4000 Series. Two-Piece Steel Surface Raceway Available Factory Prewired. Steel Raceway

Transcription

1 4000 Series Steel Raceway Two-Piece Steel Surface Raceway Available Factory Prewired A/V INTEGRATION COMMUNICATIONS PREWIRED SURGE FIBER OPTIC CAT5 Wireold 4000 Series Raceway is the work horse of surface raceway systes Series Raceway can be divided for ulti-service applications Series Raceway is ideal for applications requiring a large cable capacity dual service steel raceway. Coercial, institutional, and industrial applications all benefit fro the rigid steel construction and durable Ivory ScuffCoat finish of this raceway Series Raceway is also ideal for unicipalities that require either all steel construction or prohibit nonetallic cable anageent systes Series Raceway in a typical dor roo application. F E A T U R E S & B E N E F I T S n New 4075D Series Bridge Fittings. Provides ability to bridge over existing 4000, 2400, 700, and 500 Series Raceways. n New 4047 Faceplates. One-piece device bracket with overlapping cover design that hides bad cuts and unsightly seas where device plates abut raceway covers. n New Faceplates. Sae great features as the 4047 faceplates, but now available in a double-wide 4-gang version. n 4047 faceplates available with pre-pigtailed receptacle installed. 20A heavy duty coercial grade duplex receptacle with 12" [305] pigtailed pre-installed in the device bracket. Saves tie and labor. n FiberReady 2" [51] Fiber Optic Radius fittings. UL and cul verified and exceed the recoendations of TIA/EIA 569A. Available as full capacity fittings or inserts to be used for existing installations. n Large cross section area. Provides aple space for large wiring requireents. n Coplete line of fittings. Provides coplete wiring solution and allows for interconnection between raceway systes. n Gray baked enael and Ivory ScuffCoat finish. Durable ivory Scuffcoat finish akes a scratch resistant surface. n Feeder or header syste. Ideal for overhead, open spaces and under raised floor applications. n Pre-cut covers. For ounting devices on various centers without cutting the covers. Use with 4046, 4047, 4048, 4007, and 4049 Series device plates. n 4050 nonetallic device plates. Overlapping design offers an aesthetically pleasing way to cover seas. Available in gray or ivory. n Base and cover cutters. Manually operated cutters are lightweight and portable. Cutters offer labor savings for any size job and aintain a factory clean and square end cut. n Available prewired. Manufactured to specified job site lengths and ready to install. Jobs can be packaged by area, floor, or building and shipped per job site requireents. n Siple prewired ordering. Provide us with arked-up electrical drawings and electrical/counications specifications and shipents can begin within three to four weeks or less for ost jobs. n Dataco connectivity options. Accepts industry standard and proprietary devices fro a wide range of anufacturers to provide a sealess and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. n UL5 and ADA copliant. Raceway and fittings eet UL5 standards and can be installed in conforance with ADA requireents. n UL Listed ultioutlet asseblies. File E68073 Guide PVGT. Fittings: File E Guide RJPR. Meets Article 380 of NEC and eets Section of CEC. n culus Listed Surface Metal Raceway Syste. File E4376 Guide RJBT. Fittings: File E41751, Guide RJPR. Meets Article 386 of NEC and eets Section of CEC. Now copatible with A/V devices. ED531R26 Updated May 2010 For latest specs visit

