Output Power. Parameter Min. Typ. Max. Unit Remark. Parameter Min. Typ. Max. Unit Remark
|
|
- Darlene Griffin
- 5 years ago
- Views:
Transcription
1 PISE-A240A (Pb-Free) 240W Selectable Output Power 180V - 310V / 0.5A - 0.7A - 1.0A / 240W Features Dimmable Type : 1-10 Dimming Input Cable : Double or Reinforced Insulation Mechanical Outline (Metal Case) x 95 x 50mm Selectable Output Current (0.5A / 0.7A / 1.0A), Constant Voltage / Constant Current Control, High Efficiency & Active Power Factor Correction / Protection : UVP, OVP, SCP, OTP and OCP UL8750, UL1012, EN61347 Output Safety Certifications Approved Critical Specifications Input Voltage Output Voltage Output Current Output Power Efficiency THD Com. Surge /0.7/1.0A Max. 240W Up to 93% < 20% 6kV 4kV > 0.9 Diff. IP66 PF Input Specifications Input Voltage VAC Input Current Vin=108V / Max. Load Input Frequency Hz Power Factor Max Output Load 240AC/50% Output Load ) Output Specifications Output Voltage VDC Output Current / 0.7 / A Selectable Output Current Output Dimming Current Range Selectable Output Current 0.5 / 0.7 / 1.0A Output Current Tolerance SOC 1.0A Output Ripple Current SOC 1.0A Start-up Time ms Output Power Tolerance VAC - 277VAC, SOC 1.0A 1
2 Protection Functions Output Over Voltage Protection VDC Latch-off after 3 times Auto Recovery(Restart Driver when AC Power Off/On again) Output Short Circuit Protection A Auto Recovery Internal Over Temp. Protection (Tc) Maintaining 10% 100 (NTC 110 ) External Over Temp. Protection (Ta) Maintaining 10% 85 Reliability Specifications Life Time Tc= Tc=80 Failure Rate Tc=80 (Ta=55 ) MTBF - 1,300 - Tc=80 Environmental Specifications The life time has been calculated based on Telcordia Issue2 (Ground Benign, Controlled,12Hrs working hours per day) Operation Temperature Ta - - Tc Storage Temperature Ta Humidity % Relative humidity for operation % Relative humidity for storage Standards Parameter Condition Remark Safety Standards EMI / RFI Standards To be designed to meet the requirements as follows ; - UL 8750, UL EN :2008;A1 - EN :2006 To be designed to meet the requirements as follows ; - Class B verification - FCC part 15, Class B verification\ - EN55015:2006+A1:2007+A2; EN :2006+A1:2009+A2: EN :2008 Protection Type : Manual Resetting Type 2
3 Life Time vs. Case Temperature Curve Power Factor Characteristics Performance graphs are tested at Ta=25 3
4 Efficiency Characteristics 4
5 Dimming Control (1-10V Dimming) 100% Output current vs. Dimming voltage 80% 60% 40% 20% 0% Constant Power Control (Iout vs Vout Curve) Iout [ma] Vout [V] Iout vs NTC Temp. (OTP) Iout [%] External Internal Estimated Temp. [ ] 5
6 Isolation Isolation (V) Mains Input LED Output NTC/Dim Input Current Selection Input Metal Housing Mains Input NA LED Output 4000 NA NA NA 4000 NTC/Dim Input 4000 NA NA NA 4000 Current Selection Input 4000 NA NA NA 4000 Metal Housing NA Leakage Current Leakage Current < 0.5 MIU (Peak 0.7) The leakage current must be measured again on the luminaire side. Inrush Current Information Ipeak Input Voltage Ipeak 50% of Ipeak 50% of Ipeak 120VAC 58A 240us 230VAC 110A 240us 277VAC 132A 237us Maximum Number of Drivers per MCB Item Max. Number of Drivers Input Voltage [VAC] MCB B type 10A MCB B type 13A MCB B type 16A MCB B type 20A MCB B type 25A
7 Output Current Setting L N Non-Programmable Driver VLED + VLED - Dim+ Comm (DIM-) Rset(Wire A) Rntc 5Vs(Wire B) SGND(Wire C) Wire Connection Output Current RSET 5Vs SGND 1000mA Open Open Open 700mA Short Short Open 500mA Short Open Short Functional GND Connection Functional GND is able to be connected with one of four holes which are located in each corner of the metal case. Sawtooth washer is recommended to be used in order to strengthen mechanical contact between the metal case and functional GND. Guidelines for Driver Wire Length Model Output Wires (LED+, LED-) Control Wires (DIM, COMM, NTC, 5V, RSET) PISE-A240A Max. 10 meter Max. 0.5 meter Maximum output cable length is limited by EMI and cross-sectional diameter. All connections must be kept as short as possible to ensure good EMI performance. 7
