Encoder WDG 115T - Discontinued product
|
|
- Trevor Mills
- 5 years ago
- Views:
Transcription
1 Encoder WDG T Discontinued product Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum permissible loads hour express production Made in Germany Worldwide distributor network WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
2 Encoder WDG T Discontinued product Digital Tachogenerator with robust Standardflange Up to 000 PPR by use of high grad electronics High noise immunity against frequency inverters Protection to IP7, shaft sealed to IP 0 mm shaft Full connection protection with 0 VDC up to 0 VDC With light reserve Optional: 0 C up to +0 C Protection to IP7 all around Resolution Max. pulses per revolution PPR Mechanical Data Housing Flange Flange material Housing cap Housing Shaft(s) Shaft material Starting torque up to 000 PPR tacho flange aluminium aluminium, powder coated Ø mm stainless steel approx. cm at ambient temperature Output circuit TTL TTL, RS compatible, inv. HTL HTL, inv. Vpp sin/cos Pulse frequency TTL 000 ppr: max. 00 khz HTL 000 ppr: max. 00 khz TTL more than 00 ppr: max. MHz HTL more than 00 ppr: max. 00 khz Vpp sin/cos: max. 00 khz Channels and inverted signals Load max. 0 m / Vpp sin/cos: min. 0 Ohm protection circuit type F, G, H, I, P, R only Shaft Ø 0 mm Shaft length Max. Permissible shaft loading radial Max. Permissible shaft loading axial earings earings type L: mm 00 0 precision ball bearings ominale service life x 0'9 revs. at 00 % rated shaft load x 0'0 revs. at 0 % rated shaft load x 0' revs. at 0 % rated shaft load Max. operating speed 000 rpm Machinery Directive: basic data safety integrity level MTTF d Mission time (TM) 00 a a ominale service life (L0h) x 0' revs. at 0 % rated shaft load and 000 rpm Diagnostic coverage (DC) 0 % ccuracy Phase offset 90 ± max. 7. % of the pulse length pulse/pauseratio 000 ppr: 0 % ± max. 7 % >000 ppr: 0 % ± max. 0 % General Data Weight Connections approx. 0 g cable or connector outlet Protection rating (E 09) IP7, shaft sealed to IP (IP all around with S7) Operating temperature 0 C up to +0 C Vpp: 0 C up to +70 C Storage temperature 0 C up to +0 C More Information General technical data Options Electrical Data Power supply/current consumption Power supply/current consumption Power supply/current consumption,7 VDC up to, VDC: max. 00 m VDC up to 0 VDC: max. 70 m 0 VDC up to 0 VDC: max. 00 m WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
3 Cable connection K, K, L, L with m cable K axial, shield not connected poss. L axial, shield connected to encoder housing K radial, shield not connected L radial, shield connected to encoder housing ssignments inv. inv. K, K, L, L G0, G WH G YE GY PK flex K, L, K, L F0, H0, F, H, H0 WH G YE GY flex K, L, K, L I0, I, WH G YE GY PK RD K, (U at C) VT flex K, L, K, L P0, R0, P, R,,, R0 WH G YE GY RD K, (U at C) VT flex K, L, K, L SI WH G GY YE PK flex WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
4 Connector (Mx0.7) SI, SH,,,, pin poss. SI axial, pin, Connector connected to encoder housing SH radial, pin, Connector connected to encoder housing SI axial, pin, Connector connected to encoder housing SH radial, pin, Connector connected to encoder housing SI axial, pin, Connector connected to encoder housing SH radial, pin, Connector connected to encoder housing SI axial, pin, Connector connected to encoder housing SH radial, pin, Connector connected to encoder housing ssignments SI, SH pin SI, SH pin SI, SH pin SI, SH pin SI, SH pin SI, SH pin SI, SH pin SI, SH pin SI, SH pin SI, SH pin SI, SH pin inv. inv. n. c. F0, H0, F, H, H0 G0, G F0, H0, F, H, H0 F0, H0, F, H, H0, 7, P0, R0, P, R, R0,, 7 SI 7, G0, G K, L M, E H C G, D, F, J F0, H0, F, H, H0 K, L M, E H C, D, F, G, J I0, I, K, L M, E H C G F D J P0, R0, P, R,,, R0 K, L M, E H C F D G, J SI K, L M, E H F D, G, J WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
