8300 Push Button Switches 16A 250Vac Miniature push button Ratings up to 16A, 250V ac 8A Inductive current rating Illuminated and nonilluminated
|
|
- Laurence Williams
- 5 years ago
- Views:
Transcription
1 8300 Push Button Switches 6 50ac Miniature push button Ratings up to 6, 50 ac 8 Inductive current rating Illuminated and nonilluminated Single and double pole Latching and momentary H slotted for custom act Industry standard panel cutout Bezel size: x 5mm 6(4) 50ac T85, E4 (0,000 Operations) () 50ac T05, E4 (0,000 Operations) 8(8) 50ac T05, 5E4 (50,000 Operations) 6(6) 50ac T5, 5E4 (50,000 Operations) 50ac DP, 3 50ac SP 50ac hp, 5ac /hp UL 85, file E45, S file LR0990 compliant 3mm contact gap. Technical data on pages 4 & 5. NON-LIT LIT B BLK B BLK MBER R RED R RED LER 5 NEON W WHITE W WHITE G GREEN 3 50 NEON R RED 7 INNDESENT H 8353 J E B R 53W ORDER FORMT TERMINL TUTOR TUTOR LMP OLTGE LEGEND & ODE ODE ODE ODE OLOR OLOR IF REQUIRED OPTIONS TERMINL TUTOR 0. pprovals & ratings vary with function Single pole switches use terminals & (& 3) 3 4 Standard actuator 6.3 x ON - OFF Single pole H Slotted for custom actuators Slots for snap-in buttons H ON - OFF (momentary ON) Single pole Square actuator K 4.8 x 0.8 s H but right angle 4.8 x ON - OFF with light Single pole 8304 ON - OFF (momentary ON) with light Single pole E Radiused actuator.6.8 x ON - OFF Double pole F Small round actuator T 835 ON - OFF (momentary ON) Double pole J Smooth curved actuator 36.6 Solder X 4.5 PB 0.8 Sq 3.7trs Dual pin PB (all factory for matrix dims) 8353 ON - OFF with light Double pole 8354 ON - OFF (momentary ON) with light Double pole 8355 ON - OFF Single pole Isolated light - switched 8356 ON - OFF Single pole Isolated light - unswitched M D Large round actuator ll actuators except H available lit
2 8350B H8353JE H8353EB T8350B T8353JE T8353EB H8353B T8353B H8350DB T8350DB H8350HB Example of actuator B Standard body Panel cut-out Bezel ut-outs must be punched in the direction of insertion E Softline style body with radiused bezel.9 X 5.0 Dimensions for snap-in fixing Panel thickness Dimension X / / /9.8.0 X and PB terminals. dditional dummy terminals may be supplied for extra support. OPTIONS Finish Matt finish standard except on J and D actuators which are gloss olor all factory for custom colors full range is available for large orders Legend printing Select from the examples or call factory for custom legends Special buttons Some of the many options are shown all the factory for the full range L67 Protective cover (designed to IP65) Snaps on to switch bodies fitted with or J style actuators but increases effective panel thickness by 0.8mm DIMENSIONS (mm) ctuator Body B.0 R0.5.0 ctuator J Body E R.0 R0.5 R9.6 R "ON" "OFF".7 "ON" "OFF" Spacing between centre of terminals & 3 or & 4 is mm Examples of legend printing ( ) is legend colour B-Black, W-White, R-Red 53(W) 5(W) 37
3 800 Push Button Switches 6 50ac Miniature push button Ratings up to 6, 50 ac 6(4) 50ac T85, E4 (0,000 Operations) () 50ac T05, E4 (0,000 Operations) 8(8) 50ac T05, 5E4 (50,000 Operations) 6(6) 50ac T5, 5E4 (50,000 Operations) Without button Sub panel mount 8 Inductive current rating Push on, solder or PB terminals Latching and momentary 50ac 50ac hp, 5ac /hp UL 85, file E45, S file LR0990 compliant 3mm contact gap. Technical data on pages 4 & 5. H 800 ORDER FORMT TERMINL TUTOR ODE ODE ODE ODE TERMINL TUTOR Standard actuator for snap-on custom adaptors x 0.8 H ON - OFF Single pole B Flat top actuator 5.5 K 4.8 x 0.8 s H, 4.8 x 0.8 Right angle urved top actuator.6 80 ON - OFF (momentary ON) Single pole x 0.8 T.6 Examples of possible actuation methods Using a Snap on adaptor X Solder 850 ON - OFF Double pole Facia 4.5 M PB 0.8 Sq trs Dual pin PB 0.8 Sq (all factory for matrix dims) Using a Hinged ctuator ON - OFF (momentary ON) Double pole 38 s, PB but Right angle
