OPEN - - Rocker Cap Material: Polycarbonate F H K AT0 White Rocker with Lamp Covers Finish: Glossy Indicate the lamp cover or filter color desired in both the up and down positions. L AT0J Clear Rocker with Filters AT AT AT AT Lamp Cover AT Filter C Red White E Yellow D Amber C Red F Green F Green D Amber G lue Material: Silicon Rubber Material: Polycarbonate nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ DPDT (COM) L L N L L Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

56 Series LW Power-Rated Snap-in Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons AT0 ezel & Color Codes No Code A lack No ezel AT07 Lamp Extractor C Solder Lug Without ezel LW-FCF Solder Lug With ezel LW-FCF-A (.0).7 (8.8). White Red (9.0).78 (9.0).78 (9.7).77 (9.7).77 EZEL & EZEL COLORS Amber Lamps can be changed without removing the switch from the panel. AT07 assists in removing lamps from the switch. D E Yellow TYPICAL SWITCH DIMENSIS (7.).087 (.0).7 (7.).087 (.).098 (8.). (0.0).9 F G (0.).0 Actuator in UP position (.).0 (7.).07 Green lue (8.7).0 Actuator in UP position LEGENDS (.).77 (.7). (.).77 (.7). (.8) Dia.0 Inscriptions can be placed on the rocker or filter. Details regarding screen printing may be obtained from the factory. (.).0 Material: Polycarbonate (.) Dia Typ.07 (0.8) Typ.07 (.0) x (.) Typ.079 x.0 (0.) Typ.0 (9.) Typ.70 (.) Dia Typ.07 (0.8) Typ.07 (.0) x (.) Typ.079 x.0 (0.) Typ.0 (9.) Typ.70 OPTIAL ACCESSORY H Gray (0.0).8 (0.0).8 L L L L (.0).9 (0.0).787 (.0).9 L L L L (.0).8 (8.8). (.0).8 (.0) Dia.97 (.0). (.0). (9.8).780 (9.8).780 (9.).7 (.0).0 Panel Thickness.09 ~.7 (.0mm ~.0mm) (.0).0 Panel Thickness.09 ~.8 (.0mm ~.0mm) nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

57 High Capacity Screw Mount Rockers Electrical Capacity & Other Ratings GENERAL SPECIFICATIS Resistive Load: 0V AC Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum Operating Temperature Range: 0 C through +0 C (+ F through + F) Nominal Operating Force:,0 grams Angle of Throw: Materials & Finishes Rocker: Mounting Frame: Movable Contacts: Stationary Contacts: ase: Common & End Terminals: (.0).77 Model (8.0).9 (.). (8.).78 Pole (7.0).0 (.9) (.0).. (9.).78 (.0).09 M P0. (.). (.7). Polycarbonate resin Steel with chrome plating Silver alloy Copper with silver plating Melamine rass with tin plating SINGLE POLE HIGH CAPACITY Rocker Position Connected Terminals Throw & Power/Lamp Schematics Up Center Down Up Center Down Notes: Terminal numbers are on switch. Lamp circuit is synchronous to switching circuit. LW0A DP NE - - OPEN OPEN DPST Neon Lamp Specifications. x.98 (.9mm x.0mm) window is translucent red. Neon lamp with built-in ballast resistor is integral part of switch. Voltage V 90-0V AC Internal Series Resistance 00K ohms Current I 0.8mA Endurance 0,000 hours minimum screws supplied for flush panel mounting. (.) Dia Typ.09 (.).8 L o a d Maximum Panel Thickness: Actuator in UP position.97 (.0mm) LW0A nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Neon Lamp (0.8) Typ.0 (.8) Typ.89 Source (.0). (.) Dia Typ.8 (8.0).0 (8.0).9 Series LW Since this is a double break device, one side of the electrical source should be connected to terminal and the other side to terminal. The electrical load should be connected between terminals and. Supplement Accessories Touch Tilt Programmable Illumin Other Illuminated P Keylocks Rotaries Tactiles Slides Pushbuttons Rockers Toggles

58 Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over silver): Other Ratings V AC & 0V AC 0V DC for On-None-On; 0V DC for all other circuits 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Contact Resistance: 0 milliohms maximum for silver; 0 milliohms maximum for gold Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum between contacts for minute minimum;,00v AC minimum between contacts and case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum for silver; 0,000 operations minimum for gold; 0,000 operations minimum for silver at V AC Angle of Throw: Materials & Finishes Actuator Clip & Mounting Frame: Stainless Steel ody Frame: Stainless steel Case: Diallyl phthalate resin (UL9V 0) Movable Contactor: Phosphor bronze with silver or gold plating Movable Contacts: Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Stationary Contacts: Silver with silver plating (code W); copper or brass with gold plating (code G); or silver with gold plating (code A) Terminals: Copper or brass with silver plating; or copper or brass with gold plating Environmental Data Processing Operating Temp Range: Humidity: Vibration: Shock: Soldering: Cleaning: Standards & Certifications 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering (PC version) for Gold: See Profile A in Supplement section. Manual Soldering for Gold: See Profile A in Supplement section. Wave Soldering (PC version) for Silver: See Profile in Supplement section. Manual Soldering for Silver: See Profile in Supplement section. Note: Actuator must be in (center) position while soldering. These devices are not process sealed. Hand clean locally using alcohol based solution. Flammability Standards: UL9V 0 for case UL: File No. E - Recognized only when ordered with marking on switch. Add /U before first dash in part number to order UL recognized switch. All models recognized at V AC, 0V AC or 0.VA 8V DC maximum. CSA: File No. 0_0_000 - Certified only when ordered with marking on switch. Add /C before first dash in part number to order CSA certified switch. All models certified at V AC or 0V AC or 0.VA 8V maximum. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

59 Miniature Rockers Series M Distinctive Characteristics Three methods of panel mounting: flat frame for flush with face or subpanel, snap-in, and PC. High insulating barriers increase isolation of circuits in multipole devices and provide added protection to contact points. The molded diallyl phthalate case has a UL 9V-0 flammability rating. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Prominent external insulating barriers increase insulation resistance and dielectric strength. ias guard prevents misalignment of contacts; interlocking of actuator block with rocker and internal guide does not allow transmission of diagonal force on rocker to reach contact mechanism. Clinching of the frame to the case well above the base and terminals provides,00v dielectric strength. Actual Size Snap-in Mount racket PC Mount Flat Frame Mount nkk 开关代理商全国统一热线 北京 上海 Page Page 7 Page 8 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

60 Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Series M M0 Poles SPDT DPDT SPT Circuits NE NE () 8 () () 9 () * * () () * 7 () ( ) = Momentary * - circuits Mounting Frame TJ Snap-in Frame W G A Red.0 (.mm) Wide Rocker SPDT -NE- Circuit Solder Lug Terminals TJ W 0 F C Terminals 0 Solder Lug* 0 Quick Connect 0.0 (.mm) Straight PC 0. (0.8mm) Wirewrap 0.70 (9.0mm) Wirewrap 07.9 (.mm) Wirewrap 08.0 (7.0mm) Wirewrap Contact Materials & Ratings Silver; Rated V AC & 0V AC Gold; Rated 0.VA 8V AC/DC max Gold over Silver; Rated V AC & 0.VA 8V AC/DC max F G DESCRIPTI FOR TYPICAL ORDERING EXAMPLE M0TJW0-FC-A nkk 开关代理商全国统一热线 S Snap-in Frame TYPICAL SWITCH ORDERING EXAMPLE Rockers & Paddles.0 (.mm) Wide Rocker.0 (.mm) Wide Paddle. (.mm) False Illluminated Rocker in lack only Silver Contacts with Amp Rating Rocker & Paddle Colors A lack White C Red E Yellow F Green G lue H Gray * Wire harness & cable assemblies offered only in Americas lack ezel without LED 北京 Optional ezels ezel without LED A Snap-in Frame SPDT -NE- Circuit Silver Contacts with Amp Rating Solder Lug Terminals A C E F G H ezel Colors lack White Red Yellow Green lue Gray ezel with Round LED A lack ezel with Round LEDs ezel with Rectangular LEDs IMPORTANT: Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. Red.0 (.mm) Wide Rocker A lack DESCRIPTI FOR TYPICAL ORDERING EXAMPLE M0TJW0-FC-A-CF Snap-In Mount Miniature Rockers C F Top LED Red ottom LED Green lack ezel with Round LEDs LED Colors LED Red Green LEDs Top LED ottom LED C Red C Red E Yellow E Yellow F Green F Green 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

61 Series M Snap-In Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Pole SP DP For Throw (-On) Connected Terminals & Schematic Pole Model Down Center Up External Connection SP TJ (8.0).70 W G A Model M0 M0 M0 M08 M09 M0 M0 M07 Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up () () NE NE () () () M0 NE M0 M0 NE () M08 () () M09 () Snap-in Frame (.).80 POLES & CIRCUITS - OPEN OPEN - - () () MOUNTING FRAME Note: Terminal numbers are not actually on the switch. SPDT DPDT The SPT model utilizes a double pole base. External connection must be made during field installation. External Conn (COM) (out) (out) (COM) Panel Thickness without ezel:.09 ~. (.0mm ~.mm) Panel Thickness with ezel:.09 ~.098 (.0mm ~.mm) CTACT MATERIALS & RATINGS Silver over Silver Power Level V AC & 0V AC Gold over rass or Copper Logic Level 0.VA 8V AC/DC maximum Gold over Silver External Connection (in) (out) (out) (out) (.) Dia.00 (.).70 External Connection (in) (out) (out) (out) Panel Cutout for Single Pole without ezel Note: See Supplement section to find complete explanation of operating range. Power Level or Logic Level External Connection (in) (out) (out) (out) Panel Cutout for Double Pole without ezel (out) Common (in) V AC or 0.VA 8V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.).9 (.9). (.). (.9).

62 Snap-In Mount Miniature Rockers Series M F TERMINALS Solder Lug 0.0 (.mm) Straight PC Epoxy Seal (.0).079. (0.8mm) Wirewrap or Extended PC.70 (9.0mm) Wirewrap or Extended PC.9 (.mm) Wirewrap or Extended PC.0 (7.0mm) Wirewrap or Extended PC AT0.0 (.mm) Wide Rocker Material: Polyamide Finish: Matte Colors Available: A,, C, E, F, G, H S AT. (.mm) False Illuminated Rocker (9.9). (.).0 Thk = (0.8).0 (.0).7 (.0).079 Epoxy Seal (.) (.8).0.89 (.7).0 Thk = (0.8).0 Epoxy Seal Thk = (0.8).0 ROCKERS & PADDLES (7.) (.).80.8 A (.7).00 Rocker False Illuminator Material: Polycarbonate Acrylonitrile utadiene Styrene Finish: Glossy Colors: lack White and Red.0 (.7mm) Wide Quick Connect (.7) Typ.8 (.8) Dia Typ.07 Single Pole If using as extended PC terminal, refer to the above footprints. Dimension A = AT.0 (.mm) Wide Paddle Epoxy Seal Double Pole Thk = (0.8).0 (.8).89 (.7) Typ.8 (.8) Dia Typ.07 (.).0 (.7).0 terminal lengths as shown beside the terminal codes at the left. Cap Colors Available: A C E F G H lack White Red Yellow Green lue Gray nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ G Material: Polyamide Finish: Matte Colors Available: A,, C, E, F, G, H When a bezel is selected with AT, glossy polycarbonate AT07 is supplied. (.).0 (.8).07 (.8). (8.).9 (.). (.).09 (.).0 (.). (.8). (.). (.8) R.0 (.8). (7.7).0 (.8).07 (.8).07 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

