Inclinometer. 4-20mA and RS232
|
|
|
- Cecily Floyd
- 6 years ago
- Views:
Transcription
1 Inclinometer 4-20mA and RS232 Real size Main Features - Two axis digital inclinometer n - Angle measurement range of +/-5, +/-15 and +/-30, Resolution up to Active linearization and temperaturecompensation - Current output : 4 20mA - RS232 output : ASCII - Housing : 70 mm Applications - Structural engineering - Levelling techniques - Measuring techniques - Inclinations - Mechanical Structure Programmable Parameters - Transmission mode: Polled Mode, Cyclic Mode - Cycle Time - Preset - Baud-rate KBaud Electrical Features - Linear and temperature compensated characteristic line - Microprocessor controlled - Polarity inversion protection - Over-voltage-peak protection - Highly integrated circuit in SMD-technology INC - version1.0 1
2 TECHNICAL DATA Electrical Data Model INC 5 INC 15 INC 30 Measuring range +/- 5 +/- 15 +/- 30 Resolution digital 0,001 0,001 0,01 Resolution analog 0,001 0,005 0,01 Accuracy (T = 0 C C) 0,01 0,01 0,02 Accuracy (T = -25 C C) 0,02 0,02 0,03 Inclination angle in x and y ** +/-15 +/-40 +/-60 Damping period 5 > 0 typical 1s 10%, 2s 1%, 3s 0.1% Digital interface Baud rate Analog interface RS232 format ASCII Max. 56 k 4 20mA, 0 =12mA (300Ohms) Supply voltage V DC (absolute limits) * Current consumption max. 50 ma (24 V DC) EMC EN , EN Electrical lifetime > 10 5 h * Supply voltage according to EN (safety extra-low voltage) ** Supply voltage is applied. Analog output Mechanical Data Housing Aluminium Lfetime > 10 5 h Shock A=30g; t= 11ms, halfsine (EN ) Vibration 10 to 150 Hz, 2,5 mm amplitude, 5g const. Acceleration, 1 Octave /Minute (EN ) Weight 350 g Environmental Conditions Operating temperature - 40 C to + 85 C Storage temperature - 40 C to + 85 C Humidity 98 % (without liquid state) Protection class (DIN ) IP 67 (with connection Plug in connected state) 2 INC - version1.0
3 INSTALLATION Electrical Connection The inclinometer is connected via 8 pin round connector Connector Assignment Pin Description Cable 1 +UB Supply voltage white 2 RxD brown 3 TxD green 4 Ground (Supply) yellow 5 X-Output grey 6 Signal Ground pink 7 Y-Output blue 8 red 8 pin round connector connector male inlay Instructions to mechanically install Do not connect the inclinometer under power! Do not stand on the inclinometer! Avoid mechanical load! INC - version1.0 3
4 Mechanical Drawings Dimension housing (mm) 4 INC - version1.0
5 Reference Level The Inclinometer has a mounting reference angel (black line)for an optimal mounting of the inclinometer, which is parallel to the x-axis. This reference angle must be placed exactly parallel to the object to be measured to prevent or minimize any mechanical offset/cross sensitivity. INC - version1.0 5
6 Mounting and Installation Instruction The inclinometer is designed for a horizontal mounting, i.e. the base plate of the inclinometer with the three mounting holes needs to be placed on the horizontal plane of the object to be measured. It can be mounted with M4 screw as a maximum. The mounting surface must be plane and free of dust and grease. We recommend cheese head screws with metrical thread M4 for the mounting. Maximum fastening torque for the mounting screws is 10 Nm. Installation Prior to installation, please check for all connection and mounting instructions to be complied with. Please also observe the general rules and regulations on low voltage technical devices. Avoid shock and vibration during measurement, as these could corrupt the measurement results. Inclination sensors that base on a fluidic measurement principle are optimal for static measurements and suitable to only a limited extent of dynamic measurement. Measurement The measurement of the tilt angle of the single measurement axis is carried out over the respective longitudinal and lateral axis of the inclination sensor. Reference is always the horizontal plane. 6 INC - version1.0
7 Models/Ordering Description Description Type Key Absolute inclinometer INC S. 1 H Measuring range Number of axis RS232 Voltage interface V Current interface C PWM P Switch S Version Mechanical Horizontal Dynamic 2 mpas Connection plug, 8 pins P8M 1 m cable exit CRWW Option - We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice INC - version1.0 7
HEAVY DUTY INCLINOMETER ANALOG & RS232 INTERFACE
The Heavy Duty inclinometers are robust inclination sensors specially designed for applications involving rough handling and exposure to rigorous conditions. The die cast aluminium housing and the metal
