产品选型手册. Product selection guide. Series

Size: px
Start display at page:

Download "产品选型手册. Product selection guide. Series"

Transcription

1 产品选型手册 Product selection guide Series

2 pplications & Features New design, easy to move. ll-plastic housing, anti-oil,sealed. With axis selection switch and resolution switch. Emergency stop switch and reset switch optional. Used for CNC machine tools and printing machinery. Part Number RS 4 T R1 2 E Product Type Resolution Switch Enable Switch Supply Voltage Resolution N: Without resolution switch lank: With resolution switch R1: Single enable switch lank: Without enable switch 1:DC5V 2:DC8-26V 25ppr 100ppr xis No. Emergency Stop Spiral Cable Signal 4: 4 xis 6: 6 xis T: With emergency stop switch lank: Without emergency stop button Standard 3M E:Voltage Output F:Push-pull C:Open Collector L:Line Driver :Wide Voltage Line Driver :90 phase different singals output Electrical Specifications E(Voltage) C(Open Collector) L(Line driver) (Wide Voltage Line Driver) F(Push Pull) Supply Voltage DC(V) Current Requirement (m) Output Voltage(V) V H V L Vcc Vcc Vcc Rise Time (ns) Fall Time (ns) Frequency Response (khz)

3 1K E(Voltage ) 5V 8-26V 5V 8-26V K 51 F(Push-pull) C (Open Collector) L (Line Driver) 100 L:26C31 :ET7272 Q(Q= Z) Q(Q= Z) Output Waveform X1 X2 X3 X4 X1 X2 X3 X4 Wave Ratio : X1+X2=0.5T±0.1T X2+X3=0.5T±0.1T Phase Different :Xn 0.125T(n=1,2,3,4) M Z Waveform for C, E, F output \ / \ / M bsolute ngle Error: 0.2T Cycle Error : 0.05T T=360 / N(N=lines count per revolution) Waveform for L, output MPG Function xis No. Resolution Switch Start (Recover) Display (LED) Emergency Stop DC OFF X Y Z X1 X10 X100 COM OVLED NC1 NC2 NC1 NC2 24V

4 Environmental Specifications Max. Speed Operating Temp. Store Temp. Size Weight 600r/min -10~+60-20~ *72*60mm pprox.0.59kg Connection 17 Pins Cable Wire,4 xis Cable Color L DU LU RD/K U/K RD K YL WH CR GY CR/K GN OG N 4 COM +L -L VCC OV X1 X10 X100 X Y Z E 4 COM +L -L VCC OV X1 X10 X100 X Y Z / / / / 21 Pins Cable Wire,4 xis with Emergency Stop utton Cable Color GY GY/K WH/K LU GN N N/K OG RD/K U/K RD K YL WH YL/K OG/K GN/K PL/K L X1 X10 X100 COM X Z 4 Y +L -L VCC OV K1 K2 K3 K4 E X1 X10 X100 COM X Z 4 Y +L -L VCC OV K1 K2 K3 K4 / / / / 17 Pins Cable Wire,6 xis,voltage Ouput Cable Color E DU LU RD/K U/K RD K YL WH CR GN/K CR/K GN OG N 4 COM +L -L VCC OV X1 X10 X100 X Y Z Pins Cable Wire,6 xis, Line Driver Output Cable Color GY GY/K WH/K LU GN N N/K OG RD/K U/K RD K YL WH YL/K OG/K L X1 X10 X100 COM X Z 4 Y +L -L VCC OV 5 6 / / 21 Pins Cable Wire,6 xis with Emergency Stop utton, Voltage Output Cable Color GY GY/K WH/K LU GN N N/K OG RD/K U/K RD K YL WH YL/K OG/K GN/K PL/K E X1 X10 X100 COM X Z 4 Y +L -L VCC OV K1 K2 K3 K Pins Cable Wire,6 xis with Emergency Stop utton, Line Driver Output Cable Color CR CR/WH WH/K LU WH/RD WH/U GN OG N L X1 X10 X100 COM +L -L X Y Z DU 4 GY WH/GY 5 6 YL WH K RD WH/YL WH/OG WH/GN WH/PLWH PK PL 0V Vcc K1 K2 K3 K4 / /

5 2-φ6 Dimension 使能按钮 (En ab l e Sw it ch ) 附件 (ccessory) φ 急停按钮 (Emer gency Stop S w it ch ) 倍率波段开关 (S wi tc h F or R es ol ut io n ) 30 0 L 轴选波段开关 (S wi tc h F or xe s) 标配 (S ta nd ar d )3 M China Rongde Optics Co., Ltd

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical

More information

Rotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track

Rotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,

More information

RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e

RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via

More information

Encoder WDG 30A.

