FC Type Fiber Optic Connectors
|
|
- Muriel Neal
- 6 years ago
- Views:
Transcription
1 FC Type Fiber Optic Connectors HRFC Series MU SC FC Features 1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products. JIC C 597 (F1 type fiber optic connectors). IEC Two types of plug frames Conventional cutout key ring types and molded key ring types are available. Important Notice Plug key width : 2.1mm Adapter key width : 2.2mm Applications Public communications lines, CATV, Test equipment, etc. Attenuators Terminators 47
2 Product Specifications Ratings Operating temperature range -25 C to +7 C Storage temperature range -25 C to +7 C MU SC FC Optical Characteristics Attenuators Terminators Mechanical Characteristics al Characteristics Item Test Method (IEC 613) Specifications Insertion Loss (SM) Wavelength 131nm (LD).5dB max. (PC, AdPC, APC) (GI) Wavelength 131nm (LED).3dB max. (PC) Return Loss (SM) 22dB min.(pc) 4dB min.(adpc) 6dB min. (APC) Wavelength 131nm (LD) (GI) 22dB min. (PC) Ferrule withdrawal Extract Zirconia gauge ±.5 mm Copper alloy split sleeve 2N to 5.9N dia from split sleeve. Zirconia split sleeve 2N to 3.9N Cable retention (Straight pull) 98N tensile load for minute. 1) Insertion loss fluctuation after test:.2db max. 2) No visible damage, dislocation of clamp or cable. Durability (cycles, mating/un-mating) 1 times Vibration Shock Frequency: 1 to 55 Hz, single amplitude of.75 mm, 2 hours in each of the 3 axis. Acceleration of 981 m/s 2, 6 ms duration, sin half-wave waveform, 1 cycles in each of the 3 axis. 1) Insertion loss fluctuation after test:.2db max. Humidity 2) No visible damage, cracks or part dislocation. -1 C to 65 C, humidity: 9% to 96% 2 cycles (Temperature/ humidity- cycles) Change of temperature -4 C to +7 C 42 cycles (Complies with Telcordia standard GR-326-CORE) Dry heat 96 hours at 85 C Cold 96 hours at -25 C Salt mist 48 hours in a 5% concentration of salt mist No significant corrosion. Materials Part Plug housing Spring Ferrule Adapter Split sleeve Receptacle Attenuator housing Material Brass, Stainless steel or Zinc alloy Stainless steel Zirconia Brass Copper alloy Brass Stainless steel 48
3 FC products Plug Housing Key width 2.1mm Ferrule Adapter Key width 2.2mm For 2 mm cable, Molded keying ring type For 3 mm cable, Molded keying ring type For.9 mm fiber, Molded keying ring type Standard type Cutout keying ring type Cutout keying ring type Cutout keying ring type Single mode Multi mode Solid Body type MU SC FC HRFC-type Connector Round type Flange type Conversion adapter FC to SC FC to SC Receptacle Dust cap Attenuator Fixed type Single mode GI Variable type Single mode Attenuators Terminators Terminator 49
4 Molded keying ring type (Key width 2.1mm) For 2mm cable 52.8 MU Ø1 Part Number CL No. Boot color Polishing type HRFC-P8-H2(21) Blue PC HRFC-P8-L2(21) Light purple AdPC HRFC-P8-G2(21) Green APC SC For 3mm cable 52.8 FC Ø1 Part Number CL No. Boot color Polishing type HRFC-P8-H3(21) Blue PC HRFC-P8-L3(21) Light purple AdPC HRFC-P8-G3(21) Green APC For.9mm fiber 3.8 Ø1 Attenuators Tool Crimp tool Part Number CL No. Boot color Polishing type HRFC-P-H(21) Blue PC HRFC-P-L(21) Light purple AdPC HRFC-P-G(21) Green APC Part Number CL No. Applicable connector HSC-T HRFC-P8-H2,L2,G2, HRFC-P8-H3,L3,G3, Terminators <Locations> (1)2mm Jacket crimping: section A 3mm Jacket crimping: section C (2)Kevlar TM crimping: section B 5
5 Cutout keying ring type (Key width 2.1mm) For 2mm cable For 3mm cable Ø1 Part Number CL No. HRFC-P1-H(4) Ø MU SC FC Part Number CLNo. HRFC-P1-H For.9mm fiber Ø Part Number CL No. HRFC-P6-H Attenuators Terminators 51
