Special Offers A PASSION FOR DETAIL THE MAGAZINE DEVOTED TO DETAIL MILLIMAR C THE NEW GENERATION

Transcription

1 THE MAGAZINE DEVOTED TO DETAIL PROMOTION PRICES VALID FROM 15. SEPTEMBER TO 15. NOVEMBER 2015 MARCAL 16 EWRi Wireless Digital Caliper in a Starter Pack, includes Software MarCom Std. See page 7 Special Offers A PASSION FOR DETAIL MILLIMAR C THE NEW GENERATION The C1200 Indicating instrument for electrical length measuring probes captivates through its unprecedented high resolution color display, simple intuitive operating, compact design and portability. See page 28 MARCATOR DIGITAL INDICATORS Now with switchable resolution from 0,0005 mm! See from page 18 MARCONNECT Wire data transmission: Simple, Reliable and Professional! See from page 20

2 Digimatic Digimatic - 2 MARCAL. THE REFERENCE CALIPER With the Reference System from Mahr the handling of a Digital Caliper has become much easier and more convenient: the zero position only has to be set once, the setting is stored for all further measurements. Due to the high degree of protection IP67 the MarCal 16 EWR is protected against dust, coolants and lubricants and is therefore ideal to be used in the most demanding environmental conditions, e.g. production. MARCAL 16 ER Digital Caliper Large display DIN , EUR Order no Functions: ON/OFF, AUTO-ON/OFF, RESET (Set display to zero), mm/inch, Reference System, LOCK function (key lock) Immediate measurement due to the Reference System Power supply: Battery, life of battery ca. 3 years Lapped guide way Slide and beam made of hardened stainless steel MarCal 16 ER, 200 mm, Order no Product Measuring range Resolution Depth rod Data output Height of digits Order no. mm (inch) mm/inch Ø1,5 mm EUR 16 ER (6 ) 0,01 / , 16 ER (6 ) 0,01 / , 16 ER (8 ) 0,01 / , ,9, 16 ER (12 ) 0,01 / , ,9, MARCAL 16 EWR Digital Caliper Excellent protection against dust, coolants and lubricants IP67 110, EUR Order no Functions: ON/OFF, AUTO-ON/OFF, RESET (Set display to zero), mm/inch, Reference System, LOCK function (key lock) Immediate measurement due to the Reference System Excellent resistant against dust, coolants and lubricants: Protection class IP67 Power supply: Battery, life of battery ca. 3 years Lapped guide way Slide and beam made of hardened stainless steel All illustration The net prices MarCal 16 EWR, 200 mm, Order no Product Measuring range Resolution Depth rod Data output Height of digits Order no. Ø1,5 mm (inch) mm/inch mm EUR 16 EWR (6 ) 0,01 / , 16 EWR (6 ) 0,01 / , 16 EWR (8 ) 0,01 / , , 16 EWR (12 ) 0,01 / , , All illustrations and technical data are without guarantee. All list prices are the recommended retail prices. The net prices are shown in j, they exclude Value Added Tax and are valid from until

3 + 3 Furthermore, if you need to document your measured data, the interface offers you the optimal connection to all evaluation systems either via integrated wireless or data cable. MARCAL 16 EWRi Digital Caliper With integrated wireless IP67 integrated wireless Promotion-Set Starter Pack: incl. i-stick wireless receiver and MarCom Standard 5.0 see Order no and , EUR Order no Functions: ON/OFF, AUTO-ON/OFF, HOLD (Storage of measured values), RESET (Set display to zero), PRESET (Enter a numerical value), mm/inch, Reference System, LOCK function (key lock), DATA (Data transmission) Integrated wireless transmitter Immediate measurement due to the Reference System Excellent resistant against dust, coolants and lubricants: Protection class IP67 Power supply: Battery, life of battery ca. 3 years Lapped guide way Slide and beam made of hardened stainless steel Product Measuring range Resolution Depth rod Details Order no. Ø1,5 mm (inch) mm/inch EUR 16 EWRi (6 ) 0,01 / , Data interace: Integrated wireless 16 EWRi (6 ) 0,01 / , 16 EWRi (6 ) 0,01 /.0005 Starter Pack: incl. i-stick wireless receiver , 16 EWRi (6 ) 0,01 /.0005 and MarCom Standard , MARCAL 16 GN Vernier Caliper with scale reading The classic precision caliper with 1 /50 mm vernier s and technical data are without guarantee. All list prices are the recommended retail prices. are shown in j, they exclude Value Added Tax and are valid from until , EUR Order no All reading parts have a glare free, satin chrome finish Slide and beam made of hardened stainless steel Measuring faces are made of hardened stainless steel Measuring blades for inside measurement Step measuring function Raised guides ways for the protection of the scale Product Measuring range Readings Readings Error limit Fine adjustment Order no. mm mm inch mm EUR 16 GN , , , 16 GN , , , 16 GN , , , 16 GN ,02 0, , 16 GN ,02 0, , 16 GN ,02 0, , 16 GN , , , 16 GN , , , 16 GN , , , All illustrations and technical data are without guarantee. All list prices are the recommended retail prices. The net prices are shown in j, they exclude Value Added Tax and are valid from until

