INSTALATION MANUAL 2

Transcription

1 S M A R T F O R Y O U R H O M E 1 I N S T A L L A T I O N M A N U A L

2 INSTALATION MANUAL 2

3 Lighting On/Off On/off lights (and other on/off devices) have to be connected to the ENTIAliving system as shown in the block diagram below. Note that on/off lights can be connected to either, Power Expander EL-E1801 or Power Expander EL-E1601 (the former being depicted in the block diagram below). One EL-E801 Power Expander supports up to 8 power outputs, while EL-E1601 Power Expander supports up to 16 power outputs. Dimmed lights must be connected to the Power Dimmer EL-D01 instead of Power Expander modules as shown later on in this document. Note that on the block diagram below, the elements and wiring for lighting connection is highlighted. Sens Controller EL-S01 2 x 2x0.75 Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 SFTP Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E x1.5x Lights 1-5 3

4 Lighting On/Off 4

5 Lighting Dimm Dimmable lights have to be connected to the ENTIAliving system as shown in the block diagram below. Note that dimmable lights can be connected to Power Dimmer EL-D01. One EL-D01 Power Dimmer supports up to 5 dimmer outputs. Note that on the block diagram below, the elements and wiring for lighting connection is highlighted. Sens Controller EL-S01 2 x 2x0.75 Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 SFTP Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E1601 2x1.5 3 x 1.5 Lights 1-5 5

6 Lighting Dimm 6

7 Lighting DALI DALI lighting devices have to be connected to the ENTIAliving system as shown in the block diagram below. Note that one ENTIAliving DALI Converter EL-CD01 can support up to 64 DALI lighting devices and 16 groups of DALI lighting devices. On the block diagram below, the elements and wiring for DALI lighting connection is highlighted. Sens Controller EL-S01 2x ebus x 2 x 0,8 (CAN) J(Y)-STY J(Y)-ST-Y DALI BUS Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E1601 Dimm Light 5 DALI Light 4 Dimm Light 3 Dimm Light 2 DALI Light 1 7

8 Lighting DALI 8

9 Heating&Cooling Valves On/off heating valves (and other on/off devices) need to be connected to the ENTIAliving system as shown in the block diagram below. Note that described devices can be connected to either Power Expander EL-E801 or Power Expander EL-E1601 (the latter being depicted in the block diagram below). One EL-E801 Power Expander supports up to 8 power outputs, whereas EL-E1601 Power Expander supports up to 16 power outputs. Note that on the block diagram below, the elements and wiring for heating valve connection is highlighted. Sens Controller EL-S01 2 x 0.75 Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 SFTP Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E x 1,5 Bathroom / Bedroom 1-2 9

10 Heating&Cooling Valves 10

11 Heating&Cooling Fan-Coils Fan coils need to be connected to the ENTIAliving system as shown in the block diagram below the dashed line is connected in case of a 2 tube system (same tubes for hot and cold water), while it is not connected in a 4 tube system. Note that described HVAC devices can be connected to either Power Expander EL-E1801 or Power Expander EL-E1601 (the latter being depicted in the block diagram below). One EL-E801 Power Expander supports up to 8 power outputs, whereas EL-E1601 Power Expander supports up to 16 power outputs. Note that on the block diagram below, the elements and wiring for fancoil connection is highlighted. Sens Controller EL-S01 2x0.75 Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 SFTP Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E (5) x 1,5 11

12 Heating&Cooling Fan-Coils 12

13 Shading Shades, Blinds,... Shading devices, such as shades, blinds, tendas and other have to be connected to the ENTIAliving system as shown in the block diagram below. As opposed to lighting installation (previous chapter), shading MUST NOT be connected to the ENTIAliving Power Expander EL-E801 and must instead be connected to the Power Expander EL-E1601. Note that on the block diagram below, the elements and wiring for shading connection is highlighted. Sens Controller EL-S01 2x0.75 Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 STP Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E x 1,5 Shade

