Listing Constructional Data Report (CDR)

Transcription

1 Listing Constructional Data Report (CDR) 1.0 Reference and Address Report Number TP CT Original Standard(s) Information Technology Equipment-Safety-Part 1: General Requirements (ANSI/UL : 2007 and CAN/CSA-C22.2 No , Second Edition, Rev. March 27, 2007) Applicant Address Country Contact Phone FAX 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221 Manufacturer Address Tech-Com (Shanghai) Computer Co., Ltd. No. 68, Sanzhuang Road, Songjiang Export Processing Zone, Shanghai Taiwan Country P.R. China Mr. Easy Lai Contact Alice Wei Phone FAX Alice Page 1 of 20

2 Page 2 of Product Description Product Brand name Description Notebook Computer 1 ) acer, 2 ) emachines The equipment is a Notebook Computer for use in a general office environment and for indoor use only. The equipment is considered as transportable and Class III equipment. Marketing name are Aspire 4739 series and D729 series which is only for the marketing purpose, no safety consideration. The equipment is supplied by an approved external switching power supply unit and accompanies one HDD, one Card Reader, one internal Wireless Module, one internal Bluetooth Module, one Web Camera Module and one CPU cooling fan. Also provided with three USB ports, one HDMI port (optional), one VGA port, one Microphone-in Jack and one Headphone Jack. The equipment was submitted and evaluated for maximum manufacturer s recommended ambient (Tmra) of 35 degree C. The enclosures fixed together by screws and mechanical fixing. Overall approx. 343 mm by 249 mm by 34.4 mm. CPU information: Intel Core i3-380m / 2.53 GHz. Models Model Similarity Ratings Other Ratings 1 ) ZQH*, 2 ) ZQJ* (The * can be 0-9, A-Z or blank for the marketing purpose) Model ZQJ* is identical to model ZQH* except for the model designation and trademark. Marketing name are Aspire 4250 series and D443 series which is only for the marketing purpose, no safety consideration. 19 Vdc, 3.42 A NA

3 3.0 Product Photographs Page 3 of 20 Photo 1 - External view of model ZQH, also representative other identical models 1 Photo 2 - External view of model ZQH, also representative other identical models 7

4 3.0 Product Photographs Page 4 of 20 Photo 3 - External view of model ZQH, also representative other identical models 7 Photo 4 - External view of model ZQH, also representative other identical models

5 3.0 Product Photographs Page 5 of 20 Photo 5 - External view of model ZQH, also representative other identical models Photo 6 - Internal view of model ZQH, also representative other identical models

6 3.0 Product Photographs Page 6 of 20 Photo 7 - Internal view of model ZQH, also representative other identical models Photo 8 - Motherboard

7 3.0 Product Photographs Photo 9 - Motherboard Page 7 of 20 Photo 10 - Sub board

8 3.0 Product Photographs Photo 11 - Battery pack (representative) Page 8 of 20 15

9 Page 9 of Critical Components Photo # Item no. 1 Name Manufacturer/ trademark 2 Type / model 2 Technical data and securement means Mark(s) of conformity Enclosure (Lower case, Upper case, panel cover) Enclosure (panel bezel) MITSUBISHI ENGINEERING- PLASTICS CORP BAYER THAI CO LTD 5 3 LCD panel various various TMB1615+ V-0, min. 1.0 mm thickness, 60 ºC curus FR3002 V-0, min 1.0 mm thickness, 60 ºC curus 14.0 TFT, LED backlight type, Material of LCD screen V-1 min 5 4 Power Switch various various SELV, functional switch NR 7 5 Hard Disk Drive various various 5 Vdc, max. 1.5 A curus 7 6 Optical Drive various various 2,3 7 Connector (USB, RJ45, VGA, HDMI port) various various 7 8 Speaker Module various various External power supply Printed Wiring Board 8 11 RTC Battery 8 11 RTC Battery (alternate) various various JHIH HONG TECHNOLOGY CO LTD various 7 12 CPU Cooling Fan ADDA CORPORATION DELTA CPU Cooling Fan 7 12 ELECTRONICS (alternate) INC CPU Cooling Fan (alternate) 7 12 CPU Cooling Fan (alternate) 7 12 CPU Cooling Fan (alternate) Power Distribution Switch Polyswitch (for VGA and HDMI port) Polyswitch (for VGA and HDMI port) (Alternate) SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD Suzhou Forcecon Electric Co., Ltd. various various CR2032 CR Vdc, 1.8 A max. Laser Class 1, front enclosure rated min. V-1 Recognized Component. Plastic. Rated min. V-2, SELV Two provided. Each 4 ohm, 2.0 W max. Not shown. Listed Component. Optional. I.T.E Power Supply. Rated output 19 Vdc, 3.42 A. Maximum ambient temperatures at least 35 degree C. Recognized Component. Rated minimum 94V-1, minimum 105 degree C 3 Vdc, max. abnormal charging current 10 ma 3 Vdc, max. abnormal charging current 10 ma NR curus UL, cul NR UL, cul UL, cul URus URus AB7305HX-ED3 5 Vdc, 0.5 A, 6.8 CFM min. NR MF60090V1- C090-G99 5 Vdc, 0.5 A, 6.1 CFM min. NR KSB06105HA 5 Vdc, 0.4 A, 6.06 CFM min. NR DFS531005MC 0T 5 Vdc, 0.5 A, 6.32 CFM min. NR various various 5 Vdc, max. 0.5 A, min CFM NR Global Mixedmode Technology Inc. G547F2 LITTELFUSE INC 1206L110-C Polytronics Technology Corp. SMD1206P110 TF Not shown. 1.0 A, Vdc per output channel, SELV, CI. III Not shown. 6 Vdc, Ih=1.1 A, It=2.2 A Not shown. 6 Vdc, Ih=1.1 A, It=2.2 A URus URus URus

