MDT 2000 Magnetostrictive linear position transducer
|
|
- Amelia Snow
- 5 years ago
- Views:
Transcription
1 Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide, and the echo generated by the interaction with a magnet placed on the slider. The flight time is a direct function of the distance of the cursor from the pick-up of reception located in the head of the transducer. Since the speed of the returning echo is very high (around mt/sec.), in order to achieve the required resolution of the position value, the flight time is measured with a high performance counter capable of accumulating pulses generated by a high frequency clock. The use of magnetostrictive measurement principle allows us to enclose the waveguide in completely watertight enclosures as well as inside cylinders resistant to high pressures.
2 Special Features Contactless magnetostrictive measurement technology Unlimited mechanical life Absolute measurement Resolution 16 Bit Low temperature coefficient < 30 ppm/ C Applications Fluid Power Pneumatic- and Hydraulic Cylinder Manufacturing Engineering Mobile Machinery Insensitive to shock and vibration Protection class IP65 profile version / IP68 Rod Version Operating pressure for Rod version up to 350 bar (peak of 700 Bar)
3 Main Scheme Rod Version Threaded flange M18x1,5 (3/4 16 UNF-A) Option Connector outlet Electrical Stroke Option Cable outlet Profile Version Stroke lenght pin M12 * Start Position 19 mm Magnet Slider SM10 Standard position magnets (not included in delivery, please order separately) (detail see chapter accessories)
4 Technical Data
5 Connector Wiring Rod Version M16 Pin Cable Function 1 Grey Output 1: Position # /10..0 V 4(0)...20/20...4(0) ma 2 Pink DC Ground 3 Yellow 4 Green Not Connected Not Connected 5 Brown +24 VDC (-15/+20%) 6 White DC Ground (0 V) Profile Version M12 M12 A-coded Pin Function VDC (-15/+20%) 2 Output 1 3 DC Ground (0V) 4 Not Connected 5 DC Ground
6 Ordering specifications Mechanical version 101:Profile design 102 Rod design Electrical interface 4: Analog interface Output signal analog interfaces 4 1: Voltage output 2: Current output Analog interface voltage output 41: 1: V and V Analog interfce current output 42 1: mA 2: ma 3: ma 4: ma M D T A - X X X X - X X X - X X X - X X X Series Electrical measuring range Standard lengths 0050 up to 4250mm 0020 up to 0500mm in 25 mm-steps 0500 up to 1000 mm in 50 mm-steps 1000 up to 2000 mm in 100 mm-steps 2000 up to 4250 mm in 250 mm-steps Other lengths on request Electric Connections 101: Connector M12, 5 poles male 102: Connector M16, 6 poles male 201: Cable, 6-poles, shielded, 1 m 203: Cable, 6-poles, shielded, 3 m 205: Cable, 6-poles, shielded, 5 m
7 Accessories Model 101 Profile Version Position Magnet Magnet Slider S Part no. SM10 Magnet Slider V Part no. SM11 U-Magnet Part no. OM33 Block Magnet L Part no. FM10 Material: GFK. magnet hard ferrite Material: GFK. magnet hard ferrite U- Magnet OD33 Material: Hard ferrite Weight: Ca. 35 gr Weight: Ca. 35 gr Only for: model 101 Weight: Ca. 20 g Material: PA ferrite GF20 Weight: Ca. 11 g Operating temperature: Operating temperature: Operating temperature: Operating temperature: C C C C Fastening torque for M4 screw:1nm Fastening torque for M4 screw:1nm Cable Connectors * M12 (5 pin) female, straight Part no. C500 M12 (5 pin) female, angled Part no. C590 Housing: GD-Zn, Ni / IP 67 Housing: GD-Zn, Ni / IP 67 Termination: Screw, max.1.5mm² Termination: Screw, max.0.75mm² Contact insert: CuZn Contact insert: CuZn Operating temperature: Operating temperature: C C Cable Ø mm( in.) Cable Ø mm( in.) Fastening torque: 0.6 Nm Fastening torque: 1 Nm Mounting Clamps Material: Stainless steel / (AISI 304/303) Mounting clamp Part no. MB1 * Important: Please Follow the manufacturer's mounting instruction Controlling design dimensions are in millimeters and measurements in ( ) are in inches
8 Accessories Model 102 Rod Version Product Dimensions Material Application Standard magnet Ring magnet OD33 Part No.RM33 Composite PA-Ferrite-GF20 Weight ca. 14gr Operating temperature Surface pressure max.40n/mm² Fastening torque for M4 Screw max. 1Nm Ring magnet OD18 Part No.RM25 Composite AL-Ferrite Weight ca. 8gr Operating temperature Surface pressure max.40n/mm² 25 6 pin connector M16 Part No. C600 (female) Housing: Zinc nickel-plated Termination: Solder Contact insert: Silver plated Max. Cable Ø 8 mm Analog
