The power of one What s new in Relion 670 and 650 series version 2.2?

Transcription

1 The power of one What s new in Relion 670 and 650 series version 2.2?

2 The power of one solution for protection and control Presenters Joseph Menezes Global Product Manager, Relion 670 series Krister Hagman Global Product Manager, Relion 650 series June 30, 2017 Slide 2

3 Agenda Introduction Evolution continues Relion 670/650 series portfolio What s new in Relion 670/650 series version 2.2 Applications Hardware System features The best choice for your needs Digital substation Migration path and Life-cycle status Summary June 30, 2017 Slide 3

4 Relion 670 and 650 series Features and benefits introduced Page 1(2) Area Our offering Customer benefits Flexibility Flexible and powerful products Can be configured for any application area on protection and control and available as preconfigured and customized based on requirements Supports process bus applications (support digital substations applications) Flexibility Flexibility with IEC Flexibility by supporting IEC Ed 1 and Ed 2, without change of firmware Flexibility Flexibility Flexible product naming (FPN) New form factor 6U and ½ 19 Ease-of-Use Ready-to-use configurations Ease-of-use Large and user friendly HMI Increased usability Ease-of-use Flexibility Forcing of Binary Signals Enables flexible product naming by enabling the mapping of an IED-vendor independent IEC model. Easier deployment when utility defined IEC communication model is to be mapped to that of the IED model. Requirement from the market for two side-side mounting and retrofit of 6U IEDs Easier and faster deployment; Reduce engineering time; Less training required; Easy to order Increased usability and time saving during testing and commissioning June 30, 2017 Slide 4

5 Relion 670 and 650 series Features and benefits introduced Page 2(2) Area Our offering Customer benefits Ruggedness Improved mechanics Withstand higher EMC and mechanical stress Security Security Port hardening User account management Secure communication Security events Centralized Account Management (CAM) Applications Multipurpose filter Applications High speed distance protection Applications Settings via IEC Significant improvements keeping our IEDs cyber-secure. Allow only authorized users to access our IEDs, encryption of communication prevents wrongful usage, logging of security events keeps a clear track Enables easy deployment of users, access rights and certificates in the substation automation system. Increasing cyber security support for compliance to NERC CIP and IEC Special applications like sub-synchronous harmonics can be detected and equipment isolated before serious and expensive damages occur Fast fault clearance enable higher power transfer on lines. Easier settable thereby faster deployment. Improvement of the high speed line distance protection with combined characteristics of Quad/Mho (trip times as low as 13 ms) Enables adaptivity of line distance protection and voltage regulation applications from SCADA system June 30, 2017 Slide 5

6 Market drivers Market driven evolution continues with top notch IED portfolio for our customer Digital substation solutions Support different system topologies Improved communication/redundancy possibilities, routing Precision Time Protocol (PTP) Ethernet ports increased, up to 6 (670) 4 (650) HSR redundancy now available, ports can be single/prp/hsr All ports can be configured GOOSE publish/subscribe Conditional blocking of applications when using SV Complete flexibility with 8-1/GOOSE/SV on any port Precision Time Protocol (PTP) IEC/IEEE profile (IEEE 1588) Protection, control, monitoring Centralized busbar protection covering more zones Railway applications to cover larger market Integrated PMU functionality in P&C IEDs More conditional monitoring functionality REB670 supporting up to 6zones, 24 bays, conventional & IEC/UCA LE RER670 supporting 16,7/50/60Hz, conventional & IEC/UCA LE PMU functionality now in addition to standalone RES670, also supported in REC670, RED670, REL670, RET670, REG670 Condition monitoring of transformer, insulation lossof-life June 30, 2017 Slide 6

7 Market drivers Market driven evolution continues with top notch IED portfolio for our customer Line protection Overall product improvements Improvements to high-speed line distance protection Faster line differential protection Charging current compensation Transfer more data via line data communication module A more cost-effective line differential protection Closed box with higher ingress protection Improved communication/redundancy possibilities, routing Easier field upgrades/updates Easier GOOSE engineering Cost effective New high-speed line differential protection, earlier one available True charging current compensation with remote end voltage measurement Line data communication module 2Mbps supports 9A+192B Cost-effective line differential protection especially 2CB appl. All electronic modules are hardened with conformal coating All ports single or PRP/HSR (pairs), any combination, routing Easier field upgrades/updates with Field Service Tool (FST) GOOSE engineering using graphical application configuration High-speed line distance protection the promoted one June 30, 2017 Slide 7

