BCU070-L technolon Switch Interface. Application. BCU070-L technolon Switch Interface. Product description
|
|
- Michael McGee
- 5 years ago
- Views:
Transcription
1 Issue Datasheet EN pplication The technolon switch interface binary controller for flush mounting, 7 BI / 2 BO. Bus-capable switch interface with open communication using the LON Talk protocol for integration into any standard switching program. Suitable for accepting 7 potential-free contacts. lso, 2 binary switching outputs for feedback signals, suited for switching feedback LEDs or relays in compliance with workplace regulations. Standard software application in accordance with LonMark profiles 3200 "Switch", 3250 "Scene Panel" and 3040 "Lamp ctuator". Interface module in a compact housing for mounting flush with the wall, in a cavity wall or in wall boxes behind any standard switch. Plugin connection wires for simple installation. Configuration using the user-friendly and standardized LNS3 plug-in in conjunction with an LNS3-based network management tool. Contents Page Important Information on Product Safety...2 Item...3 Technical data...3 Dimensions...3 Connection...4 Installation...5 Functional profile/network variables...6 Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения - változtatások jogát fenntartjuk - 保留未经通知而改动的权力 Kieback&Peter GmbH & Co. KG Tempelhofer Weg 50, Berlin/Germany Telefon: , Telefax: info@kieback-peter.com
2 Important Information on Product Safety Safety Instructions This data sheet contains information on installing and commissioning the product "BCU070-L technolon -Tasterschnittstelle". Each person who carries out work on this product must have read and understood this data sheet. If you have any questions that are not resolved by this data sheet, you can obtain further information from the supplier or manufacturer. If the product is not used in accordance with this data sheet, the protection provided will be impaired. pplicable regulations must be observed when installing and using the device. Within the EU, these include regulations regarding occupational safety and accident prevention as well as those from the VDE (ssociation for Electrical, Electronic & Information Technologies). If the device is used in other countries, it is the responsibility of the system installer or operator to comply with local regulations. Mounting, installation and commissioning work on the devices may only be carried out by qualified technicians. Qualified technicians are persons who are familiar with the described product and who can assess given tasks and recognize possible dangers due to technical training, knowledge and experience as well as knowledge of the appropriate regulations. Meaning of the Symbols WRNING Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided. CUTION Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided. NOTICE Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not avoided. Note Indicates additional information that can simplify the work with the product for you. Notes on Disposal For disposal, the product is considered waste from electrical and electronic equipment (electronic waste) and must not be disposed of as household waste. Special treatment for specific components may be legally binding or ecologically sensible. The local and currently applicable legislation must be observed. Page 2 / 6
3 Item BCU070-L technolon switch interface Technical data Nominal voltage Inputs Outputs Bus connection Standards Displays Degree of protection C 24 V; 2.9 V / DC 24 V, 1.2 W 7 binary inputs (BI) for potential-free contacts, 5 m 2 binary outputs (BO), DC 24 V, 20 m LON FTT10 LonMark functional profile 3200 "Switch", 3250 "Scene Panel", 3040 "Lamp ctuator" 1 service PIN LED, red IP20 (when built in) mbient temperature 0 to 45 C mbient humidity 20 to 80% r. h., non-condensing Dimensions WxHxD mm 50x50x19 Weight 0.05 kg Dimensions 50,0 19,0 50,0 Page 3 / 6
4 Connection B LON 24 V C/DC BCU070-L K8 bn K9 rt K1 bn K2 rt K3 or K4 gb K5 gn K6 bl K7 ws Example K1 K8 R* R* = 24V - ULED ILED NOTICE must not be connected to the supply voltage. Note n R* series protective resistor is required to control the LED. This R* series protective resistor is integrated into most switch assemblies. Page 4 / 6
5 Installation CUTION Mounting/demounting may only be carried out by qualified technicians when the voltage is switched off. Note Deep flush-mount boxes (> 60 mm) are required when a switch and the BCU070-L are used together. Recommendation for installation in cavity walls: Spelsberg HW 065 device connection box IP30, order no LON 24V Page 5 / 6
