Industrial / Commercial Surge Protection Catalog

Transcription

1 Industrial / Commercial Surge Protection Catalog Your one source for all Surge Protection Devices

2 Nipple Mount Surge Protectors 100,000 to 400,000 surge Amp capacity Panel mount devices can be installed directly on the main electrical panel or equipment disconnect. Devices range from 100,000 to 400,000 surge Amp capacity and are available in 4, 7 and 10 mode configurations. A variety of enclosures and diagnostic options are available including light-emitting diode (LED) visual indicators. VorCap Surge Protection Modules Next generation of surge suppression systems The ultimate in surge protection technology. Fail safe design ensures maximum protection in high surge probability locations. Even under catastrophic surge conditions, VorCap technology will take your equipment off line before a surge will. Available in a modular assembly or can be installed as a point source device. The Vor-Cap devices are U.L. Approved at U.L s maximum testing capacity (200,000Amps). Modular Surge Protection Panels - Pop-out field replaceable modules From 100,000 to 600,000 surge Amp capacity. Modules virtually eliminate down-time. 5, 7 and 10 mode configurations available with internal & external 200 kaic fused disconnects, red/green diagnostic LED s, audible alarm, digital surge counter, NEMA 4 & NEMA 4X stainless steel enclosures. All units come standard with pop out replaceable modules by mode. Point of use surge devices Equipment level surge protection devices Equipment level protection for AC/DC network cable, data and low voltage applications. Available in din-rail and direct inline installation. Modules can be mounted directly into equipment cabinets or can be custom configured in a variety of enclosures. 2 PSP Products Inc Phoenix Drive, Manassas, VA 20110

3 Surge Devices Typhoon 2000 Series UL 1449 Listed 4th Edition type 1 for installation on the service entrance or main electrical panel. Common mode suppression with 160,000 Surge Amp capacity and Light-emitting diode (LED) visual indicator for transfer switch protection status. Flush mount plate option available for finished walls. Typhoon ,000 or 200,000 Amps per phase, NEMA 4 enclosure, 65 & 200 kaic, LED s each phase, 7 mode protection, dry contacts, 10 year warranty. Also available in a NEMA 4X enclosure with internal/external fused disconnect and surge counter. Devices are UL th Edition and include UL 1283 listing. Typhoon ,000 Amps per phase, NEMA 4 enclosure, LED s each phase, 10 mode protection, dry contacts, push to test diagnostics, surge counter. Also available in a NEMA 4X enclosure with internal/external fused disconnect and surge counter. Typhoon ,000, 300,000, or 400,000 Amps per phase, NEMA 4 enclosure, 200 kaic, LED s each phase, dry contacts, audible alarm, Vor-Cap modules, 10 year warranty. OPTIONS: Fused disconnect, stainless steel, 4X enclosure. Vorcap Modules 100,000, 200,000, or 300,000 surge Amp capacity. Available as individual models, pre-assembled bar assemblies and Dinrail. This device is trusted by the oil and Telecom industries to protect their most critical equipment in vulnerable locations. Hurricane 1000 Series This LED Lighting Surge Protection Device is small enough to fit inside electrical fixture. All devices feature thermal protection which maximizes its efficiency and a LED indicator light that confirms protection is active. Hurricane 2000 Series Main panel, Sub Panel & Point of use Applications Up to 200 KAIC fault current rating. Status LED s audible alarm and dry contacts available 80,000 to 300,000 surge Amps in all single and three phase. Nema 01,04 & 04X Stainless enclosures. UL th Edition Type 1 Listed Common mode suppression. Hurricane 3000 Series The Hurricane 3000 Series provides a 200,000 KAIC fault current rating making it suitable for installation at the main service entrance and branch panels. This series is available in 100 ka, 200 ka and 300 ka models and is available in all WYE and Delta voltage configurations. Modular Hurricane 4000 The MS Series is a high-performance UL 1449 Listed Type 1 SPD designed for critical panels located in the harshest environments. The MS Series is available for all single & three phase configurations up to ac. Modular Hurricane ,000 to 600,000 Amps per phase, replaceable modules by mode. Available in NEMA 1, 4, 4X and stainless steel. Full diagnostics including red-green LED s, dry contacts, audible alarm, surge counter, internal/external fused disconnect. AC & DC Din-rail Mount Products 40, ,000 surge Amp capacity modules can be combined and configured for almost any requirement. Small footprint allows for internal mounting. Modules include visual end of life indicators and form C dry contacts for remote monitoring. Ethernet Cat 5 & POE Products 40,000 surge Amp capacity plug and play Ethernet protection. POE or standard configuration available for a broad range of surge protection applications. Designed to protect sensitive data-monitoring equipment from transient over voltages. Contact us: sales@pspproducts.com 3

4 Residential Surge Protection Typhoon 2000 Series Features UL th Edition listed Type 1 Device - 120/240 split phase - Whole House Surge Protector Common mode suppression with 160,000 Surge Amp Capacity Thermal fused metal oxide varistor (MOV) suppression technology Light-emitting diode (LED) visual indicator for transfer switch protection status NEMA 4 outdoor rated enclosure Available in maximum surge current capacity of 160kA Flush mount plate option available for finished walls Type 4 Enclosure suitable for transfer switches installed inside or outdoors Provides whole house surge protection Benefits Surge protection devices with extended operating temperature and the versatility of either a NEMA 1 indoor or NEMA 4 outdoor rated enclosure. The device provides robust protection for the whole home against damaging electrical surges and spikes. Basic Applications Residential Telecommunications Light commercial applications 4 PSP Products Inc Phoenix Drive, Manassas, VA 20110

5 Surge Protector Dimensions Optional Flush Mount Cover T1SP N Specifications Electrical Surge Protection Device (SPD) Type to UL Operating AC voltage Maximum continuous operating AC voltage (MCOV) Line-Neutral Line-Ground Neutral-Ground Line-Line Nominal discharge current [In] Maximum surge current capacity [I max ] Fault current rating (SCCR) Voltage protection rating (VPR) Suppression technology Line-Neutral Line-Ground Neutral-Ground Line-Line Line-Neutral Line-Ground Neutral-Ground Line-Line Type / 240 V 3W+G 140 V 140 V 280 V 80 ka 80 ka 80 ka 100 ka 10 ka without breaker; 200 ka with breaker 1000 V 1000 V MOV Mechanical Connection terminal (suppression) hardwired Operating temperature ( C) Enclosure type (Outdoor) Enclosure dimension (LxWxH) Weight #12 AWG pigtail leads -40º C - +80º C Type 4 PVC plastic 4.0 x 4.0 x 2.45 [ x x mm] 2.5 lbs [1.81 kg] Contact us: sales@pspproducts.com 5

6 Commercial Grade Surge Protection Typhoon 3000 T1AC150 / T1AC200 & T2AC150 / T2AC200 Series Features UL th Edition listed EMI/RFI filtering Thermally fused MOV s Common mode suppression Visual and remote verification of protection status Surge current capacity up to 200 ka 8/20μs AC Surge Supression Solutions T1A21SM Series Features UL th Edition listed Advanced SAD/MOV coordinated hybrid technology Thermally fused MOVs Common mode suppression Visual and remote verification of protection status Surge current capacity up to 200 ka 8/20μs Advanced Coordinated Hybrid Dimensions [22.86 ] 0.90 [ ] 5.64 [ ] 4.76 [57.15 ] 2.25 [ ] 6.73 Optional Flush Mount Plate Available 6 PSP Products Inc Phoenix Drive, Manassas, VA 20110

