WIREMOLD. Two-Piece Steel Surface Raceway. Steel Raceway

Transcription

1 WIREMOLD Steel Raceway Two-Piece Steel Surface Raceway 6000 Series Raceway can be used divided for separate wiring circuits or ulti-service applications. For large cabling installations, 6000 can be used undivided as headers and feeders or to bring wiring to a specified location Series Raceway is ideal for all applications requiring a high cable capacity, dual service steel raceway. Coercial, institutional, and industrial applications all benefit fro the 6000 Series rigid steel construction and durable Ivory ScuffCoat finish Series Raceway is also ideal for unicipalities that require either all steel construction or prohibit nonetallic cable anageent systes Series Raceway shown as a divided syste with Activate inserts and power device with a 4050 device bracket. F E A T U R E S & B E N E F I T S n Steel raceway. Provides superior strength for any dry interior location installation. n Extra large cross sectional area. Provides space for large wiring requireents or installations that use large diaeter cable for power and/or data/counications. n Dividable raceway base. Snap-in divider creates twocopartent raceway. For bringing large aounts of power and data/counications cable to one location. n Coplete line of fittings. Provides coplete wiring solution and allows for interconnection between raceway systes. n Gray baked enael and Ivory ScuffCoat finish. Enael finish assures durability; can be easily overpainted. Durable Ivory Scuffcoat finish akes a scratch resistant surface. n Installs as a feeder or header raceway. Ideal for overhead, open spaces and underfloor applications. n Accoodates large size devices. Large size raceway accepts single- and dual-gang devices up to 100 aps and circuit breakers up to three pole. n Pre-cut covers for standard outlet center locations. For ounting devices on various centers without cutting the covers which reduces nuber of field cuts for labor savings. n Base and cover cutters. Manually operated cutters are lightweight and portable. Cutters offer labor savings for any size job and aintain a factory clean and square cut. n Counication connectivity options. Accepts industry standard and proprietary devices fro a wide range of anufacturers to provide a sealess and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. n ADA copliant. Raceway and fittings can be installed in conforance with ADA requireents. n UL Listed and CSA Certified. Raceway UL file E4376 Guide RJBT, CSA file LR350. Fittings UL file Guide RJPR, CSA file 350 and Now copatible with A/V devices Series Faceplates accoodate a wide range of power and counications applications. ED530R15 Updated June 2013 For latest specs visit

2 G6046KD G6017TX G6014A 6000 Series Raceway Syste Layout G6007C-1 G6017TX G6007C-2 G6011TX G6010B G4050 NOTE: Illustration is for showing single service product application only. Catalog No./Ite 6000 Series Raceway Ordering Inforation Catalog No./Ite V6000B-10 G6000B /16" [90] V6000C* G6000C* G6000DA** 3 1/4" [83] Base.060" [1.5] galvanized steel. Packed two 10' [3] lengths per carton. Base has two 9/32" diaeter trade size KOs 1 1/4" [32] fro each end and on centers of approxiately 18" [457] throughout. Cover 040" [1.0] galvanized steel. Packed four 5' [1.5] per carton. Divider.040" [1.0] galvanized steel. One side painted buff prier to provide identification of copartents. Packed four 5' [1.5] lengths per carton. 660B Base Cutter Portable base cutter. Steel constructed provides clean and easy square cuts. Manual operation required. 660BDK Replaceent Blade Kit Replaceent blade and die set for 640B Cutter. 640C Cover Cutter Portable cover cutter. Steel constructed provides clean and easy square cuts. Manual operation required. 640CDK Replaceent Blade Kit Replaceent blade and die set for 640C Cutter. IWE-S GWE-S Spray Paint Used for touching up large areas. Contains 12 oz. of paint. NOTE: Can only be shipped via ground transportation. * 4000C and 6000C are copatible with 4000B and 6000B Raceway. ** G6001DA Divider Clips are required to hold divider in place. IWE-P GWE-P Touch-Up Paint Pen Used for touching up sall areas. Contains 0.3 oz. of paint. 2