6 Functional profile/network variables Status feedback nvirequest SNVT_obj_request nvofiledirectory SNVT_address CP-Filedirektory nvoinoutstate SNVT_state Status input/output Remote control nvisetoutput SNVT_state nvostatus SNVT_obj_status Status info SCPTinstallDate SCPTlocation Node Objekt 0000 Switch feedback nviswitchfb nvoswitch nvosetting SNVT_setting Switch output SCPTinvrtOut SCPTmaxSendTime UCPTsblndShortRunTm UCPTsecFktDelay UCPTswitchMode S CPTstepValue 7 x Switch 3200 Lamp value nvilampvalue nvolampvaluefb Lamp value feedback UCPTactuatorMode 2 x Lamp ctuator 3040 nvooffswitch nvoonswitch Only off Only on UCPTinCannelNmbr UCPTsecFktDelay Central Control nvooccup SNVT_occupancy Occupied message UCPTinCannelNmbr UCPTsecFktDelay Occupancy Sensor 1060 nvoscene SNVT_scene Scene output UCPTsecFktDelay SCPTsceneNmbr UCPToffScene UCPTonScene UCPTSceneChannel Scene panel 3250 Page 6 / 6
Important Information Regarding Product Safety...2 Item...3 Technical Data...3 Dimensions...4 Connection...4 Mounting...5 Maintenance...
Issue 2013-10-24 Datasheet 1.40-21.450-01-EN Room Humidity/Temperature Sensor pplication The room humidity/temperature sensor with an integrated measurement converter is used for measuring the relative
More informationSBM51/04 Switch cabinet bus module For M-Bus with 32 counters
Issue 2012-08-28 Datasheet 2.50-40.051-31-EN Switch cabinet bus module For M-Bus with 32 counters pplication The switch cabinet bus module is used to connect a maximum of 32 counters for external equipment
More informationDDC110S Room Control Modul With LCD Display
Issue 2012-01-26 Datasheet 1.10-31.110-01-EN Room Control Modul With LCD Display nwendung The bus-capable room control module with LCD display is used as part of the DDC3000 and DDC4000/BMR automation
More informationIT554 VPN Router IT554. Product Description
Issue 2011-11-08 Datasheet 4.30-50.554-01-EN VPN Router pplication is a VPN router with client functionality and customized software that enables the secure transfer of encrypted data between controllers
More informationTPC56 Display and operator panel
Issue 2013-06-26 Datasheet 2.70-10-456-01-EN Display and operator panel pplication The is a remote display and operator panel for BMR410 and DDC420. It has an active matrix color LCD touchscreen with a
More informationRBW301-C, RBW302-C, RBW304-C, RBW305-C Room Control Module
Issue 2011-04-01 Datasheet 1.10-60.010-01-EN Room Control Module pplication are room control modules with displays for connecting to RCC200-L or RCN200-L room controllers. Different variants with a graded
More informationGLT-D004-TFA4 Color Ink Jet Printer A4
Issue 2012-08-13 Datasheet 4.65-20.004-11-EN Color Ink Jet Printer 4 pplication You can use the printer described in this document to print documents (for example plant schematics and trend curves) from
More informationHT12, HTF12 Room humidity/temperature sensor
Issue 2016-11-09 Datasheet 1.40-20.012-01-EN Room humidity/temperature sensor pplication The HT12 and HTF12 are used for continuous measurement the relative humidity and room temperature in homes and offices.
More informationTD11..15, TDF Room Temperature Sensors
Issue 2011-08-30 Datasheet 1.10-10.010-01-EN Room Temperature Sensors pplication TD11..15 and TDF12..15 are used to measure the room temperature. The temperature sensors are used in conjunction with all
More informationTLD1..TLD4 Duct Temperature Sensors
Issue 2015-07-08 Datasheet 1.10-11.010-01-EN Duct Temperature Sensors pplication The sensors are used as controlled variable sensors for duct installation in all outside-temperature controlled or fixed-value
More informationRCN200-L Room Controller
Issue 2014-10-30 Datasheet 2.80-30.200-01-EN Room Controller pplication The is a LON bus-capable room controller for energy-efficient temperature, air quality and humidity control. It can be used with
More informationGLT-M002-GLTM GLT-M002-GLTM. Product Description
Issue 2011-07-19 Datasheet 4.70-10.013-01-EN pplication The GSM modem connects the building management system to the DDC system of the operational plant via the cellular network. The DDC system can then
More informationBMD4032 Input/output module
Issue 2015-08-21 Datasheet 2.60-70.02-01-EN Input/output module pplication The input/output module with 2 digital inputs or outputs receives System 000 binary signals and activates binary control functions.
