Enclosures LDG-A. Catalog E /10 Edition 2

Size: px

Start display at page:

Download "Enclosures LDG-A. Catalog E /10 Edition 2"

Isaac Hart
6 years ago
Views:

1 Catalog E /10 Edition 2

2 Catalog E /10 Edition 2

3 Table of Contents General information about LDG-A enclosures...2 Technical Data...3 Temperature Range...3 The base for economical and compact packaging of your electronics Terminal block design and type overview...5 Pluggable terminals and blind inserts...6 Flexibility for customized solutions...7 Enclosure versions with ventilation slots....8 Enclosure LDG-A Enclosure LDG-A Enclosure LDG-A Enclosure LDG-A Enclosure LDG-A Enclosure LDG-A Catalog E /10 Edition 2 1

Types LDG-A-12, max. 12 screw clamp terminals LDG-A-14, max. 14 screw clamp terminals LDG-A-16, max. 16 screw clamp terminals LDG-A-30, max. 30 screw clamp terminals LDG-A-46, max.

4 Types LDG-A-12, max. 12 screw clamp terminals LDG-A-14, max. 14 screw clamp terminals LDG-A-16, max. 16 screw clamp terminals LDG-A-30, max. 30 screw clamp terminals LDG-A-46, max. 46 screw clamp terminals LDG-A-70, max. 70 screw clamp terminals General The LDG-A series of enclosures are fully insulated enclosures. The screw clamp terminals are protected against accidental contact in accordance with VDE 0100 Part 570, VDE 0160 Part 100 and VBG 4. Designed for easy installation, these screw terminals can be soldered by wave, allowing the manufacturing of the PCB boards in one step. Features Snap-in design for fast end assembly Complete assembly of the unit outside of the housing before end assembly Robust self locking vibration proof terminal block screws Protection against accidental human contact Transparent cover for LED indicators Suitable frame inserts for pluggable standard connectors Base parts with and without ventilation slots Base part metallized Compact and attractive design Wall and DIN rail mountable 2 Catalog E /10 Edition 2

5 Technical Data Type LDG-A-12 LDG-A-14 LDG-A-16 LDG-A30 LDG-A-46 LDG-A-70 Degree of protection IP20 Air distances 3 mm 4 mm Creepage distances 3.2 mm 5 mm Voltage rating (IEC 60664) The permissible operating voltages depend on the customer application and on the applicable or specified safety requirements. Insulation coordination according to IEC has to be regarded for the complete electrical device. Therefore, the maximum creepage and clearance distances of the mated connectors are specified for consideration as a part of the whole current path. In practice, reductions in creepage or clearance distances may occur due to the conductive pattern of the printed board or the wiring used, and have to be taken into account separately. As a result the creepage and clearance distances for the application may be reduced compared to those of the connector. Screw clamp steel, tin plated Terminal wire size max. 2.5 mm 2 max. 4 mm 2 current rating max. 16 A max. 20 A tightening torque max. 0.4 Nm material CuSn6 Ms plating 2 µm Ni 2 µm Ni 5 µm Sn 5 µm Sn Temperature range -40 C C Base part PC (30% GF), RAL 7032, UL 94 V-1, blind plug, cover PC, UL 94 V-2 Frame insert and blind insert PC, UL 94 V-0 Outside dimensions L x B x H 75 x 22.5 x 98.5 mm 75 x 45 x 110 mm 75 x 55 x 110 mm 75 x 99.7 x 110 mm 75 x 0 x 110 mm 75 x 225 x 110 mm 75 x 22.5 x 110 mm Aprovales UL File E CSA File LR Temperature Range Inside temperature 95 Enclosure Ambient temperature Typ 23 C 50 C 70 C LDG-A- A A C A B C A B C , , Dissipation in W A = Both side faces not obstructed, free airflow B = One side face blocked by obsruction, 0 mm away C = Both side face blocked by obsruction, 0 mm away Catalog E /10 Edition 2 3

The base for all applications Fully-insulated enclosures in accordance with machinery and automotive industry standards, with

Enclosure surface with erosion-structure in attractive design. Easy assembly and disassembly for servicing.

can be implemented in compact dimensions.