2 4000 Series Raceway Syste Layout 4010DFO DA B 4017FO BX 4047RF 4047JX D 4047RH 5507RJ 4018FO NOTE: Illustration is for showing product applications only. Catalog No./Ite 4000 Series Raceway Ordering Inforation Description/Specifications Catalog No./Ite Description/Specifications V4000B-10 G4000B-10 [44] Base.050" galvanized steel Packed five 10' [3.050] lengths per carton. Base has two 9/32" [7.1] diaeter KOs on centers of approxiately 18" [457] throughout. V4000C " [775] Pre-Cut Cover. G4000C315 For ounting devices on 36" [915] centers with 4007, 4046, 4047, 4048, and 4050 Series plates.spacing will be 36 1/4" [] with V4000C G4000C V4000C075 G4000C075 V4000C135 G4000C135 Cover.040" [1.0] galvanized steel. Packed ten 5' [1.5] lengths per carton. 7.5" [191] Pre-Cut Cover For ounting devices on 12" [305] centers with 4007, 4046, 4047, 4048, and 4050 Series plates. Spacing will be 12 1/4" [311] with " [343] Pre-Cut Cover For ounting devices on 18" [457] centers with 4007, 4046, 4047, 4048, and 4050 Series plates. Spacing will be 18 1/4" [464] with V4000C " [496] Pre-Cut Cover G4000C195 For ounting devices on 24" [610] centers with 4007, 4046, 4047, 4048, and 4050 Series plates. Spacing will be 24 1/4" [616] with G4000D 1 17/32" [39] IWE-S GWE-S IWE-P GWE-P Divider.040" [1.0] galvanized steel. One side painted buff prier to provide identification of copartents.* Packed ten 5' [1.5] lengths (50' [15.2]) per carton. *4001DA Divider Clips are required to hold divider in place. Spray Paint Used for touching up large areas. Contains 12 oz. of paint. NOTE: Can only be shipped via ground transportation. Touch-Up Paint Pen Used for touching up sall areas. Contains 0.3 oz. of paint. 2

3 Catalog No./Ite 4000 Series Raceway Fittings Ordering Inforation Description/Specifications Catalog No./Ite Description/Specifications G4000WC 4001A 1 1/2" [38] 4011DRI 4015DRI 4011/15RI 2 1/2" [64] Wire Clip (Plated) For holding conductors in place. 1" [25] Coupling (Galvanized Steel Plated) For joining lengths of G4000B. Sold in pairs. 2" [51] Radius Insert for Divided Flat Elbow Insert for V/G4011 Flat Elbow that provides a 2" [51] bend radius for UTP/STP or fiber optic cable installations. 2" [51] Radius Insert for Divided Tee Insert for V/G4015D Divided Tee that provides a 2" [51] bend radius for UTP/STP or fiber optic cable installations. 2" [51] Radius Corner Insert Insert for V/G4015 Undivided Tee that provides a 2" [51] bend radius for UTP/STP or fiber optic cable installations. V4010DFO Divided Entrance End Fitting G4010DFO Has concentric 3/4", 1", and 2 3/4" 1 1/4" trade size KOs on end [70] and botto for feeding 4000 Raceway. Furnished with reovable divider and 1 1/4" [32] bend radius 5 1/4" [133] controlled insert. V4011FO G4011FO [44] V4011 G4011 [44] 6 1/2" [165] FiberReady 2" [51] Radius Full Capacity Flat Elbow A 90 flat corner for divided and undivided applications for new lay-in 8 3/4" or pull-through installations. [222] Flat Elbow For right angle turns on the sae surface. V4012TX 1 1/8" 1 1/2" Internal or External 45 [29] [38] G4012TX Elbow Can also be assebled as an inverted 45 elbow. Assebled as internal elbow. 4017/18RI 2" [51] Radius Insert for Internal/External Elbows Insert for V/G4017 Internal Elbow and for V/G4018 External Elbow that provides a 2" [51] bend radius for UTP/STP or fiber optic cable installations. 1" 4001DA [25] Divider Clip (Plated) 1 1/2" [38] V4010B 1 1/4" G4010B [32] 4 1/2" [114] Required for holding G4000D Divider in place. Use one every 2 1/2' [0.762]. Blank End For closing open end of 4000 Base. Has two 1/2" trade size KOs. 12" V4014A [305] Wall Box Connector Base G4014A has two concentric 1/2", 3/4", 1", and 1 1/4" trade size KOs, and two rectangular 2 9/16" x 1 11/16" [65 x 43] KOs. V4015 G4015 V4015D G4015D 10" [254] 10" [254] 12" [305] 12" [305] Full Capacity Tee For undivided raceway only. Join to raceway run with G4001 Couplings (not furnished). Divided Tee For divided raceway only. Join to raceway run with G4001 Couplings (not furnished). V4010DFC G4010DFC 2 3/4" [70] 6" [152] Full Capacity Entrance End Fitting Full Capacity Entrance End Fitting for V/G4000 Raceway. Includes four 1" and 1 1/4" concentric trade size knockouts. Requires 4001A Coupling (sold separately). V4015FO FiberReady 2" [51] G4015FO Radius Full Capacity Tee A full capacity undivided [44] 12 3/4" [324] 9" [229] tee fitting. For new lay-in or pull-through installations. 3