10 Page 10 of Critical Components Photo # Item no. 1 Name Manufacturer/ trademark 2 Type / model 2 Technical data and securement means Mark(s) of conformity Polyswitch (for VGA and HDMI port) (Alternate) Battery pack Battery pack (alternative) Battery pack (alternative) Battery pack (alternative) Battery pack (alternative) Thinking Electronic Industrial Co., Ltd. SIMPLO TECHNOLOGY CO., LTD. Sanyo Energy (Taiwan) Co., Ltd. SAMSUNG SDI Co., LTD SONY TAIWAN LTD PANASONIC ENERGY TAIWAN CO., LTD. KMC5S110 AS10D71, AS10D73, AS10D75 AS10D31, 3ICR19/65-2 AS09D61 AS10B61 AS10D61 AS10D41 AS10D Mylar sheet various various 4 17 Marking various various Not shown. 6 Vdc, Ih=1.1 A, It=2.2 A 11.1 Vdc, 4400 mah or 48 Wh, 6 cells 10.8 Vdc, 4400 mah, 48 Wh or 10.8 Vdc, 48 Wh, 6 cells URus UL, cul UL, cul 11.1 Vdc, 48 Wh, 6 cells UL, cul 10.8 Vdc, 4400 mah or 48 Wh, 6 cells 10.8 Vdc, 4400 mah or 48 Wh, 6 cells Recognized Component. Plastic. Rated minimum V-2. Not shown Pressure sensitive adhesive label, located on the bottom enclosure. Contains minimum the following information: Control No., Model No., Input rating, as well as ETL and ETLc Marking. Refer to Illuaration 3 for details. Not shown 1) Not all item numbers are indicated (called out) in the photos, as their location is obvious. 2) Various means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s) of conformity" can be used. UL, cul UL, cul curus URus, CSA 3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted and only visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section 5.0 for details.

11 5.0 Critical Unlisted CEC Components Page 11 of 20 No Unlisted CEC components are used in this report.

12 Page 12 of Critical Features Recognized Component - A component part, which has been previously evaluated by an accredited certification body with restrictions and must be evaluated as part of the basic product considering the restrictions as specified by the Conditions of Acceptability. Listed Component - A component part, which has been previously Listed or Certified by an accredited Certification Organization with no restrictions and is used in the intended application within its ratings. Unlisted Component - A part that has not been previously evaluated to the appropriate designated component standard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing or component recognition. Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of a product that has a direct bearing on the product s conformance to applicable requirements of the product standard. Construction Details - For specific construction details, reference should be made to the photographs and descriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to the specific construction details described in this Report, the following general requirements also apply. 1. Spacing - In primary circuits, minimum spacing are maintained through air and over surfaces of insulating material between current-carrying parts of opposite polarity and minimum between such current-carrying parts and dead-metal parts. The equipment is supplied by approved external power supply unit. Only SELV circuits within the EUT. No spacing is required. 2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and display lamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or other mounting format that prevents turning of the component. 3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or the equivalent. 4. Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a palstic enclosure constructed with no openings other than those specifically described in Sections 4 and Grounding - The product is not provided with a means of grounding as it is double insulated by external power supply unit. 6. Polarized Connection - This product is provided with a polarized power supply connection. All single pole switches and fuses are connected only to the ungrounded supply circuit conductor. 7. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminating in soldered connections are made mechanically secure prior to soldering. Recognized Component separable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other types specifically described in the text of this report are also acceptable as internal wiring terminals. At points where internal wiring passes through metal walls or partitions, the wiring insulation is protected against abrasion or damage by plastic bushings or grommets. 8. Schematics - Refer to Illustration No. - for schematics requiring verification during Field Representative Inspection Audits. 9. Markings - The product is marked on a component labeling system the with manufacturer's name, trade name or other description marking, catalog or model nember, electrical rating and data of manufacturer. The following markings in French are required: N/A. No Caution/Warning marking is required on marking label. 10. Cautionary Markings - The following are required: N/A. No Caution/Warning marking is required on marking label. 11. Installation, Operating and Safety Instructions - Instructions for installation and use of this product are provided by the manufacturer. Refer to Illustration No(s). 1 for details.