6 The base for all applications Fully-insulated enclosures in accordance with machinery and automotive industry standards, with shockproof terminals acc. to VDE 0100 and VBG 4. Base part optionally with or without ventilation slots. Enclosure surface with erosion-structure in attractive design. Easy assembly and disassembly for servicing. Easy connecting technique From the connection cable via the terminal block to the PC board, the connection could not be more simple. Generously dimensioned stacking compartment Printed circuit boards can be stacked one above the other such that complex assemblies can be implemented in compact dimensions. Fast component-mounting and manufacturing times The PC board, with the mounted components and terminal blocks will be wave-soldered, in one work process and then completely assembled into the base part in one step. Just snap them on LDG-A enclosures have a snap-on clip for easy snap-on assembly for standard DIN rails acc. to DIN and DIN EN Catalog E /10 Edition 2

Terminal block design and type overview LDG-A 12

5 mm or 110 mm LDG-A 14 Length: 75 mm Width: 45 mm

plug Length: 75 mm Width: 55 mm Height: 110 mm LDG-A

7 mm Height: 110 mm LDG-A 46 Length: 75 mm Width: 0

3, narrow 3a, wide 4 Blind plug LDG-A 70 Length: 75

7 Terminal block design and type overview LDG-A 12 Length: 75 mm Width: 22.5 mm Height: 98.5 mm or 110 mm LDG-A 14 Length: 75 mm Width: 45 mm Height: 110 mm LDG-A 16 1 Terminal clamp Blind plug Length: 75 mm Width: 55 mm Height: 110 mm LDG-A 14, 16, 30, 46, 70 LDG-A 30 Length: 75 mm Width: 99.7 mm Height: 110 mm LDG-A 46 Length: 75 mm Width: 0 mm Height: 110 mm 1 Terminal clamp 2, short 2a, long 3, narrow 3a, wide 4 Blind plug LDG-A 70 Length: 75 mm Width: 225 mm Height: 110 mm Catalog E /10 Edition 2 5

Plugable terminals and blind inserts Easy service and device exchange Frame inserts with cut-out for comercially available pluggable terminal connectors Features: Used as assembly and guide element

Frame insert with top cutout for separate pin header. For maximum component space on the longitudinal board. Connection of commercially available screw-plug connectors.

LDG-A-16 Frame insert with top cutout 053869 Frame insert with bottom cutout 053870 Blind insert 053871 LDG-A-30 Frame insert with top cutout 034769 Frame insert with bottom cutout 053164 Blind

8 Plugable terminals and blind inserts Easy service and device exchange Frame inserts with cut-out for comercially available pluggable terminal connectors Features: Used as assembly and guide element for the PC board with guides for transverse board and longitudinal board offset by 90. Compact design for secure snap-on and safe fixing on the base part. Screw-on option for the cover. Frame insert with top cutout for separate pin header. For maximum component space on the longitudinal board. Connection of commercially available screw-plug connectors. Ordering information Description Color Part no. LDG-A-16 Frame insert with top cutout Frame insert with bottom cutout Blind insert LDG-A-30 Frame insert with top cutout Frame insert with bottom cutout Blind insert LDG-A-46 Frame insert with bottom insert Blind insert LDG-A-70 Blind insert Frame insert with top cutout for separate pin header. You will have the maximum component space on the PC board. Frame insert with bottom cutout allows the assembly of a transverse board. The blind insert provides for the full covering of the base part. Individual customized cutouts achieved by mechanical machining or special tool inserts are easy to be realized. Technical data Material of plastic parts: Color: Temperature range: PC UL 94 V-0 special colors upon request -40 C up to +110 C 6 Catalog E /10 Edition 2

Flexibility for customized solutions Various

transparent for display functions Customized

9 Flexibility for customized solutions Various colors, e. g. company color for base part, cover or terminal block possible in grey, or transparent for display functions Customized cutouts and holes in covers and blind inserts Catalog E /10 Edition 2 7

Versions with ventilation slots Effective heat dissipation for electronic subassemblies with increased heating Base part with ventilation slots - availiable for enclosure versions LDG-A-12, LDG-A-16,

10 Versions with ventilation slots Effective heat dissipation for electronic subassemblies with increased heating Base part with ventilation slots - availiable for enclosure versions LDG-A-12, LDG-A-16, LDG-A-30, LDG-A-46, LDG-A-70 - slot dimension: 42 x 3 mm - additional data upon request Ordering information Description Color Part no. Base part with ventilation slots LDG-A LDG-A LDG-A LDG-A LDG-A Catalog E /10 Edition 2

LDG-A 12 For max. 12 screw clamp terminals, 6 on each side Partial loaded terminal blocks with blind plugs PCB board arrangement see drawing Length: 75 mm Width: 22.5 mm Height: 98.