4 lternative ctuator Impact washer resists damage from excessive operator force 850 with impact washer M6 X80 K M800 Example of M800 DIMENSIONS (mm) Standard body body with H 4.8 terminals 8.9 body with right angle 4.8 terminals See dimensioned drawings for details s standard body but with side support peg for use with M PB terminals 6.0 sq On Full travel Off sq On Full travel Off.0trs trs.0trs See dimensioned drawings for details X and PB terminals. dditional dummy terminals may be supplied for extra support. body with M right angle PB terminals sq On O. /.3.6 Full travel O.6 / PB Hole details 6.5 Off Example of possible mounting styles.0trs 39
5 7000 Push Button Switches 6 50ac Round and rectangular push button switches Ratings up to 6, 50 ac Latching and momentary Illuminated & nonilluminated Matching indicators Low profile version Bezel sizes: 8mm dia 30 x 4mm In house test 6(4) 50ac T5 8(8) 50ac T85 UL S 6 Non Ind, 50ac hp, 5ac /hp UL65, file no. E45, S file no. LR dc compliant 3mm contact gap. Technical data on pages 4 & 5 (switches), 66 (indicators). NON-LIT LIT B BLK B BLK MBER R RED R RED LER 5 NEON W WHITE W WHITE G GREEN 3 50 NEON R RED 7 INNDESENT 7053 F W R ORDER FORMT TERMINL TUTOR TUTOR LMP OLTGE LEGEND & ODE ODE ODE ODE OLOR OLOR IF REQUIRED OPTIONS TERMINL TUTOR 7000 Single pole ON - OFF Round actuator shown in F body x Single pole ON - OFF (momentary ON) Round actuator shown in G body Single pole ON - OFF with light Single pole ON - OFF (momentary ON) with light B Round actuator - medium shown in F body ø. ø H Double pole ON - OFF Round actuator - long shown in F body ø. ø Double pole ON - OFF (momentary ON) x Double pole ON - OFF with light D Round actuator - sub panel mount ø Double pole ON - OFF (momentary ON) with light Indicator S Rectangular actuator Shown in body N/ for
6 7000F F F BF S G DF H --- OPTIONS DIMENSIONS (mm) Panel cut-outs F H G Body types fit either cut-out Finish Matt finish is standard on bodies Gloss finish is standard on actuators olor all factory for custom colors full range is available for large orders Panel thickness: mm F,G,H mm 5.0/5. Legend printing wide range is available or call the factory for custom legends O/ 3.5/3.7 Lamp voltage all factory for details of other available voltages O/ 5.0/5..0 Protective housing (E) (designed to IP65) overs are available for round body styles, call factory for details F Ø8.0 G button only OFF.0 ON Ø8.0.4/.3 H 7030 Indicator only ccepts lens only Ø8.0 ut-outs must be punched in the direction of insertion 9.8 4
