EZ-SCREEN. Some of the Available Finishes. Clear Anodized Aluminum. Interface multiple devices with the SC22-3 Safety Controller.

Transcription

1 EZ-SCREE Type 4 Point-of-Operation Available in 4 mm resolution for finger, hand and ankle detection or 0 mm resolution for hand and ankle detection Operates in ranges from 0. to 6 m (4 mm models) and 0. to 8 m (0 mm models) Offers fixed or -beam reduced resolution (floating blanking) to ignore tooling or constant inflow of materials Displays operating status, configuration error codes, and blocked beams User-configurable trip or latch outputs, Scan Code or and Aux output Exceeds OSHA/ASI Control Reliability requirements, certified to cuus IPF, and CE certified to Type 4, Cat 4 Pe, and SI Provides external device monitoring (EDM) Resists impact, twisting and abusive environments with a durable aluminum housing and metal endcaps Available with standard yellow, clear anodized aluminum housing or nickel-plated ESD-safe housing for protection against electrostatic discharges (other color options available) Offers optional cascading to create up to a four sensor system that issues a single stop command Offers optional lens shields and enclosures for added durability Photoelectrics Fiber Optic Special Purpose Measurement & Inspection Vision Wireless ighting & Indicators Safety ight Screens Safety aser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control ACCESSORIES mm Some of the Available Finishes EZ-SCREE TYPE 4 4 or 0 mm TYPE 4 ow Profile 4 or 5 mm TYPE 0 mm GridS & Points PICO-GUARD online AUTOCAD, STEP, IGES & PDF 6.0 mm EZ-SCREE Systems Yellow Painted Aluminum Clear Anodized Aluminum ickel-plated ESD Interface multiple devices with the SC- Safety Controller. See 56 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

2 EZ-SCREE (TYPE 4 & TYPE ) PICO-GUARD FIBER OPTIC (TYPE 4) MACHIE SAFETY ACCESSORIES 480 EZ-SCREE Systems, 4 mm Resolution 0. to 6 m Range, 4V dc Defined Area 50 mm 00 mm 450 mm 600 mm 750 mm 900 mm 050 mm 00 mm 50 mm 500 mm 650 mm 800 mm M/Euro Connection Housing ength () Response Time # of Beams Output Emitter Receiver Pair SSE4-50Q8 SSR4-50Q8 SSP4-50Q88 6 mm ms 0 8-pin Pigtail QD SSE4-50P8 SSR4-50P8 SSP4-50P88 SSE4-00Q8 SSR4-00Q8 SSP4-00Q88 7 mm 5 ms 40 8-pin Pigtail QD SSE4-00P8 SSR4-00P8 SSP4-00P88 SSE4-450Q8 SSR4-450Q8 SSP4-450Q88 5 mm 9 ms 60 8-pin Pigtail QD SSE4-450P8 SSR4-450P8 SSP4-450P88 SSE4-600Q8 SSR4-600Q8 SSP4-600Q88 67 mm ms 80 8-pin Pigtail QD SSE4-600P8 SSR4-600P8 SSP4-600P88 SSE4-750Q8 SSR4-750Q8 SSP4-750Q88 8 mm 7 ms 00 8-pin Pigtail QD SSE4-750P8 SSR4-750P8 SSP4-750P88 SSE4-900Q8 SSR4-900Q8 SSP4-900Q88 97 mm ms 0 PP 8-pin Pigtail QD OSSD SSE4-900P8 SSR4-900P8 SSP4-900P88 (Trip/atch SSE4-050Q8 SSR4-050Q8 SSP4-050Q88 0 mm 6 ms 40 selectable) 8-pin Pigtail QD SSE4-050P8 SSR4-050P8 SSP4-050P88 SSE4-00Q8 SSR4-00Q8 SSP4-00Q88 70 mm 40 ms 60 8-pin Pigtail QD SSE4-00P8 SSR4-00P8 SSP4-00P88 SSE4-50Q8 SSR4-50Q8 SSP4-50Q88 40 mm 4 ms 80 8-pin Pigtail QD SSE4-50P8 SSR4-50P8 SSP4-50P88 SSE4-500Q8 SSR4-500Q8 SSP4-500Q mm 48 ms 00 8-pin Pigtail QD SSE4-500P8 SSR4-500P8 SSP4-500P88 SSE4-650Q8 SSR4-650Q8 SSP4-650Q88 79 mm 5 ms 0 8-pin Pigtail QD SSE4-650P8 SSR4-650P8 SSP4-650P88 SSE4-800Q8 SSR4-800Q8 SSP4-800Q mm 56 ms 40 8-pin Pigtail QD SSE4-800P8 SSR4-800P8 SSP4-800P88 EZ-SCREE Systems, 0 mm Resolution 0. to 8 m Range, 4V dc Defined Area 50 mm 00 mm 450 mm 600 mm 750 mm 900 mm M/Euro Connection Housing ength () Response Time # of Beams Output Emitter Receiver Pair SSE0-50Q8 SSR0-50Q8 SSP0-50Q88 6 mm 9 ms 0 8-pin Pigtail QD SSE0-50P8 SSR0-50P8 SSP0-50P88 SSE0-00Q8 SSR0-00Q8 SSP0-00Q88 7 mm ms 0 8-pin Pigtail QD SSE0-00P8 SSR0-00P8 SSP0-00P88 SSE0-450Q8 SSR0-450Q8 SSP0-450Q88 5 mm ms 0 PP 8-pin Pigtail QD OSSD SSE0-450P8 SSR0-450P8 SSP0-450P88 (Trip/atch SSE0-600Q8 SSR0-600Q8 SSP0-600Q88 67 mm 5 ms 40 selectable) 8-pin Pigtail QD SSE0-600P8 SSR0-600P8 SSP0-600P88 SSE0-750Q8 SSR0-750Q8 SSP0-750Q88 8 mm 7 ms 50 8-pin Pigtail QD SSE0-750P8 SSR0-750P8 SSP0-750P88 SSE0-900Q8 SSR0-900Q8 SSP0-900Q88 97 mm 9 ms 60 8-pin Pigtail QD SSE0-900P8 SSR0-900P8 SSP0-900P88 QD models: A model with a QD requires a mating cordset (see 480). For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SSE4-50Q5) and Q88 with Q85 on pair model numbers (example, SSP4-50Q85). For a 00 mm M/Euro pigtail QD, replace Q with P in model numbers (example, SSP4-50P88). For a 5-pin 00 mm M/Euro pigtail QD with o EDM or TEST functions, replace Q8 with P5T on emitter or receiver (example, SSE4-50P5T) and Q88 with P55T on pair model numbers (example, SSP4-50P55T). For a 4-pin 00 mm M/Euro pigtail QD with no EDM or TEST functions (GD/PE via mounting), replace Q8 with P4T or Q88 with P44T (example, SSP4-50P44T). ESD-safe models: Add to the model number, prior to the QD option designation (example, SSE4-50Q8). ESD-safe models are not available with the pigtail QD option. Optional housing finishes: Prior to the QD designation in the model number, add A for a clear (brushed) anodized aluminum finish, black endcaps (example, SSE4-50AQ8); S for a nickel-plated (silver) finish, black endcaps (example, SSE4-50SQ8), B for a black painted finish, black endcaps (example, SSE4-50BQ8), W for a white painted finish, black endcaps (example, SSE4-50WQ8) or SO for a safety orange painted finish, black endcaps (example, SSE4-50SOQ8). A pair includes an emitter and receiver (example, SSP4-50Q88). Emitters (example, SSE4-50Q8) and receivers (example, SSR4-50Q8) are also sold separately. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