8 Agenda Introduction Evolution continues Relion 670/650 series portfolio What s new in Relion 670/650 series version 2.2 Applications Hardware System features The best choice for your needs Digital substation Migration path and Life-cycle status Summary June 30, 2017 Slide 8

9 Relion series serving different application areas June 30, 2017 Slide 9

10 The power of one solution for protection and control Relion portfolio Busbar protection, REB Best choice for protection and monitoring of busbars, T- connections and meshed corners from MV to extra HV levels Generator protection, REG Best choice for protection and monitoring of generators in hydro, pump-storage, gas, diesel, steam, nuclear, cogeneration and renewable power stations Railway application, RER Best choice for protection and control device for 16.7, 50 and 60 Hz, railway applications with fast distance and flexible different power transformer protection Bay control, REC Best choice for control, monitoring and protection of circuit breakers, disconnectors and earthing switches Line distance, REL Best choice for protection, monitoring and control for overhead lines and cables, or combinations of overhead lines and cables Phasor measurement, RES Best choice for wide area protection, monitoring and control applications where monitor and act upon power system stability conditions is required Line differential, RED Best choice for protection, monitoring and control of overhead lines and cables with up to five line terminals Breaker protection, REQ The best choice for feeder and circuit breaker back-up protection Trafo protection, RET Best choice for 3 and 3-winding transformers, step-up transformers in power stations, railway transformers, phase-shifting transformers and shunt reactors June 30, 2017 Slide 10

11 Agenda Introduction Evolution continues Relion 670/650 series portfolio What s new in Relion 670/650 series version 2.2 Applications Hardware System features The best choice for your needs Digital substation Migration path and Life-cycle status Summary June 30, 2017 Slide 11

12 Relion 670 and 650 series Features and customer benefits Flexible and powerful products Communication redundancy IEC/UCA LE + GOOSE 6-zone busbar protection Complete ABB portfolio that supports digital substations applications Can be configured for any application areas on protection and control Available as preconfigured and customized based on requirements Flexibility supporting IEC Ed 1 and Ed 2 With HSR and PRP redundancy Improved system availability, functionality and reliability without switchover Cost effective solution Efficient system design supports 100% digital substations Allows configuration of simple 9-2 systems, as well as IEC system engineering on station and process bus Efficient Improved protection, monitoring & control offers costeffective solutions Requirement from the market Ready to use configuration Ethernet ports, Time sync via PTP Defense in depth PMU in REC, RED, REG, REL and RET Simpler and faster to deploy and configure Enables flexible and efficient system design of network architectures and interoperability Enabling digital substation Significant cost saving when using PTP, Line differential protection, PMU do not need separate GTM or IRIG-B hardware modules Increased security & integrity for customer installations meet higher demands from the market Significant improvements and usability during maintenance generate cost benefits Market requirement integrated PMU functionality in protection & control IEDs June 30, 2017 Slide 12

13 Busbar protection Customer benefits REB670 Protection up to 6 busbar differential zones (1phase) Protection up to 2 busbar differential zones (1phase & 3phase) REB670 provides complete protection to practically any type of busbar topology Single, double, triple, double/triple with isolators/tie-cbs Supports up to 24 bays Supports up to 8 SV streams Cost savings Faster engineering and installation Better than what competition can offer comparing zones, bays and mix of conventional and process bus Relion REB670: Supports several types of busbar topologies, simple to complex Significant cost advantages, enabling digital substation Relion REB670: Reliably mix bays with conventional and process bus June 30, 2017 Slide 13

14 Line protection Customer benefits REL670 High speed line distance protection Sub-cycle operating times, tested according to IEC Extremely easy to order, configure & set as all zones, characteristics, phase-selection, directional elements is in one function Applicable for all solidly as well as isolated/high-impedance earthed networks with phase-preference logic for crosscountry fault detection Two instances of distance protection available in the same IED for applications like back-up for parallel line or one with conventional inputs and the other with sampled values or more zones Integrated PMU functionality & control in line protection IEDs High speed, easy to use, enabling digital substation Configuration of earlier solution Configuration of new solution June 30, 2017 Slide 14