INDUSTRIAL INCLINOMETER ANALOG & RS232 INTERFACE
The industrial inclinometers are compact solutions for determining the inclination in both single and dual axes with remarkable precision and at a lower expense. The molded housing provides the mechanical
INDUSTRIAL INCLINOMETER SAE J1939 INTERFACE
The industrial inclinometers are compact solutions for determining the inclination in both single and dual axes with remarkable precision and at a lower expense. The molded housing provides the mechanical
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
ACCELENS INDUSTRIAL INCLINOMETER ANALOG & RS232 INTERFACE
The ACS industrial inclinometers are compact solutions for determining the inclination in both single and dual axes with remarkable precision and at a lower expense. The molded housing provides the mechanical
ACS HEAVY DUTY INCLINOMETER SAE J1939 INTERFACE
ACS HEAVY DUTY INCLINOMETER ACS Heavy Duty inclinometers from POSITAL are robust inclination sensors specially designed for applications involving rough handling and exposure to rigorous conditions. The
ABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
Installation instructions Inclination sensor EC2019 EC / / 2013
Installation instructions Inclination sensor UK EC219 EC245 739215 / 3 1 / 213 Inhalt 1 Safety instructions 3 2 Mounting 4 3 Electrical connection 4 4 Dimensions 4 5 Technical Data 5 6 Characteristics
Inclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
GSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
ACCELENS INDUSTRIAL INCLINOMETER CANOPEN INTERFACE
The ACS industrial inclinometers are compact solutions for determining the inclination in both single and dual axes with remarkable precision and at a lower expense. The molded housing provides the mechanical
DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
ABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
Applications: Industrial Automation, Cranes, Hoists, Utility Vehicles, Off-highway, Ag, and Forestry Equipment
TECHNICAL DATASHEET #TDAX06025X Inclinometer CANopen, 2 5-pin M12 Connectors Features: 1 or 2 axis inclination or slope sensors 2 axis (-80º 80º), functional up to +90 º 1 axis, vertically positioned (-180º
Applications: Industrial Automation, Cranes, Hoists, Utility Vehicles, Off-highway, Ag, and Forestry Equipment
TECHNICAL DATASHEET #TDA06020 CAN (SAE J1939) or (CANopen ) with Electronic Assistant P/N: A06020 Features: 1 or 2 axis inclination or slope sensors 2 axis (-80º 80º), functional up to +90 º 1 axis, vertically
Inclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
Absolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
Mounting possibilities (threaded M5)
L-LAS Series L-LAS-LT-55-RA-HS (High Speed) - Operates in an angle of total reflection (distance measurement) - Suitable for high-glossy objects (e.g. glass) - Line laser
D-Series Inclinometer
Dual axis inclinometer Measurement range +/-5 +/-15 and +/-30 High accuracy Digital and analogue output signal CANopen CE approved DESCRIPTION The D- series of conductive inclinometers offers modern SMD-
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
Convergent Reflective Micro Photoelectric Sensor
EQ- VF NX PM MS-AJ RT- PX- CY PHOTOELECTRIC SENSORS Mounting Stand Amplifier Built-in SERIES Convergent Reflective Micro Photoelectric Stable detection by convergent reflective mode Stable detection characteristics
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
ABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
TECHNICAL DATASHEET Absolute Motorfeedback Series AD 34
For brushless servo motors Light duty encoder Unique mounting concept: Save installation time and cost Mounting Depth: 25 mm (ST), 34 mm (MT) Up to 9 Bit ST - resolution + 2 Bit MT - resolution +20 C operating
EPGG001. Fieldbus Gateway RS-232 to PROFINET. Industrial Communication. Technical Data. Part Number
Fieldbus Gateway RS-232 to PROFINET EPGG001 Part Number Easy handling Gateway from RS-232/422/485 interfaces to PROFINET With two Industrial Ethernet ports Technical Data Electrical Data Supply Voltage
ABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL
Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof Housing: 58 mm - Shaft: 6 or 10 mm hollow- 15 mm - Resolution: Max. 16 Bit = 65,56 Steps
Absolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
MobileView Junction Box