7 T1AC150 / T1AC200 & T2AC150 / T2AC200 Series T1A21SM AC Surge Supression Solutions Specifications Model Operating Voltage Surge Current Capacity Fault Current Rating Nominal Current (In) SPD Type MCOV Voltage Protection Rating (VPR) Enclosure Type TOAC200A-04-N* TOAC N 1Φ 120 2W+G 100kA L-N 100kA L-G 60kA N-G 200 Kaic Type V 140 V 140 V 1000 V Type 4 Aluminium T1AC150A-04-N* T1AC N 1Φ 120/240 3W+G 75kA L-N 75kA L-G 60kA N-G 75kA L-L 200 Kaic Type V 140 V 140 V 254 V 1000 V 1000 V Type 4 Aluminium T2AC150A-04-N* T2AC N 3Φ 208/120Y 4W+G 75kA L-N 75kA L-G 60kA N-G 75kA L-L 200 Kaic Type V 140 V 140 V 220 V 1000 V 1000 V Type 4 Aluminium T1AC200A-04-N* T1AC N 1Φ 120/240 3W+G 100kA L-N 100kA L-G 60kA N-G 100kA L-L 200 Kaic Type V 180 V 180 V 280 V 1200 V 700 V 1200 V Type 4 Aluminium T2AC200A-04-N* T2AC N 3Φ 208/120Y 4W+G 100kA L-N 100kA L-G 60kA N-G 100kA L-L 200 Kaic Type V 180 V 180 V 280 V 1000 V 700 V 1200 V Type 4 Aluminium T1AC21SM200A-04-N* 1Φ 120/240 3W+G 100kA L-N 100kA L-G 60kA N-G 100kA L-L 200 Kaic Type V 140 V 140 V 280 V 500 V 800 V 700 V Type 4 Aluminium * Denotes model numbers with form C N/O N/C Dry Contacts Operating Temperature to +80 C Form C Contact Connection - Hardwire (w/22 AWG wires) Suppression Connection - Hardwire (w/10 AWG wires) GS-07F-0435V Certified to ISO 9001: Contact us: sales@pspproducts.com 7

8 Commercial Grade Surge Protection Typhoon 4000 Overview The PSP Vortexx AMV Series features All-Mode AC surge suppression solutions with sine wave tracking circuitry for EMI/RFI filtering. Available in a variety of service voltage configurations, the AMV Series is the ideal choice when applications require all-mode suppression and filtering capabilities. True 10 Mode Device on 3 phase products PSP Vortexx AMV Series The AMV Series utilizes metal oxide varistors (MOVs) to protect your sensitive electronic equipment from the devastating effects of transient voltage surges. Each phase includes an LED status indicator to show protection status. LED on indicates suppressor is functional. LED off indicates suppressor or AC power failure. Form C contacts are standard. Features UL th Edition listed UL 1283 listed Form C relay contacts included Push-to-test diagnostics EMI/ RFI filtering sine wave tracking circuitry Individual thermal fusing and MOV components Fused disconnect option 10 Year Warranty Max Surge Current/Phase - 300,000 Amps/Phase Operating Temperature: -40º C to +80 C Form C Contact Connection: Terminal Block (#18-#22 AWG wires) Suppression Connection - Hardwire (pigtail wires, #10 AWG), 18 minimum (other lenghts available) Sine wave tracking circuitry Dimensions ø T1AM N* - T1EAM N* 8 PSP Products Inc Phoenix Drive, Manassas, VA 20110

9 All-Mode V Series AC Power Surge Supression Model Operating Voltage Surge Current Capacity Fault Current Rating Nominal Current (In) SPD Type MCOV Voltage Protection Rating (VPR) Enclosure Type T1AM N* 1Φ 120/240 3W+G 100kA L-N 100kA L-G 100kA N-G 100kA L-L 200kA with 30Amp Breaker 20kA Type 2 140V 140V 140V 280V 600V 600V 600V 900V Type 4 Steel T1EAM N* 1Φ 127/220 3W+G 100kA L-N 100kA L-G 100kA N-G 100kA L-L 200kA with 30Amp Breaker 20kA Type 2 175V 175V 175V 320V 700V 700V 700V 1000V Type 4 Steel T2AM N* 3Φ 208/120Y 4W+G 100kA L-N 100kA L-G 100kA N-G 100kA L-L 200kA with 30Amp Breaker 20kA Type 2 140V 140V 140V 280V 600V 700V 700V 800V Type 4 Steel T2EAM N* 3Φ 220/127Y 4W+G 100kA L-N 100kA L-G 100kA N-G 100kA L-L 200kA with 30Amp Breaker 20kA Type 2 175V 175V 175V 320V 700V 700V 700V 1000V Type 4 Steel T3AM N* 3Φ 240/120D 4W+G High Leg Delta 100kA L-N 100kA L-G 100kA N-G 100kA L-L 100kA HL-N 100kA HL-G 100kA HL-L 200kA with 30Amp Breaker 20kA Type 2 140V 140V 140V 280V 280V 280V 280V 900V 900V 800V 1200V 1000V 1200V 1000V Type 4 Steel T4AM N* 3Φ 480/277Y 4W+G 100kA L-N 100kA L-G 100kA N-G 100kA L-L 200kA with 30Amp Breaker 20kA Type 2 320V 320V 320V 560V 1500V 1500V 1800V 1200V Type 4 Steel T4AM300-3WG-04-N* 3Φ 480/277Y 3W+G 100kA L-N 100kA L-G 100kA N-G 100kA L-L 200kA with 30Amp Breaker 20kA Type 2 320V 560V 1500V 1200V Type 4 Steel GS-07F-0435V Certified to ISO 9001: Contact us: sales@pspproducts.com 9

10 Industrial Grade Surge Protection Typhoon 5000 Overview The next generation of Surge Suppression systems The Vor-Cap surge suppression module is used either as a stand alone protection element integrated inside larger systems or within PSP transient voltage surge suppressor systems. It incorporates a single, heavy duty, distribution grade metal oxide varistor (MOV) disk, assembled under pressure in an environmentally sealed aluminum casing. Vor-Cap s unique design provides very low internal contact resistance, excellent thermal management of the MOV and uniform distribution of the surge current over the total area of the protection element, thus resulting in an extremely high energy handling capability combined with very low let-through voltages. Vor-Cap s patented design minimizes the effects of aging and completely eliminates the risk of catastrophic failure, explosion or fire, which are more common in conventional surge protection devices. Vor-Cap incorporates state-of-the-art MOV technology developments, providing superior protection characteristics that remain unchanged throughout its long service life. The module has been designed in order to withstand repeated surges, providing a cost effective and maintenance free operation in harsh environments. Vor-Cap is the only UL th Edition recognized surge protection module in the industry rated for safe operation without the use of additional internal fuses. This unique feature combined with its capability to be directly connected to the power lines or bus bars (inline connection), makes it the most reliable surge protection device known and insures that critical electronic equipment will remain protected at all times. Independent test data confirms that a 40 mm Vor-Cap module can withstand 100 ka strikes with 0% change in clamping voltage. The 80 mm Vor-Cap module can withstand strikes up to 200 ka, safeguarding critical electronic infrastructure against any potential threat. Model (Series) T-1 T-2 T-3 T-4 T-5 T-6 T-7 T-8 T-9 Nominal Line Voltage 120/ / / / D 347/ D 220/ D MCOV 150 V 150 V 300/150 V 350 V 480 V 750 V 250 V 250 V Voltage Protection Rating (VPR) Per UL1449, 4th Ed. 900/ 1200 V 1800 V 1500 V 2000 V 900 V 900 V Let Through Voltage Level for Surge Current 10kA (8/20) (IEEE C ) 405 V 405 V 800/405 V 930 V 1650 V 1260/2100V 2100 V 800/1260V 800 V 10 PSP Products Inc Phoenix Drive, Manassas, VA 20110