15 Line protection Customer benefits RED670 High speed line differential protection Sub-cycle operating times For applications up to 2-3 ends without in-zone transformers Line data communication module (2Mbps) supports up to 9 analog & 192 binary, cost savings in double CB applications Existing line differential protection For applications up to 5 ends w/wo in-zone transformers Line data communication module (64kbps or 2Mbps) Back-up protection including high-speed distance backup Integrated PMU functionality & control in line protection IEDs High speed, easy to use, enabling digital substation June 30, 2017 Slide 15

16 Railway applications Customer benefits RER670 RER670 supports 2-phase railway transmission protection, control and monitoring applications Line, transformer, control functionality Supported frequencies 16,7/50/60Hz Supports IEC and IEC/UCA LE Relion series for Railway applications June 30, 2017 Slide 16

17 Integrated PMU functionality Customer benefits PMU in protection & control IEDs In addition to the station oriented PMU device RES670, bay oriented applications are supported Integrated PMU functionality supported in: REC670 Bay control RED670 Line differential protection REG670 Generator protection REL670 Line distance protection RET670 Transformer protection Supports future smart grid topologies in a cost effective way PMU packages REC670 RED670 REL670 REG670 RET670 SYNCHREP 8 Phasors Cost effective solution for wide area monitoring SYNCHREP 16 Phasors SYNCHREP 24 Phasors June 30, 2017 Slide 17

18 Transformer monitoring Customer benefits RET670 and REC670 Transformers being a critical asset need to be monitored for temperature rise and loss of its insulation Severe thermal stresses causing early aging of the transformer thereby expensive maintenance Condition monitoring of transformers now available in RET670 and REC670 Monitoring of top oil temperature, hot spot temperature, winding temperature and loss of insulation life Applicable for 1ph/3ph, 2wdg/3wdg, ABB/Non-ABB Quantities can be measured/calculated, thereby few sensors Note: Requires transformer data that is normally available in short-circuit type test report Condition monitoring of assets and plan maintenance June 30, 2017 Slide 18

19 Relion 670 and 650 series Positioning of Relion 670 Positioning of Relion 650 The power of one solution for protection and control The power of one solution for ready-to-use protection and Flexible control Pre configurations, Customized Meets the most common requirements of protection and control for transmission and sub-transmission networks Three different hardware casings (1/1, ¾ and ½ 19 ) Single breaker applications Multiple objects Few configurations Advanced protection and control features Always pre-configured Busbar: Centralized low-impedance for 6 zones, 24 bays Few options Lines: High speed distance and differential One hardware casing (½ 19 ) Control: Control for entire 1½ CB diameter Pre-made applications for all application areas Generator: Complete generator & step up transformer Transformer: 2-3wdg, phase-shifting, voltage regulation Phasor measurement: standalore or integrated in P&C IEDs Use the best fit for your protection, control & monitoring requirements June 30, 2017 Slide 19

20 Relion 670 and 650 series Customer benefits Improved ingress protection class Closed box Can deploy IED in harsher environments, improves safety Class IP40 from top, bottom, sides Class IP54 from front (optional) Conformal coated electronics Coating of electronics improves the overall reliability of the IED Extends working life These will go a long way in contributing to overall quality and durability in harsh environmental conditions Hardening to handle harsher environment June 30, 2017 Slide 20

21 Relion 670 and 650 series hardware Features and customer benefits Mechanics Conformal coating Numerical processor module Closed box with higher ingress protection Class IP40 from top, bottom, sides Class IP54 from front (optional) Can deploy IED in harsher environments, improves safety and reliability All electronic modules are conformal coated for higher reliability especially in harsher environment Extends working life of the IED A new powerful communication & processor module is introduced Enabler for higher performance and to deploy complex applications in the IED June 30, 2017 Slide 21

