Quality & Metering. Current transformers for billing and accessories

Transcription

1 Quality & Metering Current transformers for billing and accessories

2 Introduction Q3-7 Q.3 - Billing transformers and accessories TRMC Current transformers for meters with source verification Q3-7 RTC Modem RTC Modem Q3-9 Modem RS-232 / 485 GSM / GPRS Q3-11 LOC Optical reader for CIRWATT Q3-15 LM6I2O-PLC Concentrator of 4 impulse inputs with PLC communications Q3-16 PowerWatt PowerWatt Pro and PowerWatt LT SQL Software Q3-18 SoftWatt Software used to program CIRWATT Q3-21 PowerPLC Software for the communications of PLC-800 Q3-25 PowerVision Software used to configure, read and display the files of equipment with memory Q3-26 PowerStudio Energy supervision and preventive maintenance of lines and electric installations Q3-28 PowerStudio SCADA Energy supervision, preventive maintenance of electric lines and installations and allocation of department or production process costs. Q3-29 SGC4 Box Q3-29 Q3-2

3 Billing transformers and accessories This section describes the current transformers used in Low Voltage installations and a wide variety of accessories, for both QNA and CIRWATT. Some of the accessories include modems, for example, RTC (analogue) and type GSM, ideal for communications in points where there is no analogue line. Another accessory is the universal optical readers for meters, converters, etc. Highlighting the software available. We have the following software: Powerwatt is a remote metering and management software for meters. Softwatt is a program that has been designed for electricity companies, energy merchants and users that have been authorised to program meters for energy billing purposes. PowerPLC is the management and control software of the meters with PLC communications. PowerStudio is a control software that is focused on energy efficiency for the management of products. Q.3 Definition The installation of meters to bill electrical energy requires the installation of current transformers that have been certified by the electricity company. CIR- CUTOR has a wide range of products that can meet the consumer's requirements in each type of installation with the TRMC transformers. This completes the installation of billing meters, in accordance with the market specifications. Likewise, there are various communication methods proposed to guarantee the total control of the remote meter, depending on the nature of each installation. Analogue and GSM modems are vital elements in remote metering processes. The availability of a dedicated telephone line will allow us to select the type of modem that will be installed. In the case of field metering activities, CIR- CUTOR has meters with an optical port to download the information. The use of the PC's software is vital to download and treat the information stored in the meter's memory. CIRCU- TOR offers different types of software for each application, in order to cater for the customer's needs, from programming to data treatment software. The software range also includes the management of our QNA power quality analyzers, with a powerful application used to control the information, allowing the download of the memory to carry out studies about the behaviour of the grid in each installation. Q3-3

4 Applications Data is downloaded and treated by the meters of the CIRWATT series with various options, depending on the typology of each installation. There is an exclusive telephone line that requires the installation of analogue modems to read the meters. However, if their location means that the installation of a fixed analogue line is improbable, a GSM modem must be connected, with greater accessibility options, since it does not need an additional installation to carry out its functions. CIRCUTOR offers specialised software, such as the SoftWatt range, focused on the operations of electricity companies and energy distribution companies, to program and meter all electrical energy parameters. Watt Pro includes the simulation of bills of the current electricity market, in order to carry out adjusted studies about the cost of electricity bills. Our range of analyzers of the QNA-400 series enables many different grid configurations: RS-232 / RS-485 / Ethernet and GSM-GPRS. PowerVision has been designed to meter the parameters that define the quality of the grid in an installation, while acting as grid analyzers, and it is capable of creating graphs and lists with any electrical parameter required to make a complete study of the grid's behaviour in any industrial environment. The PowerWatt series is offered to end users to read and download data, with the purpose of controlling the consumption and installation. In addition Power- Q3-4

5 Product selection table Equipment Description Page TRMC 210 Current transformers for meters - Wound primary type 7 TRMC 400 Current transformers for meters - Bus bar type 7 RTC Modem Analogue modem for direct lines 9 Modem Modem RS-232 / 485 GSM / GPRS 11 LOC Optical port reader to read CIRWATT 15 LM6I2O Concentrator of 6 impulse inputs with PLC 16 PowerWatt Software used to meter, display, download and simulate meter bills 18 SoftWatt Software used to program CIRWATT 21 PowerPLC Software for the communications ofplc 25 PowerVision Software used to configure, read and display the files of equipment with memory 26 PowerStudio Energy management software 28 Q3-5