11 Operating Frequency 0 to 500 Hz Operating Temperature -40 TO +185 F (-40 TO +85C) EMI/RFI Noise Rejection Up to -50 db all models Fault Current Tested 22 ka / 200 ka Duration Performance: 1 ka square waveform 2 msec (IEEE C62.11) 250 hits 500 A square waveform 2 msec (IEEE C62.11) 250 hits Audible Alarm Yes Remote Signaling Form C dry contacts Response Time Product < 1 nanosecond Lifetime warranty 40 MM Module Internal Rail Mount Assembly Max. Surge Current/ Phase 3 Models 100,000 amps/phase 300,000 amps/phase 400,000 amps/phase Enclosure Rating NEMA 4 - IP65 Surge Counter Yes Connection Terminals #6-#4/0 AWG Weight 100,000 amps/phase = 50 lbs. 300,000 amps/phase = 60 lbs. 400,000 amps/phase = 70 lbs. Diagnostics Red and green LED s, push to test buttons, dry contacts, audible alarm and alarm silence button Options Safety Features Fused safety disconnect 80 MM Modules with Optional External Disconnect Optional Housings Stainless steel housing / NEMA 4X housing available Contact us: sales@pspproducts.com 11

12 The next generation surge supression module Vor-Cap OEM Surge Suppressor Large Thermal Capacity Electrodes No field to burn Strong Aluminium Housing Low Dynamic Resistance & Low residual Voltage Single, Distribution-Grade Varistor - No Pounds of pressure Product Information Vor-Cap 40 Electrical Characteristics Nominal operating voltage, Vn 120 V 240 V 277 V 400 V Maximum continous operating voltage 150 V 300 V 350 V 480 V Vref 5mA AC (peak) 263 V 526 V 607 V 833 V 5mA DC 252 V 506 V 587 V 812 V Operating frequency range Hz Hz Hz Hz Leakage current at Vn 0.30 ma 0.35 ma 0.40 ma 0.45 ma Surge Protection Levels Voltage protection rating (VPR) per UL th Edition 1200 V 1200 V 1800 V Response time <1ns <1ns <1ns <1ns Maximum surge current Maximum surge current, [I max ] (8/20) NEMA LS ka 140 ka 140 ka 140 ka Maximum lightning current, limp (10/350) IEC ka 7.5 ka 7.5 ka 7.5 ka Let Through Voltage Level for surge current 10 ka* (8/20) (IEEE C ) 435 V 895 V 1025 V 1355 V Long Duration Surge Performance 1 ka square waveform 2 msec (IEEE C62.11) 500 A square waveform 2 msec (IEEE C62.11) 250 hits 250 hits 250 hits 250 hits Short Circuit Current Rating (UL th Edition) 200 ka Environmental Properties Operating Temperature ( C) Environmental protection IP65 IP65 IP65 IP65 Mechanical Properties Diameter inch (mm) 2.5 (63.5) 2.5 (63.5) 2.5 (63.5) 2.5 (63.5) Height inch (mm) 3.73 (94.6) 3.73 (94.6) 3.73 (94.6) 3.73 (94.6) Weight lb (gr) 1.33 (604) 1.33 (604) 1.33 (604) 1.33 (604) Standards compliance Listings IEEE C62.41, IEEE C62.45, IEEE C62.11, NEMA LS-1 IEC ed. 2:2205, EN A11:2005, IEC UL th Edition CE, VDE 12 PSP Products Inc Phoenix Drive, Manassas, VA 20110

13 Product Information Vor-Cap 80 Electrical Characteristics Nominal operating voltage, Vn 120 V 240 V 277 V 400 V 480 V Maximum continous operating voltage Vref 5 ma AC (peak) 5 ma DC Operating frequency range Leakage current at Vn 150 V 300 V 350 V 480 V 750 V 263 V 526 V 607 V 833 V 1100 V 1350 V 250 V 504 V 582 V 802 V 1050 V 1300 V Hz Hz Hz Hz Hz Hz 0.80 ma 0.85 ma 0.90 ma 0.95 ma 1.3 ma 1.4 ma Surge Protection Levels Voltage protection rating (VPR) per UL th Edition 900 V 1200 V 1500 V 1800 V 2000 V Response time <1ns <1ns <1ns <1ns <1ns <1ns Maximum surge current Maximum surge current, [I max ] (8/20) NEMA LS ka 250 ka 250 ka 250 ka 250 ka 250 ka Maximum lightning current, limp (10/350) IEC ka 25 ka 25 ka 25 ka 25 ka 25 ka Let Through Voltage Level for surge current 10kA* (8/20) (IEEE C ) 405 V 800 V 930 V 1260 V 1650 V 2100 V Long Duration Surge Performance 1 ka square waveform 2 msec (IEEE C62.11) 250 hits 250 hits 250 hits 250 hits 250 hits 250 hits 500 A square waveform 2 msec (IEEE C62.11) Short Circuit Current Rating (UL th Edition) 200kA Environmental Properties Operating Temperature ( C) Environmental protection IP65 IP65 IP65 IP65 IP65 IP65 Mechanical Properties Diameter inch (mm) 4.25 (107.9) 4.25 (107.9) 4.25 (107.9) 4.25 (107.9) 4.25 (107.9) 4.25 (107.9) Height inch (mm) 3.73 (94.6) 3.73 (94.6) 3.73 (94.6) 3.73 (94.6) 3.73 (94.6) 3.73 (94.6) Weight lb (gr) 3.31 (1500) 3.40 (1500) 3.41 (1500) 3.35 (1500) 3.38 (1500) 3.40 (1500) Standards compliance IEEE C62.41, IEEE C62.45, IEEE C62.11, NEMA LS-1 IEC ed. 2:2205, EN A11:2005, IEC Listings UL th Edition CE, VDE Contact us: sales@pspproducts.com 13

14 Type 1 Surge Protector with MOV and Dual Gas Tube Technology Hurricane 1000 Series Features L1 L2 Small footprint, nipple or bracket installation 75 ka [I max ] surge capacity TC01 TC02 Thermally protected MOV with dual gas tube technology UL th Edition In 10 ka Type 4X indoor/outdoor enclosure Light emitting diode (LED) diagnostic indicator GDT1 LED MOV1 Tiger MOV2 GDT2 Lifetime warranty Specifications G UL listed as surge protection device type Operating voltage Maximum continuous voltage (MCOV) Nominal discharge current [I n ] Maximum surge capacity [I max ] Voltage protection rating (VPR) Suppression technology Operating temperature ( C) Connection terminals Standards Type 1 120/240 & 120 VAC single phase 150 line-ground; 300 line-line 10 ka 75 ka olts line-ground Thermally protected MOV with dual gas tube -40º C to +80º C Hardwire AWG pigtail leads UL th Edition, IEEE IP65, IEEE C62.41 Dimensions Green Black Black Locknut Optional bracket Enclosure PSP Products Inc Phoenix Drive, Manassas, VA 20110

15 LED Lightning Single Pole Surge Protectors Hurricane 1000 Series SD05C/SD10C Series Features UL 1449 Type 4 CA and IEC/EN T2 standards With thermal protection One port and two port optional Two port SPD can disconnect the power line when abnormal situation happens Failure indication optional [I n ]: 5kA, 10kA [I max ]: 10kA, 15kA, 25kA GDT for common mode optional Rated voltage: 120V, 277V, 347V, 480V 14 AWG wire, lower clamping voltage IP 66 Agency Approvals: UL, cul, UL EU, DEMKO, CE, CB L N L in N in L in L out N out L out N in N out G G Parallel Series Devices Series Devices SD05K Series Features Design for UL 1449 Type 4 CA With thermal protection Two port product apply to waterproof connector Failure indication or signal indication or none [I n ]: 5 ka [I max ]: 10kA One port and two port optional Rated operating voltage: 120V, 277V, 347V, 480V GDT for common mode optional IP 66 L in N in L N L out N out G Series Devices G Parallel Contact us: sales@pspproducts.com 15