Temposonics. Magnetostrictive Linear Position Sensors. EE Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EE Analog Pressure-resistant sensor rod Compact sensor housing High operating temperature MEASURING TECHNOLOGY For position measurement, the absolute,
More informationTemposonics. R-Series Profibus. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm
R-Series Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Measuring length 5-7600 mm Advanced Communication... offers Multi-Position Measurement Rugged Industrial Sensor
More informationTemposonics. R-Series Profibus. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Stroke length mm
Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Stroke length 25 7600 mm Advanced Communication offers Multi-Position Measurement Rugged industrial sensor Linear and absolute
More informationIK4A (with ONDA technology)
IK4A (with ONDA technology) CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (ANALOG OUTPUT) Main characteristics ONDA technology Optimized mechanical structure Strokes from 50 to 4000 Wide range
More informationRK CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (ANALOG OUTPUT OR START/STOP)
RK CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (ANALOG OUTPUT OR START/STOP) Main characteristics Absolute transducer Strokes from 50 to 4000 (RK-_- -N/S) Digital output RS422 Start/Stop (RK-_-
More informationTemposonics. R-Series POWERLINK. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm
Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Measuring length 25-7600 mm For short cycle times Real Time Measurement Rugged Industrial Sensor Linear and Absolute Measurement
More informationRK-A CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER
RK-A CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH REMOTE ELECTRONICS (ANALOG OUTPUT) Main characteristics Absolute transducer with remote electronics structure Sensor available in three
More informationInductive displacement measurement system model series IE25P with programmable analogue interface
Inductive displacement measurement system Document No.: IE 12781 BE Date: 05.01.16 Contactless, wear-free sensor system Analogue interface Measuring range programmable Measuring range up to 0 mm Stainless
More informationLinear Position Transducer HLT 1000-R2
7 Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
More informationDistance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationRK-5 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED CONNECTION. Main features
RK-5 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED CONNECTION (ANALOG OUTPUT) Main features Absolute transducer Stroke: 50 to 2500mm Direct analog output (RK-5 N/K/E) Inverse analog
More informationRK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD
RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output
More informationSSI Output. SSI output: 24/25/26 bit binary/gray. SSI Output
SSI output: 24/25/26 bit binary/gray Rugged fully closed design Linear, absolute measurement LEDs for sensor diagnostics Digital technology, stable and reliable Non-contact sensing technology Superior
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationRK-4 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH THREADED HEAD
RK-4 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH THREADED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-4- -N/E/S) Digital output
More informationTemposonics. R-Series SSI. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm. Perfect data processing I 37 I
R-Series SSI Temposonics Absolute, Non-Contact Position Sensors R-Series SSI Temposonics RP and RH Measuring length 25-7600 mm Perfect data processing 0,5 µm Rugged Industrial Sensor Linear and Absolute
More informationLinear Position Transducer HLT 1000-R2
Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
More informationBulletin 871D Cylinder Position Inductive Style
Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal
More informationEAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH Synchronous Serial Interface (SSI) Output
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors Models RP and RH Synchronous Serial Interface () Output SENSORS Document Part Number 550989 Revision E Data Sheet Model RP Profile-style