Installation Instructions MobileView Junction Box (Catalog Number 2727-MRJB2) English The MobileView Junction Box (2727-MRJB2) integrates the following terminals into the control system: MobileView Guard
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
PM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.~ Amplifier Built-in selection guide... P.7~ General precautions... P.8~ PHOTO PHOTO Conforming
Mounting holes. Transmitter optics. 8-pol. fem. conn. Binder Series 712 (connection to PLC) Connecting cable: cab-las4/pc or cab-4/usb or cab-4/eth
L-LAS Series L-LAS-TB-50-CL - Line laser
ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
IB080QM65VA3 Part Number
Inductive Proximity Switch with increased Switching Distance IB080QM65VA3 Part Number Technical Data Inductive Data Switching Distance 8 mm Correction Factors V2A/CuZn/Al 0,93/0,40/0,36 quasi-flush A/B/C/D
Sturdy aluminium housing, aodized in black. LED red (-): Measuring value < lower tolerance threshold
L-LAS Series L-LAS-LT-85-RA-CL (Reduced Amplification) - Operates in an angle of total reflection - Suitable für high-glossy objects (e.g. glass) - Line laser
ABSOLUTE ROTARY ENCODER INTERBUS LOOP2
Main Features - Compact and heavy duty industrial model - Interface: INTERBUS Loop2 (Local-Bus) - ENCOM-Profile: K (programmable) - Housing: 58 mm - Resolution: max. 25 Bit =,554,42 steps over 4,096 revolutions
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
PM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions...p. Glossary of terms...p.983~ selection guide...p.~ / P.9~ General precautions...p.98~ Amplifier Built-in PHOTO PHOTO
PM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
PHOTO PHOTO Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.9~ Amplifier Built-in guide... P.393~ General precautions... P.~ Certified MEASURE
D-SERIES INCLINOMETER
SPECIFICATIONS Dual axis inclinometer Measurement range +/-5 +/-15 or +/-30 High accuracy Digital and analogue output signal CANopen CE approved FEATURES High accuracy Robust metal housing, IP Class 67/68
L-LAS Series. L-LAS-TB-F-6x1-40/40-CL L-LAS-TB-F-1x6-40/40-CL. Design. L-LAS Series Laser Line Sensors. Product name:
L-LAS Series L-LAS-TB-F-6x1-40/40-CL L-LAS-TB-F-1x6-40/40-CL - Line laser
TSE. Functional Description. Order Code TSE HA /2010. Electrical Pressure Switch N D. p max up to 400 bar (5801 PSI)
Electrical Pressure Switch TSE HA 90 /010 p max up to 400 bar (5801 PSI) Electronic pressure switch TSE To monitor the pressure in the circuit and the signalisation switching after reaching pre-set pressure
L-LAS Series L-LAS-LT-55. Design. L-LAS Series Laser Line Sensors. Product name: L-LAS-LT-55 (incl. Windows - software L-LAS-LT-Scope)
L-LAS Series - Visible laser spot (red), class 2 laser product - Reference distance 55 mm - Measuring range typ. 10 mm, resolution typ. 0,01 mm - Integrated interference filter / red light filter - CCD
P-SERIES INCLINOMETER
SPECIFICATIONS Single or Dual axis inclinometer Measurement range +/-5,+/-15 or +/- 45 High accuracy Digital and analogue output signal FEATURES Measurement range up to +/-45 High resolution Robust metal
Installation Manual. WKC Weigh Modules
Installation Manual Weigh Modules Table of Contents 1 Installation 3 1.1 Mechanical installation... 3 1.1.1 Support Interface (Support Surface)... 3 1.1.2 Weighing Interface (Weighing Platform)... 3 1.2
TLP100 INCLINATION SENSOR MEMS technology with High resolution
CHARACTERISTICS ADVANTAGES MEMS technology High protection level IP67 and wide temperature range from -40 C... +85 C Stable accuracy over whole temperature range Resolution up to 0,01 Single axis 0 to
Suitable for detecting transparent films or transparent bottles
Ultrasonic Sensor Suitable for detecting transparent films or transparent bottles Reliable detection of transparent objects The sensor reliably detects transparent films or transparent objects. Only 16
L-LAS Series L-LAS-CAM-256 L-LAS-CAM-256-SL L-LAS-CAM-512 L-LAS-CAM-512-SL L-LAS-CAM-1024 L-LAS-CAM-1024-SL. Design. L-LAS-CAM Series Line Cameras
L-LAS Series L-LAS-CAM-256 L-LAS-CAM-256-SL L-LAS-CAM-512 L-LAS-CAM-512-SL L-LAS-CAM-1024 L-LAS-CAM-1024-SL - Various CCD line detectors available - Several high-precise objectives to choose from - Various
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
BF series Paddle controllers
A BF series The BF Series Paddle is the very latest generation in high precision contactless controls. It combines the features of a contactless single axis joystick and a switch in one control. Long trouble-free