8 Mechanical Outline 1. Case Dimension 2. Connector Wiring Diagram Input Cable(18AWG) NEUTRAL LINE Output Cable(18AWG) VLED+ VLED- DIM+ COMM(DIM-) NTC RSET 5Vs SGND Input WHITE (NEUTRAL) BLACK (LINE) LED Driver RED (VLED+) BLUE (VLED-) VIOLET (DIM+) GRAY (COMM) BLK/WHT (NTC) Output LED Array Dimming Wire OTP Housing YELLOW (RSET) VIO/WHT (5Vs) BLU/WHT (SGND) Selectable Output Current Wire 8
9 Datasheet Revision History Change Date Rev. No. Description of Change Remark 2014/11/ Initial Release 2015/05/ Added below information, - Electrical Test Result (Efficiency, PF, Leakage etc.) 2015/11/ Updated test conditions 2016/03/ To update maximum number of drivers per MCB 9
UL8750, UL1012, EN61347, BIS R Output Safety Certifications Approved. Output Power. Parameter Min. Typ. Max. Unit Remark
PISE-A040A (Pb-Free) 40W Selectable Output Power 38V - 77V / 0.35A - 0.5A - 0.7A / 40W Features Dimmable Type : 1-10 Dimming Input Cable : Double or Reinforced Insulation Selectable Output Current (0.35A
More informationFlat. PIFN-C072B Flat 75W LED Driver. Features. Electrical Specifications. Input Specifications 1 / 8 18V - 23V / 2.00A - 3.
PIFN-C072B Flat 75W LED Driver 18V - 23V / 2.00A - 3.26A / 75W Features Dimming Method: 0-10V Dimming (0V=10%) Mechanical Outline Constant Current Control (Metal Case) Adjustable Output Current - 424 30
More informationMax. Input Power (W) Input Current (Arms) / 100 <15% >0.9. Dimming
Product Overview Input Voltage (Vac) Output Power (W) Output Voltage Range (V) Output Current (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush
More informationMax. Input Power (W) Input Current. (A pk/50%-µs) Dimming Method. 1-10V Isolated DALI
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) 75 80 ~ 152 0.350 0.70 > 92% 80 C 1 2 0 Input Current 2 0 0 2 4 0 Max. Input Power (W) 2 7 7 85 Inrush Current
More informationLED55WPG Programmable LED Driver
Dimmable Constant Current Rev 8-9-7 Electrical Specifications Input Voltage Range: Frequency: Power Factor: Inrush Current: Input Current (Max): -77 Vac Nom. (8-35 V Min/Max) 5/6 Hz Nom. (47-63 Hz Min/Max)
More informationMax. Input Power (W) Input. (Arms) 277V. Vin 41/ 100. Dimming Method. 1-10V Isolated UL Class 1 and Class 2 Wiring. Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max
More informationXitanium Highbay LED Drivers Dimmable (1-10V) Independent
Xitanium LED driver Datasheet Xitanium Highbay LED Drivers Dimmable (1-10V) Independent Xitanium Dim 100W 1.05A 1-10V 230V I165C LED-based light sources are an excellent solution for highbay industrial
More informationS025W-056C W Programmable LED Drivers
Rev 12-14-17 Electrical Specifications Maximum Power: 25W Typical Efficiency: 88% Input Voltage Range: 1-277 Vac Nom. (108-305 V Min/Max) Frequency: 50/ Hz Nom. (47-63 Hz Min/Max) Power Factor: 0.90 @
More informationD10CC150HV10F. HRV ( V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control.
HRV (347 480V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control Performance Input Voltage 347 ~ 480 Vac ± 10% Input Current Max 0.48 /347V 0.34/480V Input
More informationXitanium Highbay LED Drivers Dimmable (1-10V) Independent
Xitanium LED driver Datasheet Xitanium Highbay LED Drivers Dimmable (1-1V) Independent Xitanium Dim 22W 1.5A 1-1V 23V I24C LED-based light sources are an excellent solution for highbay industrial applications.