4 Catalog No./Ite 4000 Series Raceway Fittings Ordering Inforation (continued) Description/Specifications Catalog No./Ite Description/Specifications V4015DFO FiberReady 2" [51] G4015DFO Radius Full Capacity Tee A full capacity divided tee [44] 9" fitting. For new lay-in or pull-through installations. 12 3/4" [229] [324] V4017FO G4017FO [44] 3 3/4" FiberReady 2" [51] [95] Radius Full Capacity Internal Elbow Full capacity 90 internal corner for divided or undivided applications. For new installations. 3 1/8" V4017 [79] Internal Elbow For 90 G4017 internal corners. Fiber 1 1/2" bushing included. [38] G4017TCA V4075D G4075D 4 13/16" [122] V4075DA G4075DA 3 9/16" [90] 8 1/8" [206] 3 9/16" [90] 8 1/8" [206] Internal Corner Coupling (Plated) For aking an internal corner while continuing a straight run. May be used with or without divider. A 4010B Blank End Fitting is required for an internal elbow. Fiber Bushing included. Bridge Fitting Allows 4000 Series Raceway to bridge over existing 4000 Series Raceway installations. [44] Bridge Fitting Allows 4000 Series Raceway to bridge over existing 2400, 700, or 500 Series Raceway installations. V4017N 1 1/4" Inverted Internal Elbow G4017N [32] For connecting a vertical run of 4000 Raceway with a horizontal overhead run with its cover facing up. V4018FO G4018FO 3 3/4" [95] 4 21/32" [118] 2 1/4" [57] FiberReady 2" [51] Radius Full Capacity External Elbow Use in divided or undivided applications. For new lay-in or pull-through installations. * Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version Agency approved for sale in Canada.c Catalog No./Ite 640B 4000 Series Raceway Cutters Description/Specifications Base Cutter Portable base cutter. Steel constructed provides clean and easy square cuts. Manual operation required. 640BDK Replaceent Blade Kit Replaceent blade and die set for 640B Cutter. V /16" [119] External Elbow For 90 G4018 external corners. 640C Cover Cutter Portable cover cutter. Steel constructed provides clean and easy square cuts. Manual operation required. 4 1/8" [105] 640CDK Replaceent Blade Kit Replaceent blade and die set for 640C Cutter. G4074A 4 7/8" [124] [242] 1 5/8" [41] Take-Off Connector (4000 to 3000) For connecting a 90 tee at any point along a run of 4000 Raceway. G4086A 7/32" [5.6] 5 5/32" [131] 1 1/2" [38] Panel Connector For connecting 4000 Raceway with surface type panel boxes. Accoodates axiu wire capacity of 4000 Syste. C-shaped flange covers uneven cuts to the box. New 4047 Faceplates accoodate a wide range of power and counications applications. 4

