Photoelectric Sensors 50 Series

Transcription

1 August 007 PG.05E.08.T.E Customize These High Performance Sensors with Interchangeable Outputs and Logic Functions Contents Overview Model Selection, Sensors Model Selection, Compatible Cables Model Selection, Output Devices Model Selection, Logic Modules Model Selection, Accessories Wiring Diagrams Specifications Dimensions Cutler-Hammer Photoelectric Sensors from Eaton s electrical business offer flexibility, durability and high optical performance in a cost-effective selfcontained package. Choose from four output device modules, four logic function modules, five sensing modes and two types of connection to tailor the sensor to exactly meet your needs. A removable sealed cover allows access to the interchangeable modules. Sensors are available in thru-beam, reflex, polarized reflex, diffuse reflective and fiber optic sensing modes. Each sensor features a builtin swivel bracket for easy mounting and to allow precise adjustment of the sensor alignment. Approvals UL Listed CSA Certified Unless otherwise noted, the products contained in this document are not designed or intended for use in human safety applications. High Performance Optics Built-In Ball-Swivel Bracket Product Features Glass Fiber Optic Models Choose from Cable or Built-In Mini- Output Indicator LED Removable Cover Allows Access to Interchangeable Output Devices and Logic Modules High optical performance includes 00-foot (30.5m) thru-beam range and 6-foot (.8m) diffuse reflective range Output options include a Amp SPDT relay All units offer light/dark selection Logic options include time delay, one-shot and motion detection Thru-beam models feature an infrared sensing beam along with a visible red LED behind the lens in the source unit to aid in sensor alignment Fiber optic sensors operate in thru-beam or diffuse reflective mode depending on the fiber optic cable selected Glass fiber optic cables plug into NEMA 4 rated sockets on the front of the sensor. Sockets are leakproof even when the fiber optic cables are not plugged in Fully potted construction for use in areas subject to washdown, high shock and/or vibration Choice of pre-wired power cable or built-in mini-connector versions. Standard pre-wired cable length is 6 feet (.8m) Built-in, patented, 360 rotation 0 tilt ball-swivel base For Customer Service in the U.S. call -877-ETN CARE (386-73), in Canada call For Application Assistance in the U.S. and Canada call PG.05E.08.T.E

2 August 007 Model Selection Sensors Range Thru-Beam 5V AC 70 feet (.3m) Detector order One, One Detector, One Logic Module and One Output Device (Page 5) Minimum object size Is 0.4 x 0.7 Inches (0 x 8 mm) Sensing Optimum Range Field of View Thru-Beam Range Component 00 feet (30.5m) 70 feet (.3m) 00 feet (30.5m) 0 30V DC 70 feet (.3m) 00 feet (30.5m) Standard Reflex 5V AC 30 feet (9.m) feet (0.03 m) feet (0.03 5m) feet (0.03 m) feet (0.03 5m) feet (0.03 m) feet (0.03 5m) 0 5 feet (0 4.6m) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) 4 inch (0 mm) inch (5 mm) Sensing Beam Infrared (with visible red LED to aid Connection Type Catalog Number 6-foot Cable 55A-65 -pin Mini- 55A-650 Detector alignment) 6-foot Cable 5B-65 5-pin Mini- 5B foot Cable 55A-65 -pin Mini- 55A-650 Detector 6-foot Cable 50B-65 5-pin Mini- 50B foot Cable 55A-65 -pin Mini- 55A-650 Detector 6-foot Cable 5B-65 5-pin Mini- 5B foot Cable 55A-65 -pin Mini- 55A-650 Detector 6-foot Cable 50B-65 5-pin Mini- 50B foot Cable 55A-657 -pin Mini- 55A-6507 Detector 6-foot Cable 5B pin Mini- 5B foot Cable 55A-657 -pin Mini- 55A-6507 Detector 6-foot Cable 50B pin Mini- 50B-6507 Infrared 6-foot Cable 450B-65 5-pin Mini- 450B-650 Sensor 30 feet (9.m) 0 5 feet (0 4.6m) inch (5 mm) 6-foot Cable 450B-65 5-pin Mini- 450B-650 order Sensor, Retroreflector, One Logic Module and One Output Device (Page 5) (See PG.05E.7.T.E) 0 30V DC 30 feet (9.m) 0 5 feet (0 4.6m) inch (5 mm) 6-foot Cable 450B pin Mini- 450B-6507 Ranges based on 3-inch retroreflector for reflex sensors, 90% reflectance white card for diffuse reflective sensors. See Excess Gain graphs on Page 4. See listing of compatible connector cables on Page 4.