16 Surge Protection Device for Outdor LED Lightning Installations 7 Pin Connector Surge Protection Grounding Pin built-in 7 pin connector ø 80*40 mm Plug-In Surge Protector 7 Pin Connector with Plug-In SPD Features New patented 7 pin connector with ground connection and plug-in surge protection Surge protection for LED Outdoor Lighting Installations Plug-in Surge Protection Device attaches perfectly to the 7 pin Connector for maximum protection against transients and over voltages Comply with UL 1449, ANSI C , ANSI C136.41, ANSI C All-mode protection (L-N, L-G, N-G) Unique grounding design In 10kA, Imax 15kA, 20kA Series Connection can be customized Installation Instructions Photocontrol N N Li Li Lo Lo Plug-In Surge Protector SPD Receptacle N N G G Li Li Lo Lo Schematics N G Li Lo N LI Lo L N G CB Outdoor Lightning N G LI Lo GDT TCO MOV 16 PSP Products Inc Phoenix Drive, Manassas, VA 20110

17 Surge Protection Device for Outdor LED Lightning Installations 7 Pin Connector Surge Protection Receptacle with SPD New Patented 7 pin connector with built-in surge protection for outdoor LED lighting installations Series and Parallel connections optional Provides Surge Protection for LED lighting All-mode protection (L-N, L-G, N-G) Unique grounding design ø 80*60 mm In 10kA, Imax 15kA, 20kA Comply with UL 1449, ANSI C , ANSI C136.41, ANSI C Retro-fit Plug-in SPD for 3/5/7 Pin Connector New patented plug-in surge protection device with ground connection Provides surge protection for LED Outdoor Lighting Installations Plug-in Surge Protection Device perfectly attaches to 7 pin Connector for maximum protection against transients and over voltages Comply with UL 1449, ANSI C , ANSI C136.41, ANSI C All-mode protection (L-N, L-G, N-G) Unique grounding design In 10kA, Imax 15kA, 20kA Series and Parallel connections optional Schematics N LI Lo ø 80*40 mm Grounding Wire Connected to Lighting Enclosure G N LI Lo Contact us: sales@pspproducts.com 17

18 Type 1 Surge Protector with MOV and Gas Tube Technology Hurricane 2000 Series Nipple mount with LED and audible alarm Side mount option Back mount option Features Imax 100kA 8/20 µs UL th Edition Type 1 Listed Common mode suppression Thermal fused metal oxide varistor (MOV) suppression with in series Gas-Tube technology for maximum surge protection and zero leakage Light emitting diode s (LED) visual protection status indicator Real time diagnostics by LED per phase and audible alarm Available in maximum surge current capacity of 100,000 surge Amps Indoor/Outdoor IP66 NEMA 6 rated enclosure (NEMA 6 exceeds NEMA 4 or 4X) In (All models) SCCR 200 ka (All models) Meets requirements of UL 96A Lighting Protection Master Label Available in a variety of voltages ranging from 120 to 600 volts AC in Hardwired connection #12 AWG 36 leads Audible Alarm protection status indicator Lifetime free replacement warranty Dimensions Version A Version B M22 M in 4.02 in 0.61 in 0.61 in 3.46 in 2.35 in 3.46 in 2.35 in *NPT 1 / 2 adaptor available in both versions 18 PSP Products Inc Phoenix Drive, Manassas, VA 20110

19 Specifications Description HC2C N HC1C N HCSC N HC4C N HC5C N System voltage System 4W+G (Wye) 3W+G (Split phase) 2W+G (Single) 4W+G (Wye) 3W+G (Delta) Maximum operating voltage L - G L - N / N - G / L - L / Operating current Ic ma 25 per line Follow current If A None Short circuit current rating SCCR ka 200 Maximum Leakage current Ipe ma None Maximum recommended fuse Rating type 200 A, Class J Frequency F Hz Nominal discharge current In (8-20) ka 20 Maximum discharge current ka L - G 100 Total maximal discharge current total (8-20) ka 100 Total maximal discharge current total (10-350) ka Voltage protection level L - N N / A L - L N / A Shipping dimensions Inches 8 x 3.75 x 4.25 Shipping weight Standard s compliance or recongn Visual indicator Sound Disconnection Indicator Wiring type Maximum Altitude Operating Temperature Housing enclosure material Mounting type Environmental rating Nema rating Location installation Lbs UL 1449 ed4 file: E32628 IEC ed2 ft F IP 2.4 Type 1 Type 1 LED Continous buzzer AWG 12 wires to +185 Aluminum cast Side or back nipple (Version A or B) Threaded (M22) NPT 1/2 adaptor available IP66 NEMA 6 Indoor / Outdoor Contact us: sales@pspproducts.com 19

20 Commercial Grade Surge Protection Hurricane 3000 Series NEMA 4 Nipple Mount Flush/Surface Mount NEMA 4X Hardwired with Fused Disconnect & Surge Counter Overview The Hurricane 3000 Series Surge Suppression device is the culmination of years of technological research and innovation. The Hurricane 3000 provides state of the art protection in 100, 200 and 300 ka/phase configurations. Adaptable to many different voltages and Delta and WYE configurations, the Hurricane 3000 is suitable for almost any TVSS need or environment. The Hurricane 3000 provides protection in all modes, L-N, L-G, N-G AND L-L plus noise filtration up to -50dB. Its robust yet compact NEMA 4 metal enclosure is suitable for both indoor and outdoor installations. Utilizing high-energy MOVs and EMI/RFI filtering, the Hurricane 3000 will protect against transients originating from induced lightning strikes, utility switching or internal motor operation. The Hurricane 3000 s internal SCCR (Short Circuit Current Rating) of 200 ka makes it capable of being installed in both service and branch panel applications without the need for cumbersome inline fusing. Features UL th Edition listed cul listed Multiple International Listings 4 Levels of Protection LED Status Indicators Audible Alarm NO/NC Dry Contacts NEMA 4 - (Nipple Product) NEMA 4X (option) Noise Filtration Sine Wave Tracking Circuitry 200 kaic Fault Current Rated Surge Counter (option) Integral Fused Disconnect (option) 10 Year Warranty Model (Series) H1C H2C H3C H4C H5C H6C H7C H8C H9C Nominal Line Voltage 120/ / / / D 347/ D 220/ D MCOV 150 V 150 V 300/150 V 350 V 480 V 750 V 250 V 300 V Voltage Protection Rating (VPR) Per UL 1449, 4th Ed. 600/900 V 900/ 1200 V 1800 V 1500 V 2000 V 900 V 900 V Let Through Voltage Level for Surge Current 10 ka (8/20) (IEEE C ) 405 V 405 V 800/405 V 930 V 1650 V 1260 V 2100 V 800 V 800 V 20 PSP Products Inc Phoenix Drive, Manassas, VA 20110

21 Operating Frequency Operating Temperature EMI/RFI Noise Rejection 50 / 60 / 400 HZ -40 TO +185 F (-10 TO +85 C) Up to -50dB all models NEMA 4 Nipple Fault Current Fusing Pulse Life 200,000 kaic fusing/mode 5,000 CAT C3 surges without drift 8.0 [203] SINE Wave Tracking Compliant UL 1283 Yes Protection Modes Audible Alarm L-N, L-G, N-G, L-L Yes 6.0 [152] 3.5 [89] Remote Signaling Nipple Product Wire Size Form C dry contacts #10 AWG, 24 leads NEMA 4X Disconnect Response Time < 5 nanoseconds Product Warranty Max. Surge Current/ Phase L-N, L-G, N-G, L-L 10 years 3 models 100,000 amps/phase - 50,000 amps/mode 200,000 amps/phase - 100,000 amps/mode 300,000 amps/phase - 150,000 amps/mode 15.7 [400] Options 11.8 [300] 6.6 [157] Safety Features Fused safety disconnect NEMA 1 - Surface Mount/Flush Mount Enclosure Rating Nipple product; NEMA 4. Hardwire; NEMA 4X/NEMA [203] 14.0 [356] Surge Counter Optional on all models Connection Weight Diagnostics #10 AWG wires NEMA 4 - Terminals #10- NEMA 4 = 4 lbs; NEMA 4X Hardwired w/o disconnect = 15 lbs NEMA 4X Hardwired w/disconnect = 16 lbs Flush mount 15 lbs Green status LED s per phase with audible alarm & dry contacts 16.0 [406] 3.5 [89] 12.0 [305] 18.0 [457] Additional Enclosures Stainless steel, flush mount, NEMA 1 *Drawing not to scale Contact us: sales@pspproducts.com 21