7 00 Push Button Switches 0.5 5ac T T Miniature push button Ratings up to 500m, 50 ac Snap in and flange mount With and without button Gold plated contacts Latching and momentary In house test UL 0.5 5ac UL dc UL file E ac T85 compliant µ contact gap. Technical data on pages 4 & 5. ORDER FORMT T 00 B B B B B B BLK (applies for B actuator & body only) T00BB T TERMINL TUTOR TUTOR ODE ODE ODE ODE OLOR OLOR TERMINL TUTOR T 00 ctuator without button For purpose designed facias and sub-panels.9 B Snap-in fixing x "OFF". "ON" ON - OFF (alternate) Single pole 0 ON - OFF (momentary ON) Single pole sq Ø. 9.0 B Softline button Panel thickness Dimension X / / /9.8 Hole fixing Ø3. Dimensions (mm) T00 (Enclosure mounting) T00 ( Hole Fixing) No.4 self-tapping screws T00BB (Snap-in) ut-outs must be punched in the direction of insertion Min X Min "OFF" "ON" 4 7.6ctrs 7.6ctrs 7.6ctrs
8 In house test Self-Wiping - Slow Make & Break ac T85 compliant µ contact gap. Technical data on pages 4 & Push Button Switches ac Self wiping contacts Slow make & break Momentary action hoice of switch circuits hoice of actuators S L T096SO--- & T096LO --- T L S B BLK R RED Blank (for S or L actuator) (for S or L actuator) (for Stainless steel actuator) T 96 S B ORDER FORMT TERMINL TUTOR TUTOR ODE ODE ODE OLOR TERMINL TUTOR OPTIONS T 96 S Small ctuator Finish Gloss finish only Black base SP ON-OFF (momentary ON) only L Large ctuator Ø7. Panel ut-out (L & S actuators) olor all factory for custom colors full range is available for large orders Brown base SP ON-ON (momentary side) 98 Panel thickness Both nuts.5mm No backnut mm. Solder White base SP ON-OFF (momentary OFF) 99 andal Resistant IP66 Flat top Stainless steel Black base SP ON-ON (momentary side) 90 Ø9. Panel ut-out (stainless steel actuator) White base DP ON-OFF (momentary ON) Panel thickness 8.0mm Dimensions (mm) Nylon S and L actuators Stainless steel actuator (IP66) 6.3 Ø0.3 Ø6.0 Ø Ø0.3 Ø Neck thread - 40 TPI Whit. ctuator travel -.5 max Neck thread - 6 TPI Whit. ctuator travel -.5 max 43
9 340 Push Button Snap ction Switches 5(4) 50ac Snap action switches Ratings up to 6, 50 ac Round and rectangular buttons Stainless steel, IP68 vandal resistant button 6(4) 50ac 50E3 6 5/50ac 3/4hp T85 50E3 UL file no. E45 5 / HP, 50 3 /4 HP, 0.4 5dc, 0. 50dc compliant pprovals apply to switch mechanism only. µ contact gap. Full rating details and technical data on pages 50 & K BL RR PR ER ORDER FORMT Blank for switch only E R Red B Black P R Red B Black K R Red B Black BL Blue G Green W White R R Red B Black BL Blue G Green W White M R Red B Black BL Blue G Green W White S Stainless steel K BL TERMINL TUTOR TUTOR ODE ODE ODE OLOR TERMINL TUTOR OPTIONS R Rectangular bezel P Short.3 Ø.7. olor all factory for custom colors full range is available for large orders x K with satin chrome bezel M with nylon bezel Panel ut-out (N/ for actuator) Panel thickness Both nuts.5mm No backnut mm over M33 vailable for P actuator only x 0.5 ON - ON (momentary side) andal resistant Stainless steel chamfer profile bezel 34 Solder 6.4 Ø9. Panel ut-out (for actuator only) Panel thickness 8.0mm overs have internal nylon nut Dimensions (mm) R P & E K & M andal resistant designed to IP (P) (E)
Push Button Switches. Switches 163. Miniature, round and rectangular push button switches available
Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high
More informationPush Button Switches. 186 Switches. Miniature, round and rectangular push button switches available
Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high
More information8800 Thinline Rocker Switches 10A 250Vac
8800 Thinline Rocker Switches 0A 50Vac Ultra thin switch Ratings up to 5A, 50Vac Single and twin gang Panel cut out: Single 7.4 x 6.8 Twin 7.4 x 3.4 0(6)A 50Vac T00 6()A 50Vac T00 5E4 (50,000 Operations)