3 August Model Selection Sensors (Continued) Operating Sensing Range Polarized Reflex 5V AC 5 feet (4.6m) Optimum Field of View Sensing Range Beam feet (0..8m) inch (5 mm) Connection Type Catalog Number Visible Red 6-foot Cable 45B-65 5-pin Mini- 45B-650 Retroreflector (Not Included) Sensor order Sensor, Retroreflector, One Logic Module and One Output Device (Page 5) (See PG.05E.7.T.E) 5 feet (4.6m) 0 30V DC 5 feet (4.6m) feet (0..8m) feet (0..8m) inch (5 mm) inch (5 mm) 6-foot Cable 45B-65 5-pin Mini- 45B foot Cable 45B pin Mini- 45B-6507 Diffuse Reflective 5V AC 0 inches (54 mm) order One Logic Module and One Output Device (See Page 5) 4 inches (60 mm) 7 inches (88 mm) 0 inches (54 mm) 4 inches (60 mm) 0 30V DC 0 inches (54 mm) 4 inches (60 mm) 7 inches (88 mm) inches (6 7 mm) 8 inches (5 03 mm) 36 inches (5 94 mm) inches (6 7 mm) 8 inches (5 03 mm) inches (6 7 mm) 8 inches (5 03 mm) 36 inches (5 94 mm) inch (5 mm) 0 inches (54 mm) inch (5 mm) 0 inches (54 mm) 5.5 inch (40 mm) 4 inches (60 mm) inch (5 mm) 0 inches (54 mm) inch (5 mm) 0 inches (54 mm) inch (5 mm) 0 inches (54 mm) inch (5 mm) 0 inches (54 mm) 5.5 inch (40 mm) 4 inches (60 mm) Fiber Optic 5V AC Depends on Fiber Selected Infrared 6-foot Cable 350B-65 5-pin Mini- 350B foot Cable 35B-65 5-pin Mini- 35B foot Cable 35B-65 5-pin Mini- 35B foot Cable 350B-65 5-pin Mini- 350B foot Cable 35B-65 5-pin Mini- 35B foot Cable 350B pin Mini- 350B foot Cable 35B pin Mini- 35B foot Cable 35B pin Mini- 35B-6507 Infrared 6-foot Cable 550B-65 5-pin Mini- 550B-650 Glass Fiber Optic Cables Not Included (See PG.05E.5.T.E) Depends on Fiber Selected 6-foot Cable 550B-65 5-pin Mini- 550B-650 order One Logic Module and One Output Device (See Page 5) 0 30V DC Depends on Fiber Selected 6-foot Cable 550B pin Mini- 550B-6507 Ranges based on 3-inch retroreflector for reflex sensors, 90% reflectance white card for diffuse reflective sensors. See Excess Gain graphs on Page 4. Polarized sensors may not operate with retroreflective tape. Test selected tape before installation. Ranges using standard 0.5-inch diameter fiber optic cable: Thru-beam mode inches (305 mm); Diffuse reflective mode.5 inches (57 mm). See listing of compatible connector cables on Page 4.

4 4 August 007 Excess Gain RANGE (m) RANGE (mm) RANGE (feet) Thru-Beam. 50B detectors using 55A sources. 5B detectors using 55A sources RANGE (inches) Diffuse Reflective (90% reflective white card). 35B. 35B B 3 RANGE (m) RANGE (mm) RANGE (feet) Reflex (3-inch diameter retroreflector). 450B. 45B RANGE (inches) Fiber Optic (standard 0.5-inch diameter fiber optic cable shown). Thru-beam mode. Diffuse reflective mode (90% reflective white card) Model Selection Compatible Cables Standard Cables Mini Style Mini Style Straight Female Style Number of Pins Gauge Length Catalog Number Pin Configuration/Wire Colors (Face View Female Shown) -pin 6 AWG 6 feet (m) CSMSDCY60 -White -Black Current 600V 3-pin: 3A 4-pin 6 AWG 6 feet (m) CSMS4F4CY60 -Black -White 3-Red 4-Green For a full selection of connector cables, see PG T.E. Stocked product, typical order quantities guaranteed in stock. 5-pin 6 AWG 6 feet (m) CSMS5D5CY60 -White -Red 3-Green 4-Orange 5-Black

5 August Model Selection Output Devices (One required for each sensor except thru-beam source) Description Sensors Used With Switching Output Type Output Rating OFF-State Leakage ON-State Drop Catalog Number Plug-In Relay 5 or 30V AC sensors AC or DC loads. For loads under 40 ma use solid-state switch below SPDT A at 5V AC resistive load 853B-650 (May be wired in series or parallel with other switches) Solid- State Switch 5V AC sensors AC or DC loads SPST VMOS solidstate relay 68 ma max. resistive load, AC or DC 50 µa max. 4V max. 856B-650 (May be wired in series or parallel with other switches) Sink/ / TTL 5 or 30V AC sensors AC loads only SPST isolated output, triac solidstate relay DC sensors DC loads only Open collector transistor 50 ma max. resistive load, AC only 0.5A max. resistive or inductive 00 µa max. 3V max. 8563A µa max. at 30V DC Less than V at rated load 8587A-650 Plug-in relay has a life expectancy of 00,000 operations at rated load all other output devices have unlimited life expectancy when used within rated load limits. Sink (NPN) SPST switch to DC common provides dry contact and NPN open collector output. (PNP) SPST to positive DC power supply. Model Selection Logic Modules (One required for each sensor except thru-beam source) Description Operation Operating Mode(s) (Switch Selectable) Ranges Catalog Number Light/Dark Provides selection of light or dark operation. Use this module only when no other logic function is required, as all four models shown here have a light/dark select switch. 850B-650 Time Delay Delays state changes of the sensor output signal by a useradjustable time period. On and Off Delay 0.00 to 0.5 seconds to.5 seconds 0.05 to 5 seconds 85B-650 One-Shot Produces a pulse when triggered length of pulse is useradjustable. Triggering on leading or trailing edge of target is switch selectable. Standard One-Shot Retriggerable One-Shot Delayed One-Shot On-Delay One-Shot to seconds to 0.40 seconds 0.3 to 3. seconds.5 to 5 seconds 85A-650 Motion Detection Performs same function as a speed switch. Triggering on leading or trailing edge of target is switch selectable. Underspeed Overspeed Under/Overspeed 00 to,000 CPM 50 to 500 CPM 9 to 80 CPM.4 to 3 CPM 853A-650