14 Shading Shades, Blinds,... 14

15 Air Conditioning IR Any IR remote controlled A/C device can be connected to the ENTIAliving system as shown in the block diagram below. Note that one ENTIAliving IR Controller EL-IR01 can support 1 air conditioning device. On the block diagram below, the elements and wiring for air conditioning connection is highlighted. A/C 1 IR Controller EL-IR01 2x ebus x 2 x (CAN) 0,8 J(Y)-STY J(Y)-ST-Y 2 x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E

16 Air Conditioning IR 16

17 Air Conditioning MODBUS MODBUS compatible A/C devices have to be connected to the ENTIAliving system as shown in the block diagram below. Note that one ENTIAliving MODBUS Converter EL-CA01 can support up to 256 air conditioning devices. On the block diagram below, the elements and wiring for air conditioning connection is highlighted. Sens Controller EL-S01 2x0.75 ebus 2 x 2 x (CAN) 0,8 J(Y)-STY J(Y)-ST-Y 2 x 2 x 0,8 J(Y)-STY Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E1601 A/C 1 A/C 2 17

18 Air Conditioning MODBUS 18

19 CAN Units ENTIAliving CAN (ebus) controllers, such as Main Controller EL-M01, Main Controller EL-M01a,, DALI Converter EL-CD01, MODBUS Converter EL-CA01 and Sens Controller EL-S01 have to be connected as shown in the block diagram below. Note that on the block diagram below, the CAN elements and wiring is highlighted. The order in which CAN devices are interconnected is of no consequence (e.g. we could start with a Room Controller instead of the Main Controller). Multiple Main Controllers can be connected in one ebus circuit, if required (e.g. in case of more than 64 power outputs). 2 x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY Sens Controller EL-S01 2x ebus x 2 x (CAN) 0,8 J(Y)-STY J(Y)-ST-Y 2 x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E

20 CAN Units 20

21 Buttons & Switches Power Expander connect Below is the block diagram for connecting inputs (buttons, switches, digital sensors) to the ENTIAliving system via the Power Expander (EL-E801 and EL-E1601) modules. Up to 8 digital inputs can be connected to the EL-E801 module and up to 16 digital inputs to the EL-E1601 module. Sens Controller EL-S01 2x0.75 Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 SFTP Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY 21

22 Buttons & Switches Power Expander connect 22

23 Buttons & Switches BUS connect Below is the block diagram for connecting inputs (buttons, swithcehs, digital sensors) to the ENTIAliving system via the and/or Sens Controller ( and EL-S01) modules. Up to 10 digital inputs can be connected to either or EL-S01 module. 2 x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY Sens Controller EL-S01 2x x 2 x 0,8 J(Y)-STY 2 x 2 x 0,8 J(Y)-STY 2 ebus x 2 x (CAN) 0,8 J(Y)-STY J(Y)-ST-Y Power Supply EL-PS01 Main Controller EL-M01 DALI Converter EL-CD01 MODBUS Converter EL-CA01 SFTP Power Dimmer EL-D01 Power Expander EL-E801 Power Expander EL-E

24 Buttons & Switches BUS connect 24

25 ABOUT THE COMPANY Our mission is to make ordinary people s lives easier, more effective and less costly. We are beleivers, enthusiasts, engineers, explorers, achievers... We are Entia. The company Entia was founded in 2009 and the product ENTIAliving was born a year later. A cloud based smart home for new residential buildings that increases the energy efficincy, security and comfort of a home while enabling world wide remote control with smartphones, tablets or personal computers. Assembled with the highest quality components and manufactured in European Union, ENTIAliving covers all the functionality of any smart home system available on the market, adding cloud related advantages, such as world wide monitoring and remote control, remote management and service etc. ENTIAliving is moving a luxury product into the mass market thus making smart home widely affordable. CE standards The ENTIAliving system has passed all the necessary tests to achieve the following standards of quality assurance: EN EN EN EN EN EN EN EN EN EN (EN 50090: A1: A2:2007) 25

26 26 Entia d.o.o., Vodovodna 99a, 1000 Ljubljana, Slovenia, EU P E info@entia.eu W