Encoder WDG 30A. Encoder WDG 30A www.wachendorffautomation.com/wdg30a Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

Documentation. URCaps induction. (Circuit diagrams) Project: Robot and induction soldering

Documentation. URCaps induction. (Circuit diagrams) Project: Robot and induction soldering ocumentation URaps induction (ircuit diagrams) Robot and induction soldering Project: lectrical ngineering This drawing is protected by copyright ny unauthorized copying or rev ate ate 005 IN 66 TN GmbH

More information

STE58S P5VL6-K1215

STE58S P5VL6-K1215 STE Encoders Selection chart STE58S10-5400P5VL6-K1215 SHAFT LENGTH X CABLE LENGTH NAME DIAMETER ENCODER NO. OF OUTPUT WIRES SHAFT TYPE S: solid K: hollow B: half-hollow OUTPUT TYPE : C : open collector

More information

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor

More information

SPECIFICATIONS FOR LCD MODULE

SPECIFICATIONS FOR LCD MODULE 145 Royal Crest Court Unit 42 Markham, ON, Canada L3R 9Z4 Tel: 905-477-1166 Fax: 905-477-1782 http://www.orientdisplay.com SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. Orient Display (N.A.)

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

Documentation. URCaps hot iron. Segelfliegerdamm (Circuit diagrams) Project: Robot and hot iron

Documentation. URCaps hot iron. Segelfliegerdamm (Circuit diagrams) Project: Robot and hot iron ocumentation Segelfliegerdamm - erlin URaps hot iron (ircuit diagrams) Robot and hot iron Project: 0 7 lectrical ngineering 7 This drawing is protected by copyright ny unauthorized copying or 00 I T GmbH

More information

Rotary Measuring Technology

Rotary Measuring Technology --20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones

More information

SPECIFICATIONS FOR LCD MODULE

SPECIFICATIONS FOR LCD MODULE 145 Royal Crest Court Unit 42 Markham, ON, Canada L3R 9Z4 Tel: 905-477-1166 Fax: 905-477-1782 http://www.orientdisplay.com SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. ACMMI PART NO. AMG16032A

More information

Accessory Kit for all Designs of Hand-held Pendant Station

Accessory Kit for all Designs of Hand-held Pendant Station Overview of accessories for hand-held pendant station kits Accessories for kit Suitable for all designs Hand-held pendant stations HBA/HBM Hand-held pendant stations HBL EMERGENCY- STOP device Pushbutton

More information

Linear measuring technology

Linear measuring technology Draw wire encoder C00 Thanks to its roust design and its high IP67 protection level, the draw wire encoder C00 relialy provides accurate length measurement Its simple and optimal integration in the application

More information

Rotary Measuring Technology Absolute singleturn encoder shaft version

Rotary Measuring Technology Absolute singleturn encoder shaft version Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various

More information

Revision No. Date Description Item Page

Revision No. Date Description Item Page Midas Components Limited Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU England Telephone +44 (0)1493 602602 Fax +44 (0)1493 665111 Email sales@midasdisplays.com Website www.midasdisplays.com

More information

The SMART Non-contact Safety Sensor SRF With an innovative diagnostic system

The SMART Non-contact Safety Sensor SRF With an innovative diagnostic system The SMART With an innovative diagnostic system Actual size shown Very compact: small in size, flexible in use Very Smart: suitable for Industry 4.0 with its intelligent diagnostic system Cost Saving: four-wire

More information

Connecting cables for valves, Sub-D socket Type codes

Connecting cables for valves, Sub-D socket Type codes Connecting cables for valves, Sub-D socket Type codes K MP3 K Connecting cable on the left, field device side MP3 Sub-D socket Number of pins/wires, left 9P 25P 9-pin 25-pin Number of pins/wires, right

More information

Dimensions. Model Number. Electrical connection. Features. Pinout. Product information. Indicators/operating means OMT300-R201-IEP-IO-V1

Dimensions. Model Number. Electrical connection. Features. Pinout. Product information. Indicators/operating means OMT300-R201-IEP-IO-V1 Dimensions. 9.9 6 Model Number 6.7 Ref. 6. 5. 5.8 7 7.7.6 ø. 9 50 78.5 Receiver Emitter M x..7 sensor with -pin, M x connector Electrical connection Features Medium design with versatile mounting options

More information

ABB Drives. User s Manual Pulse Encoder Interface Module MTAC-01

ABB Drives. User s Manual Pulse Encoder Interface Module MTAC-01 ABB Drives User s Manual Pulse Encoder Interface Module MTAC-01 Pulse Encoder Interface Module MTAC-01 User s Manual 3AFE68591091 REV B EN EFFECTIVE: 04.04.2006 2006 ABB Oy. All Rights Reserved. 5 Safety