3 EZ-SCREE Systems, 0 mm Resolution 0. to 8 m Range, 4V dc Defined Area 050 mm 00 mm 50 mm 500 mm 650 mm 800 mm 950 mm 00 mm 50 mm 400 mm M/Euro Connection Housing ength () Response Time # of Beams Output (cont d) Emitter Receiver Pair SSE0-050Q8 SSR0-050Q8 SSP0-050Q88 0 mm ms 70 8-pin Pigtail QD SSE0-050P8 SSR0-050P8 SSP0-050P88 SSE0-00Q8 SSR0-00Q8 SSP0-00Q88 70 mm ms 80 8-pin Pigtail QD SSE0-00P8 SSR0-00P8 SSP0-00P88 SSE0-50Q8 SSR0-50Q8 SSP0-50Q88 40 mm 5 ms 90 8-pin Pigtail QD SSE0-50P8 SSR0-50P8 SSP0-50P88 SSE0-500Q8 SSR0-500Q8 SSP0-500Q mm 7 ms 00 8-pin Pigtail QD SSE0-500P8 SSR0-500P8 SSP0-500P88 SSE0-650Q8 SSR0-650Q8 SSP0-650Q88 79 mm 0 ms 0 PP 8-pin Pigtail QD OSSD SSE0-650P8 SSR0-650P8 SSP0-650P88 (Trip/atch SSE0-800Q8 SSR0-800Q8 SSP0-800Q mm ms 0 selectable) 8-pin Pigtail QD SSE0-800P8 SSR0-800P8 SSP0-800P88 SSE0-950Q8 SSR0-950Q8 SSP0-950Q88 08 mm 4 ms 0 8-pin Pigtail QD SSE0-950P8 SSR0-950P8 SSP0-950P88 SSE0-00Q8 SSR0-00Q8 SSP0-00Q88 68 mm 6 ms 40 8-pin Pigtail QD SSE0-00P8 SSR0-00P8 SSP0-00P88 SSE0-50Q8 SSR0-50Q8 SSP0-50Q88 8 mm 8 ms 50 8-pin Pigtail QD SSE0-50P8 SSR0-50P8 SSP0-50P88 SSE0-400Q8 SSR0-400Q8 SSP0-400Q mm 40 ms 60 8-pin Pigtail QD SSE0-400P8 SSR0-400P8 SSP0-400P88 EZ-SCREE Cascade Systems, 4 mm Resolution 0. to 6 m Range, 4V dc Defined Area 00 mm 450 mm 600 mm 750 mm 900 mm 050 mm 00 mm 50 mm M/Euro Connection Housing ength () Response Time # of Beams Output Emitter Receiver Pair SSCE4-00Q8 SSCR4-00Q8 SSCP4-00Q88 7 mm 5 ms 40 8-pin Pigtail QD SSCE4-00P8 SSCR4-00P8 SSCP4-00P88 SSCE4-450Q8 SSCR4-450Q8 SSCP4-450Q88 5 mm 9 ms 60 8-pin Pigtail QD SSCE4-450P8 SSCR4-450P8 SSCP4-450P88 SSCE4-600Q8 SSCR4-600Q8 SSCP4-600Q88 67 mm ms 80 8-pin Pigtail QD SSCE4-600P8 SSCR4-600P8 SSCP4-600P88 SSCE4-750Q8 SSCR4-750Q8 SSCP4-750Q88 8 mm 7 ms 00 PP 8-pin Pigtail QD OSSD SSCE4-750P8 SSCR4-750P8 SSCP4-750P88 (Trip/atch SSCE4-900Q8 SSCR4-900Q8 SSCP4-900Q88 97 mm ms 0 selectable) 8-pin Pigtail QD SSCE4-900P8 SSCR4-900P8 SSCP4-900P88 SSCE4-050Q8 SSCR4-050Q8 SSCP4-050Q88 0 mm 6 ms 40 8-pin Pigtail QD SSCE4-050P8 SSCR4-050P8 SSCP4-050P88 SSCE4-00Q8 SSCR4-00Q8 SSCP4-00Q88 70 mm 40 ms 60 8-pin Pigtail QD SSCE4-00P8 SSCR4-00P8 SSCP4-00P88 SSCE4-50Q8 SSCR4-50Q8 SSCP4-50Q88 40 mm 4 ms 80 8-pin Pigtail QD SSCE4-50P8 SSCR4-50P8 SSCP4-50P88 QD models: A model with a QD requires a mating cordset (see 480). Photoelectrics Fiber Optic Special Purpose Measurement & Inspection Vision Wireless ighting & Indicators Safety ight Screens Safety aser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control ACCESSORIES 480 EZ-SCREE TYPE 4 4 or 0 mm TYPE 4 ow Profile 4 or 5 mm TYPE 0 mm GridS & Points PICO-GUARD For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SSE0-050Q5) and Q88 with Q85 on pair model numbers (example, SSP0-050Q85). For a 00 mm Euro pigtail QD, replace Q with P in model numbers (example, SSP0-050P88). For a 5-pin 00 mm Euro pigtail QD with o EDM or TEST, replace Q8 with P5T on emitter or receiver (example, SSE0-050P5T) and Q88 with P55T on pair models (example, SSP0-050P55T). For a 4-pin 00 mm M/Euro pigtail QD with no EDM or TEST functions (GD/PE via mounting), replace Q8 with P4T or Q88 with P44T (example, SSP0-050P44T). ESD-safe models: Add to the model number, prior to the QD option designation (example, SSE0-050Q8). ESD-safe models are not available with the pigtail QD option. Optional housing finishes: Prior to the QD designation in the model number, add A for a clear (brushed) anodized aluminum finish, black endcaps (example, SSE0-050AQ8); S for a nickel-plated (silver) finish, black endcaps (example, SSE0-050SQ8), B for a black painted finish, black endcaps (example, SSE0-050BQ8), W for a white painted finish, black endcaps (example, SSE0-050WQ8) or SO for a safety orange painted finish, black endcaps (example, SSE0-050SOQ8). Cascading system response time: To the response time of the slowest pair, add ms for each additional pair. Example: slowest pair s response time is 5 ms, and the system has three additional pairs (four pairs total), so the system maximum response time is 5 ms + 6 ms ( pairs x ms) = ms. A pair includes an emitter and receiver (example, SSP0-050Q88). Emitters (example, SSE0-050Q8) and receivers (example, SSR0-050Q8) are also sold separately. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