3 Catalog No./Ite 6001A 3 5/16" [84] 2 1/2" [64] 6000 Series Raceway Fittings Ordering Inforation Coupling For joining lengths of 6000B. Catalog No./Ite V6006 G /4" [44] Connection Cover Use where two sections of 4000 or 6000 Series Raceway Cover, not squarely cut, 1" [25] coe together. G6000WC 1 1/2" [38] Wire Clip For holding conductors in place. Use only with undivided 6000 Series Raceway. V6010B G6010B 1 1/2" [38] Blank End Fitting For closing open end of 6000 Series Raceway. G6001DA 3" [76] 2 7/8" [73] 2 3/8" [60] Divider Clip For holding G6000DA Divider in place to divide raceway into 1/3, 1/2, or 2/3 copartents Raceway divided into 1/3 copartents will not accept devices. V6011TX G6011TX Cobination Flat Elbow For using as a flat elbow, tee, or cross, (one 6001TX required for tee; two for cross; not included). G6001TX 3" [76] G6008A 7 7/8" [200] 6 7/8" [175] Converter Coupling For converting 6011TX or 6017TX into a tee or cross. For tee, one required; for cross, two required. C-Hanger For suspending 6000 or 4000 Raceway fro structural ceiling. Designed for use with 3/8" [9.5] rod. Hangers should be installed no ore than 5' [1.525] apart along raceway run. Can be bolted back-toback for dual runs of 4000, 6000, or to a G3008C for cobined runs with 3000 Raceway. V4000C075/ Pre-Cut Cover 7.5" [191] G4000C075* For ounting devices on 12" [305] centers with 4047 Series Cover Plates. V6012TX Internal or External 45 Elbow G6012TX 2 1/2" [64] 4 1/4" [108] For aking internal or external 45 turns in a run of 6000 Series Raceway. Can also be assebled as an inverted 45 elbow. V6014A Connector Fitting Has 1 1/4", 1 1/2" G6014A and 2" [32, 38 and 51] trade 12" [305] size KOs in back and on each side. V4000C135/ Pre-Cut Cover 13.5" [345] G4000C135 For ounting devices on 18" [457] centers with 4047 Series Cover Plates. V4000C195/ Pre-Cut Cover 19.5" [495] G4000C195 For ounting devices on 24" [610] centers with 4047 Series Cover Plates. V4000C315/ Pre-Cut Cover 31.5" [800] G4000C315 For ounting devices on 36" [915] centers with 4047 Series Cover Plates. V6017TX 3 1/2" Cobination Internal/External 90 G6017TX [89] Elbow For use as internal or external elbow, straight-through fitting, tee, or cross (one G6001TX required for tee or straight through fitting; two for cross; not included). V6046KD G6046KD Circuit Breaker Housing KOs in cover can be reoved for installation of three single-pole breakers. For use 2 3/8" with the following breakers rated [60] 100A axiu. MANUFACTURER SERIES 4 9/16" [116] General Electric Westinghouse THQC, THHQC Quicklag, C, QCH * 4000C and 6000C are copatible with 4000B and 6000B Raceway. G6001DA Divider Clips are required to hold divider in place. 3

4 Catalog No./Ite 6000 Series Raceway Fittings Ordering Inforation (continued) Catalog No./Ite V6074 Take-Off Connector (6000 to 6000) G6074 For 90 tee connection at any point along a run of /8" [124] 3 9/16" [90] V6074A Take-Off Connector (6000 to 4000) G6074A For 90 tee connection at any point along a run of V6086 G /4" [45] 5 3/16" [132] Panel Connector For connecting 6000 with surface type panel boxes. Accoodates axiu wire capacity of 6000 syste. Separate C-flange fits around raceway, covering uneven cuts to the box. Cut x 3 9/16" [121 x 90] hole in panel box. 4 7/8" [124] 3 9/16" [90] Catalog No./Ite V6007C-1 Single-Gang Device Cover G6007C-1 2 1/2" [64] 2 7/8" [73] 1 7/8" [48] 6000 Series Raceway Faceplates Ordering Inforation For vertical ounting single-gang devices on undivided raceway. Accepts coercially available wall plate (sold separately). Catalog No./Ite V6007C-2 Two-Gang Device Plate G6007C-2 3 7/8" [98] 2 7/8" [73] 4 5/16" [110] For installing two-gang devices or two vertically ounted single-gang devices on undivided raceway. Accepts coercially available wall plate (sold separately). Add C prefix to denote Canadian version Agency approved for sale in Canada.c 4