More information

TURCK Industrial Connectivity Products

TURCK Industrial Connectivity Products TURCK Industrial Connectivity Products multibox eurofast Junction Boxes, 4-Ports Rugged Plastic Housing with Flush Connectors Available with or without LEDs Quick Disconnect or minifast Connector 4-, 2-Signals

More information

USER S GUIDE ATM4004A

USER S GUIDE ATM4004A USER S GUIDE ATM4004A Liquid Crystal Display Module CONTENTS 1.0 Mechanical Diagram. 3 2.0 Absolute Maximum Ratings 4 3.0 Description of Terminals. 4 4.0 Optical Characteristics 5 5.0 Electrical Characteristics

More information

16COM / 80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

16COM / 80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD INTRODUCTION KS0070B is a dot matrix LCD driver & controller LSI which is fabricated by low power CMOS technology. It is capable of displaying 1 or 2 lines with the 5 7 format or 1 line with the 5 10 dots

More information

HY-TB5 CNC Series Manual five axis

HY-TB5 CNC Series Manual five axis HY-TB5 CNC Series Manual ------ five axis Thank you for choosing our products better and faster for you to use NC products, please read this manual, make sure the pump is started before the water-cooled

More information

Screw. Nut Guide. Features

Screw. Nut Guide. Features Actuator Controls Rotary Limit Switches SKA Series Rotary Limit Switch Screw Traveling Nuts Input Shaft Nut Guide Gear Precision Available in two control voltage ratings: 250 or 480, and in three gear

More information

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM1602B (WHITE EDGELIGHT) SERIES DATE: APRIL 28, 2003 1.0 MECHANICAL SPECS 1. Overall Module Size 84.0mm(W)

More information

Pi-Tek OLED Module PG12864KW Revision: 1.0 May Pi Tek. OLED Module SPECIFICATIONS MODEL NO. : PG12864KW PRODUCT TYPE: STANDARD

Pi-Tek OLED Module PG12864KW Revision: 1.0 May Pi Tek. OLED Module SPECIFICATIONS MODEL NO. : PG12864KW PRODUCT TYPE: STANDARD Pi Tek OLED Module SPECIFICATIONS MODEL NO. : PG12864KW PRODUCT TYPE: STANDARD This specification may be changed without any notices in order improve performance or quality etc. 1 Content History of versions

More information

User's Manual. For ST-6560V3. Version All Rights Reserved

User's Manual. For ST-6560V3. Version All Rights Reserved User's Manual For ST-6560V3 Version 2.0 2016.08.25 All Rights Reserved 1. Key Features Toshiba TB6560AHQ chip - High power, maximum current 3.5A Resolution 1, 1/2, 1/8, 1/16 micro stepping output Working

More information

User s Manual Pulse Encoder Interface Module OTAC-01

User s Manual Pulse Encoder Interface Module OTAC-01 Drive IT Low Voltage AC Drives User s Manual Pulse Encoder Interface Module OTAC-01 2 Safety WARNING! All electrical installation and maintenance work on the drive should be carried out by qualified electricians

More information

ParCon and PosCon line sensors

ParCon and PosCon line sensors and line sensors and line sensors Introduction 364 Overview product family measuring mode: edges, width measuring mode: edges, width measuring mode: sum of all dark areas, edges switchable measuring field

More information

ACORN User Guide For Revision (Aka Acorn_rev3) Updated 1/23/17

ACORN User Guide For Revision (Aka Acorn_rev3) Updated 1/23/17 ACORN User Guide For Revision 171025 (Aka Acorn_rev3) Updated 1/23/17 Overview ACORN is technically a breakout board for the BeagleBone Green or BeagleBone Black embedded computer. The remainder of this

More information

Optical distance sensors. Dimensioned drawing

Optical distance sensors. Dimensioned drawing Optical distance sensors Dimensioned drawing We reserve the right to make changes DS_ODS10L1_25M8L_en_50129321.fm en 04-2016/08 50129321 100 25000mm Measurement range up to 25000mm on HighGain foil Analog

More information

LCM NHD-0440AZ-FSW -FBW. User s Guide. (Liquid Crystal Display Character Module) RoHS Compliant FEATURES

LCM NHD-0440AZ-FSW -FBW. User s Guide. (Liquid Crystal Display Character Module) RoHS Compliant FEATURES User s Guide NHD-0440AZ-FSW -FBW LCM (Liquid Crystal Display Character Module) RoHS Compliant FEATURES Display format: 4 Lines x 40 Characters (A) Display Series/Model (Z) Factory line (F) Polarizer =