63 Series M Snap-In Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons AT07 ezel Material: Polyamide Finish: Matte AT08 ezel for AT070 LED Material: Polycarbonate Finish: Glossy Contact factory for matte finish. AT ezel for AT7 LED Material: Polycarbonate Finish: Semi-glossy AT ezel for AT8 LED Material: Polycarbonate Finish: Semi-glossy. Pry out tab on bezel to a angle. Tab Tab (9.0).78 (.). (8.0). (.0) Typ.079 (8.0). OPTIAL SNAP-IN EZELS & EZEL COLORS (.). (.). (.) Dia. (0.0).9 (0.0).9 (.0) Dia Typ.8 (.0) Typ.97 (.8). (.0).7 (.).8 (.8). (0.).9 (.0).7 (.0).7 (.).087 (.0).7 (.).087 (.).087 (7.8).07 (.8). (.) Sq.8. Insert switch frame under tab and snap on bezel. (.).087 (7.8).07 (.8). (.) Sq.8 A C E A ezel Assembly lack White Red Yellow lack A A F G H lack lack Green lue Gray LED colors & specifications on next page. A Single Pole (.)mm.9 (.)mm. LED colors & specifications on next page. LED colors & specifications on next page. Double Pole (.)mm. (.)mm.8 (.9).. Push tab back into place.. Snap assembled bezel and switch into panel. A A A A Single Pole (.)mm.9 (.9). A Single Pole (8.)mm.7 A Single Pole (8.)mm.7 A Double Pole (.)mm. (8.8) Dia. (.8). (.9). Double Pole (8.7)mm.7 (.9). Double Pole (8.7)mm.7 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

64 Snap-In Mount Miniature Rockers Series M AT070 LED For ezel AT08 with LED Circuit Mark This Side (+) (+) (-) Top LED ottom LED Circuit Mark This Side Top LED ottom LED AT070 AT7 AT8 Color Red Green Red Yellow Green Red Yellow Green Forward Peak Current I FM ma 0mA 0mA 0mA ma 0mA 0mA 0mA Typical Forward Current I F 0mA 0mA 0mA 0mA 0mA 8mA ma ma Forward Voltage V F.8V.V.0V.V.V.9V.0V.V Reverse Peak Voltage V RM V V V V V V V V Current Reduction Rate 0. Above C I F ma/ C Ambient Temperature Range (when used with a bezel) (-) (.08) Dia.00 (7.7).0 LED COLORS & SPECIFICATIS ezel Orientation on Switch AT7 LED For ezel AT with Round LEDs 0.0 ma/ C 0.0 ma/ C 0.0 ma/ C AT8 LED For ezel AT with Rectangular LEDs Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+). C F 0. ma/ C Circuit Mark This Side 0. ma/ C 0.0 ma/ C 0 ~ +70 C ~ +70 C ~ +70 C The electrical specifications shown are determined at a basic temperature of C. LED circuit is independent of switch operation. LED is colored in state. If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the lamp. The ballast resistor calculation and more lamp detail are shown in the Supplement section. (+) C LEGENDS (.0) Dia.8 NKK Switches can provide custom legends for caps. Contact factory for more information. Recommended Print Method: Pad Print (.0).97 Suggested Printable Area for Cap (-) E F C E (+) (.0).97 (-) (7.0).7 F 0.0 ma/ C Epoxy based ink is recommended. AT0 Shaded areas are printable areas. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.) Typ.77 (0.7) Typ.00 (9.9).90 (.).0 (0.8) Typ.0 (0.7) Typ.00 (.) Typ. Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

65 Series M Snap-In Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Snap-in Frame Solder Lug M0TJW0-FC Snap-in Frame Solder Lug M0TJW0-FC Snap-in Frame Solder Lug M0TJW0-GC Snap-in Frame Solder Lug M0TJW0-GC (8.0).709 (8.0).709 (8.0).709 (8.0).709 (.).0 (.).80 (.).0 (.).80 (.).0 (.).80 (.).0 (.).80 TYPICAL SWITCH DIMENSIS (.).09 (.).09 Single Pole (.).0 (.9).9 (.8).0 (0.).00 (7.).79 Double Pole (.).0 (.9).9 Single Pole (.8). (.7).9 (.8).0 Double Pole (.8). (.7).9 (.8).0 (0.).00 (7.).79 (.8).0 (0.).00 (7.).79 Circuit Mark This Side (9.).7 (0.).00 (7.).79 (.).77 Circuit Mark This Side (9.).7 (.).77 (9.).7 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.).00 Circuit Mark This Side Circuit Mark This Side (9.).7 (.) x (.0) Typ.0 x.079 (0.8) Typ.0 (0.).00 (.).77 (.).77 (.7) Typ.8 (.) x (.0) Typ.0 x.079 (0.8) Typ.0 (0.).00 (.7) Typ.8 (.) x (.0) Typ.0 x.079 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (0.).00 (.7) Typ.8 (0.8) Typ.0 (7.9). (.8).89 (7.9). (.7).00 (.8).89 (.7).00 (.0). (.0) Typ.079 (.0). (.0) Typ.079 (.0). (.0) Typ.079 (.0). (.0) Typ.079

66 Snap-In Mount Miniature Rockers Series M (.0).7 (.).8 (0.).90 (8.0). (.0) Dia Typ.8 (8.0). (.0) Typ.97 (.0).079 (.08) Dia.00 (.0).7 (.).0 (.8). (.). (.).0 (.8). (.). (0.0).9 (7.8).07 (.).0 (.8). (.) Sq.8 (0.0).9 (7.8).07 (.).0 (.8). (.) Sq.8 (.0).8 (9.0).78 (.). (.0).7 (.0).7 (.). (.).9 (.).087 (.). (.0).8 (.0).8 (.0).8 (.). (.). TYPICAL SWITCH DIMENSIS Single & Double Pole Circuit Mark This Side (9.).7 (.).77 Double Pole (.9).9 (.) Min.0 (.).9 (.).087 (.). Single Pole (.).9 (.).087 (.). (0.).00 Double Pole (.).9 (.).087 (.). (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 Circuit Mark This Side (9.).7 Circuit Mark This Side (9.).7 (.).77 Circuit Mark This Side (9.).7 (.).77 (.).77 (0.) Sq.0 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.).00 (.) x (.0) Typ.0 x.079 (0.).00 (.7) Typ.8 (0.8) Typ.0 (.) x (.0) Typ.0 x.079 (0.).00 (7.9). (.7) Typ.8 (0.8) Typ.0 (.0).079 Snap-in Frame AT07 ezel Solder Lug (.0). (.0). M0TJW0-FC-A Snap-in Frame AT08 ezel Solder Lug (.8).89 (.7).00 (.).098 (.0). (.0). (.0) Typ.079 M0TJW0-FC-A-C Snap-in Frame AT ezel Solder Lug (7.9). (.0).079 (.0). (.0). M0TJW0-FC-A-CF Snap-in Frame AT ezel Solder Lug (.8).89 (.7).00 (.8).89 (.7).00 (.0) Typ.079 (.0) Typ.079 (.0). (.0). (.0). (.0). M0TJW0-FC-A-CF nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

67 Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 racket PC Mount Miniature Rockers Series M M0 Poles SPDT DPDT SPT PDT (used only with terminal codes 0 & & frame code TX) PDT DPT (used only with terminal code & frame code TX) TYPICAL SWITCH ORDERING EXAMPLE TX G SPDT -- Circuit TX Frame with. (9.7mm) Wide Red Rocker Circuits NE NE () 8 () () 9 () * * () () * 7 () ( ) = Momentary * - circuits Mounting Frames TX Narrow Frame for Small Actuator TZ Wide Frame for Large Actuator DESCRIPTI FOR TYPICAL ORDERING EXAMPLE M0TXG-DC nkk 开关代理商全国统一热线 W G A Gold Contacts with 0.VA Rating Contact Materials & Ratings Silver; Rated V AC & 0V AC Gold; Rated 0.VA 8V AC/DC max Gold over Silver; Rated V AC & 0.VA 8V AC/DC max.0 (.8mm) Vertical PC Terminals with Support 北京 Terminals For TX & TZ Frames Straight PC with racket (- Pole only).0 (.mm) Straight PC with. (.8mm) racket. (0.8mm) Straight PC with.0 (.0mm) racket.9 (.mm) Straight PC with 7.0 (9.mm) racket Straight PC with Reinforced racket (- Pole only).0 (.mm) Straight PC with. (.8mm) racket. (0.8mm) Straight PC with.0 (.0mm) racket.70 (9.0mm) Straight PC with.9 (.mm) racket Terminals For TX Frame Only Right Angle PC with Support (- Pole only) 0.0 (.8mm) Right Angle PC Vertical PC with Support (- Pole).0 (.8mm) Vertical PC TZ Frame with.9 (.mm) Wide Red Rocker DPDT -NE- Circuit D E F G J H D Rockers & Paddles Small Actuators (TX Frame). (9.7mm) Wide Rocker. (9.7mm) Wide Paddle.0 (.mm) Wide Rocker.0 (.mm) Wide Paddle Large Actuators (TZ Frame).9 (.mm) Wide Rocker.9 (.mm) Wide Paddle DESCRIPTI FOR TYPICAL ORDERING EXAMPLE M0TZG-JC C IMPORTANT: Gold Contacts with 0.VA Rating.0 (.mm) Straight PC Terminals with Reinforced racket Rocker & Paddle Colors A lack White C Red E Yellow F Green G lue H Gray Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

68 Series M racket PC Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Pole SP DP P P Model M0 M0 *M0 M08 *M09 M0 M0 *M0 M08 *M09 M0 M0 *M0 M08 *M09 M0 M0 *M0 M08 *M09 Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up () () () () NE NE NE NE NE NE NE NE () () () () () () () () () () () () POLES & CIRCUITS - OPEN OPEN OPEN OPEN For Throw (-On) Connected Terminals & Schematics Note: Terminal numbers are not actually on the switch. * Reverse circuits available for vertical mount SP & DP upon request. SPDT DPDT PDT PDT (COM) 8 (COM) (COM) 9 (COM) Pole Model Down Center Up Down Center Up SP DP M0 M0 M07 M0 M0 M07 () () The SPT model utilizes a double pole base. External connection must be made during field installation. () () () () External Conn (out) (out) (out) (out) (out) (out) External Connection (in) External External Connection Connection (in) 8 (in) (out) (out) (out) 7 (out) 9 0 (out) (out) Common (in) External Connection (in) (out) (out) (out) External External Connection Connection (in) 8 (in) (out) (out) (out) 7 (out) 9 0 (out) (out) The DPT model utilizes a four pole base. External connection must be made during field installation. External Conn Common (in) (out) 0 (out) (out) 7 7 External Connection (in) (out) 9 8 (out) (out) (out) (out) (out) (out) (out) 7 (out) 9 0 (out) (out) External External Connection Connection (in) 8 (in) 0 Common (in) (out) nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

69 racket PC Mount Miniature Rockers Series M TX W G A (8.0). TZ MOUNTING FRAMES Narrow Mounting Frame for Small Actuators with Straight PC Terminals (codes,, 7,,, & ) or with Angle PC Terminals (codes 0 & ) Straight PC Mounting Right Angle PC Mounting Vertical PC Mounting (.) Dia.00 (.).8 Small Actuators & Panel Cutouts for TX Frame (actuator details on the following pages) AT8 AT9 AT0 AT Wide Mounting Frame for Large Actuators with Straight PC Terminals (codes,, 7,,, & ) CTACT MATERIALS & RATINGS Silver over Silver Power Level V AC & 0V AC Gold over rass or Copper Logic Level 0.VA 8V AC/DC maximum Gold over Silver (.) Dia.00 (.).8 (0.).98 (7.8).70 (.08).00 (.) Typ.0 AT Note: See Supplement section to find complete explanation of operating range. Power Level or Logic Level (0.) Typ.0 (.08).00 Large Actuators & Panel Cutouts for TZ Frame (actuator details on the following pages) V AC or 0.VA 8V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. (.) Dia.00 (.7).7 AT7 nkk 开关代理商全国统一热线 北京 上海 Direction of Actuation (.) Dia.00 (.0).0 (.).90 (.7).08 (.0). (.7).00 (8.). (.7).00 Direction of Actuation Direction of Actuation Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