22 Relion 670 and 650 series hardware Features and customer benefits Ethernet SFPs with LC connectors Additional OEM* module for Ethernet ports 5 and 6 Line data comm. module supporting 2Mbps* /64kbps Industry standard way for communication Only approved ones will work Allows easy connectivity to Ethernet switches in SA applications Number of Ethernet ports can be easily expandable In applications where more than 4 Ethernet ports are needed an addition OEM will must to be ordered Similar SFPs and optical LC connectors Can be configured as independent or redundant [HSR, PRP] port pairs Supports PTP time synchronization Shall be specified at ordering Supports 12 channels of C37.94 protocol for higher data transfer 2 Mbps enables transfer of 9 analogs and 192 Booleans simultaneously June 30, 2017 Slide 22 * Only for Relion 670 series

23 Relion 670 and 650 series Customer benefits High flexibility in Relion 670 series I/O density - The different casing variants allows for a high number of I/O modules in a wide combination Function options - A large library of functions that can be ordered based on the application Modularity - The hardware, application functions and communication protocols are harmonized across the series Learn once and apply across the series Offers the highest I/O density available in the market Max I/O modules Relion 670 series 3/8/14 * Analog inputs Binary inputs Binary outputs ma inputs 6 24 * depending on case size and terminal type June 30, 2017 Slide 23

24 Enabling digital substations Built for connectivity Ethernet Redundancy Time sync Configuration Up to 6 (4+2) Ethernet ports in Relion 670 series, 4 Ethernet ports in Relion 650 series Easily extended (SFP, small form-factor pluggable) IEC PRP and/or HSR Configurable per port pair (i.e. max 3 redundant pairs with 6 ports) IEC/IEEE , PTP Precision time protocol to synchronize the system with high accuracy Easy configuration with great overview New tool component in PCM600 for Ethernet, ports and services configuration Built to serve your needs June 30, 2017 Slide 24

25 Flexible communication Configure the IEDs for your need Earlier releases of Relion 670 and 650 Up to 2 Ethernet interfaces IEC on only one interface When using IEC/UCA LE in Relion 670 no option to use PRP Only possible to run IEC/UCA LE on one interface Only PRP available as redundancy protocol Only one routable network through one gateway No IEC/UCA LE in Relion 650 series Now in Relion 670 and 650 version 2.2 Up to 6 Ethernet Interfaces for 670 and, up to 4 in 650 Any protocol on any interface All protocols on all interfaces Configure up to 8 MU streams on Relion 670 and 4 streams on Relion 650 Redundancy supported for station bus and process bus at the same time Use IEC/UCA LE together with GOOSE on process bus Configure your redundant interfaces All protocols on all interfaces Select PRP or HSR Configure up to 6 routes/gateways IEC/UCA LE in all Relion 650 series version 2.2 Satisfying customers needs June 30, 2017 Slide 25

26 Defense in depth Configure the services you need New tool in PCM600 to secure the IED The new Ethernet Configuration tool in PCM600 allows for efficient engineering: Configure access points Give IP addresses and network masks Redundancy modes (PRP/HSR/none) Select services per Ethernet access point Reduce your attack surface June 30, 2017 Slide 26

27 Easy configuration of networks Enabling digital substations Configure IEC MU The Ethernet configuration tool can also be used to configure IEC Merging Units. The IEC subnetwork configuration is shown in the Ethernet tool. Configure which access point is used for receiving a particular IEC/UCA LE stream Efficient engineering June 30, 2017 Slide 27

28 Easy configuration of networks Enabling digital substations Configure routes Earlier Relion 670 and 650 IEDs have only allowed one gateway for routing traffic from the subnetwork of the IED to another subnetwork. With Relion 670/650 series version 2.2 we now allow up to 6 routes. Efficient infrastructure support for a) Interstation communication b) Station to station communication c) Station to office communication Built for your network June 30, 2017 Slide 28

29 Troubleshooting help With hints and undo possibilities To help the user with common configuration mistakes and to give solutions to common problems, the IED now have a Hints menu Typical hints can be Incorrect configuration of time synchronization Invalid reference channel detected IEC/UCA LE data is substituted Before doing a major change of your configuration, save a restore point of your IEDs state. This possibility is now added to the Maintenance menu of the IED. - Store up to two restore points June 30, 2017 Slide 29