More information

Parallel Display Specifications Revision 1.1

Parallel Display Specifications Revision 1.1 MOP-GL240128D Parallel Display Specifications Revision 1.1 Revision History Revision Date Description Author 1.1 November 12, 2015 Correction to tables 1 and 2 regarding data bit pins Divino 1.0 March

More information

HB5M. Hollow Bore Optical Encoder Page 1 of 5. Description. Mechanical Drawing. Features

HB5M. Hollow Bore Optical Encoder Page 1 of 5. Description. Mechanical Drawing. Features Description HB5M Page 1 of 5 The HB5M is a hollow bore (hollow shaft / thru-bore) optical encoder with a machined aluminum enclosure and an anodized protective finish. The HB5M optical incremental encoder

More information

HT1621. RAM Mapping 32 4 LCD Controller for I/O µc. Features. General Description. Selection Table

HT1621. RAM Mapping 32 4 LCD Controller for I/O µc. Features. General Description. Selection Table RAM Mapping 32 4 LCD Controller for I/O µc Features Operating voltage : 2.4V~5.2V Built-in 256kHz RC oscillator External 32.768kHz crystal or 256kHz frequency source input Selection of 1/2 or 1/3 bias,

More information

Item Symbol Standard Unit Power voltage VDD-VSS Input voltage VIN VSS - VDD

Item Symbol Standard Unit Power voltage VDD-VSS Input voltage VIN VSS - VDD SPECIFICATIONS OF LCD MODULE Features 1. 5x8 dots with cursor 2. Built-in controller (S6A0069 or equivalent) 3. Easy interface with 4-bit or 8-bit MPU 4. +5V power supply (also available for =3.0V) 5.

More information

CM Series. Most Diverse and Flexible Line of Coded Magnetic Safety Interlock Switches and Controllers. Description. Safety Interlock Switches

CM Series. Most Diverse and Flexible Line of Coded Magnetic Safety Interlock Switches and Controllers. Description. Safety Interlock Switches R Safety Interlock Switches CM Series CM For full product information, visit www.sti.com. Use the SpeedSPEC Code for quick access to the specific web page. Most Diverse and Flexible Line of Coded Magnetic

More information

Parallel Display Specifications Revision 1.0

Parallel Display Specifications Revision 1.0 MOP-AL162A Parallel Display Specifications Revision 1.0 Revision History Revision Description Author 1.0 Initial Release Clark 0.2 Updates as per issue #333 Clark 0.1 Initial Draft Clark 1 Contents Revision

More information

Optical Kit Encoder Page 1 of 7. Description. Features

Optical Kit Encoder Page 1 of 7. Description. Features Description Page 1 of 7 The E2 optical encoder is designed as a direct replacement for the Avago HEDS / HEDM 5500-5600 series. The E2 is a rotary encoder with a rugged glass-filled polymer enclosure, which

More information

Preliminary Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Preliminary V1.0

Preliminary Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Preliminary V1.0 Preliminary Datasheet MX4660 4-Axis Stepper Drive with Breakout Board & I/O s Preliminary V1.0 Features Power up to 4 stepper motors of NEMA 17, 23, 24, or 34 Sophisticated stepper motor control based

More information

LCD MODULE DEP Y

LCD MODULE DEP Y Display Elektronik GmbH LCD MODULE DEP 16216Y Product Specification Ver.: 5 15.11.2011 Contents 1. Module Basic Specification... 2. Mechanical Drawing... 3. Pin Definition... 4. Absolute Maximum Ratings...

More information

16COM/80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

16COM/80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD 6COM/80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD INTRODUCTION The is a dot matrix LCD driver & controller LSI which is fabricated by low power CMOS technology It is capable of displaying or 2 lines with

More information

PCL channel Isolated Digital I/O Card

PCL channel Isolated Digital I/O Card PCL-730 32-channel Isolated Digital I/O Card Copyright This documentation is copyrighted 1996 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements

More information

Electro-Mechanical Training System with Stepper Motor

Electro-Mechanical Training System with Stepper Motor Electro-Mechanical Training System with Stepper Motor LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 06/2018 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2

More information

OLED Push Switches. 96RGBx64 (0.95 ) OLED Switches

OLED Push Switches. 96RGBx64 (0.95 ) OLED Switches DISTINCTIVE CHARACTERISTICS Organic LED Technology Wide View Angle of 160 Exceptional Contrast and Brightness: 50times greater Brightness than previous LCD Products, four times more enhanced Resolution