70 Series M racket PC Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons.0 (.mm) Terminal with. (.8mm) racket 0 D AT8. (9.7mm) Wide Rocker Material: Polyamide Finish: Matte F For TX and TZ - Pole Straight PC Mount with racket TERMINALS 7. (0.8mm) Terminal with.0 (.0mm) racket AT0.0 (.mm) Wide Rocker Material: Polyamide Finish: Matte.9 (.mm) Terminal with.0 (9.mm) racket.0 (.mm) Terminal with. (.8mm) racket PC footprints are on the following Typical Switch Dimension pages. For TX - Pole Right Angle PC Mount.0 (.8mm) Right Angle PC ROCKERS & PADDLES FOR TX MOUNTING FRAMES (9.7). (.).0 (7.9). (.). (8.) (.).9.8 (.87). (.9). (.8). (9.9). (7.7).0 (8.8). (.).8 (.).8 AT9. (9.7mm) Wide Paddle Cap Colors Available: A C E F G H lack White Red Yellow Green lue Gray nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ E Material: Polyamide Finish: Matte G For TX and TZ - Pole Straight PC Mount with Reinforced racket. (0.8mm) Terminal with.0 (.0mm) racket AT.0 (.mm) Wide Paddle Material: Polyamide Finish: Matte For TX - Pole Vertical PC Mount.0 (.8mm) Vertical PC (9.7). (.).0.70 (9.0mm) Terminal with.9 (.mm) racket (8.8).70 (.). (.).08 (.8). (.8). (.).09 (.9). (.8). (8.) R. (.).8 (.8) R.0 (.).8

71 racket PC Mount Miniature Rockers Series M J AT.9 (.mm) Wide Rocker Material: Polyamide Finish: Matte (.).9 Cap Colors Available: (8.) (.).. A ROCKERS & PADDLES FOR TZ MOUNTING FRAMES (.78).0 lack AT0- Accommodates.07 ~.090 (. ~.mm) panel thickness Material: Polyamide Finish: Matte Color: lack Mounted separately from switches Cutout Tolerances: Dimension A:.797 ~.80 (0. ~ 0.mm) Dimension :.9 ~.0 (.7 ~.8mm) AT0- Accommodates.07 ~.090 (. ~.mm) panel thickness Material: Polyamide Finish: Matte Color: lack Mounted separately from switches (.0).90 White (.0). (.).8 C Red Yellow OPTIAL SNAP-IN PANEL FRAMES E H AT7.9 (.mm) Wide Paddle Material: Polyamide Finish: Matte (.). (.).9 Used with AT8 Rocker and AT9 Paddle AT0- Accommodates.0 ~. (.7 ~.8mm) panel thickness A Used with AT0 Rocker and AT Paddle AT0- Accommodates.0 ~. (.7 ~.8mm) panel thickness A F (9.8).7 Green (.). (.). G (7.9).70 (.8). AT0 Enlarged Detail Cutout Tolerances: Dimension A:.9 ~.0 (. ~.7mm) Dimension :.9 ~.00 (.7 ~.7mm) AT0 Enlarged Detail AT0 Enlarged Detail nkk 开关代理商全国统一热线 北京 上海 (.8).0 (.8). (.).09 (.8).0 lue (.7).87 (9.).7 (.) R. H (.0).7 (7.).87 (.).8 (9.9).90 (.0).98 Gray (.).090 (.).090 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

72 Series M racket PC Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Straight PC racket M0TXG-DC Terminal Code: Straight PC Reinforced racket M0TXG-DC Terminal Length: TYPICAL SWITCH DIMENSIS racket Length:.0 (.mm). (.8mm). (0.8mm).0 (.0mm) 7.9 (.mm).0 (9.mm) Terminal Code: Terminal Length: (.). (.).8 TERMINAL LENGTH (0.) Typ.00 (0.8) Typ.0 (.7) Typ.8 (.). (.).8 TERMINAL LENGTH (0.) Typ.00 (0.8) Typ.0 (.7) Typ.8 racket Length:.0 (.mm). (.8mm). (0.8mm).0 (.0mm).70 (9.0mm).9 (.mm) (.8). (9.0).70 (8.8). Circuit Mark This Side (8.8). Circuit Mark This Side Single Pole (.) Typ.0 (7.9) Typ. (.7) Typ.8 (.7) Typ.0 (.7) Typ.0 (.8) Dia Typ.07 (.) Dia Typ.09 Single Pole (.8) Typ. (.7) Typ.0 (.7) Typ.0 (9.) Typ.7 (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 (8.0). (9.).8 (.7).00 (.7).00 Double Pole RACKET LENGTH (.8) Typ.89 (.8).89 (.) Typ. (.) Typ.0 (.) Typ.09 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 Double Pole RACKET LENGTH (.8) Typ.89 (.) Typ.0 (.8).89 (.) Typ.09 (.8) Typ. (9.) Typ.7 (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ C L C L

73 racket PC Mount Miniature Rockers Series M (.). (.8). (.) Typ.0 (.08).00 (.). (.8). (.) Typ.0 (.08).00 (8.8). (.8). (.) Typ.0 (.08).00 Shown in Down Position Shown in Down Position Shown in Down Position (9.7). (9.7). (9.7). (.). (8.8). (.). (8.8). Pivot Pivot (0.).0 (.) (.). (8.8). Pivot TYPICAL SWITCH DIMENSIS Single Pole.7 (.0).7 Double Pole (0.) Typ.0 (.0).7 (.7).00 (.7).00 Three Pole (0.).0 (.).77 (.). (.7).00 (.7) Typ.00 (.8).0 (.7) Typ.00 (.8) Typ.0 (.0). (.0) (.0). (7.9). (.).9 (0.8) Typ.0 (.7) Typ.8 (.7).00 (.).9 (0.8) Typ.0 (.7) Typ.8 (7.).89 (.).9 (0.8) Typ.0 (.7) Typ (.8mm) Right Angle PC (.7) Typ.8 (.8) Dia Typ.07 (.) Typ.00 M0TXG0-DC.0 (.8mm) Right Angle PC (.7).00 (.7) Typ.8 (.8).0 (.7).00 (.) Typ.00 (.8) Dia Typ.07 M0TXG0-DC.0 (.8mm) Right Angle PC 8 7 (.7) Typ.8 (.8) Typ.0 (.). (.) Typ.00 (.8) Dia Typ.07 M0TXG0-DC nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

74 Series M racket PC Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons TYPICAL SWITCH DIMENSIS.0 (.8mm) Vertical PC Single Pole M0TXG-DC.0 (.8mm) Vertical PC Double Pole M0TXG-DC.0 (.8mm) Vertical PC Three Pole M0TXG-DC.0 (.8mm) Vertical PC Four Pole M0TXG-DC (0.) Typ.0 (.08).00 (0.) Typ.0 (.08).00 (0.) Typ.0 (.08).00 (0.) Typ.0 (.08).00 (9.7). (9.7). (9.7). (9.7). (9.).0 (.7).08 Shown in Down Position (9.).0 (.7).08 Shown in Down Position (9.).0 (.7).08 Shown in Down Position (9.).0 (.7).08 Shown in Down Position (8.8). (8.8). (.). (.97). (8.8). (.). (.97). (8.8). (.). (.). (.97). (.97). (.).8 (.).8 (.).8 (.).8 (.7).00 (.7).00 (.7).00 (.7).00 (.7).00 (.). (.7).00 (.). (.8). (0.8) Typ.0 (.8) Typ.0 (.8). (0.8) Typ.0 (.8) Typ.0 (.8). (0.8) Typ.0 (.8) Typ.0 (.8). (0.8) Typ.0 (.8) Typ.0 0 (.8) Typ.89 (7.9). 9 (.8).89 (.7) (.8) Typ.89 (7.) (.).878 (.0). (.7).00 (.0). (.7) Typ.00 (.0). (.7) Typ.00 (.0). (.7) Typ.00 (.) Typ.00 (.8) Dia Typ (.) Typ.00 (.8) Dia Typ.07 (.) Typ.09 (.8) Typ.0 (.8) Typ.0 (.7).00 (.) Typ.00 (.8) Dia Typ.07 (.7).00 (.) Typ.00 (.8) Dia Typ.07 7 (.8) Typ.89 (.8) Typ.0 (.). (.8) Typ.89 (.8) Typ.0 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.).

75 racket PC Mount Miniature Rockers Series M (.).0 (.).0 (.).8 TERMINAL LENGTH (.).8 (0.) Typ.0 (0.8) Typ.0 (.7) Typ.8 TERMINAL LENGTH (0.) Typ.00 (0.8) Typ.0 (.7) Typ.8 (.) Typ.0 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 (.8) Typ. (.8). (9.0).70 (9.) Typ.7 (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 (.0). Circuit Mark This Side (.0). Circuit Mark This Side TYPICAL SWITCH DIMENSIS Single Pole (.) Typ.0 (.) Typ.09 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 Single Pole (.) Typ.09 (.8) Typ. (9.) Typ.7 (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 (.7) Typ.0 (.7) Typ.0 C L (.7) Typ.0 (.7) Typ.0 C L (8.0). (9.).8 (.7).00 Terminal Code: (.7).00 RACKET LENGTH (.8) Typ.89 (.8).89 (.) Typ. RACKET LENGTH (.8) Typ.89 (.) Typ.0 (.8).89 Double Pole Double Pole Terminal Length: Straight PC racket M0TZG-JC racket Length:.0 (.mm). (.8mm). (0.8mm).0 (.0mm) 7.9 (.mm).0 (9.mm) Terminal Code: Straight PC Reinforced racket Terminal Length: M0TZG-JC racket Length:.0 (.mm). (.8mm). (0.8mm).0 (.0mm).70 (9.0mm).9 (.mm) nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

76 Series M racket PC Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons (.9) Typ.7 (0.7) Typ.00 LEGENDS NKK Switches can provide custom legends for caps. Contact factory for more information. Suggested Printable Area for Cap AT8 AT0 (7.7).0 (9.7). (0.8) Typ.0 (.7) Typ.7 (0.7) Typ.00 (.) Typ.77 (0.7) Typ.00 (9.9).90 (.).0 Shaded areas are printable areas. Recommended Print Method: Pad Print (0.8) Typ.0 (0.7) Typ.00 (.) Typ. Epoxy based ink is recommended. (.8) Typ.0 (0.7) Typ.00 AT nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.9). (.).9 (0.8) Typ.0 (0.0) Typ.9 (0.7) Typ.00

77 Flat Frame Mount Miniature Rockers Series M M0 Poles SPDT DPDT SPT PDT PDT DPT Circuits NE NE () 8 () () 9 () * * () () * 7 () ( ) = Momentary * - circuits IMPORTANT: TYPICAL SWITCH ORDERING EXAMPLE TN W 0 TN TY Mounting Frames.7 (.9mm) Wide Flat Frame.0 (.8mm) Wide Flat Frame W Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. G A Red. (9.7mm) Wide Rocker SPDT -NE- Circuit Contact Materials & Ratings Silver; Rated V AC & 0V AC Gold; Rated 0.VA 8V AC/DC max Gold over Silver; Rated V AC & 0.VA 8V AC/DC max Terminals 0 Solder Lug* 0.0 (.mm) Straight PC DESCRIPTI FOR TYPICAL ORDERING EXAMPLE Solder Lug Terminals M0TNW0-DC * Wire harness & cable assemblies offered only in Americas Rockers & Paddles Small Actuators (TN Frame). (9.7mm) D Wide Rocker. (9.7mm) E Wide Paddle.0 (.mm) F Wide Rocker.0 (.mm) G Wide Paddle Large Actuators (TY Frame).9 (.mm) J Wide Rocker.9 (.mm) H Wide Paddle.7 (.9mm) Wide Flat Frame Silver Contacts with -Amp Rating D Rocker & Paddle Colors A lack White C Red E Yellow F Green G lue H Gray nkk 开关代理商全国统一热线 北京 上海 C Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