5 Connector (Mx0.7) S, S, 7pin poss. S axial, 7pin, Connector connected to encoder housing S radial, 7pin, Connector connected to encoder housing ssignments S, S 7pin S, S 7pin inv. inv. n. c. G0, G 7 F0, H0, F, H, H0, 7 WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
6 Connector (M) S, S, pin poss. S axial, pin, Connector connected to encoder housing S radial, pin, Connector connected to encoder housing ssignments S, S pin S, S pin S, S pin S, S pin S, S pin inv. inv. n. c. G0, G 0,,,, 7, 9 F0, H0, F, H, H0 0,,,, 7, 9, I0, I, 0, 7, 9 P0, R0, P, R,,, R0 0, 7, 9, SI 0,,, 7, 9, WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
7 Connector (M) SR, SR, pin (clockwise) poss. SR axial, pin, Connector connected to encoder housing SR radial, pin, Connector connected to encoder housing ssignments SR, SR pin SR, SR pin SR, SR pin SR, SR pin SR, SR pin inv. inv. n. c. G0, G 0,,,, 7, 9 F0, H0, F, H, H0 0,,,, 7, 9, I0, I, 0, 7, 9 P0, R0, P, R,,, R0 0, 7, 9, SI 0,,, 7, 9, WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00 7
8 MILconnector S, pin poss. ssignments pin pin inv. inv. n. c. G0, G F C D E F0, H0, F, H, H0 F C D E WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
9 Valveconnector (IP) S7, pin poss. ssignments pin inv. inv. n. c. F0, H0, F, H, H0 WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00 9
10 Sensorconnector(Mx) S, SC,,,, pin poss. S axial, pin, Connector connected to encoder housing SC radial, pin, Connector connected to encoder housing S axial, pin, Connector connected to encoder housing SC radial, pin, Connector connected to encoder housing S axial, pin, Connector connected to encoder housing SC radial, pin, Connector connected to encoder housing S axial, pin, Connector connected to encoder housing SC radial, pin, Connector connected to encoder housing ssignments S, SC pin S, SC pin S, SC pin S, SC pin S, SC pin S, SC pin S, SC pin S, SC pin S, SC pin inv. inv. n. c. F0, H0, F, H, H0 F0, H0, F, H, H0 F0, H0, F, H, H0, 7, P0, R0, P, R, R0,, 7 SI 7, G0, G, 7, 9, 0,, F0, H0, F, H, H0,, 7, 9, 0,, I0, I, 9 7 0,, P0, R0, P, R,,, R ,,, WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00 0
11 Options Low temperature The encoder WDG T Discontinued product with the output circuit types F, G, H, I, P, R, F0, G0, H0, I0, P0, R0,,, is also available with the extended temperature range 0 C up to +0 C (measured at the flange). Order key C Cable length The encoder WDG T Discontinued product can be supplied with more than m cable. The maximum cable length depends on the supply voltage and the frequency; see www. wachendorffautomation.com/atd Please extend the standard order code with a three figure number, specifying the cable length in decimetres. Example: m cable = 00 IP7 The encoder WDG T Discontinued product can be supplied in a full IP7 version. Order key XXX = Decimeter Order key O Max. RPM: 00 rpm Permitted ShaftLoading, axial: 0 Permitted ShaftLoading, radial: 0 Max. PPR: 00 ppr Startingtorque: approx. cm at ambient temperature WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