More informationMax. Input Power (W) Input Current (Arms) / 83 <15% Dimming. Enclosure
Product Overview Input Voltage (Vac) Output Power (W) Output Voltage Range (V) Output Current (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush
More informationEnvironmental. Electrical Specifications at 25 O C. Programmable Maximum Value. Factory Default
25 Watt - -56-PC1300-RD FLICKER FREE LED DRIVER WITH 0-10V DIMMING & 12V AUX Model: Series Environmental Drive Mode: Flicker Free Programmable Constant Current Technology: PFC Corrected 2-Stage Switch
More informationElectrical Specifications
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) TH D @ Max Load (%) Power Factor @ Max Load
More informationEnvironmental. Electrical Specifications at 25 O C. Programmable Maximum Value. Factory Default
LED Optimized Drivers 55 Watt - -55-PC1500-RD FLICKER FREE LED DRIVER WITH 0-10V DIMMING & 12V AUX Model: Series Environmental 55W Drive Mode: Flicker Free Programmable Constant Current Technology: PFC
More informationXitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver. Xitanium 40W 0.70A 0-10V INT-J XI040C070V056CNJ1. Dimensions.
Philips Advance Xitanium LED Driver Features 3 drive current options available 700mA, 1050mA, 1200mA, with UL Class 2 output 0-10V dimming Compact housing Benefits Flexibility of design via multiple drive
More informationFlat. PITK-W025B Flat 23W LED Driver. Features. Specification Summary. Input Specifications 1 / V / 0.57A / 23W. Mechanical Outline
PITK-W025B Flat 23W LED Driver 25-40V / 0.57A / 23W Features Constant Current Control Fixed Output Current Active Power Factor Correction Protection : OVP, SCP KS C 7655 Safety Certifications Approved
More informationEnvironmental. Electrical Specifications at 25 O C. Programmable Maximum Value
Model: LP Series Environmental LP Drive Mode: Flicker Free Programmable Constant Current Output Voltage: 12-56VDC Output Current: Set by resistor value (Rset) or GUI Programmable Output Current (POC):
More informationProven robustness and reliable electronic driver design. Robust design; capable of withstanding harsh outdoor conditions.
Xitanium LED driver Datasheet Xitanium Outdoor LED Drivers Dimmable (1-10V) Independent Xitanium Dim 250W 0.70A 1-10V 230V I220C LED-based light sources are an excellent solution for outdoor environment.
More informationXitanium Highbay LED Drivers Dimmable (1-10V) Independent
Xitanium LED driver Datasheet Xitanium Highbay LED Drivers Dimmable (1-10V) Independent Xitanium Dim 100W 1.05A 1-10V 230V I165 LED-based light sources are an excellent solution for highbay industrial
More informationTypical Efficiency (2) 350 ma 90 ~ 305 Vac 57~114Vdc 160 W 92.0% EUC-160Q035DT(ST) (3 ) Parameter Min. Typ. Max. Notes
EUC160QxxxDT(ST) 160W Fourchannel Constant Current IP67 Driver Features Ultra High Efficiency (Up to 92%) Four Channels Output Active Power Factor Correction (0.99 Typical) Constant Current Output Input
More informationLL1x80-CR-DA. 80 W Dimmable DALI-2 LED driver. 80 W V 0 / Hz. Functional Description. Mains Characteristics
80 W Dimmable DALI-2 LED driver Product code: 5559 80 W 220 240 V 0 / 50 60 Hz DALI-2 certified LED driver, 1-100 % dimming range Filtered hybrid dimming technology Very high efficiency up to 9 Low ripple
More informationLED Driver Linear / area dimming
Driver LC 35W 7mA -1V UNV sl ADV ADVANCED series Product description Built-in constant current For dry and damp location Max. output power 35 W Up to 85 % efficiency Nominal life-time up to 5, h For luminaires
More informationOutput Voltage Range. Max. Output Power. (4) 90~305 Vac 127~300 Vdc 8 ~54 Vdc 40 W 89.5% LUD-040S150BSF
LUD040SxxxBSF Rev. C 40W Programmable IP20 Driver with DALI Features Dimtooff with Standby Power 0.5 W Alwayson Auxiliary Power: 12Vdc, 200mA Thermal Sensing and Protection for LED Module Full Power at
More informationElectrical Specifications
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Tem p. ( C) Input Current Max. Input Power (W) Inrush Current (A pk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load
More informationConstant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
More informationTypical Efficiency (2) 0 ~ 12.5 A 150 W 90.0% EUV-150S012DTA(STA) 0 ~ 6.25 A 150 W 90.5% EUV-150S024DTA(STA) (4)
EUV150SxxxDTA(STA) Features High Efficiency (Up to 90.5%) Isolated 010V Dimmable(DTA models) NonDimmable (STA models) Deep Dimming down to 0.1% Constant Voltage PWM Output Frequency up to 1.5kHz DimtoOff
More informationOutput Voltage Range. Max. Output Power. (4) 90~305 Vac 127~300 Vdc 16~78 Vdc 60 W 90% LUD-060S110BS2
LUD060SxxxBS2 Rev. B 60W Programmable IP20 Driver with DALI Features Dimtooff with Standby Power 0.5 W AlwaysOn Auxiliary Power: 12Vdc, 200mA Thermal Sensing and Protection for LED Module Full Power at
More informationSL-LU US Type TL SL-LU US Class P
ProductDataSheet Rev.1.0 2017.08 15 1# LED Driver Outdoor 55W Driver SL-LU1425501US Type TL SL-LU1425502US Class P Constant Current LED Driver High Efficiency Constant Current LED Driver With Active Power
More informationXitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver XITANIUM 100W 2.30A INT-S XI100C230V042FNS1. Dimensions. Features.