78 Series M Flat Frame Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Pole SP DP P P Model M0 M0 M0 M08 M09 M0 M0 M0 M08 M09 M0 M0 M0 M08 M09 M0 M0 M0 M08 M09 Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up () () () () NE NE NE NE NE NE NE NE () () () () () () () () () () () () POLES & CIRCUITS - OPEN OPEN OPEN OPEN For Throw (-On) Connected Terminals & Schematics Note: Terminal numbers are not actually on the switch. SPDT DPDT PDT PDT (COM) 8 (COM) (COM) 9 (COM) Pole Model Down Center Up Down Center Up SP DP M0 M0 M07 M0 M0 M07 () () The SPT model utilizes a double pole base. External connection must be made during field installation. () () () () External Conn (out) (out) (out) (out) (out) (out) External Connection (in) External External Connection Connection (in) 8 (in) (out) (out) (out) 7 (out) 9 0 (out) (out) Common (in) External Connection (in) (out) (out) (out) External External Connection Connection (in) 8 (in) (out) (out) (out) 7 (out) 9 0 (out) (out) The DPT model utilizes a four pole base. External connection must be made during field installation. External Conn Common (in) (out) 0 (out) (out) 7 7 External Connection (in) (out) 9 8 (out) (out) (out) (out) (out) (out) (out) 7 (out) 9 0 (out) (out) External External Connection Connection (in) 8 (in) 0 Common (in) (out) nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

79 Flat Frame Mount Miniature Rockers Series M TN TY.7 (.9mm) Wide Flat Frame Mounting hardware kit HK-, as shown on the following page, must be ordered separately. MOUNTING FRAMES Small Actuators & Panel Cutouts for TN Frame (actuator details on the following pages) AT8 AT9 AT0 AT.0 (.8mm) Wide Flat Frame Mounting hardware kit HK-, as shown on the following page, must be ordered separately. (.).8 (0.).0 (0.).98 (.). (.9).7 (.) Dia Typ. (7.8).70 (.8).97 (.) Dia Typ.0 (.8).0 Large Actuators & Panel Cutout for TY Frame (actuator details on the following pages) AT (.).8 (0.).0 (.0).0 (9.). (.8).97 (.) Dia Typ.09 AT7 (8.). (.9).7 (.) Dia Typ.8 nkk 开关代理商全国统一热线 北京 上海 (.9).7 (.).90 (.7).00 (.8).97 (.) Dia Typ.0 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

80 Series M Flat Frame Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons W G A CTACT MATERIALS & RATINGS Silver over Silver Power Level V AC & 0V AC Gold over rass or Copper Logic Level 0.VA 8V AC/DC maximum Gold over Silver Note: See Supplement section to find complete explanation of operating range. Power Level or Logic Level V AC or 0.VA 8V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. 0 0 Face Panel Mounting Frame Solder Lug STAND LENGTH Optional Hardware Kits for Subpanel or Face Panel Mounting Panel Thickness.0 (.mm) Straight PC MOUNTING FRAMES (CTINUED) Standoff Length (.7) Typ.8 (.8) Dia Typ.07 Hardware Kit Number TN Frame. (.7mm). (.98mm) ATHK- TY Frame. (.7mm). (7.9mm) ATHK- Hardware kits include: stainless steel screws, hex nuts, lockwashers, & standoffs Epoxy Seal (.) (.8).0.89 (.7).0 Thk = (0.8).0 Flat frame devices may also be mounted to the face panel. Standoffs are used to recess the actuator and achieve an attractive front panel appearance. TERMINALS Epoxy Seal (.0).079 (.).0 Thk = (0.8).0 Subpanel Mounting (.0).7 (.0).079 (.8).89 (.7) Typ.8 (.8) Dia Typ.07 AT0- AT0- (.8) Typ.89 9 (.7) Typ 8.8 (.8) Dia Typ.07 Single Pole Double Pole Three Pole Four Pole 7 These devices are especially designed for subpanel mounting. When installed on a mounting plate behind the panel, hardware is completely concealed and the front panel retains a clean, attractive appearance. Optional Snap-in Panel Frames Further details are shown in the previous bracketed PC mount subsection. 7 AT0- AT0- (.8) Typ (.7) Typ.8 (.8) Dia Typ.07 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

81 Flat Frame Mount Miniature Rockers Series M D AT8. (9.7mm) Wide Rocker Material: Polyamide Finish: Matte (9.7). F AT0.0 (.mm) Wide Rocker Material: Polyamide Finish: Matte (.).0 J (7.9). (.). (8.) (.).9.8 (.87). (.9). (.8). (9.9). (8.8). (7.7).0 AT.9 (.mm) Wide Rocker Material: Polyamide Finish: Matte (.).9 (8.) (.).. (.78).0 (.).8 (.).8 (.0).90 (.0). ROCKERS & PADDLES (.).8 For TN Frame E AT9. (9.7mm) Wide Paddle Material: Polyamide Finish: Matte G For TY Frame (9.7). AT.0 (.mm) Wide Paddle Material: Polyamide Finish: Matte Cap Colors Available: A C E F G H lack White Red Yellow Green lue Gray nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ H (.). (.).9 (.).0 (8.8).70 (.). (.).08 (.8). (.8). (.9). (.).09 (8.) R. (.8). AT7.9 (.mm) Wide Paddle Material: Polyamide Finish: Matte (9.8).7 (.).09 (.8).0 (.).8 (.8) R.0 (.).8 (.7).87 (.) R. (7.).87 (.).8 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

82 Series M Flat Frame Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons TN Frame Solder Lug M0TNW0-DC TN Frame Solder Lug M0TNW0-DC TN Frame Solder Lug M0TNW0-DC TN Frame Solder Lug M0TNW0-DC (.) Dia Typ.09 (.8).97 (9.). (.8).97 (9.). (.8).97 (9.). (.8).97 (9.). (.) Dia Typ.09 (.) Dia Typ.09 (.) Dia Typ.09 TYPICAL SWITCH DIMENSIS (.9).7 (9.7). (.9).7 (9.7). (.9).7 (9.7). (.9).7 (9.7). Single Pole Double Pole Three Pole Four Pole (.).8 (7.9). (9.).80 (.).8 (7.9). (9.).80 (.).8 (7.9). (9.).80 (.).8 (7.9). (9.).80 (.).8 Circuit Mark This Side (0.).0 (0.).0 (.).77 (.).8 Circuit Mark This Side (0.).0 (0.).0 (.).8 (.).77 Circuit Mark This Side (0.).0 (.).88 (.).8 (.).77 Circuit Mark This Side (.) x (.0) Typ.0 x. 079 (.7) Typ.8 (0.8) Typ.0 (0.).00 (.) x (.0) Typ.0 x. 079 (.7) Typ.8 (0.8) Typ.0 (0.).00 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.).00 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.).00 (.).77 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (0.).0 (.).88 0 (7.9) (.8).89 (.7) (7.).89 (.).878 (.0). (.0).079 (.0) Typ.079 (.0). (.0) Typ.079 (.0). (.8) Typ.89 (.0) Typ.079 (.0). (.8) Typ.89

83 Flat Frame Mount Miniature Rockers Series M (.9).7 (.). (.9).7 (.). (.9).7 (.). (.) Dia Typ. (.8).0 (.).9 TYPICAL SWITCH DIMENSIS Three Pole (.) Dia Typ. (.).7 (.).8 (.) Dia Typ. (.8).0 (.).9 (.8).0 (.).9 (.).7 (8.). (0.0).9 (.).8 (8.). (0.0).9 (.).7 Circuit Mark This Side (0.).0 (0.0).9 (8.). (0.0).9 (.).77 Circuit Mark This Side (0.).0 (.).7 Four Pole (.).8 (0.).0 (.).7 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.).00 (.).77 Circuit Mark This Side (.).77 (0.8) Typ.0 (0.).00 Single Pole (.) x (.0) Typ.0 x.079 (.7) Typ.8 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.).00 (7.9). (.0).079 (.0) Double Pole (7.) (.).878 (.8).89 (.0) Typ.079 (.0). (.8) Typ.89 (.0) Typ.079 (.0). (.8) Typ.89 (.0). (.0) Typ.079 Double pole has barrier between terminals. TY Frame Solder Lug M0TYW0-JC TY Frame Solder Lug M0TYW0-JC TY Frame Solder Lug M0TYW0-JC nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

84 Series M Flat Frame Mount Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons (.9) Typ.7 (0.7) Typ.00 LEGENDS NKK Switches can provide custom legends for caps. Contact factory for more information. Suggested Printable Area for Caps AT8 AT0 (7.7).0 (9.7). (0.8) Typ.0 (.7) Typ.7 (0.7) Typ.00 (.) Typ.77 (0.7) Typ.00 (9.9).90 (.).0 Shaded areas are printable areas. Recommended Print Method: Pad Print (0.8) Typ.0 (0.7) Typ.00 (.) Typ. Epoxy based ink is recommended. (.8) Typ.0 (0.7) Typ.00 AT nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.9). (.).9 (0.8) Typ.0 (0.0) Typ.9 (0.7) Typ.00

85 Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Series M00 General Specifications LED Tipped Rockers & Paddles Electrical Capacity (Resistive Load) Power Level (silver): V AC or 0V AC or 0V DC Logic Level (gold): 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum for silver; 0 milliohms maximum for gold Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum between contacts for minute minimum;,00v AC minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum Nominal Operating Force: On-to-On Position Off-to-On Position Paddles Single Pole.9N.9N Double Pole.N 7.0N Rockers Single Pole.7N 9.80N Double Pole.7N 7.N Angle of Throw: 0 Materials & Finishes Housing: Mounting racket: Movable Contacts: Stationary Contacts: Lamp Contacts: ase: Switch Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Soldering Time & Temp: Cleaning: Stainless steel Steel with tin plating Silver alloy or silver alloy with gold plating Silver with silver plating or copper or brass with gold plating Phosphor bronze Diallyl phthalate (UL9V-0) Copper with silver or gold plating rass with silver or gold plating 0 C through + C (+ F through + F) for rockers C through +70 C ( F through +8 F) for paddles 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering (PC version): See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. Note: Lever must be in center position while soldering. PC mountable device is not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL9V-0 base UL: File No. E - Recognized only when ordered with marking on switch. Add /U before dash in part number to order UL recognized switch. Single pole rockers with synchronous circuits & single color LEDs & solder lug or PC recognized at V AC. CSA: File No. 0_0_000 - Certified only when ordered with marking on switch. Add /C before dash in part number to order CSA certified switch. All single pole rockers with synchronous circuits & single color LEDs certified at V AC. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

86 LED Tipped Rockers & Paddles Series M00 M Poles SPDT * DPDT * Available only with Rockers with Terminals 0, 0, 0 Circuits NE IMPORTANT: TYPICAL SWITCH ORDERING EXAMPLE N LED Circuits & Actuator Types R N P J Rocker Isolated Synchronous Paddle Isolated Synchronous Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. DESCRIPTI FOR TYPICAL ORDERING EXAMPLE SPDT -NE- Switch Circuit Silver Contacts with -Amp Rating C E F CF LED Colors Single Color Red Yellow Green icolor Red/Green MNCFW0 CF W 0 Terminals & Mounting Types 0 Solder Lug with Flat Frame* 0 Quick Connect with Flat Frame 0 Straight PC with Flat Frame Straight PC with racket Mount Contact Materials & Ratings Silver; Rated W V AC Gold; Rated 0.VA max 8V AC/DC max 0 Solder Lug with Snap-in Frame* 0 Quick Connect with Snap-in Frame 0 Straight PC with Snap-in Frame Straight PC with racket Mount * Wire harness & cable assemblies offered only in Americas Red/Green LED Synchronous LED Circuit in Rocker Actuator Solder Lug Terminals nkk 开关代理商全国统一热线 北京 上海 Optional ezel & Colors For Snap-in Frame A lack White C Red E Yellow F Green G lue H Gray Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

