Wiring diagram POWERdrive 562/S, 562/A (PW0562S1, PW0562A1)

Transcription

1 Wiring diagram, 562/A (PW0562S1, PW0562A1) Pay attention when connecting the LED groups: polarity reversal results in no light output and often damages the LEDs 3 LED groups 3 control channels + - LEDcode / NTC 1 2 AWG mm 2 DMX in + DMX in - DMX in shield 9 mm 0.35 inch L N VAC WARNING: Disconnect power before wiring the LED fixtures. Connecting the fixtures to a live driver will immediately and permanently damage the LEDs WARNING: Risk of electrical shock. May result in serious injury or death. Disconnect power before servicing or installing. CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs. LED groups Indicates the location of the connectors for your LED groups. R(ed) represents channel 1, G(reen) represents channel 2 and B(lue) represents channel 3. The default group color allocation can be changed using the TOOLbox pro and freely available FluxTool application. Maximum wiring distance at full load (from LED driver to LED load): AWG value Distance (m) Distance (ft) Please observe voltage drop over long cable lengths. Longer cable lengths increase EMI susceptibility. LEDcode/NTC The LEDcode/NTC interface allows connection of a 47kΩ NTC thermistor for closed loop thermal control. The NTC throttle temperature is programmable through the freely available FluxTool software (see Configuring your driver over DMX in ). DMX in Use these connectors when the driver is used in a DMX network. Connect the network cable s DMX+, DMX- and DMX shielding wire (the orange/white, orange and brown wire in a CAT5 cable) to the DMX in+, DMX in- and DMX in shield connector respectively. Configuring your driver over DMX in Download the FluxTool software from your eldoled driver s product web page and connect a TOOLbox pro to DMX in to configure your driver. You can configure: Various DMX parameters Dimming curve Minimum dimming level NTC throttle temperature LED drive current per output: from 200mA-1,050mA in 1mA steps VAC The driver has been designed for use with universal mains voltage input of VAC, 50/60Hz, or with DC input of V (emergency lighting) eldoled. All rights reserved. V1.1 More documentation and eldoled s terms and conditions are available at

2 Datasheet POWERdrive 50W 50W DMX Full-Colour (RGB) Dimmable LED Drivers Input characteristics Input voltage AC Input voltage DC V Input current Input frequency V (ENEC approved) V (UL approved) 0.7A max 50-60Hz full load 89% 2/3 load 85% Power full load >0.9 full load <20% Inrush current Surge protection Standby power Output characteristics LED output power LED output current range negligible: 277V 1kV DM, 2kV CM <0.5W 50W max 200-1,050mA (settable per output) LED output current resolution programmable in 10mA steps LED output current tolerance +/- 5% LED outputs 3 (UL Class 2) LED output voltage range 2-55V Control characteristics Control channels 3 Dimming protocol DMX / RDM Dimming range 100%-0% Dimming method Dimming curve Driver configuration Hybrid HydraDrive linear, logarithmic, square with TOOLbox pro and FluxTool software Product offering P/N: PW0562A1 POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 55V outputs, square metal/plastic P/N: PW0562S1 POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 55V outputs, square metal Order number configuration ma P/N LED output current Dimming curve P/N: for LED driver part number, see 'Product offering' above. LED output current: in 10mA steps, e.g. "0260", "1010", etc. Dimming curve: enter "LOG" for logarithmic, "LIN" for linear, or "SQU" for square dimming curve. Protection LED output short LED output cross short Overload Reverse polarity Restart after protection, for LED output 2015 eldoled. All rights reserved. V4.2 More product documentation and eldoled's warranty and terms and conditions are available at

3 Datasheet POWERdrive 50W Dimensions, weight and packaging 152.5x76x30.1mm / 6x2.99x1.19in 372 g / oz 6 or 45 pcs 130x76x30mm / 5.12x2.99x1.18in 350 g / oz 6, 10 or 45 pcs Standards and certifications Standards compliance EN /-2-13, 62384, 55015, 55022, , UL, Recognized Component UL 1310, UL 8750 (Class 2 output) FCC 47 CFR Part 15 class B RoHS RoHS2 Certifications Wiring Specifications Wiring diagrams Wire type Wire strip length AWG 20-16, mm² solid or stranded copper 9mm / 0.35in, 562/S Thermal protection External NTC thermistor External thermistor value Recommended thermistors 70 C / 158 F (settable) 47kΩ (leaded) NTCASCWE3473J (screw) Thermal specification Ta operating range -20 ºC ºC / -4 ºF ºF Tc max 85 ºC / 185 ºF Tc lifetime 78 ºC / 172 ºF Warranty Warranty period 3 years Europe, Rest of World eldoled B.V. Science Park Eindhoven ED Son The Netherlands E: sales@eldoled.com North America eldoled America One Lithonia Way Conyers, GA USA E: nasales@eldoled.com