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationData Sheet. Model ER position sensor, features a versatile rod-and-cylinder design with optional dual rod ends. Interrogation Return wire.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model ER Analog / Digital-Pulse (Start/Stop) Output SENSORS Document Part Number 550996 Revision D Data Sheet Model
More informationT E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
More informationT E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
More informationData Sheet for Linear Sensors
MDCG MDCL MDCT-Plug MDCT-Cable With integrated electronics Probe, ball joints, loose push rod (loose core) Measuring strokes from 2 to 0 mm Cable or plug connection Supply voltage ± 1 V or 24 V Output
More informationTemposonics. R-Series CANbus. R-Series CANopen CANbasic. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm
R-Series CANbus Temposonics Absolute, Non-Contact Position Sensors R-Series CANopen CANbasic Temposonics RP and RH Measuring length 25-7600 mm More than just a sensor Multi-Position Measurement Rugged
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 28 Robust miniature sensors wiresensor MP / MPW analog - Miniature design - Optional IP 67 (MPW) - For fast measurement and harsh environments
More informationINSTALLATION GUIDE Magnetostrictive Sensor Series MAZ
INSTALLATION GUIDE Magnetostrictive Sensor Series MAZ For more information please see the data sheet at www.waycon.biz/products/magnetostrictive-transducers/ FIRST STEPS WayCon Positionsmesstechnik GmbH
More informationMICROPULSE Generation 7 Analog Rod-Style Transducers. The global standard for analog position sensing
MICROPULSE Generation 7 Analog Rod-Style Transducers The global standard for analog position sensing Generation eration 7 The global standard for analog position sensing Trusted around the world Balluff
More informationSection 2. Connectors Field attachable
E L E C T R O N I C C O N N E C T O R S Section 2 Connectors Field attachable 89 SAL M8x1 Connectors Field attachable Nomenclature S A L - 8 - R K W C 4 - L 5,5 SAL Sensor Actor Line Installation size
More information955S BRIK. Series 955S Brik. Smart BRIK LDT ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE... REGARDLESS. Linear Displacement Transducer
Series 955S Brik Linear Displacement Transducer Installation Manual 955S BRIK Smart BRIK LDT ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE... REGARDLESS Introduction The 955S Smart Brik is an accurate programmable,
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationTemposonics GENERATION THE NEW I AM. Magnetostrictive Linear Position Sensors. R-Series V EtherNet/IP Operation Manual
Temposonics Magnetostrictive Linear Position Sensors R-Series V EtherNet/IP I AM V THE NEW GENERATION Table of contents 1. Introduction... 3 1.1 Purpose and use of this manual... 3 1.2 Used symbols and
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More informationPRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationMK4 and IK4/SK4/RK4/RK2 Series Installation Manual
MK4 and IK4/SK4/RK4/RK2 Series Installation Manual Code 85190C Edition 04-2015 CONTENTS General Precautions Pag. 2 MK4 Series Correct use of installation brackets Pag. 2 MK4 Series Correct use of the PCUR034/PCUR039
More informationDelivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationDraw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
More informationBTL5-A/C/E/G1_-M -HB/WB-FA /F -C. User s Guide. english
BTL5-A/C/E/G1_-M -HB/WB-FA /F -C User s Guide Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany Phone +49 7158 173-0 Fax +49 7158 5010 Servicehotline +49 7158 173-370 balluff@balluff.de www.balluff.com
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. E-Series Models EP and EL Analog and Start/Stop Outputs.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Models EP and EL Analog and Start/Stop Outputs SENSORS Document Part Number: 551248 Revision A Data Sheet Model EP position
More informationIK4 P (with ONDA technology)
IK4 P (with ONDA technology) CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (PROFIBUS OUTPUT) Main features ONDA technology Stroke: 50 to 4,000mm Position resolution settable via software up to