More information

Optical Switch

Optical Switch 1 4 1 8 1 16 Optical Switch Features: Wide Wavelength Range Low Back Reflection High Reliability High dependability Simple control Unique Patented Technology No glue in the route Applications: Switching

More information

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version Datasheet MX4660 4-Axis Stepper Drive with Breakout Board & I/O s Version 1.0 http://www.leadshine.com http://www.leadshineusa.com 2014 Leadshine Technology Co., Ltd. Notice This document is not for use

More information

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM 4002E SERIES DATE: October 8, 2002 1.0 MECHANICAL SPECS ACM4002E SERIES LCD MODULE 1. Overall Module

More information

Parallel Display Specifications Revision 1.0

Parallel Display Specifications Revision 1.0 MOP-GL12864F Parallel Display Specifications Revision 1.0 Revision History Revision Date Description Author 1.0 March 25, 2012 Initial Release Clark 0.2 Updates as per issue #333 Clark 0.1 Initial Draft

More information

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version1.0

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version1.0 Datasheet MX3660 3-Axis Stepper Drive with Breakout Board & I/O s Version1.0 1. Features Power up to 3 stepper motors of NEMA 17, 23, 24, or 34 Sophisticated stepper motor control based on latest DSP technology

More information

Crystalfontz America, Inc.

Crystalfontz America, Inc. Crystalfontz America, Inc. SPECIFICATION CUSTOMER : MODULE NO.: CFAG12864K-YYH-TN SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: Crystalfontz America, Inc. 12412 East Saltese Avenue Spokane Valley,

More information

16COM / 40SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

16COM / 40SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD INTRODUCTION KS0066U is a dot matrix LCD driver & controller LSI whichis fabricated by low power CMOS technology It can display 1or 2 lines with the 5 8 dots format or 1 line with the 5 11 dots format

More information

PC200 Control Box USER MANUAL 24V DC GEAR MOTOR FOR RESIDENTIAL

PC200 Control Box USER MANUAL 24V DC GEAR MOTOR FOR RESIDENTIAL PC200 Control ox 24V DC GER MOTOR FOR RESIDENTIL USER MNUL Index 1. PC200 Control ox 2. Setting 2.1 SW1 Dip Switch Setting 2.1.1 Slowdown djustment (Dip 1.S/F Set) 2.1.2 Over-current djustment (Dip 2.Over2

More information

User's Manual. ACPL-796J Opto-Isolated A/D Converter Evaluation Kit. Description. Preparation

User's Manual. ACPL-796J Opto-Isolated A/D Converter Evaluation Kit. Description. Preparation ACPL-J Opto-Isolated A/D Converter Evaluation Kit User's Manual Description The ACPL-J Isolated Modulator (optocoupler) uses sigma-delta modulation to convert an analog input signal into a high-speed single-bit

More information

LCM NHD-0440CI-YTBL. User s Guide. (Liquid Crystal Display Module) RoHS Compliant. For product support, contact NHD CI- Y- T- B- L-

LCM NHD-0440CI-YTBL. User s Guide. (Liquid Crystal Display Module) RoHS Compliant. For product support, contact NHD CI- Y- T- B- L- User s Guide NHD-0440CI-YTBL LCM (Liquid Crystal Display Module) RoHS Compliant NHD- 0440- CI- Y- T- B- L- Newhaven Display 4 Lines x 40 Characters C: Display Series/Model I: Factory line STN Yellow/Green

More information

CROTIPS TECHNOLOGY USA

CROTIPS TECHNOLOGY USA B 2012/03/05 1 / 20 MICROTIPS TECHNOLOGY USA TEL: 407-273-0204, FAX: 407-273-0771 B 2012/03/05 2 / 20 Contents 1. General Description... 3 2. Physical Features... 3 3. Mechanical Specification... 3 4.

More information

Thank you for choosing our products better and faster operational

Thank you for choosing our products better and faster operational Aerospace TB3-axis drive board H-TB3DV-M Instructions Thank you for choosing our products better and faster operational numerical control for you, please read this manual Products Features 1 The maximum

More information

Active Distributors ASi Safety, IP67

Active Distributors ASi Safety, IP67 x connectors for profile cable Periphery connection via M8 cable sockets M cable sockets (Figure similar) Figure Type Inputs, SIL 3, Cat. 4 9 mm 9 mm 9 mm 9 mm channels channels channels channels Inputs

More information

Optical Kit Encoder Page 1 of 14. Description. Features

Optical Kit Encoder Page 1 of 14. Description. Features Page 1 of 14 Description The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin finger-latching connector. This optical incremental encoder is designed to easily

More information

Product Specification

Product Specification Product Specification Bi-Color OLED Display Part Number: FDS128x64(26.7x31.26)TFP PREPARED BY CHECKED BY APPROVED BY Focus Display Solutions, Inc. Notes: 1. Please contact Focus Display Solutions, Inc.