6 MU The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Adapters (Key width 2.2mm) Solid Body type 4 FC-A Ø M2.4 or 2-Ø SC FC Standard Body type Part Number CL No. Split sleeve Remarks HRFC-PA11-G Copper alloy HRFC-PA11-D Zirconia (Note) Ø2.2 Ø4 Countersink depth 1.5 FC-A 9.5 Ø ±.1 Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. Board thiekness : 16mm 2--M2.4 or 2--Ø Flange type 2-- Ø2.2 Ø4 Countersink depth 1.5 Part Number CL No Mark Split sleeve Remarks HRFC-PA1-G1(2) FC-AP Copper alloy 13.4±.1 HRFC-PA1-D1(2) FC-AA Zirconia (Note) Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 2 Ø19 Ø M2.4 or 2--Ø Attenuators Round type Part Number CL No. Split sleeve Remarks HRFC-PA4-G Copper alloy 13.4±.1 HRFC-PA4-D Zirconia (Note) Terminators Board thiekness : 16mm 2_ 2- Ø Ø4 Countersink depth 1.5 Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. Ø8 Part Number CL No. Split sleeve Remarks HRFC-A2-SF(1) Copper alloy HRFC-A2-SF-D Zirconia (Note) Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 52
7 Conversion adapters FC / SC FC / SC (3.9) Ø19 Ø ±.1 Part Number CL No. Split sleeve HSCJ-HRFCJ-B(51) Copper alloy 32 Part Number CL No. Split sleeve Polishing type Fiber type HRFCP-HSCJ-1(51) HRFCP-HSCJ-1AS(51) HRFCP-HSCJ-2(51) HRFCP-HSCJ-2AS(51) Copper alloy 7.4 Ø19 PC AdPC PC AdPC 2--M2.4 or 2--Ø Board thiekness : 16mm GI-5/125 SM-9.5/125 MU SC FC FC / SC ( 1.8) Receptacle Part Number CL No. Split sleeve Polishing type Fiber type HSCP-HRFCJ-1(51) HSCP-HRFCJ-1AS(51) HSCP-HRFCJ-2(51) HSCP-HRFCJ-2AS(51) M FC-R M Copper alloy PC AdPC PC AdPC Ø9 +.5 GI-5/125 SM-9.5/ M2.4 or 4--Ø Attenuators Terminators 4-Ø2.2 Ø4 Countersink depth ±.1 Part Number HRS No. Remarks HRFC-R MM HRFC-R SM 53
8 Ferrule Same as SC ferrules Refer to page 33 for details. MU Dust Cap Terminators Attenuators FC SC Part Number CL No. HRFC-C
FC Type Fiber Optic Connectors
Type Fiber Optic Connectors HR Series Features 1. JIS, IEC standard compliant and intermateability test certified. Comply with IEC 61754-13 and JIS C 5970(type F01). intermate test by NTT certified connector.
More informationSC Type Fiber Optic Connectors
SC Type Fiber Optic Connectors HSC Series MU SC FC Features 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. JIS C 573 (F04 type fiber optic connectors) IEC 61754-4 2. Plugs
More informationSC Type Fiber Optic Connectors
SC Type Fiber Optic Connectors SC HSC Series FC Jan.1.2018 Attenuators Copyright 2018 HIROSE Environment ELECTRIC CO., LTD. MU All Rights Reserved. Features 1. IEC, JIS standard compliant and intermateability
More informationMU Type Fiber Optic Connectors
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MU Type Fiber Optic Connectors HMU Series Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with
More informationMU Type Fiber Optic Connectors
Type Fiber Optic Connectors Features H Series Back panel side. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC 64-6. intermate
More informationMU Type Fiber Optic Connectors
MU Type Fiber Optic Connectors HMU Series Back panel side Package side Features. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and
More informationSC Type Fiber Optic Connectors
Type Fiber Optic Connectors H Series Attenuators POF / PCF Terminators Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with IEC 61754-4 and JIS C 573(F4). intermate
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS F-3 Simplex PC/APC MULTIMODE PC Telecommunications and Fiber Optics are developing at an incredible speed. To keep up with tomorrow s requirements
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2000 Simplex PC/APC MULTIMODE PC Constant innovation in the field of fiber optics has created demand for products with ever increasing performance
More informationSPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss
12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their
More informationLEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in
More informationConnector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm
24 LC-UPC Unibody BTW Boot 2.0mm Round Connector Insertion Loss 0.08dB typical UPC 0.10dB typical APC 0.15dB typical 0.04dB typical Super Low Loss 55dB typical UPC 65dB typical APC Durability < 0.2dB typical
More informationDIAMOND Fiber Optic Components
DIAMOND Optic Components NETWORK ACCESSORIES Attenuators Family PC/APC MULTIMODE PC DESCRIPTION Attenuators are used to adapt the transmitted light power to the characteristics of the implanted receiver.
More informationSinglemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue
One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter
More informationAEROSPACE, DEFENSE & MARINE /// MC801 FIBER OPTIC CONNECTORS
MC801 FIBER OPTIC CONNECTORS RUGGED, RELIABLE CONNECTIVITY COMBINING HIGH-PERFORMANCE ARINC 801 TERMINI WITH THE VERSATILITY AND FAMILIARITY OF D38999 SERIES III STYLE CONNECTORS MC801 FIBER OPTIC CONNECTORS
More informationEC Series LC Connectors
EC Series LC Connectors Amphenol s data communications EC Series fiber optic LC small form factor (SFF) connectors utilize the familiar RJ-45 latching mechanism. The LC connector is almost half the size
More information3 No Polish LC 50um Multimode Connector Environmental and Mechanical Test Report
January 009 No Polish LC 0um Multimode Connector Environmental and Mechanical Test Report Page Introduction The focus of this document is to report the results from a series of environmental and mechanical
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2 Backplane PC/APC MULTIMODE PC Enthusiastic customers using the E-2 TM connector system on their equipment encouraged the development of
More information0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
More informationSMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
More informationLC Connectors. Fiber Optic Products Catalog. One-Piece LC Connector Product Facts
44 One-Piece LC Connector Singlemode Telecordia GR-326 tested (Report #50-652) Multimode TIA/EIA 568-B.3 tested Singlemode and Multimode are compatible with both anaerobic adhesives and heat cure epoxy
More informationF-LINK INTER-CONNECT. Overview. Background. F-LINK Inter-Connect Solution
F-LINK Inter-Connect Solution PRELIMINARY Overview Optical Cable Corporation (OCC ) introduces the F-LINK Inter-Connect platform, which is simply the most remarkable connector system ever conceived. Born
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More informationFiber optic connector for space applications
Fiber optic connector for space applications The AVIM connector family, is designed to be used in high reliability space and aerospace programs. These connectors are designed as Single Terminus, Fiber
More informationSSC-PE Series Single mode SC CONNECTOR PLUG
DOCUMENT NUMBER S05-H048-02E Single mode SC CONNECTOR PLUG TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationModular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission
More informationMini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
More informationModular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
More informationMechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
More informationLX.5 (SFOC 1.25) High packing density. High performance. High reliability. High safety. High flexibility
Today, packing density is more important than ever. The LX.5- connector, based on the proven 1.25 mm ferrule technology, is the only standardized small form factor connector combining high packing density,
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationProduct Catalogue. Fibre Optic Components
Product Catalogue Fibre Optic Components version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients
More information1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationModular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
More informationFTTH SOLUTION. Content. Contral. Apartment. house. house 13P. 11P Adapter 11P 10P 11P 13P 13P. 10P Mechanical Splice 11P 10P 11P 14P 10P.