4 - 4 MARCAL. THE LIGHT WEIGHT Our Digital Caliper 18 EWR has a lightweight construction due to the narrow cross section (additionally with weight reducing holes in the measuring jaws from 500 mm) for optimum handling during measurement. The 16 EWV is the trouble shooter for all difficult to reach measuring points, for example: recesses, grooves, etc. In conjunction with specific anvils we have a solution for every measuring problem. MARCAL 18 EWR Digital Caliper The steel lightweight IP65 Digimatic 319, EUR Order no Functions: AUTO-ON/OFF, DATA (Data transmission via connection cable), ON/OFF, PRESET (Enter a numerical value), RESET (Set display to zero), Reference System, LOCK function (key lock), mm/inch Immediate measurement due to the Reference System Excellent resistant against dust, coolants and lubricants: Protection class IP65 Power supply: Battery, life of battery ca. 3 years Height of digits: 10 mm (300 mm), 12,5 mm (500 mm) Product Measuring range Resolution Details Order no. mm (inch) mm/inch EUR 18 EWR 300 (12 ) 0,01 / , with measuring blades for external dimensions 18 EWR 500 (20 ) 0,01 / , 18 EWR 300 (12 ) 0,01 / , without measuring blades for external dimensions 18 EWR 500 (20 ) 0,01 / , DIGIMAR 814 SR Height Measuring and Scribing Instruments Exact positioning per hand Digimatic ABS System 489, EUR Order no Functions: RESET (Set display to zero), mm/inch, ABS (Switch between relative and absolute measurement), Reference Lock/Unlock, PRESET (Enter a numerical value), DATA (Data transmission via connection cable), AUTO-ON/OFF Life of battery up to 3 years Max. measuring speed 1,5 m/s (60 /s) Sturdy heavy-duty base, easy to handle Hardened and lapped contact surface which produce both a smooth and even movement Slide and beam made of hardened stainless steel Hand crank for positioning and measuring Fine adjustment Locking screw Interchangeable scriber point, carbide tipped Product Measuring range Resolution Details Order no. mm (inch) mm/inch EUR 814 SR (0 14 ) 0,01 / , Height of digits: 12 mm 814 SR (0 24 ) 0,01 / ,

5 + 5 MARCAL 16 EWV Universal Digital Caliper The trouble shooter IP67 Digimatic 399, EUR Order no Functions: AUTO-ON/OFF, DATA (Data transmission via connection cable), HOLD (Storage of measured values), ON/OFF, PRESET (Enter a numerical value), RESET (Set display to zero), Reference System, LOCK function (key lock), mm/inch Immediate measurement due to the Reference System Excellent resistant against dust, coolants and lubricants: Protection class IP67 Power supply: Battery, life of battery ca. 3 years Lapped guide way Slide and beam made of hardened stainless steel Scope of supply: Includes standard accessories Product Measuring range Resolution Depth rod Details Order no. Ø1,5 mm (inch) mm/inch EUR 16 EWV (8 ) 0,01 /.0005 Height of digits: 8,5 mm , Applications: The 16 EWV can also be used as a standard caliper (4 types of measurement). When used in conjunction with the standard accessories (see table below); it is possible to measure recesses, grooves, etc.. In conjunction with the additional accessories; threads, bores, serrations, etc. can be measured. 16 Eea Anvils for outside measurements 16 Eei Anvils for inside measurements Standard Accessories are included in the set Catalog no. Description Req d quantity Remarks 16 Em Depth Measuring Bridge (75 x 7 mm) 1 16 Eel Setting Gage for inside measurement (50 mm) 1 16 Ec Measuring Force Device 1 16 Eea 1 Round and flat anvils for outside measurement (Ø 3,5 x Length 12 mm) 2 up to dia. 175 mm 16 Eea 2 Round and flat anvils for outside measurement (Ø 1,5 x Length 6 mm) 2 up to dia. 175 mm 16 Eea 3 Blade shaped and flat anvils for outside measurement (3,5 x 1 x Length 6 mm) 2 up to dia. 175 mm 16 Eei 1 Round and spherical (R5) anvils for inside measurement (Ø 3,5 x Length 6 mm) 2 from dia. 27 mm 16 Eei 2 Round and spherical (R5) anvils for inside measurement (Ø 1,5 x Length 6 mm) 2 from dia. 39 mm 16 Eei 3 Blade shaped and spherical (R5) anvils for inside measurement (3,5 x 1 x Length 6 mm) 2 from dia. 39 mm Stainless steel cylinder screw M2x8 2

6 Digimatic - 6 MICROMAR. EVERYTHING ROTATES AROUND PRECISION Micrometers belong alongside Calipers to the most frequently used Hand Measuring Instruments. With the precision ground spindle, the carbide tipped measuring faces and a robust frame construction; the modern Micrometer from the Micromar series ensures maximum precision and a long working life. MICROMAR 40 ER / 40 EWR Digital Micrometer With a ratchet for one handed operation 145, EUR Order no ABS Functions: RESET (Set display to zero), ABS (Display can be set to zero, without losing the reference to the Preset value), mm/inch, PRESET (Enter a numerical value), Reference System, LOCK function (key lock), DATA (Data transmission via connection cable) Immediate measurement due to the Reference System High constrast display Spindle and anvil are carbide tipped Rapid drive Hard lacquered steel frame, heat insulated Power supply: Battery, life of battery ca. 2 years Product Measuring range Resolution Spindle thread pitch IP40 IP65 Order no. mm (inch) mm/inch mm EUR 40 ER 0 25 (0 1 ) 0,001 / , , 40 EWR 0 25 (0 1 ) 0,001 / , , 40 EWR 0 25 (0 1 ) 0,001 / , , MICROMAR 40 EWR Digital Micrometers in Set With a ratchet for one handed operation Digimatic IP65 ABS 975, EUR Order no Functions: RESET (Set display to zero), ABS (Display can be set to zero, without losing the reference to the Preset value), mm/ inch, PRESET (Enter a numerical value), Reference System, LOCK function (key lock), DATA (Data transmission via connection cable) Immediate measurement due to the Reference System High constrast display Spindle and anvil are carbide tipped Rapid drive Hard lacquered steel frame, heat insulated Power supply: Battery, life of battery ca. 2 years Product Measuring range Resolution Spindle thread pitch Number of Micrometers Order no. mm (inch) mm/inch mm EUR 40 EWR (0 4 ) 0,001 / , ,