More informationSeries mm 21 x 21 mm 21 x 27 mm IP65 3 A 250 VAC. Product Profile. Ordering Guide Choice of front bezel determines front shape
Series 7.5 mm x mm x 7 mm IP65 3 50 V INDITOR pushbutton keylock selector hoose one component from each of the coloured sections to assemble a complete switch. Product Profile The Series 7 is a high quality,
More informationOrdering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
More informationDistinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
More informationINDICATOR LIGHTS SECTION R INDICATOR LIGHTS. Rectangular Indicator Lights. Round AC LED Indicator Lights. Large Format Indicator Lights
SECTION R Rectangular Indicator Lights Round Indicator Lights Large Format Indicator Lights Round DC LED Indicator Lights Round AC LED Indicator Lights Flashing Series LED Lights R3 R4 - R6 R7 R8 - R10
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
More informationModel 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
More informationELUM TM Series Right Angle Illuminated Latching Pushbutton
ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N..) Low height above PB Reliable self-cleaning contact Surface-mount or thru-hole PB Standard or custom actuator entral LED
More informationELUM TM Series Right Angle Illuminated Latching Pushbutton
Right ngle Illuminated Latching LED FREE OMPTIBLE OPTI Features/Benefits SPDT (N.O. & N..) Low height above PB Reliable self-cleaning contact Surface-mount or thru-hole PB Standard or custom actuator entral
More information1000 series. Compact fingertip controllers switching technology DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS
JOY-1000-1807 JOYSTICKS DISTINCTIVE FEATURES One or two axis 5 A 16 A switch solutions Single or double pole Bushing or screw mount Variety of handle options ENVIRONMENTAL SPECIFICATIONS Operating Temperature:
More informationSwitches and Indicators.
E1 Switches and Indicators Switches and Indicators Series Description Product Assembly Product Range - pushbutton for standard mounting - accessories / spare parts Technical Data Technical Drawing /Dimension
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1 NPN 1 1 Maximum current 5A 28VDC
More informationHMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm
Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More information3 Series Thumbwheel Switches
Features/Benefits Most complete product offering in the industry Spacers available to fit most panel cutouts Front or rear mounting options Illuminated models available Typical Applications Test & measurement
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationGeneral Specifications
Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard
More information1000 series Compact switch joysticks
Distinctive features and specifications Compact size Robust construction Single or dual axis Single or double pole Gold contacts Bushing or screw mount V4 switches V3 switches Alternative handle selection
More informationUniversal indicator body for flush mount, black plastic. Part No Flush mount adapter determines round, square or rectangular
Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the colored sections to assemble a complete switch. For other options or further
More informationActuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
More informationSee Figure 1 Panel Cutout diagram for 6 button module mounting dimensions. Refer to drawings for other module dimensions.
Series 8 Lightable FETURES /6" Between Button Centers Long, Stroke, Wiping Contact Lightable Modules Choice of 5 Circuitries with Modules User Legendable Mounting Build a custom keyboard with identical
More informationSeries Panel Mounted Control Devices
E_Master2012.qxd:NEW_E_Master_temp.qxd 1/27/12 4:28 PM Page 1 Series Features: Suitable for hazardous and corrosive locations. Installation is easy and precise. Devices fit into a standard 30.5mm, 1.2"
More informationILLUMINATED PUSHBUTTON SWITCH
Jay-El P/N 10888 JAY-EL 10888 JAY-EL P/N 10888 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-2288 Catalog No. 081 11-03 GOLD CONTACTS Sea Level and 0,000 Feet JAY-EL 10888 ENGINEERING SPECIFICATIONS
More informationGeneral Specifications
Series F Ultra-Thin Process Sealed Tactiles General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength:
More informationSUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent
More informationJAY-EL JAY-EL P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
Jay-El P/N JAY-EL JAY-EL P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S- Catalog No. - For more information, contact our sales team at.. or hmisales@ducommun.com GOLD CONTACTS Sea Level
More informationGeneral Specifications
General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal
More informationPushbutton Switches, 16mm, Illuminated
Pushbutton Switches, 16mm, lluminated lluminated Pushbuttons are instrument-grade switches having snap-acting double break contacts, silver clad and gold plated to satisfy the requirements of logic level
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationIlluminated Pushbutton Switches
Illuminated Pushbutton Switches RoHS Compliant Features. Full Face Illumination 3. Two Mounting Methods 4. Snap-Action Mechanism Approvals UL File No.E4375 CSA File No.LR38341 Component Fil Illuminated
More informationGeneral Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over
More informationLUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31
TAST General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp
More informationELUM TM Series Right Angle Illuminated Latching Pushbutton
LED FREE COMPTIBLE OPTION ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard
More informationPin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
More informationMiniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
More information1000 SERIES - MICROSWITCH JOYSTICKS COMPACT SIZE ROBUST CONSTRUCTION SINGLE OR DUAL AXIS VERSATILE SINGLE OR DUAL POLE ALTERNATIVE KNOB SELECTION
5.9 0.28 3.95 APEM 4.75APEM 3.6 18.5 1000 SERIES - MICROSWITCH JOYSTICKS COMPACT SIZE ROBUST CONSTRUCTION SINGLE OR DUAL AXIS VERSATILE SINGLE OR DUAL POLE ALTERNATIVE KNOB SELECTION IP65 ABOVE PANEL BUSH
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationCat. No. 800B-EPA 800B-EPB 800B-EPC 800B-EPD. Cat. No. 800B-ALB4. Cat. No.
Bulletin B mm Push Buttons Product Overview/Specifications Bulletin B mm Push Buttons Designed to worldwide standards (UL, CSA, CE, and CCC) Durable materials Operators are made of corrosion-proof plastic
More informationL Series Miniature Slide Switches
Features/Benefits Positive detent Enclosed housing Maintained and momentary functions PC and panel mounting RoHS compliant Typical Applications Communications equipment Lighting devices Models Available
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................
More informationGeneral Specifications
Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS CWT
More informationseries Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
More informationGeneral Specifications
Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other
More informationNE-18 Series Mains / Power Switches
Features/Benefits Chassis or panel mount Various buttons Various contact configurations RoHS compliant Typical pplications Mains/power switching Consumer electronics udio equipment Digital products Specifications
More informationSERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
More informationContents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC
Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker
Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.
More informationC&K S2 Series Subminiature Thumbwheel Switches
Features/Benefits Front & rear mounting options available Variety of function codes Spacers available to fit most panel cutouts Typical Applications Test & measurement equipment Instrumentation Computer
More informationGeneral Specifications
Series Illuminated Low Profile Process Sealed Tactiles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles General Specifications
More informationC5 Series Stainless Steel Photoelectric
C5 Series Stainless Steel Photoelectric Part Number Sensing Range M5 (5 mm) stainless steel - DC 14 models available Diffuse and through-beam styles Long operating distances Compact stainless steel housing
More informationSpecial-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
More informationTerminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
More informationSwitches & Pilot Devices
ø0mm - Series Signaling Lights Key features: Wide variety of heavy-duty oiltight cam switches Operators available up to positions Switches made with a double circuit contact block Contact blocks rated
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size (/ size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact
More informationUniversal Tongue-Operated Safety Interlock Switch
Rev. 12.07 C R US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 UL and C-UL listed, B approved T12 Universal Tongue-Operated Safety Interlock Switch Strong and versatile the compact size of the strong,
More informationPush Buttons and Operator Interface New Product Catalog XAL Control Stations
Push Buttons and Operator Interface New Product Catalog XAL Control Stations CONTENTS Description.................................................... Page General Information................................................104
More informationHigh-current Dual-current
Sealed V Sealed IP 67 protection Nominal ratings. A to A/5 VAC Minimum rating ma/ VDC Operating temperature - C to +5 C Choice of actuators with possible fixing positions Main specifications High-current
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...