6 Q3-6 Current transformers for billing and accessories

7 TRMC Current transformers for meters with source verification Description Features Current transformers used in Low Voltage installations, in applications with official measurements and used to bill energy, since they comply with the specifications of the Spanish electricity companies. Resin is used as an exterior insulation element to provide a set of characteristics that increase the quality of the transformer when compared to other conventional insulation systems. The most important properties of this type of insulation are: High mechanical resistance Great dielectric strength Self-extinguishing (VO Degree) Tropicalization Impossibility of tampering with the transformer, preventing any form of access to the internal elements. Features TRMC 210 TRMC 400 Class 0.5 / 15 V A or 0.5S / 10 V 0.5 / 15 V A or 0.5S / 10 V Encapsulation In resin (wound primary) In resin (bus bar) Maximum operating voltage 0.72 kvac 0.72 kvac Primary current A ,500 A Secondary current 5 A 5 A Insulation voltage 3 kv 3 kv Safety factor S F < 5 S F < 5 Frequency 50 / 60 Hz 50 / 60 Hz Thermal class B B Application Thermal short-circuit current I th = 60 I n I th = 60 I n Current transformers for energy meters. Used in Low Voltage installations. Dynamic current I dyn = 2.5 I th I dyn = 2.5 I th Standards IEC , UNE EN Q3-7

8 TRMC Current transformers for meters with source verification Dimensions TRMC 210 TRMC 210 a b 100/5 150/5 200/5 300/5 400/5 500/5 600/ References TRMC 400 A Class 0.5S V A Class 0.5 V A Type Code 100/5 10 TRMC 210 Q /5 10 TRMC 210 Q /5 10 TRMC 210 Q /5 10 TRMC 210 Q /5 10 TRMC 210 Q /5 10 TRMC 210 Q /5 10 TRMC 210 Q /5 15 TRMC 210 Q /5 15 TRMC 210 Q /5 15 TRMC 210 Q /5 15 TRMC 210 Q30964 Connections 400/5 15 TRMC 210 Q /5 15 TRMC 210 Q /5 15 TRMC 210 Q30967 Hacia contador de facturación 750/5 10 TRMC 400 Q /5 10 TRMC 400 Q30912 L1 S1 P1 S2 P /5 10 TRMC 400 Q /5 10 TRMC 400 Q30914 L2 S1 P1 S2 P2 750/5 15 TRMC 400 Q /5 15 TRMC 400 Q30972 L3 S1 P1 S2 P /5 15 TRMC 400 Q /5 15 TRMC 400 Q30974 Q3-8

9 RTC Modem RTC Modem Description Features RTC modem, with 230 Vac power supply, cable to connect to the PC and it supports various data transmission types. Features Data speed (modem) , , , , , , , , 9 600, 7 200, 4 800, 2 400, and bps Application Used to read meters with an analogue telephone line. Its direct connection to any RS-232 port of the meter can be used to receive calls for the control and download of data and meter records. Data format (modem) Conversion speed Work mode Flow control Series, binary and asynchronous Serial port speed adjustable to 300, 1 200, 2 400, 4 800, 9 600, , , and bps Half or full duplex mode, manual or automatic dialling and manual or automatic response XON / XOFF, hardware (RTS/CTS), HP (ENQ/ACK) Programming With HV commands Transmission level -13 dbm Connectors DB25 Connectors, two RJ-11 telephone connectors and a power supply connector, jack type Cables Indicators Cable with RJ-11 telephone connector, DB-25/DB-9 communications cable and external power supply cable Data transmission and reception LEDs Carrier Detect, 28,8 kbps, 14,4 kbps, 9600 bps, Off Hook, Terminal Ready, Error Correction, Fax Manual control Manual ON/OFF switch Environment Temperature range: ºC ( ºF) Humidity range: % (non-condensing) Power supply Voltage: Vac Frequency: 50 / 60 Hz Consumption: 0.1 A / 5 W Dimensions 108 x 148 x 29 mm Q3-9

10 RTC Modem RTC Modem Dimensions References Description Type Code RTC Modem - certified by REE (includes power supply + cable) RTC Modem (without parity) Q30201IB RTC Modem - certified by REE (includes power supply + cable) RTC Modem (pair parity) Q30201EN Connections Q3-10