7 + 7 MICROMAR 40 F Micrometer with Dial Comparator With the integrated Comparator measure accurately to the µm DIN , EUR Adjustable tolerance markers Chrome plated steel frame, heat insulated Retraction of the movable anvil Carbide tipped measuring faces Measuring spindle made of stainless steel, hardened throughout and ground, lockable Applications: Order no Absolute setting with the Micrometer, comparative reading on the Dial Comparator. Ideal for testing standard precision parts. Product Measuring range Reading Spindle thread pitch Measuring faces Order no. Comparator Flatness Parallelism mm mm mm µm µm EUR 40 F ,001 0,5 1 0, , 40 F ,001 0,5 1 0, , MICROMAR 40 A Micrometer The classical Micrometer DIN ,50 EUR Operating and readings parts have a glare free, satin chrome finish Spindle and anvil are made of hardened steel, carbide tipped Heat insulators Rapid drive with integrated ratchet Locking device Order no Product Measuring range Reading Spindle thread pitch Details Order no. mm mm mm EUR 40 A ,01 0,5 Hard lacquered steel frame ,50

8 - 8 MICROMAR INTERNAL MICROMETERS The Micromar 3-Point Internal Micrometers are indipensible for rapid measurement of bore holes in any production plant. The 3 laterally positioned anvils in the measuring heads together with highly accurate measuring force for the self-centering of the measuring instrument in the bore hole ensures reliable and accurate measuring results. MICROMAR 44 AS Self-Centering Inside Micrometer Sets For measurement to the bottom of the bore hole 1.375, EUR Order no DIN Operating and readings parts have a satin chrome finish Spindle is made from stainless steel, hardened and ground Rapid drive with integrated ratchet Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120 Anvils from 12 mm are carbide tipped From 12 mm the anvils can be used to measure to the bottom of a bore From 40 mm all measuring heads are made from aluminum to reduce weight Product Measuring range Reading Error limit Number of Setting rings Order no. mm mm µm Micrometers mm EUR 44 AS , , , 44 AS , , 44 AS , , , 44 AS , , , MICROMAR 44 EWR Self-Centering Digital Inside Micrometer Sets Immediate measurement due to the Reference System 1.725, EUR Order no DIN Digimatic IP52 ABS Functions: RESET (Set display to zero), ABS (Set display to zero without the reference to zero beong lost), mm/inch, PRESET (Enter a numerical value), Reference System, LOCK function (key lock), DATA (Data transmission via connection cable) Threaded connection for changing the measuring heads Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120 Anvils from 12 mm are carbide tipped From 12 mm the anvils can be used to measure to the bottom of a bore From 40 mm all measuring heads are made from aluminum to reduce weight Product Measuring range Reading Error limit Number of Setting rings Order no. mm mm/inch µm Micrometers mm EUR 44 EWR ,001 / , , 44 EWR ,001 / , 44 EWR ,001 / , , 44 EWR ,001 / , ,

9 + 9 MICROMAR 844 AS Self Centering Measuring Pistol Set, incl. MarCator 1086 R Digimatic ABS 0 IP42 For rapid measurements 1.750, EUR Order no Micromar 844 AS Threaded connection for changing the measuring heads Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120 Anvils from 12 mm are carbide tipped From 12 mm the anvils can be used to measure to the bottom of a bore From 40 mm all measuring heads are made from aluminum to reduce weight Digital indicator can be rotated to any desired measuring position MarCator 1086 R Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (Enter a numerical value), (Enter tolerance limit values), ABS (Display can be set to zero, without losing the reference to the Preset value), <0> (Tolerance GO / NO GO display mode), DATA (Data transmission via connection cable), Factor (adjustable), LOCK (Lock individual keys) Immediate measurement due to the Reference System Height of digits: 11 mm Data interface: Digimatic, Opto, Power supply: Battery, life of battery ca. 3 years IP Protection class: IP 42 Product Measuring range Number of measuring Setting rings Indicator Resolution Order no. mm heads 44 Ak mm Included mm/inch EUR 844 AS , 10 0,0005 / , 844 AS MarCator 0,0005 / , 844 AS , R 0,0005 / , 844 AS , 85 0,0005 / ,

10 - 10 MARTEST. HIGHLY SENSITIVE MEASUREMENT Since 1936 Mahr is one of the leading global producers of Test Indicators. The sensitive computer-optimized shockproof mechanism of the test indicator ensures maximum relibability and precision. MarTest Test Indicators are ideal for use in workshop conditions due the dial of the Test Indicators being sealed therefore they are impervious to the penetration of liquids. MARTEST 800 S / SG / SA / SGA Test Indicators - Standard Version DIN 2270 SHOCK PROOF 65, EUR Order no High contrast dial face, sealed with an O-Ring Satin chrome finished housing with 3 integrated dovetail guide ways Shockproof mechanism Anti magnetic Atomatic matching to sensing direction, thus ensuring error free reading Double lever supported in ball bearings, overload protection provided by slip clutch Contact point wth carbide ball ø 2 mm Now available with hardened mineral glass, ideal against breakage and scratching Product Measuring range Reading Dial dia. Length of styli Order no. mm mm mm mm EUR 800 S 27, , ± 0,4 800 SG , 0,01 14,5 800 SA 27, , ± 0, SGA , MARTEST 800 SGM Test Indicators - For high accuracy measurement DIN 2270 SHOCK PROOF 92, EUR Order no Now available with hardened mineral glass, ideal against breakage and scratching High contrast dial face, sealed with an O-Ring Satin chrome finished housing with 3 integrated dovetail guide ways Shockproof mechanism Anti magnetic Atomatic matching to sensing direction, thus ensuring error free reading Double lever supported in ball bearings, overload protection provided by slip clutch Contact point wth carbide ball ø 2 mm Product Measuring range Reading Dial dia. Length of styli Order no. mm mm mm mm EUR 800 SGM ± 0,1 0, , ,

