SC Type Fiber Optic Connectors

Size: px

Start display at page:

Download "SC Type Fiber Optic Connectors"

Rose Blake
6 years ago
Views:

Type Fiber Optic Connectors H Series Attenuators POF / PCF Terminators Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with IEC 61754-4 and JIS C 573(F4).

1 Type Fiber Optic Connectors H Series Attenuators POF / PCF Terminators Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with IEC and JIS C 573(F4). intermate test by NTT certified connector. 2. Flame resistant Satisfies flammability rating UL4V-. 3. Three types of Duplex connector Available in following types; Flexible F type Floating mechanism and comply with ANSI standards. Rigid F type 12.7mm spacing between the fibers, low profile and compatibility with the flexible F-type. Rigid H type 8.5mm spacing between the fibers and for high density applications. 4. Simplified plugs and receptacles Small size (23.8 mm plug length). simplified plug is designed for equipments inside connection.comply with IEC

2 Product Specifications Ratings Operating temperature range -25 C to +7 C Storage temperature range -25 C to +7 C Optical Characteristics Mechanical Characteristics al Characteristics Item Test Method (IEC 613) Specifications Insertion Loss Return Loss Engagement and Separation force (SM) Wavelength 131nm (LD).5dB max. (PC, AdPC, APC) (GI) Wavelength 131nm (LED).3dB max. (PC) (SM) (GI) Ferrule withdrawal force Cable retention (Straight pull) Durability (cycles, mating/un-mating) Vibration Shock Humidity (Temperature/ humidity- cycles) Change of temperature Wavelength 131nm (LD) Measured with corresponding connector. Extract zirconia gauge 2.4 ±.5 mm dia from split sleeve. 8N tensile load for one minute. 1 times Dry heat 24 hours at 85 C Cold Frequency: 1 to 55 Hz, single amplitude of.75 mm, 2 hours in each of the 3 axis. Acceleration of 81 m/s 2, 6 ms duration, half sine shock pulse, 1 cycles in each of the 3 axis. -1 C to +65 C, humidity: % to 6% 1 cycles -4 C to +75 C 42 cycles (Complies with Telcordia standard GR-326-CORE) 24 hours at -25 C 22dB min. (PC) 4dB min. (AdPC) 6dB min. (APC) 22dB min. (PC) Simplex plug Duplex plug Engagement force: 1.6 N max. Separation force: 1.6 N max. Engagement force: 3 N max. Separation force: 3 N max. Copper alloy split sleeve 2N to 5.N Zirconia split sleeve 2N to 3.N 1) Insertion loss fluctuation after test:.2db max. 2) No visible damage, dislocation of clamp or cable. 1) Insertion loss fluctuation after test:.2db max. 2) No visible damage, cracks or part dislocation. Salt mist 48 hours in a 5% concentration of salt mist No significant corrosion. Materials Part Simplex plug housing Spring Ferrule Simplex adapter housing 4-position adapter housing 5-position adapter housing Receptacle housing Split sleeve Dust cap Material Synthetic resin Stainless steel Zirconia Synthetic resin or Zinc alloy Synthetic resin Synthetic resin Zinc alloy Zirconia or Phosphor Bronze Synthetic resin Attenuators Terminators POF / PCF 7

coupling/ decoupling type Simplex Duplex

adapters POF / PCF Receptacle - - - Note

3 Function diagram Plugs Ferrules Flat Pre-dome APC Plug housings Manual coupling/ decoupling type Simplex Duplex F-type Duplex Flexibility type Tool decoupling type Simplex Adapters Attenuators Manual coupling/ decoupling type Simplex Duplex F-type Duplex H-type Terminators Tool decoupling type 4-position 5-position * * Conversion adapters POF / PCF Receptacle Note *Please refer to the section HR. 8

4 Simplified plugs & receptacles Plugs Receptacles Manual coupling/ decoupling type Simplex Duplex H-type Duplex F-type Duplex F-type (built-in shutter only one port) Tool decoupling type 4-position 8-position Split sleeve Caps For plug For adapter Attenuators Terminators POF / PCF

1. Ferrules 1 It is not possible to connect it with a ferrule alone. Please use it with the plug housing. 2 The angle of the fiber entrance (cone) is 6 degrees or degrees.

5 1. Ferrules 1 It is not possible to connect it with a ferrule alone. Please use it with the plug housing. 2 The angle of the fiber entrance (cone) is 6 degrees or degrees. For PC, AdPC and UPC(Flat) Ø2.4±.5 ØA (Hole diameter) Attenuators Terminators POF / PCF Ø1 (Hole diameter) Ø4.6 Part Number CL No. A dimension Applicable Fiber cable H-F321-A125(1) H-F321-A1255(1) H-F321-A126(1) SM-.5/125 GI-5/125 For PC, AdPC and UPC(Pre-dome) Ø2.4±.5 R2 +.1 ØA (Hole diameter) Ø1(Hole diameter) Ø4.6 Part Number CL No. A dimension Applicable Fiber cable H-F3E2-A H-F3E2-A H-F3E2-A SM-.5/125 GI-5/125 For APC Ø2.4±.5 Ø1 (Hole diameter) ØA Ø1(Hole diameter) Ø4.6 Part Number CL No. A dimension Applicable Fiber cable H-F31-A125(4) H-F31-A1255(4) H-F31-A126(4) SM-.5/125 1

2. Plug Housings Please use them with the ferrule. Manual coupling / decoupling type Light weight type (For.mm fiber) 25 Strain relief type 33 7.4. Part Number CL No.

-E5(51) 74-314-5-51 Green Green APC 55 25 Short length type (For 2mm Cable) 7.4. Part Number CL No.

74-344-2-73 White ----- Crimp H-PH2-E5(68) 74-318-6-68 Green Green APC H-PH3-B1(68) 74-222-5-68 Blue PC H-PH3-B2(68) 74-223-8-68 Blue Light purple AdPC Ø3mm H-PH3-B6(62)

6 2. Plug Housings Please use them with the ferrule. Manual coupling / decoupling type Light weight type (For.mm fiber) 25 Strain relief type Part Number CL No. Boot color Slider color Polishing type H-PH.-E1(26) Blue PC Blue H-PH.-E2(51) Light purple AdPC H-PH.-E5(51) Green Green APC Short length type (For 2mm Cable) 7.4. Part Number CL No. Fiber cable type Slider color Boot color Polishing type Outer jacket fixing H-PH2-E1(64) Blue PC H-PH2-E2(75) Blue Light purple AdPC Ø2mm H-PH2-E6(73) White Crimp H-PH2-E5(68) Green Green APC H-PH3-B1(68) Blue PC H-PH3-B2(68) Blue Light purple AdPC Ø3mm H-PH3-B6(62) White Crimp H-PH3-B5(62) Green Green APC Part Number CL No. Slider color Boot color Polishing type Outer jacket fixing H-PH2-E1-A(62) Blue PC Blue H-PH2-E2-A(62) Light purple AdPC Glue H-PH2-E5-A(6) Green Green APC Attenuators Terminators POF / PCF 11

Duplex F-type 22.1 12.7 7.8 25 55 Part Number CL No.

Blue PC Ø3mm HF-2PH3-B2(P)(65) 74-236-1-65 Light purple AdPC Duplex Flexibility type (Comply with ANSI), for single Mode. 23 12.7 1 8. 14.1 36.7 61.5 Attenuators Part Number CL No.

7 Duplex F-type Part Number CL No. Applicable Fiber cable Guide key Slider color Boot Color Polishing type HF-2PH2-E1(P)(62) Blue PC Ø2mm HF-2PH2-E2(P)(62) Light purple AdPC P Blue HF-2PH3-B1(P)(63) Blue PC Ø3mm HF-2PH3-B2(P)(65) Light purple AdPC Duplex Flexibility type (Comply with ANSI), for single Mode Attenuators Part Number CL No. Applicable Fiber cable Slider color Boot Color Polishing type HM-2SPH2-B1(6) Simplex-2mm dia. cable or dual fiber zip cable Blue PC HM-2SPH3-B1(6) Simplex-3mm dia. cable or dual fiber zip cable Black HM-2SPH2-B2(6) Simplex-2mm dia. cable or dual fiber zip cable Light purple AdPC The pitch size between plugs is flexible. It is possible to connect it with duplex F-type adapter. Duplex Flexibility type (Comply with ANSI), for Multi-mode Terminators POF / PCF Part Number CL No. Applicable Fiber cable Slider color Boot Color Polishing type HM-2GPH2-B1(6) Simplex-2mm dia. cable or dual fiber zip cable HM-2GPH3-B1(6) Simplex-3mm dia. cable or dual fiber zip cable Black Blue PC The pitch size between plugs is flexible. It is possible to connect it with duplex F-type adapter. 12

Tool decoupling type Light weight type (For.mm fiber) Strain relief type 7.2 33 6 Part Number CL No. Boot Color Polishing type H2-PH.-E1(51) 74-421-1-51 Blue PC H2-PH.

8 Tool decoupling type Light weight type (For.mm fiber) Strain relief type Part Number CL No. Boot Color Polishing type H2-PH.-E1(51) Blue PC H2-PH.-E2(51) Light purple AdPC Part Number CL No. Fiber cable type Boot color Polishing type Outer jacket fixing H2-PH2-E1(6) Blue PC Ø2mm H2-PH2-E2(68) Light purple AdPC Glue H2-PH3-B1(63) Blue PC Ø3mm H2-PH3-B2(63) Light purple AdPC Crimp Attenuators Terminators POF / PCF 13

3.Adapters & Receptacles Manual coupling / decoupling type / Plastic Housing 27

4 3.4 +.5 -.5 13 18±.1 Ø2.3 Attenuators / Plastic Housing (Short flange) 27.4 3.4.5 14.8 13 18 22 H-A2(5) 74-2--5 Phosphor Bronze H-A2-D1(1) 74-258-2-1 Zirconia.5.5.5 Terminators 2-M2.4 or 2-Ø2.

9 3.Adapters & Receptacles Manual coupling / decoupling type / Plastic Housing Ø2.3 POF / PCF ± M2.4 or 2-Ø2.4 Panel thickness: 1.6mm Remarks H-A3(51) Phosphor Bronze PC,AdPC(Blue) H-A3-D1(2) Zirconia H-A3-D2(6) Zirconia APC(Green) / Die Cast Metal Housing ±.1 Ø2.3 Attenuators / Plastic Housing (Short flange) H-A2(5) Phosphor Bronze H-A2-D1(1) Zirconia Terminators 2-M2.4 or 2-Ø2.4 Panel thickness: 1.6mm Panel thickness: 1.6mm Snap in latch for panel mount H-AFR-D1(1) Zirconia without latch H-AFR-D2(1) Zirconia with latch Remarks PC,AdPC(Blue) Note: When applying excessive force to the plug or inserting in an odd angle, the adapter housing might be damaged. 14

8 Shutter-less side Shutter side Remarks H-AFL1-S1-D1 74-53-7- Zirconia PC,

10 / Plastic Housing (With shutter) Features With built-in automatic shutter Shutter-less side Shutter side Remarks H-AFL1-S1-D Zirconia PC, AdPC(Blue) H-AFL1-S1-D Zirconia APC(Green) Before mating After mating Movement of the shutter Attenuators Terminators POF / PCF 15

F type Snap-in and/or Screw Mounting Ø2.3 2-M2.4 or 2-Ø2.4 +.2 3 27.

PC, AdPC(Blue) HH-2A1-D2(P) 74-2137-- Zirconia APC(Green) Attenuators Terminators Remarks HH-2A(P)(51) 74-22-1-51 Phosphor Bronze PC, AdPC(Blue) HH-2A-D(P)(2) 74-262-1-2 Zirconia

11 F type Snap-in and/or Screw Mounting Ø2.3 2-M2.4 or 2-Ø Remarks HF-2A(P)(51) Phosphor Bronze PC, AdPC(Blue) HF-2A-D(P)(6) Zirconia HF-2A-D2(P)(6) APC(Green) Remarks HH-2A1(P)(51) Phosphor Bronze PC, AdPC(Blue) HH-2A1-D2(P) Zirconia APC(Green) Attenuators Terminators Remarks HH-2A(P)(51) Phosphor Bronze PC, AdPC(Blue) HH-2A-D(P)(2) Zirconia HH-2A-D2(P)(3) APC(Green) POF / PCF ±.1.4 Panel thickness: 1.6mm H type Snap-in (8.5) Panel thickness: 1.6mm H type Snap-in and/or Screw Mounting (8.5) Ø M2.4 or 2-Ø ±.1 Panel thickness: 1.6mm 16

Tool decoupling type 2/2 4-way adapter 24 3 2/2 5-way adapter(for Multi-mode fiber) 28.2 15 13 +.5.5 Panel thickness: 1.

5 PC,AdPC(Blue) Note: When applying excessive force to the plug or inserting in an odd angle, the zirconia

6mm Conversion adapters / Screw Mounting / Snap-in and/or Screw Mounting Remarks H2-5A(51) 74-25-4-51 Phosphor

sleeve within the adapter might be damaged. M8.75 M8.75 21.2 5.5 3.5 12.2 15.4 13.

1 Note: The type of plug that can be mated is manual coupling/decoupling type. Ø +.5.5 +.5.5 18±.

12 Tool decoupling type 2/2 4-way adapter /2 5-way adapter(for Multi-mode fiber) Panel thickness: 1.6mm Remarks H2-4A(51) Phosphor Bronze H2-4A-D1(1) Zirconia PC,AdPC(Blue) Note: When applying excessive force to the plug or inserting in an odd angle, the zirconia sleeve within the adapter might be damaged Panel thickness: 1.6mm Conversion adapters / Screw Mounting / Snap-in and/or Screw Mounting Remarks H2-5A(51) Phosphor Bronze PC,AdPC(Blue) Note: When applying excessive force to the plug or inserting in an odd angle, the zirconia sleeve within the adapter might be damaged. M8.75 M HJ-HRJ-B(43) Phosphor Bronze Ø2.3 Ø1 Ø 13.4±.1 Note: The type of plug that can be mated is manual coupling/decoupling type. Ø ±.1 Panel thickness: 1.6mm 2-M2.4 or 2-Ø2.4 2-M2.4 or 2-Ø Attenuators Terminators POF / PCF HJ-HRJ-C(43) Phosphor Bronze Note: The type of plug that can be mated is manual coupling/decoupling type. 17

13 Receptacles Ø2.3 Note: Designed for power meter sensors Part Number CL No. Remarks H-R1-B(41) For MM H-R2-B(41) For SM Note: The type of plug that can be mated is manual coupling/decoupling type. POF / PCF Terminators Attenuators Ø7 Ø3 Ø

14 4. Simplified plugs & receptacles Features 1.This product greatly reduced the number of parts compared with the connector, and achieved cost-saving. Simplified plug plug Simplified receptacle adapter 2.It achieved space-saving by using this product inside of the system. 3.Please use a special tool when you decouple the plug. Attenuators Terminators POF / PCF 1

15 Simplified plug Please use the special decoupling tool when you unmate the simplified plug. Simplified plug(flat) 5 Ø2.4 ØA(Hole diameter) (without boots) 5 Ø2.4 ØA(Hole diameter) POF / PCF 5 (with boots) Part Number CL No. A dimension Remarks H2-FK-A125(56) H2-FK-A1255(56) H2-FK-A126(56) without boots H2-FK-A125(51) H2-FK-A1255(51) H2-FK-A126(51) with boots Simplified plug(pre-dome) 5 Ø2.4 ØA(Hole diameter) R2 without boots Attenuators 5 5 Ø2.4 Terminators ØA(Hole diameter) R2 with boots Part Number CL No. A dimension Remarks H2-FK2-A125(56) H2-FK2-A1255(56) H2-FK2-A126(56) H2-FK2-A125(51) H2-FK2-A1255(51) without boots with boots H2-FK2-A126(51)

16 Simplified receptacle to Simplex / Shrouded Simplex / Unshrouded S R JAPAN Ø Ø2.3 S C H-SR-1(51) Phosphor Bronze H-SR-D1(2) Zirconia H-SR-1(3) None Note. The type of plug that can be mated is manual coupling/decoupling type H-SR-2(51) Phosphor Bronze H-SR-D2(6) Zirconia H-SR-2(3) None Note. The type of plug that can be mated is manual coupling/decoupling type M2.4 or 2-Ø M2.4 or 2-Ø ±.1 18± Duplex H type / Shrouded ( 8.5 ) Ø HH-2SR-1(R)(51) Phosphor Bronze HH-2SR-D1(R)(1) Zirconia Note. The type of plug that can be mated is manual coupling/decoupling type ±.1 Panel thickness: 1.6mm 2-M2.4 or 2-Ø Attenuators Terminators POF / PCF 21

17 H Series Type Fiber Optic Connectors Duplex F type / Unshrouded 2SR 2- Ø2.3 R M2.4 or 2- Ø POF / PCF ±.1 HF-2SR-2(P)(51) Phosphor Bronze HF-2SR-2(P)(3) None Note. The type of plug that can be mated is manual coupling/decoupling type. Duplex F type / Shrouded, built-in shutter type Ø Attenuators 4-Position / Shrouded 2-Ø M2.4 2-Ø ± Ø2.3 Terminators HF-2SR-S None 3.7±.1 π The type of plug that can be mated is manual coupling/decoupling type. Note. The shutter is built into only one of ports H2-4SR-1(51) Phosphor Bronze H2-4SR-D1(1) Zirconia H2-4SR-1(3) None Note: When applying excessive force to the plug or inserting in an odd angle, the zirconia sleeve within the adapter might be damaged. π The type of plug that can be mated is tool decoupling type. 22

8-Position / Shrouded 64.6 64.6 6.6 6.6 55.4 55.4 6 6 12.4 Ø2.3 12.4 Ø2.3 24.3 1.724.3 3 1.7 3 8SR 12.7 +.5 12.7 +.5 H2-8SR-D1(1) 74-27-8-1 Zirconia H2-8SR-1(3) 74-266--3 None 2-M2.4 or 2-Ø2.4 +.

18 8-Position / Shrouded Ø Ø SR H2-8SR-D1(1) Zirconia H2-8SR-1(3) None 2-M2.4 or 2-Ø M2.4 or 2-Ø Note: When applying excessive force to the plug or inserting in an odd angle, the zirconia sleeve within the adapter might be damaged. π The type of plug that can be mated is tool decoupling type. 8SR ±.1 6.6±.1 8-Position / Unshrouded Ø M2.4or 2-Ø ± Split sleeve Zirconia Copper alloy H2-8SR-2(51) Phosphor Bronze H2-8SR-D2(1) Zirconia H2-8SR-2(3) None Note: When applying excessive force to the plug or inserting in an odd angle, the zirconia sleeve within the adapter might be damaged. π The type of plug that can be mated is tool decoupling type H-SLIT-SLEEVE(51) Phosphor Bronze H-D Zirconia Attenuators Terminators POF / PCF 23

5. Caps For plug Ferrule cap 1.5 (Ø2.5) Press fit to plug frame inner type cap Ø5.5 4 Part Number CL No. H-C7(2) 74-42--2 π HRS standard cap for plugs. π Press fit to ferrule outer. 1 4-.15 Ø4.6 Ø6.

19 5. Caps For plug Ferrule cap 1.5 (Ø2.5) Press fit to plug frame inner type cap Ø5.5 4 Part Number CL No. H-C7(2) π HRS standard cap for plugs. π Press fit to ferrule outer Ø4.6 Ø6.5 Part Number CL No. H-C π Press fit to plug frame inner.the cap will not touch the outiside ferrule. Cap for plug housing 15.6 Part Number CL No. H-C Attenuators Terminators For adapter Simplex plastic cap π Press fit to outside of slider. Part Number CL No. H-C π HRS standard cap for adapters. π The cap is inserted in the lock part of the adapter POF / PCF 7.6 Part Number CL No. H-C π Press fit to adapter innner. 24

Simplex rubber cap Simplex plastic cap (.8) 17.8 (75) (12.

Remarks H-C3(4) 74-11--4 without cahin H-C2(4) 74-61-8-4 with cahin π

5 Duplex F-type plastic cap Part Number CL No.

22.1 8.3 Duplex H-type plastic cap 2 12.7 (75) Part Number CL No.

20 Simplex rubber cap Simplex plastic cap (.8) 17.8 (75) (12.6) Part Number CL No. Remarks H-C3(4) without cahin H-C2(4) with cahin π Press fit to adapter innner. 25 Ø5.5 Duplex F-type plastic cap Part Number CL No. H2-C π The cap is inserted in the lock part of the adapter Duplex H-type plastic cap (75) Part Number CL No. Remarks HF-C2(4) without cahin HF-C3(4) with cahin (75) Attenuators Terminators POF / PCF Part Number CL No. Remarks HH-C1(4) with cahin 25

6. Tools H2 Insertion/Extraction Tool Part Number CL No. Applicable Products H-T1-L 74-286-8- H2 Series <How to operate> Note. Handle with care because slim tips breaks easily. 1.

21 6. Tools H2 Insertion/Extraction Tool Part Number CL No. Applicable Products H-T1-L H2 Series <How to operate> Note. Handle with care because slim tips breaks easily. 1.Open the tip of tool by compressing levers as shown below. Terminators w 2.Insert the tool (with opening the tips) into adapter. q 3.Release the levers (then the tool catch H2 plug) and you can release the connector. Extraction tool for Simplified plug (without boots) 6 Attenuators POF / PCF Part Number CL No. Shape H-T Straight H-T L type 26

Extraction tool for Simplified plug (with boots) 7 2 3 5 2 Part Number

Shape H-T1 74-35-5- Straight H-T12 74-448-8- L type 6 5 6 Crimp Tool

Jacket crimping: Please select section"2mm".

22 Extraction tool for Simplified plug (with boots) Part Number CL No. Shape H-T Straight H-T L type Crimp Tool This is used in crimping of Kevlar or jacket at time of the plug (for cable diameter 2mm & 3mm) termination Part Number CL No. HT51/H-T2 CL Plug assemble tool (1) 2mm Jacket crimping: Please select section"2mm". 3mm Jacket crimping: Please select section"3mm". (2) Kevlar TM crimping: Please select section center round groove. Attenuators Terminators POF / PCF Part Number CL No. H2-PH2/CVMD

23 Patch cords Various patch cords Attenuators Terminators Patch cords Single mode, Polishing type:adpc (Advanced PC) Connector Cable Dia. Polishing type Length Part Number CL No. 1m H-ASPK2-F3L-1M(61) Ø. 2m H-ASPK2-F3L-2M(62) m H-ASPK2-F3L-3M(63) m H-ASPAD2-F3Q-1M(21) Ø2. 2m H-ASPAD2-F3Q-2M(22) m H-ASPAD2-F3Q-3M(23) m HR-ASPA2-F3L-1M(1) Ø. 2m HR-ASPA2-F3L-2M(2) AdPC 3m HR-ASPA2-F3L-3M(3) m HR-ASP72-F3Q-1M(41) Ø2. 2m HR-ASP72-F3Q-2M(42) m HR-ASP72-F3Q-3M(43) m HA-ASPH2-F3L-1M(61) Ø. 2m HA-ASPH2-F3L-2M(62) m HA-ASPH2-F3L-3M(63) m HA-ASP2-F3Q-1M(7) Ø2. 2m HA-ASP2-F3Q-2M(71) m HA-ASP2-F3Q-3M(72) Single mode, Polishing type:apc (Angled PC) Connector Cable Dia. Polishing type Length Part Number CL No. 1m H-CSPE2-F3Q-1M(21) Ø2. APC 2m H-CSPE2-F3Q-2M(22) m H-CSPE2-F3Q-3M(23) Multi mode, Polishing type:pc Connector Cable Dia. Polishing type Length Part Number CL No. 1m H-SPK2-F3M7-1M(1) Ø. 2m H-SPK2-F3M7-2M(2) m H-SPK2-F3M7-3M(3) m H-SPAD2-F3P-1M(1) Ø2. PC 2m H-SPAD2-F3P-2M(2) m H-SPAD2-F3P-3M(3) m HR-SP72-F3P-1M(51) Ø2. 2m HR-SP72-F3P-2M(52) m HR-SP72-F3P-3M(53) Please contact HIROSE for other specifications. POF / PCF 28

24 Patch cords Various patch cords Patch cord structure - - L +1 % - Please refer to each connector's page for, or type Connector's detail. Other type patch cords Please select connector and cord specification from Table, and contact HIROSE. Parts Item Specified example Side A connector Connector type,,, LC, Simplified, Simplified Polishing type AdPC, APC, PC Side B connector Connector type,,, LC, Simplified, Simplified, None(pigtail) Polishing type AdPC, APC, PC Cord style Simplex, Duplex zipcord Optical Fiber Cord Fiber mode SM-.5/125, MM-5/125 Cord diameter Ø.(Tight buffered), Ø2, Ø3 Length Unit: m Please contact HIROSE for other specifications. Attenuators Terminators POF / PCF 2

SC Type Fiber Optic Connectors

SC Type Fiber Optic Connectors SC HSC Series FC Jan.1.2018 Attenuators Copyright 2018 HIROSE Environment ELECTRIC CO., LTD. MU All Rights Reserved. Features 1. IEC, JIS standard compliant and intermateability