22 Industrial Grade Surge Protection Hurricane 4000 Series Features Listed UL Type 1 Surge Protective Device Imax 300/400 ka per phase UL th Edition Smart Diagnostic Indicating Remaining Surge Capacity Protects All Modes Optional UL 1283 Electromagnetic Interference Filter Optional Surge Counter All Environmental Ratings Available In 20kA (All models and all modes) SCCR 200kA (All models) VPR L-N is 700V for 120V, 120/240V, 120/208V Real-Time LED indicators, Audible Alarm, Remote Contacts Overview The Hurricane 4000 Series is a high-performance UL 1449 Listed Type 1 SPD designed for critical panels located in the harshest environments. The Surge Protective Device (SPD) achieves the highest UL performance ratings for the Nominal Discharge Current (In) and High Current (SCCR) tests while providing a low Voltage Protection Rating (VPR). It is ideally suited for all NEC compliant locations including a UL96A Master Label Lighting Protection System and thus can be deployed with complete confidence. In addition to its rugged performance, the Hurricane 4000 Series has a new Smart-Diagnostic system that includes a multi-stage LED to indicate the exact level of protection present per phase, an audible alarm, remote signal contacts and an optional surge counter. The Hurricane 4000 Series is available for all single & three phase configurations up to 600Vac and is housed in a NEMA 4/12 rated metal enclosure or NEMA 4X stainless steel option. Electric Diagram Dimensions in mm (millimeters) L1 L2 L3 N tº tº tº V: High energy varistor tº: Thermally Protected tº tº tº tº PSP Products Inc Phoenix Drive, Manassas, VA 20110

23 Technical Data Description HC1CXX HC2CXX HC3CXX HC4CXX HC5CXX HC6CXX HC8CXX HC9CXX HC10CXX System voltage System Maximum Operating Voltage MCOV (V) L-G L-N N-G 120/240 Vac Split 2Ph+N+G 120/208 Vac Wye 3Ph+N+G 120/120 /240 Vac Hi-Leg D 3Ph+N+G 277/480Vac Wye 3Ph+N+G 480 Vac Delta 3Ph+G 347/600 Vac Wye 3Ph+N+G 240/415 Vac Wye 3Ph+N+G 240 Vac Delta 3Ph+G 320/580 Vac Hi-Leg D 3Ph+N+G / / / / L-L / /1000 Operating Current Ic ma <10 ma <10 ma <30 ma <10 ma <30 ma <10 ma <10 ma <30 ma <30 ma Follow Current If A NONE Maximum Leakage Current Ipe ma 1 ma Max. Recommended fuse if any Rating, Type 200 A Frequency f Hz 50 / 60 Hz Nominal discharge current per mode In (8/20) ka Maximum Discharge Current per phase Imax (8/) 300/400 ka Impulse Discharge Current per phase Iimp (10/350) ka 12.5 ka Total Maximal Discharge Current Itotal (8/20) ka 440 ka Total Maximal Discharge Current Itotal (10/350) ka 38 ka Let through Voltage Ures(V) at 20kA L-G L-N N-G L-L Voltage Protection Rating VPR (V) L-G L-N N-G L-L Short Circuit Current Rating SCCR ka 200 Standard s Compliance or recognition RFI Filtering Thermal disconnector Overload disconnector Failure indicators UL 1449 ed.4 UL Type 1 Listed SPD Optional UL 1283 Electromagnetic Interference Filter Internal to each component Internal to each surge protector LED, audible alarm and remote signaling Operating Temperature Housing Enclosure material Mounting type Environmental rating Nema Location Installation ºF IP º F (-40/+85º C) Steel or Stainless Steel Options Wall Mounting by screws (not included) IP 66, IP 65 NEMA 4, NEMA 4X, NEMA 12 Indoor/Outdoor Contact us: sales@pspproducts.com 23

24 Industrial Grade Surge Protection Hurricane 5000 Features UL th Edition Listed cul Listed LED Status Indicators Audible Alarm Push to Test NO/NC Dry Contacts NEMA 4 & Nema 4X Enclosure Noise Filtering Sine Wave Tracking Circuitry Fused Safety Disconnect Switch (Option) Available in 4-7 & 10 Mode Design Heavy Duty Modular Construction Individual Modules Replaceable by Mode Digital Surge Counter 10 Year Warranty Overview The Hurricane 5000 Series Surge Suppressors provide high risk surge suppression capability at your facility s service entrance for both conducted (10/350 μs) and induced (8/20 μs) transient over voltages originating from such sources as lightning strikes and utility switching. These protectors incorporate reliable high intensity replaceable modules (per mode) with individually monitored and fused MOVs. Designed to various national and international standards, the Hurricane 5000 Series products are ideal as a global protection solution. The Hurricane 5000 Series products come in 4 models, 100,000 amp, 200,000 amp, 400,000 amp and 600,000 amp, and are versatile and scaleable to meet an array of engineering designs. The Hurricane 5000 Series products are housed in a NEMA 4 enclosure and they come standard with a 200 kaic rating to meet the most demanding needs. Noise filtration up to -50 db is incorporated providing protection in all modes and is available with or without a fused disconnect to meet all applications. Mode level field replaceable modules available in 4, 7 and 10 mode configurations. Eliminate down time and keep equipment protected. Model (Series) H1C H2C H3C H4C H5C H6C H7C H8C H9C Nominal Line Voltage 120/ / / / D 347/ D 220/ D MCOV 150 V 150V 300/150 V 350 V 480 V 750 V 250 V 250 V Voltage Protection Rating (VPR) Per UL 1449, 4th Ed. 600V 900/ 1200 V 1800 V 1500 V 2000 V 900 V 900 V Nominal Discharge Current [I n ]: 8/20 Max. Discharge Current [I max ] 100 ka 200 ka 400 ka 600 ka 24 PSP Products Inc Phoenix Drive, Manassas, VA 20110

25 Operating Frequency 50/60/400 HZ Operating Temperature EMI/RFI Noise Rejection -40 to +160 F (-10 to +70 C) Up to -50dB all models 100, ,000 and 300,000 surge Amp product with or without disconnect Fault Current Fusing 200,000 kaic A B C N Pulse Life SINE Wave Tracking 5,000 CAT C3 Surges without Drift Yes 15.7 [400] UL 1283 Compliant 11.8 [300] 7.1 [180] Protection Modes L-N, L-G, N-G, L-L (where applicable) Audible Alarm Remote Signaling Yes Form C Dry Contacts 400,000 and 600,000 surge Amp product with or without disconnect Field Nipple Product Wire Size Response Time Product Warranty #10 AWG, 24 leads < 5 nanoseconds 10 years A B C N ] Max. Surge Current/ Phase 5 models L-N, L-G, N-G, L-L 100,000 amps/phase - 50,000 amps/mode 200,000 amps/phase - 100,000 amps/mode 400,000 amps/phase - 200,000 amps/mode 600,000 amps/phase - 300,000 amps/mode 15.7 [400] 7.3 [185] Connection Terminals #10-#2 AWG Field Replaceable by Modules. No Tools Required, No Wires to Disconnect Weight 100,000 amps/phase = 25 lbs. 200,000 amps/phase = 26 lbs. 400,000 amps/phase = 28 lbs. 600,000 amps/phase = 38 lbs. Enclosure Ratings NEMA 4 and 4X Version Surge Counter Yes Diagnostics Options Red-Green LED s, Dry Contacts, Audible Alarm, and Push to Test Nema 4X Enclosure - Fused Internal & External Safety Disconnect *Drawings not to scale Contact us: sales@pspproducts.com 25