11 + 11 MARTEST 800 SL / SGL Test Indicators - with 2 long contact points DIN 2270 SHOCK PROOF Promotion-Set Includes an additional ruby contact point dia. 2 mm 119, EUR Order no High contrast dial face, sealed with an O-Ring Satin chrome finished housing with 3 integrated dovetail guide ways Shockproof mechanism Anti magnetic Atomatic matching to sensing direction, thus ensuring error free reading Double lever supported in ball bearings, overload protection provided by slip clutch Contact point wth carbide ball ø 2 mm Now available with hardened mineral glass, ideal against breakage and scratching Product Measuring range Reading Dial dia. Length of styli Order no. mm mm mm mm EUR 800 SL , ± 0,25 0,01 27,5 41, SGL , MARTEST 800 V / VGM Test Indicators - Vertical model DIN 2270 SHOCK PROOF 87, EUR Order no Now available with hardened mineral glass, ideal against breakage and scratching High contrast dial face, sealed with an O-Ring Satin chrome finished housing with 3 integrated dovetail guide ways Shockproof mechanism Anti magnetic Atomatic matching to sensing direction, thus ensuring error free reading Double lever supported in ball bearings, overload protection provided by slip clutch Contact point wth carbide ball ø 2 mm Product Measuring range Reading Dial dia. Length of styli Order no. mm mm mm mm EUR 800 V ± 0,4 0,01 27, , 14,5 800 VGM ± 0,1 0, ,

12 - 12 MARCATOR POINTS YOU IN RIGHT DIRECTION Due to their versatility both Dial and Digital Indicators are the most frequently applied transducers, such as our MarCator series. Our mechanical Dial Indicators have precision gears and pinions ensuring maximum accuracy, they are also available in shock and waterproof versions. MARCATOR 810 A Precision Dial Indicator The classic indicator with a lifter protection cap 29,50 EUR Order no High constrast dial face Adjustable colored tolerance markers for optimum contrast Chrome plated metal housing Lifter protection cap with dust protection function High precision gears and pinions DIN 878 Product Measuring range Reading Dial dia. Details Order no. mm mm mm EUR 810 A 10 0,01 50 Measuring force: 0,7-0,13 N ,50 MARSTAND 815 MG Indicator Stand with Magnetic Base Simple fix into position with one handle 162, EUR Order no D indicator Stand, can reach any position within the operating range Easy to position, all 3 joints can been fixed into position with just one handle Maintenance free mechanical clamping system Arm components are made of black anodized high quality aluminum Dial Indicator holder with mount dia. 8 mm and dovetail for Test Indicators Equipped with micro fine adjustment, free of backlash Very powerful ON/OFF magnet Supply of supply: Excludes Indicator Product Fine adjustment Total height Projection (max.) V-way for shaft Magnetic Order no. range dia. force mm mm mm mm N EUR 815 MG , 815 MG , 815 MG , 815 MG ,

13 + 13 MARCATOR 1075 R Digital Indicators With large display IP52 Digimatic 109, EUR Order no Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (Enter a numerical value), DATA (Data transmission via connection cable), LOCK function (key lock), AUTO-ON/OFF High constrast LCD Lifter protection cap on the measuring spindle Power supply: Battery, life of battery ca. 3 years Product Measuring range Resolution Details Order no. mm (inch) mm/inch EUR 1075 R 12,5 (.5 ) 0,01 / , 1075 R 12,5 (.5 ) 0,005 /.0001 Height of digits: 12 mm , 1075 R 12,5 (.5 ) 0,001 / , MARCATOR 1086 R Digital Indicators With tolerance display Digimatic ABS 0 IP42 mm 215, EUR Order no Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (Enter a numerical value), (Enter tolerance limit values), ABS (Display can be set to zero, without losing the reference to the Preset value), <0> (Tolerance GO / NO GO display mode), DATA (Data transmission via connection cable), Factor (adjustable), LOCK (Lock individual keys) High constrast LCD Operating and display unit (bezel) can be rotated 280 Lifter protection cap on the measuring spindle Immediate measurement due to the Reference System Power supply: Battery, life of battery ca. 3 years mm mm mm mm mm Product Measuring range Resolution Details Order no. mm (inch) mm/inch EUR 1086 R 12,5 (.5 ) 0,01 /.0005 Height of digits: 11 mm ,

14 - 14 DIGITAL MEASUREMENT WITH MARCATOR Our innovative range of Digital Indicators contain high precision electronic measuring systems, which enables numerous additional measuring functions without the loss of an analog display. Simple to operate, the large easy to read display and the possibility of a quick and simple data processing of all your measurement results our Digital Indicators meet all requirements of a modern measuring instrument. MARCATOR 1086 R/1086 RI Digital Indicators Resolution from 0,5 µm and Tolerance display 265, EUR Order no ABS 0 IP42 Digimatic Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (Enter a numerical value), (Enter tolerance limit values), ABS (Display can be set to zero, without losing the reference to the Preset value), <0> (Tolerance GO / NO GO display mode), DATA (Data transmission via connection cable), Factor (adjustable), LOCK (Lock individual keys) High constrast LCD Operating and display unit (bezel) can be rotated 280 Lifter protection cap on the measuring spindle Immediate measurement due to the Reference System Power supply: Battery, life of battery ca. 3 years 0 integrated wireless mm mm mm 306, EUR mm Order no mm mm Promotion-Set Starter Pack: incl. i-stick wireless receiver and MarCom Standard 5.0 see Order no Product Measuring range Resolution switchable Details Order no R 12,5 (.5 ) mm (inch) mm (inch) EUR , 1086 R 25 (1 ) 0,0005 / 0,001 / 0,002 / 0,005 / , 1086 Ri 12,5 (.5 ) 0,01 mm , Integrated wireless 1086 Ri 25 (1 ) ( / /.0001 /.0002 / ,.0005 ) Starter Pack: incl. i-stick wireless receiver 1086 Ri 12,5 (.5 ) , and MarCom Standard 5.0