4 EZ-SCREE (TYPE 4 & TYPE ) PICO-GUARD FIBER OPTIC (TYPE 4) MACHIE SAFETY ACCESSORIES 480 EZ-SCREE Cascade Systems, 4 mm Resolution 0. to 6 m Range, 4V dc Defined Area 500 mm 650 mm 800 mm EZ-SCREE Cascade Systems, 0 mm Resolution 0. to 8 m Range, 4V dc Defined Area 00 mm 450 mm 600 mm 750 mm 900 mm 050 mm 00 mm 50 mm 500 mm 650 mm 800 mm 950 mm 00 mm 50 mm 400 mm M/Euro Connection M/Euro Connection Housing ength () Housing ength () Response Time Response Time # of Beams # of Beams Output Output Emitter Receiver Pair SSCE4-500Q8 SSCR4-500Q8 SSCP4-500Q mm 48 ms 00 8-pin Pigtail QD SSCE4-500P8 SSCR4-500P8 SSCP4-500P88 PP OSSD SSCE4-650Q8 SSCR4-650Q8 SSCP4-650Q88 79 mm 5 ms 0 8-pin Pigtail QD (Trip/atch SSCE4-650P8 SSCR4-650Q8 SSCP4-650P88 selectable) SSCE4-800Q8 SSCR4-800Q8 SSCP4-800Q mm 56 ms 40 8-pin Pigtail QD SSCE4-800P8 SSCR4-800Q8 SSCP4-800P88 (cont d) Emitter Receiver Pair SSCE0-00Q8 SSCR0-00Q8 SSCP0-00Q88 7 mm ms 0 8-pin Pigtail QD SSCE0-00P8 SSCR0-00P8 SSCP0-00P88 SSCE0-450Q8 SSCR0-450Q8 SSCP0-450Q88 5 mm ms 0 8-pin Pigtail QD SSCE0-450P8 SSCR0-450P8 SSCP0-450P88 SSCE0-600Q8 SSCR0-600Q8 SSCP0-600Q88 67 mm 5 ms 40 8-pin Pigtail QD SSCE0-600P8 SSCR0-600P8 SSCP0-600P88 SSCE0-750Q8 SSCR0-750Q8 SSCP0-750Q88 8 mm 7 ms 50 8-pin Pigtail QD SSCE0-750P8 SSCR0-750P8 SSCP0-750P88 SSCE0-900Q8 SSCR0-900Q8 SSCP0-900Q88 97 mm 9 ms 60 8-pin Pigtail QD SSCE0-900P8 SSCR0-900P8 SSCP0-900P88 SSCE0-050Q8 SSCR0-050Q8 SSCP0-050Q88 0 mm ms 70 8-pin Pigtail QD SSCE0-050P8 SSCR0-050P8 SSCP0-050P88 SSCE0-00Q8 SSCR0-00Q8 SSCP0-00Q88 70 mm ms 80 8-pin Pigtail QD SSCE0-00P8 SSCR0-00P8 SSCP0-00P88 PP OSSD SSCE0-50Q8 SSCR0-50Q8 SSCP0-50Q88 40 mm 5 ms 90 8-pin Pigtail QD (Trip/atch SSCE0-50P8 SSCR0-50P8 SSCP0-50P88 selectable) SSCE0-500Q8 SSCR0-500Q8 SSCP0-500Q mm 7 ms 00 8-pin Pigtail QD SSCE0-500P8 SSCR0-500P8 SSCP0-500P88 SSCE0-650Q8 SSCR0-650Q8 SSCP0-650Q88 79 mm 0 ms 0 8-pin Pigtail QD SSCE0-650P8 SSCR0-650P8 SSCP0-650P88 SSCE0-800Q8 SSCR0-800Q8 SSCP0-800Q mm ms 0 8-pin Pigtail QD SSCE0-800P8 SSCR0-800P8 SSCP0-800P88 SSCE0-950Q8 SSCR0-950Q8 SSCP0-950Q88 08 mm 4 ms 0 8-pin Pigtail QD SSCE0-950P8 SSCR0-950P8 SSCP0-950P88 SSCE0-00Q8 SSCR0-00Q8 SSCP0-00Q88 68 mm 6 ms 40 8-pin Pigtail QD SSCE0-00P8 SSCR0-00P8 SSCP0-00P88 SSCE0-50Q8 SSCR0-50Q8 SSCP0-50Q88 8 mm 8 ms 50 8-pin Pigtail QD SSCE0-50P8 SSCR0-50P8 SSCP0-50P88 SSCE0-400Q8 SSCR0-400Q8 SSCP0-400Q mm 40 ms 60 8-pin Pigtail QD SSCE0-400P8 SSCR0-400P8 SSCP0-400P88 QD models: A model with a QD requires a mating cordset (see 480). For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SSCE4-500Q5) and Q88 with Q85 on pair model numbers (example, SSCP4-500Q85). For a 00 mm Euro pigtail QD, replace Q with P in model numbers (example, SSCP0-00P88). For a 5-pin 00 mm M/Euro pigtail QD with o EDM or TEST, replace Q8 with P5T on emitter or receiver (example, SSCE4-050P5T), and Q88 with P55T on pair model number (example, SSCP4-050P55T). For a 4-pin 00 mm M/Euro pigtail QD with no EDM or TEST functions (GD/PE via mounting), replace Q8 with P4T or Q88 with P44T (example, SSP4-050P44T). ESD-safe models: Add to the model number, prior to the QD option designation (example, SSCE4-500Q8). ESD-safe models are not available with the pigtail QD option. Optional housing finishes: Prior to the QD designation in the model number, add A for a clear (brushed) anodized aluminum finish, black endcaps (example, SSCE4-500AQ8); S for a nickel-plated (silver) finish, black endcaps (example, SSCE4-500SQ8), B for a black painted finish, black endcaps (example, SSCE4-500BQ8), W for a white painted finish, black endcaps (example, SSCE4-500WQ8) or SO for a safety orange painted finish, black endcaps (example, SSCE4-500SOQ8). Cascading system response time: To the response time of the slowest pair, add ms for each additional pair. Example: slowest pair s response time is 5 ms, and the system has three additional pairs (four pairs total), so the system maximum response time is 5 ms + 6 ms ( pairs x ms) = ms. A pair includes an emitter and receiver (example, SSCP0-00Q88). Emitters (example, SSCE0-00Q8) and receivers (example, SSCR0-00Q8) are also sold separately. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