More informationBTL6-A_10-M -A1-S115. Data Sheet. english
BT6-A_10-M -A1-S11 english Data Sheet Balluff GmbH Schurwaldstrasse 9 76 Neuhausen a.d.f. Germany Phone +49 (0) 71 8/1-0 Fax +49 (0) 71 8/0 10 Servicehotline +49 (0) 71 8/1-70 E-Mail: balluff@balluff.de
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationBVS UR E Ordering code: BVS001H
BVS UR-3-101-E Ordering code: BVS001H Vision sensor BVS-E Universal PNP (2x) 1) Teach reference image, 2) Power, 3) Output 1 active, 4) Output 2 active, 5) Connection with PC, 6) Sharpness Characteristic
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationGSV-3USBx2 3,5mV/V 4,2V
x2 3,5mV/V 4,2V Highlights Powered via USB port Sampling rate 10 khz Data rate 1...1000 Hz straingage quarter, half, full bridges Built-in bridge supplement 350 Ohm Optionally also for displacement transducers
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More informationPOSICHRON PCQA Mounting Sets
PCQA Mounting Sets Mounting set PCQA-BFS1 with mounting clamps Isolation sleeve 46 Isolation strip Mounting clamp P 58 Option -BFW Mounting brackets for PCQA22 and PCQA24 Note: The option -BFW can only
More informationBTL5-P/I/L1_-M/U -K-SR 32/K. Technical Description User's Guide. english
BTL5-P/I/L1_-M/U -K-SR 32/K english Technical Description User's Guide Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany Phone +49 (0) 71 58/1 73-0 Fax +49 (0) 71 58/50 10 Servicehotline +49
More informationContents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000307 MLC500T30-750 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH Profibus-DP Output.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Models RP and RH Profibus-DP Output Data Sheet SENSORS Document Part Number 550990 Revision D Model RP Profile-style
More informationTECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
More informationAbsolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationIndustrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,
More informationNOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
More informationGSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
More informationFlexible temperature transmitter and sensor
/ processing unit without display senso a mperature senso TT/TC series TT/TC ser Flexible temperature transmitter and sensor The of the TT/TC series detect temperature with a Pt100 4-wire probe. Available
More informationECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information
Product Information ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing Suited for safety-related applications up to SIL 3 when coupled with additional measures 09/2018 ECI 1319,
More informationInductive sensor BI5-EM18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 22 Low-cost draw-wire displacement sensors wiresensor MK88 analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationInclinometer. 4-20mA and RS232
Inclinometer 4-20mA and RS232 Real size Main Features - Two axis digital inclinometer n - Angle measurement range of +/-5, +/-15 and +/-30, Resolution up to 0.001 - Active linearization and temperaturecompensation
More informationProduct Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide
Product Information LS 1679 Incremental Linear Encoder with Integrated Roller Guide April 2016 LS 1679 Incremental linear encoder for measuring steps to 5 µm or 1 µm Integrated wear-free roller guide with
More informationBTL7-A/C/E/G5 -M -H/W(8)-S32/S115/KA /K User's Guide
S32 BTL7-A/C/E/G5 -M -H/W(8)-S32/S115/KA /K User's Guide english www.balluff.com BTL7-A/C/E/G5 -M -H/W(8)-S32/S115/KA /K 1 Notes to the user 5 1.1 Validity 5 1.2 Symbols and conventions 5 1.3 Scope of
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationMAGNETOSTRICTIVE TRANSDUCER
MGNETOSTRICTIVE TRNSDUCER MB Series Content: Technical Data...2 Technical Drawing...3 Electrical Connection & ccessories...4 Order Code...5 Options & ccessories...6 Key-Features: - vailable measurement
More informationProduct Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications
Product Information ECN 1324S EQN 1336S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications 112015 ECN 1324S, EQN 1336S Rotary encoders for absolute position values with
More informationACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT
Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions
More informationBTL5-A/C/E/G1_-M/U -K-SR 32/K. Technical Description User's Guide. english
english Technical Description User's Guide Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany Phone +49 (0) 71 58/1 73-0 Fax +49 (0) 71 58/50 10 Servicehotline +49 (0) 71 58/1 73-3 70 E-Mail:
More informationDraw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
More informationTemperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationTemposonics. Magnetostrictive Linear-Position Sensors. R-Series Model RP and RH Sensors Profibus-DP Output B Product Specification
Temposonics Magnetostrictive Linear-Position Sensors R-Series Model RP and RH Sensors Profibus-DP Output 550990 B Product Specification Rugged industrial sensor Linear, absolute measurement LEDs for sensor
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 24 Low-cost draw-wire displacement sensors wiresensor MK analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationIndustrial Pressure Transmitter
NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationElectronic Level Switch ENS 3000
Electronic Level Switch ENS 3000 Description: The ENS 3000 is an electronic level switch with integrated display. The instrument has 1, 2 or 4 switching outputs and an analogue output signal is available
More informationstandard, short, preferential, top
ipf electronic gmbh Kalver Straße 27 standard design short design preferential series top series standard, short, preferential, top norm sensing ranges, increased sensing ranges 1100 1 2 1100 norm sensing
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationDevice Configurator ECI-1
Honsberg Instruments GmbH Tenter Weg 2-8 42897 Remscheid Germany Fon +49 (0) 2191-9672 - 0 Fax - 40 www.honsberg.com info@honsberg.com Device Configurator ECI-1 Handling and operation Connection The device
More informationNOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
More information955 ebrik INSTALLATION MANUAL. Series ebrik ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE... REGARDLESS LINEAR DISPLACEMENT TRANSDUCERS
Series ebrik INSTALLATION MANUAL LINEAR DISPLACEMENT TRANSDUCERS ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE... REGARDLESS Introduction The is an accurate programmable, auto-tuning, noncontact, linear
More informationData Sheet. Model EP position sensor - Full Size Profile Housing Stroke Length: 50 mm to 2500 mm (or 2 in. to 100 in.)
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Models EP and EL Synchronous Serial Interface (SSI) Output Data Sheet Document Part Number: 551299 Revision B Model
More informationUltrasonic Analog Output Sensors
Model SM606 Series SUPERPROX Ultrasonic Analog Output Sensors High repeatability 500 khz ultrasonic frequency Fast response - as fast as 2.0 ms sampling rate Self-contained, 18 mm barrel or flat-profile
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationBTL5-F1 -M -A/B/Z-S115. User s Guide. english
english User s Guide Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany Phone +49 (0) 71 58/1 73-0 Fax +49 (0) 71 58/50 10 Servicehotline +49 (0) 71 58/1 73-3 70 E-Mail: balluff@balluff.de
More informationNOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog
NOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog Special features non-contacting, magnetic long life electr. angle 720 up to 5760 in 360 -steps available (equates 2... 16 turns) continuous
More informationNOVOHALL Rotary Sensor non-contacting. Series RSB-3600 Series RMB-3600
NOVOHALL Rotary Sensor non-contacting Series RSB-3600 Series RMB-3600 Special features Non-contacting, hall technology Measuring range up to 5760 Single- and multiturn True-power-on system: counts turns
More informationBTL7-A/C/E/G5 -M -K(8)-SR32/SR115/K User's Guide
User's Guide english www.balluff.com 1 Notes to the user 5 1.1 Validity 5 1.2 Symbols and conventions 5 1.3 Scope of delivery 5 1.4 Approvals and markings 5 2 Safety 6 2.1 Intended use 6 2.2 General safety
More informationUltrasonic Analog Output Sensors
Model SM606 Series SUPERPROX Ultrasonic Analog Output Sensors Narrow, 7½ sonic beam High repeatability 500 khz ultrasonic frequency Fast response - as fast as.5 ms sampling rate Self-contained, 8 mm, barrel,
More information