Magnetic and Hydraulic-Magnetic Circuit Breaker 830-F... Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...
Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics (S-type MO or
More information8 mm series. General data. Content. Pushbuttons 1-3
General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content series, illuminated pushbutton, 42
More informationStainless Steel Push Button
PUSH BUTTON Push Button MSW - 1201/1202/1601/1602/1901/1902/201/202 The mitec s buttons are designed to serve the general purpose of panel-mounted switches with long term and extreme usage situations.
More informationSwitches & Pilot Devices
Key features: 21/64 (8mm) round mounting hole Compact Design Saves Space Bright and Vivid Illumination Choice of Shapes and Functions old Clad Silver Contacts for reliable low level switching Snap action
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More information16 Mm. Bulletin 800B 16 mm Push Buttons. Features. Operator Assembly Sequence. Push Button & Pilot Light Operators. Build a Catalog Number
16 Mm Bulletin 800B 16 mm Push Buttons Build a Catalog Number Features Designed to worldwide standards (UL, CSA, CE, and CCC) Durable materials Operators are made of corrosion-proof plastic to ensure long
More informationDistinctive Characteristics
Low Profile Process Sealed Tactiles Series J Distinctive Characteristics Special bracket for right angle mounting provides added design variations. igher operating force type provides more pronounced operating
More informationORDER GUIDES WITH STEEL ROD ACTUATORS WITH HIGH STRENGTH THERMOPLASTIC ROD ACTUATORS*
For application help: call 1-800-537-6945. Honeywell MICRO SWITCH Sensing and Control 89 Style 1 Style 2 Style 3 Style 4 Style 5 Style 6 Style 7 Style 8 Automatically cut power when service door or drawer
More informationToneluck Switches PBN MPN MPV LTV. PWL MQS-1 MQS-1s MQS-2 THK-1 KEY SP DS
Toneluck Switches PBN MPN MPV LTV PWL MQS-1 MQS-1s MQS-2 THK-1 KEY SP DS PB Push button switch Characteristics Exclusive spring loaded contacts with audio bridge point make the perfect mechanism for long
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More information8 mm Series. General data. Content
General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content Series, illuminated pushbutton, 42
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationA-100G6 - Basic frame assembly diagram
doepfer System A - 100 Rack system A-100 G A-100G6 - Basic frame assembly diagram Parts: 1 Rail with lip, and with tapped hole strip inserted (with M3 threads). 2 Rail with lip, with three M3 hexagon nuts
More informationOiltight Switches & Pilot Devices
LED and Incandescent ilot Lights (Sub-Assembled) Removable Terminal* + Operator + Lamp + Lens = Completed Unit * Removable terminals are applicable for CB terminated types only. art Numbers: ilot Light
More informationOrdering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
More informationAdd S to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
Sealed Subminiature Snap ction Switch D2HW Smallest Sealed Snap-ction Switch in the Industry With a Long Stroke For Reliable ON/OFF ction Conforms to IP67 Case dimensions 22% smaller than conventional
More information22mm Non Illuminated Metal Operators
22mm 22mm Non Illuminated Metal Operators Altech Corp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call.