Philips Advance Xitanium LED Driver XI100C230V042FNS1 Features UL Class 2 output, high drive current (2.3A) Available in both Fixed and Dimmable version Benefits Tailored specifically for various COB arrays
More informationLC35SE-DA W SELV Dimmable DALI-2 LED driver. 35 W V 0/ Hz. Functional Description. Mains Characteristics
35 W SELV Dimmable DALI-2 LED driver DALI-2 certified LED driver, 1-100 % dimming range SELV output protection for safety and flexibility in luminaires Amplitude dimming for the highest quality light output
More informationXitanium. Xitanium 150W 0.7A 230V Y. LED Driver. Datasheet
Xitanium LED Driver Datasheet Xitanium 150W 0.7A 230V Y LED-based light sources are an excellent solution for outdoor environment. They are long-lasting and require low maintenance. However, to get the
More informationMax. Output Power. Typical Efficiency (3) 0 ~ 25.0 A 300 W 91.5% 0.96 EBV-350S012SV 0 ~ 14.6 A 350 W 93.5% 0.96 EBV-350S024SV
Features High Efficiency (up to 93.5%) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: OCP, OVP, SCP, OTP Waterproof (IP67) SELV Output Suitable for Independent
More informationApplication Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationDRIVER BROWN (LED+) YELLOW (LED-) VIOLET (NTC) GREEN (SGND) GREEN (SGND) ORANGE (RSET2)
LED Driver Xitanium 25W 0.1-1.0A 36V 0-10V INT XI025C100V036DNMX Philips Advance Xitanium Downlight LED Drivers are designed to give OEMs ultimate flexibility. With wide operating windows, compact size
More informationLL1x150-CR-DA. 150 W Dimmable DALI-2 LED driver. 150 W V 0 / Hz. Functional Description. Mains Characteristics
150 W Dimmable DALI-2 LED driver DALI-2 certified LED driver, 1-100 % dimming range Filtered hybrid dimming technology Very high efficiency up to 96 % Low ripple and flicker (according to IEEE 1789) Suitable
More informationMax. Output Power. Typical Efficiency (1) 12 Vdc 249~ 528 Vac 0~10 A 120 W 91.5% ESV-150S012ST
Features Ultra High Efficiency (Up to 94.5%) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: SCP, OTP, OVP, OCP Suitable for UL Dry / Damp / Wet Location
More informationAFLEX MAGNITUDE 40W PROGRAMMABLE LED DRIVER QUICK SPECS FEATURES WIRING DIAGRAM ENCLOSURE DETAILS
MAGNITUDE L I G H T I N G DIM DOWN TO 0.1% DIMMABLE AFLEX E465183 40W PROGRAMMABLE LED DRIVER CLASS P CLASS 2 E4 65 18 3 The AFlex Series of Constant Current Programmable LED Drivers offers high efficiency,
More informationTypical Efficiency (2) Max. Output Power ma 176 ~ 305 Vac 260~400Vdc 420 W 94.0% 0.95 EBC-420S105DV(SV)
EBC420SxxxDV(SV) Features Ultra High Efficiency (Up to 94.0%) Constant Current Output 010V Dimming Control Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection: OVP, SCP, OTP Waterproof
More informationXitanium Outdoor LED Drivers Independent 1-10V
Xitanium LED driver Datasheet Xitanium Outdoor LED Drivers Independent 1-10V Xi LP 220W 0.3-1.05A S1 TWE I230 Philips Xitanium Lite Programmable LED drivers are value engineered to deliver a carefully
More informationXitanium Dim 100W 0.8A 1-10V 230V I175
Xitanium LED Driver Datasheet LED-based light sources are an excellent solution for outdoor environment. They are long-lasting and require low maintenance. However, to get the best out of the LEDs, these
More informationEnvironmental. Electrical Specifications at 25 O C E Output Constant Current
12 Watt - Model: Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 120 to 277VAC, 47-63Hz Number of Outputs: One Output Voltages:
More informationOutput Voltage Range. Max. Output Power
EBS120SxxxBTE Features Ultra High Efficiency (Up to 93.5%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module DALI/AC Dim/Timer Dimmable (3 Timer Modes)
More informationLC35SE-CC LOOP