Analog output linear. Wear free, high resolution High shock resistance Servo flange mounting U8 I1
PTAM2 Robust Inclination Sensor with Analog Output Analog Inclination Sensor for 1 axis or 2 axes in MEMS technology Measurement range ±180 for 1 axis or ±60 for 2 axes class IP67 / IP69K Analog output
Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
DATA SHEET ABSOLUTE MAGNETIC ROTARY ENCODER HEAVY DUTY SAE J1939
POSITAL absolute magnetic rotary encoders are available with interface. These heavy duty encoders are designed for mobile machinery and other demanding environments. An IP69K environmental rating results
Distance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
Pressure switch RE B/ Type HEDE10.../1/ Operating instructions
Pressure switch Type HEDE10.../1/ RE 30276-B/10.10 Replaces: 06.10 Operating instructions 2/20 Bosch Rexroth AG HEDE10.../1/ RE 30276-B/10.10 Contents 1 Overview of menu...3 2 Safety note... 4 3 Operating
(threaded M5) 7-pole fem. connector Binder Series 712 (connection Master/Slave) Connecting cable: cab-las7-male not necessary for single system!
L-LAS Series L-LAS-LT-1000-HS (High Speed) - Line laser
Current ma Redundant second channel as option
PRAS2 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 degrees in a flat housing with 36 mm dia. Protection class IP67/IP69K Non-contact with external position magnet Wear free Flat
Product Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications
Product Information ECN 1324S EQN 1336S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications 112015 ECN 1324S, EQN 1336S Rotary encoders for absolute position values with
Even a specular background does not affect the sensing performance if the sensor is located 30mm away from it (when directly opposite).
SERIES Convergent Reflective Micro Photoelectric Convergent Reflection Sensing Ensures Stable Detection Marked Conforming to EMC Directive Stable Detection by Convergent Reflective Mode Stable detection
NOVOHALL Rotary Sensor touchless transmissiv. Series RFC4800 SSI, SPI, Incremental
NOVOHALL Rotary Sensor touchless transmissiv Series RFC4800 SSI, SPI, Incremental The sensor utilizes the orientation of a magnetic field for the determination of the actual position. Therefore, a magnet
Installation Instructions Temperature transmitter TAA /00 06/2011
Installation Instructions Temperature transmitter TAA431 706042/00 06/2011 Contents 1 Functions and features...3 2 Installation...4 2.1 Addressing...4 2.2 Mechanical installation...4 2.3 Connection to
Linear Position Transducer HLT 1000-R2
Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
ABSOLUTE ROTARY ENCODER MODBUS/TCP
Main Features - Compact and Heavy-Duty Industrial Model - Communication via Standard Protocols - Integrated Web Server - Interface: Modbus/TCP - Housing: 58 mm - Full shaft: 6 or 10 mm / Hub Shaft 15 mm
ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information
Product Information ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing Suited for safety-related applications up to SIL 3 when coupled with additional measures 09/2018 ECI 1319,
TECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
L-LAS Series. L-LAS-TB-F-8x1-30/40 L-LAS-TB-F-1x8-30/40. Design. L-LAS Series Laser Line Sensors. Product name:
L-LAS Series L-LAS-TB-F-8x1-30/40 L-LAS-TB-F-1x8-30/40 - Laser line sensor, 1 mw, class 2 laser product - Visible laser line (red light 670 nm), typ. 9.5 mm x 1.5 mm - Measuring range typ. 8 mm - Resolution
GS202 Encoder Switch
GS202 Encoder Switch 20:2 encoder switch 20 encoder inputs (TTL / RS422 standard) Input signals A, /A, B, /B, Z, /Z on each encoder input 2 x 6 control inputs (HTL / PNP) 2 encoder outputs (TTL / RS422
ABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
NOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
Material: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
F3EM Measuring lightcurtain in robust aluminium housing
Measuring lightcurtain in robust aluminium housing F3EM Measuring lightcurtain in robust aluminium housing The F3EM provides easy to install and set up height and profile measurement. The analog output
Ultra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! 12 mm in
1 Ultra-small Micro Photoelectric PM- SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.19~ / P.10 Amplifier Built-in selection guide... P.1~