5 EZ-SCREE 4 & 0 mm Resolution Kits You can purchase a kit that contains an emitter and receiver of equal length and resolution; brackets; and optional interfacing solution and quick-disconnect cordsets. Detailed information about individual kit components is as follows. Emitter and Receivers Page 474 Interfacing Options 50 Cordsets 480 Brackets 480 To Order:. Choose model, resolution and defined area.. Yellow housing is standard. To choose an optional housing, add designation listed below prior to the connection.. Choose the connection: Integral M/Euro-Style QD with or without TEST, or 00 mm M/Euro-Style pigtail with or without TEST. 4. Choose an optional interfacing solution, such as an or - interfacing model. 5. Choose one cordset for each sensor or two cordsets for a pair. M/Euro QD models (example, SSK0-50Q88) require mating M/Euro QD cordsets, such as: - QDE cordset with flying leads - DEER double-ended cordset - CSB series splitter cordset See for complete information and a current listing of accessories and options for kitting components. Call factory with questions regarding accessories Photoelectrics Fiber Optic Special Purpose Measurement & Inspection Vision Wireless ighting & Indicators Safety ight Screens Safety aser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control ACCESSORIES 480 Kit Model Key Model Style Kit Resolution Defined Finish Connection Interfacing QD Cordset Area Options ength Options S S K Q 8 8 R E 5 EZ-SCREE TYPE 4 4 or 0 mm TYPE 4 ow Profile 4 or 5 mm TYPE 0 mm GridS & Points PICO-GUARD Model Style SS = Safety ight Screen SSC = Cascading Safety ight Screen Defined Area 50 mm 00 mm 450 mm 600 mm 750 mm 900 mm 050 mm 00 mm 50 mm 500 mm 650 mm 800 mm 950 mm 00 mm 50 mm 400 mm Kit K = Kit SS Resolution 4 = 4 mm 0 = 0 mm Receiver & Emitter QD Options 50 mm not available in cascade models onger lengths not available in 4 mm resolution models. Q85 = Receiver with integral 8-pin M/Euro QD Emitter with integral 5-pin M/Euro QD with Test Q88 = Receiver with integral 8-pin M/Euro QD Emitter with integral 8-pin M/Euro QD P88 = Receiver with 8-pin M/Euro pigtail QD Emitter with 8-pin M/Euro pigtail QD Sensor Finish Blank = Yellow powder coat = ickel plated ESD A = Clear Anodized Aluminum S = ickel-plated (silver) B = Black powder coat W = White powder coat P55T = Receiver with 5-pin M/Euro pigtail QD (o EDM) Emitter with 5-pin M/Euro pigtail QD (o Test) P44T = Receiver with 4-pin M/Euro pigtail QD (o EDM) Emitter with 4-pin M/Euro pigtail QD (o Test) (GD/PE via mounting) QD Cordset ength Examples RE5 = 4.5 m, each RE5 = 7.6 m, each R5E5 = 4.5 m (Receiver) & 7.6 m (Emitter) R5E5 = 7.6 m (Receiver) & 4.5 m (Emitter) DD = 0. DEER-8D, each CD5 = CSB-M8M8 (Receiver) DEER-85D (8-pin Emitter) C8D5 = CSB-M88M8 (SS Receiver) DEER-85D (8-pin Emitter) CU5D5 = CSB-UT85M8 (SS Receiver) DEER-85D (8-pin Emitter) Interfacing Options = Interface Module, each ( O) = IM-T-A Interface Module, each ( O/ C) = -BG00--D-04 Contactors (0A), each 4 = BF80-04 Contactors (8A), each 5 = EZAC-R9-QE8 = AC Interface Box ( O), each 6 = EZAC-R-QE8 = AC Interface Box ( O/ C), each OTE: See notes under model number tables. ot all combinations are listed. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model numbers. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