12 Example Order o. Type Your encoder WDG T WDG T WDG T Pulses per revolution PPR: 000,, 0,, 0,,, 0,, 0,, 0, 0,, 7, 7, 90, 00, 0,, 7,, 0, 0, 0, 00,,, 0, 0,,, 00,, 0, 0, 00, 00,, 7, 00,, 70, 70, 7, 00, 0, 900, 000, 0, 00, 0, 70, 0, 00, 00, 000, 0, 00, 00, 000, 00, 000, 09,, 000, 0000, 00, 0000, 000 Vss Sin/Cos only 0, 0 Other PPRs on request Channels:, (SI: ) G Output circuit Resolution PPR up to 00 up to 000 (higher frequency) 00 up to 000 Power supply VDC Output circuit Order key 0 HTL H0 0 HTL inverted R0.7. TTL G0.7. TTL H0.7. TTL, RS comp., inverted I0.7. TTL, RS comp., inverted R0 0 0 HTL G 0 0 HTL H 0 0 HTL inverted I 0 0 HTL inverted R 0 0 TTL, RS comp., inverted 0 0 TTL, RS comp., inverted.7. TTL F0.7. TTL, RS comp., inverted P0 0 0 HTL F 0 0 HTL inverted P 0 0 TTL, RS comp., inverted 0, 0.7. Vpp sin/cos SI WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
13 Electrical connections K poss. Order key Cable: length ( m standard, WDG T: m) axial, shield not connected K axial, shield connected to encoder housing L radial, shield not connected K radial, shield connected to encoder housing L Connector: (shield connected to encoder housing) connector, Mx0.7, pin, axial SI connector, Mx0.7, pin, radial SH connector, Mx0.7, pin, axial SI connector, Mx0.7, pin, radial SH connector, Mx0.7, pin, axial SI connector, Mx0.7, pin, radial SH connector, Mx0.7, pin, axial SI connector, Mx0.7, pin, radial SH connector, Mx0.7, 7pin, axial S connector, Mx0.7, 7pin, radial S connector, M, pin, axial S connector, clockwise pin count, M, pin, axial SR connector, M, pin, radial S connector, clockwise pin count, M, pin, radial SR sensorconnector, Mx, pin, axial S sensorconnector, Mx, pin, radial SC sensorconnector, Mx, pin, axial S sensorconnector, Mx, pin, radial SC sensorconnector, Mx, pin, axial S sensorconnector, Mx, pin, radial SC sensorconnector, Mx, pin, axial S sensorconnector, Mx, pin, radial SC Options Without option Low temperature IP7 Cable length Order key Empty C O XXX = Decimeter Example Order o.= WDG T 000 G K WDG T Your encoder WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
14 For further information please contact our local distributor. Here you find a list of our distributors worldwide. Wachendorff utomation GmbH & Co. KG Industriestrasse 7 D Geisenheim Phone: +9 7 / 99 Fax: +9 7 / wdg@wachendorff.de WDG T Discontinued product Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 00
Encoder WDG 115T.
Encoder WDG T www.wachendorffautomation.com/wdgt Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDG 63Q.
Encoder WDG Q www.wachendorffautomation.com/wdgq Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDG 58A.
Encoder WDG www.wachendorffautomation.com/wdga Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
More informationEncoder WDG 58B.
Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
More informationEncoder WDG 40A.
Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDG 40A.
Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDG 100H.
Encoder WDG 00H www.wachendorffautomation.com/wdg00h Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDG 40E.
Encoder WDG 0E www.wachendorffautomation.com/wdg0e Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDGI 63Q.
ncoder WDGI Q www.wachendorffautomation.com/wdgiq Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDGI 58D.
ncoder WDGI D www.wachendorffautomation.com/wdgid Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDGI 58B.
ncoder WDGI www.wachendorffautomation.com/wdgib Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
More informationEncoder WDGI 58B.
ncoder WDGI www.wachendorffautomation.com/wdgib Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
More informationEncoder WDG 30A.
Encoder WDG 30A www.wachendorffautomation.com/wdg30a Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationEncoder WDGA 58B SSI.
Encoder WDGA 58B SSI www.wachendorff-automation.com/wdga58bssi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
More informationEncoder WDGA 36A SSI.