11 Modem RS-232 / 485 GSM / GPRS Description Features This modem has GSM and GPRS communications, it is used for installations where there is not an analog telephone line. The device is able to be configured local or remotely. With GPRS communication through a fix IP address and coverage signal by internal LED s. Application The device is connected with the meters by a GSM phone call or via GPRS. With two communication channels: RS-232 and RS-485 that receives calls to control and data download from the meter. Power supply Voltage range Power consumption Interfaces GSM GSM Antenna type Interfaces Meter connection V, 50Hz 10 VA active mode 6 VA passive mode GSM Rec asynchronous, Non- Transparent, 9,6 kbit/s, Modem type V.32, RLP according to GSM Rec. 4.22, ISDN-type V.110, small SIM with or without PIN GSM-900 MHz or GSM-1800 MHz, 2 Watt transmit power Antenna (mounting clip) cable 1,5m Magnet holder antenna cable 2,5m FME connector RS232 up to 19,2 kbit/s, full duplex, (Rx, Tx, GND, DTR) via RJ-45 connector RS485 up to 32 Transceiver, 2-wire, 19,2 Bit/s, 1000m cable length fixed RS-232: Connection with only one meter. The maximum distance allowed between meter and modem is 15 m. RS-485: Possibility to communicate up to 32 meters using one modem. The maximum distance is 1200 m. Climatic conditions Protection type IP 51 Dimensions Baud rate or Mode C Data format : 8N1 or 8E1 Operating temperature : ºC Storage temperature: ºC Humidity range: 0-95 % relativ, non condensing Terminal cover or meter board H=180mm, W=105mm, T=70mm Q3-11

12 Modem RS-232 / 485 GSM / GPRS Dimensions References Description Type Código Modem GSM/GPRS ( includes antenna + communication wire RS-232) Modem GSM (non parity) Q30213IB Modem GSM/GPRS ( includes antenna + communication wire RS-232) Modem GSM (even parity) Q30213EN Amplified antenna 9 db Amplified antenna Q4994E Connections RJ 45 (Modem) DB9 Femmale RS-232 (CWT) RJ12 (CWT) PIN 4 5 PIN 1 y 6 (Join) PIN 5 2 PIN 2 PIN 6 3 PIN 3 Join 4-6 / Join 7-8 Connection RS-232 RS-232 Interface (RJ45 - Jack) PIN Signal Description 2 DCD Output: Active for GSM connection 4 GND Signal ground 5 TXD Output: data to meter 6 RXD Input: data from meter Signals and levels according to V.24 / V.28. All other pins are reserved. RS-485 Interface (terminal block) Signal Description RT- Negative RS-485 interface signal RT+ Positive RE-485 interface signal Dual-wire RS-485 interface to connect up to 32 transceivers. The bus connection is terminated to Z=120 Ω (nominal) (RT+ a RT-) and the cable length is limited to 1200m. Connection RS-485 Q3-12

13 LOC Optical reader for CIRWATT Description Features The LOC universal optical reader is a vital metering and programming element for CIR- WATT meters. Features Level of signals Compatible with EIA232D Application Maximum data speed b/s The optical reader is a two-directional infrared interface with galvanic insulation. When connected to the serial port or USB of a PC, it allows the communications with meters or any other device, in compliance with the IEC 1107:1996 international Standard. The reader does not require an external power supply, obtaining the energy required for the communications through the PC. Power supply Cable length RJ-45 Fixing (magnet) Optical Not required. Powered by the PC 2 m DB9 female, cabled for standard IBM-PC / USB With magnetic adhesion, in accordance with IEC 1107:1996 In compliance with the IEC 1107:1996 Standard Mechanical In compliance with IEC 1107:1996 R eferences Description Type Code Optical reader for CIRWATT LOC Q30301 Optical reader for CIRWATT USB port LOC-USB Q30302 Q3-13