More information

Energy Management Modular Energy meters Type EM2-96

Energy Management Modular Energy meters Type EM2-96 Energy Management Modular Energy meters Type EM2-96 Product Description µp-based modular energy meter with a built-in configuration key-pad. The energies are both partial and total counted. The housing

More information

NOVOHALL Rotary Sensor non-contacting. Series RSB-3600 Series RMB-3600

NOVOHALL Rotary Sensor non-contacting. Series RSB-3600 Series RMB-3600 NOVOHALL Rotary Sensor non-contacting Series RSB-3600 Series RMB-3600 Special features Non-contacting, hall technology Measuring range up to 5760 Single- and multiturn True-power-on system: counts turns

More information

Chapter. Specifications. In this Chapter...

Chapter. Specifications. In this Chapter... Specifications hapter In this hapter... vailable Models... - E-SML-RN and E-SML-R Specifications... - E-SML and E-TL Specifications... - E-TL, E-TL and E-TL Specifications... - E-SML-RN, E-SML-R, E-SML

More information

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM 1602B SERIES DATE: August 9, 1999 1.0 MECHANICAL SPECS ACM1602B SERIES LCD MODULE 1. Overall Module Size

More information

Newhaven Display International, Inc Galvin Ct. Elgin IL, Ph: Fax:

Newhaven Display International, Inc Galvin Ct. Elgin IL, Ph: Fax: NHD-0216MW-AB3 Character OLED Display NHD- Newhaven Display 0216-2 Lines x 16 Characters MW- Character OLED Display A- Model B- Blue 3-2.4V~5.5V Supply Voltage Newhaven Display International, Inc. 2661

More information

中显液晶 技术资料 中显控制器使用说明书 2009年3月15日 北京市海淀区中关村大街32号和盛大厦811室 电话 86 010 52926620 传真 86 010 52926621 企业网站.zxlcd.com

中显液晶 技术资料 中显控制器使用说明书 2009年3月15日 北京市海淀区中关村大街32号和盛大厦811室 电话 86 010 52926620 传真 86 010 52926621   企业网站.zxlcd.com http://wwwzxlcdcom 4 SEG / 6 COM DRIVER & CONTROLLER FOR DOT MATRIX LCD June 2 Ver Contents in this document are subject to change without notice No part of this document may be reproduced or transmitted

More information

SCB-C08 USB to RS232/422/485 Converter

SCB-C08 USB to RS232/422/485 Converter SCB-C08 USB to RS232/422/485 Converter USB Interface RS-232 signal RS-422 signal: RS-485 signal: Cable Type Transmission distance Signal LED Direct power from USB port Power consumption: Compliant with

More information

DISPLAYTRONIC A DIVISION OF ZE XIAMEN SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

DISPLAYTRONIC A DIVISION OF ZE XIAMEN SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY DISPLAYTRONIC A DIVISION OF ZE XIAMEN SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM 1602K SERIES DATE: August 9, 1999 1.0 MECHANICAL SPECS 1. Overall Module Size 80.0mm(W) x 36.0mm(H) x max

More information

Crystalfontz America, Inc.

Crystalfontz America, Inc. Crystalfontz America, Inc. CUSTOMER : SPECIFICATION MODULE NO.: CFAG19264A-STI-TN SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: Crystalfontz America, Inc. 12412 East Saltese Avenue Spokane Valley,

More information

RDC633XM mixed cutting system. Supplementary manual

RDC633XM mixed cutting system. Supplementary manual RDC6XM mixed cutting system Supplementary manual Product model: RDC6M ;RDC6M ;RDC6M (This manual is just for DSP Ver:6.0.) System Introduction RDC6xM laser metal cutting control system is a high cost performance

More information

Connection and Operation (Built-In Controller Package)

Connection and Operation (Built-In Controller Package) Stepping Motors Connection and Operation (Built-In Controller Package) Names and Functions of Parts Motor Connector 1 1 Signal Monitor Display LED Indicators Indication Color Function When Activated OPERATION

More information

2-wire Serial EEPROM AT24C01A AT24C02 AT24C04 AT24C08 AT24C16

2-wire Serial EEPROM AT24C01A AT24C02 AT24C04 AT24C08 AT24C16 Features Low-voltage and Standard-voltage Operation 5.0 (V CC = 4.5V to 5.5V) 2.7 (V CC = 2.7V to 5.5V) 2.5 (V CC = 2.5V to 5.5V) 1.8 (V CC = 1.8V to 5.5V) Internally Organized 128 x 8 (1K), 256 x 8 (2K),