6 EZ-SCREE (TYPE 4 & TYPE ) PICO-GUARD FIBER OPTIC (TYPE 4) EZ-SCREE 4 & 0 mm Resolution Specifications Supply Voltage at the Device 4V dc ±5% (use a SEV-rated supply according to E IEC60950) (The external voltage supply must be capable of buffering brief mains interruptions of 0 ms, as specified in E/IEC ) MACHIE SAFETY Residual Ripple Supply Current Response Time Remote Test Input (Optional available only on model SSE..-..Q5 emitters) Wavelength of Emitter Elements ± 0% maximum Emitter: 00 ma max. Receiver: 75 ma max., exclusive of OSSD and OSSD loads (up to an additional 0.5A each) and AUX output load (up to 75 ma) 9 to 56 milliseconds (see model number tables) Cascade Safety Stop Interface (CSSI): 40 milliseconds max. Test Mode is activated either by applying a low signal (less than V dc) to emitter TEST # terminal for a minimum of 50 milliseconds, or by opening a switch connected between TEST # and TEST # for a minimum of 50 milliseconds. Beam scanning stops to simulate a blocked condition. A high signal at TEST # deactivates Test Mode. High signal: 0 to 0V dc ow signal: 0 to V dc Input current: 5 ma inrush, 0 ma max. Infrared EDs, 950 nm at peak emission Recovery Time Blocked to clear (OSSDs turn O; varies with total number of sensing beams and whether Sync beam is blocked) EDM Input Reset Input Safety Outputs (OSSDs) Auxiliary (Aux.) Output Switching Capacity Controls and Adjustments Short Circuit Protection Electrical Safety Class (IEC 640) Operating Range Ambient ight Immunity Strobe ight Immunity Effective Aperture Angle (EAA) Beam (Sync Beam) All Other Beams 4 mm 09 to 800 ms to 0 ms 0 mm 8 to 495 ms 5 to 5 ms +4V dc signals from external device contacts can be monitored (one-channel, two-channel or no monitoring) via EDM and EDM terminals in the receiver. High signal: 0 to 0V dc at 0 ma typical ow signal: 0 to V dc The Reset input must be high for 0.5 to seconds and then low to reset the receiver. High signal: 0 to 0V dc at 0 ma typical ow signal: 0 to V dc Closed switch time: 0.5 to sec Two redundant solid-state 4V dc, 0.5 A max. sourcing OSSD (Output Signal Switching Device) safety outputs. (Use optional interface modules for ac or larger dc loads.) Capable of the Banner Safety Handshake. O-State voltage: Vin-.5V dc OFF-State voltage:.v dc max. (0-.V dc) Max. load capacitance:.0 µf Max. load inductance: 0 H eakage current: 0.50 ma maximum Cable resistance: 0 Ω maximum OSSD test pulse width: 00 to 00 microseconds OSSD test pulse period: 0 to 7 milliseconds (varies with number of beams) Switching current: A Current-sourcing (PP) solid-state output, 4V dc at 75mA max that follow the safety outputs (lockout function optional) Emitter: Scan Code selection: -position switch (code or ). Factory default position is code. Receiver: Scan Code selection: -position switch (code or ). Factory default position is code. Trip/atch Output selection: Redundant switches. Factory default position is T (Trip). EDM/ monitor selection: -position switch selects between - or -channel monitoring. Factory default position is. Reduced Resolution (-beam Floating Blanking): Redundant switches. Factory default is OFF. All inputs and outputs are protected from short circuits to +4V dc or dc common. III 4 mm models: 0. m to 6 m 0 mm models: 0. m to 8 m Range decreases with use of mirrors and/or lens shields: ens shields approximately 0% less range per shield. Glass-surface mirrors approximately 8% less range per mirror. See Accessory section for more information on a specific mirror, 76. > 0,000 lux at 5 angle of incidence Totally immune to one Federal Signal Corp. Fireball model FBPST strobe Meets Type 4 requirements per IEC 6496-, m Enclosure Materials: Extruded aluminum housing with yellow polyester powder (optional black or white or nickel-plated silver finish) and well-sealed, rugged die-cast zinc end caps, acrylic lens cover, copolyester access cover. Endcaps on silver models are also nickel-plated. Rating: IP65 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

7 EZ-SCREE 4 & 0 mm Resolution Specifications Operating Conditions Temperature: 0 to +55 C Relative humidity: 95% (non-condensing) Status Indicators (cont d) Emitter: One Bi-color (Red/Green) Status Indicator indicates operating mode, ockout or power OFF condition 7-segment Diagnostic Indicator ( digit) indicates proper operation, scan code or error code Receiver: Yellow Reset Indicator indicates whether system is ready for operation or requires a reset Bi-Color (Red/Green) Status Indicator indicates general system and output status Bi-Color (Red/Green) Zone Status Indicators indicates condition (clear or blocked beam) of a defined group of beams 7-Segment Diagnostic Indicator (-digit) indicates proper operation, scan code or error code, total number of blocked beams Mounting Hardware Emitter and receiver each are supplied with a pair of swivel end-mounting brackets. longer than 900 mm also include a swivel center-mount bracket. Mounting brackets are 8-gauge cold-rolled steel, black zinc finish. Shock and Vibration EZ-SCREE components have passed vibration and shock tests according to IEC This includes vibration (0 cycles) of 0-55 Hz at 0.5 mm single amplitude (0.70 mm peak-to-peak) and shock of 0 g for 6 milliseconds (6,000 cycles). Design Standards Designed to comply with Type 4 per IEC 6496; Category 4 Pe per E ISO 849-; SI per IEC 6508, SI C per IEC 606; Type 4 per U 6496-/- Certifications Photoelectrics Fiber Optic Special Purpose Measurement & Inspection Vision Wireless ighting & Indicators Safety ight Screens Safety aser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control Wiring Diagrams WD00, WD00, WD004, WD005, WD006, WD007, WD0, WD04, WD05, WD06, WD07, WD08, WD09 (pp ) EZ-SCREE TYPE 4 4 or 0 mm TYPE 4 ow Profile 4 or 5 mm TYPE 0 mm GridS & Points PICO-GUARD Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

8 EZ-SCREE (TYPE 4 & TYPE ) PICO-GUARD FIBER OPTIC (TYPE 4) MACHIE SAFETY Cordsets Euro QD See 690 ength 8-Pin 5-Pin 4.57 m QDE-85D QDE-55D 7.6 m QDE-85D QDE-55D 5. m QDE-850D QDE-550D.9 m QDE-875D QDE-575D 0.5 m QDE-800D QDE-500D Additional cordsets and information available. See 679. OTE: See 50 for interfacing solutions. Additional accessories are listed on 69. Euro QD Double-Ended See 69 ength 8-Pin 5-Pin 0. m DEER-8D DEER-5D 0.9 m DEER-8D DEER-5D.44 m DEER-88D DEER-58D 4.57 m DEER-85D DEER-55D 7.6 m DEER-85D DEER-55D 5. m DEER-850D DEER-550D.9 m DEER-875D DEER-575D 0.5 m DEER-800D DEER-500D For connection to safety BUS gateway/node a smart self-monitored safety module, safety controller or safety PC see 69. Euro QD Splitter See 69 ength 8-Pin 0 m CSB-M80M m CSB-M8M8.50 m CSB-M88M m CSB-M85M m CSB-M85M m CSB-UT85M8 Brackets 4 & 0 mm 4 & 0 mm Cascade STADS ECOSURES PAGE 7 PAGE 78 pg. 69 pg. 69 pg. 69 pg. 60 EZA-MBK- EZA-MBK- EZA-MBK-0 EZA-MBK- Additional brackets and information available. See 60. Standard brackets included with emitter/receiver. MIRRORS PAGE 76 ITERFACE ES SHIEDS PAGE 7 PAGE 50 Replacement Parts Model EZA-ADE- EZA-ADE- EZA-ADR- EZA-ADR- EZA-MBK- EZA-MBK- EZA-TP- EZA-RR- MGA-K- MGA-KS0- SMA-MBK- STP- STP-4 STP-5 Description Copolyester access cover with label for 4 or 0 mm resolution emitters Copolyester access cover with inverted label for 4 or 0 mm resolution emitters Copolyester access cover with label for 4 or 0 mm resolution receiver Copolyester access cover with inverted label for 4 or 0 mm resolution receiver Center bracket kit (includes bracket and hardware to mount to MSA Series stands) for 4 or 0 mm resolution EZ-SCREE Standard bracket kit with hardware (includes end brackets and hardware to mount to MSA Series stands) for 4 or 0 mm resolution EZ-SCREE Access cover security plate (includes screws, wrench) for 4 or 0 mm resolution EZ-SCREE External normally open reset switch with 8-pin/M Euro-style QD Replacement key for switch MGA-KS0- Panel-mount keyed normally open reset switch SSM Series Mirror Bracket Kit 4 mm test piece (4 mm resolution systems) 0 mm test piece (4 mm resolution systems with -beam Reduced Resolution and for 0 mm resolution systems) 60 mm test piece (0 mm resolution systems with -beam Reduced Resolution) ote: See Installation manual p/n 85 for complete list of replacement parts and accessories. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

9 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD00 EZ-SCREE System (Type 4) Emitter 8-Pin Euro-Style (Standard Emitter) REFERECE EZ-SCREE 4 & 0 mm models with 8-pin M/Euro QD EZ-SCREE Grid & Point models with 8-pin M/Euro QD 8-pin male Euro-style Bn (#) Or (#) Or/Bk (#) n.c. n.c. n.c. n.c. n.c. +4V dc 0V dc OTE: Pins,, 4, 5, and 8 are not connected, or are paralleled to same color from the 8-pin receiver cable (see Section.7 and Figure -6). Emitter 5-Pin Euro-Style (Emitter with Test) EZ-SCREE 4 & 0 mm models with 5-pin M/Euro QD 5-pin male Euro-style +4V dc 0V dc EZ-SCREE Grid & Point models with 5-pin M/Euro QD Bn (Pin #) Gn/Ye (#5) Bu (#) See Euro-style connectors on 68 for female mating cordset. Bk (#4) Wh (#) Jumper or open to test WD00 EZ-SCREE P System (Type 4) Emitter 8-Pin Euro-Style (Reset Hookup) 8-pin male Euro-style face view Bn (Pin #) +4V dc 0V dc Page 48 EZ-SCREE P 4 & 5 mm models with 8-pin M/Euro QD OTE: Pins,, 4 and 5 either are not connected (n.c), or are paralleled to same color from the 8-pin receiver cable. Or (#) Or/Bk (#) n.c. n.c. Close to reset n.c. n.c. Emitter 8-Pin Euro-Style (Test Hookup) +4V dc 0V dc EZ-SCREE P 4 & 5 mm models with 8-pin M/Euro QD 8-pin male Euro-style face view Bn (Pin #) See Euro-style connectors on 68 for female mating cordset. OTE: Pins,, 4 and 5 either are not connected (n.c), or are paralleled to same color from the 8-pin receiver cable. Or (#) Or/Bk (#) n.c. n.c. Open to test n.c. n.c. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

10 WD00 EZ-SCREE System (Type 4) Receiver with Solid-State OSSDs, FSDs and -Channel EDM +4V dc 0V dc Accessories Reference Hookups Wiring Diagrams Glossary 8-pin male Euro-style Bn (Pin #) +4V dc International Reps Ground 0V dc EZ-SCREE 4 & 0 mm models with 8-pin M/Euro QD EZ-SCREE P 4 & 5 mm models with 8-pin M/Euro QD EZ-SCREE Grid & Point models with 8-pin M/Euro QD Or (#) OSSD OSSD Reset EDM FSD FSD Or/Bk (#) EDM Single-Channel Safety Stop Circuit Dual-Channel Safety Stop Circuit Trip (auto reset) not connected. See Euro-style connectors on 68 for female mating cordset. OTE: Do not exceed OSSD maximum load capacitance specification. WD004 EZ-SCREE System (Type 4) Receiver with Solid-State OSSDs and -Channel EDM of SC- +4V dc 0V dc Receiver 8-pin male Euro-style Bn (Pin #) +4V dc Ground 0V dc EZ-SCREE 4 & 0 mm models with 8-pin M/Euro QD EZ-SCREE P 4 & 5 mm models with 8-pin M/Euro QD EZ-SCREE Grid & Point models with 8-pin M/Euro QD OTE: EZ-SCREE receiver DIP switches are configured for Trip (T) output and -channel EDM (E). If the Auxiliary output is to be used, configure the EZ-SCREE receiver for -channel EDM (E) and connect pin # (Or) to +4V dc. Or (#) Or/Bk (#) OSSD OSSD Reset EDM EDM Jumper S S S SC- Safety Controller A A A A Trip (auto reset) not connected. See Euro-style connectors on 68 for female mating cordset. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

11 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD005 EZ-SCREE System (Type 4) -Channel EDM of Interface Module REFERECE EZ-SCREE 4 & 0 mm models with 8-pin M/Euro QD EZ-SCREE P 4 & 5 mm models with 8-pin M/Euro QD EZ-SCREE Grid & Point models with 8-pin M/Euro QD Terminal ocations Receiver 8-pin male Euro-style face view Bn (Pin #) Or (#) Or/Bk (#) +4V dc Reset Aux. out + S K K S4 Y S S Y4 0V dc S S Y Y Y Y Machine Control Feedback (optional) Y Y S S4 Arc Suppressors. See manual for specific warnings. Trip (auto reset) not connected. See Euro-style connectors on 685 for female mating cordset. WD006 EZ-SCREE System (Type 4) -Channel EDM of Interface Module 8-pin male Euro-style +4V dc 0V dc Bn (Pin #) EZ-SCREE 4 & 0 mm models with 8-pin M/Euro QD EZ-SCREE P 4 & 5 mm models with 8-pin M/Euro QD EZ-SCREE Grid & Point models with 8-pin M/Euro QD Terminal ocations Or (#) Or/Bk (#) Reset S S4 K K S S S S Y Y Y4 Y Y Y Machine Control Y Y S S4 Arc Suppressors. See manual for specific warnings. Trip (auto reset) not connected. See Euro-style connectors on 685 for female mating cordset. Feedback (optional) Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