5 Catalog No./Ite V4047AX G4047AX Single Round Opening For straight blade and locking single receptacles with face diaeters of 1.38" to 1.39" [35 to 36]. V4047BX G4047BX Duplex Receptacle For 15A and 20A duplex receptacles. Accepts 106 Counications Duplex Frae. V4047BB G4047BB Two Duplex Receptacles For 15A and 20A duplex receptacles. Accepts 106 Counications Duplex Frae. V4047BF G4047BF Duplex & Modular Furniture For 15A and 20A duplex receptacles. Includes cobination Modular Furniture and two Keystone twistouts. Accepts odular furniture adapter. V4047BM G4047BM Duplex & 2A Mini adapter For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts Pass & Seyour Activate inserts & Wireold CM2 Series Open Syste Counication Modules. V4047BS G4047BS Duplex & Series II Mini Adapter For 15A and 20A duplex receptacles. Includes Mini adapter Series Cover Plates Ordering Inforation Accepts one Ortronics Series II Counication Insert. Catalog No./Ite V4047BT G4047BT Duplex & TracJack Mini Adapter For 15A and 20A duplex V4047C-1 G4047C-1 V4047C-2 G4047C-2 receptacles. Includes Mini adapter. Accepts two Ortronics TracJack Counication Inserts. One-Gang Overlapping Device Plate Use with coercially available single-gang flush plate (sold separately). Two-Gang Overlapping Device Plate Use with coercially available two-gang flush plate (sold separately). V4047JX G4047JX Single Round Opening For straight blade and single V4047RX G4047RX V4047RF G4047RF locking receptacles with face diaeters or 1.56" 1.58" [39 40]. Rectangle Opening For rectangular GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates. Rectangle Opening & Modular Furniture For rectangular GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates. Accepts odular furniture adapter and keystone RJ45 jacks. NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j 5

6 Catalog No./Ite 4047 Series Cover Plates Ordering Inforation (continued) Catalog No./Ite V4047WX G4047WX V4047WF G4047WF with One Duplex Receptacle Installed Includes one Pass & Seyour Duplex Receptacle with 12" wire leads installed on bracket. with One Duplex Installed & Modular Furniture Opening Includes one Pass & Seyour 20 A Duplex Receptacle with 12" wire leads installed on bracket. Includes cobination Modular Furniture and 2 Keystone Twist Out. Accepts odular furniture adapter and keystone RJ45 jacks. V4047-2BBFF G4047-2BBFF V4047-2BBMM G4047-2BBMM Two Duplex & Two Modular Furniture Openings For 15A and 20A duplex receptacles. Includes cobination Modular Furniture & four Keystone Twistouts. Accepts keystone RJ45 or odular furniture adapter. Two Duplex & Two Activate Mini Adapters For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts Activate inserts & Wireold CM2 Series Open Syste Counications Modules. V4047WM G4047WM V4047WS G4047WS V4047WT G4047WT V4047-2BBBB G4047-2BBBB with One Duplex Installed & Activate Mini adapter Includes one Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts Activate inserts & Wireold CM2 Series Open Syste Counication Modules. with One Duplex Installed & Series II Mini adapter Includes one Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts one Ortronics Series II Counications insert. with One Duplex Installed & TracJack Mini adapter Includes one Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter.accepts two Ortronics TracJack Counications inserts. Four Duplex Openings For 15A and 20A duplex receptacles. Accepts 106 Counication Duplex Frae. V4047-2BBSS G4047-2BBSS V4047-2BBTT G4047-2BBTT V4047-2BBXX G4047-2BBXX V4047-2RRXX G4047-2RRXX Two Duplex & Two Series II Mini Adapters For 15A and 20A duplex receptacles. Includes Mini adapter.accepts two Ortronics Series II Counication inserts. Two Duplex & Two TracJack Mini Adapters For 15A and 20A duplex receptacles. Includes Mini adapter.accepts four Ortronics TracJack Counications inserts. with Two Duplex Openings For 15A and 20A duplex receptacles. Accepts 106 Counication Duplex Frae. Two Rectangular Openings For rectangular, GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates. NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j 6

