TLD1..TLD4 Duct Temperature Sensors

Transcription

1 Issue Datasheet EN Duct Temperature Sensors pplication The sensors are used as controlled variable sensors for duct installation in all outside-temperature controlled or fixed-value controlled ventilation and air-conditioning systems. They can also be used for closed-loop room temperature control in industrial spaces and workshops. The sensors are used in conjunction with all loop controllers and control systems that have a sensor connection for the KP10 measuring element. Content Page Important Information Regarding Product Safety...2 Item...3 Technical Data...3 ccessories (not included in delivery)...4 Dimensions...4 Connection...4 Mounting...5 Installation...6 Temperature/voltage table for the KP10 measuring element...7 Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения - változtatások jogát fenntartjuk - Kieback&Peter GmbH & Co. KG Tempelhofer Weg 50, Berlin/Germany Telefon: , Telefax: info@kieback-peter.com

2 Datasheet EN Issue Important Information Regarding Product Safety Safety Instructions This data sheet contains information on installing and commissioning the product "". Each person who carries out work on this product must have read and understood this data sheet. If you have any questions that are not resolved by this data sheet, you can obtain further information from the supplier or manufacturer. If the product is not used in accordance with this data sheet, the protection provided will be impaired. pplicable regulations must be observed when installing and using the device. Within the EU, these include regulations regarding occupational safety and accident prevention as well as those from the VDE (ssociation for Electrical, Electronic & Information Technologies). If the device is used in other countries, it is the responsibility of the system installer or operator to comply with local regulations. Mounting, installation and commissioning work on the devices may only be carried out by qualified technicians. Qualified technicians are persons who are familiar with the described product and who can assess given tasks and recognize possible dangers due to technical training, knowledge and experience as well as knowledge of the appropriate regulations. Legend WRNING Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided. CUTION Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided.! CUTION Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not avoided. NOTE Indicates additional information that can simplify the work with the product for you. Notes on Disposal For disposal, the product is considered waste from electrical and electronic equipment (electronic waste) and must not be disposed of as household waste. Special treatment for specific components may be legally binding or ecologically sensible. The local and currently applicable legislation must be observed. Page 2 / 8

3 Issue Datasheet EN Item TLD1 TLD2 TLD3 TLD4 Duct temperature sensor with KP10 measuring system Support tube for measuring element is 100 mm; duct installation depth is 80 mm Duct temperature sensor with KP10 measuring system Support tube for measuring element is 200 mm; duct installation depth is 180 mm Duct temperature sensor with KP10 measuring system Support tube for measuring element is 300 mm; duct installation depth is 280 mm Duct temperature sensor with KP10 measuring system Support tube for measuring element is 400 mm; duct installation depth is 380 mm Technical Data Measuring element KP10; V / 0 C; TC = 10 mv/k Measured quantity Duct temperature Measuring range -30 C C Measuring tolerance Typically ±0.2K Time constant T = 35 s at 2 m/s air velocity mbient temperature Sensor: -30 C C Housing: -30 C..+80 C mbient humidity < 95 % r.h.; non-condensing Connection Screw terminals, 2.5 mm² Housing Plastic, cable entry M16 x 1.5 Color Cover: RL7015 slate gray Base: RL7035 pale gray Degree of protection IP65 Weight TLD1: g TLD2: 110 g TLD3: g TLD4: g Dimensions (W x H x D) Housing (without support tube and mount-on components): 56.2 mm x 73.2 mm x 71.0 mm Page 3 / 8

4 Datasheet EN Issue ccessories (not included in delivery) B3 Socket flange for variable installation depth Z21 Wall bracket for sensor Dimensions 73,2 M16 x 1,5 71,0 Ø 12 L1= Ø 80 Ø 54 56,2 L 2 Ø 6 L1 = support tube length L2 = available space for installation above the installation location 120 Connection KP10 Page 4 / 8

5 Issue Datasheet EN Mounting! CUTION Mounting and removal may only be performed by qualified technicians. Comply with the specified mounting position. Ø 18, Screw the socket flange (with gasket) tightly onto the ventilation duct. Insert the duct humidity/temperature sensor into the socket flange until it locks into place. Be sure to leave enough space to connect the device. The sensor is uninstalled in reverse order. Page 5 / 8

6 Datasheet EN Issue Installation CUTION Electrical installation for connecting the device may only be carried out by qualified technicians. Ensure that this process complies with guidelines from the VDE (ssociation for Electrical, Electronic & Information Technologies) and local wiring regulations. ± 1,1 Nm 2,2 Nm 7 Ø 4, ± 0,1 Nm 0,4 Nm ± 0,1 Nm 0,4 Nm Page 6 / 8

7 Issue Datasheet EN Temperature/voltage table for the KP10 measuring element Temperature range from -30 C C for T ( C) V (V) T ( C) V (V) T ( C) V (V) T ( C) V (V) Page 7 / 8

8 Datasheet EN Issue Page 8 / 8