More informationLUMOTAST FK. General data. Content. Pushbuttons 1-9
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
More informationOnly 19.8mm depth behind panel with built-in resistor
Miniature Lighted Pushbutton Switch R Only 19.8mm depth behind panel with built-in resistor Built-in Resistor LED illumination makes free from wiring resistor. FEATURES Depth behind panel : Only 19.8mm
More informationFCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
More informationVandal-proof latching action switch MSM LA
Product Manual Vandal-proof latching action switch MSM LA CONTENTS 1 PRODUCT DESCRIPTION... 2 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS... 2 2.1 Technical Data... 2 2.2 Dimensional Drawings... 5 2.3 Hole
More informationDevices raised mounting
Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and
More informationCombination Display Lights
TCL0/TCT0 Super Bright LED unit improves visibility and safety Four types of illumination faces to choose from. Compact combination display lights. Basic Size: Size S Super bright LED unit The insulated
More informationSealed snap-action pushbutton switches bushing Ø 12 mm momentary
SW-IM-709 DISTINCTIVE FEATURES Snap-action : tactile feedback with audible click High current/voltage rating Sealed to IP67 Flat round actuator for optional marking NO+NC ENVIRONMENTAL SPECIFICATIONS Front
More information74 PS range Push-buttons, selectors and indicators Ø 22mm
74 PS range Push-buttons, selectors and indicators Ø 22mm Push-buttons, selectors, indicators and 22mm diameter pre-drilled technopolymer enclosures. Ideal for the creation of signalling and control units
More informationCondensed Catalog. Your Expert Partner for Human Machine Interfaces
Condensed Catalog Your Expert Partner for Human Machine Interfaces How to use this catalog The objective of this catalog is to provide engineers and purchasers with a quick and easy search facility for
More informationA16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Separate Construction with Cylindrical 16-dia. Body Miniature design of 28.5 mm, the smallest class in the industry. Detachable
More informationK1F037MCH cam voltmeter switch - 3L and 3L-N A - for Ø 22 mm
Characteristics cam voltmeter switch - 3L and 3L-N - 60-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationPCB Keyswitches Product Survey Versions Recommended Key grid Illumination Keyswitch Signal indicator Keyswitch height Contacts RACON 8 12 mm Non-illum
PCB Keyswitches Page RACON short-travel keyswitches - 5 RACON 8-6 RACON 12-10 RACON 12 V with vertical adapter - 1 RACON 12 i - 16 RACON special accessories - 20 RF short-travel keyswitches - 23 RF 15
More informationSpecial-Purpose Proximity Sensor E2C
Special-Purpose Proximity Sensor E2C Cylindrical Inductive Sensors with Separate Amplifiers Provide Variable Detecting Capabilities Separate amplifier allows sensor to fit in space-confined sites, providing
More informationSpecifications. Description TABLE OF CONTENTS. Page. Description 2. Specifications 2 3. Additional Options 3. How to Order 4 5
TABLE OF CTENTS Page Description Specifications Additional Options How to Order Circuit Descriptions Dimensions 0 Icons into the body of the switch; mounting hardware or special tools are not necessary.
More information1776/1976 Series. NOTE: 1300 Series pushwheel switch discontinued, 1400 series is suggested replacement.
EECO's 1400 series switches feature snap-in front mounting in a large, easy to use package size. These switches snap together, allowing the user to create multiswitch assemblies quickly and easily without
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationPile Driver Weld Immune Sensors
DC... 190 8, 12, 18, and 30 mm Diameter... 190 3- and 4-Wire DC... 192 8, 12, 18, and 30 mm Diameter... 192 AC/DC... 194 12, 18, and 30 mm Diameter... 194 Pile Driver Sensors P+F s weld immune Pile Driver
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More informationDistinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
More informationpage 28 page 30 page 30 page 31
25 Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic on-off to multifunction applications. page 28 page 30 page 30 page 31 _Section_0512.indd
More informationPERCENT OF RATED CURRENT
A-D Series Time Delay Values PERCENT OF RATED CURRENT NOTES: UL489 C-Series Breakers available with Delay Curves 11, 12, 14, 16, 21, 22, 24, 26, 42, 44, 46. Delay Curves 11,12,14,16,21,22,24,26,42,44,46,52,54,56:
More information