15 + 15 MARCATOR 1087 R/1087 RI Digital Indicators Resolution from 0,5 µm and dynamic Max/Min functions 335, EUR Order no ABS MAX MIN 0 IP42 Digimatic Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (Enter a numerical value), (Enter tolerance limit values), MAX/MIN (Store the search for the reversal point), TIR (MAX-MIN) for testing concentricity and flatness, ABS (Display can be set to zero, without losing the reference to the Preset value), DATA (Data transmission via connection cable), Factor (adjustable), LOCK (Lock individual keys) High constrast LCD Operating and display unit (bezel) can be rotated 280 Lifter protection cap on the measuring spindle Immediate measurement due to the Reference System Power supply: Battery, life of battery ca. 3 years integrated wireless MAX MIN 379, EUR Order no MAX MAX-MIN (TIR) MIN Product Measuring range Resolution switchable Details Order no. mm (inch) mm/inch EUR 1087 R 12,5 (.5 ) , 0,0005 / 0,001 / 0,002 / 0,005 / 0,01 mm 1087 R 25 (1 ) , ( / /.0001 /.0002 /.0005 ) 1087 Ri 12,5 (.5 ) Integrated wireless ,

16 - 16 THE GIANTS OF DATA TRANSMISSION In modern production it is imperative that measuring results are recorded and evaluated. These results are not only valuable benchmarks for assessment but can also be used to evaluate the products as well as evaluating and optimizing the production processes. Mahr offers not only an up-to-date solution to data transmission but the highest standard of wireless data transmission. Our aims: Simple, Reliable and Professional! MARCONNECT i-stick Wireless receiver for measuring instruments with integrated wireless Wireless receiver i-stick incl. Software-Interface integrated wireless 67, EUR Order no Measure without any troublesome additional external modules Large freedom of movement Secure and simple data transmission Long battery life span Inexpensive Supplied with Software MarCom Std. 5.0 Product i-stick Number of channels 3 Number of connectable devices with Integrated Wireless 8 per Stick Radio frequency MHz 2400 Distance of radio wave up to 6 m For measuring instruments MarCal 16 EWRi / 30 EWRi MarCator 1086 Ri / 1087 Ri / 1087 BRi Order no Scope of supply i-stick + MarCom Standard i-stick + MarCom Professional EUR 67, 252, Product Description Order no. EUR MC-R Remote control for MarCom , MARCOM PROFESSIONAL 5.0 Software-Interface Measuring data processing 220, EUR Order no integrated wireless Integrated virtual interface boxes Possible to connect an SPS Software via a virtual interface box Freely configure the desired data transmission (e-stick, i-stick, FM 2,, RS232) Inexpensive Product MarCom Professional 5.0 Number of connected wireless receivers i-stick 4 Number of connectable devices with Integrated Wireless 32 Number of connected wireless receivers e-stick 1 Number of connectable sender modules for the e-stick 8 Number of connected wireless receivers FM 2 1 Number of connectable sender modules for the wireless receivers FM Number of devices to be connected with a interface 128 Number of connectable foot switches 128 Number of devices to be connected with a interface 2 Number of virtual Interface boxes (8 inputs) 4 Order no EUR 220,--

17 + 17 MARCONNECT e-stick Wireless receiver for Retrofit to wireless 67, EUR Order no Optional wireless connection for all Mahr Hand Measuring Instruments with a data interface Wireless data transmission from the measuring instrument to a PC Secure data transmission, received data is acknowledged by the PC to the measuring instrument Compact transmitter, does not have an external antenna Extensive wireless product range Bi-directional wireless link (remote control form measuring instruments) Product e-stick Number of channels 3 Number of connectable sender modules for the e-stick 8 Radio frequency MHz 2400 Distance of radio wave up to 6 m For Measuring instruments Sender module 16 EWe, 2000 e, RS232 e, 1082 e Order no Scope of supply e-stick + MarCom Standard e-stick + MarCom Professional EUR 67, 252, 249, EUR Order no , EUR Order no Product Description For Measuring instruments Order no. EUR 16 EWe Sender module for e-stick MarCal 16 ER, 16 EWR, 16 EWV, 30 EWR, 30 EWN Digimar 814 SR Micromar 40 EWR, 40 EWS, 40 EWV, 44 EWR, 46 EWR MarCator 1075 R, 1086 R, 1087 R, 1087 BR MarSurf PS e Sender module for e-stick Digimar 816 CL MarCator 1088 / 1088W Millimess 2000, 2001, 2100, µmaxµm II Millimar C1200 RS232 e Sender module for e-stick Millimar C1208, C1216, C1245, S1840 Digimar 817 CLM , , ,

18 - 18 REACH OUT TO THE TOP Digimar Height Measuring Instruments guarantee a maximum of both flexibility and quality. Our motorized Digimar Height Measuring Instruments are simple to operate, all the basic functions can be executed with a single key as well as offering a maximum of ease and accuracy. DIGIMAR 817 CLM Height Measuring Instrument With Quick Mode. Rapid measurement at the highest accuracy 2D 4.999, EUR Order no Functions: Contacting from below and above Reversal point of a bore hole / shaft (above and/or below) Calculate distances and/or symmetry Dynamice measuring functions Measuring perpendicularity and straightness Measure in 2D mode Measuring programs Statistics Process measured data etc. Operating and display unit: Large and clearly defined function keys Easy to read background lit graphic LCD display Operator guidance with self-explanatory icons / pictograms Secure the future due to software update potential Selectable Auto-off function, without loss of measured values Measuring system: Excellent accuracy and reliabilty due to the optical incremental measurement system with the double reader head Dynamic probing system enabling high repeatability Air bearings system for light and smooth movement Precise measuring head on stainless steel guideways Motorised measuring carriage simplifies measurement runs Probe constant remains after the instrument is switched off Integrated rechargeable battery with a long operating time span for mains independent measurement Temperature compensation with an integrated temperature sensor Product 817 CLM Measuring range mm Range of application from... to mm Resolution mm 0,01, 0,005, 0,001, 0,0005, 0,0001 Error limit (1,8 + L/600) L in mm Repeatability: Bore µm 1 Repeatability: Plane µm 0,5 Perpendicularity error in µm µm Operating time max. h 10 Measuring force N 1,0 +/ 0,2 N Permissible relative air humidity non-condensed % 65 Working temperature C 20 Operating temperature C Order no EUR 4.499, 4.999, 8.699,