11 LDG-A 12 For max. 12 screw clamp terminals, 6 on each side Partial loaded terminal blocks with blind plugs PCB board arrangement see drawing Length: 75 mm Width: 22.5 mm Height: 98.5 mm or 110 mm Ordering information Description Type Color Part Number Base part 110 mm w/o ventilation slot Base part 110 mm with ventilation slot Base part 98,5 mm w/o ventilation slot transparent right left right, long right, medium right, short left, long left, medium left, short Clamp, not assembled Terminal block, fully loaded right Terminal block, fully loaded left Blind plug Catalog E /10 Edition 2 9

12 LDG-A 12 Dimensions: low height version 22,5 Deckel 20,1 1,2 5,6 Crosswise circuit board 5x3,1=,5 3,1 4, ,8 Klemmengehäuse, rechts Terminal housing, right 3,2 5,6 2,55 Klemmengehäuse, links Terminal housing, left 14,1 Klemme Terminal Schraubenloch für Blechschraube Hole for tapping screw Printklemmstift, rechts PCB terminal pin, right lang, mittel, kurz ISO 1481-ST 2,2x6, ,2 long, middle, short 98,5 Printklemmstift, links PCB terminal pin, left lang, mittel, kurz 72 55,5 Blindstopfen / Blind plug (anstelle Klemme und Print-Klemmstift) (in place of terminal and terminal pin) Lengthwise circuit board long, middle, short 1,7 Gehäuse-Unterteil Housing base 5 35,5 13,5 5,5 Rastschieber Sliding catch ,7 14, ,4 19,8 75 Recommended PCB dimensions / Lengthwise circuit board 61 54,61 52,07 48 / Crosswise circuit board 36,83 29,21 22,5 4,445 Belegungsgrenze ist abhängig von der Einbaulage der length available for components depends on the location of the 17,4 1,2 +0, ,1 max. crosswise circuit board ,1 34,29 33,7 5,08 5,08 17,78,2 10,16 88,5 13,97 5,08 5,08 17,5-0,3 2,6 +0,1 1, ,5 24,5 1,5 19 Höhe ist abhängig von der 13,25 5,5 Einbaulage der 70 8,5 height depends on location of the crosswise circuit board 71,5-0,3 17,25 Belegungsgrenze für Bauelemente mounting limit for components 10 Catalog E /10 Edition 2

13 LDG-A 12 Dimensions: standard height version 22,5 Deckel 20,1 1,2 5,6 Crosswise circuit board Klemmengehäuse, rechts Terminal housing, right Klemmengehäuse, links Terminal housing, left Klemme Terminal Schraubenloch für Blechschraube Hole for tapping screw ISO 1481-ST 2,2x6,5 Printklemmstift, links PCB terminal pin, left lang, mittel, kurz long, middle, short Printklemmstift, rechts PCB terminal pin, right lang, mittel, kurz long, middle, short Blindstopfen / Blind plug (anstelle Klemme und Print-Klemmstift) (in place of terminal and terminal pin) Lengthwise circuit board 1,7 5x3,1=,5 3,1 4, ,8 3,2 5,6 2,55 14,1 103,5 83, ,7 110 Gehäuse-Unterteil Housing base 5 35,5 13,5 5,5 Rastschieber Sliding catch ,7 14, ,4 19,8 75 Recommended PCB dimensions / Lengthwise circuit board 61 54,61 52,07 / Crosswise circuit board 48 34,29 33,7 5,08 17,78 5,08,2 36,83 29,21 22,5 4,445 13,97 10,16 Belegungsgrenze ist abhängig von der Einbaulage der length available for components depends on the location of the crosswise circuit board 17,4 1,2 +0, ,1 1,6 2,6 +0,1 max. 14, ,08 5, , ,5-0,3 24,5 1, ,25 5,5 Höhe ist abhängig von der Einbaulage der 70 71,5-0,3 8,5 17,25 height depends on location of the crosswise circuit board Belegungsgrenze für Bauelemente mounting limit for components Catalog E /10 Edition

14 LDG-A 14 For max. 14 screw clamp terminals, 7 on each side Partial loaded terminal blocks with blind plugs PCB board arrangement see drawing Length: 75 mm Width: 45 mm Height: 110 mm Ordering information Description Type Color Part Number Base part w/o ventilation slots transparent narrow wide short long Clamp, not assembled Terminal block, fully loaded narrow Terminal block, fully loaded wide Blind plug Catalog E /10 Edition 2

15 LDG-A 14 Dimensions 45 Gehäuse-Deckel 75 42,2 50,4 6x5,9= 35,4 Klemmengehäuse (schmal) 45,8 Klemmengehäuse (breit) Terminal housing (wide) 5,9 Terminal housing (narrow) 3,3 5,1 12,2 3x3,3=9,9 18,8 103,3 5 2,8 Crosswise circuit board Print-Klemmstift (kurz) PCB terminal pin (short) Print-Klemmstift (lang) PCB terminal pin (long) Lengthwise circuit board 100,5 86,5 69,8 17 Klemme Terminal 3 23,6 76,3 82,1 110 Blindstopfen / Blind plug (anstelle Klemme und Print-Klemmstift) Gehäuse-Unterteil 1,7 (in place of terminal and terminal pin) Housing base 35,5 13,5 5,5 Rastschieber Sliding catch ,8 Schraubenloch für Blechschraube Hole for tapping screw ISO 1481-ST 2,2x6, ,2 Recommended PCB dimensions / Lengthwise circuit board / Crosswise circuit board 4 30 bei breitem Klemmengehäuse for wide terminal housing 41,7-0, bei schmalem Klemmengehäuse for narrow terminal housing 12,2 6x5,9= 35,4 0,1 1,6 45 max. 99,5 max. 85,5 min. 81,6 75,8 68,8 23,6 0,1 / center of housing Mitte Gehäuse 1,6 +0,1 1,7 21,5 2,6 +0,1 1,6 42,2-0,3 49,6 8,5 13,5 40,2 Belegungsgrenze für Bauelemente Höhe ist abhängig von der Einbaulage der height depends on location of the crosswise circuit board wie gezeichnet bzw. spiegelbildlich mounting limit for components as drawn or mirror image Achtung: Im Eckenbereich verringerte Einbauhöhen Note: reduced space for components in the corner area Catalog E /10 Edition

16 LDG-A 16 For max. 16 screw clamp terminals, 8 on each side Partial loaded terminal blocks with blind plugs PCB board arrangement see drawing Special frames for pluggable standard connectors available Length: 75 mm Width: 55 mm Height: 110 mm Ordering information Description Type Color Part Number Base part Base part Clamp, not assembled Terminal block, fully loaded Terminal block, fully loaded Blind plug w/o ventilation slots with ventilation slots narrow narrow wide wide short long narrow wide transparent blue blue Frame insert for pluggable connectors Top cutout Frame insert for pluggable connectors Bottom cutout Blind insert Catalog E /10 Edition 2

17 75 50,4 45,8 2,5 5,3 12,5,3 19,1 5 R6,5 Enclosures LDG-A LDG-A 16 Dimensions Gehäuse-Deckel Klemmengehäuse (schmal) Terminal housing (narrow) Klemmengehäuse (breit) Terminal housing (wide) 6 7x6 = 42 2,8 10 Crosswise circuit board Print-Klemmstift (kurz) PCB terminal pin (short) 4x2,5= Print-Klemmstift (lang) PCB terminal pin (long) 2,5 Lengthwise circuit board 103,5 100,7 86, Klemme Terminal ,5 82,3 110 Blindstopfen / Blind plug 43,5 (anstelle Klemme und Print-Klemmstift) 1,7 (in place of terminal and terminal pin) 3,7 Gehäuse-Unterteil Housing base 35,5 13,5 5,5 Rastschieber Sliding catch 8 13, ,8 12 Schraubenloch für Blechschraube Hole for tapping screw ISO 1481-ST 2,2x6,5 37,5 50 4,5 60 Recommended PCB dimensions 62,5 / Lengthwise circuit board / Crosswise circuit board 51,5-0, bei breitem Klemmengehäuse for wide terminal housing bei schmalem Klemmengehäuse for narrow terminal housing 45 12,5 max. 7x6 = 42 0,1 1,6 1,6 +0,1 2,6 +0,1 1,6 99,7 max. 85,4 min ,5 3,3 30 0,1 / center of housing Mitte Gehäuse 1,7 3,3 21,5 43,5 49,6 52-0,3 8,5 12, ,6 Höhe ist abhängig von der Einbaulage der 50 Belegungsgrenze für Bauelemente wie gezeichnet bzw. spiegelbildlich mounting limit for components as drawn or mirror image height depends on location of the crosswise circuit board Achtung: Note: Im Eckenbereich verringerte Einbauhöhen reduced space for components in the corner area Catalog E /10 Edition 2

18 LDG-A 30 For max. 30 screw clamp terminals, on each side Partial loaded terminal blocks with blind plugs PCB board arrangement see drawing Usage of standard connectors Special frames for pluggable standard connectors available Pitch of 5.08 mm allows connection of 17 wires on each side Length: 75 mm Width: 99.7 mm Height: 110 mm Ordering information Description Type Color Part Number Base part Base part Clamp, not assemnbled Terminal block, fully loaded Terminal block, fully loaded Blind plug Frame insert for pluggable w/o ventilation slots with ventilation slots narrow narrow wide wide short long narrow wide transparent blue blue connectors Top cutout Frame insert for pluggable connectors Bottom cutout Blind insert Catalog E /10 Edition 2

19 LDG-A 30 Dimensions 75 50,4 45,8 3,3 5,1 12,2 18,8 5 Gehäuse-Deckel 99,7 96,7 Klemmengehäuse (schmal) Terminal housing (narrow) Klemmengehäuse (breit) Terminal housing (wide) 6 14x6= 84 2,8 Crosswise circuit board Print-Klemmstift (kurz) PCB terminal pin (short) 3x3,3=9,9 Print-Klemmstift (lang) PCB terminal pin (long) 72 Lengthwise circuit board 103,5 100,7 86, Klemme Terminal ,5 82,3 110 Blindstopfen / Blind plug 43,5 (anstelle Klemme und Print-Klemmstift) 1,7 (in place of terminal and terminal pin) 3,7 Gehäuse-Unterteil Housing base 35,5 13,5 5,5 Rastschieber Sliding catch 3 5,2 8 12,4 auf Wunsch mit Lüftungsschlitzen 72 with ventilation holes on request 39,8 12 Schraubenloch für Blechschraube Hole for tapping screw ISO 1481-ST 2,2x6, ,7 4,5 R6, ,5 Recommended PCB dimensions / Lengthwise circuit board / Crosswise circuit board bei breitem Klemmengehäuse for wide terminal housing bei schmalem Klemmengehäuse for narrow terminal housing 1,6 +0,1 2,6 +0, max. 99,7 min. 85, ,5 ϒ ϒ ϒ 3,3 1,7 3,3 21,7 / center of housing 43, max x6= 84 ± ± Mitte Gehäuse 12,6 Höhe ist abhängig von der Einbaulage der ,6 13,6 Belegungsgrenze für Bauelemente wie gezeichnet bzw. spiegelbildlich mounting limit for components as drawn or mirror image height depends on location of the crosswise circuit board Achtung: Im Eckenbereich verringerte Einbauhöhen Note: reduced space for components in the corner area Catalog E /10 Edition

20 LDG-A 46 For max. 46 screw clamp terminals, 23 on each side Partial loaded terminal blocks with blind plugs PCB board arrangement see drawing Usage of standard connectors Special frames for pluggable standard connectors available Pitch of 5.08 mm allows connection of 26 wires on each side Length: 75 mm Width: 0 mm Height: 110 mm Ordering information Description Type Color Part Number Base part Base part Clamp, not assemnbled Terminal block, fully loaded Terminal block, fully loaded Blind plug w/o ventilation slots with ventilation slots narrow wide short long narrow wide transparent Frame insert for pluggable connectors Bottom cutout Blind insert Catalog E /10 Edition 2

21 5 Enclosures LDG-A LDG-A 46 Dimensions Gehäuse-Deckel 75 50,4 Sonderschraube Special screw ,8 Klemmengehäuse (breit) 22x6= 132 Klemmengehäuse (schmal) Terminal housing (narrow) 39,8 Terminal housing (wide) 6 3,3 2x3,3= 6,6 12,3 18,8 4,6 Crosswise circuit board Print-Klemmstift (kurz) PCB terminal pin (short) Print-Klemmstift (lang) PCB terminal pin (long) 120 Lengthwise circuit board 102,3 99,5 85,5 68,8 17 Klemme Terminal ,3 81,1 110 Blindstopfen / Blind plug 43,3 (anstelle Klemme und Print-Klemmstift) 2,5 (in place of terminal and terminal pin) 2,6 Gehäuse-Unterteil Housing base 35,5 12,5 4,9 Rastschieber Sliding catch ,4 5, ,8 12 Schraubenloch für Blechschraube Hole for tapping screw ISO 1481-ST 2,2x6,5 auf Wunsch mit Lüftungsschlitzen with ventilation holes on request 134, ,5 R7, ,5 Recommended PCB dimensions / Lengthwise circuit board / Crosswise circuit board 39 max bei breitem Klemmengehäuse for wide terminal housing x6= 132± bei schmalem Klemmengehäuse for narrow terminal housing 120 ± max min ,3 2,2 ϒ / center of housing ϒ 2,2 ϒ 2,5 20,6 Ø ,3 Ø Mitte Gehäuse 144-0,3 12, ,6 Belegungsgrenze für Bauelemente Höhe ist abhängig von der Einbaulage der height depends on location of the crosswise circuit board Achtung: Note: Im Eckenbereich verringerte Einbauhöhen reduced space for components in the corner area wie gezeichnet, bzw. spiegelbildlich mounting limit for components as drawn or mirror image Catalog E /10 Edition