26 Low Voltage Surge Protectors Din-Rail & In-Line A.C & D.C Surge Protection Devices Din Rail AC Power Surge Protector Available from 40,000 to 200,000 surge amp capacity. Dry contacts and visual indicators available as well as noise filtration assemblies. The DS70RS is a one pole module that can be configured for both common and differential mode protection in any single and three phase applications to 600V AC. Din Rail DC Power Surge Protector The DS2x0-xxDC surge protector is designed to protect equipment connected to a DC power supply (or AC) against lightning surges. These devices are based on high energy varistors (MOV) matched with the DC operating voltage (from 12 to 350 Vdc). Din Rail Plug-in Surge Protectors for Telecom 2 and 4 pair Series Din Rail Surge Protection for Telephone ADSL/SDSL- SHDSL, ISDN, Fipway, Fieldbus-H2, 4-20mA, RS232 & RS485, MIC/T2 10 BaseT Products. Available from 6 to 150 DC voltage. 20,000 surge amp capacity. Pop out field replaceable modules. CCTV & Cable Protection The P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular, GPS and CATV equipment against lightning surges and electrical transients. With patented gas tube and waterproof. 1, 2 and 4-Pair DC Signal Line Surge Protectors MJ8-MJ6 Series Surge Protectors B180/480 series are wall mount DC signal line surge protectors designed to protect your sensitive telephone, data com and instrumentation equipment against harmful lightning surges and electrical transients. Maximum line current is 300 ma. The MJ8 and MJ6-1T Series is designed to protect sensitive data-monitoring equipment connected to various network protocols from transient over voltages. The transient protection circuit is based on high energy gas discharge tubes (GDT). DS50PV Series Photovoltaic Surge Protectors Photovoltaic Surge Protectors 500 to 1000 Volts DC with 40,000 Amps Imax. Type 1 UL 1CA DC SPD with High Energy MOV s, Imax 40 ka modular design with UL th edition listing. Modular design for ease of maintenance. Ship Board Surge Strip Z6-6 SP Z6-6 (2P) Surge Stopper United States Navy Shipboard Surge and Noise Suppressor. The PSP Products Model Z6-6 (2P) surge suppressor has been specifically engineered and designed for shipboard use. It is approved for U.S. Navy shipboard use. 26 PSP Products Inc Phoenix Drive, Manassas, VA 20110

27 Din-Rail AC Power Surge Protector DS2x0-xxDC Series - DS7xRS-120, DS7xRS-230, DS7xRS-400, DS7xRS-600 Overview DS70RS is a heavy duty AC Surge Protection Device (SPD) for high risk electrical service entrance and branch panel applications. The DS70RS protects against the direct and indirect lightning strikes and large switching transients. They are particularly useful in areas where space is limited. The DS70RS is a one pole module that can be configured for both common and differential mode protection in any single and three phase applications to ac. The DS70RS has a 70 ka 8/20us surge current rating, low leakage current to ground, no follow current and a low residual clamp voltage. The DS70RS module is din rail mountable with cage terminal connectors for parallel wiring. The DS70RS Series include an integral thermal disconnection compliant to UL-60691, a visual fault indicator, protection redundancy, replaceable modules as well as remote signalization. PSP Part Number DS7xRS-120 D S7xRS-230 DS7xRS-400 DS7xRS-600 AC Network UL Max. Operating Voltage (MCOV) 120/208 V 120/240 V 150 Vac 230/400 V 277/480 V 275 Vac 277/480 V 347/ 420 Vac 480 V 840 Vac TOV Withstand (UT) 150 Vac 275 Vac 420 Vac 840 Vac IEC/UL Nominal Discharge Current [I n ] 150 Vac 275 Vac 420 Vac 840 Vac Max. Discharge Current [I max ] 70 ka 70 ka 70 ka 70 ka Max. Lightning Current (limp) UL Voltage Protection Rating (VPR) 900 V 1500 V 2500 V Protection Level at In (Up) 1.0 kv 1.4 kv 1.8k V 2.5 k V UL Short-Circuit Current Rating (SCCR) 100 kaic 100 kaic 100 kaic 100 kaic Leakage Current at MCOV (lc) <1 ma <1 ma <1 ma <1 ma Connection Mode Follow Current (lf) AC System Thermal Disconnector Overcurrent Protection Dimensions Connection Remote Signal Indicator Mounting Operating Temperature (ºC) Operating Altitude Relative Humidity Enclosure Material Environmental Rating Weight L-N, L-G, N-G, L-L (where applicable) None IT, TT, TN, Single, Split Phase, Delta, Wye UL Time Delay - 125A Max. 90 x 18 x 67 (in mm) By screw terminals, #4 AWG Max. 250 Vac Max, 2A Din Rail, 35 mm Symmetrical -50 C to +85 C 13,000 ft (4,000m) 5 to 95% non-condensing, up to 100% external Thermoplastic UL94-5A IP oz per module Contact us: sales@pspproducts.com 27

28 Din-Rail DC Power Surge Protector DS2x0-xxDC Series Din Rail DC Power Surge Protector Overview The DS2x0-xxDC surge protector is designed to protect equipment connected to a DC power supply (or AC) against lightning surges. These devices are based on high energy varistors (MOV) matched with the DC operating voltage (from 12 to 350 Vdc). The MOV are equipped with internal thermal disconnectors in order to provide safe end of life. The indication of the disconnection status is provided by a mechanical indicator and is transmitted through a remote signal mechanism. The pluggable module allows an easy and fast maintenance. The DS2x0-xxDC is DIN rail compatible and is connected in parallel on the DC line to be protected. PSP Part Number DS220S-12DC DS220S-24DC DS230S-48DC DS240S-75DC DS240S-95DC Network voltage (Un) 12 Vdc 24 Vdc 48 Vdc 75 Vdc 95 Vdc Max. Operating Voltage (Uc) 24 Vdc 38 Vdc 65 Vdc 100 Vdc 125 Vdc Nominal discharge current [I n ] 10 ka 10 ka 15 ka Maximum discharge current [I max ] 30 ka 40 ka 40 ka Protection level (@ In) (Up) 250 V 250 V 300 V 390 V 450 V Protective fuses (if necessary) 20 A 20 A 20 A 50 A 50 A PSP Part Number DS240S-110DC DS240S-130DC DS240S-220DC DS240S-280DC DS240S-350DC Network voltage (Un) 110 Vdc 130 Vdc 220 Vdc 280 Vdc 350 Vdc Max. Operating Voltage (Uc) 150 Vdc 180 Vdc 275 Vdc 350 Vdc 460 Vdc Nominal discharge current (In) Maximum discharge current (Imax) 40 ka 40 ka 40 ka 40 ka 40 ka Protection level (@ In) (Up) 500 V 620 V 900 V 1200 V 1400 V Protective fuses (if necessary) 50 A 50 A 50 A 50 A 50 A Thermal Disconnector Dimensions Connection Disconnection indicator Remote signaling Mounting Operating temperature (ºC) Protection class Housing Material NF EN France IEC Intl UL1449 4th Ed. USA/Canada CSA C22.2 No. 8-M1986 Internal See diagram by screw terminal - cross section 1,5-10mm² (active wire) and 2,5-25mm² (earthing wire) 2 mechanical indicator (DS2x0S-xxDC) - by changeover contact Symmetrical rail (35mm) -40º C +85 C IP20 Thermoplastic UL94-V0 Low Voltage SPD - Test Class II Low Voltage SPD - Test Class II Type 4, Type 2 Location Class , Class PSP Products Inc Phoenix Drive, Manassas, VA 20110