FTTH SOLUTION OLT 9P Contral Office V-ONT FDF 10P 6P Sleeve PLC Splitter Apartment ONT 2.5G SFT 8P Patchcord V-ONT Optical hub 12P Cross Tap Fiber Closure 11P Field Installable 13P Connector Plier house
More information1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationInterface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationINTERCONNECT CATALOGUE EDITION 2.1
INTERCONNECT CATALOGUE EDITION 2.1 STANDARD CONNECTOR SERIES pg. 02 SMALL FORM FACTORS pg. 22 SPECIALTY PRODUCTS pg. 38 FERRULES AND SLEEVES pg. 46 POLISHING SYSTEMS pg. 52 STANDARD CONNECTOR SERIES SC-UPC
More informationINTERCONNECT CATALOGUE EDITION 2.1
INTERCONNECT CATALOGUE EDITION 2.1 STANDARD CONNECTOR SERIES pg. 04 SMALL FORM FACTORS pg. 24 SPECIALTY PRODUCTS pg. 40 FERRULES AND SLEEVES pg. 48 POLISHING SYSTEMS pg. 54 STANDARD CONNECTOR SERIES SC-UPC
More informationOptic Components - Adapters. Adapter FC-Type. Applications: CATV LAN & WAN Network Broadband FTTx. Specification
Adapter FC-Type Applications: CATV LAN & WAN Network roadband FTTx euroclust offers a full line of fibre optic adapters for every application including flanged threaded, metal, composite and hybrid or
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS PM Family (Polarization Maintaining) E- PM, F- PM - SC PM - FC PM - LSA (DIN) PM - AVIM PM, Mini AVIM PM - DMI PM DIAMOND supplies high-quality
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More informationFEATURED PRODUCTS SC & LC MINI BOOTS LC-HD TOP ADAPTER XP-SERIES LC SWITCHABLE UNIBOOT IP-SERIES LC-KEYED FLEX BOOTS PLC-WDM
LC-HD FEATURED PRODUCTS SC & LC MINI BOOTS SC & LC TOP ADAPTER IP-SERIES LC SWITCHABLE UNIBOOT XP-SERIES LC-KEYED SC & LC FLEX BOOTS PLC-WDM LC-HD CONNECTOR LC HD HIGH DENSITY CONNECTOR The SENKO LC-HD,
More informationUltra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information13-SDMS-01 REV SDMS-01, REV.00 SEC DISTRIBUTION MATERIALS SPECIFICATION DATE: G
13-SDMS-01 REV. 00 SPECIFICATIONS FOR FIBER OPTIC CONNECTIVITY COMPONENTS (PATCH CORDS, PIGTAILS, FAN-OUT CABLES AND CONNECTORS FOR INTERNAL INSTALLATIONS) This specification is property of SEC and subject
More information1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.
LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The
More informationMETRIC MIL-C-83522/16B w/amendment 1 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET
METRIC MIL-C-83522/16B 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
More informationMaverick Series Fast Ethernet, External TFOCA II *, 10/100Base-TX/FX Media Converter, 28Vdc, Multimode,1310nm
Maverick Series Fast Ethernet, External TFOCA II *, 10/100Base-TX/FX Media Converter, 28Vdc, Multimode,1310nm Dual Port, Flange Receptacles FEATURES Compliant with IEEE-802.3u Fast Ethernet Optical fi
More informationProduct information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330
Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330 1 Pcs. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius 40 mm, fastening material, labeling strips and
More informationSM 126μm SM 125.5μm MM 230μm MM 144μm
LC PREMIUM Connector 931, 932 Series LC PREMIUM UNIBODY GR 326 CERTIFIED 900µm MINI Boot CONNECTOR FERRULE TYPE HOUSING BOOT TYPE BOOT COLOR 931 LC Unibody Simplex 153 SM: Premium 125µm 1 SM: Blue B MINI
More informationFIBER OPTIC CONNECTORS AND ADAPTERS
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCT CATALOG Engineered by Imagination Suncall America provides advanced fiber optic connectors, adapters and accessories customized for any application. We re focused
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More informationSC/APC Connector. CATV Active device Telecommunication. Metro Local Area Data processing
Introduction As the industry s leading supplier of single-mode cable assemblies, Optical Fiber offers the most complete line of connectors and factory-terminated cables. From single-fiber jumpers to high
More informationRinglock is a range of robust circular
Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.
More informationA wide range of connectors are available to fit very specific needs.