35 W SELV Constant current LED driver Product code: 5748 35 W 220 240 V 0/ 50 60 Hz SELV output protection for safety and flexibility in luminaires Very low current ripple, complying with IEEE 1789 standard
More informationLC51SE-CC LOOP
51 W SELV Constant current LED driver Product code: 5740 51 W 220 240 V 0/ 50 60 Hz SELV output protection for safety and flexibility in luminaires Very low current ripple, complying with IEEE 1789 standard
More informationWithstands max. 320 VAC (max. 1 hour) *) Low frequency, LED load: Cree XP-G L LEDs. 350 ma 600 ma Fixed output 850 ma P Rated
35 W SELV Constant current LED driver Product code: 5732 35 W 220 240 V 0/ 50 60 Hz SELV output protection for safety and flexibility in luminaires Very low current ripple, complying with IEEE 1789 standard
More informationEnvironmental. Electrical Specifications at 25 O C E Output Constant Current
17 Watt - LD Series LD Series Model: LD Series Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 100 to 277VAC, 47-63Hz Number of
More informationXi LP 150W A SN 230V S240 sxt
Xi LP 150W 0.2-0.7A SN 230V S240 sxt Electrical input data Rated input voltage range 220... 240 Vac Performance Input voltage range 198... 264 Vac Operational Rated input frequency range 50... 60 Hz Performance
More informationLED Driver. Xitanium 63W V 1.50A 0-10V XI063C150V042CNS1. Specifications. Enclosure. Wiring Diagram. Input and output use lead-wires.
LED Driver Xitanium 63W 120-277V 1.50A 0-10V XI063C150V042CNS1 Specifications Input Voltage (Vrms) Power (W) Voltage (V) (A) Efficiency@ Max Load and 70 C Case Max. Long-lasting and low maintenance, LED-based
More informationOutdoor 200w Driver SL-L2282B002US
Data Sheet Rev 1.0 2016. 07. 18 1# LED Driver Outdoor 200w Driver SL-L2282B002US Constant Current LED Driver Features & Benefits Output Current Range: TYP 5.6 A ( Fixed current ) Output Voltage Range:
More informationOutdoor 25W Driver SL-LA US
Data Sheet Rev.1.0 2016. 7. 11 1# LED Driver Outdoor 25W Driver SL-LA7012502US Constant Current LED Driver Features& Benefits Output Current Range: 700mA Fixed Output Voltage Range: 18 ~ 36Vdc Output Power
More informationXitanium Outdoor LED Drivers Independent 1-10V
Xitanium LED driver Datasheet Xitanium Outdoor LED Drivers Independent 1-10V Xi LP 220W 0.3-1.05A S1 230V I230C Philips Xitanium Lite Programmable LED drivers are value engineered to deliver a carefully
More informationTypical Efficiency (2) Max. Output Power. 700 ma 160~305 Vac 30~60 Vdc 42 W 88% 0.95 EBC-042S105DV(SV)-0007
Features High Efficiency (Up to 88%) Constant Current Output 010V Dimmable Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection: OVP, SCP, OTP Waterproof (IP67) SELV Output Suitable
More information0-10V Classic, two 0-10V inputs allow to control the two output currents of each within the limit of the max. power.
Rev. 0.2 2017. 10. 26 1 Programmable Multi-Channel Driver PMD-35A-S SLP-DUA4350AUS Key Features Programmable, adjustable constant output current which can be adjusted to match LED module requirements and
More informationMax Input Current at 120V (A) Max. Power (W) Inrush Current (A pk - µs) -20~55 C
Electrical Specifications Max. Output Power (W) Output Voltage (V) Output Current (A) Operating Temp. Range ( F/ C) Max Input Current at 12V (A) Max. Input Power (W) Inrush Current (A pk - µs) Max. THD
More informationElectrical input data. Electrical output data. Electrical data controls input. Logistical data. Specification item Value Unit Condition
Electrical input data Rated input voltage range 220... 240 Vac Performance Input voltage range 198... 264 Vac Operational Rated input frequency range 50... 60 Hz Performance Input frequency range 45...
More information}CLASS 2. LED Driver. Xitanium SR 95W V 2.75A SR XI095C275V054VPF1. Specifications. Wiring Diagram. Enclosure. Input and output use lead-wires.
LED Driver Xitanium SR 95W 120-277V 2.75A SR XI095C275V054VPF1 The Philips Advance Xitanium SR LED driver can help reduce complexity and cost of light fixtures used in industrial high-bay and outdoor wireless
More informationElectrical Specifications
Electrical Specifications 913701213402 Max. Output Power (W) Output Voltage (V) 39 20-56 Output Current (A) 200-700mA Tcase Max Max Input Current at 120V (A) Max. Input Power (W) Inrush Current (A pk -
More informationXitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver XITANIUM 36W A 48V 0-10V XI036C100V048DNM1. Dimensions.
Philips Advance Xitanium LED Driver Features UL Class 2 output with Adjustable Output Current (AOC) SmartMate style housing with 90 C Tcase max Compatible with Philips Fortimo Down Light Modules Benefits
More informationXI040C110V054BPT1 Brand Name XITANIUM XITANIUM 40W A 54V 0-10V w/t
Product Overview Input Voltage (Vac) Output Power (W) Output Voltage Range (V) Output (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input (Arms) Max. Input Power (W) Inrush (Apk/50%-µs) THD
More informationLED Driver DC-String
Driver LCU 48V 150W DC-STR FO SR Fixed output Product description Independent fixed output constant voltage LED Driver Compatible with other components Max. output power 150 W Up to 93 % efficiency Nominal
More informationXitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver XITANIUM 75W 1.05A 0-10V HCN-F XH075C105V070CNF1. Dimensions.
Philips Advance Xitanium LED Driver Features High drive current Isolated 0-10V dimming New housing with increased thermal capability Benefits Enables higher lumen per dollar fixture designs Helps to maximize
More informationSAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy
Model: LP96W 480V UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: 96W Max. Input Voltage: 77 to 480VAC, 50/60Hz Voltages: 4VDC Currents: 1000mA - 4000mA Environmental
More informationwww.greenelectricalsupply.com UNV Dimmable LED Driver w/ Tuning 1050mA Constant Current Output Class 2, 55W Output 0 10V Dimming to 1% Performance Input Voltage 120 ~ 277 Vac Input Current Max 0.54 /120V
More informationOutput Voltage Range. Power ma ma 700 ma 176~305 Vac 155~343 Vdc 240 W 94.0% 0.98 EBD-240S105DV
EBD240SxxxDV Features Ultra High Efficiency (Up to 94%) Full Power at Wide Output Current Range (Constant Power) Compact Package Design 05V/010V/PWM/Timer Dimmable Input surge protection: 6 kv lineline,
More informationOutput Voltage Range. Power ma ma 700 ma 176~305 Vac 97~214 Vdc 150 W 93.0% 0.98 EBD-150S105DVA
EBD150SxxxDVA Features Ultra High Efficiency (Up to 93.0%) Full Power at Wide Output Current Range (Constant Power) Compact Package Design 05V/010V/PWM/Timer Dimmable Input surge protection: 6 kv lineline,
More informationLED Driver DC-String
Driver LCU 48V 15W DC-STR FO lp Fixed output Product description Fixed output constant voltage built-in LED Driver Compatible with other components Max. output power 15 W Up to 93 % efficiency Nominal
More informationSAMSUNG ELECTRO-MECHANICS CO., LTD
Model Name : Features : ㅡ Suitable for LED lighting application ㅡ UL8750, UL1310 Class 2 ㅡ For use in Dry and Damp Location ㅡ Full-protection provided: OCP/OLP/OTP/SCP ㅡ Non potting product Electrical
More informationFeature Ultra High Efficiency (Up to 94%)
EUG240SxxxDT Feature Ultra High Efficiency (Up to 94%) Full Power at Wide Output Current Range (Constant Power) 05V/010V/PWM/Timer Dimmable Input Surge Protection: 6 kv lineline, 10 kv lineearth AllAround
More informationLED Power Driver drivers
LED Power Drivers LED Power Driver drivers LED Power Driver 80W 24V 120-240V Product description Philips Constant Voltage LED Power drivers are designed to operate 24VDC LED solutions used in applications
More informationProduct data sheet: OTi DALI 25/ /700 LT2 G2
www.osram.com Product data sheet: OTi DALI 25/220-240/700 LT2 G2 SELV Constant current LED driver Wide operating area up to 700mA - dimmable The reliable choice for the energy saving lighting: DALI dimmable,
More informationElectrical Specifications
Electrical Specifications 913701213402 Max. Output Power (W) Output Voltage (V) Output Current (A) Tcase Max Max Input Current at 120V (A) Max. Input Power (W) Inrush Current (A pk - 50% µ s) Max. THD
More informationSAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy
Model: LD40W480 UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: 40W Max. Voltages: 1VDC or 4VDC Currents: 418mA - 3330mA Environmental 1. Operating temperature: Tc
More informationSAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy
17 Watt s Model: LD UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: Max. Voltages: 1VDC or 4VDC Currents: 175mA - 1400mA Environmental 1. Operating temperature: Tc
More informationLL1x50-E-DA. 1x50 W Dimmable DALI LED driver. 50 W V 0 / 50 Hz 60 Hz. Functional description. Mains characteristics
1x50 W Dimmable DALI LED driver Hybrid dimming technique for high quality light 50 W 220 240 V 0 / 50 Hz 60 Hz Suitable for use in emergency lighting applications DALI control input, 1 % - 100 % dimming
More informationLED DRIVER SPECIFICATIONS
MOONS' RELEASE DEPARTMENT: PAGE: R&D 1 of 8 TITLE: MU050S150BQI201 SPECIFICATIONS LED DRIVER SPECIFICATIONS REVISION: A0 oc No.: MSSD-6420 A0 Part Description: Input:90AC~305VAC, Customer s Part Number:
More informationElectrical Specifications
Electrical Specifications 913701213402 Max. Output Power (W) Output Voltage (V) 39 25-56 Output Current (A) 200-700mA Operating Temp. Range ( F/ C) Max Input Current at 120V (A) Max. Input Power (W) Inrush
More informationXitanium Outdoor LED Drivers Single Current
Xitanium LED driver Datasheet Xitanium Outdoor LED Drivers Single Current LED-based light sources are an excellent solution for outdoor environments. They are long-lasting and require low maintenance.
More informationLED Driver. Xitanium SR 150W V 0.7A SR XI150C070V235VSF1. Specifications. Wiring Diagram. Enclosure. Input and output use lead-wires.
LED Driver Xitanium SR 150W 120-277V 0.7A SR XI150C070V235VSF1 The Philips Advance Xitanium SR LED driver can help reduce complexity and cost of light fixtures used in wireless connected lighting systems.
More informationMax. Output Power. Typical Efficiency (2) 143~286Vdc 200 W 93.5% EUD-200S070GV. 95~190Vdc 200 W 93.5%
EUD200SxxxGV Features Ultra High Efficiency (Up to 93.5%) Programmable ConstantCurrent Output DMX512 Dimmable Standby Power 1 W Input surge protection: 4kV lineline, 6kV lineearth AllAround Protection:
More informationMax. Output Power(2) Typical Efficiency (3) 0 ~ 18.4 A 220 W 91.5% 0.96 EBV-250S012SV 0 ~ 10.5 A 250 W 93.0% 0.96 EBV-250S024SV
Features High Efficiency (up to 93.5%) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: OCP, OVP, SCP, OTP Waterproof (IP67) SELV Output Independent Design
More informationPreliminary. LED Driver. Xitanium SR 75W V 0.7A SR XI075C070V118VSY1. Specifications. Enclosure. Wiring Diagram 1.50"
LED Driver Xitanium SR 75W 120-277V 0.7A SR XI075C070V118VSY1 Specifications Input Voltage (Vrms) Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max. Load and 70 C Case The Philips
More informationMPO-120S Series. Single Output, 180W Compact, Open Frame AC/DC Power Supplies. Key Features:
MPO-120S Series Single, 180W Compact, Open Frame AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved High Efficiency Five Single Models Meets EN
More informationElectrical input data. Electrical output data. Electrical data controls input. Logistical data. Specification item Value Unit Condition
September 2015 Electrical input data Rated input voltage range 220... 240 Vac Performance Input voltage range (170) 198... 264 Vac Operational (AmpDim enabled) Rated input voltage range 186... 250 Vdc
More informationPreliminary. LED Driver. Xitanium SR DRIVER 150W V 1.05A SR XI150C105V157VSF1. Specifications. Enclosure. Wiring Diagram
LED Driver Xitanium SR 150W 120-277V 1.05A SR XI150C105V157VSF1 Specifications Input Voltage (Vrms) Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load and 70 C Case The Philips
More informationOutput Voltage Range. Max. Output Power ma ma 700 ma 176~305 Vac 43~107 Vdc 75 W 90.5% 0.98 EBD-075S105DV
EBD075SxxxDV Features High Efficiency (Up to 90.5%) Full Power at Wide Output Current Range (Constant Power) Compact Package Design 05V/010V/PWM/Timer Dimmable Input surge protection: 6 kv lineline, 10
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationH HOLUX Kft. H-1135 Budapest, Béke u Tel: (06 1) Fax: (06 1)
EBS040SxxxBTE Rev.C 40W Class I/II Programmable IP20 Driver with DALI Features High Efficiency (Up to 89.5%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for
More informationElectrical input data. Electrical output data. Electrical data controls input. Logistical data. Specification item Value Unit Condition
Electrical input data Rated input voltage range 220... 240 Vac Performance Input voltage range 198... 264 Vac Operational Rated input frequency range 50... 60 Hz Performance Input frequency range 45...