87 Series M00 LED Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Model Pole & Throw M SPDT Connected Power Terminals - Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous icolor LED Connected LED Terminals - - Red - M SPDT Connected Power Terminals - LED Circuit LED Circuit Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous icolor LED Connected LED Terminals Toggle Position & Terminal Numbers Down Center Up - - Red - M DPDT Connected Power Terminals - - Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous icolor LED Connected LED Terminals Red 8-9 M DPDT Connected Power Terminals - - LED Circuit LED Circuit Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous icolor LED Connected LED Terminals POLES & CIRCUITS & LED ILLUMINATI Red 8-9 NE NE NE NE NE NE NE NE OPEN - OPEN OPEN NE NE NE NE NE NE NE NE OPEN 7-9 OPEN OPEN The electrical specifications shown are determined at a basic temperature of C. LED circuit is isolated and requires an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in Supplement Section. The LED is an integral part of the switch and not available separately. icolor LED is translucent white when unlit. C Rockers Schematics Notes: Terminal numbers are not actually on the switch. LEDs require an external power source. Paddles Single Color icolor Single Color icolor E F CF C E F Red Yellow Green Red/Green Red Yellow Green Red/Green Forward Peak Current I FM / ma Typical Forward Current I F /0 ma Forward Voltage V F....7/ /. V Reverse Peak Voltage V RM V Current Reduction Rate Above C I F / /0.8 ma/ C - - OPEN Green Green OPEN Green Green 8-7 Isolated Single Color LED Isolated icolor LED Synchronous Single Color LED Synchronous icolor LED Isolated Single Color LED Isolated icolor LED Synchronous Single Color LED Synchronous icolor LED LED COLORS & SPECIFICATIS (+) Red COM ( ) Green COM (+) Ambient Temperature Range 0 ~ + C ~ +70 C nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (COM) (COM) (COM) (COM) External Connection (COM) Red Green 9 8 COM (+) 7 External Connection Red Green L(+) L(-) L(+) L(-) 7 9 (COM) (COM) L(+) L(-) (COM) (+) Red 7 COM 9 ( ) Green L(+) L(-) 7 9 CF Red Green Red Green Units

88 LED Tipped Rockers & Paddles Series M00 R N Rocker with Isolated LED Circuit LED CIRCUIT, ROCKER, & MOUNTING TYPE COMINATIS Rocker with Synchronous LED Circuit Material: Polyamide Finish: Matte Color: lack (9.). (9.). (.) Dia.098 (.8).97 (.8).97 (.).0 (9.). (.9).7 (9.). (.9).7 (9.). (.) Dia Typ.09 (.) Dia.098 (.) Dia Typ.09 0 (.) Dia.098 (.0).7 (9.8).8 (0.).0 0 (9.8).8 (.0).7 (.8). (.). 0 (0.).0 (.).8 (.8).89 (.).0 (.0).7 (.).8 Flat Frame combines with Terminal codes 0, 0, & 0. TYPICAL ROCKER SWITCH DIMENSIS 0 (.).8 (.0).7 (9.8).8 (0.).0 (.).8 (0.).799 (.8).89 (.).0 (0.8) Typ.0 (.7) Typ.8 (0.8) Typ.0 (.7) Typ.8 (9.8).8 (.8). (.). 0 (9.8) (0.) Single color LED switch does not have terminal 8. (0.).799 (.).77 (.).0 (0.8) Typ.0 (.7) Typ.8 (0.) Typ.00 Single Pole (.8). (.0).7 (.).8 racket combines with Terminal code. (.7) Typ.0 Single color LED switch does not have terminal. Double Pole Single Pole Only (.7) Typ.0 (9.0). (.) Typ. (.8).89 (.7).00 (.7) Typ.0 (.0). (.7) Typ.0 (.8).89 (.7) (7.).89 (0.).98 (.0). (.0) Typ.079 (.0). (.0) Typ.079 (.8) Typ.89 Single color LED switch does not have terminal. Silver contact material is standard. (7.8).70 Maximum Panel Thickness. (.mm) Direction of Actuation (0.).98 (7.8).70 (.8).97 (.) Dia Typ.0 Solder Lug MNCFW0 Solder Lug MNCFW0 Straight PC racket MNCFW nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

89 Series M00 LED Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons P J Solder Lug Snap-in (7.).80 (.). (.7).9 (0.).00 0 (.).77 (.9) R. (.8).0 TYPICAL PADDLE SWITCH DIMENSIS Single Pole Only MJCFW0 Single color LED switch does not have terminal. Straight PC racket LED CIRCUIT, PADDLE, & MOUNTING TYPE COMINATIS Paddle with Isolated LED Circuit Paddle with Synchronous LED Circuit Material: Polyamide Finish: Matte Color: lack (8.0).709 Maximum Panel Thickness.09 ~. (.0 ~.mm) without ezel.09 ~.098 (.0 ~.mm) with ezel Snap-in combines with Terminal codes 0, 0, & 0 racket combines with Terminal code (.0).079 (.0).079 (.0).97 (.). (.).80 (.0).97 (9.0). (.). Single Pole Only MJCFW Silver contact material is standard. Single color LED switch does not have terminal. 0 (.). 0 (.). (.7).9 (.8).0 (0.).79 (.). (0.).00 (7.).80 (.9). (.).8 (.).0 (0.).79 (.8).89 (.).0 (.).77 (.).0 (0.8) Typ.0 (.7) Typ.8 (0.8) Typ.0 (.7) Typ.8 (0.) Typ.00 (.8). (.7) Typ.0 Maximum Panel Thickness. (.mm) (.8).89 (.7).00 (.).90 (.0). (.0) Typ.079 (9.0). (.) Typ. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.). (0.).79 (.).8 0 (.).77 (.9) R. (.7) Typ.0 (.8).89 (.7).00 (.0). (.7) Typ.0 (.7).00

90 LED Tipped Rockers & Paddles Series M00 W G 0 0 AT07 ezel for Snap-in Panel Frame Material: Polyamide Finish: Matte Silver over Silver Power Level V AC & 0V AC Gold over rass or Copper Logic Level 0.VA 8V AC/DC maximum Solder Lug with Turret LED Terminal Straight PC with Turret LED Terminal (.).0 (.8).89 (.8).89 Thk = (0.8) Typ.0 Epoxy Seal (.7) Typ.0 Straight PC with racket & Turret LED Terminal Colors Available: A lack Epoxy Seal CTACT MATERIALS & RATINGS Complete explanation of operating range in Supplement section. (.).0 (.8).89 (.7).0 (.8).89 Thk = (0.8) Typ.0 Single Pole (.0).079 (.).0 (.8).89 (.7) Typ.8 (.8) Dia Typ.07 OPTIAL EZEL & COLORS (.). (.0).079 (.0).7 TERMINALS (.8). (.0).7 (.).8 0 Single color LED & isolated bicolor LED switches do not have terminal. Single Pole C L (.) Typ.0 (.) Typ.09 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 (.).087 Quick Connect (.).0 (.8).89 Double Pole (.8) Typ.89 9 (.7) Typ 8.8 (.8) Dia Typ.07 (.8).89 Thk = (0.8) Typ.0 White C Red E Yellow F Green G lue H Gray 7 Single color LED & isolated bicolor LED switches do not have terminal. nkk 开关代理商全国统一热线 北京 上海 (.). (.9). Epoxy Seal (.7) Typ.0 Single color LED & isolated bicolor LED switches do not have terminal 8. Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

91 Series M Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): V AC or 0V AC; 0V DC (On-On circuit) & 0V DC (all other circuits) Logic Level (gold): 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Logic/Power Level (gold over silver): Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum for silver; 0 milliohms maximum for gold Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum between contacts for minute minimum;,00v AC minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum for silver; 0,000 operations minimum for gold Contact Timing: Nonshorting (break-before-make) Angle of Throw: Materials & Finishes Lever: Actuator Clip: Support racket: ushing/housing: Sealing Ring: ase: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: PC Processing Shock: Soldering: Cleaning: Standards & Certifications Flammability Standards: UL: CSA: rass with nickel plating Polyacetal rass with tin plating Glass fiber reinforced polyamide (UL9V-0) Nitrile butadiene rubber Glass fiber reinforced polyamide (UL9V-0) Silver alloy with silver plating (code W); copper or phosphor bronze with gold plating (code G); or silver alloy with gold plating (code A) Silver alloy with silver plating (code W); copper or brass with gold plating (code G); or silver alloy with gold plating (code A) Copper or brass with silver or gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering Recommended: See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. UL9V-0 rated bushing/housing & base File No. E - Recognized only when ordered with marking on switch. Add /U or /CUL before dash in part number to order UL recognized switch. All models recognized at V AC, 0V AC, & 0V DC or 8V DC. File No. 0_0_000 - Certified only when ordered with marking on switch. Add /C before dash in part number to order CSA certified switch. All models certified at V AC, 0V AC, & 0V DC. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

92 Process Sealed Miniature Rockers Series M Distinctive Characteristics Antijamming design protects against mechanism damage from downward force on the actuator. O-ring surrounding top of lever prevents liquids from reaching switch mechanism. Ultrasonic welding of upper and lower housing seals out contaminants and allows automatedsoldering and cleaning. Terminals are epoxy sealed to prevent entry of flux, solvents, and other contaminants. racketed models have crimped bracket legs to ensure secure PC mounting and prevent dislodging during automated soldering. Logic level and power capabilities are available to suit varying applications. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

93 Series M Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons MT Poles SPDT DPDT Circuits NE NE () 8 () () 9 () ( ) = Momentary Mounting Frame For Actuators with TX Straight or Angle PC Mount TYPICAL SWITCH ORDERING EXAMPLE TX G Mounting Frame for Actuators with Straight or Angle PC Mount. (9.7mm) Wide Red Rocker Contact Materials & Ratings Silver; Rated W V AC & 0V AC Gold; Rated G 0.VA 8V AC/DC max Gold over Silver; Rated A V AC & 0.VA 8V AC/DC max PC Terminals Straight with.0 (.7mm) racket 0.0 (.8mm) Right Angle.0 (.8mm) Vertical IMPORTANT: Switches are supplied without UL, culus & CSA marking unless specified. UL, culus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. DESCRIPTI FOR TYPICAL ORDERING EXAMPLE MTTXG-DC D E F G A C E F G H Rockers/Paddles. (9.7mm) Wide Rocker. (9.7mm) Wide Paddle.0 (.mm) Wide Rocker.0 (.mm) Wide Paddle Rocker/Paddle Colors lack White Red Yellow Green lue Gray D DPDT -NE- Circuit.0 (.8mm) Vertical Terminals Gold Contacts with 0.VA Rating nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ C

94 Process Sealed Miniature Rockers Series M Pole SP DP TX W G A Model MT MT MT MT8 MT9 MT MT MT MT8 MT9 AT8 MOUNTING FRAME Vertical PC Mounting Silver over Silver Power Level V AC & 0V AC Gold over rass or Copper Logic Level 0.VA 8V AC/DC maximum Gold over Silver Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up () () AT9 NE NE NE NE () () () () () () POLES & CIRCUITS - OPEN - SPDT - - OPEN - - DPDT Mounting Frame for Rockers or Paddles with Straight or Angle PC Terminals Straight PC Mounting (.) Dia.00 (0.).98 Right Angle PC Mounting Actuators & Panel Cutouts (7.8).70 AT0 CTACT MATERIALS & RATINGS Complete explanation of operating range in Supplement section. Power Level or Logic Level Note: Terminalnumbers are not actually on the switch. Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. nkk 开关代理商全国统一热线 北京 上海 Direction of Actuation (.) Dia.00 AT (COM) (COM) (.).90 V AC or 0.VA 8V AC/DC maximum (.) Dia.00 (.7).00 Direction of Actuation Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