More informationCommissioning. IT554 VPN Router
Issue 2012-01-23 Datasheet 4.30-50.554-11-EN VPN Router pplication is a VPN router with client functionality and customized software that enables the secure transfer of encrypted data between controllers
More informationSBM52/04 Input / Output Module For M-Bus with 99 counters
Issue 2014-11-19 Datasheet 2.50-40.052-31-EN Input / Output Module For M-Bus with 99 counters pplication The is used to connect a maximum of 99 meters for external equipment to DDC controller DDC3000/DDC4000
More informationRCN122-L technolon Room Controller. Application. RCN122-L technolon Room Controller. Product Description
Issue 2014-10-20 Datasheet 2.80-10.222-01-EN pplication The is a bus-communicating room controller for fan convectors, with heating and cooling coils and blind control for fan coil applications. It communicates
More informationFBS51/04 Gateway-Module For M-Bus with 6 counters
Issue 2014-11-26 Datasheet 2.50-40.151-01-EN Gateway-Module For M-Bus with 6 counters pplication The Gateway Module is used to connect a maximum of 6 meters of external equipment to the BMR or DDC420 via
More informationNOTE Hinweis: Note the special features of firmware updates provided by EPROM-Tausch (see page 4).
Issue 2014-11-19 Datasheet 2.50-40.051-31-EN Switch cabinet bus module with M-Bus input for 32 counters pplication The switch cabinet bus module is used to connect a maximum of 32 counters for external
More informationRCN132-L, RCN132-L-S1 technolon Room Controller
Issue 2014-10-21 Datasheet 2.80-10.232-01-EN technolon Room Controller pplication The is a bus-communicating room controller for VV (variable-air-volume) damper control with heating and cooling coils and
More informationFBM034 and FBM034W Fieldbus Input Modules
Issue 2014-10-01 Datasheet 2.50-30.034-31-EN FBM034 and FBM034W Fieldbus Input Modules pplication With four analog inputs, fieldbus input modules FBM034 und FBM034W record the signals of remote devices
More informationRCN155-L, RCN151-L Room controller
Issue 2018-05-03 Datasheet 2.80-10.155-01-EN Room controller pplication The is a room controller for stand-alone use or use in a LON network. For direct communication with other LON components, the is
More informationTPC35 Display and operator panel
Issue 2014-08-06 Datasheet 2.70-10-435-01-EN Display and operator panel pplication The is a remote display and operator panel for BMR410 and DDC420. It has an active matrix color LCD touchscreen with a
More informationTPC84 Display and Operator Panel
Issue 2014-08-06 Datasheet 2.60-10.084-01-EN Display and Operator Panel pplication The is a remote display and operator panel. It has an active matrix color LCD touchscreen with a screen size of 21,3 cm
More informationFBM018 and FBM018W Fieldbus Input Modules
Issue 2014-05-27 FBM018 and FBM018W Fieldbus Input Modules pplication With 8 digital inputs, the FBM018 und FBM018W Eingabe-Modul Feldbus record the signals from remote devices in DDC3000 and DDC4000/BMR
More informationRCW11x-L Room Controller Technolon. Application. Product Description. RCW11x-L Room Controller Technolon
Issue 2008-04-03 Datasheet 2.80-20.100-01-EN pplication The technolon room controllers RCW112-L, RCW113-L, RCW115-L, RCW116-L enable you to control the temperature of individual rooms by means of radiator,
More informationRCN420-B Room controller
Issue 2017-07-20 Datasheet 2.80-30.420-01-EN Room controller pplication The is a Cnet-capable room controller for energy-efficient temperature, air quality and humidity control. It can be used with customer-specific
More informationFBU410 Input/ Output Modulel
Issue 2016-10-12 Datasheet 2.50-30.410-01-EN Input/ Output Modulel pplication The Ein-usgabe-Modul with 4 relay outputs and 6 universal inputs/outputs controls and records the signals of remote devices
More informationBMR410 Controller BMR410. Product Description
Issue 2011-04-27 Datasheet 2.70-10.411-01-EN Controller pplication The is a DDC controller for regulating, controlling, monitoring and optimizing heating, ventilation and air conditioning systems. The