More informationOLU550P102U1U PSOV550102*
Model Name Model Code PSOV550102U PSOV550102W PSOV550102V Features : ㅡ Flickerless ㅡ Full-protection provided: OCP/OVP/OTP/SCP/OLP ㅡ Low Power Dissipation (Stand-by mode :
More informationLED driver 36W 0.3-1A 48V 230V
Electrical input data minal input voltage 220...240 Vac minal input frequency 50...60 Hz minal input current 0.2 A minal input power 42 W Power factor 0.9 Total harmonic distortion 30 Efficiency 85, maximum
More informationOPTOTRONIC LED Power Supply OTi60/UNV/1600C/DALI/P6 - Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply OTi/UNV/10C/DALI/P6 - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz) 50 Hz (+/-
More informationIndoor 15 W Dimmable SI-EPF006640WW
Product Data Sheet Rev. 4.2 2017.02.06 1# LED Driver Indoor 15 W Dimmable SI-EPF006640WW Constant Current LED Driver Wide Operating Range up to 0.5 A Dimmable Features & Benefits Output Current Range:
More informationOutput Voltage in Constant Voltage Mode. Model Number
Supplies LDB75 Supply Constant Voltage /Current LDB Series FEATURES Universal Input: 90-305VAC Constant Voltage/Current High Efficiency 91% Class II IP67 rated Class 2 device (UL1310) Power Factor: Typical
More informationLED Driver Compact dimming
Driver LCA 60W 300 1050mA 1 10 V C ADV OTD ADVANCED Outdoor series Product description Dimmable built-in LED Driver Constant current LED Driver Output current adjustable between 300 1,050 ma Max. output
More informationMax. Input Power (W) Input Current. Inrush Current
Output Power (W) Output Voltage (V) Output Current (A) Efficiency Tcase Max Input Current Max. Input Power (W) Inrush Current (Apk/µs) Max. THD (%) Min. Power Factor Surge Protection (KV) Weight (Lbs)
More informationOutput Voltage Range. Max. Output Power
EUD150SxxxBV Features High Efficiency (Up to 92%) Full Power at 50100% Max Current (Constant Power) DALI Dimmable and DimtoOff Standby Power 1 W Input Surge Protection: 4kV lineline, 6kV lineearth AllAround
More informationLED Driver Compact dimming
Driver LCA 12 W 3 15 ma 1 1 V C ADV OTD ADVANCED Outdoor series Product description Dimmable built-in LED Driver Constant current LED Driver Output current 3 1,5 ma Max. output power 12 W Nominal life-time
More informationLED Driver. Xitanium 150W V 1.05A 0-10V XI150C105V140CNF1. Specifications. Enclosure. Wiring Diagram. Input and output use lead-wires.
LED Driver Xitanium 150W 120-277V 1.05A 0-10V XI150C105V140CNF1 Specifications Input Voltage (Vrms) Power (W) Voltage (V) (A) Efficiency@ Max Load and 70 C Case Max. Case Temp. ( C) Input (Arms) Max. Input
More informationI/P-O/P:3000VAC, I/P-FG:1750VAC, I/P-(0-10V) Dimming: 1750VAC, O/P-(0-10V) Dimming: 1750VAC,O/P-FG:500VAC Insulation Resistance
BLE Compatible Constant Current Programmable Driver Input Voltage: 120V-277V~ - 50/60Hz Constant Current Programmable 250-1500mA Class 2 LED Driver Output Voltage Range of 10-57V General Specifications
More informationEngineered for Best Fixture Performance. Product features. Certificates and standards. 5 year warranty. Classifications. Engineered for Performance
L05021(E) LED Driver mains dimmable 12W, 3-32Vdc, 350/700mA L1E1230070S-12E(Z) L05021-40250 LED Driver mains dimmable 10W, 20-40Vdc, 200/250mA L1E1230025S-10E L05021-40300 LED Driver mains dimmable 12W,
More information