14 LM6I2O PLC Concentrator of 4 impulse inputs with PLC communications Description The LM6I2O is a device able to be connected to a PLC communication network, it takes the readings from any device that emits impulses such as water, gas or heat meter. Features It has six inputs that are isolated from the main supply. The impulses account of each one are sent by PLC communications to the concentrator PLC 800. Power supply Nominal voltage 127 V to 230 V Frequency 50 or 60 Hz Operating temperature ºC Also it has two outputs which can actuate on contactors, acoustic and/ or luminous devices for non critical alarms. The device will use the PLC network, the RS-232 or RS-485 (optional) communication port. Memory (optional) RTC Data Battery (optional) Type Working life Clock (optional) External saved from battery Non volatile Lithium > 20 years Application The LM6I2O PLC has six inputs which counts the impulses of an external meter. These inputs are isolated from the main network and are independent one from the others. Type Quartz oscillator Drift < 0.5 s/day at 25 ºC Digital inputs Type Octocoupled (5 V) Compatibility UNE-EN Maximum impulses per second 8 The LM6I2O will send the accumulated readings to the PLC800 concentrator. Optionally, it can store an hourly load profile from each input. That profile can be downloaded in order to give all the information to create a billing system. This load profile has a capacity of 31 days, it will be stored into the PLC 800 concentrator or it can be downloaded directly with the serial port. These inputs have a limit of impulses. After that, the input value will be put to 0. The capacity of these inputs is up to 10 impulses for a second. The device also has two relay outputs and working with them it is possible to read its status or to open and close them remotely. Minimum pulse width Maximum ON impedance of pulses generator device Presence of pulse Absence of pulse Digital outputs Type Relay Communications Type Baud rate Build features Enclosure Degree of protection 25 ms 1 kω INPUT and COM short-circuited INPUT and COM opened Mechanical 250 V a.c. // 5 A a.c. Isolated RS-232 or RS-485 (optional) 9600 bps DIN rail Terminals: IP 20 Enclosure: IP 41 Q3-14

15 LM6I2O PLC Concentrator of 4 impulse inputs with PLC communications Dimensions References Model Code Power Supply V a.c. Communications band Power Supply 3 x 230/400 V 3 x 127/220 V Communication COM1 Communication COM2 Inputs Outputs LM6I20 - PLC A Q30217 PLC A RS-232 PLC A 6 2 LM6I20 - PLC A Q PLC A RS-485 PLC A 6 2 LM6I20 - PLC B Q30218 PLC B RS-232 PLC B 6 2 LM6I20 - PLC B Q PLC B RS-485 PLC B 6 2 Connections 230V POWER GND TX RX SUPPLY backside of the connector ON PLC REL1 REL2 REL1 REL2 I1 I2 I3 CI 4I 5I 6C LOAD LOAD Q3-15

16 PowerWatt PowerWatt Pro and PowerWatt LT SQL Software Description References PowerWatt Pro and PowerWatt LT SQL are software packages that have been specially designed to interact with the multi-functional CIRWATT three-phase meters. PowerWatt Pro and PowerWatt LT SQL have been designed for remote metering applications and the management of energy meters, enabling a permanent control of their consumption. They are easy to use and the interface is oriented to any type of user. Application This software is a tool that can be used to interact with meters and its purpose is to guarantee the total control of the information: Description Type Code Visualization / simulation of receipts (USB port license) PowerWatt Pro Q30422 Information management software used for three-phase meters PowerWatt LT SQL Q30423 Minimum requirements Operating System Windows 2000 SP4, Windows 2003 Server SP1, Windows XP SP2, Windows Vista (32 bits) RAM Memory 256 MB Processor Pentium III, 1 GHz Memory 30 MB free disk space Safety Real-time monitoring of the value of the variables metered by the meter. Reading the configuration of different parameters. Downloading the files to the units and programming these downloads so that they are carried out automatically. Exporting files in standard format. Display of download parameters in tables and graphs. In order to protect the information, the PowerWatt readingsoftware has different program access levels. There two types of user with access keys: Users that can use any type of program function Users that can only read the meters Communications Communications with the meters can be established as follows: Modem. Different modems can be registered, including their initialisation strings, independent for each modem. Local communications. With serial ports, USB converters or with optical ports, with the CIR- WATT (LOC) Optical Reader TCP/IP. Through the CIRCUTOR (TCP2RS) converter, with a connection to the meter through an IP connection and the TCP / IP / TCP / UDP protocol Q3-16