Encoder WDGA 36A SSI www.wachendorff-automation.com/wdga36assi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
More informationEncoder WDGA 36A CANopen
Encoder WDGA 36A CANopen www.wachendorff-automation.com/wdga36acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationEncoder WDGA 58A PROFINET-IO (cov)
Encoder WDGA 58A PROFINET-IO (cov) www.wachendorff-automation.com/wdga58apnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationEncoder WDGA 58B CANopen
Encoder WDGA 58B CANopen www.wachendorff-automation.com/wdga58bcan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationEncoder WDGA 58F PROFINET-IO (cov)
Encoder WDGA 58F PROFINET-IO (cov) www.wachendorff-automation.com/wdga58fpnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationEncoder WDGA 58A CANopen
Encoder WDGA 58A CANopen www.wachendorff-automation.com/wdga58acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationEncoder WDGA 58A RS485
Encoder WDGA 58A RS485 www.wachendorff-automation.com/wdga58ars485 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationEncoder WDGA 36A CAN SAE J1939
Encoder WDGA 36A CAN SAE J1939 www.wachendorff-automation.com/wdga36asaej1939 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationEncoder WDGA 36A RS485
Encoder WDGA 36A RS485 www.wachendorff-automation.com/wdga36ars485 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationEncoder WDGA 58E RS485
Encoder WDGA 58E RS485 www.wachendorff-automation.com/wdga58ers485 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationEncoder WDGA 58E PROFINET-IO (cov)
Encoder WDGA 58E PROFINET-IO (cov) www.wachendorff-automation.com/wdga58epnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationEncoder WDGA 36E CAN SAE J1939
Encoder WDGA 36E CAN SAE J1939 www.wachendorff-automation.com/wdga36e-saej1939 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More informationPRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationSpeed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
More informationMHAP HDmag. Features
Features MHP 200 - Version for axial screw mounting bsolute encoder with magnetic sensing and without bearings with integrated FPG signal processing bsolute resolution max. 17 bit singleturn dditional
More informationSpeed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
More informationEAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationDelivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationPOG 10 + DSL. Features
Features Freely programmable on and off switching speed Programming via included software (RS485 interface) TTL or HTL, EURO-flange and/or housing foot 3 / solid shaft ø11 mm DSL.R: 3 outputs speed controlled
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationInnovative System Solutions Own Development and Manufacture 3 Years Warranty Made in Germany
Innovative System Solutions Own Development and Manufacture 3 Years Warranty Made in Germany Rugged & Tough Updated: November 2006 since 1978 On the first few pages, we will demonstrate to you the major
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationEncoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn
Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More informationAbsolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationRotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
More informationType SCA94DD. Wind Power / Direct Drive
Wind Power / Direct Drive Type SCA94DD Specifically made for measurement of Speed and Position on slow revolving Direct Drive Generators on Wind Turbines High Resolution of Speed and Position High Update
More informationRotary Measuring Technology
--20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationRotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
More informationABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More informationROTARY ENCODERS FOR FEEDBACK APPLICATIONS PRODUCTS CATALOGUE. w w w. ems-i.co.uk
ROTARY ENCODERS FOR FEEDBACK APPLICATIONS PRODUCTS CATALOGUE w w w. ems-i.co.uk SHAFTED ROTARY ENCODERS ARS-5 / ARC-5 Series Body Size - 50mm ( Standard ) ARS ARC Series Incremental Rotary Encoders Small
More informationDSM5H & DSO5H MODELS SIL3 PLe INCREMENTAL ENCODERS
& MODELS SIL3 PLe INCREMENTAL ENCODERS Features Usable up to SIL3 and Cat.4 / PLe according to IEC 61508 / EN ISO 13849 Suitable for safe motor feedback according to IEC 61800-5-2 Robustness and excellent
More informationRotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationHB5M. Hollow Bore Optical Encoder Page 1 of 6. Description. Related Products & Accessories. Features
Description HB5M Page 1 of 6 The HB5M is a hollow bore (hollow shaft / thru-bore) optical encoder with a machined aluminum enclosure and a clear anodized protective finish. The HB5M optical incremental
More informationENC-IQ58S-H-PROG-ZCW-4-06-A-L1
IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible
More informationENC-CKP58-H-PROG-ZCW-4-06-A-L1
IP58/IP58S/CKP58 Programmable Incremental Encoders FEATURES Programmable Incremental Encoder Resolution from 1 to 65536 PPR Voltage 5 VDC or 10-30 VDC Push-Pull and Line Driver Compatible Output IP 65
More informationMaterial: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationHMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
More informationAMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationMHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 42 Long distance draw-wire sensors wiresensor P200 digital - Robust aluminium profile housing - Customized versions for OEM - Incremental/absolute
More informationSSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS
GENERAL INFORMA SSI ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS In many cases, the data transmitted from one system to another are subjected to magnetic fields and noise, by using standard interfaces,
More informationARS - ARC ROTARY ENCODERS. Series. Incremental INDUSTRIAL ROTARY ENCODERS UP TO PULSE VARIOS RESOLUTIONS VARIOUS SOLID SHAFT AND BODY DIAMETERS
ARS - ARC Series Incremental ROTARY ENCODERS INDUSTRIAL ROTARY ENCODERS UP TO 20.000 PULSE VARIOS RESOLUTIONS VARIOUS SOLID SHAFT AND BODY DIAMETERS CUSTOM DESIGNS Shaft Models Hollow Shaft Models Tel:
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationABSOLUTE ROTARY ENCODER MODBUS/TCP
Main Features - Compact and Heavy-Duty Industrial Model - Communication via Standard Protocols - Integrated Web Server - Interface: Modbus/TCP - Housing: 58 mm - Full shaft: 6 or 10 mm / Hub Shaft 15 mm
More informationAbsolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
More informationABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
More informationHB5M. Hollow Bore Optical Encoder Page 1 of 5. Description. Mechanical Drawing. Features
Description HB5M Page 1 of 5 The HB5M is a hollow bore (hollow shaft / thru-bore) optical encoder with a machined aluminum enclosure and an anodized protective finish. The HB5M optical incremental encoder
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationAbsolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationAbsolute Encoders. SSI & BiSS. CANopen CANlift
Absolute Encoders SSI & BiSS Profibus -DP CANopen CANlift www.turck.com www.turck.com Kübler by TURCK Absolute Encoders Safety-Lock Sendix Absolute with Fieldbus Interface Singleturn, Multiturn - with
More informationABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationEXAG - Dual Output Profibus / Incremental
Explosion Proof Profibus / Incremental EXAG Dual Output Profibus / Incremental Electrical Specifications General Ex d Proof Shaft Encoder Shaft: Profibus DPV2 Functionality Absolute Resolution up to 30
More informationComplete Solutions from Specialists. Rotary encoders for geared motors: 5820 M-Line
Rotary encoders for geared motors: 5820 M-Line Complete Solutions from Specialists Stable: Even under the toughest of uses. Versatile mounting options with individual torque arm solutions. Economic: Can
More informationMAGNETIC ABSOLUTE MULTITURN
MAGNETI ABSOLUTE MULTITURN ompact Robust Standard Find on page F2 Find on page F15 Find on page F28 ompact, Magnetic Type RM-97/RM-98 Analog F2 Type RM-99/RM-100 SSI F7 Type RM-101/RM-102 ANopen F11 ompact,
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
More informationShaft: Ø 10 mm or Ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - SSI Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm or Ø 12 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits Removable End Cap for on-site
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Ethernet Non removable end cap delivered with cable Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Ethernet - TCP/IP and MODBUS TCP communication
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Profibus-DP
PROCESS FIELD BUS Main Features - Approval II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: - DPV2-Functionality - max. 65536 steps per revolution
More information