19 + 19 DIGIMAR 816 CL Height Measuring Instrument Perfect for accurate measurements in production area 1D 3.699, EUR Order no Functions: Contacting from below and above width between ledge and/or distance between a groove incl. center of the ledge and/or groove Diameter of a bore hole and/or shaft incl. center of the bore hole and/or shaft Reversal point of a bore hole / shaft (above and/or below) Calculate distances and/or symmetry Dynamic measuring functions Measuring programs Process measured data Operating and display unit: Easy to read background lit graphic LCD display Large and clearly defined function keys Operator guidance with self-explanatory icons / pictograms Possible to set additional zero points on a work piece Memory can store up to 99 measured values Measuring system: Excellent accuracy and reliabilty due to the optical incremental measurement system with the double reader head Dynamic probing system enabling high repeatability Air bearings system for light and smooth movement Precise measuring head on stainless steel guideways Motorised measuring carriage simplifies measurement runs Probe constant remains after the instrument is switched off Integrated rechargeable battery with a long operating time span for mains independent measurement Temperature compensation with an integrated temperature sensor Product 816 CL Measuring range mm Range of application from... to mm Resolution mm 0,01, 0,001 Error limit (2,8 + L/300) L in mm Repeatability: Bore µm 3 Repeatability: Plane µm 2 Perpendicularity error in µm µm Operating time max. h 10 Measuring force N 1,0 +/ 0,2 N Permissible relative air humidity non-condensed % 65 Working temperature C 20 Operating temperature C Order no EUR 3.199, 3.699,

20 20 ROUGHNESS WITH PRECISION Wherever surface structures can have a influence on the function, processing or appearance of both components or products, careful examination and scrutinous testing is paramount. Top quality from Mahr, expertise and knowhow MarSurf is the solution for all your surface metrology requirements! MARSURF PS 1 SET Mobile Roughness Measurement Device incl. PS 1-Explorer Software Automatic selection of the filter and traversing length 1.780, EUR Order no Product Measuring range µm Parameters Stylus tip Calibration function Memory Dimensions H x W x TD Weight Measuring principle Pick-up Measuring force Order no. kg N EUR On-site surface roughness measurement during the production process Roughness standard integrated into casing Automatic selection of filter and traversing length conforming to standards Dynamic calibration function Individual sampling lengths and short cutoff can be selected Phase correct profile filter (Gaussian filter) according to DIN EN ISO 11562, special filter according to DIN EN ISO , lsfilter according to DIN EN ISO3274 (can be disabled) µm / µinch switchable The scope of supply includes: Drive unit with a traversing length of up to 17,5 mm Skidded probe with measuring range 350 µm, 2 µm/90 diamond stylus tip, measuring force 0,7 mn Height adjustment accessory, cable, carrying case, charger / mains adapter, etc. Includes Multilingual PS1-Explorer PC Software document results and saving profiles on a PC PS Ra, Rq, Rz (Ry (JIS) entspr. Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) entspr. Rmr), RSm, RSk, S, CR, CF, CL, R, Ar, Rx 2 µm Dynamic, Ra, Rz, Rsm donnée precedente 100 profils et resultats 140 x 50 x 70 1,1 Stylus method Inductive skidded pick-up ca. 0,7 mn , Universal use on processing machinery or for incoming goods inspection

21 + 21 MARSURF M 300 SET Mobile Roughness Measurement Device Ideal for accurate measurement in production 3.499, EUR Order no Simply scan the QR-Code and watch in the Mahr YouTube-channel a video about the Mobile Roughness Measurement MarSurf M 300. Roughness standard integrated into casing Automatic selection of filter and traversing length conforming to standards Individual sampling lengths and short cutoff can be selected Printing of R-profile (ISO/ASME/JIS), P-profile (MOTIF), material ratio curve, measuring record Measuring units (μm/μinch) and standards (ISO/JIS/ASME/ MOTIF) are selectable The scope of supply includes: Evaluation unit M 300 Drive unit RD 18 with integrated roughness standard Standard pick-up PHT / 2 µm (conforming to standards) Height adjustment accessory, pick-up protection, 2 x cables, carrying case, etc. Product M 300 Measuring range µm 350 Parameters Ra, Rz (Ry (JIS) entspr. Rz), Rz (JIS), Rq, Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) entspr. Rmr), RSm, RSk, S, CR, CF, CL, R, Ar, Rx, Rv Stylus tip µm 2 µm Calibration function Dynamic Memory (internal) Store up to max results and max. 30 profiles Dimensions (L x W x H) of the Drive Unit mm 130 x 70 x 50 Dimensions (L x W x H) of the Evaluation Unit mm 190 x 140 x 75 Weight of the Drive Unit g ca. 300 Weight of the Evaluation Unit kg ca. 1 Measuring principle Stylus method Pick-up Inductive skidded pick-up Measuring force N ca. 0,7 mn Order no EUR 3.499,

22 - 22 ROUGHNESS WITH PRECISION Wherever surface structures can have a influence on the function, processing or appearance of both components or products, careful examination and scrutinous testing is paramount. Top quality from Mahr, expertise and knowhow MarSurf is the solution for all your surface metrology requirements! MARSURF M 300 C SET Mobile Roughness Measurement Device Ideal for accurate measurement in production 3.499, EUR Order no Note: An additional seperate drive unit MarSurf RD 18 C2 for transverse tracing for M 300 C is also available! Automatic selection of filter and traversing length conforming to standards Individual sampling lengths and short cutoff can be selected Printing of R-profile (ISO/ASME/JIS), P-profile (MOTIF), material ratio curve, measuring record Measuring units (μm/μinch) and standards (ISO/JIS/ASME/ MOTIF) are selectable The scope of supply includes: Evaluation unit M 300 C Drive unit RD 18 C Standard pick-up PHT 6-350/2µm (conforming to standards) Roughness standard PRN 10 with a Mahr calibration certificate Height adjustment accessory, pick-up protection, 1 x cable (for connection to a PC), carrying case, etc. Product M 300 C Measuring range µm 350 Parameters Ra, Rz (Ry (JIS) entspr. Rz), Rz (JIS), Rq, Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) entspr. Rmr), RSm, RSk, S, CR, CF, CL, R, Ar, Rx, Rv Stylus tip µm 2 µm Calibration function Dynamic Memory (internal) Store up to max results and max. 30 profiles Dimensions (L x W x H) of the Drive Unit mm 139 x 26 Dimensions (L x W x H) of the Evaluation Unit mm 190 x 140 x 75 Weight of the Drive Unit g ca. 300 Weight of the Evaluation Unit kg ca. 1 Measuring principle Stylus method Pick-up Inductive skidded pick-up Measuring force N ca. 0,7 mn Order no EUR 3.499,

23 + 23 MARSURF M 400 Mobile Roughness Measurement Device The best of the Mobiles! Easy. Fast. Innovative , EUR Order no Upside down measurement with vee-block. Automatic zero setting of the BFW 250 MarSurf measuring station with measuring stand ST-G 9.950, EUR Order no Only a few seconds of setting time required due to motorized height adjustment of the drive unit with automatic zero setting Flexible handling with cable-free Bluetooth connection Concise, clear and easy due to brilliant color display for the depiction of results and operator guidance Flexible handling due to operation with AC adapter or built-in battery Internationally up to date with all common parameters as per ISO, JIS, ASME, many integrated languages Documentation with quality with integrated thermal printer for printout of profile and results Skidless tracing with high precision probe system Fast probe arm change due to magnetic probe arm holder Protection from damage Standardized measuring point density despite increased measuring speed, traversing length 26 mm The scope of supply M 400 Set includes: Evaluation Unit MarSurf M 400 Drive Unit MarSurf SD 26 incl. probe system BFW 250 Standard probe arm ( ) 1 thermo paper roll Wide-range AC adapter mit 3 adapters 2 x cables (to connect to PC and for use with cable), operating instructions, carrying case The scope of supply Measuring Station M 400 with ST-G includes: MarSurf M 400 Set Mount for measuring stand Measuring stand ST-G with 10 mm T-groove Roughness standard PRN 10 with a Mahr calibration certificate Product M 400 Measuring range µm 500 Parameters Ra, Rt, Wa, Rq, R3z, Wq, Rz, RPc, WSm, RzJ, HSC, Wsk, Rmax, Rmr tp, Wt, Rp, RSm, R, RpA, S, AR, Rpm, Rdq, AW, Rv, Rsk, RX, Rpk, Rku, Wx, Rk, Rdc, Htp, Wte, Rvk, Pdc, W, Mr1, Pa, NR, Mr2, Pt, NCRX, A1, Pmr, Ptp, NW, A2, CPM, Vo, CR, CF, CL, Stylus tip µm 2 µm Calibration function Dynamic Memory (internal) Store up to max results and max. 30 profiles Dimensions (L x W x H) of the Drive Unit mm 163 x 72 x 74 Dimensions (L x W x H) of the Evaluation Unit mm 190 x 140 x 75 Weight of the Drive Unit g ca. 900 Weight of the Evaluation Unit kg ca. 1 Measuring principle Stylus method Pick-up Inductive skid pick-up Measuring force N ca. 0,7 mn Measuring Stand ST-G Order no EUR 7.950, 9.950,

24 - 24 MILLIMAR. MADE FOR PRECISION The whole world of Dimensional Metrology from one source; Mahr. The Millimar range of products comprises of perfectly matched probes and evaluation units as well as highly precise mechanical components and customer solutions. Thus, for every measuring task in Length Metrology we have the solution, Millimar by Mahr! MILLIMAR C1200 Compact Amplifier The new generation of Display Units Digimatic 0 IP42 739, EUR Order no Functions: ON/OFF, mm/inch, Reversal of counting direction, Measuring range switching, (Enter tolerance limit values), PRESET (Enter a numerical value), Factor (adjustable), DATA (Data transmission) High resolution and high contrast TFT color display The display can be continuously inclined for the ideal field of vision Simple to operate Can be operated with batteries or from the main power supply The C 1200 is fully portable when battery powered Compact housing Can be mounted on a wall for stationary operation Product Display range Resolution Reading Order no. Digital Analog C1200 ± 5000 µm µm µm µm EUR ± 5000, ± 2000, ± 1000, ± 300, ± 100, ± 30, ± 10, ± 3 0,1 200, 100, 20, 10, 2, 0, , MILLIMAR P2004 M Inductive Probe The Standard Probe IP64 209, EUR With rotary stroke bearings High linearity over the total measuring range Excellent electromagnetic shielding (EMC) All probes can be easily converted from axial to radial by mounting a slip on cap Further standard probes are also available upon request, for example: probes with a compressed air (pneumatic) lifter or with vacuum retraction as well as larger measuring ranges Order no Product Measuring range Measuring force Repeability f w Hysteresis f u Order no. mm N µm µm EUR P2004 M ± 2 0,75 0,1 0, ,