22 LDG-A 70 For max. 70 screw clamp terminals, 35 on each side, clamp pitch 6 mm Partial loaded terminal blocks with blind plugs PCB board arrangement see drawing Usage of standard connectors Special frames for pluggable standard connectors available Pitch of 5.08 mm allows connection of 41 wires on each side Length: 75 mm Width: 225 mm Height: 110 mm Ordering information Description Type Color Part Number Base part Base part Clamp, not assemnbled Terminal block, fully loaded Terminal block, fully loaded Blind plug Blind insert w/o ventilation slots with ventilation slots narrow narrow wide wide short long narrow wide transparent blue blue Catalog E /10 Edition 2

23 5 Enclosures LDG-A LDG-A 70 Dimensions Gehäuse-Deckel 75 50,4 Sonderschraube Special screw 224,7 219,7 34x6= ,8 Klemmengehäuse (breit) Klemmengehäuse (schmal) 39,8 Terminal housing (wide) 6 Terminal housing (narrow) 3,3 12,3 18,8 4,6 Crosswise circuit board Print-Klemmstift (kurz) PCB terminal pin (short) 2x3,3= 6,6 Print-Klemmstift (lang) PCB terminal pin (long) 192 Lengthwise circuit board 102,3 99,5 85,5 68,8 17 Klemme Terminal ,3 81,1 110 Blindstopfen / Blind plug 43,3 (anstelle Klemme und Print-Klemmstift) 2,5 (in place of terminal and terminal pin) 2,6 Gehäuse-Unterteil Housing base 35,5 12,5 4,9 Rastschieber Sliding catch ,4 5,2 Schraubenloch für Blechschraube Hole for tapping screw 70 ISO 1481-ST 2,2x6,5 39,8 12 auf Wunsch mit Lüftungsschlitzen with ventilation holes on request ,7 4,5 R7, ,5 219,2-0,3 34x6= 204 0, ,1 2,2 43,3 2,2 2,5 20,6 43,3 219,7-0,3 Recommended PCB dimensions / Lengthwise circuit board / Crosswise circuit board bei breitem Klemmengehäuse for wide terminal housing bei schmalem Klemmengehäuse for narrow terminal housing max Ø max min / center of housing Ø Mitte Gehäuse 12,6 10,5 10, ,6 217,7 Höhe ist abhängig von der Einbaulage der height depends on location of the crosswise circuit board Achtung: Im Eckenbereich verringerte Einbauhöhen Note: reduced space for components in the corner area Belegungsgrenze für Bauelemente wie gezeichnet, bzw. spiegelbildlich mounting limit for components as drawn or mirror image Catalog E /10 Edition

24 ERNI Electronics GmbH Seestrasse Adelberg/Germany Tel Fax info@erni.de Europe South America Africa Japan ERNI Electronics, Inc Westwood Ave Richmond, VA 23230/USA Tel Fax info@erni.us North America Canada Mexico ERNI Asia Holding Pte Ltd. Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore Tel Fax info@erni-asia.com Asia ERNI Electronics GmbH 2010 Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI, MicroStac, MicroSpeed, MiniBridge, MaxiBridge, ERmet, ERmet ZD, ERbic and ERNIPRESS are trademarks (registered or applied for in various countries) of ERNI Electronics GmbH. Catalog E /10 Edition 2

IDG-B Enclosures for Industrial and Building Automation Controls.

IDG-B Enclosures for Industrial and Building Automation Controls. for Industrial and Building Automation Controls www.erni.com Katalog Catalog D E 074595 074518 Ausgabe 09/11 3, 03/05 www.erni.com Edition 2 1 www.erni.com Catalog E 074595 09/11 Edition 2 Table of Contents