5 Catalog No./Ite Description/Specifications V4047AX G4047AX Single Round Opening For straight blade and locking single receptacles with face diaeters of 1.38" to 1.39" [35 to 36] Series Cover Plates Ordering Inforation Catalog No./Ite V4047C-1 G4047C-1 Description/Specifications One-Gang Overlapping Device Plate Use with coercially available single-gang flush plate (sold separately). V4047BX G4047BX Duplex Receptacle For 15A and 20A duplex receptacles. Accepts 106 Counications Duplex Frae. V4047C-2 G4047C-2 Two-Gang Overlapping Device Plate Use with coercially available two-gang flush plate (sold separately). V4047BB G4047BB Two Duplex Receptacles For 15A and 20A duplex receptacles. Accepts 106 Counications Duplex Frae. V4047BF G4047BF Duplex & Modular Furniture For 15A and 20A duplex receptacles. Includes cobination Modular Furniture and two Keystone twistouts. Accepts odular furniture adapter, 106 Counications Duplex Frae or RJ45. V4047JX G4047JX Single Round Opening For straight blade and single V4047RX G4047RX locking receptacles with face diaeters or 1.56" 1.58" [39 40]. Rectangle Opening For rectangular GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates. V4047BM G4047BM Duplex & 2A Mini adapter For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts 106 Counications Duplex Frae, Activate inserts & Wireold Open Syste Counication Modules. V4047BS G4047BS Duplex & Series II Mini Adapter For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts 106 Counications Duplex Frae or one Ortronics Series II Counications Insert. V4047BT G4047BT Duplex & TracJack Mini Adapter For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts 106 Counications Duplex Frae or two Ortronics TracJack Counications Inserts. 5 V4047RF G4047RF V4047WX G4047WX V4047WF G4047WF NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j Rectangle Opening & Modular Furniture For rectangular GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates. Accepts odular furniture adapter and RJ45. with One Duplex Receptacle Installed Includes one Pass & Seyour Duplex Receptacle with 12" wire leads installed on bracket. with One Duplex Installed & Modular Furniture Opening Includes one Pass & Seyour 20 A Duplex Receptacle with 12" wire leads installed on bracket. Includes cobination Modular Furniture and 2 Keystone Twist Out. Accepts odular furniture adapter and RJ45.

6 Catalog No./Ite 4047 Series Cover Plates Ordering Inforation (continued) Description/Specifications Catalog No./Ite Description/Specifications V4047WM G4047WM V4047WS G4047WS V4047WT G4047WT V4047-2BBBB G4047-2BBBB V4047-2BBFF G4047-2BBFF with One Duplex Installed & Activate Mini adapter Includes one Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts Activate inserts & Wireold Open Syste Counication Modules. with One Duplex Installed & Series II Mini adapter Includes one Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts one Ortronics Series II Counications insert. with One Duplex Installed & TracJack Mini adapter Includes one Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter.accepts two Ortronics TracJack Counications inserts. Four Duplex Openings For 15A and 20A duplex receptacles. Accepts 106 Counication Duplex Frae. Two Duplex & Two Modular Furniture Openings For 15A and 20A duplex receptacles. Includes cobination Modular Furniture & two Keystone Twistouts. Accepts 106 Counication Duplex Frae, RJ45 or odular furniture adapter. V4047-2BBTT G4047-2BBTT V4047-2BBXX G4047-2BBXX V4047-2RRXX G4047-2RRXX V4047-2WWFF G4047-2WWFF V4047-2WWMM G4047-2WWMM Two Duplex & Two TracJack Mini Adapters For 15A and 20A duplex receptacles. Includes Mini adapter.accepts 106 Counication Duplex Frae or two Ortronics TracJack Counications inserts. with Two Duplex Openings For 15A and 20A duplex receptacles. Accepts 106 Counication Duplex Frae. Two Rectangular Openings For rectangular, GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates. Two Duplex Installed & Two Modular Furniture Openings Includes two, Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. Includes cobination Modular Furniture & four keystone Twistouts. Accepts odular furniture adapter or RJ45. with Two Duplex Installed & Two Activate Mini Adapters Includes two Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts two Activate inserts & Wireold Open Syste Counication Modules. V4047-2BBMM G4047-2BBMM V4047-2BBSS G4047-2BBSS Two Duplex & Two Activate Mini Adapters For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts 106 Counication Duplex Frae, Activate inserts & Wireold Open Syste Counications Modules. Two Duplex & Two Series II Mini Adapters For 15A and 20A duplex receptacles. Includes Mini adapter.accepts 106 Counication Duplex Frae or one Ortronics Series II Counication insert. V4047-2WWSS G4047-2WWSS with Two Duplex Installed & Two Series II Mini Adapters Includes two Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. Includes Mini adapter.accepts two Ortronics Series II Counication inserts NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j 6