29 Din Rail Plug-in Surge protectors for Telecom DLA, DLA2 Series Surge Protectors for phone and data lines Overview 2 and 4 pair Series Din Rail Surge Protection for Telephone ADSL/SDSL-SHDSL, ISDN, Fipway, Fieldbus-H2, 4-20mA, RS232 & RS485, MIC/T2 10 BaseT Products. Available from 6 to 150 DC voltage. 20,000 surge amp capacity. Pop out field replaceable modules. Features Din Rail mounted pluggable surge protector Multiple configurations for all applications Shielded wire protection With or without line cut capabilities 2-pair versions available (DLA2) Multiple grounding options UL 497B listed Removable module for easy maintenance Configuration Part number 1 pair 2 pairs Application DLA-170 DLA2-170 Telephone line ADSL-SDSL-SHDSL DLA-48D3 DLA2-48D3 ISDN-T0 48V line DLA-48DBC DLA2-48DBC Fipway-World Fip Fieldbus - H2 DLA-24D3 DLA2-24D3 Leased line 4-20 ma DLA-12D3 DLA2-12D3 RS232 RS485 DLA-06D3 DLA2-06D3 RS422 DLA-06DBC DLA2-06DBC MIC/T2 10 Base T Nominal Line Voltage (Un) 150 V 48 V 48 V 24 V 12 V 6 V 6 V Maximum Line Voltage (Uc) 170 V 53 V 53 V 28 V 15 V 8 V 8 V Maximum Line Current 300 ma 300 ma 300 ma 300 ma 300 ma 300 ma 300 ma Maximum Frequency >10 MHz >3 MHz >20 MHz >3 MHz >3 MHz >3 MHz >20 MHz Protection Level (Up) 8/20µs impulse - 5 ka 220 V 70 V 75 V 40 V 30 V 20 V 25 V Nominal Discharge Current [I n ] 8/20µs impulse - 10 times 10 ka 10 ka 10 ka 10 ka 10 ka 10 ka 10 ka Maximum Discharge Current [I max ] 8/20µs impulse - 1 time Impulse Current (limp) 10/350µs impulse - 2 times 5 ka 5 ka 5 ka 5 ka 5 ka 5 ka 5 ka End of life Short-circuit Short-circuit Short-circuit Short-circuit Short-circuit Short-circuit Short-circuit Mechanical characteristics Configuration DLA= 1 pair + shield / DLA2= 2 pairs + shield Mounting Symmetrical DIN rail Operating temperature -50 ºC to +85 ºC Wiring Connection by screw - min/max. cross section 0.4/1.5 mm 2 Housing material Thermoplastic UL 94-V0 Earth Connection Via DIN rail and screw terminal Replacement module DLA: DLAM-xxx / DLA2: DLA2M-xxx Versions DLA-xxx: Standard version (line continuity after removal of plug-in module) DLAW-xxx: Specific version (line cut-off after removal of plug-in module) DLAH-xxx: Remote supply version (maximum line current= 2.4A) DLA2-xxx: Standard version (line continuity in case of removal of plug-in modules) Standard compliance NF EN (France) UL 497B (USA) Surge protectors for communicating circuits - Test Categories C2 and D1 Surge protectors for communicating circuits Part number DLA DLA Contact us: sales@pspproducts.com 29

30 Universal Gas Tube Coaxial Surge Protectors P8AX Series High-Frequency Surge Protection Overview The P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular, GPS and CATV equipment against lightning surges and electrical transients. They are a first line of defense for your sensitive equipment. The P8AX series employs a patented gas tube, are waterproof (IP65) and available with three grounding options: M6 ground screw, bulkhead or optional mounting bracket. Features transient amps protection (8/20 μs) 5 ka transient amps protection (10/350 μs) DC Pass to +/-48V VSWR < 1.2 Insertion Loss < 0.1dB Bi-directional, series installed Waterproof Removable GDT Part Number P8AX09 P8AX25 P8AX50 Frequency Range DC-5 GHz DC-5 GHz DC-5 GHz DC Turn-On (Breakdown) V V 400- Technology Gas Discharge Tube Gas Discharge Tube Gas Discharge Tube lnsertion Loss 0.1 db 0.1 db 0.1 db Return Loss 20 db 20 db 20 db VSWR <1.2:1 <1.2:1 <1.2:1 lpeak (8/20 μs) Max Power 25 W 190 W 780 W Max current 10 A 10 A 10 A lmpedance 50 omhs 1 50 omhs 1 50 omhs 1 Connection Method Series (bi-directional) Series (bi-directional) Series (bi-directional) Connectors N, TNC, SMA, F, BNC, 7/16 N, TNC, SMA, F, BNC, 7/16 N, TNC, SMA, F, BNC, 7/16 Grounding M6 Screw, Bulkhead, Bracket M6 Screw, Bulkhead, Bracket M6 Screw, Bulkhead, Bracket Connectors N, TNC, SMA, F, BNC, 7/16 N, TNC, SMA, F, BNC, 7/16 N, TNC, SMA, F, BNC, 7/16 Environmental IP65 IP65 IP65 Rating -50 C to +85 C -50 C to +85 C -50 C to +85 C Operating Altitude 13,000 ft (4,000m) M6 Screw, Bulkhead, Bracket M6 Screw, Bulkhead, Bracket Relative Humidity up to 5 to 95% non-condensing, up to 100% up to 5 to 95% non-condensing, up to 100% up to 5 to 95% non-condensing, up to 100% Weight 4.4 oz 4.4 oz 4.4 oz 1 Impedance for F-Type Connector is 75 Ohms. 30 PSP Products Inc Phoenix Drive, Manassas, VA 20110

31 1, 2 and 4-Pair Phone Line Surge Protectors PB180BL, PB280BL, PB480BL Series Overview PB180BL, PB280BL and PB480BL series are wall mount phone line surge protectors designed to protect your sensitive telephone against harmful lightning surges and electrical transients. The PB Series utilizes a hybrid protection circuit consisting of high energy Gas Discharge Tubes (GDTs) and fast clamping diodes that offer an ultra fast response time (<1 ns) and a very high power handling capability of 20kA 8/20μs. These units automatically reset after each surge event. Features 1, 2, or 4 pair protection units All types of telephone and data lines Removable protection circuit board Wall or surface mount Maximum line current is 300 ma IEC UL4197B Characteristics 1-pair unit 2-pair unit 4-pair unit Application Configuration protected -PB180BL... -PB280BL... -PB480BL... Nominal line voltage (Un) Max. line voltage (Uc) Max. clamping voltage Protection Level (Up) Nominal discharge current (Up) Max. discharge current [I max ] Lightning Current (limp) Type of diagram End of Life Mounting Dimensions Wiring Housing material PB180BL PB280BL PB480BL Telephone line ADSL 1 pair 2 pairs 4 pairs 150V 170V 150V 220V 5kA 20kA 5kA A Short-circuit Wall mounts (screws not included) See dimensions on page 1 Screw terminal-wire size min/max: 22/16 AWG Thermoplastic UL94-V0 Contact us: sales@pspproducts.com 31

32 MJ6-1T Series Surge Protectors RJ11 Telecom Surge Protector Overview These units are designed to protect sensitive communication terminals (telephone sets, fax, modem, ADSL terminals...) connected to analog or digital telephone lines (PSTN or ADSL) from lightning surges and electrical transients. Features 1-pair Surge Protector for telephone line (PSTN or ADSL) RJ11 connector in/out Easy installation Wall mounting complies IEC standard Device Dimensions (in mm) Electrical Diagram Line R Protected equipment 25 GDT D R 4 25 GDT: 3-electrode gas tube R: Resistor D: Clamping diode network Characteristics PSP Part Number Application Bandwidth Nominal line voltage (Un) Maximum line voltage (Uc) Residual voltage (Up) Nominal discharge current [I n ] I/O connections Wiring Mounting Grounding MJ6-1T PSTN or ADSL 1-pair surge protection Up to 10 MHz 150 V 170 V 210 V 2.5 ka RJ11 female 3-4 Wall mounting through metal bracket By wire on equipment chassis 32 PSP Products Inc Phoenix Drive, Manassas, VA 20110