By Larry Johnson In all fiber optic systems, it is necessary to join two fibers together with low signal attenuation while maintaining low reflection levels depending upon the type of system used. Fiber
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More informationLEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE FIBER OPTIC ATTENUATOR Fixed plug-in type TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Fixed plug in type Attenuator Fixed plug in fiber
More informationIntroduction to optical fibers and their applications
Introduction to optical fibers and their applications Felix Donkers Oct, 2008 (draft v0.1) Outline Introduction Optical fibers, patch cords and cables Optical fiber termination and alignment Application
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationSMU-C2 Series MU HOUSING - for ø 2 mm cord -
DOCUMENT NUMBER S05-H079-01E MU HOUSING - for ø 2 mm cord - TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationDETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER FERRULE, EPOXY
METRIC MIL-DTL-83522/16C 28 June 2013 SUPERSEDING MIL-C-83522/16B 11 May 1995 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
More informationTable 1. Termini Types
1. SCOPE. This NAVSEA Drawing covers multiple removable pin termini and socket termini which are required for circular, plug and receptacle style, fiber optic connectors respectively. The connector plugs
More information2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationPRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
More informationSubminiature, Waterproof Duplex Fiber Optic Connectors
Subminiature, Waterproof Duplex Fiber Optic Connectors MF10B Series Waterproof 2pos. Bayonet lock Highly reliable bayonet lock. When mating Sleeve Plug pin Simply by turning around the sleeve, the taper
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components NETWORK ACCESSORIES Hybrid family PC/APC MULTIMODE PC DESCRIPTION In-line hybrid adapter are used to directly mate connectors with different mechanical interface. Their optical
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
More informationSMU-P Series Single mode MU CONNECTOR PLUG
DOCUMENT NUMBER S05-H042-01E Single mode MU CONNECTOR PLUG TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
More informationOSIS by Radiall One Step Interconnection Solution
FIBER OPTIC AND MULTISIGNAL APPLICATIONS OSIS by Radiall One Step Interconnection Solution Introduction The easiest outdoor interconnection solution: in only one click! To meet the requirements of telecommunication
More informationCompact Optical Splitter Module for FTTH Outside Plant
Compact Optical Splitter Module for FTTH Outside Plant Norihiro Momotsu, 1 and Kazuya Ogata 1 Passive Optical Network (PON) system has expanded extensively as an optical network in the construction of
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationVolition. Multimode VF-45 Socket and Patch Cords. 3Innovation
Volition Multimode VF-45 Socket and Patch Cords It's as easy as plugging in a rj-45. The Volition VF-45 Socket and Patch Cords from 3M are the latest duplex, fiber optic interconnects for affordable, high
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More informationAmphe-Lite Series contacts, sealing plugs, plastic dust caps
contacts, sealing plugs, plastic dust caps STANDARD CONTACTS FOR AMPHE-LITE SERIES Pin Socket 8 (Coax) 21-33102-21 21-33101-21 8 (Twinax) 21-33190-529 21-33191-530 10 (Power) 10-251415-105 10-407035-105
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationI CHAPTER FIBEROPTIC SERIES ROBUST OPTICAL PERFORMANCE EASY CLEANING FISCHER KEY FEATURES
I CHAPTER FISCHER SERIES ROBUST OPTICAL PERFORMANCE EASY CLEANING KEY FEATURES Faultless optical performance Indoor, outdoor and extreme applications Up to IP67 (unmated) / IP68 (mated) Easy field cleaning
More informationPlug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)
Plug & Play Universal Systems Harnesses have a pinned (male) MTP connector on one end that connects to a Plug & Play Universal Systems trunk or extender trunk, while the other end is equipped with single
More informationVolition. Multimode VF-45 Socket and Patch Cords. 3Innovation
Volition Multimode VF-45 Socket and Patch Cords O b D s oc ol e um te en t It's as easy as plugging in a rj-45. The Volition VF-45 Socket and Patch Cords from 3M are the latest duplex, fiber optic interconnects
More information259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: Fax:
259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: 01276 600200 Email: info@nfi.uk.com Fax: 01276 600161 NFI UK LTD NFI UK Harsh Environment Fibre Optic Connectors NFI UK harsh environment connectors
More informationFTTH Fusion SOC / MPO / Patch Cord
/ MPO / Patch Cord Fusion Splice point Boot Life-span: 15 years Maintenance-Free Economical MPO Patch Cord Discover the difference, Unlike any other! Field installable Fusion Splice-on Connector Ilsintech's
More informationProduct information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749 1 Pcs. Front panel with staggered arrangement of adapters. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius
More informationINTERCONNECT CATALOGUE
INTERCONNECT CATALOGUE SENKO Advanced Components is a recognized leader in the design, manufacturing, sales, marketing and distribution of over 1000 fiber optic products for the global telecom and datacom
More informationPRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationConnectorized Aspheric Fiber Optic Collimators
Connectorized Aspheric Fiber Optic Collimators Diffraction limited performance Rugged stainless steel housing Pre-aligned for popular wavelengths Connectorized for quick assembly Threaded exterior for
More informationLC Uniboot V4 Connector With Hard Push Pull TECHNICAL SPECIFICATION
Version:. Document Number : SW-K-03-05 Date(yyyy/mm/dd): 07.0.4 LC Uniboot V4 Connector With Hard Push Pull For Duplex Round Cable TECHNICL SPECIFICTION pproved by Checked by Prepared by Motofuji Liu xiao
More informationFC Type Connector. Standards YD/T IEC GR-326-CORE
FC Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Standard metal parts,
More information