More informationIT560 VPN router IT560. Commissioning
Issue 2018-02-22 Datasheet 4.30-50.560-11-EN VPN router pplication is a VPN router with server functionality and customized software that enables the secure transfer of encrypted data between controllers
More informationTPC70Display and Operator Panel
Issue 2017-09-13 Datasheet 2.60-10.070-01-EN Display and Operator Panel pplication The is a remote display and operator panel. It has a color TFT touchscreen with a screen size of 7 / 17,8 cm. The can
More informationRCC200-L Room Controller
Issue 2014-04-14 Datasheet 2.80-20.200-01-E Room Controller pplication The is a O bus-capable room controller for energy-efficient temperature, air quality and humidity control. It can be used with onmark-compliant
More informationImportant Information Regarding Product Safety...2 Item...3 Technical Data...3 Installation Dimensions...4 Mounting...5 Connection...
Issue 20160127 Datasheet 2.5010.20001EN Controller pplication The is a central control unit for closedloop and openloop control, optimizations and monitoring functions. The controller meets the following
More informationDDC4200e Automation Station with Operator Function
Issue 2014-07-08 Datasheet 2.60-10-210-01-EN utomation Station with Operator Function pplication Color touchscreen with BCnet communication Standalone station with operator function for closed-loop and
More informationDDC420 Automation Station
Issue 2016-09-26 Datasheet 2.70-10.420-01-EN utomation Station pplication is a controller for closed-loop and open-loop control, monitoring and optimizing heating, ventilation and air conditioning systems.
More informationDDC4200e Controller with Operator Function
Issue 2017-04-13 Datasheet 2.60-10-210-01-EN Controller with Operator Function pplication Color touchscreen with BCnet communication Standalone station with operator function for closed-loop and open-loop
More informationGLT2200N BMS Network Operator Station
Issue 2011-10-21 Datasheet 4.10-20.200-36-EN BMS Network Operator Station pplication BMS network operator station for higher-level building management functions and for connecting controllers. Content
More informationNeutrino-GLT Server BACnet TM Protocol Implementation Conformance Statement (PICS) Version 3
Issue date: 2005-05-01 data sheet 4.10-10.701-03-en BCnet TM Protocol Implementation Conformance Statement () Version 3 Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications
More informationDDC4200 BACnet TM Protocol Implementation Conformance Statement (PICS) Version 1
Issue date: 2008-05-12 data sheet 2.60-10.200-03-en DDC4200 BCnet TM Protocol Implementation Conformance Statement () Version 1 Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications
More informationSBM51/05 gateway module for Berg network monitoring
Issue 2016-09-08 Datasheet 2.50-40.051-52-EN gateway module for Berg network monitoring pplication The gateway module with an RS485 connection is used to connect up to 8 Berg network monitoring components
More informationNote: Note the changed parameter functions due to firmware updates (see page 5).
Gateway Module for Danfoss Frequency Inverters pplication With the gateway module, you can connect up to eight Danfoss frequency inverters (FIs) of various types using the Danfoss bus with the DDC3000/DDC4000
More informationBMF400 Input/output module
BMF400 Input/output module Input/output module with six universal inputs/outputs and four floating relay outputs for function extensions of the BMR bus module controller. Issue date: December 6, 2006 Subject
More informationRBU130-RJ/sw, RBU130-RJ/ws Room Controllers
Issue 2016-08-02 Datasheet 2.80-30.130-01-EN Room Controllers pplication The RBU130-RJ/sw and RBU130-RJ/ws room controller provide precise comfort zone control for temperature, fan speed, lighting and
More informationROUTER-2SHDSL-RAIL-001/01
Issue 2017-04-19 User Information Datasheet 4.30-50.027-85-EN ROUTER-2SHDSL-RAIL-001/01 ROUTER-2SHDSL-RAIL-001/01 Application The ROUTER-2SHDSL-RAIL-001/01 contains two SHDSL drivers and a four-port switch.