More information

REV: PAGE: REVISION DESCRIPTION APPR: DATE: A ALL Released to production GRW 6/17/94

REV: PAGE: REVISION DESCRIPTION APPR: DATE: A ALL Released to production GRW 6/17/94 PAGE: REVISION DESCRIPTION APPR: DATE: A ALL Released to production GRW 6/17/94 B 5 Maximum component height was 10.5mm; Removed through hole crystal note and dimension; GRW 3/23/95 Released to production

More information

Type Version Ordering Code Package PEB 2025-N V 1.5 Q67100-H6300 P-LCC-28-R (SMD) PEB 2025-P V 1.5 Q67100-H6241 P-DIP-22

Type Version Ordering Code Package PEB 2025-N V 1.5 Q67100-H6300 P-LCC-28-R (SMD) PEB 2025-P V 1.5 Q67100-H6241 P-DIP-22 ISDN Exchange Power Controller (IEPC) PEB 2025 CMOS IC Features Supplies power to up to four transmission lines CCITT recommendations compatible for power feed at the S interface Each line is individually

More information

Requirement for Compliance with LVD directive

Requirement for Compliance with LVD directive Requirement for Compliance with LVD directive The following products have shown compliance through direct testing (of the identified standards below) and design analysis (through the creation of a technical

More information

Measurement range, typical

Measurement range, typical Light section sensor for object measurement Dimensioned drawing en 05-2011/05 50111079-02 200 800mm +Z +X -X 18-30 V DC We reserve the right to make changes DS_LPS_36en.fm Light section sensor for object

More information

PARALLEL ABSOLUTE MULTITURN ENCODER - PUSH PULL - PHM5 RANGE. Changes possible without further notice - Version

PARALLEL ABSOLUTE MULTITURN ENCODER - PUSH PULL - PHM5 RANGE. Changes possible without further notice - Version PARALLEL ABSOLUTE MULTITURN ENCODER - PUSH PULL - RANGE Solid shaft Ø 6 and Ø 10 mm, Robustness and excellent resistance to shocks / vibrations, High protection level IP65, IP67 option with a sealing flange,

More information

UNISONIC TECHNOLOGIES CO., LTD 6621 Preliminary LINEAR INTEGRATED CIRCUIT

UNISONIC TECHNOLOGIES CO., LTD 6621 Preliminary LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 6621 Preliminary LINEAR INTEGRATED CIRCUIT RAM MAPPLING 32 4 LCD CONTROLLER FOR I/O μc DESCRIPTION The UTC 6621 is a 128 patterns (32 4), memory mapping, and multi-function

More information

Rotary Measurement Technology Absolute Encoders, Singleturn

Rotary Measurement Technology Absolute Encoders, Singleturn -20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.

More information

N1014A SFF-8431 (SFP+)

N1014A SFF-8431 (SFP+) DATA SHEET N1014A SFF-8431 (SFP+) Compliance and Debug Application for 86100D DCA-X and N109X DCA-M Oscilloscopes Be Confident With Compliant Measurements Easy-to-use oscilloscope application that lets

More information

Encoder WDGA 36A SSI.

Encoder WDGA 36A SSI. Encoder WDGA 36A SSI www.wachendorff-automation.com/wdga36assi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer

More information

Encoder WDG 63Q.

Encoder WDG 63Q. Encoder WDG Q www.wachendorffautomation.com/wdgq Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

NHD C12864MZ NSW BTW. COG (Chip On Glass) Liquid Crystal Display Module

NHD C12864MZ NSW BTW. COG (Chip On Glass) Liquid Crystal Display Module NHD C12864MZ NSW BTW COG (Chip On Glass) Liquid Crystal Display Module NHD Newhaven Display C12864 128 x 64 pixels MZ Model N Transmissive SW Side White LED backlight B STN Blue ( ) T 12:00 view W Wide

More information

3-Axis Stepper Drive Datasheet MX3660

3-Axis Stepper Drive Datasheet MX3660 3-Axis Stepper Drive Datasheet MX3660 3-Axis Stepper Drive + Breakout Board, 20-60VDC, 6A Peak Version 0.0.2 http://www.leadshine.com Features Three individual stepper drive boards Suitable for NEMA17

More information

SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS

SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according

More information

Rubber seat 0.5 MAX MAX

Rubber seat 0.5 MAX MAX GP2Z0001AU1 Optical Pointing Device Features 1. Easy operation thanks to adoption of optical system and slide system 2. High reliability due to elimination of the contact wear with the optical system 3.