12 WD007 EZ-SCREE System (Type 4) Hookup of E-Stop Button to the last Receiver in a Cascade E-stop E-stop E-stop Accessories Reference Hookups Wiring Diagrams Glossary International Reps EZ-SCREE 4 & 0 mm models EZ-SCREE P 4 & 5 mm models awg EZ-SCREE 4 & 0 mm model shown bn wh bu bk EZ-SCREE P 4 & 5 mm EZ-SCREE 4 & 0 mm RDP6G-4..D Cordset Pinout Combination DEPEF-8..D/QDER4-8..D Cordset Pinout Ch a Pin # (Ch a) Pin #5 (ch b) White Ch a Pin # n.c. Pin #6 n.c. Ch b Pin # n.c. Pin #7 n.c. Black Ch b Pin #4 Black (Ch b) Pin #8 White (Ch a) Other cordset options may also be used, see above for more information. Standard M/Euro-style cordsets (8-pin male QD) can also be used, although pin number/ color must be verified. QDER4-8..D Cordset Pinout Pin # (Ch a) Pin # Black (Ch b) Pin # (Ch b) Pin #5 n.c Pin #6 n.c. Pin #7 n.c. Pin #4 n.c. Pin #8 White (Ch a) Standard M/Euro-style cordsets (8-pin male QD) can also be used, although pin number/ color must be verified. WD008 EZ-SCREE System (Type ) Emitter EZ-SCREE Type 0 mm models 8-pin male Euro-style Bn (#) +4V dc 0V dc Or (#) Or/Bk (#) n.c. n.c. n.c. n.c. n.c. OTE: Pins,, 4, 5 and 8 are not connected, or are paralleled to same color from the receiver cable. See Euro-style connectors on 685 for female mating cordset. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

13 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD009 EZ-SCREE System (Type ) Receiver with Solid-State OSSDs, FSDs and Power Monitoring REFERECE EZ-SCREE Type 0 mm models Receiver 8-pin male Euro-style Bn (Pin #) +4V dc Ground 0V dc OSSD OSSD Manual Test or Reset Automatic (atch or ockout) Test FSD FSD +4V dc 0V dc Reset/Test Or (#) Or/Bk (#) OTE: Pins and are not connected, or are paralleled to same color from the emitter cable and properly terminated n.c. n.c. Single-Channel Safety Stop Circuit Dual-Channel Safety Stop Circuit FSD Monitoring Circuit See Euro-style connectors on 685 for female mating cordset. OTE: Do not exceed OSSD maximum load capacitance specification. WD00 EZ-SCREE System (Type ) Power Monitoring of Interface Module 8-pin male Euro-style +4V dc 0V dc Bn (Pin #) +4V dc Ground EZ-SCREE Type 0 mm models 0V dc OSSD Terminal ocations OSSD Reset/ Test.C. S S4 Y K K S S Y4 OTE: Pins and are not connected, or are paralleled to same color from the emitter cable and properly terminated. S S Y Y Y Y S S4 Or (#) Or/Bk (#) n.c. n.c. /+V dc Machine Control Arc Suppressors. See manual for specific warnings. See Euro-style connectors on 685 for female mating cordset. Y Y Monitoring /-V dc Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

14 WD0 Accessories EZ-SCREE System (Type 4) Reference Emitter Receiver with Solid-State OSSDs, FSDs and -Channel EDM Hookups Wiring Diagrams +4V dc 0V dc Glossary International Reps EZ-SCREE Grid & Point with terminal chamber hookup ( with M/Euro QD, see WD00) +4V dc 0V dc EZ-SCREE Emitter PE dc Com +4V dc TEST 4 TEST 5 (ot Used) 6 +4V dc 7 dc Com 8 PE 9 or Auxiliary power connections Open to test EZ-SCREE Receiver PE + + dc Com +4V dc (ot Used) 4 RESET 5 Single-Channel Safety Stop Circuit EDM 6 EDM 7 OSSD 8 OSSD 9 FSD Reset FSD Dual-Channel Safety Stop Circuit OTE: Do not exceed OSSD maximum load capacitance specification. Arc Suppressors. See manual for specific warnings. WD0 4V dc EZ-SCREE System (Type 4) -Channel EDM of Interface Module -Channel EDM of Interface Module 0V dc +4V dc 0V dc EZ-SCREE Grid & Point with terminal chamber hookup ( with M/Euro QD, see WD00-WD006) EZ-SCREE Receiver PE dc Com +4V dc (ot Used) 4 RESET 5 EDM 6 + EDM 7 + OSSD 8 OSSD 9 Reset EZ-SCREE Receiver PE dc Com +4V dc (ot Used) 4 RESET 5 EDM 6 + EDM 7 + OSSD 8 OSSD 9 Reset Terminal ocations S S Y Y Machine Control S4 S + K S + K S Y Y Y Y Machine Control S4 S + K S + K S Y Y Y Y Y Y S S4 Arc Suppressors. See manual for specific warnings. Feedback (optional) Arc Suppressors. See manual for specific warnings. Feedback (optional) Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

15 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD0 EZ-SCREE AC Interface Box EZAC-R9-QE8 Hard-Wired with O and EDM REFERECE EZAC-R9-QE8 Page 76 -ch. -ch. EDM X X X X4 P P P P 4 5 P5 Connections (Hand Wired) EZAC-R9-QE8 (ine) P5 00-0V ac (eutral) P5 / PT threads for outputs (Gnd) P5 Machine Control K K 4 4 / PT threads for AC inputs 8-pin female Euro-style QD to emitter/receiver 4 -ch. -ch. (EDM) X X -Channel EDM Hookup Monitoring Contacts (EDM) X X4 -ch. -ch. (EDM) X X -Channel EDM Hookup Monitoring Contacts X (EDM) X4 X o EDM -ch. -ch. (EDM) X Arc Suppressors. See manual for specific warnings. (EDM) X X4 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

16 WD04 EZ-SCREE AC Interface Box EZAC-R-QE8 Hard-Wired with O, C and EDM Accessories Reference Hookups Wiring Diagrams Glossary International Reps EZAC-R-QE8 Page 76 Connections (Hand Wired) / PT threads for outputs / PT threads for AC inputs 8-pin female Euro-style QD to emitter/receiver Arc Suppressors. See manual for specific warnings. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

17 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD05 EZ-SCREE System (Type 4) EZAC-R5A-QE8-Q58-Mini-Style QD with O, SPDT and -Channel EDM REFERECE EZAC-R5A-QE8-QS8 Page 76 EZAC-R5A-QE8-QS8 (eutral) P5 (ine) P5 (Gnd) P5 Bu Bn Gn/Ye Machine Control 00-0V ac -Pin Mini-Style Power Connector Male Face View Mating Cordset: QDS-..C Pin Color Function Gnd/PE ine eutral 8-pin male Mini-style for outputs -pin male Mini-style for AC inputs Connections (8-Pin Mini) 8-pin female Euro-style QD to emitter/receiver Arc Suppressors. See manual for specific warnings. K K X (EDM) X X (EDM) X Gn/Ye Bk Bn Wh Vi Bu Or Or/Bk.O. (to load).o..o. (to load).c. Aux (see Warning).O. +4V dc (switched) EDM amp Monitoring Contacts 8-Pin Mini-Style Output Connector Male Face View Orange/Black Orange Violet Black White Mating Cordset: QDS-8..C Pin Color Function.O. Orange/Black +4V dc (EDM) Orange EDM 4 White.O. (to load) 5 Black.O. (to load) 6 Common 7 Gnd/PE 8 Violet.C. Aux. WD06 EZ-SCREE AC Interface Box EZAC-R8-QE8-QS5 Mini-Style QD with O, C and Power Monitoring 784 EZAC-R8-QE8-QS5 5-pin male Mini-style for outputs -pin male Mini-style for AC inputs Connections (5-Pin Mini) 8-pin female Euro-style QD to emitter/receiver Page 76 EZAC-R8-QE8-QS5 (eutral) P5 (ine) P5 (Gnd) P5 K K 4 4 X (EDM) X X (EDM) X4 5 4 Bu Bn Gn/Ye Gn/Ye Wh Bk Bu Bn Monitoring Contacts.O. (b).o. (a).c. (b).c. (a) Machine Control 00-0V ac -Pin Mini-Style Power Connector Male Face View Mating Cordset: QDS-..C Pin Color Function Gnd/PE ine eutral 5-Pin Mini-Style Output Connector Male Face View Black White Mating Cordset: QDS-5..C Pin Color Function Black.O. (a).c. (a) Gnd/PE 4.C. (b) 5 White.O. (b) Arc Suppressors. See manual for specific warnings. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

18 WD07 EZ-SCREE AC Interface Box EZAC-R0-QE8-QS5 Mini-Style QD with O and Power Monitoring Accessories Reference Hookups Wiring Diagrams EZAC-R0-QE8-QS5 Page 76 EZAC-R0-QE8-QS5 (eutral) P5 (ine) P5 (Gnd) P5 Bu Bn Gn/Ye Monitoring Contacts Machine Control 00-0V ac -Pin Mini-Style Power Connector Male Face View Mating Cordset: QDS-..C Pin Color Function Gnd/PE ine eutral Glossary International Reps 5-pin male Mini-style for outputs Connections (5-Pin Mini) K K Gn/Ye Wh Bk Bu.O. (b).o. (a).o. (b) 5-Pin Mini-Style Output Connector Male Face View Black White Mating Cordset: QDS-5..C Pin Color Function Black.O. (a).c. (a) Gnd/PE 4.C. (b) 4 Bn.O. (a) 5 White.O. (b) -pin male Mini-style for AC inputs 8-pin female Euro-style QD to emitter/receiver Arc Suppressors. See manual for specific warnings. X (EDM) X X (EDM) X4 WD08 EZ-SCREE AC Interface Box EZAC-E-QE.. Hard-Wired Emitters with or without Test EZAC-E-QE8 EZAC-E-QE5 Page 76 EZAC-E-QE8 or EZAC-E-QE5 Connections 5-Pin Euro TEST function available only for model EZAC-E-QE5 (ine) (eutral) { (Gnd) TEST # TEST # 90-0V ac TEST / PT threads AC inputs 5-pin Euro-style QD to emitter 8-Pin Euro / PT threads 8-pin AC inputs Euro-style QD to emitter Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)

19 HOOKUPS WIRIG DIAGRAMS REFERECE CHARTS GOSSARY ITERATIOA REPS WD09 EZAC-E-QE8-QS Mini-Style QD Emitter EZ-SCREE AC Interface Box EZAC-E-QE5-QS5 Mini-Style QD Emitter with Test REFERECE EZAC-E-QE8-QS EZAC-E-QE5-QS5 Page 76 EZAC-E-QE8-QS (ine) (eutral) (Gnd) 90-0V ac EZAC-E-QE5-QS5 (ine) (eutral) (Gnd) TEST # 4 Black 90-0V ac TEST Connections TEST # 5 White (-Pin Mini) -pin male Mini-style AC inputs 8-pin Euro-style QD to emitter (5-Pin Mini) -Pin Mini-Style Power Connector Male Face View Mating Cordset: QDS-..C Pin Color Function Gnd/PE ine eutral 5-Pin Mini-Style Output Connector Male Face View Black White Mating Cordset: QDS-5..C Pin Color Function Black.O. (a).c. (a) Gnd/PE 4.C. (b) 5 White.O. (b) 5-pin male Mini-style AC inputs 5-pin Euro-style QD to emitter WD00 AG4 aser Scanner AG4 to FSD & FSD +4V dc 0V dc AG4 Page 98 X AG4 0V dc Restart (Reset) +4V dc 4 FP Alarm 5 (Auxiliary ) 6 FP 7 FP 8 FP4 9 Violet Orange Wht/Blk Fuse.6A + 0 OSSD OSSD Black White Shield FSD FSD Warning: Monitoring FSDs FSD s must be monitored for proper operation. -channel EDM can only be used when the scanner is configured for manual reset. See manual for more information. Alarm 5 (Auxiliary ) Figure shows Field Pair # selected. See manual for further information on Field Pair Switchover See manual for further information on the non-safety Alarm/Auxiliary outputs. Single-Channel Safety Stop Circuit Dual-Channel Safety Stop Circuit OTE: Do not exceed OSSD maximum load capacitance specification. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (650) Outside ocal Area: (800)