More informationNeutrino-GLT Client BACnet TM Protocol Implementation Conformance Statement (PICS) Version 4
Issue date: 20050501 data sheet 4.1010.70104en BCnet TM Protocol Implementation Conformance Statement () Version 4 Änderungen vorbehalten Contents subject to change Sous réserve de modifications Reservado
More informationActuating drive with spring return DSFY/16 Modulated actuating drive with spring return
ctuating drive with spring return DSFY/16 Modulated actuating drive with spring return Issue date: Feb. 27, 2006 Subject to change Contents Page Information about the device description... 2 Qualified
More informationDDC110-L1.. DDC110-L4 technolon Room Module
technolon Room Module DDC110-L1, DDC110-L2, DDC110-L3 and DDC110-L4 Single room control or room display and service module for single-room control in the LON network. With display of the room temperature
More informationDDC4200 (Firmware ) BACnet Protocol Implementation Conformance Statement (PICS) PICS DDC4200. Date:
Issue 2011-05-17 Datasheet 2.60.10.200-05-EN (Firmware 1.0.20) BCnet Protocol Implementation Conformance Statement () Date: 2011-05-17 Vendor Name: Kieback&Peter GmbH & Co. KG Product Name: DDC4000 Product
More informationManual Release 09/2002. cm-lon FOR LOGO! Communication with LOGO! with LON systems
Manual Release 09/2002 cm-lon FOR LOGO! Communication with LOGO! with LON systems s LOGO! Expansion Module Manual Chapters Safety Notices 1 Getting to know 2 Mounting and wiring the 3 Putting the into
More informationWireless Small Actuator MAC-WSA
Wireless Small Actuator MAC-WSA MAC-WSA Wireless Small Actuator Application Wirelessly controlled, battery-powered small actuator for continuous closed-loop control systems. For thermostat valve bodies
More informationContents Notice about the device description...page 2. Device description
FBM6U Field Bus Modul with 4 Relay outputs and 4 digital inputs as well as a connection to a FSM0//4/6 FieldBusModule FBM6U with four relay outputs and four digital inputs as well as connection of a FrontSwitchingModule
More informationTechnical Datasheet clima RCM-FC 1. Product description
Technical Datasheet 1. Product description The is a room control panel with an integrated temperature sensor for measuring the room temperature. The device is featured with a turn wheel to adjust the set
More informationCompact I/O Module XIO-4AO LON ANALOG OUTPUT MODULE
ompact I/O Module XIO-4AO LON ANALOG OUTPUT MODULE INSTALLATION INSTRUTIONS Terminal Blocks: Supply and Bus: 16 AWG (1.5 mm²). (terminal block and strapping plug included with packing). Analog Outputs:
More informationLX Series Remote Input/Output (I/O) Controller
LX Series Remote Input/Output (I/O) Controller Product Bulletin LX-IO520-1, LX-IO401-1, LX-IO301-1 Code No. LIT-12011491 Issued June 22, 2009 The LX Series Remote Input/Output (I/O) controller extends
More informationEnglish. Operating manual. Universal transmitter UT125. Save for later reference. Companies / brands of GHM
English Operating manual Universal transmitter UT125 Companies / brands of GHM www.ghm-messtechnik.de Save for later reference. Table of contents page 1. Intended use (areas of application)... 3 1.1 Safety
More information1201L-1K RTD Controller. Revision 1.1. Nico Technology Ltd. 1 Rev.1.1