30 Relion 670 and 650 series Functional enhancement and benefits Increased amount of binary disturbance recording channels Binary Channels All products in 670 and 650 series now come with 352 binary channels as standard Disturbance recorder Now harmonized to cover 40 analog channels (30 measured + 10 derived) and 352 binary channels as standard Harmonized across the series and this increase will help to capture the most important events in applications. Also capture a large amount of data during a disturbance for proper analysis. Efficient monitoring of your power system June 30, 2017 Slide 30

31 Simplified engineering GOOSE engineering made easier Easy GOOSE Engineering In previous versions of PCM600 and Relion IEDs, GOOSE engineering had to be done either through An external system tool (IET600) IEC configuration tool (PCM600) Now we ve added a third alternative Within PCM600 application configuration tool Works only between ABB devices June 30, 2017 Slide 31

32 Agenda Introduction Evolution continues Relion 670/650 series portfolio What s new in Relion 670/650 series version 2.2 Applications Hardware System features The best choice for your needs Digital substation Migration path and Life-cycle status Summary June 30, 2017 Slide 32

33 Pre-configurations Helping you to get a quick start Highlights The most common preconfigurations from the past remain, updated to version 2.2 A few new pre-configurations are introduced both for 670 and 650 series High speed distance in all line protection applications in 670 series For line differential protection, both new and earlier ones are made available Benefits As it confirms that these are beneficial they are continued to give users a quick start and help with correct selection, usage Helps users to select, configure and deploy configurations quickly and correctly. E.g. line protection combined with PMU The high speed distance protection brings key benefits to users in terms of performance and usability and is promoted The most optimal solutions based on customer applications. E.g., depending on number of remote ends or in-zone trafo June 30, 2017 Slide 33

34 Pre-configurations Helping you to get a quick start Highlights Combined phasor monitoring functionality included in some configurations No special 9-2 products, IEC/UCA LE applications can be supported in pre-configurations and customized 650 series pre-configurations with more backup protection All pre-configurations available in IEC Ed1 & Ed2 All pre-configurations available as IEC variants Benefits We expect to see more bay-oriented PMU applications in the IEDs and these help configure quickly and correctly Easier and faster selection from preconfigurations which now support process bus applications, more possibilities A more complete application for main & BU protection Ready to use and enables faster deployment Common harmonized solution which can be adapted June 30, 2017 Slide 34

35 Pre-configurations Relion 670 series Summary of pre-configurations per application Busbar protection REB670 Bay control REC670 A20 A31 B20 B21 B31 A30 B30 C30 D30 Low impedance busbar protection for 2zones, 3ph, 4bays Single breaker, double busbar Low impedance busbar protection for 2zones, 3ph, 8bays Double breaker double busbar Low impedance busbar protection for 2zones, 1ph, 12bays, single busbar Low impedance busbar protection for 2zones, 1ph, 12bays, double busbar 1½ breaker diameter Single breaker, double busbar with PMU functionality Low impedance busbar protection for 2zones, 1ph, 24bays, double busbar No changes from earlier offering. For 6 zone applications, an application example will be available Integrated PMU is new. For bus-coupler, use customized (modify existing). No changes to others. June 30, 2017 Slide 35

36 Pre-configurations Relion 670 series Summary of pre-configurations per application Line differential protection RED670 Line distance protection REL670 B33 A42 B42 C42 A41 A42 B42 D42 Multi-breaker, 1ph/3ph tripping, 2-5 line ends, in-zone transformer Single breaker, 1ph/3ph tripping, 2-3 line ends, high speed line differential protection Single breaker, 1ph/3ph tripping, high speed line distance protection, isolated or high impedance earthed systems Single breaker, 1ph/3ph tripping, high speed line distance protection Multi-breaker, 1ph/3ph tripping, 2-3 line ends, high speed line differential protection Single breaker, 1ph/3ph tripping, 2-3 line ends, high speed line differential with back-up distance protection Multi breaker, 1ph/3ph tripping, high speed line distance protection Single breaker, 1ph/3ph tripping, high speed line distance protection with PMU functionality Configurations prepared for 1ph/3ph tripping. PMU functionality is an option Integrated PMU is new. Configurations prepared for 1ph/3ph tripping. June 30, 2017 Slide 36