13 7.0 Illustrations Page 13 of 20 Illustration 1 - INSTRUCTION MANUAL Provide with each unit, including the following safety caution: 1. Battery Replacement Marking for RTC Battery and Battery Pack, similar text as below is permitted

14 7.0 Illustrations Illustration 2 - Openings Page 14 of 20

15 7.0 Illustrations Illustration 3 - Marking Label Page 15 of Brand name: 1 ) acer, 2 ) emachines 2. Model name: 1 ) ZQH*, 2 ) ZQJ* (The * can be 0-9, A-Z or blank for the marketing purpose) 3. Input rating: 19 V, 3.42 A 4. ETL Certification Mark and Control Number: Standard: CONFORMS TO ANSI/UL STD CERTIFIED TO CAN/CSA STD. C22.2 NO (Representative)

16

17 Page 17 of 20 R evised: None 9.0 Correlation Page For Multiple Listings The following products, which are identical to those identified in this report except for model number and Listee name, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program. BASIC LISTEE Address Country Product 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221 Taiwan Notebook Computer MULTIPLE LISTEE 1 Address Country Brand Name ASSOCIATED MANUFACTURER Address Country None MULTIPLE LISTEE 1 MODELS BASIC LISTEE MODELS MULTIPLE LISTEE 2 Address Country Brand Name ASSOCIATED MANUFACTURER Address Country None MULTIPLE LISTEE 2 MODELS BASIC LISTEE MODELS MULTIPLE LISTEE 3 Address Country Brand Name ASSOCIATED MANUFACTURER Address Country None MULTIPLE LISTEE 3 MODELS BASIC LISTEE MODELS

18 Page 18 of 20 R evised: None 10.0 General Information The Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance with the requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorization prior to using alternate parts, components or materials. COMPONENTS Components used shall be those itemized in this Intertek report covering the product, including any amendments LISTING MARK The ETL Listing mark applied to the products shall either be separable in form, such as labels purchased from Intertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark is subject to the control of Intertek. MANUFACTURING AND PRODUCTION TESTS Manufacturing and Production Tests shall be performed as required in this Report. FOLLOW-UP SERVICE Periodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shall be scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to the following: 1. Conformance of the manufactured product to the descriptions in this Report. 2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement. 3. Manufacturing changes. 4. Performance of specified Manufacturing and Production Tests. In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, the Applicant shall take one or more of the following actions: 1. Correct the non-conformance. 2. Remove the ETL Mark from non-conforming product. 3. Contact the issuing product safety evaluation center for instructions Evaluation of Unlisted Components Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program, Intertek may require these components to be tested and/or evaluated at least once annually, more often for certain components, as part of the independent certification process. The Unlisted Components in Section 5.0 require testing and/or evaluation as indicated. Note to Intertek Follow Up Inspector: The Component Evaluation Center, CEC, will notify you in writing when these components must be selected and sent to the CEC for re-evaluation Ship the samples to: Intertek Testing Services Taiwan Limited ETL Component Evaluation Center 5/F., No. 423, Ruiguang Road, Neihu District Taipei 114, Taiwan Attn: Ms. Yin-lan Chen Sample Disposition: Due to the destructive nature of the testing, all samples will be discarded at the conclusion of testing unless, the manufacturer specifically requests the return of the samples. The request for return must accompany the initial component

19 Page 19 of Manufacturing and Production Tests The manufacturer agrees to conduct the following Manufacturing and Production Tests as specified: Required Tests NA

20 Page 20 of Revision Summary The following changes are in compliance with the declaration of Section 8.1: Date/ Project Handler/ Proj # Site ID Reviewer Section Item Description of Change None