Constant Voltage LED Power Supply 1-10V Dimmable

Transcription

1 Constant Voltage ED Power Supply 1-10V Dimmable 1-10V Dimmable Product description This type of dimmable power supply is an exclusively designed stabilized power supply for ED lamp. With constant voltage (CV) technology, it is suitable for constant voltage lamps (V DC) connected in parallels. The output voltage duty of the converter could be dimmed between 10%-100% by 1-10VDC dimmers. The built-in protection circuit will shut down the power supply in case of such faults as: open circuit, short circuit, over load or over temperature. The power supply will restart automatically after fault correction. Standards: Characteristics: E E E61547 E55015 E E E62384 E693 U8750 U1310 FCC15A Universal input voltage(ac v) Metal housing and potted by glue, comply with IP66 Suitable for class I luminaires SEV/U 8750 class 2 output Open circuit short circuit over load and over temperature protection Auto restart after fault conditions removal o load power consumption 0.5W Efficiency 90% AC230V full load Page: 1 of 5

2 Specifications Model SD96-VC-U1 Output Input Protection Ambient and ife Other turn on time(s) output power(w) output votage(v) output voltage tolerance ripple voltage(mv) working current range(a) dimming interface dimming range rated supply voltage(vac) voltage range(vac) line frequency(hz) input current(ma) efficiency average efficiency no load power consumption(w) power factor inrush current(ipk) over voltage protection short circuit protection over temperature protection automatic restart over load protection surge capacity Ta( ) Tc max.( ) Storage Temperature( ) ambient humidity range nominal life-time(hrs) weight(g) dimensions ( W H)(mm) casing material housing colour type of protection 3 3 protection class /-5% 1300(Vp-p) V 10%-100% / %.4% 0.5 5A/60us -: 1KV %...% ot condensing @Tc= Metal Silvery IP20 Class2 ote 1. Tolerance:includes set up tolerance, line regulation and load regulation. 2. Tested at 120Vac input. 3. Tested at full load.refer to""power Factor"" and ""EFFICIET""curve graphs. 4. Calculate the model s average efficiency for each test voltage by testing at 100%, 75%, 50%, and 25% of rated current and then computing the simple arithmetic erage of these four values. 5. All parameters OT specially mentioned are measured at nominal voltage input, rated load and 25 of ambient temperature. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. Page: 2 of 5

3 Dimensions(mm/inches): 29.5(1-3/16 ) 40.5(1-9/16 ) 28(1-1/8 ) 210(8-1/4 ) 226(8-7/8 ) 1.5(9-1/2 ) Wiring diagram: DIMMABE ED POWER SUPPY (GRAY) (VIOET) 1-10VDC Dimmer/150KΩ (BACK) IPUT (BUE) DIMMABE ED POWER SUPPY (GRAY) (VIOET) SHE-B-96 PIR Sensor&1-10VDC Dimmer (BACK) IPUT (BUE) ED POWER SUPPY (BACK) IPUT (BUE) Page: 3 of 5

4 Electrical curves: 1.00 PF vs (230Vac) 1.00 PF vs (120Vac) PF PF EFFICIECY vs (230Vac) 90 EFFICIECY vs (230Vac) EFFICIECY(%) EFFICIECY(%) note For constant current power supply,"" means the percentage of the maximum rated output voltage. For constant voltage power supply,"" means the percentage of the maximum rated output current. Page: 4 of 5

5 Sales & Technical Support: Self Electronics Co.,td. Add: o Ju Xian Road, ingbo Hi Tech Park, ingbo, China Tel: , (For English Assistance) (For Chinese Assistance) Fax: Self Electronics Co.,td.,Shenzhen Office Add: Room2007,Xinglang Xuan,Xinghe Mingju,Fuming Road,Futian District,Shenzhen Tel: , Fax: SEF EECTROICS FRACE BRACH OFFICE Add:12-14 rue Raymond Ridel, a Garennes Colombes Tel: 0033 (0) saleseu@self-electronics.com SEF EECTROICS GERMAY GMBH Add:August-Horch-Str. 7,51149 Koeln Tel: Fax: saleseu@self-electronics.com *Due to continuous improvements and innovations,specifications are subjected to change without notice. Page: 5 of 5