37 Pre-configurations Relion 670 series Summary of pre-configurations per application Generator protection REG670 Transformer protection RET670 A20 B30 C30 A10 B30 B40 A25 Generator differential and back-up protection Transformer back-up protection Generator differential and generator/transformer back-up protection Generator/transformer differential and backup protection No changes from earlier offering. PMU functionality is an option Multi-breaker, 2 winding transformer differential protection Multi-breaker, 3 winding transformer differential protection Voltage control / Transformer tap control Phasor monitoring unit RES670 A20 B20 PMU application for single breaker, 3 bays PMU application for double breaker, 6 bays No changes from previous offering. Multi-breaker applications can easily be adapted for single breaker. PMU functionality is an option June 30, 2017 Slide 37

38 Pre-configurations Relion 650 series Summary of pre-configurations per application Application High impedance busbar protection Single breaker, double busbar, bay control Single breaker, 1ph/3ph tripping, 2-3 line ends, line differential with back-up distance protection Single breaker, 1ph/3ph tripping, solidly earthed Single breaker, 1ph/3ph tripping, isolated/high impedance earthed Single breaker, 1ph/3ph tripping, back-up protection 2 winding transformer differential protection 3 winding transformer differential protection Relion 650 series REB650-A03 REC650-A02 RED650-A11 REL650-A11 REL650-A12 REQ650-B11 RET650-A01 RET650-A05 June 30, 2017 Slide 38

39 Backup protection in Relion 650 difference between 2.1 and 2.2 IEC ANSI Function description NEW NEW REB650-A03 REC650-A02 RED650-A11 REL650-A11 REL650-A12 REQ650-B11 RET650-A01 RET650-A05 Current protection Voltage protection Freq protectio n PHPIOC 50 Instantaneous phase overcurrent OC4PTOC 51_67 Directional phase overcurrent EFPIOC 50N Instantaneous residual overcurrent EF4PTOC 51N/67N Directional residual overcurrent NS4PTOC 46I2 SDEPSDE 67N Sensitive directional residual overcurrent and power LCPTTR/LFPTTR 26 Thermal overload TRPTTR 49 Thermal overload CCRBRF 50BF Breaker failure STBPTOC 50STB Stub CCPDSC 52PD Pole discordance BRCPTOC 46 Broken conductor check VRPVOC 51V Voltage restrained overcurrent UV2PTUV 27 Two step undervoltage OV2PTOV 59 Two step overvoltage ROV2PTOV 59N Two step residual overvoltage OEPVPH 24 Overexcitation LOVPTUV 27 Loss of voltage check SAPTUF 81 Underfrequency SAPTOF 81 Overfrequency SAPFRC 81 Rate-of-change of frequency GF CVGAPC General current and voltage June 30, 2017 Slide 39 Included New (added in 2.2 compared to 2.1) Removed (included in 2.1 but not 2.2)

40 Agenda Introduction Evolution continues Relion 670/650 series portfolio What s new in Relion 670/650 series version 2.2 Applications Hardware System features The best choice for your needs Digital substation Migration path and Life-cycle status Summary June 30, 2017 Slide 40

41 Relion 670 and 650 series Enabling digital substations Station bus Process bus Between stations IEC Edition 1 and Edition 2 Reliable and redundant Up to 6 Ethernet ports for Station Bus, Process Bus in either single/redundant (PRP, HSR) PTP according to IEC/IEEE (IEEE 1588) IEC Supports both IEC/UCA LE and GOOSE Digital integration in the entire system Supports 8 SV streams in most products PTP according to IEC/IEEE (IEEE 1588) Line differential communication Reliable and efficient Can supports up to 9 analogs and 192 binary signals in Relion 670 series Example of application on a three-terminal line with ½ breaker arrangements June 30, 2017 Slide 41

42 Relion 670 and 650 series Enabling digital substations Support for various digital substation architectures Up to 6 Ethernet ports that can easily be configured for MUs Typical solutions Station bus is with redundancy PRP Process bus with redundancy HSR Time sync via PTP IEC/IEEE (Legacy PPS) Connectivity to 3rd party IEDs/sensors/MUs using standardized methods: Communication: IEC , IEC/UCA LE Time sync: IEC/IEEE (PTP) Redundancy: IEC (link redundancy PRP/HSR) Easily adaptable to most digital substation topologies Service 670/650 MMS GOOSE Sampled values PTP Server Publisher, subscriber Subscriber Ordinary, boundary, transparent IEC services June 30, 2017 Slide 42