4 Specification Submittal POWERdrive's dynamic response can be tuned to fit any content - from exceptionally smooth fades in architecture to fast-paced video in entertainment. Symbiosis ensures the LED driver works seamlessly together with LED modules, controls and intelligent luminaire elements. POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 55V outputs, square metal Features Natural dimming, continuous to dark (Hybrid HydraDrive) Application-specific dynamic response Symbiosis: add value with sensing, connecting, protecting, tooling, communicating, sharing and lighting dynamics features Electrical specifications Driver type constant current LED outputs 3 (UL Class 2) LED output power LED output current range 50W max 200-1,050mA. Settable per output. LED output current resolution programmable in 10mA steps LED output voltage range 2-55V Standy power Input voltage AC <0.5W Input voltage DC V Input current Inrush current Surge protection full load 89% V (ENEC approved) V (UL approved) 0.7A max 2/3 load 85% Power full load negligible: 277V 1kV DM, 2kV CM >0.9C full load <20% Dimming protocol Control channels 3 DMX/RDM Ta operating range -20 C C / -4 F F Tc max 85 C / 185 F Tc lifetime 78 C / F IP rating IP66 if used in DRYverbox 50/S Warranty 3 years Flicker-free dimming to 0% Thermal foldback Turn on time less than one second Certifications & standards EN /-2-7/-2-13, EN 62384, EN 55015, EN 55022, EN , EN UL 1310, UL 8750 (Class 2 output) Dimensions, weight, packaging Wiring Order number configuration P W S 1 130x76x30mm / 5.12x2.99x1.18in 350 g, oz 6, 10 or 45 pcs ma P/N LED output current Dimming curve LED output current: in 10mA steps, e.g. "0260", "1010", etc. Dimming curve: enter "LOG" for logarithmic, "LIN" for linear, or "SQU" for square dimming curve. Project name: Project number: LED driver order number: Contact details: Europe, Rest of World eldoled B.V. Science Park Eindhoven ED Son The Netherlands sales@eldoled.com North America eldoled America One Lithonia Way Conyers, GA USA nasales@eldoled.com 2015 eldoled. All rights reserved. V1.0b More product documentation and eldoled's warranty and terms and conditions are available at

5 Tech sheet POWERdrive 561/M, 56*/A, 56*/S AC Series Electrical specifications Input Voltage: V AC, 50-60Hz V DC V AC, 50-60Hz (UL approved) Current, max: 0.7A Output Power: 50W max Voltage: 55V max Current range: 200-1,050 ma (configurable) Current: +/- 5% accuracy General Standby power: < 0.5W Inrush current: negligible, 30mA 2 277V Surge protection: 1kV differential mode surge, 2kV common mode surge Efficiency: 89% at full load, 85% above 67% load Power factor: > 0.9 THD: <20% between 67% and 100% load DMX / RDM: USITT DMX512A and ANSI E1.20 (explore & address) Three (562) or four (561) LED outputs Dimensions, weight and packaging POWERdrive 561/M : 360 g, 12.7 oz Packaging: 8 or 28 pcs/carton 0.5mm/0.19 (M4/M5) POWERdrive 561/M 436 mm / mm / mm mm / 0.83 \ POWERdrive 561/A, 562/A : 372 g, oz Packaging: 6 or 45 pcs/carton mm / 4.68 ø 5 mm / 0.19 (M4/M5) 66.4 mm mm mm / mm / 1.19 POWERdrive 561/S, 562/S : 350 g, oz Packaging: 6, 10 or 45 pcs/carton mm / 4.68 ø 5 mm / 0.19 (M4/M5) 66.4 mm mm mm / mm / eldoled. All rights reserved. V1.5 1/4