95 Series M Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Straight with.0 (.7mm) racket 0 D AT8. (9.7mm) Wide Rocker Material: Polyamide Finish: Matte F AT0.0 (.mm) Wide Rocker Material: Polyamide Finish: Matte Cap Colors Available: (.7).0 (.9). PC TERMINALS TYPICAL SWITCH DIMENSIS Straight PC racket Single Pole Double Pole MTTXG-DC (9.7). (.).0 (8.) (.) (.8mm) Right Angle ROCKERS & PADDLES (.8). (9.9). (7.7).0 (.). A C E F G lack White Red Yellow Green lue (.). (.). NKK P/N This Side (0.) Typ.00 (0.8) Typ.0 (.7) Typ.8 (7.9). (.). (.7).0 (.87). (.9). (8.8). (.8).89 (8.8). (.). (.7) Typ.0 (.7) Typ.0 E (.8).0 AT9. (9.7mm) Wide Paddle Material: Polyamide Finish: Matte G (.8).0 AT.0 (.mm) Wide Paddle Material: Polyamide Finish: Matte (8.0). (.). (.7) Typ.0 (.7) Typ.8 (.8).89 (.) Typ. (9.7)..0 (.8mm) Vertical (.).08 (.9). (8.) R. (.).0 (.).09 (.8). (.8) R. (.) Typ.0 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 H (.8). (.8). Gray C L (8.8).70 (.). (.). (.). (.) Typ.0 (.) Typ.09 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

96 Process Sealed Miniature Rockers Series M (9.7). NKK P/N This Side (9.7). NKK P/N This Side (.) Typ.0 (.08).00 (.) Typ.0 (.08).00 (0.) Typ.0 (.08).00 (0.) Typ.0 (.08).00 (9.7). (9.7). (.). (8.8). (.). (8.8). (8.8). (.). (.).77 (8.8). (.). (.).77 Pivot (.).77 Pivot (.).77 (0.).0 (.7).00 (0.).0 (.7).00 (.).0 (.7).00 (.).0 (.7).00 TYPICAL SWITCH DIMENSIS (.9).9 (.7).00 NKK P/N This Side NKK P/N This Side (0.).00 (.7) Typ.00 (.8).0 (.0).09 (0.8) Typ.0 (.8) Typ.0 (.0).09 (0.8) Typ.0 (.8) Typ.0 Single Pole (.7) Typ.8 (.7).00 Double Pole (9.).8 (9.).8 (.7) Typ.8 (.7).00 Single Pole (.). (0.).00 Double Pole (.). (0.).00 (.).0 (.). (8.). (.). (0.8) Typ.0 (.). (.7). (0.8) Typ.0 (.7).00 (.7).00 (.7).00 (.7) Typ.00 (.8).89 (.7) Typ.8 (.7).00 (.8) Dia Typ.07 (.) Typ.00 (.7) Typ.8 (.8).0 (.7).00 (.) Typ.00 (.8) Dia Typ.07 (.) Typ.09 (.8) Typ.0 (.8) Typ.0 (.7).00 (.) Typ.00 (.8) Dia Typ.07 (.7).00 (.) Typ.00 (.8) Dia Typ.07 Right Angle PC MTTXG0-DC Right Angle PC MTTXG0-DC Vertical PC MTTXG-DC Vertical PC MTTXG-DC nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

97 Series M Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons LEGENDS NKK Switches can provide custom legends for caps. Contact factory for more information. (.9) Typ.7 (0.7) Typ.00 AT8 AT0 (7.7).0 (9.7). (0.8) Typ.0 (.7) Typ.7 (0.7) Typ.00 Shaded areas are printable areas. Recommended Print Method: Pad Print Suggested Printable Area for Cap Epoxy based ink is recommended. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.) Typ.77 (0.7) Typ.00 (9.9).90 (.).0 (0.8) Typ.0 (0.7) Typ.00 (.) Typ.

98 Series MLW Snap-in Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity Power Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Angle of Throw: Materials & Finishes Housing: Movable Contacts: Stationary Contacts: ase: Common Terminal: End Terminals: Lamp Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Cap Installation Force: Soldering Time & Temperature: Standards & Certifications UL: V AC, 0V AC, & 0V DC 0 milliohms maximum 00 megohms 00V DC,000V AC minimum between contacts for minute minimum;,00v AC minimum between contacts & case for minute minimum 0,000 operations minimum 0,000 operations minimum 9.9N for rockers &.N for paddles for On-None-(On); 8 for all other circuits Stainless steel Silver alloy Silver Phenolic resin Copper with silver plating Copper with silver plating Phosphor bronze with nickel plating 0 C through +0 C (+ F through + F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) 9.80N (. lbf) for rockers; 9.N (. lbf) for paddle Manual Soldering: See Profile A in Supplement section. File No. E - Recognized only when ordered with marking on switch. Add /U or /CUL before first dash in part number to order UL recognized switch. All models recognized at V AC & 0V AC. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

99 Snap-in Miniature Rockers Series MLW Distinctive Characteristics Industry s first miniature snap-in, lighted rocker switch. Actuators in various styles operate with firm, well-defined movements. Interlocking actuator prevents switch failure due to jamming or window locking. Two bezel sizes adapt to varied panel cutouts. Unique stainless steel retaining clips securely hold switches over a range of panel thicknesses, even when exposed to vibration. Space conserving front panel mounting with minimum behind panel dimension of.90 (.9mm). Durable stainless steel housing prevents corrosion. Isolated lamp circuit for incandescent, LED, and neon lamps. Front panel relamping. uilt-in protective cover shields contacts from dust. Epoxy sealed solder lug terminals lock out flux, dust, and other contaminants. Extended lamp terminal for ease of wiring. Matching indicators available. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

100 Series MLW Snap-in Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons MLW0 TYPICAL SWITCH ORDERING EXAMPLE DC A Poles Lamps Cap Types & Colors ezels/colors SPDT SPT Incandescent & Neon Lamps Rocker Standard DPDT 00 No Lamp RA lack A lack 0 -volt R White White -volt RC Red C Red Circuits 8 8-volt RD Orange D Orange NE -volt RE Yellow E Yellow 8 8-volt RF Green F Green NE () 0-volt (not suitable RG lue N G lue 8 () () with green & blue) Paddle H Gray 9 () PA lack Large 0 P White A lack ( ) = Momentary PC Red White PD Orange C Red PE Yellow D Orange PF Green E Yellow PG lue F Green Single Element LED Colors Design Rocker G lue C Red D White H Gray E Yellow DC Red F Green DD Orange DF Green DG lue LED Rocker DESCRIPTI FOR TYPICAL ORDERING EXAMPLE L White MLW0--DC-A LC Red LE Yellow LF Green -volt Design Cap IMPORTANT: Incandescent Lamp Sculptured Rocker (lack Rocker ase Switches are supplied with Red Filter) lack.787 S White without UL & culus markings unless specified. UL (0.0mm) SC Red DPDT Wide ezel & culus recognized only -NE-() SE Yellow when ordered with marking Circuit SF Green on the switch. Specific models & ratings noted on General Specifications page. Note: Wire harness & cable assemblies offered only in Americas nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

101 Snap-in Miniature Rockers Series MLW Pole SP DP Switch Terminals. (.0).079 (.0).079 TERMINALS Lamp Terminals (.) Center terminal is (.0) (0.mm) longer Thk = (0.8) Thk = (0.8) AT0 Incandescent Model MLW0 MLW0 MLW0 MLW08 MLW09 MLW0 MLW0 MLW0 MLW08 MLW09.0 (.0).7 LAMP CODES & SPECIFICATIS Electrical specifications are determined at a basic temperature of C. Lamp circuit is independent of switch operation. For dimension drawings of lamps see Accessories & Hardware section. For neon, if the source voltage is greater than rated voltage, a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in the Supplement. AT0N Neon L(+) Incandescent & Neon Lamps for Solid & Design Caps L(-) For Throw (-On) Pole Model Up Center Down Connected Terminals & Schematics External Connection SP MLW00 With External Connection Without External Connection External Connection (in) POLES & CIRCUITS Rocker Position ( ) = Momentary Connected Terminals Throw & Power/Lamp Schematics Up Center Down Up Center Down Notes: Terminal numbers are not actually on switch. Lamp circuit is isolated and requires an external power source. () () NE NE NE NE () () () () () () - OPEN OPEN - - External Connection (in) (out) (out) (out) (out) (out) (out) (out) (out) (out) External Connection (in) The SPT model utilizes a double pole base. External connection must be made during field installation. (.9)..0 (.) Dia N Voltage V V AC V AC 8V AC V AC 8V AC 0V AC Current I 80mA 0mA ma ma ma.ma MSCP NA Endurance Hours,000 Average,000 Average Ambient Temperature Range 0 C ~ +0 C 0 C ~ +0 C Recommended Resistor for Neon: K ohms for 0V AC; 00K ohms for 0V AC T- 00 Pilot Slide ase No Lamp Code 00 indicates that no lamp is used. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ SPDT DPDT (COM) (COM) L (+) L (+) (-) L (-) L (out) External Conn Common (in) (out) (out) Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

102 Series MLW Snap-in Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons LED COLOR CODES & SPECIFICATIS Single Element LED Resistor value calculation is shown E in the Supplement. Color Red Yellow Green AT LED C F T- Pilot Slide ase RA R RC RD L LC LE LF Forward Peak Current I FM 0mA 0mA 0mA Typical Forward Current I F 0mA 0mA 0mA Forward Voltage V F.8V.0V.V Reverse Peak Voltage V RM V V V Current Reduction Rate Above C I F 0.0mA/ C 0.0mA/ C 0.0mA/ C Ambient Temperature Range CAP TYPES & COLORS For Incandescent or Neon Lamps OPTIAL EZELS 0 C ~ +0 C AT0 Rocker AT Paddle AT8 Design Rocker RE RF RG AT LED Rocker PA P PC PD PE PF PG Material: Translucent Polycarbonate Standard Finish: Glossy Translucent Colored Filter lack Rocker/Paddle not for use with lamp Opaque lack Rocker ase Material: Translucent Polycarbonate S SC SE SF AT7 Sculptured Rocker D DC DD DF Standard Finish: Glossy A C D E F Color Codes: lack White Red Orange Yellow Green AT0 Standard ezel.787 (0.0mm) Wide A C D E F G H (+) (-) (.).9 Translucent Colored Diffuser and Opaque lack Rocker ase (.).087 (0.0).787 (.0).0 (.). (.0).0 (0.). (0.). (.). (.0).0 (.).00 (.). (.).9 (.0).7 For LED AT90 Large ezel.97 (.8mm) Wide A C D Material: Polycarbonate Standard Finish: Glossy Material: Polycarbonate Standard Finish: Glossy nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ E F G H (.). (.). (.0).98 (.).098 DG (.8).97 (.). (.0).0 (.0).0 (0.). (.). (.).0 (.). (.).0 G (.0).0 (.).9 lue