6 6 August 007 Model Selection Accessories Description Catalog Number Approximate Dimensions in Inches (mm) Except Where Noted Allows sensor to replace Photoswitch 5000 Series terminal base and normal duty bracket 650A-650 Allows sensor to replace Photoswitch 5000 Series cable base and normal duty bracket 650A (7.6) C A B.00 (5.4) Typ..65 (67.3).8 (30.0).00 (50.8) Allows sensor to replace Photoswitch 4000 Series selfcontained models and bracket 650A (.7) 0.8 (5.5) Thickness: GA 0.8 (7.) Typ. Catalog Number Dimensions in Inches (mm) A B C 650A (3.0) 650A (43.3).83 (7.9) 4.04 (0.6).09 (7.7).5 (54.6) Allows sensor to replace Banner Multibeam (all models) and SMB700 bracket 650A-6505 NOTE: Dimensions in Inches Retroreflectors Retroreflectors and retroreflective tape See PG.05E.7.T.E Cables Lens Protector For use with connector version sensors Lens protector kit. Clear glass cover fits snugly over the sensor lens to protect it from damage. Ideal for environments in which damage to the lens is likely. Not recommended for use with diffuse reflective sensors. See PG T.E 450B-750 Stocked product, typical order quantities guaranteed in stock.

7 August Wiring Diagrams (Pin numbers are for reference only, rely on pin location when wiring) Operating Models Cable Models Mini- Models (Face View Male Shown) 5V AC or Thru-Beam BN BU L L L L All others BN RD BK YL BU L N.O. Out Relay COM N.C. Out L L N.O. Out N.C. Out L Relay COM 0 30V DC Thru-Beam RD BK +V (-) (-) +V All others RD +V GN WH BK (-) (-) +V Specifications Input 5V AC Models Models 0 30V DC Models 90 3V AC, 60 Hz 00 3V AC, 50 Hz 80 64V AC, 60 Hz 00 64V AC, 50 Hz 0 30V DC, 35 ma Power Dissipation W W Light/Dark Operation Switch selection on logic module Operating Temperature Thru-Beam: - to +58 F (-30 to +70 C) All Others: -40 to +58 F (-40 to +70 C) Humidity 95% relative humidity, non-condensing Case Material Noryl (avoid exposing to chlorinated, halogenated or aromatic hydrocarbons) Lens Material Nylon Vibration 5g or 0.06-inch displacement, whichever is less, over 0 Hz to khz (when using 853B relay 0.04-inch displacement between 0 55 Hz) Shock 40g for 0 ms and 500g for ms, / sine wave pulse Sensitivity Adjustment 0: Ratio Enclosure Ratings NEMA, 3, 4, and 3 Sunlight Immunity 00 foot Thru-Beam models: 6,000 foot-candles All other models: 0,000 foot-candles Output See output device specifications Sensor Type AC Thru-Beam Models All Other AC Models Output Device Installed 853B 856B 8563A 853B 856B 8563A Response Time Dark-to-Light ms 5 ms 0 ms ms 5 ms 0 ms Light-to-Dark 8 ms ms 6 ms ms 5 ms 0 ms DC Thru-Beam Models 8587A ms 8 ms All Other DC Models 8587A ms ms NOTE: Our products conform to NEMA tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications. If you have questions about a specific application, contact Eaton s Cutler-Hammer Sensor Applications Department at Approximate Dimensions in Inches (mm) Sensors 0.40 (0.).5 (54.6).40 (35.6) 0.55 (4.0) 0.3 (5.8) 360 Rotation.36 (34.5).08 (5.8) (30.0).64 (4.7).4 (35.8).05 (5.) 3.9 (8.0) Fiber Optic Models Top View Front View 0.40 (0.) 0.0 (5.9).6 (4.) 0.0 (5.) DIA, PL (#0 Clearance Hole) 0.6 (4.) 0 Beam Status LED /-4 NPT