More information

Centroid ACORN CNC controller Specification and Use Guide Updated 8/3/17. Overview

Centroid ACORN CNC controller Specification and Use Guide Updated 8/3/17. Overview Centroid ACORN CNC controller Specification and Use Guide Updated 8//7 Overview ACORN is technically a CNC control breakout board for the BeagleBone Green or BeagleBone Black embedded computer the Beagle

More information

Small Machine Operator s Panel Connection Manual

Small Machine Operator s Panel Connection Manual Small Machine Operator s Panel Connection Manual -Item- 1. Overview 2. Overall connection diagram 3. Each connections 3.1 Pin assignment 3.2 Power connection 3.3 Emergency stop switch 3.4 I/O Link connection

More information

Your Global Automation Partner. Connectivity Process Automation ATEX/IECEx Approved Minifast Connectors B2050-ATEX

Your Global Automation Partner. Connectivity Process Automation ATEX/IECEx Approved Minifast Connectors B2050-ATEX Your Global utomation Partner onnectivity Process utomation TX/Ix pproved Minifast onnectors 2050-TX TX pproved Minifast H (Heavy uty) ordsets Key Keys are to assist in INTIITION ONLY. onsult factory for

More information

Instruction It can display battery voltage, discharge current, time, battery

Instruction It can display battery voltage, discharge current, time, battery Feature: Instruction NC, constant current battery discharge instrument It can display battery voltage, discharge current, time, battery capacity, power, total power, resistance Auto remember the last set

More information

LCM SPECIFICATIONS. Vatronix Holdings Limited. Approved By Checked By Prepared By. Approved By Customer: Date: Customer : DRAWING NO.

LCM SPECIFICATIONS. Vatronix Holdings Limited. Approved By Checked By Prepared By. Approved By Customer: Date: Customer : DRAWING NO. LCM SPECIFICATIONS Customer : MASS PRODUCTION CODE : TG12864B-04WA0_A00 DRAWING NO. : Approved By Customer: Date: Approved By Checked By Prepared By Vatronix Holdings Limited ADD 5F,No.10 BLG,WenGuang

More information

Safety Switches CES-AR/CET-AR

Safety Switches CES-AR/CET-AR Non-contact safety switches CET-AR-... with guard locking and guard lock monitoring Safety switch with guard locking and integrated evaluation electronics Locking force up to 00 N Up to 0 switches in series

More information

Encoder WDG 115T - Discontinued product

Encoder WDG 115T - Discontinued product Encoder WDG T Discontinued product www.wachendorffautomation.com/wdgt Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and

More information

2-wire Serial EEPROM AT24C512

2-wire Serial EEPROM AT24C512 Features Low-voltage and Standard-voltage Operation 5.0 (V CC = 4.5V to 5.5V). (V CC =.V to 5.5V). (V CC =.V to.v) Internally Organized 5,5 x -wire Serial Interface Schmitt Triggers, Filtered Inputs for

More information

Picture cell driver for STN (LCD driver)

Picture cell driver for STN (LCD driver) Picture cell driver for STN (LCD driver) BU976BK / BU976BKV The BU976BK and BU976BKV are man-machine interface ICs designed for applications such as multi-media portable terminals. Specifically, these

More information

Installation guide for PR302 v2.0 Rev. E

Installation guide for PR302 v2.0 Rev. E Installation guide for PR302 v2.0 Rev. E 2016 ROGER sp. z o.o. sp.k. All rights reserved. This document is subject to the Terms of Use in their current version published at the www.roger.pl website of

More information

Identification System CIS3A-Mini

Identification System CIS3A-Mini Inductive Identification System CISA-Mini One of the smallest plug-in read heads Interface adapter for fitting on the DIN rail in the control cabinet Miniature data carrier, diameter 10 x 4 mm Read distance

More information

NHD MF 22 Controller Board

NHD MF 22 Controller Board NHD 4.3 480272MF 22 Controller Board TFT Controller Evaluation Board NHD Newhaven Display 4.3 4.3 Diagonal 480272 480xRGBx272 pixels MF Model 22 22 POS FFC interface (8 bit data) SSD1963 Controller Newhaven

More information

64x48 Monochrome (0.66 ) OLED Switches. - Dimension: 24.5x24.5x22.3 mm (LxWxH) - Display Mode: Passive Matrix

64x48 Monochrome (0.66 ) OLED Switches. - Dimension: 24.5x24.5x22.3 mm (LxWxH) - Display Mode: Passive Matrix DISTINCTIVE CHARACTERISTICS - Organic LED Technology - Wide View Angle of 160 - Exceptional Contrast and Brightness: 50times greater Brightness than previous LCD Products, four times more enhanced Resolution

More information