33 DS50PV Series Surge Protector 500 to 1000 Volts DC with 40,000 Amps Imax Features Designed with High Energy MOV s Modular Design for Ease of Maintenance Integrated Status Indicator Window Imax: 40 ka /pole at 8/20μs In: /pole at 8/20μs UL th Edition Recognized S50PVS - xxx Network Voltage «S» = Optional Remote Signaling Status PSP part number Maximum PV Voltage - Ocstc Protection Mode* Maximum Operating Voltage - Ucpv Current Withstand Short - Circuit - Iscwpv Operating Current to the voltage Ucpv - Icpv Leakage Current to the voltage - Ucpv - Ipe Nominal Discharge Current 15 x 8/20 μs Impulses - [I n ] Maximum Discharge Current 8/20 μs Withstand - [I max ] Protection Level (at In) - Up Mechanical characteristics Dimensions Connection End of life mode Disconnection indicator Remote Signaling of Disconnection Mounting Operating Temperature Protection Class Housing Material Thermal Disconnector Standards Compliance pren : Europe UL th Edition: USA Part Number S50PVS S50PVS S50PVS S50PVS S50PV S50PV S50PV S50PV Vdc See diagram dc 800 Vdc 1000 Vdc CM/DM 680 Vdc >1000 A <0.1 ma <0.1 ma 40 ka <2.5 kv By screw terminal: 4-25 mm² Disconnection of the SPD from PV line By mechanical indicator Option DS50 PVS - xxx Symmetrical rail 35 mm - 40 ºC + 85 C IP20 Thermoplastic UL94 - V0 Internal PV Surge Protection - Class I and II Testing - CM/DM 530 Vdc >1000 A <0.1 ma <0.1 ma 40 ka <1.8 kv Type 1CA (*)CM = Common mode (+/PE or -/PE) - DM = Differential mode (+/-) - CM/DM 840 Vdc >1000 A <0.1 ma <0.1 ma 40 ka <3 kv CM/DM 1060 Vdc <1000 A <0.1 ma <0.1 ma 40 ka <3.6 kv Type 1CA Contact us: sales@pspproducts.com 33

34 DC Signal Line Surge Protectors MJ8 Series - [I max ] ka Overview The MJ8 Series is designed to protect sensitive data-monitoring equipment connected to various network protocols from transient over voltages. The MJ8 Series surge protector is deployed in a RS- 485 signal network applications with data transmission speeds of up to1000 Mbps. The surge protector is housed in a shielded enclosure with high quality shielded RJ45 jacks. The transient protection circuit is based on high energy gas discharge tubes (GDT) and a network of fast response silicon avalanche diodes (SAD) to achieve sharp clamping of very large surge events. Dimensions (in mm) Electrical Diagram (MHz) P D Insertion Loss 100 MHz (MHz) 100 (MHz) (db) (db) red curve: maximum limit (Screw Lug) NEXT MHz Return Loss MHz (db) Characteristics PSP part number Max. data rate Max. DC supply Pinouts Nominal discharge currents: Line-Line Line-Ground Connections: Input Output Pinout Enclosure Ground connection Standard Compliance MJ8-CAT5E 1000 Mbps MJ8-12V 1000 Mbps MJ8-ISDN 1000 Mbps 8 Vdc 600 ma 18 Vdc 600 ma 60 Vdc 600 ma (1-2) (3-6) (4-5) (7-8) (1-2) (3-6) (4-5) (7-8) (3-6) (4-5) / /20 Shielded RL Connections Shielded RL Connections 2 wires + shielding + ground Metal Screw lug, Din Rail Clip or Mounting Flange IEEE 802-3af (transmission) IEC (surge withstand) MJ8-170V 1000 Mbps 180 Vdc 600 ma (1-2) (3-6) (4-5) (7-8) 34 PSP Products Inc Phoenix Drive, Manassas, VA 20110

35 Ship Board Surge Strip Z6-6 SP Surge Strip 6-Outlet US Navy Approved Overview Z6-6 (2P) Surge Stopper United States Navy Shipboard Surge and Noise Suppressor. With technology ahead of its time, the PSP Products Model Z6-6 (2P) shipboard surge suppressor has been specifically engineered and designed for shipboard use. It is approved for U.S. Navy shipboard use. The PSP Products Model Z6-6(2P) is a three-stage 1200 joule protection system that eliminates power surges and spikes, and significantly reduces line noise. The result of applying the Z6-6(2P) to your system is reliable working equipment and accurate data. Features 6 14/3 SJEOW heavy duty power cord Unconditional Lifetime Warranty Dual thermal fuses on Hot and Neutral 6 Outlets 6 foot 14/3 SJEOW heavy duty power cord 17 x 2 x 2 wide, meets IEE 587-B standard Specifications Model Z6-6 (2P) Z2-6 (2P) Z3-6 (2P) Z4-6 (2P) Noise Filter Specifications Dimensions 17 x2 x1-3/4 12 x2 x1-3/4 13-1/4 x2 x1-3/4 14-1/4 x2 x1-3/4 Weight 2.7 lbs. 2.1 lbs. 2.3 lbs. 2.4 lbs. Filter Modes Filter Range H N, N G, H G 10-80dB (100KHz to 30MHz) Surge Suppression Specifications Protection Modes Maximum Surge Joule Rating Response Time Voltage Clamping Beginning clamping Levels Cat A Ring Cat. B Ring Cat C Impulse Operating Temperature (ºC) Cont. Duty Rating H N, H G, N G 35 K Volts, 35 K Amps - 20,000,000 watts (8 x 20 ms surge pulse) 1,000 Joules Instantaneous 10 V above sine wave 6 Kv, 200 HZ, 35 V above sin 6 Kv, 500 A, 60 V above sin 6 Kv, 1.2 x 5 ms, 280 v -40º C to 80º C 125 V, 15 A Contact us: sales@pspproducts.com 35

36 PSP Model Number Nomenclature Typhoon and Hurricane Series Selection Chart Voltage Selections Fault Current Selections 1 120/240 Volt Single Phase WYE A 22 KAIC 2 120/208 Volt Three Phase WYE C 200 KAIC 3 120/240 Split Phase Delta High Leg /480 Volt Three Phase WYE 480 Volt Delta 347/olt Three Phase WYE olt 3 Phase Delta Enclosure Selections N Straight Nipple (Cooper 651S) With #10 Wire SFM Surface Flush Mount Hardwire HW Hardwire 8 220/380 Volt Three Phase WYE HWD Hardwire with Disconnect Volt 3 Phase Delta MHW Modular Hardwire Enclosure Selections 01 NEMA 1 MHWD C Modular Hardwire with Disconnect Surge Counter 04 4X 4XSS NEMA 4 NEMA 4X NEMA 4X Stainless Steel Hurricane Series Example H2C N-C H Hurricane Series Surge Current Selections ,000 Amps Per Phase ,000 Amps Per Phase ,000 Amps Per Phase ,000 Amps Per Phase ,000 Amps Per Phase 2 C N C 120/208 Volt Three Phase WYE Fault Current 200 KAIC Surge Current 200,000 per phase Enclosure NEMA 4 Connection Straight Nipple with #10 Wire Surge Counter 8535 Phoenix Drive Manassas, VA PSP Products Inc. has served the industrial, commercial, utility and residential markets for over twenty five years by providing superior products and services. From our humble beginnings in the office products industry, we have evolved into a forward-thinking company offering innovative products to meet the demand of an ever changing-market. We strongly believe that our customer is our most valuable asset. Unlike many of our larger competitors, we believe in working for our customers and conforming to meet their needs, not ours. We stand ready to assist in any way possible, supporting our customers through challenges and unique/urgent requirements they may encounter. Toll Free: Phone: