MU Type Fiber Optic Connectors

Size: px

Start display at page:

Download "MU Type Fiber Optic Connectors"

August Holland
6 years ago
Views:

Type Fiber Optic Connectors Features H Series Back panel side. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC 64-6.

1 Type Fiber Optic Connectors Features H Series Back panel side. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC intermate test by NTT certified connector. Package side SC FC. Flame resistant Satisfies flammability rating UL94V-. Backplane Backplane connector has a self-holding mechanism which does not transfer any force on the back panel when both side of connector assemblies are fully connected. Back panel side connectors can be removed or inserted even both sides are mated. 4. Wide Variety of adapter type Type. Simplified plugs and Receptacles Extremely small size (only.mm Plug length). simplified plug is designed for equipments inside connection. Applications Number of Fiber connections Single Duplex 4 way 8 way 6 way Board Mounting K K --- K --- Snap-in Panel Mounting & Screw Panel Mounting K K K K K Optical terminal equipment, optical relay racks, test equipment, telecommunication equipment and other systems requiring Small Form Factor optical connections. Attenuators Terminators Please contact us if you have any requests. Hirose will offer excellent solutions to meet your requirements.

2 Product Specifications Ratings Operating temperature range - C to + C Storage temperature range - C to + C Optical Characteristics Item Test Method (IEC 6/JIS C 96) Specifications SM Wavelength nm (LD).dB max. (AdPC) Insertion Loss MM(GI) Wavelength nm (LED).dB max. (AdPC) SM Return Loss Wavelength nm (LD) 4dB min. (AdPC) MM(GI) SC FC Mechanical Characteristics al Characteristics Engagement and Separation forces Ferrule with drawal force Cable retention (Straight pull) Durability (cycles, mating/unmating) Measured with corresponding connector. Extract zirconia gauge.49 ±. mm diameter Copper alloy split sleeve N to N from split sleeve. Zirconia split sleeve N to.n N tensile loads for one minute. times (Backplane) times (Plug) Simplex plug Engagement force: N max. Separation force: N max. Duplex plug Engagement force: N max. Separation force: N max. ) Insertion loss fluctuation after test:.db max. ) No visible damage, dislocation of clamp or cable. Vibration Frequency: to Hz, single amplitude of. mm, hours in each of the axis. Acceleration of 98 m/s, 6 ms duration, Shock ) Insertion loss fluctuation after test:.db max. sin half-wave waveform, cycles in each of the axis. ) No visible damage, cracks or part dislocation. Humidity - C to 6 C, humidity: 9% to 96% (Temperature/ humidity- cycles) cycles Change of Temprature - C to + C cycles Dry heat 96 hours at 8 C Cold 96 hours at - C Salt mist 48 hours in a % concentration of salt mist No significant corrosion. Attenuators Terminators Materials Part Simplex plug housing Spring Ferrule Simplex adapter housing Adapter metal fittings Simplified receptacle housing Simplified plug Backplane connector housing Split sleeve Dust cap Material Synthetic resin Steel Zirconia Synthetic resin Stainless steel or copper alloy (Nickel plating) Synthetic resin Zirconia Synthetic resin Zirconia or copper alloy Synthetic resin 6

3 Function diagram Duplex plug HA-P-H or HA-P-H and HA-F-A** Dust cap HB-DP- Terminator HA-TM-P Simplex plug HA-P-H or HA-P-H and HA-F-A** Back panel Thickness:.4mm or.mm 8-position Backpanel side HB-L8HA- or HB-L8HB- Gold plate side 8-position package side HB-L8PA- SC FC Package Duplex backpanel side HB-LHA- or HB-LHB- Sleeve holder Dust cap Duplex package side Simplex J plug HB-SH- HB-DJ- HB-LPA- HAJ-P-H or HAJ-P-H and HA-F-A** Terminator HAJ-TM-P Attenuators Terminators

Plug Housings Simplex Plug Housing for mm cable.9 4. 6.6.6.6 48. Part Number CL No.

Boot color HA-P.9-H() -8-- Blue HA-P.9-H() -9-- Light purple Duplex Plug Housing for mm cable 8.8 8.4 4. 6.6.6.6 48. Part Number CL No.

Boot color HA-P.9-H() -6-- Blue HA-P.9-H() -6-- Light purple Terminators Simplex Plug Housing for.mm Cable.9 4. 6.6.6. 4 Part Number CL No.

4 Plug Housings Simplex Plug Housing for mm cable Part Number CL No. Boot color HA-P-H() Blue HA-P-H() --8- Light purple SC Simplex Plug Housing for.9mm fiber FC Part Number CL No. Boot color HA-P.9-H() -8-- Blue HA-P.9-H() -9-- Light purple Duplex Plug Housing for mm cable Part Number CL No. Boot color HA-P-H() Blue HA-P-H() --- Light purple Duplex Plug Housing for.9mm fiber Attenuators Part Number CL No. Boot color HA-P.9-H() -6-- Blue HA-P.9-H() -6-- Light purple Terminators Simplex Plug Housing for.mm Cable Part Number CL No. Boot color HA-P.-H --9 Light purple Note: Ferrules, HA-FA-A*() should be needed for this plug. (see page 9) Certain assemble tools are also needed. Please contact sales representative for the details. 8

5 Ferrules For plugs For HA-P. -H* plug.6.6 Ø. Part Number CL No. A dimension Applicable Fiber cable HA-F-A() HA-F-A() ---. SM,MM HA-F-A6() Ø. Ø.49±. Ø.49±. (Hole diameter) ØA ØA (Hole diameter) (Hole diameter) Ø.6 Ø. (Hole diameter) Ø Ø.8 Ø.8 SC FC Part Number CL No. A dimension Applicable Fiber cable HA-FA-A() HA-FA-A() SM,MM HA-FA-A6() Attenuators Terminators 9

Adapters Simplex Adapter / Snap-in Panel Mounting -A.4.6 +. 6.. +. SC Panel thickness:.6mm.8 HA-A- --8 Zirconia FC Simplex Adapter / Screw Panel Mounting -AS 6.4... - Ø.4. +..±..6 +. - Ø.4 +.

6 Adapters Simplex Adapter / Snap-in Panel Mounting -A SC Panel thickness:.6mm.8 HA-A- --8 Zirconia FC Simplex Adapter / Screw Panel Mounting -AS Ø ± Ø.4 +. or -M.4 HA-AS- -4- Zirconia Attenuators Simplex Adapter / Board Mounting BBoard Mounting Pattern -A -A 9..4.±. 4-Ø.4±. Terminators ±. Board thickness:.6mm. HA-AH- -- Zirconia

Duplex adapter / Snap-in Panel Mounting 4.mm Type 4.

8 4 HA-A-4-8-8 Zirconia 4. 4. +.. +. Panel thickness:.6mm SC FC 6.

HA-AK- -96-9 Zirconia Note:The outer dimension is the same as the

±. ±.. +. HA-AS-4-88- Zirconia - Ø.4 +. or -M.

7 Duplex adapter / Snap-in Panel Mounting 4.mm Type 4. Duplex Adapter / Snap-in Panel Mounting 6.mm Type -A HA-A Zirconia Panel thickness:.6mm SC FC 6. Refer to page for details of the Attenuators. HA-AK Zirconia Note:The outer dimension is the same as the above "HA-A-4". Duplex Adapter / Screw Panel Mounting ±. ±.. +. HA-AS Zirconia - Ø.4 +. or -M.4 Duplex Adapter / Board Mounting BBoard Mounting Pattern. ±.. ±. 4- Ø.4 ±. Board thickness:.6mm HA-AH Zirconia Attenuators Terminators

8 Position Adapter / Snap-in Panel Mounting FC.8 6-8A SC 4 4. Panel thickness:.6mm HA-8A Zirconia 8-Position Adapter / Screw Panel Mounting 6-8AS ±. -Ø.4 4 ± Ø.4 +. or -M.4 HA-8AS- --9 Zirconia Attenuators 8-Position Adapter / Board Mounting -8A 6. BBoard Mounting Pattern 9 4.6±. Terminators ±. 4-Ø.4±. Board thickness:.6mm HA-8AH- -6- Zirconia

Cost effective adapters 8-Position Adapter / Screw Panel Mounting 6.8.. +.. 46. 4. 4.6 +. 46.±. 4. -Ø.4 +. or -M.4 -Ø. SC FC 6-Position Adapter / Screw Panel Mounting 9 86 8

9 Cost effective adapters 8-Position Adapter / Screw Panel Mounting ±. 4. -Ø.4 +. or -M.4 -Ø. SC FC 6-Position Adapter / Screw Panel Mounting D B D B F 9 F 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Panel thickness:.6mm HA-8A- -- Zirconia HA-8A-B -9-8 Copper alloy -Ø A Ø.4 +. or -M ± Attenuators Terminators Panel thickness:.6mm HA-6A- -4- Zirconia HA-6A-B -- Copper alloy

Angled Adapters Duplex Angled Adapter with Shutter / Snap-in Panel Mounting. +. SC..6 6.4 (4 )..8 (t=.mm)..4 Panel.8 +..6. Duplex Angled Adapter / Snap-in Panel Mounting Mounting Angle HA-A-4-4-S -94- Zirconia 4.

4 8(4 position ) 6.4 (Duplex+4 position ). (4 position ) 9. 4(Duplex+4 position ) 6. 6(4 position 4). 8(Duplex+4 position 4) 6. (4 position ). +.. +. Panel thickness:.mm 4

10 Angled Adapters Duplex Angled Adapter with Shutter / Snap-in Panel Mounting. +. SC (4 )..8 (t=.mm)..4 Panel Duplex Angled Adapter / Snap-in Panel Mounting Mounting Angle HA-A-4-4-S -94- Zirconia FC (4 ) Panel thickness:.mm 4-Position Angled Adapter / Snap-in Panel Mounting Mounting Angle HA-A Zirconia (4 ) Attenuators Panel thickness:.mm Terminators Mounting Angle HA-4A Zirconia 4 Panel Cutout dimensions Fiber Position Panel cutout:xmm 6(Duplex+4 position) 4.4 8(4 position ) 6.4 (Duplex+4 position ). (4 position ) 9. 4(Duplex+4 position ) 6. 6(4 position 4). 8(Duplex+4 position 4) 6. (4 position ) Panel thickness:.mm 4

Enhanced Shielding Adapter Duplex shielding Adapter / Screw Panel Mounting -Ø.4 8 -. 4 - HA-AS-6-9-9 Zirconia C 6 Split sleeve Hole(Ø) 8±. +.. +. +. -Ø.4 or M.

... Shielded Adapter HA-AS-6 Conventional Adapter HA-A-4 Pre Amplifier Spectrum Analizer DATA PC DATA Signal generator Panel. 8. 8. 9. 9......... 4. 4... 6.

11 Enhanced Shielding Adapter Duplex shielding Adapter / Screw Panel Mounting -Ø HA-AS Zirconia C 6 Split sleeve Hole(Ø) 8± Ø.4 or M.4 Recommended Panel Cutout(:) Housing Metal shell SC FC BShielding Effectiveness Example Shielding effectiveness comparison(8~6.ghz) Electric-field strength(dbµv/m) Shielded Adapter HA-AS-6 Conventional Adapter HA-A-4 Pre Amplifier Spectrum Analizer DATA PC DATA Signal generator Panel Frequency(GHz) Antenna Adapters pcs Shielded box Antenna 4 4 Conventional type. +. Panel cutout Shielded type. +. M.4 Attenuators Terminators Source ±. +. RF connector RF cable Source Fig. Measurement system Fig. Shielded box

Backpanel side Connector Housings Duplex Backpanel side Connector Housing 4-R.8 max..89±. 8.9 +..±..8.4 4. 8.9 (-R) LHA. 6.. 8.9±..±. 8.±. (-R) SC Part Number CL No.

nm 8-Position Backpanel side Connector Housing FC Sleeve Holder 8 6 4. Note: Screw fastening torque:.nm 8 Attenuators. Ø...94 4. L8AH 6.

9 Terminators Gold plated section HB-SH- -- Zirconia Note: This Sleeve Holder should be used for duplex and 8-position package side

12 Backpanel side Connector Housings Duplex Backpanel side Connector Housing 4-R.8 max..89± ± (-R) LHA ±..±. 8.±. (-R) SC Part Number CL No. Panel thickness HB-LHA mm HB-LHB- -8-.mm Note: Screw fastening torque:.nm 8-Position Backpanel side Connector Housing FC Sleeve Holder Note: Screw fastening torque:.nm 8 Attenuators. Ø L8AH 6.. Part Number CL No. Panel thickness HB-L8HA mm HB-L8HB- --.mm 4. 8-R.8 max ± (4-R).94 ± Ø.9 Terminators Gold plated section HB-SH- -- Zirconia Note: This Sleeve Holder should be used for duplex and 8-position package side connector housing and J Plug Housing connector plug. Insert the Sleeve Holder using dedicated tool #HB-TS-. The gold plated section of the Sleeve Holder should be inserted into the package side connector housing. 6

8±. 8.6±. Part Number CL No. HB-L8PA- -6- Note : Screw fastening torque :.Nm 9. 4.9 L8PA 4 pieces attached 4 pieces attached..8 M.4 M.4 9.±. Ø. ±.

13 Package side Connector Housings Duplex Package side Connector Housing Part Number CL No. HB-LPA- -- Note : Screw fastening torque :.Nm.8 8-Position Package side Connector Housing LPA Ø. ±.. ±. 4 pieces attached 4 pieces attached M.4 M.4.8 ±. 8.6 ±. Ø. ±. SC FC 6.4 Ø.± BBoard Mounting Pattern BBoard Mounting Pattern.8±. 8.6±. Part Number CL No. HB-L8PA- -6- Note : Screw fastening torque :.Nm L8PA 4 pieces attached 4 pieces attached..8 M.4 M.4 9.±. Ø. ±. J Plug Housing Simplex J Plug Housing for.9mm fiber Attenuators Terminators Part Number CL No. Boot color HAJ-P.9-H() -6-- Blue HAJ-P.9-H() Light purple

14 Simplified Receptacles & Plug Features Terminators Attenuators FC SC Space saving Installation image () () Split sleeve Simplified plug 8

Simplified Receptacles Simplex Simplified Receptacle / Screw Panel Mounting HA-SR- -94-9 Zirconia M U S R..8. The product information in this catalog is for reference only.

15 Simplified Receptacles Simplex Simplified Receptacle / Screw Panel Mounting HA-SR Zirconia M U S R..8. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HA-SR-B -8-4 Copper alloy 8-position Simplified Receptacle / Screw Panel Mounting Ø Ø.4. ± Ø.4 +. or -M Ø.4 +. or -M SC FC 8SR ±. 8. HA-8SR- I -- Zirconia HA-8SR-B -46- Copper alloy -position Simplified Receptacle / Screw Panel Mounting Ø. -Ø.4 +. or M ±. t=.6 Attenuators Terminators HA-SR-4 I -9- Zirconia HA-SR-B4 -- Copper alloy 9

F F D D 8-position Simplified Receptacle - for extremely

density applications 4. 6. 8.4 8. 8.8 8.. 9.

16 F F D D 8-position Simplified Receptacle - for extremely high density applications SC FC. 9 B B HA-8SR- I -68- Zirconia HA-8SR-B -- Copper alloy 6-Position Simplified Receptacle - for extremely high density applications HA-6SR- -- Zirconia HA-6SR-B -- Copper alloy Attenuators BMounting Example Terminators a

Simplified Plug Simplex simplified Plug for.9mm fiber Split Sleeve Ø.49±. +. ØA (Hole diameter). +.. Part Number CL No. A dimension Ferrule Applicable Fiber cable HA-FK-A(4) -99--4. HA-FK-A(4) --9-4.

17 Simplified Plug Simplex simplified Plug for.9mm fiber Split Sleeve Ø.49±. +. ØA (Hole diameter). +.. Part Number CL No. A dimension Ferrule Applicable Fiber cable HA-FK-A(4) HA-FK-A(4) Zirconia SM, MM HA-FK-A6(4) SC FC HA-D() -4-- Zirconia HA-SLIT-SLEEVE() --- Copper alloy Extraction Tool for Simplified Plug Part Number CL No. HA-FK-T Attenuators Terminators

Dust Caps Dust Cap for Backpanel side connector housings 4..9 SC Part Number CL No. Applicable connector HB-DP- --4 Back panel side housing FC Part Number CL No.

18 Dust Caps Dust Cap for Backpanel side connector housings 4..9 SC Part Number CL No. Applicable connector HB-DP- --4 Back panel side housing FC Part Number CL No. Applicable connector housing HB-LPA- HB-DJ- -6- HB-L8PA- Terminators Attenuators Dust Cap for Package side connector housings Ø. Ø4.4 DJ Ø6 4.6 Dust Cap for Adapters Part Number CL No. Applicable connector HA-DP- -- Adapter, simplified receptacle

19 Tools Insertion / Extraction Tool for Plug Insertion / Extraction Tool for Plug Cost effective type Part Number CL No. Color of Tip Remarks HA-TP- -4- Blue For Conventional Adapters HB-TP- --4 Brown For Backplane system SC FC Part Number CL No. H/HEMD-P - Extraction Tool for J Plug Insertion / Extraction Tool for Sleeve Holder Part Number CL No. HB-TJ- -6- Attenuators Terminators Part Number CL No. HB-TS- --

Applicable plug housing HA-P-H,H HT4/HA-P-H 9-64-4

20 Crimp Tools SC Terminators Attenuators FC Stop Ring Insertion Tool Part Number CL No. Applicable plug housing HA-P-H,H HT4/HA-P-H HA-P-H,H Part Number CL No. Applicable connector HA.J/PR-MD plug housings except HA-P.-H 4

MU Type Fiber Optic Connectors

MU Type Fiber Optic Connectors HMU Series Back panel side Package side Features. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and