LC Uniboot V4 Connector With Hard Push Pull TECHNICAL SPECIFICATION

Transcription

1 Version:. Document Number : SW-K Date(yyyy/mm/dd): LC Uniboot V4 Connector With Hard Push Pull For Duplex Round Cable TECHNICL SPECIFICTION pproved by Checked by Prepared by Motofuji Liu xiao hui Tom TECHNOLOGIES (SZ) CO.,LTD. NO.3, Nan Xin Rd, Nanling Village Community, Nan Wan Street, Long Gang District, Shenzhen City, China Tel: (86-755) Fax: (86-755) /0

2 Version:. Document Number : SW-K Date(yyyy/mm/dd): Index The provisions of this specification LC uniboot V4 connector With Hard Push Pull for buffered fiber technical requirements measuring and test method label packing transportation and storage requirements Copyright belongs to Suncall Technologies (SZ) CO.,Ltd. ll right reserved The information contained herein shall not be reproduced or disclosed to any third party without the express written consent of Suncall Technologies (SZ) CO.,Ltd. The specifications contained herein are subject to change without notice Please address any questions, comments and suggestions to: MERIC, INC. CORPORTION(JPN) 6 Johns Road, Suite 4, Nishiura-cho, Umezu,Ukyo-ku, Kyoto, Greer, SC Japan Tel: (00) Tel: +8(75)-88-8 Fax:(00) Fax:+8(75) CO.,(H.K)LTD. Units 8-8, Millennium City, No. 378 Kwun Tong Road, Kwun Tong, Kowloon, Hong Kong TECHNOLOGIES (SZ) CO.,LTD. NO.3, Nan Xin Rd, Nanling Village Community, Nan Wan Street,Long Gang District Shenzhen City, China Tel: (85) Tel: (86-755) Fax:(85) Fax: (86-755) /0

3 Version:. Document Number : SW-K Date(yyyy/mm/dd): Section CONTENTS Page Part Number...4 General Specifications Physical Dimensions ppearance Part and Materials Feature Mechanical Characteristics Environmental Characteristics Standard Reference Packing Identification Handling and care Conditions of Storage Precautions of Use Disposal Drawing...9 3/0

4 Version:. Document Number : SW-K Date(yyyy/mm/dd): Part Number The Connector is categorized to the following classification scheme L C X H P X X X X X X X X X X W H X X X X X Table : Structure of the product name No. Item pplicable type Sort LC:LC Connector Mode & Core S : SM M: MM 3 Boot Type HP: UBV4 Hard Push Pull 4 Product Status 5 Cable Specifications 6 Body Color 7 Ferrule type and ID 8 Concentricity K : P : Kit Pre ssy 0: Ф.0mm cable 30: Ф3.0mm cable BL:Blue Q:qua BK: Black BG: Beige HV: Heather Violet VT: Violet F55:Flat 5.5um F60:Flat 6.0um 0: Concentricity.0um 40: Concentricity 4.0um 9 Boot Color WH: White (Uniboot Standard) 0 Dust Cap Option Shrink Tube Option S : Square Dust Cap T: T Dust Cap E : ESD Square Dust Cap W: White (Uniboot Standard) TW: Serial Number XX - EXMPLE: LCSHPP0BLF550WHSW00 White Thin Tube ( Special Option) (LC Uniboot V4 Singlemode Φ.0mm Hard Push Pull Connector ssy Blue 5.5um Ferrule With White Boot nd White Shrink Tube) 4/0

5 Version:. Document Number : SW-K Date(yyyy/mm/dd): General specifications - Physical Dimensions The product shall meat the specification in drawings In accordance with IEC Type LC connector family In accordance with TI-EI Standard-Type LC connector In accordance with JIS C :009 Type LC Connector Family - ppearance There should be no burr peeling of plating or scratches that affect the product There should be no dirt scratches surface flashing sink mark -3 Part and Materials Table shows the parts and materials of LC Uniboot V4 with Hard Push Pull Ø.0mm Connector flame retardant grade Each part no.refers to drawing Table Parts materials and flame retardant grade No. Part Name Material Flaming rate UBV4 Square Dust Cap PC/BS UL94 V0 UBV4 Housing PEI UL94 V0 3 UBV4 Extender Cap PEI UL94 V0 4 LC Ferrule Sub-ssy Zr+Cu - 5 Tube FEP/PTFE UL94 V0 6 Spring SUS - 7 UBV4 Clip PBT UL94 V0 8 Push Pull Clip PEI UL94 V0 9 Hard Push Pull Tab PC UL94 V0 0 Crimp Sleeve Sub-ssy L+PO - UBV4 Uniboot TPE UL94 V0 5/0

6 Version:. Document Number : SW-K Date(yyyy/mm/dd): Feature 3- Mechanical Characteristics Mechanical Characteristics are shown in Table 3 Table 3 Mechanical Characteristics Test item Conditions ppearance & function Vibration Impact Test Telcordia GR-36-CORE Telcordia GR-36-CORE Frequency:0 to 55 HZ mplitude:.5mm p-p Direction: x,y,z axis duration: hours/direction Height.5M own weight strike the concrete block repeat 8 times Mating durability JIS C times 3- Environmental Characteristics Environmental Characteristics are shown in Table 4 Table 4 Environmental Characteristics There should be no deformation,crack, loose and other damages with connector Products without cracks, deformation and breakage It can be joined without any mechanical abnormality Test item Conditions ppearance & function Dry heat H There should be no Cold Telcordia H deformation,crack, Temperature cycling test Gr-36-CORE -40 ~ +75 loose and other Humidity/Condensation Cycling Test -0 C~ + 65 C 90% - 00% RH 4 Cycles damages with connector Thermal Cycling Test Graph 6/0

7 Version:. Document Number : SW-K Date(yyyy/mm/dd): Reliability Test Pass environmental test results and mechanical test of LC optical fiber connectors respectively based on the Telcordia GR-36-CORE ll samples met or exceed all the Performance Criteria 3-3 Standard Reference Table 5 shows the standard type LC connector Table 5 standard reference Code No. Standard Number No Standard Content IEC Type LC Connector Family IEC TI/EI Optical Interface,.5 mm and.5 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-pc single mode fibres fiber Optic Connector Intermateability Standard-Type LC 4 Telcordia GR-36-CORE Issue 4 Generic Requirements for Singlemode Optical Connectors and Jumper ssemblies 4 Packing The product is packed to prevent the damage during the transportation 5 Identification Identification label should indicate the part number and lot number of the product and should be permanently attached to the packing bag 7/0

8 Version:. Document Number : SW-K Date(yyyy/mm/dd): Handling and care 6- Conditions of Storage Goods should not be long placed in the open air or have severely corrosive environment should be put in storage working temperature scope Keep the product in the packing bag at the follwing conditions for its storage Storage temperature:-40 to +85 Storage humidity:0 to +85 % RH non-condensing 6- Precautions of Use When products need long-distance transportation need wooden cases or cardboard boxes for packaging on the box indicating cannot energetically to throw collision pressure and shall not have the rain in order to avoid damage to the product 6-3 Disposal When discarding this product please follow the regulations of your own country 7 Drawing 8/0

9 F 8 7 FOCD Drawing F D d SM E D MM (6.5) Ø.49± ±0.05 ØD d (5.9) E D C 5.65± ± ±0. (47.95) (66) Note:.Mode & core.cable specifications 3.Body color 4.Ferrule type and ID 5.Concentricity 6.Boot color 7.Dust cap option 8.Shrink Tube option 9.Serial number C B Part Name LC UBV4 PUSH-PULL Connector Pre-ss'y Ver. V. B Drawing Code Part No. STCD-079 LC X HPP XX XX XXX XX XX X XX XX Issued Date pproved by Reviewed by Scale Free Unit mm Prepared by STS Change dd Size;Ver:V.0ŽV.; Zenghuimei New Drawing Zenghuimei No. Revised Date Reason Revised Content PIC / Liuxiaohui Rain.Chen 3 TECHNOLOGIES(SZ)CO.,LTD. Zenghuimei

10 F 8 FOCC Drawing 7 6 LCSHPP0BLF550WHSW00 LCMHPP0BGF6040WHSW00 5 LCSHPP30BLF550WHSTW00 LCMHPP30BGF6040WHSTW F ITEM IDENT No. DESCRIPTION NOTE QTY E 043 UBV4 Connector Body (SM) 043 UBV4 Connector Body (MM) UBV4 Clip LC UBV4 PUSH-PULLTab Crimp Sleeve Sub-ss'y for Uniboot.0mm 6 00 Crimp Sleeve Sub-ss'y for Uniboot 3.0mm UBV4 Uniboot QTY QTY QTY E D 7 D 5. 6 C B. 3 4 Part Name LC UBV4 PUSH-PULL Connector Pre-ss'y Drawing Code STCC-079 Part No. LC X HPP XX XX XXX XX XX X XX XX Issued Date pproved by Reviewed by Note:.Mode & core.cable specifications 3.Body color 4.Ferrule type and ID 5.Concentricity 6.Boot color 7.Dust cap option 8.Shrink Tube option 9.Serial number Ver. Scale Unit V.0 Free mm Prepared by C B New Drawing Zenghuimei No. Revised Date Reason Revised Content PIC / Rain.Chen Motofuji Liuxiaohui Zenghuimei TECHNOLOGIES(SZ)CO.,LTD. 3