103 Snap-in Miniature Rockers Series MLW (.0).7 (.0).7 (.0).0 (.). (.). (.0).0 (.0).7 (.).087 (.).098 (.).7 TYPICAL SWITCH DIMENSIS (.).09 (.). (.).77 NKK Part No. This Side (0.).00 (0.).00 (.9).90 (.0).7 (.).77 (.9). (.) x (.0) Typ.0 x.079 (0.8) Typ.0 (.7) Typ.8 (0.) Typ.0 (.) Dia Typ.07 Without ezel Single & Double Pole Actuator in UP position Terminals,, & are not on single pole models MLW0--PC (.). (.). NKK Part No. This Side (.).087 (0.).00 (.0).8 (.0).7 (.).77 (.9). (.) x (.0) Typ.0 x.079 (0.8) Typ.0 (.7) Typ.8 (0.) Typ.0 (.) Dia Typ.07 (7.0).9 (7.0).9 Standard ezel Single & Double Pole Actuator in UP position Terminals,, & are not on single pole models MLW0--RC-A (.). (.). NKK Part No. This Side (.).098 (0.).00 (.0).8 (.0).7 (.).77 (.9). (.) x (.0) Typ.0 x.079 (0.8) Typ.0 (.7) Typ.8 (0.) Typ.0 (.) Dia Typ.07 (7.0).9 Large ezel Single & Double Pole Actuator in UP position Terminals,, & are not on single pole models MLW0--PC-A (.).0 NKK Part No. This Side (.).087 (0.).00 (.0).8 (.0).7 (.).77 (.9). (.) x (.0) Typ.0 x.079 (0.8) Typ.0 (.7) Typ.8 (0.) Typ.0 (.) Dia Typ.07 (7.0).9 (.0) Typ.8 Sculptured Cap Single & Double Pole Actuator in UP position Terminals,, & are not on single pole models MLW0-C-SC-A (.0) Typ.8 (.0) Typ.8 (.0) Typ.8 L (-) L (+) L (-) L (+) (0.).0 (.). (0.0).787 L (-) L (+) (0.).0 (.). (.0) Typ.079 (0.).0 (.). (.8).97 L (-) L (+) (0.).0 (.). (0.0).787 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.0) Typ.079 (.).00 (.0) Typ.079 (.0) Typ.079 (.0).87 (.).0 (.).00 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

104 Series MLW Snap-in Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons (.7).7 (8.7).7 Without ezel.09 ~.7 (.0mm ~.0mm) Lamps and LEDs can be changed without removing the switch from the panel. The lamp extractor AT07 assists in removing lamps and LEDs. AT07 Lamp Extractor START STOP (.8) Dia.0 Recommended Print Method: Pad Print Epoxy based ink is recommended PANEL CUTOUTS & THICKNESSES (.7).7 (8.7).7 With Standard ezel AT0.09 ~.8 (.0mm ~.0mm) INSTALLATI & MAINTENANCE (0.0).787 (.0) Dia.97 LEGENDS LED (+) Marking this side (9.) Sq.7 With Large ezel AT90.09 ~.8 (.0mm ~.0mm) Actuator (+) Marking NKK Switches can provide custom legends for caps. Contact factory for more information. Note: When changing LEDs, match the positive polarity markings on both lamp base and actuator block. Rocker Design Rocker & LED Rocker ezel (.8).70 (.0).0 (9.).7 (.) Typ.00 (0.7) Typ.00 (.).9 (.08). (.).7 (8.). (.) Typ.00 (0.7) Typ.00 (.). Shaded areas are printable areas. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (0.7) Typ.00 (8.8) Typ.78 (0.0).787 (.) Typ. (0.7) Typ.00 (0.7) Typ.00 (.7) Typ.8

105 Series P Internationally Approved Rockers/Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity Resistive Load: Motor Load: Lamp Load: V AC or 0V AC V AC V AC for On-Off-On circuit & V AC for other circuits Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum between contacts for minute minimum;,000v AC minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum Angle of Throw: Materials & Finishes Frame: Case/ase: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Soldering Time & Temp: Cleaning: Standards & Certifications Flammability Standards: UL: CSA: Stainless steel Diallyl phthalate resin (UL9V-0) Silver alloy with silver plating Pure silver with silver plating Copper with silver plating 0 C through +8 C (+ F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering (Straight PC): See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. UL9V-0 rated case/base File No. E - Recognized only when ordered with marking on switch. Add /U before dash in part number to order UL recognized switch. Add /CUL before dash in part number to order culus recognized switch. All models recognized at V AC & 0V AC. File No. 0_0_000 - Certified only when ordered with marking on switch. Add /C before dash in part number to order CSA certified switch. All models certified at V AC & 0V AC. VDE: License No. 97 All models approved at V AC & 0V AC. Marking on switch is standard. All models meet EN 08- standard. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

106 Internationally Approved Rockers/Paddles Series P Distinctive Characteristics Meets EN 08- standard. Contacts of special silver alloy resist arcing and guarantee stable electrical contact and long life. Stainless steel frame resists corrosion and increases environmental safety. High insulating barriers increase isolation of circuits in double pole devices and provide added protection to contact points. Case/base of heat resistant resin meets UL9V-0 flammability standard. Prominent external insulating barriers increase insulation resistance and dielectric strength. Clinching of the frame to the case well above the base and terminals provides,000v dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

107 Series P Internationally Approved Rockers/Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons P0 Poles & Circuits SPST NE SPDT NE SPDT DPST NE DPDT NE DPDT Paddle/Rocker Frames N Frame for Small Caps Y Frame for Large Caps IMPORTANT: VDE is marked on all models. Switches are supplied without UL, culus & CSA marking unless specified. UL, culus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. TYPICAL SWITCH ORDERING EXAMPLE DPDT -NE- Circuit Y D E J H No Code P Z Terminals Solder Lug* Straight PC.87 (.7mm) Quick Connect Rocker/Paddle Caps For N Frame. (9.7mm) Wide Rocker. (9.7mm) Wide Paddle For Y Frame.9 (.mm) Wide Rocker.9 (.mm) Wide Paddle DESCRIPTI FOR TYPICAL ORDERING EXAMPLE.9 (.mm) Wide Red Rocker P0Y-JC J Frame for Large Caps Solder Lug Terminals C Cap Colors A lack White C Red E Yellow F Green G lue H Gray * Wire harness & cable assemblies offered only in Americas nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

108 Internationally Approved Rockers/Paddles Series P Pole N P Model Frame for Small Actuator No Code Straight PC Epoxy Seal Solder Lug (.8).89 Using AT8 & AT9 (7.).99 (.7).0 Thk = (.0).09 Rocker Position Connected Terminals Throw & Schematics Down Center Up Down Center Up SP P0 NE -b OPEN OPEN SPST SP P0 P0 NE DP P0 NE DP P0 P0 (.0). (.8).0 (.). (.) Dia Typ. (.9).7 (.). NE (0.).98 POLES & CIRCUITS -b OPEN -a SPDT -b -b -b -b ROCKER/PADDLE FRAMES (7.8).70 (.9).7 (.) Dia Typ.8 Maximum Panel Thickness:. (.mm) Epoxy Seal SPST (.).0 Thk = (.0).09 b (.).77 (.).09 (7.) Typ.00 (.8) Dia Typ.07 (.0).079 Y TERMINALS SPDT b a OPEN OPEN DPST OPEN Z (7.) Typ.00 (.8) Dia Typ.07 -a -a Frame for Large Actuator (.8).0 (.) Dia Typ..87 (.7mm) Quick Connect DPST Note: Terminal numbers are on the switch. DPDT (.9).7 (.). a a (COM) b (COM) b Using AT & AT7 b b (0.).00 (7.) Typ.00 (.8) Dia Typ.07 (.0).0 (COM) b DPDT (COM) a b (8.). (.9).7 (.) Dia Typ.8 Maximum Panel Thickness:. (.mm) (.).0 (.) Dia.0 (9.0). (.7).87 Thk = (0.8).0 b a b a (0.).00 b b (7.) Typ.00 (.8) Dia Typ.07 nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

109 Series P Internationally Approved Rockers/Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons D J N Frame Y Frame AT8. (9.7mm) Wide Rocker AT.9 (.mm) Wide Rocker Cap Colors Available: (9.7). (.).9 A (0.).98 lack (.9).7 (.). ROCKER/PADDLE CAPS For N Frame TYPICAL SWITCH DIMENSIS AT9. (9.7mm) Wide Paddle P0N-DC P0 & P0 models do not have terminals a & a. (.9).7 (.). (7.9) (.).. (.).0 (.8).0 (9.7). (.). (.8).0 (.).9 (.87). (.9). (.78).0 (.0).90 P0Y-JC P0 & P0 models do not have terminals a & a. E For Y Frame C Red E White Material: Polyamide (.) Dia Typ. (8.8). (.).8 (.0). (.).8 H AT7.9 (.mm) Wide Paddle F Yellow Finish: Matte (.).8 (9.).80 (.).7 (0.).98 (0.).0 (.).8 (.0).8 (0.).0 (.).8 (.7).8 Green (.) x (.0) Typ.09 x.079 (.0) Typ.09 (0.8).0 (0.).00 (.0).97 (7.).00 (.) x (.0) Typ.09 x.079 (.0) Typ.09 (0.).00 (.0).97 (0.8).0 (7.).00 (9.7). G lue H Gray b a (8.8).70 (.) Dia Typ. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (.). (.).9 (9.8).7 b (.0). a (0.).00 (0.0).787 (.8). (.8).0 (.).0 b a (.).08 (.).09 (0.).807 (.) Typ.0 (.9). (8.) R. (0.).807 (.).8 (.7).87 (7.).87 (.).8 (.) R.

110 Series SW Medium Capacity Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V AC minimum for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum Angle of Throw (α): Shown on drawings or following tables Materials & Finishes Rocker: Urea resin; all rockers are white. Mounting Frame: Steel with chromate plating over zinc plating Case Cover/Insulator: Phenolic resin Case: Melamine phenol Movable Contactor Plate: Copper with silver plating Movable & Stationary Contacts: Silver alloy plus copper with silver plating Terminals: Copper with tin plating Environmental Data Operating Temp Range: 0 C through +70 C (+ F through +8 F) Sealing: Dustproof cover of silicone rubber on SW00A, SW007A, & SW008A Installation Maximum Panel Thickness: Shown with following drawings Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications GENERAL SPECIFICATIS FOR SW000s UL: File No. E - Recognized only when ordered with marking on switch. Add /U or /CUL to end of part number to order UL recognized switch. UL or culus recognition designated beside part numbers on following pages. See Supplement section to find UL or culus rating details. CSA: File No. 0_0_000 - Certified only when ordered with marking on switch. Add /C to end of part number to order CSA certified switch. CSA certification designated beside part numbers on following pages. See Supplement section to find CSA rating details. VDE: License No Approved only when ordered with marking on switch. Add /V to end of part number to order VDE approved switch. SW00A at V AC & 0V AC nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

111 R R R 日本 NKK 官网的英文船型开关说明书 Medium Capacity Rockers Series SW * UL & CSA recognized only when ordered with marking on switch (see General Specs) (8.0).9 (8.0).9 Model M x (9.7).8 M x (.). (.). *Approvals (7.0).0 (.).8 (7.0).0 (.).8 Pole SW00A does not have terminal. (9.).78 (.7). (.9). (.0).09 (.) Dia Typ.09 (.). (.7). (0.8) Typ.0 (.8) Typ.89 (8.0).709 (0.0).8 (.0).77 Maximum Effective Panel Thickness:.97 (.0mm) for SW00A & SW00A models;.77 (.mm) for SW00A models (.0).09 SINGLE POLE WITH SOLDER LUG * Rocker Position/Connected Terminals (.). (.7). (.) Dia Typ.09 (.8) Typ.89 (0.8) Typ.0 (.).8 (.0).77 (.).7 (.) Dia Typ.8 (8.0).0 (8.0).9 Maximum Effective Panel Thickness:.97 (.0mm) for SW00A & SW008A models;.77 (.mm) for SW007A models (8.).78 Electrical Capacity Down Center Up Resistive Inductive α = AC V AC 0V (.).7 (.) Dia Typ.8 DC 0V (8.0).0 (8.0).9 AC V PF 0. SW00A SPST - NE A A A 0A SW00A SPDT - NE - A A A 0A SW00A SPDT - - A A A 0A 8 Throw & Schematics: SPST INTERNAL CNECTI * Wire harness & cable assemblies offered only in Americas. * UL, culus & CSA recognized only when ordered with marking on switch (see General Specs) Model *Approvals SPDT (COM) DOULE POLE WITH SOLDER LUG * Rocker Position/Connected Terminals ( ) = Momentary Pole Angle of Throw Note: Terminal numbers are actually on the switch. Electrical Capacity SW00A Down Center Up Resistive Inductive α = AC V AC 0V DC 0V AC V PF 0. SW00A DPDT - - NE - - 0A 0A 0A 0A SW007A DPDT A A A 0A 8 SW008A DPDT () - - () - - A A A 0A Throw & Schematic: C US DPDT * Wire harness & cable assemblies offered only in Americas. (COM) SW00A Angle of Throw Note: Terminal numbers are actually on the switch. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

112 Series SW High Capacity Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Electrical Capacity (Resistive & Inductive Load) Other Ratings Power Level: Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: Nominal Operating Force: Materials & Finishes Environmental Data Rocker: Mounting Frame: Case Cover/Insulator: Case: Movable Contacts: Stationary Contacts: Terminals: Operating Temp Range: Standards & Certifications GENERAL SPECIFICATIS FOR SW800s UL: CSA: Shown in the following tables Note: See Supplement section for details of design for inductive DC loads. 0 milliohms maximum,000 megohms 00V DC,000V AC minimum for minute minimum 0,000 operations minimum,000 operations minimum Shown on following drawings,800 grams for SW8,00 grams for SW8 Off to On 800 grams for SW8 On to Off Urea resin; all rockers are white. Steel with chromate plating over zinc plating Phenolic resin Melamine phenol Copper with silver plating Silver alloy plus copper with silver plating rass (terminal screws of brass with nickel plating) 0 C through +70 C (+ F through +8 F) File No. E - Recognized only when ordered with marking on switch. Add /U or /CUL to end of part number to order UL recognized switch. UL or culus recognition designated beside part numbers on following pages. See Supplement section to find UL or culus rating details. File No. 0_0_000 - Certified only when ordered with marking on switch. Add /C to end of part number to order CSA certified switch. CSA certification designated beside part numbers on following pages. See Supplement section to find CSA rating details. Wiring for DC00V 0A External Connection Minus Pole Connection Plus Pole Connection () () () () Contact Connection Position nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

113 R R R R 日本 NKK 官网的英文船型开关说明书 High Capacity Rockers Series SW Rocker Position/Connected Terminals Electrical Capacity *Approvals Down Center Up Resistive Inductive AC AC AC AC DC DC DC DC DC V 0V Model C US Pole V 0V 0V 8V V 0V 00V PF 0. PF 0. SW8 DPST - - NE 0A 0A 0A A 0A A SW8 DPDT - - NE - - 0A 0A 0A A 0A A SW8 DPDT A 0A 0A A 0A A SW8D DPST - - NE 0A 0A 0A A A (0A) SW8D DPDT - - NE - - 0A 0A 0A A A SW8D DPDT A 0A A (.0).8 Throw & Schematics: (.0).8 M x (.0).8 (.0).7 (.0).0 (.).0 SW8 & SW8D do not have terminals &. Model M x (.0).8 *Approvals Pole (.0).7 (.0).0 (.7). (.).0 (.7). (.0).09 (.0).09 (.).7 M.x (.0) Typ.7 (.0).7 (.0).9 (.0). (.0).0 Maximum Effective Panel Thickness.77 (.mm). Panel cutout shown below. Rocker Position/Connected Terminals (.).7 M. x (.0) Typ (.0).9 (.) Typ.7 (.0). Electrical Capacity (.0).0 SW8 Down Center Up Resistive Inductive AC V AC 0V DC 0V DC V AC V PF 0. SW8 PST NE 0A 0A 0A A 0A A SW8 PDT NE A 0A 0A A 0A A SW8 PDT A 0A 0A A 0A A SW8D PST NE 0A A SW8D PDT NE A A SW8D PDT A A Throw & Schematics: C US PST DPST (COM) (COM) 8 9 DOULE POLE WITH SCREW LUG THREE POLE WITH SCREW LUG PDT (COM) * UL/CUL & CSA for the following ratings: UL/CUL: 0V DC, V DC; CSA: 0V DC, V DC * UL, culus & CSA recognized only when ordered with marking on switch (see General Specs) ( ) capacity is due to series wiring, see General Specifications page. DPDT (COM) * UL/CUL & CSA for the following ratings: UL/CUL: 0V DC, V DC; CSA: 0V DC, V DC * UL, culus & CSA recognized only when ordered with marking on switch (see General Specs) Note: Terminal numbers are actually on the switch. (.0).90 (.) Dia Typ.8 AC 0V PF 0. Note: Terminal numbers are actually on the switch. SW8 & SW8D do not have terminals, & 7. Maximum Effective Panel Thickness.77 (.mm) nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ (7.0).7 (.0).8 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

114 Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Series WR General Specifications Electrical Capacity (Resistive Load) Power Level: /0V AC or 0V DC Environmentally Sealed Rockers Other Ratings Contact Resistance: 0 milliohms maximum for solder lug, screw & quick connect terminal models 0 milliohms maximum for wire lead terminal models Insulation Resistance: 00 megohms 00V DC Dielectric Strength:,0V AC minimum between contacts for minute minimum,70v AC minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum for circuit and models 0,000 operations minimum for circuit,, 8, 9 models Angle of Throw: Materials & Finishes Rocker: Phenylene oxide Outer Housing: Polyamide (UL9V-0) Inner Case: Melamine (UL9V-0) Cover for Wire Lead Models: Glass fiber reinforced polyamide (UL9V-0) Flange Gasket: Nitrile butadiene rubber Movable Contactor: Copper with silver plating Movable Contacts: Silver alloy plus copper with silver plating Stationary Contacts: Silver alloy plus copper with silver plating Terminals: Copper with tin plating for solder lug & wire lead rass with silver plating for screw lug rass with tin plating for quick connect Wire Lead Covers: Heat resistant polyvinyl chloride (Leads are AWG ) Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Front Panel Seal: ehind Panel Seal: Installation Soldering Time & Temp: Cleaning: Standards & Certifications Flammability Standards: UL: VDE: Wiring Material Standards: C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) IP7 of IEC09, dust tight & water protected during temporary immersion for all models IP0 of IEC09, dust tight but not water protected for solder lug, screw & quick connect models IP7 of IEC09, dust tight & water protected during temporary immersion for wire lead models Manual Soldering: See Profile A in Supplement section. Hand clean locally using alcohol based solution. UL9V-0 outer housing, inner case, & outer cover on wire lead models File No. E - Recognized only when ordered with marking on switch. Add /U or /CUL to end of part number to order UL recognized switch. Solder & screw lug models recognized at /0V AC & 0V DC. License No. 0 - Approved only when ordered with marking on switch. Add /V to end of part number to order VDE approved switch. All models approved at 0V AC (pending for quick connect). EN: No. 08- WR & WR models meet European Norm for mm contact gap to prevent contact welds. UL AWM 0 Recognized at Flammability VW-. Temperature Range 0 C ~ +0 C; Maximum Load 00V; AWG. CSA TEW 0 Certified at Temperature Range 0 C ~ +0 C; Maximum Load 00V. nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

115 Environmentally Sealed Rockers Distinctive Characteristics Single unit construction of the flange and outer housing gives added protection from environmental elements. Specially designed contact mechanism for breaking light welds. Minimal contact bounce achieved with specially designed interlocked switching mechanism. Heat resistant resin used for outer housing, inner case, and cover on wire lead models meets UL9V-0 flammability standard and provides high arc and tracking resistance. Available with solder lug, screw, quick connect, and wire lead terminations. Sealed Construction Meets IP0 & IP7 Standards Solder lug, screw, and quick connect terminal models meet IP7 of IEC09 Standards at front panel (dust tight and water protected for temporary immersion, patent pending). ehind panel standard is IP0 (dust tight but not water protected). Wire lead models conform fully to IP7 of IEC09 Standards at front and behind panel (dust tight and water protected for temporary immersion). Switch base is epoxy sealed and covered by an outer case for further protection from dust and water. (Switches cannot be operated under water. Contact factory for further details regarding operating environment.) Series WR Actual Size nkk 开关代理商全国统一热线 北京 上海 Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 深圳天津 shunto@

116 Series WR Environmentally Sealed Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons WR Poles SPST SPDT IMPORTANT: TYPICAL SWITCH ORDERING EXAMPLE Circuits NE NE NE () 8 () () 9 () ( ) = Momentary Switches are supplied without UL, culus & VDE marking unless specified. UL, culus & VDE recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. SPDT -NE- Circuit DESCRIPTI FOR TYPICAL ORDERING EXAMPLE WRS Rockers A lack * Ivory * Contact Factory for Quick Connect with Ivory Rocker Ivory Rocker Solder Lug Terminals with Epoxy Seal S SN T TN F FN L S Terminals Solder Lug with Epoxy Seal* Solder Lug without Epoxy Seal* Screw Lug with Epoxy Seal Screw Lug without Epoxy Seal.0 (.mm) Quick Connect with Epoxy Seal*.0 (.mm) Quick Connect without Epoxy Seal* Wire Lead * Wire harness & cable assemblies offered only in Americas nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@

117 Environmentally Sealed Rockers Series WR Pole Model Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up Note: SP WR NE a-b OPEN OPEN SPST SP (.0). (0.0).8 (.0). (0.0).8 WR WR WR WR8 WR9 NKK P/N This Side (.9).08 (.0).9 NKK P/N This Side (.9).08 (.0).9 () (.).00 (.).00 NE NE (.).098 (.).098 (7.8).07 (7.8).07 () () () POLES & CIRCUITS -b OPEN -a SPDT TYPICAL SWITCH DIMENSIS (.).9 WR model does not have terminal. (8.9). (.8).89 (8.).7 (.) Dia Typ.09 (.) Typ. (8.8). (.). (0.8) Typ.0 M. x Typ (.) Typ. (8.8). (.). (.0) Typ.09 WR model does not have terminal. a b (.8). (7.).77 a b (.8). (7.).77 (.8) Typ.89 (.) Typ.0 (7.).77 Panel Thickness.09 ~.7 (.0mm ~.0mm) (7.).77 Terminal numbers are not actually on wire lead models. (.). (.). Panel Thickness.09 ~.7 (.0mm ~.0mm) a a (COM) b (COM) b Solder Lug Terminals WRAS Screw Lug Terminals WRAT nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@ Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles

118 Series WR Environmentally Sealed Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons.0 (.mm) Quick Connect Terminals TYPICAL SWITCH DIMENSIS WRAF WR model does not have terminal. Wire Lead Terminals (.0). (0.0).8 (.0). (0.0).8 NKK P/N This Side (.9).08 (.0).9 NKK P/N This Side (.9).08 (.0).9 WRL WR model does not have terminal. Wire leads are covered with heat resistant vinyl in accordance with UL 0 and CSA TEW 0 Standards for Appliance Wiring Material (AWM). (.).00 (.).00 (7.8).07 (.).098 (.).098 (7.8).07 (.).8 (9.). (7.9). (0.7). (.) Dia Typ.0 (0.8).0 Typ (.) (7.).0.9 (.9). (.). (0.0).9 (00.0) + (0.0) 7.87 STANDARD WIRE COLOR SCHEME (.). (.). (7.).77 Terminal Numbers & Wire Colors a b WR lack White WR-9 White lack Red a b (.8). (7.).77 a b (.).890 (8.8). (7.).77 Panel Thickness.09 ~.7 (.0mm ~.0mm) (7.).77 (.). (.). Panel Thickness.09 ~.7 (.0mm ~.0mm) nkk 开关代理商全国统一热线 北京 深圳天津上海 shunto@