1201L-1K RTD Controller Revision 1.1 Nico Technology Ltd. 24F,No.37,SanMin Rd, 2.Sec, PanChiao City, Taipei County, Taiwan Phone +886-2-2954-5338 Fax +886-2-2954-5308 Product Info Thomas@nico-tech.com
More informationLON I/O Module DR-N 8S-10A Art. no.:mtn881801
Art. no.: MTN881801 User Manual LON I/O Module DR-N 8S-10A Art. no.:mtn881801 Directory Directory...1 1. Description...2 2. Function...3 3. Installation...3 4. Technical data...5 5. Application description...6
More informationType Quickstart (from device Version 2)
Type 8022 Flow Transmitter / Pulse divider Durchflusstransmitter / Impulsteiler Transmetteur de débit / Diviseur d impulsions We reserve the right to make technical changes without notice. Technische Änderungen
More informationRoom unit with PPS2 interface
1 641 DESIGO RX Room unit with PPS2 interface for use with: QAX321 devices of the ranges DESIGO RXC, RXB, and RXA (PPS2) DESIGO PX Automation stations 1) devices with a PPS2 interface Room temperature
More informationTechnical Datasheet clima RCM-CC
Technical Datasheet 1. Product description The is a room control panel with an integrated temperature sensor for measuring the room temperature. The device is featured with a turn wheel to adjust the set
More informationPTB 01 ATEX 2064 U, IECEx PTB U. Example / Beispiel / Exemple: Type Operating Instructions
, Equipment protection fuse with Ex mb II C Gb approval Geräteschutzsicherung mit Zulassung Ex mb II C Gb Fusible de protection d appareil avec homologation Ex mb II C Gb Example / Beispiel / Exemple:
More informationProduct Model Number: Application Software Version: Firmware Revision: BACnet Protocol Revision: 1.12 (BACnet ANSI/ASHRAE Rev.
Issue 2014-04-29 Datasheet 2.60.10.400-03-EN (Software 1.11.8) BCnet Protocol Implementation Conformance Statement () Date: 2014-04-29 Vendor Name: Kieback&Peter GmbH & Co. KG Product Name: DDC4000 Product
More informationB63/ NS MS. EtherNet/IP LINK
3 609 929 B63/ IMenip 2008-09 NS MS EtherNet/IP LINK 3 609 929 B63/2008-09 IMenip Bosch Rexroth AG 15/76 Table of Contents About this document................. 16 General safety instructions............
More informationLRC 5038/10 Helio 8 way light controller switching only
Helio 8 way light controller switching only 1/5 Product details general The LRC5038/10 (also known as 8LS switching only) is a LonWorks light controller with eight configurable outputs, two pairs of sensor
More informationApplications Application is compatible with Q1 Hardware. Compatible with any supply/exhaust fans or space heating/cooling equipment. Will control up to 8 individual spaces on a single controller. A cost
More informationIF-80x Outdoor Terminal
95-10330_IF-800 V2016-10-20 Outdoor Terminal IF-80x Outdoor Terminal 1 IF-800 Outdoor / IF-801 We are pleased that you have decided to use a terminal of the IF-80x series for recording access data. Scope
More informationAccess Terminal IF-800
95-10287 IF-800_1312_3 Access Terminal IF-800 1 Slave Terminal IF-800 Thank you for using a terminal of the series IF-800 for recording access data. Scope of Delivery: Slave terminal IF-800. I/O controller
More informationSoftware description. e.control lumina T6 Binary Input Module (flush mounting) SC EC_13.* Page 1. Software description.
Software description lumina T6 Binary Input Module (flush mounting) SC 006EC_3.* Software description This document describes the behaviour and parameterisation of the software application listed below.
More informationInstallation Instructions
Dual EIB bus coupler Order no.: 1246 651, 1246 661, 1246 671 rmation The Gira SmartSensor is a product of the Instabus KNX/EIB System and complies with KNX/EIBA directives. The functions of the device
More informationField module for cold locations for installation in refrigerators for direct control of a pulsed expansion valve
FKE003 Field module for cold locations for installation in refrigerators for direct control of a pulsed expansion valve Features Operation of electronic expansion valves pulsed via integrated electronic
More informationOperating Instructions (Translation) 3. Safety Information. 1. Description. 2. Explosion Protection. Supply module Type 17-21BB-170x
1. Description The supply module was developed specially for direct mounting in hazardous areas in Zone 1 and 21 and is ATEX-certified. The supply module is a permanently installed piece of electrical
More informationRoom unit with PPS2 interface
1 642 Desigo RX Room unit with PPS2 interface for use with: QAX33.1 devices of the ranges Desigo RXC, RXB, RXL, and RXA (PPS2) Desigo PX Automation stations 1) devices with a PPS2 interface Room temperature
More informationTechnical Datasheet clima BSK4-F / BSK4-F230 NK mêççìåí=çéëåêáéíáçå
Technical Datasheet clima BSK4-F / BSK4-F230 NK mêççìåí=çéëåêáéíáçå The modules clima BSK4-F and clima BSK4-F230 are used as actuators to integrate up to 4 fire dampers or smoke dampers with spring return
More informationOperating instructions. Standstill monitor A / / 2011
Operating instructions Standstill monitor A300 UK 1 2 3 4 5 6 7 8 7390337 / 01 02 / 2011 1 2 3 4 5 6 7 8 switchpoint min max pulse/min power Made in Germany ifm electronic gmbh D 45127 Essen func. I II
More informationSoftware Application wrf08_03 (Lighting, Blinds, Air-Conditioning Control) For model WRF08 T6 T8 T5 T6 T7 T8. Messwert Value
wrf08_03 Software Application wrf08_03 (Lighting, Blinds, Air-Conditioning Control) For model WRF08 The multi-function room operating panel WRF08 is designed for temperature detection and integrated control
More informationEnglish. Operating Manual. Conductive point level switch MLR120. Retain for later reference. Companies / brands of GHM
English Operating Manual Conductive point level switch MLR120 Companies / brands of GHM www.ghm-group.de Retain for later reference Table of contents Page 1. Proper use (application areas)... 3 Safety
More informationOperating Instructions. Isolation Relay for Switches Model: RL manual_rl-6100_1116
Operating Instructions Isolation Relay for Switches Model: RL-6100 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...3 5. Operating Principle...4 6. Mechanical Connection...4
More informationTAC Xenta 121-HP Programmable Heat Pump Application
TAC Vista TAC Xenta 121-HP Programmable Heat Pump Application TAC Xenta 121-HP is an easily programmable controller intended for heat pumps, with or without re-heat. It can be configured for use with 1,
More informationRhino Redundancy Module PSM24-REM360S. Operating Instructions
Rhino Redundancy Module PSM4-REM360S Operating Instructions RHINO REDUNDANCY MODULE PSM4-REM360S Description With this module and two power supplies of the PSM series (78, 90, 56, 80 and 360 watt models),
More informationCompact Universal Controllers
7 865 ISO9001 RWF40... complete with housing Compact Universal Controllers RWF40... The RWF40... is a universal digital boiler temperature / pressure controller with functions designed specifically for
More informationCMC III Universal Sensor
CMC III Universal Sensor DK 7030.190 Assembly and operating instructions Foreword Foreword Dear Customer, Thank you for choosing our CMC III universal sensor (referred to hereafter as "universal sensor")!
More informationExtension module for lighting control
s 3 842 DESIGO RXC Extension module for lighting control Extension to the RXC30 / RXC31 / RXC38 room controller RXC40.1 RXC40.5 The RXC40 extension module is used in conjunction with an RXC30, RXC31 or
More informationCMC III Temperature/Humidity Sensor
CMC III Temperature/Humidity Sensor DK 7030.111 Assembly and operating instructions Foreword Foreword Dear Customer, Thank you for choosing our CMC III temperature/humidity sensor (referred to hereafter
More informationekey home OPERATING INSTRUCTIONS
ekey home en OPERATING INSTRUCTIONS English Translation of the original instructions - ID2245170369 Table of contents General... 2 Note... 2 Product liability and limitation of liability... 2 Warranty
More informationOperating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
More informationAnalog display for resistance current
www.reinhausen.com Analog display for resistance current Operating Instructions BA 2220061/01 NOTE The product may have been modified after this document went to press. We expressly reserve the right to
More informationOperating instructions Safe AS-i input module ASIM-C-M About this document. Content
7 Set-up and maintenance 7.1 Functional testing....10 7.2 Maintenance...10 EN Operating instructions.............pages 1 to 6 Original 8 Disassembly and disposal 8.1 Disassembly....10 8.2 Disposal...10
More informationLine reactors SINAMICS. SINAMICS G130 Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation
Safety information 1 General 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.7 04/2014 A5E00331462A Legal
More informationType MS04. Redox potential sensor cube. Operating Instructions
Redox potential sensor cube Operating Instructions We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques. Bürkert SAS,
More informationType ME43. Quickstart
Type ME43 Fieldbus gateway büs to Industrial Ethernet, PROFIBUS DPV1, CC-Link Feldbus-Gateway büs zu Industrial Ethernet, PROFIBUS DPV1, CC-Link Passerelle bus de terrain büs vers Ethernet industriel,
More informationEnglish. Operating manual. Limit switch GS125. Keep for future reference. Ventures / brands of GHM
English Operating manual Limit switch GS125 Ventures / brands of GHM www.ghm-messtechnik.de Keep for future reference. Table of contents Page 1. Intended use (areas of application)... 3 1.1 Safety signs
More informationSerial PROFIBUS Interface
Installation Manual Serial PROFIBUS Interface Version: EN-062016-2.3 Copyright 2016 Softing Industrial Automation GmbH Disclaimer of liability The information contained in these instructions corresponds
More informationIB IL 120 DI 1. Function. INTERBUS Inline Terminal With One Digital Input in the 120 V AC Voltage Area. Data Sheet 5764B
INTERBUS Inline Terminal With One Digital Input in the 120 V AC Voltage Area Data Sheet 5764B 09/2000 # % $ This data sheet is only valid in association with the INTERBUS Inline System Manual IB IL SYS
More information1-channel shutter actuator 6A UP Installation Instructions
2-channel switching actuator 6A UP 1-chan. universal dimming actuator 210 W 1-channel switching actuator 16A UP Order no.: 1047 00 Order no.: 1057 00 Order no.: 1058 00 Order no.: 1059 00 System rmation
More informationDORMA. Installation Manual Extension kit I/O module in the B6L 4P
DORMA Installation Manual Extension kit I/O module in the B6L 4P Contents Contents 1 General information......................... 3 1.1 Preface................................. 3 1.2 Correct use.............................
More informationFlexoled FTP3HP RGB LED DMX Driver
Flexoled FTP3HP RGB LED DMX Driver User Manual + 12-24V DMX INPUT DMX OUTPUT DC IN (12A MAX) DMX ADDRESS & DIMMER SETTINGS SWITCH 10 11 12 DMX MODE DIMMING MODE BUILT-IN MODE LOAD 4A PER CHANNEL (12A MAX)
More informationDocumentation ZB8610. Fan cartridge for EtherCAT and Bus Terminals. Version: Date:
Documentation Fan cartridge for EtherCAT and Bus Terminals Version: Date: 1.5 2017-08-07 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1.2 Safety instructions...
More informationOriginal operating instructions Fail-safe inductive sensor GF711S / / 2013
Original operating instructions Fail-safe inductive sensor GF7S 8528 / 5 / 23 Contents Preliminary note...3. Explanation of symbols...3 2 Safety instructions...4 2. Safety-related requirements regarding
More informationOperating instructions Enabling switch (handle switch) ZSD5 ZSD6. 1. About this document. Content. 7 Appendix 7.1 Wiring example...
7 ppendix 7.1 Wiring example...5 8 Declaration of conformity 8.1 EC Declaration of conformity...6 Operating instructions.............pages 1 to 6 Translation of the original operating instructions x.000
More information1 IF-810 or IF-811 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-810/IF-811
95-10326_V2016-10-20 IF-810/IF-811 1 IF-810 or IF-811 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-810 or IF-811 terminal (slave), you have purchased a reliable device for capturing
More information1 IF-812 or IF-815 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-812/IF-815
95-10324_V2016-11-23 IF-812/IF-815 1 IF-812 or IF-815 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-812 or IF-815 terminal (slave), you have purchased a reliable device for capturing
More information