7 Catalog No./Ite 4047 Series Cover Plates Ordering Inforation (continued) Catalog No./Ite V4047-2WWFF G4047-2WWFF Two Duplex Installed & Two Modular Furniture Openings Includes two, Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. Includes cobination Modular Furniture & four keystone Twistouts. Accepts odular furniture adapter or RJ45. V4047-2WWTT G4047-2WWTT with Two Duplex Installed & Two TracJack Mini Adapters Includes two Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts four Ortronics TracJack Counications inserts. V4047-2WWMM G4047-2WWMM V4047-2WWSS G4047-2WWSS with Two Duplex Installed & Two Activate Mini Adapters Includes two Pass & Seyour 20A Duplex Receptacle with 12" wire leads installed on Bracket. Includes Mini adapter. Accepts two Activate inserts & Wireold CM2 Series Open Syste Counication Modules. with Two Duplex Installed & Two Series II Mini Adapters Includes two Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. Includes Mini adapter.accepts two Ortronics Series II Counication inserts. NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j V4047-2WWXX G4047-2WWXX with Two Duplex Receptacles Installed Includes two Pass & Seyour 20A Duplex Receptacles with 12" wire leads installed on Bracket. V4047UX Bup-Up Extron MAAP G4047UX Device Plate Accepts four Extron Electronics 4 3/16" MAAP single space odules. [122] 7 5/16" [185] V4047VX Bup-Up Extron AAP G4047VX Device Plate 4 3/16" [122] 7 5/16" [185] 1 13/32" [36] Accepts two Extron Electronics AAP single space odules. 1 13/32" [36] 1. For X, Choose one of the following options: 2. Choose a Plate Configuration: 4047 Series Configurable Cover Plates Nuber Logic Two-Gang Plate: X Y Y V Ivory & UL Listed G Gray & UL Listed Four-Gang Plate: X Y Y Y Y CV Ivory & culus Listed (Canada only) CG Gray & culus Listed (Canada only) For Y, Choose any cobination of configurations fro the options listed below: A. 1.41" [35.8] Diaeter, Single Round Receptacle J. 1.59" [40] Diaeter, Single Round Receptacle T. Ortronics TracJack 2A Mini Adapter Adapter Opening with Adapter B. F. Duplex Receptacle Opening Cobination Modular Furniture & 2 Keystone Twist Out M. R. Pass & Seyour Activate 2A Mini adapter Opening with Adapter Rectangular Receptacle W. X. Pass & Seyour Light Alond 20 Ap Receptacle pre-pigtailed with 12" wire leads installed on Bracket Blank H. Mouse Hole Twist Out & Groet S. Ortronics Series II 2A Mini adapter Opening with Adapter Z. 3 Keystone Twist Out 4. Finished Part Nuber NOTE: For additional colors or configurations, call , option 2. 7

8 Catalog No./Ite 4000 Series Faceplates Ordering Inforation Catalog No./Ite V4046H-2 G4046H-2 Tap-Off Fitting Has four concentric 1/2" and 3/4" trade size KOs. V6007C-2 Two-Gang Device Plate G6007C-2 For installing two-gang 3 7/8" devices or two vertically [98] ounted single-gang devices on undivided raceway. Accepts coercially 2 7/8" available wall plate [73] (not furnished). 2 1/2" V6007C-1 [64] Single-Gang Device Cover G6007C-1 For vertical ounting single-gang devices on undivided raceway. Accepts coercially available wall plate (sold separately). 2 7/8" [73] 4 5/16" [110] NOTE: Faceplates can also be used with 6000 Series Raceway. Add C prefix to denote Canadian version UL Listed to U.S. and Canadian Safety Standards. j 1 7/8" [48] Catalog No./Ite Counication Endplates Ordering Inforation Catalog No./Ite ARA-S2* CM-ARA* Angled Raceway Adapter For use with 4050 device brackets and WallSource device ounting brackets. Angled exit provides additional ounting depth required for A/V connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two Ortronics Series II odules.fits 5507 Series Faceplate opening. Angled Raceway Adapter For use with 4050 device brackets and WallSource device ounting brackets. Angled exit provides additional ounting depth required for A/V connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two Wireold CM2 Series Open Syste odules or two Pass & Seyour 2A inserts. Fits 5507 Series Faceplate opening. CM-EPLA* S2-EPL* End Plates Includes two outlet identification labels with clear covers and two atching screw covers. Required for ounting Pass & Seyour Activate and Wireold CM2 Series Open Syste counication odules into 4050 Series device brackets. End Plates Includes two outlet identification labels with clear covers and two atching screw covers. Required for ounting Ortronics Series II odules into 4050 Series device brackets. * Add G suffix to indicate gray finish. 8