25 + 25 MARVISION SM 150 / SM 160 Stereo-Zoom Microscope Inspection of workpieces on the shop floor or in quality control laboratory 750, EUR Order no High quality optics for light intensive and sharp 3D images Continuously variable magnification due to the adjustable zoom lens Focusing with an ergonomic hand wheel, mounted either side, ideal for either a left or right handed operator Prism head tilted to 45 and rotatable through 360 ; with the dioptric adjustment (54 76 mm) Integrated incident and transmitted illumination, continuously variable Illumination 12 V /15 W, incident and transmitted light is variable (only SM 150) Product Magnification Field of view Observation Optical Working max. height Order no. tube angle tube distance of test piece EUR SM 150 variable , 28 5 mm 45 Binocular 105 mm 75 mm SM 160 7x 45x , MARVISION SM 151 Stereo-Zoom Microscope incl. CamSet Powerful Stereo Microscope for documentation with first class optics 1.499, EUR Order no High quality optics for light intensive and sharp 3D images Continuously variable magnification due to the adjustable zoom lens Focusing with an ergonomic hand wheel, mounted either side, ideal for either a left or right handed operator Prism head tilted to 45 and rotatable through 360 ; with the dioptric adjustment (54 76 mm) Integrated incident and transmitted illumination, continuously variable Illumination 12 V /15 W, incident and transmitted light is variable Product Magnification Field of view Observation Optical Working max. height Order no. tube angle tube distance of test piece EUR SM 151 variable 7x 45x 28 5 mm 45 Trinocular 105 mm 75 mm ,

26 - 26 THE SECOND DIMENSION IN METROLOGY With MarVision Optical Measuring Instruments, Mahr offers you a quick and reliable solution to many different 2D measurement tasks from cutting tools and precision products for the manufacturing industry and medical technology to miniaturized electronic components. The extremely precise measuring instruments as well as efficient operating and evaluation units are the foundations to meeting your high demands. MARVISION QM 300 Video Workshop Measuring Microscope incl. M3-Software and Touchscreen-PC Direct comparision with the CAD contours , EUR Order no Telecentric fixed lens Integrated color camera LED ring light: dimmable LED transmitted light, dimmable Height adjustable measuring table Automatic edge detection Automatic measurement of all features of a component within the image field Easy program sequence due to on screen graphic guidance Automatic edge detection even with low constrast parts Operator prompts are available in various languages QM 300 Example of work pieces: M3-Software with Touchscreen-PC Similar to illustration depends upon the PC manufacturer) Operating and display unit M3-Software mit Touchscreen-PC 23 Touchscreen with keyboard and mouse Based on Windows 8; thus it is possible to install further software Operated via the Multi-Touch on the monitor or via mouse/keyboard Large video image Target / actual evaluation with tolerance data Protocol print out with company logo Represented graphically with dimensions Statistic (minimum, maximum, range, standard devision, 6-sigma etc.) DXF function compares the measurement with a CAD drawing Punched parts Gears Rubber seals / rings Product QM 300 Measuring range X/Y mm 32 x 24* Travel Z mm 30 Measuring system E 2 XY in µm µm 4,0+L/50 (L in mm) Camera system 5 Megapixel 3 Illumination: Incident light LED ring light Illumination: Transmitted light LED telecentric Dimensions H x B x T mm 618 x 196 x 325 Order no EUR ,-- * Further sizes (57 x 42 mm, 96 x 72 mm) are availbale upon request. Accessories for Microscopes see Dimensional Metrology catalog, Chapter 18

27 + 27 MARVISION MM 420 Workshop Measuring Microscope with image processing Simple but very powerful measuring functions MM 420 Applications: , EUR Order no M3-Software with Touchscreen-PC Similar to illustration depends upon the PC manufacturer) Measurement and evaluation functions (points, lines, circles, angles, distances, intersecting straight lines, etc.) by automatic edge detection e. g. with precision punched and bent components, plastic parts as well as circuit boards. Integrated color camera Zoom lens, optionally motorized LED ring light: 1 ring and 4 segments, individually switchable and dimmable LED transmitted light: dimmable Solid granite base Sturdy steel XY table, precision-mounted Quick and fine adjustment of axes Optical incremental measuring system for outstanding accuracy and reliability Laser pointer for position finding Operating and display unit M3-Software mit Touchscreen-PC 23 Touchscreen with keyboard and mouse Based on Windows 8; thus it is possible to install further software Operated via the Multi-Touch on the monitor or via mouse/keyboard Large video image Target / actual evaluation with tolerance data Protocol print out with company logo Represented graphically with dimensions Automatic edge detection, even on low-contrast parts Statistic (minimum, maximum, range, standard devision, 6-sigma etc.) Stiching (stiching of several single pictures (rectangle stiching, open stiching). Product MM 420 Objective Fixed Zoom Motorized Zoom Magnification mm select either 40x, 60x, 100x 0,7x - 4,5x 6,5:1 Measuring range X/Y mm 200 / 100 Travel Z mm 150 / (350 optional extensions) Size of table mm 370 x 210 Maximum table load kg 20 Measuring system built-in incremental scale Measuring system - resolution µm 0,001 Measuring system - E1 X/Y in µm 1,9 + (L/100) Measuring system - E2 XY in µm 2,9 + (L/100) Working distance ca. mm from (according to options) Maximum object height mm from 80 up to 280 (according to options) Illumination LED incident and transmitted light, adjustable Dimensions H x W x D mm 700 x 480 x x 650 x x 650 x 550 Order no EUR , , , Accessories for Microscopes see Dimensional Metrology catalog, Chapter 18

28 MarCal Millimar Digimar MarVision MarSurf MarSurf MarSurf MarSurf MarSurf MarForm MarForm Precimar Precimar Precimar MarShaft MarGear MarSolution MarSolution MarSolution Services Mahr GmbH Standort Esslingen Reutlinger Straße 48, Esslingen Tel , Fax by Mahr GmbH We reserve the right to make changes to our products, especially due to technical improvements and further developments. All illustrations and technical data are therefore without guarantee. All list prices are the recommended retail prices. The net prices are shown in j, they exclude Value Added Tax and are valid from until

29