PM-24 SERIES. Ultra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! ( ) Equipped with two independent outputs
19 Ultra-small Micro Photoelectric Sensor PM- SERIES Related Information General terms and conditions...p.1 Glossary of terms / General precautions...p.98~ / P.98~ Amplifier Built-in Sensor selection guide...p.11~
Thread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
DATA SHEET ABSOLUTE OPTICAL ROTARY ENCODER ETHERNET POWERLINK
Main Features - Compact Industrial Model - Communication via Ethernet Powerlink V2 - Interface: Ethernet - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm - Max. 65536 Steps per Revolution (16
POSIROT. PRAS26 Magnetic Angle Sensor. Magnetic Angle Sensors. Datasheet
Magnetic Angle Sensors Magnetic Angle Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation or
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
PM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection. Hardly affected by background
PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Micro Photoelectric SERIES Related Information General terms and conditions... F- Glossary of terms... P.39~ selection guide... P.~ General precautions... P.0
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
Mounting. possibilities. Transmitter optics. 8-pole fem. connector Binder Series 712 (PLC) Connecting cable: cab-las8/sps or cab-las8/sps-w
L-LAS Series L-LAS-TB-50 - Laser line sensor, 1 mw, class 2 laser product - Visible laser line (red light 670 nm), 50 mm light curtain - Measuring range typ. 48 mm - Resolution typ. 30 μm - Integrated
Energetic diffuse reflection light scanner. Dimensioned drawing
Energetic diffuse reflection light scanner Dimensioned drawing We reserve the right to make changes 93_c3gb.fm Part No. 51 1168 1-3 V DC 5 17mm 1mm Infrared light Background suppression through appropriate
Light Curtains. Type 4 SG4. Type 4 SG4 Series. 468
Type 4 SG4 Type 4 SG4 Series Overview Finger Protection Hand Protection XW Series E-Stops Interlock Switches Type 4 SG4 features: Integrated light curtain for Finger Protection or Hand Protection Operating
Electronic Temperature Switches. Catalogue. Electronic Temperature Switches. Control. Overview. every move
Electronic Temperature Switches Catalogue Electronic Temperature Switches Overview Control every move Content Content Overview 3 Electronic Temperature Transducer 3 UTA2 3 Electronic Temperature Sensors
MAGNETOSTRICTIVE TRANSDUCER
MGNETOSTRICTIVE TRNSDUCER MB Series Content: Technical Data...2 Technical Drawing...3 Electrical Connection & ccessories...4 Order Code...5 Options & ccessories...6 Key-Features: - vailable measurement
Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
Industrial Pressure Transmitter
NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter
MDT 2000 Magnetostrictive linear position transducer
Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 28 Robust miniature sensors wiresensor MP / MPW analog - Miniature design - Optional IP 67 (MPW) - For fast measurement and harsh environments
AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
Connector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable
44 Connector Built-in Micro Photoelectric SERIES Related Information General terms and conditions... F-1 Glossary of terms... P.1~ selection guide... P.441~ General precautions... P.140 Amplifier Built-in
Supply Voltage V dc Supply is fully isolated internally, and protected against transients. Internal power modules are CE certified.
Features Precision closed loop inertial sensor with optical position feedback and fluid damping Single axis measurement range ±5 to ±45 High resolution measurement
Data Sheet for Joysticks
Finger Joystick Series 87 Dual redundant outputs IP67 sealed lever heights: 8mm and 60mm 5 lever colors Series 87 is offering paddle joysticks of high precision and quality - claims that are not only supported
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
LVX Control Unit. Features:
Date 2013-02-28 Control Unit Features: Most parameters can be defined as required for your interfaces. You decide which information is output and how. Fast cycle times, just a few µs/beam. Maximum beam-count
XUK8TAKSMM12 photo-electric sensor - XUK - diffuse - Sn 5m 1Q auto PNP/NPN
Characteristics photo-electric sensor - XUK - diffuse - Sn 5m 1Q auto PNP/NPN Complementary Enclosure material Lens material Maximum sensing distance Output type Add on input Wire insulation material Status