17 PowerWatt PowerWatt Pro and PowerWatt LT SQL Software Database A database stores the information from each meter, including: ID Link address / metering point / access key / password Telephone No. Type of download (manual / automatic) Types of files downloaded manually (specified by contract) No. of retries in the communications with modems Read constant Transformation Ratios Resolution Serial No. A different database will link each meter to the following fields: Client Company Group Zone Rate Energy billing PowerWatt * can be used to bill the energy with a flexible approach, using the energy consumption profile recorded in each CIRWATT meter as the source data. It is configured with the definition of an annual calendar, allocating a profile of billing periods for each type of day. The calendar programming approach is flexible and can be configured by the user. The program includes various pre-configured calendars. The results can be displayed on lists or graphs with the curve of periods or receipts. * Only in PowerWatt Pro Q3-17

18 PowerWatt PowerWatt Pro SQL and PowerWatt LT SQL Software Utilities The program has a series of utilities, such as: Import or export of data in different formats Maintenance of the database, selecting the maximum recording period Performing backup copies Receipts / Lists / Graphs The invoice can be simulated with the tariff establishing system designed by the PowerWatt Pro program, or with the rates obtained by the meter (billing closing files), displaying the results with the default calculations on the invoice. PowerWatt can be used for the graphical display of: Hourly load curve ¼ Hourly load curve Mean power curve during 15 minutes (values calculated with the ¼ hourly load curve) Billing closing graphs (by month, with rates established and not established) Events In any case, the data display period can be selected. Q3-18

19 SoftWatt Software used to program CIRWATT Description References The SoftWatt software can be used by: electricity companies, energy distribution companies and merchants and users with the authorization to program meters used for energy billing purposes. Description Type Code Programming CIRWATT meters SoftWatt Q30411 Minimum requirements Application SoftWatt is used to configure CIRWATT meters and it has been structured with files that can be used to program various meters with the same configuration. The program is structured in various parts, where different parameters will be programmed, with an hourly discrimination, communication parameters, recording period of the load curve, configuration of inputs and outputs, etc. The configuration can be sent partially for each parameter. Operating System Windows XP, Windows NT (4.0 or higher), Windows 2000 or Windows 7 (32 or 64 bits version) RAM Memory 32 MB Processor Pentium 133 MHz Screen resolution Minimum 800 x 600 pixels Memory 60 MB free disk space Billing / Contracts SoftWatt can be used to configure the three contracts available in the most complex types. It can configure active and latent contracts (an operations start date is programmed). An annual calendar is programmed for each contract, which will not be modified in the coming years. There are 2 types of calendars: Seasonal calendar: Two types of seasons are defined: Winter and Summer. The change of season takes place with the hourly adjustment Peak/Off-peak calendar: This calendar works with the peak and off-peak seasons and each will select the hourly profile for working days and weekends. There are up to 12 seasons and 10 hourly profiles Q3-19

20 SoftWatt Software used to program CIRWATT Billing / Contracts The festivities and special days are selected in the annual calendar, since they have a different profile than working days. (For its application during the current year or coming years). All profiles can be easily and intuitively configured. The billing closing configuration involves the selection of a date and hour for each month, where the unit can carry out the automatic closing activities. If this option is selected, the unit does not carry out the closing operations. Sending / Receiving the Configuration Indication of the metering point, link address and access key, in order to receive the meter's configuration. We can select the configuration elements that will be sent, with no need to send the whole configuration. (The metering point, link address and write access key must be indicated before). The configuration will be sent / received locally or remotely. Safety The program can configure various users with passwords to access different levels of the program. Two levels of protection: Programming that only needs the write key and programming that needs the write key and removing the meter's seal (programming with a transformation ratio, for example). Q3-20