9 Catalog No./Ite V/G4050 & 5507 Series Faceplates Ordering Inforation Catalog No./Ite V4050* Device Mounting Bracket G4050* 4 11/16" 6" High ipact plastic ounting [119] [152] bracket and tri plate which overlap raceway cover providing a sealess transition. For use with 5507 Series Faceplates, Ortronics TracJack &Series II Modules, Pass & Seyour Activate Series Inserts, and Wireold CM2 Series Open 7/16" [11.1] Syste Counication Modules. 5507AD* Modular Furniture Adapter For ounting odular furniture adapters. 5507RJ* Dual RJ11/RJ45 Connector Faceplate For ounting one or two RJ type keystone connectors has one opening and a KO for the other. 5507FRJ* Flush Dual RJ11/RJ45 Faceplate Sae as 5507RJ except the connectors are recessed to provide a flush installation. 5507AAP Extron AAP Faceplate Accepts two Extron Electronics AAP single space odules. 5507B* Blank Faceplate For covering unused copartents in the device bracket. 5507MAAP Extron MAAP Faceplate Accepts four Extron Electronics MAAP single space odules. 5507D* Duplex Faceplate For covering duplex style devices. Accepts 106 Counication Duplex Frae TJ* Ortronics Faceplate For ounting Ortronics counication inserts. Accepts four TracJack Devices. 5507R* Rectangular Faceplate For covering rectangular style devices. 5507S* Rectangular Spacer For ounting coercial device plates. Installs between the device bracket and a device TJ* Ortronics Faceplate For ounting Ortronics counication inserts. Accepts six TracJack Devices. 5507SW* Switch Faceplate For covering standard toggle switches. 5507T1* Single Receptacle Faceplate For covering single receptacles 1.59" [40.4] diaeter. 5507T2* Single Receptacle Faceplate For covering single receptacles 1.41" [35.8] diaeter. NOTE: All faceplates are 4 1/4" long x 1 11/16" wide [108 x 43]. * Add G suffix to indicate gray finish. Not for use with 4047BF and 4047RF Device Covers. 9

10 6000 Series Raceway Wire Fill Capacity Charts 6000 Raceway Wire Fill Capacity for Power NUMBER OF CONDUCTORS (40% FILL) WITH DUPLEX WITH SURGE/ LARGE SINGLE WIRE SIZE O.D. WITHOUT DEVICES RECT. DEVICES GFCI DEVICES RECEPTACLES THHN/THWN inches [] 1.59 in. 2 [ ] 2.30 in. 2 [ ] 3.00 in. 2 [ ] UNDIV. DIVIDED UNDIV. DIVIDED UNDIV. DIVIDED UNDIV. DIVIDED 14 AWG [2.8] AWG [3.3] AWG [4.2] AWG [5.5] AWG [6.5] AWG [8.2] AWG [8.9] AWG [9.8] AWG [11.3] /0 AWG [12.3] /0 AWG [13.5] NOTE: For additional inforation, refer to the Technical Section of ED1560 (Product Guide) Raceway Cable Fill Capacities for Data/Counications CABLE O.D. DIVIDED UNDIVIDED TYPE CATEGORY / DESIGNATION Inches [] 40% FILL 40% FILL UNSHIELDED 4-pair, 24 AWG Cat [4.8] TWISTED PAIR 4-pair, 24 AWG Cat 5e [5.3] pair, 24 AWG Cat [6.3] pair, 24 AWG Cat 6a* [9.0] pair, 24 AWG Cat [10.4] TELEPHONE 2-pair, 24 AWG [3.6] pair, 24 AWG [3.8] pair, 24 AWG [4.8] pair, 24 AWG [10.4] COAXIAL RG58/U [5.0] RG59/U [6.1] RG62/U [6.1] RG6/U [6.9] TWINAXIAL 100 Oh [8.4] SHIELDED TYPE [9.9] TWISTED PAIR TYPE [11.8] TYPE [6.2] FIBER Mini ZipCord x [2 x 4] ZipCord x [3 x 6] Round 4 Strand Fiber [4.8] Round 6 Strand Fiber [6.5] NOTE: Capacity range is calculated at 20% to 40% of raceway area as stated in a proposed revision to the Coercial Building Standard for Telecounication Pathways & Spaces, TIA/EIA-569. Actual wire fill capacity ay vary based on applications, cable types, and nuber, as well as type of fittings. (Fitting ay cause additional variances to the fill capacity.) * Category 6 augented (6a) cable for 10 gigabit ethernet ax allowed cable diaeter per addenda No. 11 ANSI TIA/EIA 568-B.2. 10

11 N OT E S 11

12 ED530R15 Updated June 2013 For latest specs visit Copyright 2013 Legrand All Rights Reserved Electrical Wiring Systes 60 Woodlawn Street West Hartford, CT Phone: BY.LEGRAND ( ) Applewood Crescent Vaughan, Ontario L4K 4B4 Phone: