SBR03. Setpoint device for 635 / 637 series. Product Manual E-V0205.DOC

Transcription

1 SBR03 Setpoint device for 635 / 637 series Product Manual E-V0205.DOC

2 Further descriptions, that relate to this document: U: Product - Manual U: Product - Manual U: Product - Manual U: f - Product - Manual SSD Drives Gmb. All rights reserved. No portion of this description may be produced or processed in any form without the consent of the company. Changes are subject to change without notice. SSD Drives has registered in part trademark protection and legal protection of designs. The handing over of the descriptions may not be construed as the transfer of any rights. Made in Germany, Product Manual Type: SBR E-V0205.DOC

3 CONTENTS page The most important thing first Description Possible applications; As a separate setpoint source As test adapter ayout of the plugs and switches Dimensions Terminal assignment Update list E-V0205.DOC Product Manual Type: SBR03 3

4 The most important thing first Thanks for your confidence choosing our product. These operating instructions present themselves as an overview of the technical data and features. Please read the operating instructions before operating the product. If you have any questions, please contact your nearest SSD Drives representative. Improper application of the product in combination with dangerous voltage can lead to injuries. In addition, damage can also occur to motors or other products. Therefore please observe our safety precautions strictly. Safety precautions We assume that, as an expert, you are familiar with the relevant safety regulations, especially in accordance with VDE 0100, VDE 0113,VDE 0160, EN 50178, the accident prevention regulations of the employers liability insurance company and the D regulations and that you are able to use and apply them. As well, relevant European Directives must be observed. Depending on the kind of application, additional regulations e.g. U, D are subject to be observed. If our products are operated in connection with components from other manufacturers, their operating instructions are also subject to be observed strictly. 4 Product Manual Type: SBR E-V0205.DOC

5 1 Description The setpoint device is a start-up aid for the SSD Drives servo drives, 635 and 637 series 1.1 Possible applications; As a separate setpoint source All s can be operated with switches. All s are displayed with ED`s (For this, the switch must be in position "an 0.16") In this way, the s of the 635/637 series are supplied with the auxiliary voltage +12 V. Speed setpoint = 0-10 V Current limit = 0-5 V As test adapter In order to test or display signals resp., between the (635/637 series) 0 and the PC. For this, all switches with label must also be or. This way all signals are looped through from to X0. You can now test on the sockets and all s are displayed, respectively. (For this, the switch must be in position "an ") The switch 0.21 is protected against accidental use. ift the lever switch before switching! CAUTION E-V0205.DOC Product Manual Type: SBR03 5

6 2 ayout of the plugs and switches Ausschnitt (Rückansicht) cutout (rear view) X0 und X 0 o o 2 AKTIV BEREIT WARNUNG AKTIV OK. OUT V (rot) (red) ED`s X 1 o o Poti Poti + - an OUT an STROMGRENZE DREZA V 0V (blau) (blue) (schwarz) (black) (blau) (blue) (rot) (red) (weiß) (white) (weiß) (white) (rot) (red) (weiß) (white) Achtung: Verriegelungsschalter Schalterhebel vor dem Umschalten anheben Attention: interlocking switch lift the lever switch before switching Drehknopf rotary button Schalter switches (schwarz) (black) Bananenbuchse banana socket 3 Dimensions Side view Front view all dimensions in "mm" 6 Product Manual Type: SBR E-V0205.DOC

7 4 Terminal assignment X0 - and - connection (with - all switches on ) P Function Designation evel 2 = +12V 10.2 = open 3 auxiliary voltage 4 = +12V 10.4 = open 5 reference point to V signal from test socket MP2 7 optional 8 READY ED yellow 9 reference point for 0V PC s 10 ground 11 = +12V = open 12 OUT ED green OUT ED green = +12V = open 15 = +12V = open 16 auxiliary voltage stabilized auxiliary voltage -12VDC 17 speed signal from test socket MP1 18 speed V setpoint 19 current limit V 20 WARNG ED red 21 supply for V DC s 22 ACTIVE = active = inactive 23 ACTIVE OK. ED yellow 24 = +12V = open 25 = +12V = open Note: The load of the (635 / 637 series) s via ED`s with stand alone = 5 ma (X0), with operation of (24V) = 10 ma E-V0205.DOC Product Manual Type: SBR03 7

8 5 Update list Version Amendment Chapter Date Name Remarks V01.16E97 None K. Stadler ET-design V0205 separate German / all ogos English SSD Drives N. Dreilich 8 Product Manual Type: SBR E-V0205.DOC

9