7 Catalog No./Ite 4047 Series Cover Plates Ordering Inforation (continued) Description/Specifications Catalog No./Ite Description/Specifications V4047-2WWTT G4047-2WWTT V4047-2WWXX G4047-2WWXX with Two Duplex Installed & Two TracJack Mini Adapters Includes two Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts four Ortronics TracJack Counications inserts. with Two Duplex Receptacles Installed Includes two Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. V4047UX Bup-Up Extron MAAP G4047UX Device Plate Accepts four Extron Electronics MAAP single space odules. V4047VX Bup-Up Extron AAP G4047VX Device Plate Accepts two Extron Electronics AAP single space odules. NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j 1. For X, Choose one of the following options: 2. Choose a Plate Configuration: 4047 Series Configurable Cover Plates Nuber Logic Two-Gang Plate: X Y Y V Ivory & UL Listed G Gray & UL Listed Four-Gang Plate: X Y Y Y Y CV Ivory & culus Listed (Canada only) CG Gray & culus Listed (Canada only) For Y, Choose any cobination of configurations fro the options listed below: A. 1.41" [35.8] Diaeter, Single Round Receptacle J. 1.59" [40] Diaeter, Single Round Receptacle T. Ortronics TracJack 2A Mini Adapter Adapter Opening with Adapter B. F. Duplex Receptacle Opening Cobination Modular Furniture & 2 Keystone Twist Out M. R. Pass & Seyour Activate 2A Mini adapter Opening with Adapter Rectangular Receptacle W. X. Pass & Seyour Light Alond 20 Ap Receptacle pre-pigtailed with 12" wire leads installed on Bracket Blank H. Mouse Hole Twist Out & Groet S. Ortronics Series II 2A Mini adapter Opening with Adapter Z. 3 Keystone Twist Out 4. Finished Part Nuber NOTE: For additional colors or configurations, call , option 2. 7

8 Catalog No./Ite 4000 Series Raceway Faceplates Ordering Inforation Description/Specifications Catalog No./Ite Description/Specifications V4046H-2 G4046H-2 Tap-Off Fitting Has four concentric 1/2" and 3/4" trade size KOs. V6007C-2 Two-Gang Device Plate G6007C-2 3 7/8" For installing two-gang [98] devices or two vertically ounted single-gang devices on undivided raceway. 2 7/8" [73] Accepts coercially available wall plate (not furnished). V6007C-1 Single-Gang Device Cover G6007C-1 For vertical ounting of single-gang devices on undivided raceway. 2 1/2" Accepts coercially available [64] wall plate. (sold separately) 4 5/16" [110] NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j 2 7/8" [73] 1 7/8" [48] Catalog No./Ite Counication Endplates Ordering Inforation Description/Specifications Catalog No./Ite Description/Specifications ARA-S2 CM-ARA Angled Raceway Adapter For use with ulti-channel raceway device brackets and WallSource device ounting brackets. Angled exit provides additional ounting depth required for A/V connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two Ortronics Series II odules.fits 5507 Series Faceplate opening. Angled Raceway Adapter For use with ulti-channel raceway device brackets and WallSource device ounting brackets. Angled exit provides additional ounting depth required for A/V connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two CM2 Series odules or two Pass & Seyour 2A inserts. Fits 5507 Series Faceplate opening. CM-EPLA* S2-EPL* End Plates Includes two outlet identification labels with clear covers and two atching screw covers. Required for ounting Pass & Seyour Activate and Wireold Open Syste counication odules into 4050 Series device brackets. End Plates Includes two outlet identification labels with clear covers and two atching screw covers. Required for ounting Ortronics Series II odules into 4050 Series device brackets. 8

