Important Information Regarding Product Safety...2 Item...3 Technical Data...3 Installation Dimensions...4 Mounting...5 Connection...

Transcription

1 Issue Datasheet EN Controller pplication The is a central control unit for closedloop and openloop control, optimizations and monitoring functions. The controller meets the following requirements: Manual operator control level with push buttons and illuminated LCD display Direct connection to BMS central operating stations or modem connection, enabled via 16 binary inputs, 8 binary outputs and 8 optional connections usable as either binary inputs or outputs, 16 analog inputs, 8 analog outputs. 12 DDC control loops for heating / ventilation, expandable to 21 DDC control loops via the DDC software menu for fixed setpoints Functional expansion via DDC software menus Comprehensive PLCfunctions with 499 flags, 99 timers as well as time programs Bidirectional data exchange of up to 99 DDC central control units (peertopeer) Permanent system monitoring of the bus communication and all connected DDC components Setting of customized plain texts for every parameter Error / malfunction message memory, event log with date and time utomatic summer / winter time switching Interactive dialog in the plain text for the query and entry of the DDC data, such as current values, setpoints and times Full operation of the entire DDC System via every connected DDC central control unit (remote control) without additional equipment Memory of trend values readable via modem DDC controller with an optional maximum load limit (EMax function) Content Page Important Information Regarding Product Safety...2 Item...3 Technical Data...3 Installation Dimensions...4 Mounting...5 Connection...6 Änderungen vorbehalten Contents subject to change Sous réserve de modifications Reservado el derecho a modificación Wijzigingen voorbehouden Con riserva di modifiche Innehåll som skall ändras Zmeny vyhradené Změny vyhrazeny Zmiany zastrzeżone Возможны изменения változtatások jogát fenntartjuk Kieback&Peter GmbH & Co. KG Tempelhofer Weg 50, Berlin/Germany Telefon: , Telefax: info@kiebackpeter.com

2 Datasheet EN Issue Important Information Regarding Product Safety Safety Instructions This data sheet contains information on installing and commissioning the product "". Each person who carries out work on this product must have read and understood this data sheet. If you have any questions that are not resolved by this data sheet, you can obtain further information from the supplier or manufacturer. If the product is not used in accordance with this data sheet, the protection provided will be impaired. pplicable regulations must be observed when installing and using the device. Within the EU, these include regulations regarding occupational safety and accident prevention as well as those from the VDE (ssociation for Electrical, Electronic & Information Technologies). If the device is used in other countries, it is the responsibility of the system installer or operator to comply with local regulations. Mounting, installation and commissioning work on the devices may only be carried out by qualified technicians. Qualified technicians are persons who are familiar with the described product and who can assess given tasks and recognize possible dangers due to technical training, knowledge and experience as well as knowledge of the appropriate regulations. Legend WRNING Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided. CUTION Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided.! CUTION Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not avoided. NOTE Indicates additional information that can simplify the work with the product for you. Notes on Disposal For disposal, the product is considered waste from electrical and electronic equipment (electronic waste) and must not be disposed of as household waste. Special treatment for specific components may be legally binding or ecologically sensible. The local and currently applicable legislation must be observed. Page 2 / 6

3 Issue Datasheet EN Item Controller Technical Data Nominal voltage Fuse protection Inputs Outputs Inputs / Outputs Displays and operating elements Interfaces Bus connection Processor Memory for DDC central control unit: C 24 V ± 10 %; Hz; 20 V; 0.8 for inputs and outputs DC 24 V ± 10 %; 100 m for fieldbus modules FBM: DC 12 V ± 25 %; 50 m mains fuse 0.63 (slow) DC 24 V ± 10 %; 100 m 16 I: KP10 oder V, programmable 16 BI: contact input 5 m; DC 24 V; max. 250 Ω; floating, of which 2 BI (K1 and K2) are used for pulse count up to 80 Hz 8 O: DC V; maximal 5 m; shortcircuit proof 8 BO: DC 24 V; transistor output for 80 m max. 8 universal inputs/outputs, freely programmable 4x20 character illuminated LCD LED bus; LED error 30 push buttons serial RS232 (modem, operator display, printer) PCMCI (memory card) diagnostic socket (code key, device diagnosis) bus for central control unit (Z bus): 99 DDC3000 control units; 1000 m, 3000 m with drives; 100 kbaud fieldbus (F bus): 63 fieldbus modules (FBM), fieldbus regulators (FBR); 2000 m; 20 kbaud; CN control cabinet bus (SBMBus): 16 control cabinet bus modules (SBM); 200 m; 40 kbaud; CN 68302; 32 Bits; 16 MHz 1 MByte RM 2 MByte FlashPROM Operating system PSOS 1.20 Programming language C realtime and multitask operation Mains failure 10 years, batterybuffered clock module data backup ddress switch with 2 turning knobs; address for central control unit (behind the front panel) Housing 19" plastic short enclosure, quadruple enclosure with two plugin bases Overvoltage category III Rated impulse voltage 800 V Level of contamination 2 Mode of operation Type 1 Degree of protection IP40 mbient temperature C mbient humidity in operation: % rel. hum., noncondensing out of operation: % rel. hum., noncondensing Page 3 / 6

4 Datasheet EN Issue Weight 2.2 kg Dimensions WxHxD mm 202 x 132 x 137 Front panel cutout WxH mm x 112 Installation Dimensions Page 4 / 6

5 Issue Datasheet EN Mounting WRNING Contact with live parts of electrical domestic installation can cause death due to electric shock. Mounting/removal may only be carried out when power is switched off Page 5 / 6

6 Datasheet EN Issue Connection 0V~ 24V~ 24V Hz FBM FBus KP10 B 1 B 2 B 3 B 4 B 5 B 6 B 7 B 8 B 9 B10 B11 B12 10V/50m 12V Y 1 Y 2 Y 3 Y 4 Y 5 Y 6 Y 7 Y 8 SBMBus KP10 B13 B14 B15 B16 24V= Y 1 V M 24V~ 10V SBM V 24V~ 24V 12V= 36 K 1 K 2 K 3 K 4 K 5 K 6 K 7 K 8 K 9 K10 K11 K12 K13 K14 K15 K16 TX RS232 P90 RX { K17 K18 K19 K20 K21 K22 K23 K24 K25 K26 K27 K28 K29 K30 K31 K32 ZBus DDC3010 DDC3035 DDC DDC Page 6 / 6