43 Relion 670 and 650 series Enabling digital substations Time synchronization With PTP one single clock is sufficient. The whole system synchronizes using the Best Master Clock (BMC) 670/650 series act as Boundary Clocks (BC) and can thereby accurately synchronized several network segments, typically Station bus and Process bus 670/650 series can be Ordinary Clocks (OC) on each port, thereby can be a Grandmaster in a system 670/650 series are also Transparent Clocks (TP) to meet the requirements of IEC/IEEE with max 1µs for 15 hops in HSR network Elimination of IRIG-B or GPS modules in 670/650 series leads to significant cost savings Accurate synchronization, cost effective solution June 30, 2017 Slide 43

44 Relion 670 and 650 series Enabling digital substations Application modeling Clear and logical separation of functionality Process level LNs (, S, T) are moved out of bay level protection and control IEDs Avoid duplication, keep it simple Acquire once, distribute to several Supports cost effective engineering, simulation and testing IEC compliant, testing, simulation possibilities June 30, 2017 Slide 44

45 Relion 670 and 650 series Enabling digital substations Conditional blocking With conditional blocking, only dependent functions are blocked instead of everything Increased availability by providing protection, control, monitoring as much as possible based on quality of inputs In the example here: with loss of NCIT input from one side of the transformer, only dependent functions are blocked (greyed out) E.g., OC4PTOC.Beh=Blocked Increased availability, cost effective June 30, 2017 Slide 45

46 Relion 670 and 650 series Enabling digital substations Conditional blocking With conditional blocking, only dependent functions are blocked instead of everything Increased availability by providing protection, control, monitoring as much as possible based on quality of inputs In the example here: with loss of NCIT input from one side of the transformer, only dependent functions are blocked (greyed out) E.g., OC4PTOC.Beh=Blocked Increased availability, cost effective June 30, 2017 Slide 46

47 Relion 670 and 650 series Enabling digital substations Conditional blocking With conditional blocking, only dependent functions are blocked instead of everything Increased availability by providing protection, control, monitoring as much as possible based on quality of inputs In the example here: with loss of NCIT input from one side of the transformer, only dependent functions are blocked (greyed out) E.g., OC4PTOC.Beh=Blocked Increased availability, cost effective June 30, 2017 Slide 47

48 Relion 670 and 650 series Enabling digital substations Application engineering Configuration at Bay level controller Bay level Interfaces to existing functions are kept using pre-defined GOOSE receive and proxy functions GOOSE receive any other general signals from process level Analog data through IEC/UCA LE Process level GOOSE receive protection trips/reclose or control commands Clear clean configurations Configuration at Process I/O device SAM600 June 30, 2017 Slide 48

49 Agenda Introduction Evolution continues Relion 670/650 series portfolio What s new in Relion 670/650 series version 2.2 Applications Hardware System features The best choice for your needs Digital substation Migration path and Life-cycle status Summary June 30, 2017 Slide 49

50 Migration path and Life-cycle status Upgrades & migration Hardware upgrade from previous versions of 670/650 series to version 2.2 is not supported. A new IED box will be needed. Application migration in PCM600 is supported through all versions Life-cycle status Relion 670 series Limited Classic Active Active Active TBA In general the closer one is to the final version, the application migration is better Migrating a configuration of will result in less loss of data compared to a migration from Relion 650 series Limited Active Limited Active Active TBA PCM600 version 2.8 with HF2 is required for 670/650 series version 2.2 June 30, 2017 Slide 50

51 Agenda Introduction Evolution continues Relion 670/650 series portfolio What s new in Relion 670/650 series version 2.2 Applications Hardware System features The best choice for your needs Digital substation Migration path and Life-cycle status Summary June 30, 2017 Slide 51

52 Summary Key benefits The Relion 670/650 series is a key enabler for digital substation solutions thereby bringing a change to how Protection & Control has been done Significant improvement in the offering for line protection, busbar protection IED supports process bus as well PMU functionality, offering both advanced and yet cost-effective functionality For marketing and technical material visit Please contact us for more info joseph.menezes@se.abb.com and krister.hagman@se.abb.com The most advanced protection & control IEDs for your power system applications June 30, 2017 Slide 52

53