9 Catalog No./Ite V/G4050 & 5507 Series Faceplates Ordering Inforation Description/Specifications Catalog No./Ite Description/Specifications V4050* Device Mounting Bracket G4050* 4 11/16" 6" High ipact plastic ounting [119] [152] bracket and tri plate which overlap raceway cover providing a sealess transition. For use with 5507 Series Faceplates, Ortronics TracJack &Series II Modules, Pass & Seyour Activate Series Inserts, and Wireold Open Syste 7/16" [11.1] Counication Modules. 5507AD* Modular Furniture Adapter For ounting Pass & Seyour Activate odular furniture adapter and other odular furniture adapters. 5507B* Blank Faceplate For covering unused copartents in the device bracket. 5507D* Duplex Faceplate For covering duplex style devices. Accepts 106 Counication Duplex Frae. 5507T1* Single Receptacle Faceplate For covering single receptacles 1.59" [40.4] diaeter. 5507T2* Single Receptacle Faceplate For covering single receptacles 1.41" [35.8] diaeter. 5507RJ* Dual RJ11/RJ45 Connector Faceplate For ounting one or two RJ type keystone connectors has one opening and a KO for the other. 5507FRJ* Flush Dual RJ11/RJ45 Faceplate Sae as 5507RJ except the connectors are recessed to provide a flush installation. 5507AAP Extron AAP Faceplate Accepts two Extron Electronics AAP single space odules. 5507R* Rectangular Faceplate For covering rectangular style devices. 5507S* Rectangular Spacer For ounting coercial device plates. Installs between the device bracket and a device. 5507SW* Switch Faceplate For covering standard toggle switches. 5507MAAP Extron MAAP Faceplate Accepts two Extron Electronics MAAP single space odules TJ* Ortronics Faceplate For ounting Ortronics counication inserts. Accepts four TracJack Devices. NOTE: All faceplates are 4 1/4" long x 1 11/16" wide [108 x 43]. * Add G suffix to indicate gray finish. Not for use with 4048BF and 4048RF Device Covers TJ* Ortronics Faceplate For ounting Ortronics counication inserts. Accepts six TracJack Devices. 9

10 4000 Series Prewired Steel Raceway Features FEATURES STANDARD OPTIONS Counication Devices Ortronics or Pass & Seyour Other anufacturers Activate Connectivity Syste Devices Electrical Devices Pass & Seyour Other anufacturers and soe In ter na tion al devices Base Length Longest = 10' [2.54], shortest = 1' [305] Installation Surface ounted Finish Baked enael finish Standard colors of baked powder epoxy or custo colors Wire Type THHN stranded Options per specification Wiring Splices Insulation displaceent connectors Continuous wiring or twist-on wire connector Grounding Conductors Wire gauge per National Electrical Oversized and/or separate grounding wires Code (NEC) and shared grounding wires Device Identification Gray self-adhesive polyester label Self-adhesive engraved naeplate with black letters Neutrals Shared neutral Oversized and/or separate neutral wires Pigtails 12" [305] feeds and receptacle leads Per specification Conduit Feeds Raceway drilled at job site Entrance end cap Device Mounting Nonetallic plates Steel plates Record Drawings 3 sets and 2 copies of arked-up blueprints Per job requireents Subittal Services Detailed subittal Subittal free Device and Raceway Labeling Detail for Prewired Applications n Device labeling is available in the following aterials: Gray self-adhesive polyester label with black lettering (stan dard). Other color self-adhesive polyester labels. Engraved phenolic naeplates with adhesive back ing. n The back of the raceway is labeled with the raceway nuber and the roo or area nuber(s). Label Window Labeling detail using the steel device plates. Labeling detail using the nonetallic 4050 Device Plates. (Shown with Pass & Seyour Activate connectivity inserts) Series Ordering Specifications for Prewired Applications Two options available when ordering a prewired job: 1. Detailed Subittal The detailed subittal will show exactly how each raceway run will be built including lengths, nuber and type of receptacles, wiring scheatics, circuiting inforation, etc. The contractor and/or distributor ust review, clarify any inforation not clearly indicated on the drawings or specs, approve, and return to the factory before production can begin. 2. Subittal Free The Prewired Express Building Plan Checklist is filled out by the contractor or distributor and sent along with plans, casework, and specs to the factory. No subittal is required and the project is scheduled for production upon receipt of all necessary inforation. 10

11 4000 Series Raceway Wire Fill Capacity Charts 4000 Series Raceway Wire Fill Capacities for Power NUMBER OF CONDUCTORS (40% FILL) WITH DUPLEX WITH SURGE/ LARGE SINGLE WIRE SIZE O.D. WITHOUT DEVICES RECT. DEVICES GFCI DEVICES RECEPTACLES THHN/THWN Inches [] 1.59 IN 2 [ ] 2.30 IN 2 [ ] 3.00 IN 2 [ ] UNDIV. DIVIDED UNDIV. DIVIDED UNDIV. DIVIDED UNDIV. DIVIDED 14 AWG [2.8] AWG [3.3] AWG [4.2] AWG [5.5] AWG [6.5] AWG [8.2] AWG [8.9] AWG [9.8] * For additional inforation, refer to section T1 of the current version of catalog ED1560 (Product Guide) 4000 Series Raceway Wire Fill Capacities for Counications O.D. DIVIDED UNDIVIDED CABLE/WIRE SIZE Inches [] 40% FILL* 40% FILL* UNSHIELDED 4-pair, 24 AWG, Cat [4.8] TWISTED PAIR 4-pair, 24 AWG, Cat 5e [5.3] pair, 24 AWG, Cat [6.3] pair, 24 AWG, Cat 6a* [3.6] pair, 24 AWG [10.4] COAXIAL RG6/U [6.9] FIBER ZipCord x [3 x 6] Round 4 Strand Fiber [4.8] Round 6 Strand Fiber [6.5] * Category 6 augented (6a) cable for 10 gigabit ethernet ax allowed cable diaeter per addenda No. 11 ANSI TIA/EIA 568-B Raceway Wire Fill Capacities When Using 4000 Radius Inserts 4011 FLAT ELBOW 4017 & 4018 ELBOWS 4015D & 4015 TEE FITTINGS O.D. 40% FILL 40% FILL 40% FILL 4011DRI 4011/4015RI 4017/18RI 4017/18RI 4015DRI 4011/15RI CABLE/WIRE SIZE Inches [] Divided Undivided Divided Undivided Divided Undivided POWER WIRING 2 AWG [9.8] THHN/THWN 4 AWG [8.2] AWG [6.5] AWG [5.5] AWG [4.2] AWG [3.3] AWG [2.8] UNSHIELDED Cat. 3 UTP [4.8] TWISTED PAIR Cat. 5e UTP [5.3] Cat. 6 UTP [6.3] Cat. 6a UTP [9.0] pair [10.4] COAXIAL RG6/U [6.9] FIBER OPTIC Fiber ZipCord x [3 x 6] Round Fiber 4 Strand [4.8] Round Fiber 6 Strand [6.5]

12 DATACOM CONNECTIVITY OPTIONS Now you have a wide range of options for providing dataco connectivity into Wireold/Legrand Pathways. They are: Ortronics TracJack and Series II Modular Connectivity Solutions Pass & Seyour Activate Modular Inserts Open Syste Counication Modules Ortronics Connectivity TracJack Individual Jack Syste Front-loading, snap-in design supports future oves adds and changes Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other edia Flat or angled 45 exit configurations Choice of 13 colors and color atched to Wireold Systes Universal T568A/B wiring forat Series II Front-Loading, Module Syste Module design features easy snap-in front-loading design Linear 110 punch down forat for easy terination Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other edia Available in flat or angled 45 exit configurations Color atched to Wireold Systes For detailed product selection refer to the Ortronics Catalog or visit Pass & Seyour Legrand Network Wiring Activate Series Front-Loading Inserts Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture atched to Wireold Systes Available Category 3, 5e, 6, as well as 6-position USOC Universal T568A/B wiring forat For detailed product selection refer to the Pass & Seyour Network Wiring Catalog or visit Open Connectivity Solutions Wireold Open Syste Counications Modules Accoodate a wide range of anufacturers counications outlets including keystone jacks, as well as proprietary solutions fro Avaya (Systiax) and NORDX Modules insert into a wide range of Wireold Systes Pre-punched faceplates accept coon counication devices NOTE: For ore inforation on integrating connectivity into Wireold Cable Manageent Systes contact the Wireold Applications Engineering Tea or your local Wireold Sales Representative. WIREMOLD U.S. and International: 60 Woodlawn Street West Hartford, CT FAX Outside U.S Canada: 570 Applewood Crescent Vaughan, Ontario L4K 4B FAX Copyright 2010 Legrand/Wireold All Rights Reserved ED531R26 - Updated May For latest specs visit