21 PowerPLC Software for the communications of PLC-800 Description References Power PLC is a software designed to configure and control the PLC (Power line communication) remote management system from CIRCUTOR. One of the main characteristics of this software is its friendly interface. User can easily interact with meters and concentrators PLC 800 either local or remotely. With this application the remote management system is simplified reducing the time to program the meters. Using Power PLC all the parameters can be set avoiding to go to the installations to do any modification. Application Description Type Code Software for the communications of PLC-800 PowerPLC Q30411 Minimum requirements Operative system Windows Me, Windows NT (4.0 or superior), Windows 2000, Windows XP or Windows (32 or 64 bits depending on version) RAM Memory 128 MB CPU Pentium III 550 MHz Screen resolution Minimum 800 x 600 pixels Memory 30 MB of avaiable hard-disk space Power PLC main applications are: PLC 800 remote configuration: Connection type, folder administration, external ftp configuration, language, PLC 800 firmware update, select the day of sending information, etc. Information about the devices detected by the concentrator: Serial number, device status, last communication, device model, etc. Tasks setup: Different tasks can be individually or massive sent to the meters through the concentrator: Set new tariffs, contracted currents, bill closures, relay status, etc. The user can define when the task will be done, indicating the period when the concentrator will send the task to the different meters. Task management: This option allows monitoring all the tasks sent to the meters and its status. All the tasks can be filtered so it is possible to know the real status of each task. Different filters can be selected: Serial number, task, task status, etc. All that information can be exported to *.CSV format. Instant values: Through Power PLC the user can read real time different values: Active energies, reactive energies, powers, voltage, current, power factor, relay status, meter status, etc. Events management: This option allows checking all the events registered by the meters which are connected to the PLC 800 concentrator. Different filters can be selected: Serial number, event type, etc. All that information can be exported to *.CSV format. Q3-21

22 References Description Type Code Software for the communications of PLC-800 PowerPLC M90411 Minimum requirements Operating System Windows Me, Windows NT (4.0 or higher), Windows 2000 or Windows XP RAM Memory 128 MB Processor Pentium III 550 MHz Screen resolution Minimum 800 x 600 pixels Memory 30 MB free disk space Q3-22

23 PowerVision Software used to configure, read and display the files of equipment with memory Description References PowerVision is a software used for the remote control and metering of the information recorded by the QNA electrical power supply quality and AR5 or AR5-L portable analyzers. It is a high-performance tool that increases the power of the information recorded by the units. PowerVision can be used by expert and novice users to quickly and easily achieve the maximum performance of the information. All in all, it is a very simple, flexible and powerful tool. Application Visualisation of all electrical parameters in real time (QNA). Connection to many different units locally and remotely. Automatic download of files (partial, by week / month and total) (QNA). Communications with AR5-L / AR5, CVM-BDM and QNA. Description Type Code Configuration, reading and display of units with memory PowerVisión M90411 Minimum requirements Operating System Windows Me, Windows NT (4.0 or higher), Windows 2000 or Windows XP RAM Memory 128 MB Processor Pentium II 300 MHz Screen resolution Minimum 800 x 600 pixels Memory 30 MB free disk space Standard Automatic calculation of files, applying the EN Standard or other standards defined by the user Optional application of filters to harmonic graphs, comparing them with the EN Standard or other levels defined by the user Automatic creation of power supply quality reports Analysis of the alteration file with optional filters (AR5 / AR5-L) Q3-23

24 PowerVision Software used to configure, read and display the files of equipment with memory Management of information Display of graphs and lists of all variables Export of information to.txt files Graphical and/or numerical presentation of the results Printout of analysis Export of graphs and tables to ".bmp" Graphical study or analysis of the tables of data obtained by the unit Temporary evolution graphs Configurable graphs: colour, type of graph (bar, lines, points or areas), etc. Communications This part of the program allows the user to configure the unit locally (RS-232) or remotely (RS- 485, Modem RTC, GSM, Ethernet), while displaying in real time the information metered by the unit and downloading it automatically, indicating the time periods (day and hour) when the information will be downloaded. The automatic download of information allows the user to choose which files will be downloaded and when they will be downloaded. Therefore, it is not necessary to waste time connecting to one or more units, since the program is responsible for downloading the information automatically from the units selected by the user. Graphs PowerVision can be used to obtain the highest performance of the information, with graphs and lists of more than 200 variables, exports to text files (.txt) for their subsequent treatment from other applications, and even the direct application of quality standards, in order to determine whether the voltage supplied complies with the current regulations or not. Q3-24

25 PowerStudio Energy supervision and preventive maintenance of lines and electric installations (limited version of PowerStudio Scada) Description examples This software can be used by the user to guarantee the total control of the installation, obtaining first hand and real time information about the status of the power lines and the general consumption of the low and medium voltage installation. Said control is important, since it can ensure that the preventive maintenance tasks will have an excellent efficiency, while controlling a large number of electrical parameters. Said supervision activities with the adequate meters will include the control of a large quantity of electrical and process parameters. Application Remote establishing of the units' parameters Display of parameters in real time Record logs Display of logs with tables and graphs Printing graphs and tables Software Multi-position (Web server) with static screens Integrated XML and DDE server (for the exchange of information with other applications marketed Very versatile and easy to use Access to the Internet with a password and optional creation of an access profile Q3-25

26 PowerStudio SCADA Energy supervision, preventive maintenance of electric lines and installations and allocation of department or production process costs. Description examples It is necessary to have a centralised data gathering system as a result of the large volume of data provided by the metering station. PowerStudio SCADA has been designed to act as a centralising and information management unit. In addition, it can be used by any user to create their own customised screens. The objective of this software is to process data and prepare reports, with the purpose of adopting the adequate corrective or preventive measures during the installation. This is why CIRCUTOR has developed the Power- Studio Scada integral energy management software. All in all, this software enables the integration of CIRCUTOR's equipment for its management, such as the QNA network analyzers, CIRWATT energy meters, protection devices and more. In addition, all of this equipment can be integrated in any other SCADA system marketed, since the protocols used are standard and they comply with the communications regulations in each case (Modbus/ RTU, Modbus/TCP, Profibus DP, Johnson Controls or XML). Q3-26

27 PowerStudio SCADA Energy supervision, preventive maintenance of electric lines and installations and allocation of department or production process costs. Performance Remote establishing of the units' parameters: It enables the on-line establishing of parameters of all units connected, thus facilitating the configuration of all units from the control unit. The following can be programmed with the PowerStudio SCADA: coming from each CIRCUTOR unit. Display of logs on tables or graphs: PowerStudio SCADA records all of the parameters mentioned above to generate graphs and tables with the different electrical parameters, grouped in accordance with the customer's needs (day, week or month). Voltage and current transformation ratios. Digital inputs and outputs and analogue outputs. Display of parameters in real time: It displays the parameters of all units in real time, knowing the installation's behaviour and status of the electrical distribution lines of the installation at all times. Said communications are possible, since PowerStudio SCADA is in constant communication with the units (pulling). This information is used to display the evolution of any electrical or process parameter in time, also displaying the increase of totalized variables in time (energy). The user can print any graph or table generated by the software. Alarm module: The previous programming tasks are used by the user to display any incident in the installation in real time. Data can be displayed in digital (number) or analogue (bars) format, indicating the colours (red, orange, green) of the variables that are outside the limits. Record log: Alarms can be associated easily to any parameter available in the PowerStudio SCADA, such as electrical or process parameters, with the purpose of guaranteeing the excellent efficiency of the installation's preventive maintenance tasks. The record log is drawn up as follows: The user must not configure any other option than the storage period to start the recording process, since when the devices are added to the software, PowerStudio SCADA automatically starts recording all electrical parameters Multi-position Software (Integrated Web Server) The internal software web server can be used by any user connected to the corporate network (LAN) or any Internet connection (if the Q3-27

28 PowerStudio SCADA Energy supervision, preventive maintenance of electric lines and installations and allocation of department or production process costs. Performance router used for the connection by the company, factory, etc. is connected. The relationship between the public IP and the private IP) to display the data log or in real time, which will be updated permanently. Screens are dynamic, so that the web client can display all data in real time, as in the case of the master server. the installation in each case. Force variables (Remote control) Execution of remote control functions on elements of the installation, forcing stops and start-ups of the said elements. Generation of reports and receipt simulator The number of web users that can connect to the server is unlimited; in the case of the connection, an access filter can be used, limiting the display of screens or with the remote control of the different field elements. Integrated XML and DDE server In addition, there are tools specialised in the exchange of dynamic data, for the integration of the energy supervision tasks within a global control system, which contains communications servers for the integration of DDE (local integration) and XML (relocated integration). Construction of customised screens PowerStudio SCADA can be used to create customised screens that emulate a production process. Therefore, we can fix the parameter or state display labels, which indicate the status of a specific point of the installation or state of a line. The number of screens implemented can be unlimited, so that we will can customise displays in sectors, displaying a specific point of This software has a very powerful module that can be used to generate reports and simulate receipts. It can be used to create billing calendars, programming the following: types of hour, types of day, billing calendars and calculation of costs. This module is used to design a summary report with any variable obtained and recorded by the software. It implements energy consumption in a determined period of time, summary of events or incidents in the grid. The reports can be customised in each case and mathematical functions can even be applied to the variables obtained, with the purpose of obtaining production ratios or to check the consumption of electrical bills issued. All in all, it is a highly versatile and easy to use software. In this case, Scada applications can be created without the need to have programming knowledge, since the user interface uses a vertical menu system. Q3-28

29 PowerStudio SCADA Energy supervision, preventive maintenance of electric lines and installations and allocation of department or production process costs. Additional information DYNAMIC EXCHANGE OF DATA PowerStudio Scada, is not only an excellent energy manager, but it also has a series of data exchange functions implemented, facilitating the quick and comfortable integration of the system with other market applications. To carry out the DDE integration tasks, PowerStudio Scada and the generic control application must be installed on the same platform (PC), with a local integration of all parameters requested. XML Integration DDE Integration In many cases, there are clients that not only need to know the CVM grid analyzer, CIR- WATT or protection equipment data, but also need to centralise the air-conditioning or other parameters from the equipment of different manufacturers. The handicap for integrators is the development of different communication drivers for all units connected. To this end, PowerStudio Scada uses a DDE server for the integration of the different units manufactured by CIRCUTOR, acting as a real time integration agent, for the different electrical or process parameters. The objective of the integration of DDE is to facilitate the integrator the indirect communication with units through PowerStudio Scada, with the purpose of assuring a quicker and simpler integration, thus ensuring that the integrator will not have to develop the communication driver for all metering peripherals. At times, integrators have various external applications that need the to read the data from the same peripheral device remotely. This is a big problem, since the units with RS-485 communications can only be queried by a single master. When there is more than one, there are collisions in the communications and no application receives the information correctly. The XML communications protocol solves this problem: the only requirement is that the IP address of the slave application or data server can be accessed. With this format, we can request any electrical or physical parameter of the PowerStudio Scada system in real time, integrating many different electrical or physical parameters in one or various PowerStudio Scada systems installed in the same network, even on accessible external grids (decentralised energy control systems). In other words, the communication between software, via LAN or the Internet. Q3-29

30 SGC4 Box Safe and compact water and energy consumption management system for campsites Description Integrated solution for remote management of campsite consumption via PLC (Power Line Communications). Its easy installation enables energy centralization and management from a compact cabinet. This equipment comprises four elements: Four single-phase CIRWATT B meters to meter and record the electrical energy consumed by each plot. One LM6I2O PLC impulse centralizer with PLC communications. It is in charge of collecting the pulses from the water meters. Four water meters to record the water consumption of each plot. Four electrovalves to cut the water supply. Application Remote meter reading and actuation system via PLC (Power Line Communications), using the existing electric power line for intelligent management of energy consumption. When the SGC4 cabinet is connected to the low-voltage network, it automatically sends electricity and water consumption information to the PLC 800 concentrator. It can also interact with the system remotely. Features Cirwatt B single-phase meter with PLC Nominal voltage Standards Communications Output LM6I2O PLC impulse centralizer Nominal voltage Communications Outputs Inputs Water meter with impulse probe Nominal pressure 230 V or 127 V Class B or 1 (Approval MID EN / EN or IEC (for active energy) and Class 2 for reactive energy (IEC )). PLC (Power Line Communications) Integrated cut-off relay 230 V or 127 V PLC, RS-485, RS-232 Two relay outputs for non-critical alarms Six meter inputs PN16 Campsite managers can remotely read the initial consumption of a meter assigned to a plot when a new customer arrives, and facilitate the electric and water supply (by triggering the electronic meter s internal relay). This avoids potential fraud by other customers connecting their loads to neighbouring camping plots. The water meters have impulse probes that are recorded by the LM6I2O PLC concentrator. Nominal flow rate 1.5 m³/h Connection wire G¾" Supply-cutting electrovalve Thread ½" Passage diameter 13 mm Coil voltage 220 V Upon the customer s departure, the main office automatically imputes the cost of the energy and water consumed during the stay at the campsite. Q3-30

31 SGC4 Box Safe and compact water and energy consumption management system for campsites Dimensions References Description Type Code Safe and compact water and energy consumption management system for campsites SGC4 Box Q30230 Advantages Centralization of water and electricity measurements. Remote opening and closing of water and electric supply. Manual opening and closing of the water supply. Easy load connection (Schuko IP 54 sockets). Nocturnal signs for display Management of customer arrivals and departures. Easy installation. Compact, centralized system. External LED signals. Q3-31

32 Q3-32 Current transformers for billing and accessories